Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 752 insertions, 0 deletions

diff --git a/sound/pci/ice1712/se.c b/sound/pci/ice1712/se.c
new file mode 100644
index 0000000000..ffa9d8860a
--- /dev/null
+++ b/sound/pci/ice1712/se.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ *   Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI
+ *
+ *	Copyright (c) 2007 Shin-ya Okada  sh_okada(at)d4.dion.ne.jp
+ *                                        (at) -> @
+ */      
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "se.h"
+
+struct se_spec {
+	struct {
+		unsigned char ch1, ch2;
+	} vol[8];
+};
+
+/****************************************************************************/
+/*  ONKYO WAVIO SE-200PCI                                                   */
+/****************************************************************************/
+/*
+ *  system configuration ICE_EEP2_SYSCONF=0x4b
+ *    XIN1 49.152MHz
+ *    not have UART
+ *    one stereo ADC and a S/PDIF receiver connected
+ *    four stereo DACs connected
+ *
+ *  AC-Link configuration ICE_EEP2_ACLINK=0x80
+ *    use I2C, not use AC97
+ *
+ *  I2S converters feature ICE_EEP2_I2S=0x78
+ *    I2S codec has no volume/mute control feature
+ *    I2S codec supports 96KHz and 192KHz
+ *    I2S codec 24bits
+ *
+ *  S/PDIF configuration ICE_EEP2_SPDIF=0xc3
+ *    Enable integrated S/PDIF transmitter
+ *    internal S/PDIF out implemented
+ *    S/PDIF is stereo
+ *    External S/PDIF out implemented
+ *
+ *
+ * ** connected chips **
+ *
+ *  WM8740
+ *      A 2ch-DAC of main outputs.
+ *      It setuped as I2S mode by wire, so no way to setup from software.
+ *      The sample-rate are automatically changed. 
+ *          ML/I2S (28pin) --------+
+ *          MC/DM1 (27pin) -- 5V   |
+ *          MD/DM0 (26pin) -- GND  |
+ *          MUTEB  (25pin) -- NC   |
+ *          MODE   (24pin) -- GND  |
+ *          CSBIW  (23pin) --------+
+ *                                 |
+ *          RSTB   (22pin) --R(1K)-+
+ *      Probably it reduce the noise from the control line.
+ *
+ *  WM8766
+ *      A 6ch-DAC for surrounds.
+ *      It's control wire was connected to GPIOxx (3-wire serial interface)
+ *          ML/I2S (11pin) -- GPIO18
+ *          MC/IWL (12pin) -- GPIO17
+ *          MD/DM  (13pin) -- GPIO16
+ *          MUTE   (14pin) -- GPIO01
+ *
+ *  WM8776
+ *     A 2ch-ADC(with 10ch-selector) plus 2ch-DAC.
+ *     It's control wire was connected to SDA/SCLK (2-wire serial interface)
+ *          MODE (16pin) -- R(1K) -- GND
+ *          CE   (17pin) -- R(1K) -- GND  2-wire mode (address=0x34)
+ *          DI   (18pin) -- SDA
+ *          CL   (19pin) -- SCLK
+ *
+ *
+ * ** output pins and device names **
+ *
+ *   7.1ch name -- output connector color -- device (-D option)
+ *
+ *      FRONT 2ch                  -- green  -- plughw:0,0
+ *      CENTER(Lch) SUBWOOFER(Rch) -- black  -- plughw:0,2,0
+ *      SURROUND 2ch               -- orange -- plughw:0,2,1
+ *      SURROUND BACK 2ch          -- white  -- plughw:0,2,2
+ *
+ */
+
+
+/****************************************************************************/
+/*  WM8740 interface                                                        */
+/****************************************************************************/
+
+static void se200pci_WM8740_init(struct snd_ice1712 *ice)
+{
+	/* nothing to do */
+}
+
+
+static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice,
+						unsigned int rate)
+{
+	/* nothing to do */
+}
+
+
+/****************************************************************************/
+/*  WM8766 interface                                                        */
+/****************************************************************************/
+
+static void se200pci_WM8766_write(struct snd_ice1712 *ice,
+					unsigned int addr, unsigned int data)
+{
+	unsigned int st;
+	unsigned int bits;
+	int i;
+	const unsigned int DATA  = 0x010000;
+	const unsigned int CLOCK = 0x020000;
+	const unsigned int LOAD  = 0x040000;
+	const unsigned int ALL_MASK = (DATA | CLOCK | LOAD);
+
+	snd_ice1712_save_gpio_status(ice);
+
+	st = ((addr & 0x7f) << 9) | (data & 0x1ff);
+	snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK);
+	snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK);
+	bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK;
+
+	snd_ice1712_gpio_write(ice, bits);
+	for (i = 0; i < 16; i++) {
+		udelay(1);
+		bits &= ~CLOCK;
+		st = (st << 1);
+		if (st & 0x10000)
+			bits |= DATA;
+		else
+			bits &= ~DATA;
+
+		snd_ice1712_gpio_write(ice, bits);
+
+		udelay(1);
+		bits |= CLOCK;
+		snd_ice1712_gpio_write(ice, bits);
+	}
+
+	udelay(1);
+	bits |= LOAD;
+	snd_ice1712_gpio_write(ice, bits);
+
+	udelay(1);
+	bits |= (DATA | CLOCK);
+	snd_ice1712_gpio_write(ice, bits);
+
+	snd_ice1712_restore_gpio_status(ice);
+}
+
+static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch,
+					unsigned int vol1, unsigned int vol2)
+{
+	switch (ch) {
+	case 0:
+		se200pci_WM8766_write(ice, 0x000, vol1);
+		se200pci_WM8766_write(ice, 0x001, vol2 | 0x100);
+		break;
+	case 1:
+		se200pci_WM8766_write(ice, 0x004, vol1);
+		se200pci_WM8766_write(ice, 0x005, vol2 | 0x100);
+		break;
+	case 2:
+		se200pci_WM8766_write(ice, 0x006, vol1);
+		se200pci_WM8766_write(ice, 0x007, vol2 | 0x100);
+		break;
+	}
+}
+
+static void se200pci_WM8766_init(struct snd_ice1712 *ice)
+{
+	se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */
+	udelay(10);
+
+	se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */
+	se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */
+	se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */
+
+	se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */
+	se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
+	se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */
+	se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */
+	se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */
+
+	se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */
+	se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */
+}
+
+static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice,
+					unsigned int rate)
+{
+	if (rate > 96000)
+		se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */
+	else
+		se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
+}
+
+
+/****************************************************************************/
+/*  WM8776 interface                                                        */
+/****************************************************************************/
+
+static void se200pci_WM8776_write(struct snd_ice1712 *ice,
+					unsigned int addr, unsigned int data)
+{
+	unsigned int val;
+
+	val = (addr << 9) | data;
+	snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff);
+}
+
+
+static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice,
+					unsigned int vol1, unsigned int vol2)
+{
+	se200pci_WM8776_write(ice, 0x03, vol1);
+	se200pci_WM8776_write(ice, 0x04, vol2 | 0x100);
+}
+
+static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice,
+					unsigned int vol1, unsigned int vol2)
+{
+	se200pci_WM8776_write(ice, 0x0e, vol1);
+	se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100);
+}
+
+static const char * const se200pci_sel[] = {
+	"LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL
+};
+
+static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice,
+					       unsigned int sel)
+{
+	static const unsigned char vals[] = {
+		/* LINE, CD, MIC, ALL, GND */
+		0x10, 0x04, 0x08, 0x1c, 0x03
+	};
+	if (sel > 4)
+		sel = 4;
+	se200pci_WM8776_write(ice, 0x15, vals[sel]);
+}
+
+static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl)
+{
+	/* AFL -- After Fader Listening */
+	if (afl)
+		se200pci_WM8776_write(ice, 0x16, 0x005);
+	else
+		se200pci_WM8776_write(ice, 0x16, 0x001);
+}
+
+static const char * const se200pci_agc[] = {
+	"Off", "LimiterMode", "ALCMode", NULL
+};
+
+static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc)
+{
+	/* AGC -- Auto Gain Control of the input */
+	switch (agc) {
+	case 0:
+		se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */
+		break;
+	case 1:
+		se200pci_WM8776_write(ice, 0x10, 0x07b);
+		se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */
+		break;
+	case 2:
+		se200pci_WM8776_write(ice, 0x10, 0x1fb);
+		se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */
+		break;
+	}
+}
+
+static void se200pci_WM8776_init(struct snd_ice1712 *ice)
+{
+	int i;
+	static const unsigned short default_values[] = {
+		0x100, 0x100, 0x100,
+		0x100, 0x100, 0x100,
+		0x000, 0x090, 0x000, 0x000,
+		0x022, 0x022, 0x022,
+		0x008, 0x0cf, 0x0cf, 0x07b, 0x000,
+		0x032, 0x000, 0x0a6, 0x001, 0x001
+	};
+
+	se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */
+	/* ADC and DAC interface is I2S 24bits mode */
+ 	/* The sample-rate are automatically changed */
+	udelay(10);
+	/* BUT my board can not do reset all, so I load all by manually. */
+	for (i = 0; i < ARRAY_SIZE(default_values); i++)
+		se200pci_WM8776_write(ice, i, default_values[i]);
+
+	se200pci_WM8776_set_input_selector(ice, 0);
+	se200pci_WM8776_set_afl(ice, 0);
+	se200pci_WM8776_set_agc(ice, 0);
+	se200pci_WM8776_set_input_volume(ice, 0, 0);
+	se200pci_WM8776_set_output_volume(ice, 0, 0);
+
+	/* head phone mute and power down */
+	se200pci_WM8776_write(ice, 0x00, 0);
+	se200pci_WM8776_write(ice, 0x01, 0);
+	se200pci_WM8776_write(ice, 0x02, 0x100);
+	se200pci_WM8776_write(ice, 0x0d, 0x080);
+}
+
+static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice,
+						unsigned int rate)
+{
+	/* nothing to do */
+}
+
+
+/****************************************************************************/
+/*  runtime interface                                                       */
+/****************************************************************************/
+
+static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+	se200pci_WM8740_set_pro_rate(ice, rate);
+	se200pci_WM8766_set_pro_rate(ice, rate);
+	se200pci_WM8776_set_pro_rate(ice, rate);
+}
+
+struct se200pci_control {
+	const char *name;
+	enum {
+		WM8766,
+		WM8776in,
+		WM8776out,
+		WM8776sel,
+		WM8776agc,
+		WM8776afl
+	} target;
+	enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type;
+	int ch;
+	const char * const *member;
+	const char *comment;
+};
+
+static const struct se200pci_control se200pci_cont[] = {
+	{
+		.name = "Front Playback Volume",
+		.target = WM8776out,
+		.type = VOLUME1,
+		.comment = "Front(green)"
+	},
+	{
+		.name = "Side Playback Volume",
+		.target = WM8766,
+		.type = VOLUME1,
+		.ch = 1,
+		.comment = "Surround(orange)"
+	},
+	{
+		.name = "Surround Playback Volume",
+		.target = WM8766,
+		.type = VOLUME1,
+		.ch = 2,
+		.comment = "SurroundBack(white)"
+	},
+	{
+		.name = "CLFE Playback Volume",
+		.target = WM8766,
+		.type = VOLUME1,
+		.ch = 0,
+		.comment = "Center(Lch)&SubWoofer(Rch)(black)"
+	},
+	{
+		.name = "Capture Volume",
+		.target = WM8776in,
+		.type = VOLUME2
+	},
+	{
+		.name = "Capture Select",
+		.target = WM8776sel,
+		.type = ENUM,
+		.member = se200pci_sel
+	},
+	{
+		.name = "AGC Capture Mode",
+		.target = WM8776agc,
+		.type = ENUM,
+		.member = se200pci_agc
+	},
+	{
+		.name = "AFL Bypass Playback Switch",
+		.target = WM8776afl,
+		.type = BOOLEAN
+	}
+};
+
+static int se200pci_get_enum_count(int n)
+{
+	const char * const *member;
+	int c;
+
+	member = se200pci_cont[n].member;
+	if (!member)
+		return 0;
+	for (c = 0; member[c]; c++)
+		;
+	return c;
+}
+
+static int se200pci_cont_volume_info(struct snd_kcontrol *kc,
+				     struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0; /* mute */
+	uinfo->value.integer.max = 0xff; /* 0dB */
+	return 0;
+}
+
+#define se200pci_cont_boolean_info	snd_ctl_boolean_mono_info
+
+static int se200pci_cont_enum_info(struct snd_kcontrol *kc,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	int n, c;
+
+	n = kc->private_value;
+	c = se200pci_get_enum_count(n);
+	if (!c)
+		return -EINVAL;
+	return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member);
+}
+
+static int se200pci_cont_volume_get(struct snd_kcontrol *kc,
+				    struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	uc->value.integer.value[0] = spec->vol[n].ch1;
+	uc->value.integer.value[1] = spec->vol[n].ch2;
+	return 0;
+}
+
+static int se200pci_cont_boolean_get(struct snd_kcontrol *kc,
+				     struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	uc->value.integer.value[0] = spec->vol[n].ch1;
+	return 0;
+}
+
+static int se200pci_cont_enum_get(struct snd_kcontrol *kc,
+				  struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	uc->value.enumerated.item[0] = spec->vol[n].ch1;
+	return 0;
+}
+
+static void se200pci_cont_update(struct snd_ice1712 *ice, int n)
+{
+	struct se_spec *spec = ice->spec;
+	switch (se200pci_cont[n].target) {
+	case WM8766:
+		se200pci_WM8766_set_volume(ice,
+					   se200pci_cont[n].ch,
+					   spec->vol[n].ch1,
+					   spec->vol[n].ch2);
+		break;
+
+	case WM8776in:
+		se200pci_WM8776_set_input_volume(ice,
+						 spec->vol[n].ch1,
+						 spec->vol[n].ch2);
+		break;
+
+	case WM8776out:
+		se200pci_WM8776_set_output_volume(ice,
+						  spec->vol[n].ch1,
+						  spec->vol[n].ch2);
+		break;
+
+	case WM8776sel:
+		se200pci_WM8776_set_input_selector(ice,
+						   spec->vol[n].ch1);
+		break;
+
+	case WM8776agc:
+		se200pci_WM8776_set_agc(ice, spec->vol[n].ch1);
+		break;
+
+	case WM8776afl:
+		se200pci_WM8776_set_afl(ice, spec->vol[n].ch1);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int se200pci_cont_volume_put(struct snd_kcontrol *kc,
+				    struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	unsigned int vol1, vol2;
+	int changed;
+
+	changed = 0;
+	vol1 = uc->value.integer.value[0] & 0xff;
+	vol2 = uc->value.integer.value[1] & 0xff;
+	if (spec->vol[n].ch1 != vol1) {
+		spec->vol[n].ch1 = vol1;
+		changed = 1;
+	}
+	if (spec->vol[n].ch2 != vol2) {
+		spec->vol[n].ch2 = vol2;
+		changed = 1;
+	}
+	if (changed)
+		se200pci_cont_update(ice, n);
+
+	return changed;
+}
+
+static int se200pci_cont_boolean_put(struct snd_kcontrol *kc,
+				     struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	unsigned int vol1;
+
+	vol1 = !!uc->value.integer.value[0];
+	if (spec->vol[n].ch1 != vol1) {
+		spec->vol[n].ch1 = vol1;
+		se200pci_cont_update(ice, n);
+		return 1;
+	}
+	return 0;
+}
+
+static int se200pci_cont_enum_put(struct snd_kcontrol *kc,
+				  struct snd_ctl_elem_value *uc)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+	struct se_spec *spec = ice->spec;
+	int n = kc->private_value;
+	unsigned int vol1;
+
+	vol1 = uc->value.enumerated.item[0];
+	if (vol1 >= se200pci_get_enum_count(n))
+		return -EINVAL;
+	if (spec->vol[n].ch1 != vol1) {
+		spec->vol[n].ch1 = vol1;
+		se200pci_cont_update(ice, n);
+		return 1;
+	}
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);
+
+static int se200pci_add_controls(struct snd_ice1712 *ice)
+{
+	int i;
+	struct snd_kcontrol_new cont;
+	int err;
+
+	memset(&cont, 0, sizeof(cont));
+	cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) {
+		cont.private_value = i;
+		cont.name = se200pci_cont[i].name;
+		cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
+		cont.tlv.p = NULL;
+		switch (se200pci_cont[i].type) {
+		case VOLUME1:
+		case VOLUME2:
+			cont.info = se200pci_cont_volume_info;
+			cont.get = se200pci_cont_volume_get;
+			cont.put = se200pci_cont_volume_put;
+			cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+			if (se200pci_cont[i].type == VOLUME1)
+				cont.tlv.p = db_scale_gain1;
+			else
+				cont.tlv.p = db_scale_gain2;
+			break;
+		case BOOLEAN:
+			cont.info = se200pci_cont_boolean_info;
+			cont.get = se200pci_cont_boolean_get;
+			cont.put = se200pci_cont_boolean_put;
+			break;
+		case ENUM:
+			cont.info = se200pci_cont_enum_info;
+			cont.get = se200pci_cont_enum_get;
+			cont.put = se200pci_cont_enum_put;
+			break;
+		default:
+			snd_BUG();
+			return -EINVAL;
+		}
+		err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+
+/****************************************************************************/
+/*  ONKYO WAVIO SE-90PCI                                                    */
+/****************************************************************************/
+/*
+ *  system configuration ICE_EEP2_SYSCONF=0x4b
+ *  AC-Link configuration ICE_EEP2_ACLINK=0x80
+ *  I2S converters feature ICE_EEP2_I2S=0x78
+ *  S/PDIF configuration ICE_EEP2_SPDIF=0xc3
+ *
+ *  ** connected chip **
+ *
+ *   WM8716
+ *      A 2ch-DAC of main outputs.
+ *      It setuped as I2S mode by wire, so no way to setup from software.
+ *         ML/I2S (28pin) -- +5V
+ *         MC/DM1 (27pin) -- GND
+ *         MC/DM0 (26pin) -- GND
+ *         MUTEB  (25pin) -- open (internal pull-up)
+ *         MODE   (24pin) -- GND
+ *         CSBIWO (23pin) -- +5V
+ *
+ */
+
+ /* Nothing to do for this chip. */
+
+
+/****************************************************************************/
+/*  probe/initialize/setup                                                  */
+/****************************************************************************/
+
+static int se_init(struct snd_ice1712 *ice)
+{
+	struct se_spec *spec;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+	ice->spec = spec;
+
+	if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) {
+		ice->num_total_dacs = 2;
+		ice->num_total_adcs = 0;
+		ice->vt1720 = 1;
+		return 0;
+
+	} else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) {
+		ice->num_total_dacs = 8;
+		ice->num_total_adcs = 2;
+		se200pci_WM8740_init(ice);
+		se200pci_WM8766_init(ice);
+		se200pci_WM8776_init(ice);
+		ice->gpio.set_pro_rate = se200pci_set_pro_rate;
+		return 0;
+	}
+
+	return -ENOENT;
+}
+
+static int se_add_controls(struct snd_ice1712 *ice)
+{
+	int err;
+
+	err = 0;
+	/* nothing to do for VT1724_SUBDEVICE_SE90PCI */
+	if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI)
+		err = se200pci_add_controls(ice);
+
+	return err;
+}
+
+
+/****************************************************************************/
+/*  entry point                                                             */
+/****************************************************************************/
+
+static const unsigned char se200pci_eeprom[] = {
+	[ICE_EEP2_SYSCONF]	= 0x4b,	/* 49.152Hz, spdif-in/ADC, 4DACs */
+	[ICE_EEP2_ACLINK]	= 0x80,	/* I2S */
+	[ICE_EEP2_I2S]		= 0x78,	/* 96k-ok, 24bit, 192k-ok */
+	[ICE_EEP2_SPDIF]	= 0xc3,	/* out-en, out-int, spdif-in */
+
+	[ICE_EEP2_GPIO_DIR]	= 0x02, /* WM8766 mute      1=output */
+	[ICE_EEP2_GPIO_DIR1]	= 0x00, /* not used */
+	[ICE_EEP2_GPIO_DIR2]	= 0x07, /* WM8766 ML/MC/MD  1=output */
+
+	[ICE_EEP2_GPIO_MASK]	= 0x00, /* 0=writable */
+	[ICE_EEP2_GPIO_MASK1]	= 0x00, /* 0=writable */
+	[ICE_EEP2_GPIO_MASK2]	= 0x00, /* 0=writable */
+
+	[ICE_EEP2_GPIO_STATE]	= 0x00, /* WM8766 mute=0 */
+	[ICE_EEP2_GPIO_STATE1]	= 0x00, /* not used */
+	[ICE_EEP2_GPIO_STATE2]	= 0x07, /* WM8766 ML/MC/MD */
+};
+
+static const unsigned char se90pci_eeprom[] = {
+	[ICE_EEP2_SYSCONF]	= 0x4b,	/* 49.152Hz, spdif-in/ADC, 4DACs */
+	[ICE_EEP2_ACLINK]	= 0x80,	/* I2S */
+	[ICE_EEP2_I2S]		= 0x78,	/* 96k-ok, 24bit, 192k-ok */
+	[ICE_EEP2_SPDIF]	= 0xc3,	/* out-en, out-int, spdif-in */
+
+	/* ALL GPIO bits are in input mode */
+};
+
+struct snd_ice1712_card_info snd_vt1724_se_cards[] = {
+	{
+		.subvendor = VT1724_SUBDEVICE_SE200PCI,
+		.name = "ONKYO SE200PCI",
+		.model = "se200pci",
+		.chip_init = se_init,
+		.build_controls = se_add_controls,
+		.eeprom_size = sizeof(se200pci_eeprom),
+		.eeprom_data = se200pci_eeprom,
+	},
+	{
+		.subvendor = VT1724_SUBDEVICE_SE90PCI,
+		.name = "ONKYO SE90PCI",
+		.model = "se90pci",
+		.chip_init = se_init,
+		.build_controls = se_add_controls,
+		.eeprom_size = sizeof(se90pci_eeprom),
+		.eeprom_data = se90pci_eeprom,
+	},
+	{} /*terminator*/
+};