Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1178 insertions, 0 deletions

diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
new file mode 100644
index 0000000000..34ffd32ab9
--- /dev/null
+++ b/sound/soc/codecs/sta32x.c
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Codec driver for ST STA32x 2.1-channel high-efficiency digital audio system
+ *
+ * Copyright: 2011 Raumfeld GmbH
+ * Author: Johannes Stezenbach <js@sig21.net>
+ *
+ * based on code from:
+ *	Wolfson Microelectronics PLC.
+ *	  Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *	Freescale Semiconductor, Inc.
+ *	  Timur Tabi <timur@freescale.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ":%s:%d: " fmt, __func__, __LINE__
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/sta32x.h>
+#include "sta32x.h"
+
+#define STA32X_RATES (SNDRV_PCM_RATE_32000 | \
+		      SNDRV_PCM_RATE_44100 | \
+		      SNDRV_PCM_RATE_48000 | \
+		      SNDRV_PCM_RATE_88200 | \
+		      SNDRV_PCM_RATE_96000 | \
+		      SNDRV_PCM_RATE_176400 | \
+		      SNDRV_PCM_RATE_192000)
+
+#define STA32X_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S18_3LE | \
+	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_3LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S32_LE)
+
+/* Power-up register defaults */
+static const struct reg_default sta32x_regs[] = {
+	{  0x0, 0x63 },
+	{  0x1, 0x80 },
+	{  0x2, 0xc2 },
+	{  0x3, 0x40 },
+	{  0x4, 0xc2 },
+	{  0x5, 0x5c },
+	{  0x6, 0x10 },
+	{  0x7, 0xff },
+	{  0x8, 0x60 },
+	{  0x9, 0x60 },
+	{  0xa, 0x60 },
+	{  0xb, 0x80 },
+	{  0xc, 0x00 },
+	{  0xd, 0x00 },
+	{  0xe, 0x00 },
+	{  0xf, 0x40 },
+	{ 0x10, 0x80 },
+	{ 0x11, 0x77 },
+	{ 0x12, 0x6a },
+	{ 0x13, 0x69 },
+	{ 0x14, 0x6a },
+	{ 0x15, 0x69 },
+	{ 0x16, 0x00 },
+	{ 0x17, 0x00 },
+	{ 0x18, 0x00 },
+	{ 0x19, 0x00 },
+	{ 0x1a, 0x00 },
+	{ 0x1b, 0x00 },
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x00 },
+	{ 0x1e, 0x00 },
+	{ 0x1f, 0x00 },
+	{ 0x20, 0x00 },
+	{ 0x21, 0x00 },
+	{ 0x22, 0x00 },
+	{ 0x23, 0x00 },
+	{ 0x24, 0x00 },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x00 },
+	{ 0x27, 0x2d },
+	{ 0x28, 0xc0 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x0c },
+};
+
+static const struct regmap_range sta32x_write_regs_range[] = {
+	regmap_reg_range(STA32X_CONFA,  STA32X_FDRC2),
+};
+
+static const struct regmap_range sta32x_read_regs_range[] = {
+	regmap_reg_range(STA32X_CONFA,  STA32X_FDRC2),
+};
+
+static const struct regmap_range sta32x_volatile_regs_range[] = {
+	regmap_reg_range(STA32X_CFADDR2, STA32X_CFUD),
+};
+
+static const struct regmap_access_table sta32x_write_regs = {
+	.yes_ranges =	sta32x_write_regs_range,
+	.n_yes_ranges =	ARRAY_SIZE(sta32x_write_regs_range),
+};
+
+static const struct regmap_access_table sta32x_read_regs = {
+	.yes_ranges =	sta32x_read_regs_range,
+	.n_yes_ranges =	ARRAY_SIZE(sta32x_read_regs_range),
+};
+
+static const struct regmap_access_table sta32x_volatile_regs = {
+	.yes_ranges =	sta32x_volatile_regs_range,
+	.n_yes_ranges =	ARRAY_SIZE(sta32x_volatile_regs_range),
+};
+
+/* regulator power supply names */
+static const char *sta32x_supply_names[] = {
+	"Vdda",	/* analog supply, 3.3VV */
+	"Vdd3",	/* digital supply, 3.3V */
+	"Vcc"	/* power amp spply, 10V - 36V */
+};
+
+/* codec private data */
+struct sta32x_priv {
+	struct regmap *regmap;
+	struct clk *xti_clk;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(sta32x_supply_names)];
+	struct snd_soc_component *component;
+	struct sta32x_platform_data *pdata;
+
+	unsigned int mclk;
+	unsigned int format;
+
+	u32 coef_shadow[STA32X_COEF_COUNT];
+	struct delayed_work watchdog_work;
+	int shutdown;
+	struct gpio_desc *gpiod_nreset;
+	struct mutex coeff_lock;
+};
+
+static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1);
+static const DECLARE_TLV_DB_SCALE(tone_tlv, -120, 200, 0);
+
+static const char *sta32x_drc_ac[] = {
+	"Anti-Clipping", "Dynamic Range Compression" };
+static const char *sta32x_auto_eq_mode[] = {
+	"User", "Preset", "Loudness" };
+static const char *sta32x_auto_gc_mode[] = {
+	"User", "AC no clipping", "AC limited clipping (10%)",
+	"DRC nighttime listening mode" };
+static const char *sta32x_auto_xo_mode[] = {
+	"User", "80Hz", "100Hz", "120Hz", "140Hz", "160Hz", "180Hz", "200Hz",
+	"220Hz", "240Hz", "260Hz", "280Hz", "300Hz", "320Hz", "340Hz", "360Hz" };
+static const char *sta32x_preset_eq_mode[] = {
+	"Flat", "Rock", "Soft Rock", "Jazz", "Classical", "Dance", "Pop", "Soft",
+	"Hard", "Party", "Vocal", "Hip-Hop", "Dialog", "Bass-boost #1",
+	"Bass-boost #2", "Bass-boost #3", "Loudness 1", "Loudness 2",
+	"Loudness 3", "Loudness 4", "Loudness 5", "Loudness 6", "Loudness 7",
+	"Loudness 8", "Loudness 9", "Loudness 10", "Loudness 11", "Loudness 12",
+	"Loudness 13", "Loudness 14", "Loudness 15", "Loudness 16" };
+static const char *sta32x_limiter_select[] = {
+	"Limiter Disabled", "Limiter #1", "Limiter #2" };
+static const char *sta32x_limiter_attack_rate[] = {
+	"3.1584", "2.7072", "2.2560", "1.8048", "1.3536", "0.9024",
+	"0.4512", "0.2256", "0.1504", "0.1123", "0.0902", "0.0752",
+	"0.0645", "0.0564", "0.0501", "0.0451" };
+static const char *sta32x_limiter_release_rate[] = {
+	"0.5116", "0.1370", "0.0744", "0.0499", "0.0360", "0.0299",
+	"0.0264", "0.0208", "0.0198", "0.0172", "0.0147", "0.0137",
+	"0.0134", "0.0117", "0.0110", "0.0104" };
+static DECLARE_TLV_DB_RANGE(sta32x_limiter_ac_attack_tlv,
+	0, 7, TLV_DB_SCALE_ITEM(-1200, 200, 0),
+	8, 16, TLV_DB_SCALE_ITEM(300, 100, 0),
+);
+
+static DECLARE_TLV_DB_RANGE(sta32x_limiter_ac_release_tlv,
+	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0),
+	1, 1, TLV_DB_SCALE_ITEM(-2900, 0, 0),
+	2, 2, TLV_DB_SCALE_ITEM(-2000, 0, 0),
+	3, 8, TLV_DB_SCALE_ITEM(-1400, 200, 0),
+	8, 16, TLV_DB_SCALE_ITEM(-700, 100, 0),
+);
+
+static DECLARE_TLV_DB_RANGE(sta32x_limiter_drc_attack_tlv,
+	0, 7, TLV_DB_SCALE_ITEM(-3100, 200, 0),
+	8, 13, TLV_DB_SCALE_ITEM(-1600, 100, 0),
+	14, 16, TLV_DB_SCALE_ITEM(-1000, 300, 0),
+);
+
+static DECLARE_TLV_DB_RANGE(sta32x_limiter_drc_release_tlv,
+	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0),
+	1, 2, TLV_DB_SCALE_ITEM(-3800, 200, 0),
+	3, 4, TLV_DB_SCALE_ITEM(-3300, 200, 0),
+	5, 12, TLV_DB_SCALE_ITEM(-3000, 200, 0),
+	13, 16, TLV_DB_SCALE_ITEM(-1500, 300, 0),
+);
+
+static SOC_ENUM_SINGLE_DECL(sta32x_drc_ac_enum,
+			    STA32X_CONFD, STA32X_CONFD_DRC_SHIFT,
+			    sta32x_drc_ac);
+static SOC_ENUM_SINGLE_DECL(sta32x_auto_eq_enum,
+			    STA32X_AUTO1, STA32X_AUTO1_AMEQ_SHIFT,
+			    sta32x_auto_eq_mode);
+static SOC_ENUM_SINGLE_DECL(sta32x_auto_gc_enum,
+			    STA32X_AUTO1, STA32X_AUTO1_AMGC_SHIFT,
+			    sta32x_auto_gc_mode);
+static SOC_ENUM_SINGLE_DECL(sta32x_auto_xo_enum,
+			    STA32X_AUTO2, STA32X_AUTO2_XO_SHIFT,
+			    sta32x_auto_xo_mode);
+static SOC_ENUM_SINGLE_DECL(sta32x_preset_eq_enum,
+			    STA32X_AUTO3, STA32X_AUTO3_PEQ_SHIFT,
+			    sta32x_preset_eq_mode);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter_ch1_enum,
+			    STA32X_C1CFG, STA32X_CxCFG_LS_SHIFT,
+			    sta32x_limiter_select);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter_ch2_enum,
+			    STA32X_C2CFG, STA32X_CxCFG_LS_SHIFT,
+			    sta32x_limiter_select);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter_ch3_enum,
+			    STA32X_C3CFG, STA32X_CxCFG_LS_SHIFT,
+			    sta32x_limiter_select);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter1_attack_rate_enum,
+			    STA32X_L1AR, STA32X_LxA_SHIFT,
+			    sta32x_limiter_attack_rate);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_attack_rate_enum,
+			    STA32X_L2AR, STA32X_LxA_SHIFT,
+			    sta32x_limiter_attack_rate);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter1_release_rate_enum,
+			    STA32X_L1AR, STA32X_LxR_SHIFT,
+			    sta32x_limiter_release_rate);
+static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
+			    STA32X_L2AR, STA32X_LxR_SHIFT,
+			    sta32x_limiter_release_rate);
+
+/* byte array controls for setting biquad, mixer, scaling coefficients;
+ * for biquads all five coefficients need to be set in one go,
+ * mixer and pre/postscale coefs can be set individually;
+ * each coef is 24bit, the bytes are ordered in the same way
+ * as given in the STA32x data sheet (big endian; b1, b2, a1, a2, b0)
+ */
+
+static int sta32x_coefficient_info(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_info *uinfo)
+{
+	int numcoef = kcontrol->private_value >> 16;
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = 3 * numcoef;
+	return 0;
+}
+
+static int sta32x_coefficient_get(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	int numcoef = kcontrol->private_value >> 16;
+	int index = kcontrol->private_value & 0xffff;
+	unsigned int cfud, val;
+	int i, ret = 0;
+
+	mutex_lock(&sta32x->coeff_lock);
+
+	/* preserve reserved bits in STA32X_CFUD */
+	regmap_read(sta32x->regmap, STA32X_CFUD, &cfud);
+	cfud &= 0xf0;
+	/*
+	 * chip documentation does not say if the bits are self clearing,
+	 * so do it explicitly
+	 */
+	regmap_write(sta32x->regmap, STA32X_CFUD, cfud);
+
+	regmap_write(sta32x->regmap, STA32X_CFADDR2, index);
+	if (numcoef == 1) {
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud | 0x04);
+	} else if (numcoef == 5) {
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud | 0x08);
+	} else {
+		ret = -EINVAL;
+		goto exit_unlock;
+	}
+
+	for (i = 0; i < 3 * numcoef; i++) {
+		regmap_read(sta32x->regmap, STA32X_B1CF1 + i, &val);
+		ucontrol->value.bytes.data[i] = val;
+	}
+
+exit_unlock:
+	mutex_unlock(&sta32x->coeff_lock);
+
+	return ret;
+}
+
+static int sta32x_coefficient_put(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	int numcoef = kcontrol->private_value >> 16;
+	int index = kcontrol->private_value & 0xffff;
+	unsigned int cfud;
+	int i;
+
+	/* preserve reserved bits in STA32X_CFUD */
+	regmap_read(sta32x->regmap, STA32X_CFUD, &cfud);
+	cfud &= 0xf0;
+	/*
+	 * chip documentation does not say if the bits are self clearing,
+	 * so do it explicitly
+	 */
+	regmap_write(sta32x->regmap, STA32X_CFUD, cfud);
+
+	regmap_write(sta32x->regmap, STA32X_CFADDR2, index);
+	for (i = 0; i < numcoef && (index + i < STA32X_COEF_COUNT); i++)
+		sta32x->coef_shadow[index + i] =
+			  (ucontrol->value.bytes.data[3 * i] << 16)
+			| (ucontrol->value.bytes.data[3 * i + 1] << 8)
+			| (ucontrol->value.bytes.data[3 * i + 2]);
+	for (i = 0; i < 3 * numcoef; i++)
+		regmap_write(sta32x->regmap, STA32X_B1CF1 + i,
+			     ucontrol->value.bytes.data[i]);
+	if (numcoef == 1)
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud | 0x01);
+	else if (numcoef == 5)
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud | 0x02);
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sta32x_sync_coef_shadow(struct snd_soc_component *component)
+{
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	unsigned int cfud;
+	int i;
+
+	/* preserve reserved bits in STA32X_CFUD */
+	regmap_read(sta32x->regmap, STA32X_CFUD, &cfud);
+	cfud &= 0xf0;
+
+	for (i = 0; i < STA32X_COEF_COUNT; i++) {
+		regmap_write(sta32x->regmap, STA32X_CFADDR2, i);
+		regmap_write(sta32x->regmap, STA32X_B1CF1,
+			     (sta32x->coef_shadow[i] >> 16) & 0xff);
+		regmap_write(sta32x->regmap, STA32X_B1CF2,
+			     (sta32x->coef_shadow[i] >> 8) & 0xff);
+		regmap_write(sta32x->regmap, STA32X_B1CF3,
+			     (sta32x->coef_shadow[i]) & 0xff);
+		/*
+		 * chip documentation does not say if the bits are
+		 * self-clearing, so do it explicitly
+		 */
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud);
+		regmap_write(sta32x->regmap, STA32X_CFUD, cfud | 0x01);
+	}
+	return 0;
+}
+
+static int sta32x_cache_sync(struct snd_soc_component *component)
+{
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	unsigned int mute;
+	int rc;
+
+	/* mute during register sync */
+	regmap_read(sta32x->regmap, STA32X_MMUTE, &mute);
+	regmap_write(sta32x->regmap, STA32X_MMUTE, mute | STA32X_MMUTE_MMUTE);
+	sta32x_sync_coef_shadow(component);
+	rc = regcache_sync(sta32x->regmap);
+	regmap_write(sta32x->regmap, STA32X_MMUTE, mute);
+	return rc;
+}
+
+/* work around ESD issue where sta32x resets and loses all configuration */
+static void sta32x_watchdog(struct work_struct *work)
+{
+	struct sta32x_priv *sta32x = container_of(work, struct sta32x_priv,
+						  watchdog_work.work);
+	struct snd_soc_component *component = sta32x->component;
+	unsigned int confa, confa_cached;
+
+	/* check if sta32x has reset itself */
+	confa_cached = snd_soc_component_read(component, STA32X_CONFA);
+	regcache_cache_bypass(sta32x->regmap, true);
+	confa = snd_soc_component_read(component, STA32X_CONFA);
+	regcache_cache_bypass(sta32x->regmap, false);
+	if (confa != confa_cached) {
+		regcache_mark_dirty(sta32x->regmap);
+		sta32x_cache_sync(component);
+	}
+
+	if (!sta32x->shutdown)
+		queue_delayed_work(system_power_efficient_wq,
+				   &sta32x->watchdog_work,
+				   round_jiffies_relative(HZ));
+}
+
+static void sta32x_watchdog_start(struct sta32x_priv *sta32x)
+{
+	if (sta32x->pdata->needs_esd_watchdog) {
+		sta32x->shutdown = 0;
+		queue_delayed_work(system_power_efficient_wq,
+				   &sta32x->watchdog_work,
+				   round_jiffies_relative(HZ));
+	}
+}
+
+static void sta32x_watchdog_stop(struct sta32x_priv *sta32x)
+{
+	if (sta32x->pdata->needs_esd_watchdog) {
+		sta32x->shutdown = 1;
+		cancel_delayed_work_sync(&sta32x->watchdog_work);
+	}
+}
+
+#define SINGLE_COEF(xname, index) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = sta32x_coefficient_info, \
+	.get = sta32x_coefficient_get,\
+	.put = sta32x_coefficient_put, \
+	.private_value = index | (1 << 16) }
+
+#define BIQUAD_COEFS(xname, index) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = sta32x_coefficient_info, \
+	.get = sta32x_coefficient_get,\
+	.put = sta32x_coefficient_put, \
+	.private_value = index | (5 << 16) }
+
+static const struct snd_kcontrol_new sta32x_snd_controls[] = {
+SOC_SINGLE_TLV("Master Volume", STA32X_MVOL, 0, 0xff, 1, mvol_tlv),
+SOC_SINGLE("Master Switch", STA32X_MMUTE, 0, 1, 1),
+SOC_SINGLE("Ch1 Switch", STA32X_MMUTE, 1, 1, 1),
+SOC_SINGLE("Ch2 Switch", STA32X_MMUTE, 2, 1, 1),
+SOC_SINGLE("Ch3 Switch", STA32X_MMUTE, 3, 1, 1),
+SOC_SINGLE_TLV("Ch1 Volume", STA32X_C1VOL, 0, 0xff, 1, chvol_tlv),
+SOC_SINGLE_TLV("Ch2 Volume", STA32X_C2VOL, 0, 0xff, 1, chvol_tlv),
+SOC_SINGLE_TLV("Ch3 Volume", STA32X_C3VOL, 0, 0xff, 1, chvol_tlv),
+SOC_SINGLE("De-emphasis Filter Switch", STA32X_CONFD, STA32X_CONFD_DEMP_SHIFT, 1, 0),
+SOC_ENUM("Compressor/Limiter Switch", sta32x_drc_ac_enum),
+SOC_SINGLE("Miami Mode Switch", STA32X_CONFD, STA32X_CONFD_MME_SHIFT, 1, 0),
+SOC_SINGLE("Zero Cross Switch", STA32X_CONFE, STA32X_CONFE_ZCE_SHIFT, 1, 0),
+SOC_SINGLE("Soft Ramp Switch", STA32X_CONFE, STA32X_CONFE_SVE_SHIFT, 1, 0),
+SOC_SINGLE("Auto-Mute Switch", STA32X_CONFF, STA32X_CONFF_IDE_SHIFT, 1, 0),
+SOC_ENUM("Automode EQ", sta32x_auto_eq_enum),
+SOC_ENUM("Automode GC", sta32x_auto_gc_enum),
+SOC_ENUM("Automode XO", sta32x_auto_xo_enum),
+SOC_ENUM("Preset EQ", sta32x_preset_eq_enum),
+SOC_SINGLE("Ch1 Tone Control Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_TCB_SHIFT, 1, 0),
+SOC_SINGLE("Ch2 Tone Control Bypass Switch", STA32X_C2CFG, STA32X_CxCFG_TCB_SHIFT, 1, 0),
+SOC_SINGLE("Ch1 EQ Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_EQBP_SHIFT, 1, 0),
+SOC_SINGLE("Ch2 EQ Bypass Switch", STA32X_C2CFG, STA32X_CxCFG_EQBP_SHIFT, 1, 0),
+SOC_SINGLE("Ch1 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0),
+SOC_SINGLE("Ch2 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0),
+SOC_SINGLE("Ch3 Master Volume Bypass Switch", STA32X_C1CFG, STA32X_CxCFG_VBP_SHIFT, 1, 0),
+SOC_ENUM("Ch1 Limiter Select", sta32x_limiter_ch1_enum),
+SOC_ENUM("Ch2 Limiter Select", sta32x_limiter_ch2_enum),
+SOC_ENUM("Ch3 Limiter Select", sta32x_limiter_ch3_enum),
+SOC_SINGLE_TLV("Bass Tone Control", STA32X_TONE, STA32X_TONE_BTC_SHIFT, 15, 0, tone_tlv),
+SOC_SINGLE_TLV("Treble Tone Control", STA32X_TONE, STA32X_TONE_TTC_SHIFT, 15, 0, tone_tlv),
+SOC_ENUM("Limiter1 Attack Rate (dB/ms)", sta32x_limiter1_attack_rate_enum),
+SOC_ENUM("Limiter2 Attack Rate (dB/ms)", sta32x_limiter2_attack_rate_enum),
+SOC_ENUM("Limiter1 Release Rate (dB/ms)", sta32x_limiter1_release_rate_enum),
+SOC_ENUM("Limiter2 Release Rate (dB/ms)", sta32x_limiter2_release_rate_enum),
+
+/* depending on mode, the attack/release thresholds have
+ * two different enum definitions; provide both
+ */
+SOC_SINGLE_TLV("Limiter1 Attack Threshold (AC Mode)", STA32X_L1ATRT, STA32X_LxA_SHIFT,
+	       16, 0, sta32x_limiter_ac_attack_tlv),
+SOC_SINGLE_TLV("Limiter2 Attack Threshold (AC Mode)", STA32X_L2ATRT, STA32X_LxA_SHIFT,
+	       16, 0, sta32x_limiter_ac_attack_tlv),
+SOC_SINGLE_TLV("Limiter1 Release Threshold (AC Mode)", STA32X_L1ATRT, STA32X_LxR_SHIFT,
+	       16, 0, sta32x_limiter_ac_release_tlv),
+SOC_SINGLE_TLV("Limiter2 Release Threshold (AC Mode)", STA32X_L2ATRT, STA32X_LxR_SHIFT,
+	       16, 0, sta32x_limiter_ac_release_tlv),
+SOC_SINGLE_TLV("Limiter1 Attack Threshold (DRC Mode)", STA32X_L1ATRT, STA32X_LxA_SHIFT,
+	       16, 0, sta32x_limiter_drc_attack_tlv),
+SOC_SINGLE_TLV("Limiter2 Attack Threshold (DRC Mode)", STA32X_L2ATRT, STA32X_LxA_SHIFT,
+	       16, 0, sta32x_limiter_drc_attack_tlv),
+SOC_SINGLE_TLV("Limiter1 Release Threshold (DRC Mode)", STA32X_L1ATRT, STA32X_LxR_SHIFT,
+	       16, 0, sta32x_limiter_drc_release_tlv),
+SOC_SINGLE_TLV("Limiter2 Release Threshold (DRC Mode)", STA32X_L2ATRT, STA32X_LxR_SHIFT,
+	       16, 0, sta32x_limiter_drc_release_tlv),
+
+BIQUAD_COEFS("Ch1 - Biquad 1", 0),
+BIQUAD_COEFS("Ch1 - Biquad 2", 5),
+BIQUAD_COEFS("Ch1 - Biquad 3", 10),
+BIQUAD_COEFS("Ch1 - Biquad 4", 15),
+BIQUAD_COEFS("Ch2 - Biquad 1", 20),
+BIQUAD_COEFS("Ch2 - Biquad 2", 25),
+BIQUAD_COEFS("Ch2 - Biquad 3", 30),
+BIQUAD_COEFS("Ch2 - Biquad 4", 35),
+BIQUAD_COEFS("High-pass", 40),
+BIQUAD_COEFS("Low-pass", 45),
+SINGLE_COEF("Ch1 - Prescale", 50),
+SINGLE_COEF("Ch2 - Prescale", 51),
+SINGLE_COEF("Ch1 - Postscale", 52),
+SINGLE_COEF("Ch2 - Postscale", 53),
+SINGLE_COEF("Ch3 - Postscale", 54),
+SINGLE_COEF("Thermal warning - Postscale", 55),
+SINGLE_COEF("Ch1 - Mix 1", 56),
+SINGLE_COEF("Ch1 - Mix 2", 57),
+SINGLE_COEF("Ch2 - Mix 1", 58),
+SINGLE_COEF("Ch2 - Mix 2", 59),
+SINGLE_COEF("Ch3 - Mix 1", 60),
+SINGLE_COEF("Ch3 - Mix 2", 61),
+};
+
+static const struct snd_soc_dapm_widget sta32x_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_OUTPUT("LEFT"),
+SND_SOC_DAPM_OUTPUT("RIGHT"),
+SND_SOC_DAPM_OUTPUT("SUB"),
+};
+
+static const struct snd_soc_dapm_route sta32x_dapm_routes[] = {
+	{ "LEFT", NULL, "DAC" },
+	{ "RIGHT", NULL, "DAC" },
+	{ "SUB", NULL, "DAC" },
+};
+
+/* MCLK interpolation ratio per fs */
+static struct {
+	int fs;
+	int ir;
+} interpolation_ratios[] = {
+	{ 32000, 0 },
+	{ 44100, 0 },
+	{ 48000, 0 },
+	{ 88200, 1 },
+	{ 96000, 1 },
+	{ 176400, 2 },
+	{ 192000, 2 },
+};
+
+/* MCLK to fs clock ratios */
+static int mcs_ratio_table[3][7] = {
+	{ 768, 512, 384, 256, 128, 576, 0 },
+	{ 384, 256, 192, 128,  64,   0 },
+	{ 384, 256, 192, 128,  64,   0 },
+};
+
+/**
+ * sta32x_set_dai_sysclk - configure MCLK
+ * @codec_dai: the codec DAI
+ * @clk_id: the clock ID (ignored)
+ * @freq: the MCLK input frequency
+ * @dir: the clock direction (ignored)
+ *
+ * The value of MCLK is used to determine which sample rates are supported
+ * by the STA32X, based on the mclk_ratios table.
+ *
+ * This function must be called by the machine driver's 'startup' function,
+ * otherwise the list of supported sample rates will not be available in
+ * time for ALSA.
+ *
+ * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
+ * theoretically possible sample rates to be enabled. Call it again with a
+ * proper value set one the external clock is set (most probably you would do
+ * that from a machine's driver 'hw_param' hook.
+ */
+static int sta32x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+
+	dev_dbg(component->dev, "mclk=%u\n", freq);
+	sta32x->mclk = freq;
+
+	return 0;
+}
+
+/**
+ * sta32x_set_dai_fmt - configure the codec for the selected audio format
+ * @codec_dai: the codec DAI
+ * @fmt: a SND_SOC_DAIFMT_x value indicating the data format
+ *
+ * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
+ * codec accordingly.
+ */
+static int sta32x_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_component *component = codec_dai->component;
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	u8 confb = 0;
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
+	case SND_SOC_DAIFMT_CBC_CFC:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		sta32x->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		confb |= STA32X_CONFB_C2IM;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		confb |= STA32X_CONFB_C1IM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(sta32x->regmap, STA32X_CONFB,
+				  STA32X_CONFB_C1IM | STA32X_CONFB_C2IM, confb);
+}
+
+/**
+ * sta32x_hw_params - program the STA32X with the given hardware parameters.
+ * @substream: the audio stream
+ * @params: the hardware parameters to set
+ * @dai: the SOC DAI (ignored)
+ *
+ * This function programs the hardware with the values provided.
+ * Specifically, the sample rate and the data format.
+ */
+static int sta32x_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_component *component = dai->component;
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	int i, mcs = -EINVAL, ir = -EINVAL;
+	unsigned int confa, confb;
+	unsigned int rate, ratio;
+	int ret;
+
+	if (!sta32x->mclk) {
+		dev_err(component->dev,
+			"sta32x->mclk is unset. Unable to determine ratio\n");
+		return -EIO;
+	}
+
+	rate = params_rate(params);
+	ratio = sta32x->mclk / rate;
+	dev_dbg(component->dev, "rate: %u, ratio: %u\n", rate, ratio);
+
+	for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++) {
+		if (interpolation_ratios[i].fs == rate) {
+			ir = interpolation_ratios[i].ir;
+			break;
+		}
+	}
+
+	if (ir < 0) {
+		dev_err(component->dev, "Unsupported samplerate: %u\n", rate);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < 6; i++) {
+		if (mcs_ratio_table[ir][i] == ratio) {
+			mcs = i;
+			break;
+		}
+	}
+
+	if (mcs < 0) {
+		dev_err(component->dev, "Unresolvable ratio: %u\n", ratio);
+		return -EINVAL;
+	}
+
+	confa = (ir << STA32X_CONFA_IR_SHIFT) |
+		(mcs << STA32X_CONFA_MCS_SHIFT);
+	confb = 0;
+
+	switch (params_width(params)) {
+	case 24:
+		dev_dbg(component->dev, "24bit\n");
+		fallthrough;
+	case 32:
+		dev_dbg(component->dev, "24bit or 32bit\n");
+		switch (sta32x->format) {
+		case SND_SOC_DAIFMT_I2S:
+			confb |= 0x0;
+			break;
+		case SND_SOC_DAIFMT_LEFT_J:
+			confb |= 0x1;
+			break;
+		case SND_SOC_DAIFMT_RIGHT_J:
+			confb |= 0x2;
+			break;
+		}
+
+		break;
+	case 20:
+		dev_dbg(component->dev, "20bit\n");
+		switch (sta32x->format) {
+		case SND_SOC_DAIFMT_I2S:
+			confb |= 0x4;
+			break;
+		case SND_SOC_DAIFMT_LEFT_J:
+			confb |= 0x5;
+			break;
+		case SND_SOC_DAIFMT_RIGHT_J:
+			confb |= 0x6;
+			break;
+		}
+
+		break;
+	case 18:
+		dev_dbg(component->dev, "18bit\n");
+		switch (sta32x->format) {
+		case SND_SOC_DAIFMT_I2S:
+			confb |= 0x8;
+			break;
+		case SND_SOC_DAIFMT_LEFT_J:
+			confb |= 0x9;
+			break;
+		case SND_SOC_DAIFMT_RIGHT_J:
+			confb |= 0xa;
+			break;
+		}
+
+		break;
+	case 16:
+		dev_dbg(component->dev, "16bit\n");
+		switch (sta32x->format) {
+		case SND_SOC_DAIFMT_I2S:
+			confb |= 0x0;
+			break;
+		case SND_SOC_DAIFMT_LEFT_J:
+			confb |= 0xd;
+			break;
+		case SND_SOC_DAIFMT_RIGHT_J:
+			confb |= 0xe;
+			break;
+		}
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(sta32x->regmap, STA32X_CONFA,
+				 STA32X_CONFA_MCS_MASK | STA32X_CONFA_IR_MASK,
+				 confa);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(sta32x->regmap, STA32X_CONFB,
+				 STA32X_CONFB_SAI_MASK | STA32X_CONFB_SAIFB,
+				 confb);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int sta32x_startup_sequence(struct sta32x_priv *sta32x)
+{
+	if (sta32x->gpiod_nreset) {
+		gpiod_set_value(sta32x->gpiod_nreset, 0);
+		mdelay(1);
+		gpiod_set_value(sta32x->gpiod_nreset, 1);
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+/**
+ * sta32x_set_bias_level - DAPM callback
+ * @component: the component device
+ * @level: DAPM power level
+ *
+ * This is called by ALSA to put the component into low power mode
+ * or to wake it up.  If the component is powered off completely
+ * all registers must be restored after power on.
+ */
+static int sta32x_set_bias_level(struct snd_soc_component *component,
+				 enum snd_soc_bias_level level)
+{
+	int ret;
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+
+	dev_dbg(component->dev, "level = %d\n", level);
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		/* Full power on */
+		regmap_update_bits(sta32x->regmap, STA32X_CONFF,
+				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD,
+				    STA32X_CONFF_PWDN | STA32X_CONFF_EAPD);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+			ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies),
+						    sta32x->supplies);
+			if (ret != 0) {
+				dev_err(component->dev,
+					"Failed to enable supplies: %d\n", ret);
+				return ret;
+			}
+
+			sta32x_startup_sequence(sta32x);
+			sta32x_cache_sync(component);
+			sta32x_watchdog_start(sta32x);
+		}
+
+		/* Power down */
+		regmap_update_bits(sta32x->regmap, STA32X_CONFF,
+				   STA32X_CONFF_PWDN | STA32X_CONFF_EAPD,
+				   0);
+
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* The chip runs through the power down sequence for us. */
+		regmap_update_bits(sta32x->regmap, STA32X_CONFF,
+				   STA32X_CONFF_PWDN | STA32X_CONFF_EAPD, 0);
+		msleep(300);
+		sta32x_watchdog_stop(sta32x);
+
+		gpiod_set_value(sta32x->gpiod_nreset, 0);
+
+		regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies),
+				       sta32x->supplies);
+		break;
+	}
+	return 0;
+}
+
+static const struct snd_soc_dai_ops sta32x_dai_ops = {
+	.hw_params	= sta32x_hw_params,
+	.set_sysclk	= sta32x_set_dai_sysclk,
+	.set_fmt	= sta32x_set_dai_fmt,
+};
+
+static struct snd_soc_dai_driver sta32x_dai = {
+	.name = "sta32x-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = STA32X_RATES,
+		.formats = STA32X_FORMATS,
+	},
+	.ops = &sta32x_dai_ops,
+};
+
+static int sta32x_probe(struct snd_soc_component *component)
+{
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+	struct sta32x_platform_data *pdata = sta32x->pdata;
+	int i, ret = 0, thermal = 0;
+
+	sta32x->component = component;
+
+	if (sta32x->xti_clk) {
+		ret = clk_prepare_enable(sta32x->xti_clk);
+		if (ret != 0) {
+			dev_err(component->dev,
+				"Failed to enable clock: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies),
+				    sta32x->supplies);
+	if (ret != 0) {
+		dev_err(component->dev, "Failed to enable supplies: %d\n", ret);
+		goto err_clk_disable_unprepare;
+	}
+
+	ret = sta32x_startup_sequence(sta32x);
+	if (ret < 0) {
+		dev_err(component->dev, "Failed to startup device\n");
+		goto err_regulator_bulk_disable;
+	}
+
+	/* CONFA */
+	if (!pdata->thermal_warning_recovery)
+		thermal |= STA32X_CONFA_TWAB;
+	if (!pdata->thermal_warning_adjustment)
+		thermal |= STA32X_CONFA_TWRB;
+	if (!pdata->fault_detect_recovery)
+		thermal |= STA32X_CONFA_FDRB;
+	regmap_update_bits(sta32x->regmap, STA32X_CONFA,
+			   STA32X_CONFA_TWAB | STA32X_CONFA_TWRB |
+			   STA32X_CONFA_FDRB,
+			   thermal);
+
+	/* CONFC */
+	regmap_update_bits(sta32x->regmap, STA32X_CONFC,
+			   STA32X_CONFC_CSZ_MASK,
+			   pdata->drop_compensation_ns
+				<< STA32X_CONFC_CSZ_SHIFT);
+
+	/* CONFE */
+	regmap_update_bits(sta32x->regmap, STA32X_CONFE,
+			   STA32X_CONFE_MPCV,
+			   pdata->max_power_use_mpcc ?
+				STA32X_CONFE_MPCV : 0);
+	regmap_update_bits(sta32x->regmap, STA32X_CONFE,
+			   STA32X_CONFE_MPC,
+			   pdata->max_power_correction ?
+				STA32X_CONFE_MPC : 0);
+	regmap_update_bits(sta32x->regmap, STA32X_CONFE,
+			   STA32X_CONFE_AME,
+			   pdata->am_reduction_mode ?
+				STA32X_CONFE_AME : 0);
+	regmap_update_bits(sta32x->regmap, STA32X_CONFE,
+			   STA32X_CONFE_PWMS,
+			   pdata->odd_pwm_speed_mode ?
+				STA32X_CONFE_PWMS : 0);
+
+	/*  CONFF */
+	regmap_update_bits(sta32x->regmap, STA32X_CONFF,
+			   STA32X_CONFF_IDE,
+			   pdata->invalid_input_detect_mute ?
+				STA32X_CONFF_IDE : 0);
+
+	/* select output configuration  */
+	regmap_update_bits(sta32x->regmap, STA32X_CONFF,
+			   STA32X_CONFF_OCFG_MASK,
+			   pdata->output_conf
+				<< STA32X_CONFF_OCFG_SHIFT);
+
+	/* channel to output mapping */
+	regmap_update_bits(sta32x->regmap, STA32X_C1CFG,
+			   STA32X_CxCFG_OM_MASK,
+			   pdata->ch1_output_mapping
+				<< STA32X_CxCFG_OM_SHIFT);
+	regmap_update_bits(sta32x->regmap, STA32X_C2CFG,
+			   STA32X_CxCFG_OM_MASK,
+			   pdata->ch2_output_mapping
+				<< STA32X_CxCFG_OM_SHIFT);
+	regmap_update_bits(sta32x->regmap, STA32X_C3CFG,
+			   STA32X_CxCFG_OM_MASK,
+			   pdata->ch3_output_mapping
+				<< STA32X_CxCFG_OM_SHIFT);
+
+	/* initialize coefficient shadow RAM with reset values */
+	for (i = 4; i <= 49; i += 5)
+		sta32x->coef_shadow[i] = 0x400000;
+	for (i = 50; i <= 54; i++)
+		sta32x->coef_shadow[i] = 0x7fffff;
+	sta32x->coef_shadow[55] = 0x5a9df7;
+	sta32x->coef_shadow[56] = 0x7fffff;
+	sta32x->coef_shadow[59] = 0x7fffff;
+	sta32x->coef_shadow[60] = 0x400000;
+	sta32x->coef_shadow[61] = 0x400000;
+
+	if (sta32x->pdata->needs_esd_watchdog)
+		INIT_DELAYED_WORK(&sta32x->watchdog_work, sta32x_watchdog);
+
+	snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
+	/* Bias level configuration will have done an extra enable */
+	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
+
+	return 0;
+
+err_regulator_bulk_disable:
+	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
+err_clk_disable_unprepare:
+	if (sta32x->xti_clk)
+		clk_disable_unprepare(sta32x->xti_clk);
+	return ret;
+}
+
+static void sta32x_remove(struct snd_soc_component *component)
+{
+	struct sta32x_priv *sta32x = snd_soc_component_get_drvdata(component);
+
+	sta32x_watchdog_stop(sta32x);
+	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
+
+	if (sta32x->xti_clk)
+		clk_disable_unprepare(sta32x->xti_clk);
+}
+
+static const struct snd_soc_component_driver sta32x_component = {
+	.probe			= sta32x_probe,
+	.remove			= sta32x_remove,
+	.set_bias_level		= sta32x_set_bias_level,
+	.controls		= sta32x_snd_controls,
+	.num_controls		= ARRAY_SIZE(sta32x_snd_controls),
+	.dapm_widgets		= sta32x_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(sta32x_dapm_widgets),
+	.dapm_routes		= sta32x_dapm_routes,
+	.num_dapm_routes	= ARRAY_SIZE(sta32x_dapm_routes),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static const struct regmap_config sta32x_regmap = {
+	.reg_bits =		8,
+	.val_bits =		8,
+	.max_register =		STA32X_FDRC2,
+	.reg_defaults =		sta32x_regs,
+	.num_reg_defaults =	ARRAY_SIZE(sta32x_regs),
+	.cache_type =		REGCACHE_MAPLE,
+	.wr_table =		&sta32x_write_regs,
+	.rd_table =		&sta32x_read_regs,
+	.volatile_table =	&sta32x_volatile_regs,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id st32x_dt_ids[] = {
+	{ .compatible = "st,sta32x", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st32x_dt_ids);
+
+static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x)
+{
+	struct device_node *np = dev->of_node;
+	struct sta32x_platform_data *pdata;
+	u16 tmp;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	of_property_read_u8(np, "st,output-conf",
+			    &pdata->output_conf);
+	of_property_read_u8(np, "st,ch1-output-mapping",
+			    &pdata->ch1_output_mapping);
+	of_property_read_u8(np, "st,ch2-output-mapping",
+			    &pdata->ch2_output_mapping);
+	of_property_read_u8(np, "st,ch3-output-mapping",
+			    &pdata->ch3_output_mapping);
+
+	pdata->fault_detect_recovery =
+		of_property_read_bool(np, "st,fault-detect-recovery");
+	pdata->thermal_warning_recovery =
+		of_property_read_bool(np, "st,thermal-warning-recovery");
+	pdata->thermal_warning_adjustment =
+		of_property_read_bool(np, "st,thermal-warning-adjustment");
+	pdata->needs_esd_watchdog =
+		of_property_read_bool(np, "st,needs_esd_watchdog");
+
+	tmp = 140;
+	of_property_read_u16(np, "st,drop-compensation-ns", &tmp);
+	pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20;
+
+	/* CONFE */
+	pdata->max_power_use_mpcc =
+		of_property_read_bool(np, "st,max-power-use-mpcc");
+	pdata->max_power_correction =
+		of_property_read_bool(np, "st,max-power-correction");
+	pdata->am_reduction_mode =
+		of_property_read_bool(np, "st,am-reduction-mode");
+	pdata->odd_pwm_speed_mode =
+		of_property_read_bool(np, "st,odd-pwm-speed-mode");
+
+	/* CONFF */
+	pdata->invalid_input_detect_mute =
+		of_property_read_bool(np, "st,invalid-input-detect-mute");
+
+	sta32x->pdata = pdata;
+
+	return 0;
+}
+#endif
+
+static int sta32x_i2c_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct sta32x_priv *sta32x;
+	int ret, i;
+
+	sta32x = devm_kzalloc(&i2c->dev, sizeof(struct sta32x_priv),
+			      GFP_KERNEL);
+	if (!sta32x)
+		return -ENOMEM;
+
+	mutex_init(&sta32x->coeff_lock);
+	sta32x->pdata = dev_get_platdata(dev);
+
+#ifdef CONFIG_OF
+	if (dev->of_node) {
+		ret = sta32x_probe_dt(dev, sta32x);
+		if (ret < 0)
+			return ret;
+	}
+#endif
+
+	/* Clock */
+	sta32x->xti_clk = devm_clk_get(dev, "xti");
+	if (IS_ERR(sta32x->xti_clk)) {
+		ret = PTR_ERR(sta32x->xti_clk);
+
+		if (ret == -EPROBE_DEFER)
+			return ret;
+
+		sta32x->xti_clk = NULL;
+	}
+
+	/* GPIOs */
+	sta32x->gpiod_nreset = devm_gpiod_get_optional(dev, "reset",
+						       GPIOD_OUT_LOW);
+	if (IS_ERR(sta32x->gpiod_nreset))
+		return PTR_ERR(sta32x->gpiod_nreset);
+
+	/* regulators */
+	for (i = 0; i < ARRAY_SIZE(sta32x->supplies); i++)
+		sta32x->supplies[i].supply = sta32x_supply_names[i];
+
+	ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(sta32x->supplies),
+				      sta32x->supplies);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+		return ret;
+	}
+
+	sta32x->regmap = devm_regmap_init_i2c(i2c, &sta32x_regmap);
+	if (IS_ERR(sta32x->regmap)) {
+		ret = PTR_ERR(sta32x->regmap);
+		dev_err(dev, "Failed to init regmap: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(i2c, sta32x);
+
+	ret = devm_snd_soc_register_component(dev, &sta32x_component,
+					      &sta32x_dai, 1);
+	if (ret < 0)
+		dev_err(dev, "Failed to register component (%d)\n", ret);
+
+	return ret;
+}
+
+static const struct i2c_device_id sta32x_i2c_id[] = {
+	{ "sta326", 0 },
+	{ "sta328", 0 },
+	{ "sta329", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sta32x_i2c_id);
+
+static struct i2c_driver sta32x_i2c_driver = {
+	.driver = {
+		.name = "sta32x",
+		.of_match_table = of_match_ptr(st32x_dt_ids),
+	},
+	.probe = sta32x_i2c_probe,
+	.id_table = sta32x_i2c_id,
+};
+
+module_i2c_driver(sta32x_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC STA32X driver");
+MODULE_AUTHOR("Johannes Stezenbach <js@sig21.net>");
+MODULE_LICENSE("GPL");