Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h
new file mode 100644
index 0000000000..b29bef90f8
--- /dev/null
+++ b/sound/soc/amd/acp.h
@@ -0,0 +1,223 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ACP_HW_H
+#define __ACP_HW_H
+
+#include "include/acp_2_2_d.h"
+#include "include/acp_2_2_sh_mask.h"
+
+#define ACP_PAGE_SIZE_4K_ENABLE			0x02
+
+#define ACP_PLAYBACK_PTE_OFFSET			10
+#define ACP_CAPTURE_PTE_OFFSET			0
+
+/* Playback and Capture Offset for Stoney */
+#define ACP_ST_PLAYBACK_PTE_OFFSET	0x04
+#define ACP_ST_CAPTURE_PTE_OFFSET	0x00
+#define ACP_ST_BT_PLAYBACK_PTE_OFFSET	0x08
+#define ACP_ST_BT_CAPTURE_PTE_OFFSET	0x0c
+
+#define ACP_GARLIC_CNTL_DEFAULT			0x00000FB4
+#define ACP_ONION_CNTL_DEFAULT			0x00000FB4
+
+#define ACP_PHYSICAL_BASE			0x14000
+
+/*
+ * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for
+ * playback and SRAM Bank 2 for capture where as in case of BT I2S
+ * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will
+ * be used for capture. Carrizo uses I2S SP controller instance. SRAM Banks
+ * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be used
+ * for capture scenario.
+ */
+#define ACP_SRAM_BANK_1_ADDRESS		0x4002000
+#define ACP_SRAM_BANK_2_ADDRESS		0x4004000
+#define ACP_SRAM_BANK_3_ADDRESS		0x4006000
+#define ACP_SRAM_BANK_4_ADDRESS		0x4008000
+#define ACP_SRAM_BANK_5_ADDRESS		0x400A000
+
+#define ACP_DMA_RESET_TIME			10000
+#define ACP_CLOCK_EN_TIME_OUT_VALUE		0x000000FF
+#define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE	0x000000FF
+#define ACP_DMA_COMPLETE_TIME_OUT_VALUE		0x000000FF
+
+#define ACP_SRAM_BASE_ADDRESS			0x4000000
+#define ACP_DAGB_GRP_SRAM_BASE_ADDRESS		0x4001000
+#define ACP_DAGB_GRP_SRBM_SRAM_BASE_OFFSET	0x1000
+#define ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS	0x00000000
+#define ACP_INTERNAL_APERTURE_WINDOW_4_ADDRESS	0x01800000
+
+#define TO_ACP_I2S_1   0x2
+#define TO_ACP_I2S_2   0x4
+#define TO_BLUETOOTH   0x3
+#define FROM_ACP_I2S_1 0xa
+#define FROM_ACP_I2S_2 0xb
+#define FROM_BLUETOOTH 0xb
+
+#define I2S_SP_INSTANCE                 0x01
+#define I2S_BT_INSTANCE                 0x02
+#define I2S_MICSP_INSTANCE		0x03
+#define CAP_CHANNEL0			0x00
+#define CAP_CHANNEL1			0x01
+
+#define ACP_TILE_ON_MASK                0x03
+#define ACP_TILE_OFF_MASK               0x02
+#define ACP_TILE_ON_RETAIN_REG_MASK     0x1f
+#define ACP_TILE_OFF_RETAIN_REG_MASK    0x20
+
+#define ACP_TILE_P1_MASK                0x3e
+#define ACP_TILE_P2_MASK                0x3d
+#define ACP_TILE_DSP0_MASK              0x3b
+#define ACP_TILE_DSP1_MASK              0x37
+
+#define ACP_TILE_DSP2_MASK              0x2f
+/* Playback DMA channels */
+#define SYSRAM_TO_ACP_CH_NUM 12
+#define ACP_TO_I2S_DMA_CH_NUM 13
+
+/* Capture DMA channels */
+#define I2S_TO_ACP_DMA_CH_NUM 14
+#define ACP_TO_SYSRAM_CH_NUM 15
+
+/* Playback DMA Channels for I2S BT instance */
+#define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM  8
+#define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9
+
+/* Capture DMA Channels for I2S BT Instance */
+#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10
+#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11
+
+/* Playback DMA channels for I2S MICSP instance */
+#define SYSRAM_TO_ACP_MICSP_INSTANCE_CH_NUM  4
+#define ACP_TO_I2S_DMA_MICSP_INSTANCE_CH_NUM 5
+
+#define NUM_DSCRS_PER_CHANNEL 2
+
+#define PLAYBACK_START_DMA_DESCR_CH12 0
+#define PLAYBACK_END_DMA_DESCR_CH12 1
+#define PLAYBACK_START_DMA_DESCR_CH13 2
+#define PLAYBACK_END_DMA_DESCR_CH13 3
+
+#define CAPTURE_START_DMA_DESCR_CH14 4
+#define CAPTURE_END_DMA_DESCR_CH14 5
+#define CAPTURE_START_DMA_DESCR_CH15 6
+#define CAPTURE_END_DMA_DESCR_CH15 7
+
+/* I2S BT Instance DMA Descriptors */
+#define PLAYBACK_START_DMA_DESCR_CH8 8
+#define PLAYBACK_END_DMA_DESCR_CH8 9
+#define PLAYBACK_START_DMA_DESCR_CH9 10
+#define PLAYBACK_END_DMA_DESCR_CH9 11
+
+#define CAPTURE_START_DMA_DESCR_CH10 12
+#define CAPTURE_END_DMA_DESCR_CH10 13
+#define CAPTURE_START_DMA_DESCR_CH11 14
+#define CAPTURE_END_DMA_DESCR_CH11 15
+
+/* I2S MICSP Instance DMA Descriptors */
+#define PLAYBACK_START_DMA_DESCR_CH4 0
+#define PLAYBACK_END_DMA_DESCR_CH4 1
+#define PLAYBACK_START_DMA_DESCR_CH5 2
+#define PLAYBACK_END_DMA_DESCR_CH5 3
+
+#define mmACP_I2S_16BIT_RESOLUTION_EN       0x5209
+#define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01
+#define ACP_I2S_MICSP_16BIT_RESOLUTION_EN 0x01
+#define ACP_I2S_SP_16BIT_RESOLUTION_EN	0x02
+#define ACP_I2S_BT_16BIT_RESOLUTION_EN	0x04
+#define ACP_BT_UART_PAD_SELECT_MASK	0x1
+
+enum acp_dma_priority_level {
+	/* 0x0 Specifies the DMA channel is given normal priority */
+	ACP_DMA_PRIORITY_LEVEL_NORMAL = 0x0,
+	/* 0x1 Specifies the DMA channel is given high priority */
+	ACP_DMA_PRIORITY_LEVEL_HIGH = 0x1,
+	ACP_DMA_PRIORITY_LEVEL_FORCESIZE = 0xFF
+};
+
+struct audio_substream_data {
+	dma_addr_t dma_addr;
+	unsigned int order;
+	u16 num_of_pages;
+	u16 i2s_instance;
+	u16 capture_channel;
+	u16 direction;
+	u16 ch1;
+	u16 ch2;
+	u16 destination;
+	u16 dma_dscr_idx_1;
+	u16 dma_dscr_idx_2;
+	u32 pte_offset;
+	u32 sram_bank;
+	u32 byte_cnt_high_reg_offset;
+	u32 byte_cnt_low_reg_offset;
+	u32 dma_curr_dscr;
+	uint64_t size;
+	u64 bytescount;
+	void __iomem *acp_mmio;
+};
+
+struct audio_drv_data {
+	struct snd_pcm_substream *play_i2ssp_stream;
+	struct snd_pcm_substream *capture_i2ssp_stream;
+	struct snd_pcm_substream *play_i2sbt_stream;
+	struct snd_pcm_substream *capture_i2sbt_stream;
+	struct snd_pcm_substream *play_i2s_micsp_stream;
+	void __iomem *acp_mmio;
+	u32 asic_type;
+	snd_pcm_sframes_t delay;
+};
+
+/*
+ * this structure used for platform data transfer between machine driver
+ * and dma driver
+ */
+struct acp_platform_info {
+	u16 play_i2s_instance;
+	u16 cap_i2s_instance;
+	u16 capture_channel;
+};
+
+union acp_dma_count {
+	struct {
+	u32 low;
+	u32 high;
+	} bcount;
+	u64 bytescount;
+};
+
+enum {
+	ACP_TILE_P1 = 0,
+	ACP_TILE_P2,
+	ACP_TILE_DSP0,
+	ACP_TILE_DSP1,
+	ACP_TILE_DSP2,
+};
+
+enum {
+	ACP_DMA_ATTR_SHAREDMEM_TO_DAGB_ONION = 0x0,
+	ACP_DMA_ATTR_SHARED_MEM_TO_DAGB_GARLIC = 0x1,
+	ACP_DMA_ATTR_DAGB_ONION_TO_SHAREDMEM = 0x8,
+	ACP_DMA_ATTR_DAGB_GARLIC_TO_SHAREDMEM = 0x9,
+	ACP_DMA_ATTR_FORCE_SIZE = 0xF
+};
+
+typedef struct acp_dma_dscr_transfer {
+	/* Specifies the source memory location for the DMA data transfer. */
+	u32 src;
+	/*
+	 * Specifies the destination memory location to where the data will
+	 * be transferred.
+	 */
+	u32 dest;
+	/*
+	 * Specifies the number of bytes need to be transferred
+	 * from source to destination memory.Transfer direction & IOC enable
+	 */
+	u32 xfer_val;
+	/* Reserved for future use */
+	u32 reserved;
+} acp_dma_dscr_transfer_t;
+
+extern bool acp_bt_uart_enable;
+
+#endif /*__ACP_HW_H */