summaryrefslogtreecommitdiffstats
path: root/scripts/tracing/ftrace-bisect.sh
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-11 08:27:49 +0000
commitace9429bb58fd418f0c81d4c2835699bddf6bde6 (patch)
treeb2d64bc10158fdd5497876388cd68142ca374ed3 /scripts/tracing/ftrace-bisect.sh
parentInitial commit. (diff)
downloadlinux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.tar.xz
linux-ace9429bb58fd418f0c81d4c2835699bddf6bde6.zip
Adding upstream version 6.6.15.upstream/6.6.15
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'scripts/tracing/ftrace-bisect.sh')
-rwxr-xr-xscripts/tracing/ftrace-bisect.sh134
1 files changed, 134 insertions, 0 deletions
diff --git a/scripts/tracing/ftrace-bisect.sh b/scripts/tracing/ftrace-bisect.sh
new file mode 100755
index 0000000000..bb4f59262b
--- /dev/null
+++ b/scripts/tracing/ftrace-bisect.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Here's how to use this:
+#
+# This script is used to help find functions that are being traced by function
+# tracer or function graph tracing that causes the machine to reboot, hang, or
+# crash. Here's the steps to take.
+#
+# First, determine if function tracing is working with a single function:
+#
+# (note, if this is a problem with function_graph tracing, then simply
+# replace "function" with "function_graph" in the following steps).
+#
+# # cd /sys/kernel/tracing
+# # echo schedule > set_ftrace_filter
+# # echo function > current_tracer
+#
+# If this works, then we know that something is being traced that shouldn't be.
+#
+# # echo nop > current_tracer
+#
+# Starting with v5.1 this can be done with numbers, making it much faster:
+#
+# The old (slow) way, for kernels before v5.1.
+#
+# [old-way] # cat available_filter_functions > ~/full-file
+#
+# [old-way] *** Note *** this process will take several minutes to update the
+# [old-way] filters. Setting multiple functions is an O(n^2) operation, and we
+# [old-way] are dealing with thousands of functions. So go have coffee, talk
+# [old-way] with your coworkers, read facebook. And eventually, this operation
+# [old-way] will end.
+#
+# The new way (using numbers) is an O(n) operation, and usually takes less than a second.
+#
+# seq `wc -l available_filter_functions | cut -d' ' -f1` > ~/full-file
+#
+# This will create a sequence of numbers that match the functions in
+# available_filter_functions, and when echoing in a number into the
+# set_ftrace_filter file, it will enable the corresponding function in
+# O(1) time. Making enabling all functions O(n) where n is the number of
+# functions to enable.
+#
+# For either the new or old way, the rest of the operations remain the same.
+#
+# # ftrace-bisect ~/full-file ~/test-file ~/non-test-file
+# # cat ~/test-file > set_ftrace_filter
+#
+# # echo function > current_tracer
+#
+# If it crashes, we know that ~/test-file has a bad function.
+#
+# Reboot back to test kernel.
+#
+# # cd /sys/kernel/tracing
+# # mv ~/test-file ~/full-file
+#
+# If it didn't crash.
+#
+# # echo nop > current_tracer
+# # mv ~/non-test-file ~/full-file
+#
+# Get rid of the other test file from previous run (or save them off somewhere).
+# # rm -f ~/test-file ~/non-test-file
+#
+# And start again:
+#
+# # ftrace-bisect ~/full-file ~/test-file ~/non-test-file
+#
+# The good thing is, because this cuts the number of functions in ~/test-file
+# by half, the cat of it into set_ftrace_filter takes half as long each
+# iteration, so don't talk so much at the water cooler the second time.
+#
+# Eventually, if you did this correctly, you will get down to the problem
+# function, and all we need to do is to notrace it.
+#
+# The way to figure out if the problem function is bad, just do:
+#
+# # echo <problem-function> > set_ftrace_notrace
+# # echo > set_ftrace_filter
+# # echo function > current_tracer
+#
+# And if it doesn't crash, we are done.
+#
+# If it does crash, do this again (there's more than one problem function)
+# but you need to echo the problem function(s) into set_ftrace_notrace before
+# enabling function tracing in the above steps. Or if you can compile the
+# kernel, annotate the problem functions with "notrace" and start again.
+#
+
+
+if [ $# -ne 3 ]; then
+ echo 'usage: ftrace-bisect full-file test-file non-test-file'
+ exit
+fi
+
+full=$1
+test=$2
+nontest=$3
+
+x=`cat $full | wc -l`
+if [ $x -eq 1 ]; then
+ echo "There's only one function left, must be the bad one"
+ cat $full
+ exit 0
+fi
+
+let x=$x/2
+let y=$x+1
+
+if [ ! -f $full ]; then
+ echo "$full does not exist"
+ exit 1
+fi
+
+if [ -f $test ]; then
+ echo -n "$test exists, delete it? [y/N]"
+ read a
+ if [ "$a" != "y" -a "$a" != "Y" ]; then
+ exit 1
+ fi
+fi
+
+if [ -f $nontest ]; then
+ echo -n "$nontest exists, delete it? [y/N]"
+ read a
+ if [ "$a" != "y" -a "$a" != "Y" ]; then
+ exit 1
+ fi
+fi
+
+sed -ne "1,${x}p" $full > $test
+sed -ne "$y,\$p" $full > $nontest