Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1111 insertions, 0 deletions

diff --git a/sound/soc/codecs/wm8983.c b/sound/soc/codecs/wm8983.c
new file mode 100644
index 0000000000..b26d6a68e8
--- /dev/null
+++ b/sound/soc/codecs/wm8983.c
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * wm8983.c  --  WM8983 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Wolfson Microelectronics plc
+ *
+ * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8983.h"
+
+static const struct reg_default wm8983_defaults[] = {
+	{ 0x01, 0x0000 },     /* R1  - Power management 1 */
+	{ 0x02, 0x0000 },     /* R2  - Power management 2 */
+	{ 0x03, 0x0000 },     /* R3  - Power management 3 */
+	{ 0x04, 0x0050 },     /* R4  - Audio Interface */
+	{ 0x05, 0x0000 },     /* R5  - Companding control */
+	{ 0x06, 0x0140 },     /* R6  - Clock Gen control */
+	{ 0x07, 0x0000 },     /* R7  - Additional control */
+	{ 0x08, 0x0000 },     /* R8  - GPIO Control */
+	{ 0x09, 0x0000 },     /* R9  - Jack Detect Control 1 */
+	{ 0x0A, 0x0000 },     /* R10 - DAC Control */
+	{ 0x0B, 0x00FF },     /* R11 - Left DAC digital Vol */
+	{ 0x0C, 0x00FF },     /* R12 - Right DAC digital vol */
+	{ 0x0D, 0x0000 },     /* R13 - Jack Detect Control 2 */
+	{ 0x0E, 0x0100 },     /* R14 - ADC Control */
+	{ 0x0F, 0x00FF },     /* R15 - Left ADC Digital Vol */
+	{ 0x10, 0x00FF },     /* R16 - Right ADC Digital Vol */
+	{ 0x12, 0x012C },     /* R18 - EQ1 - low shelf */
+	{ 0x13, 0x002C },     /* R19 - EQ2 - peak 1 */
+	{ 0x14, 0x002C },     /* R20 - EQ3 - peak 2 */
+	{ 0x15, 0x002C },     /* R21 - EQ4 - peak 3 */
+	{ 0x16, 0x002C },     /* R22 - EQ5 - high shelf */
+	{ 0x18, 0x0032 },     /* R24 - DAC Limiter 1 */
+	{ 0x19, 0x0000 },     /* R25 - DAC Limiter 2 */
+	{ 0x1B, 0x0000 },     /* R27 - Notch Filter 1 */
+	{ 0x1C, 0x0000 },     /* R28 - Notch Filter 2 */
+	{ 0x1D, 0x0000 },     /* R29 - Notch Filter 3 */
+	{ 0x1E, 0x0000 },     /* R30 - Notch Filter 4 */
+	{ 0x20, 0x0038 },     /* R32 - ALC control 1 */
+	{ 0x21, 0x000B },     /* R33 - ALC control 2 */
+	{ 0x22, 0x0032 },     /* R34 - ALC control 3 */
+	{ 0x23, 0x0000 },     /* R35 - Noise Gate */
+	{ 0x24, 0x0008 },     /* R36 - PLL N */
+	{ 0x25, 0x000C },     /* R37 - PLL K 1 */
+	{ 0x26, 0x0093 },     /* R38 - PLL K 2 */
+	{ 0x27, 0x00E9 },     /* R39 - PLL K 3 */
+	{ 0x29, 0x0000 },     /* R41 - 3D control */
+	{ 0x2A, 0x0000 },     /* R42 - OUT4 to ADC */
+	{ 0x2B, 0x0000 },     /* R43 - Beep control */
+	{ 0x2C, 0x0033 },     /* R44 - Input ctrl */
+	{ 0x2D, 0x0010 },     /* R45 - Left INP PGA gain ctrl */
+	{ 0x2E, 0x0010 },     /* R46 - Right INP PGA gain ctrl */
+	{ 0x2F, 0x0100 },     /* R47 - Left ADC BOOST ctrl */
+	{ 0x30, 0x0100 },     /* R48 - Right ADC BOOST ctrl */
+	{ 0x31, 0x0002 },     /* R49 - Output ctrl */
+	{ 0x32, 0x0001 },     /* R50 - Left mixer ctrl */
+	{ 0x33, 0x0001 },     /* R51 - Right mixer ctrl */
+	{ 0x34, 0x0039 },     /* R52 - LOUT1 (HP) volume ctrl */
+	{ 0x35, 0x0039 },     /* R53 - ROUT1 (HP) volume ctrl */
+	{ 0x36, 0x0039 },     /* R54 - LOUT2 (SPK) volume ctrl */
+	{ 0x37, 0x0039 },     /* R55 - ROUT2 (SPK) volume ctrl */
+	{ 0x38, 0x0001 },     /* R56 - OUT3 mixer ctrl */
+	{ 0x39, 0x0001 },     /* R57 - OUT4 (MONO) mix ctrl */
+	{ 0x3D, 0x0000 },      /* R61 - BIAS CTRL */
+};
+
+/* vol/gain update regs */
+static const int vol_update_regs[] = {
+	WM8983_LEFT_DAC_DIGITAL_VOL,
+	WM8983_RIGHT_DAC_DIGITAL_VOL,
+	WM8983_LEFT_ADC_DIGITAL_VOL,
+	WM8983_RIGHT_ADC_DIGITAL_VOL,
+	WM8983_LOUT1_HP_VOLUME_CTRL,
+	WM8983_ROUT1_HP_VOLUME_CTRL,
+	WM8983_LOUT2_SPK_VOLUME_CTRL,
+	WM8983_ROUT2_SPK_VOLUME_CTRL,
+	WM8983_LEFT_INP_PGA_GAIN_CTRL,
+	WM8983_RIGHT_INP_PGA_GAIN_CTRL
+};
+
+struct wm8983_priv {
+	struct regmap *regmap;
+	u32 sysclk;
+	u32 bclk;
+};
+
+static const struct {
+	int div;
+	int ratio;
+} fs_ratios[] = {
+	{ 10, 128 },
+	{ 15, 192 },
+	{ 20, 256 },
+	{ 30, 384 },
+	{ 40, 512 },
+	{ 60, 768 },
+	{ 80, 1024 },
+	{ 120, 1536 }
+};
+
+static const int srates[] = { 48000, 32000, 24000, 16000, 12000, 8000 };
+
+static const int bclk_divs[] = {
+	1, 2, 4, 8, 16, 32
+};
+
+static int eqmode_get(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol);
+static int eqmode_put(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol);
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -12700, 50, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+static const DECLARE_TLV_DB_SCALE(lim_thresh_tlv, -600, 100, 0);
+static const DECLARE_TLV_DB_SCALE(lim_boost_tlv, 0, 100, 0);
+static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(alc_max_tlv, -675, 600, 0);
+static const DECLARE_TLV_DB_SCALE(alc_tar_tlv, -2250, 150, 0);
+static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0);
+static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(aux_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0);
+
+static const char *alc_sel_text[] = { "Off", "Right", "Left", "Stereo" };
+static SOC_ENUM_SINGLE_DECL(alc_sel, WM8983_ALC_CONTROL_1, 7, alc_sel_text);
+
+static const char *alc_mode_text[] = { "ALC", "Limiter" };
+static SOC_ENUM_SINGLE_DECL(alc_mode, WM8983_ALC_CONTROL_3, 8, alc_mode_text);
+
+static const char *filter_mode_text[] = { "Audio", "Application" };
+static SOC_ENUM_SINGLE_DECL(filter_mode, WM8983_ADC_CONTROL, 7,
+			    filter_mode_text);
+
+static const char *eq_bw_text[] = { "Narrow", "Wide" };
+static const char *eqmode_text[] = { "Capture", "Playback" };
+static SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text);
+
+static const char *eq1_cutoff_text[] = {
+	"80Hz", "105Hz", "135Hz", "175Hz"
+};
+static SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8983_EQ1_LOW_SHELF, 5,
+			    eq1_cutoff_text);
+static const char *eq2_cutoff_text[] = {
+	"230Hz", "300Hz", "385Hz", "500Hz"
+};
+static SOC_ENUM_SINGLE_DECL(eq2_bw, WM8983_EQ2_PEAK_1, 8, eq_bw_text);
+static SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8983_EQ2_PEAK_1, 5, eq2_cutoff_text);
+static const char *eq3_cutoff_text[] = {
+	"650Hz", "850Hz", "1.1kHz", "1.4kHz"
+};
+static SOC_ENUM_SINGLE_DECL(eq3_bw, WM8983_EQ3_PEAK_2, 8, eq_bw_text);
+static SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8983_EQ3_PEAK_2, 5, eq3_cutoff_text);
+static const char *eq4_cutoff_text[] = {
+	"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"
+};
+static SOC_ENUM_SINGLE_DECL(eq4_bw, WM8983_EQ4_PEAK_3, 8, eq_bw_text);
+static SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8983_EQ4_PEAK_3, 5, eq4_cutoff_text);
+static const char *eq5_cutoff_text[] = {
+	"5.3kHz", "6.9kHz", "9kHz", "11.7kHz"
+};
+static SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8983_EQ5_HIGH_SHELF, 5,
+			    eq5_cutoff_text);
+
+static const char *depth_3d_text[] = {
+	"Off",
+	"6.67%",
+	"13.3%",
+	"20%",
+	"26.7%",
+	"33.3%",
+	"40%",
+	"46.6%",
+	"53.3%",
+	"60%",
+	"66.7%",
+	"73.3%",
+	"80%",
+	"86.7%",
+	"93.3%",
+	"100%"
+};
+static SOC_ENUM_SINGLE_DECL(depth_3d, WM8983_3D_CONTROL, 0,
+			    depth_3d_text);
+
+static const struct snd_kcontrol_new wm8983_snd_controls[] = {
+	SOC_SINGLE("Digital Loopback Switch", WM8983_COMPANDING_CONTROL,
+		   0, 1, 0),
+
+	SOC_ENUM("ALC Capture Function", alc_sel),
+	SOC_SINGLE_TLV("ALC Capture Max Volume", WM8983_ALC_CONTROL_1,
+		       3, 7, 0, alc_max_tlv),
+	SOC_SINGLE_TLV("ALC Capture Min Volume", WM8983_ALC_CONTROL_1,
+		       0, 7, 0, alc_min_tlv),
+	SOC_SINGLE_TLV("ALC Capture Target Volume", WM8983_ALC_CONTROL_2,
+		       0, 15, 0, alc_tar_tlv),
+	SOC_SINGLE("ALC Capture Attack", WM8983_ALC_CONTROL_3, 0, 10, 0),
+	SOC_SINGLE("ALC Capture Hold", WM8983_ALC_CONTROL_2, 4, 10, 0),
+	SOC_SINGLE("ALC Capture Decay", WM8983_ALC_CONTROL_3, 4, 10, 0),
+	SOC_ENUM("ALC Mode", alc_mode),
+	SOC_SINGLE("ALC Capture NG Switch", WM8983_NOISE_GATE,
+		   3, 1, 0),
+	SOC_SINGLE("ALC Capture NG Threshold", WM8983_NOISE_GATE,
+		   0, 7, 1),
+
+	SOC_DOUBLE_R_TLV("Capture Volume", WM8983_LEFT_ADC_DIGITAL_VOL,
+			 WM8983_RIGHT_ADC_DIGITAL_VOL, 0, 255, 0, adc_tlv),
+	SOC_DOUBLE_R("Capture PGA ZC Switch", WM8983_LEFT_INP_PGA_GAIN_CTRL,
+		     WM8983_RIGHT_INP_PGA_GAIN_CTRL, 7, 1, 0),
+	SOC_DOUBLE_R_TLV("Capture PGA Volume", WM8983_LEFT_INP_PGA_GAIN_CTRL,
+			 WM8983_RIGHT_INP_PGA_GAIN_CTRL, 0, 63, 0, pga_vol_tlv),
+
+	SOC_DOUBLE_R_TLV("Capture PGA Boost Volume",
+			 WM8983_LEFT_ADC_BOOST_CTRL, WM8983_RIGHT_ADC_BOOST_CTRL,
+			 8, 1, 0, pga_boost_tlv),
+
+	SOC_DOUBLE("ADC Inversion Switch", WM8983_ADC_CONTROL, 0, 1, 1, 0),
+	SOC_SINGLE("ADC 128x Oversampling Switch", WM8983_ADC_CONTROL, 8, 1, 0),
+
+	SOC_DOUBLE_R_TLV("Playback Volume", WM8983_LEFT_DAC_DIGITAL_VOL,
+			 WM8983_RIGHT_DAC_DIGITAL_VOL, 0, 255, 0, dac_tlv),
+
+	SOC_SINGLE("DAC Playback Limiter Switch", WM8983_DAC_LIMITER_1, 8, 1, 0),
+	SOC_SINGLE("DAC Playback Limiter Decay", WM8983_DAC_LIMITER_1, 4, 10, 0),
+	SOC_SINGLE("DAC Playback Limiter Attack", WM8983_DAC_LIMITER_1, 0, 11, 0),
+	SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8983_DAC_LIMITER_2,
+		       4, 7, 1, lim_thresh_tlv),
+	SOC_SINGLE_TLV("DAC Playback Limiter Boost Volume", WM8983_DAC_LIMITER_2,
+		       0, 12, 0, lim_boost_tlv),
+	SOC_DOUBLE("DAC Inversion Switch", WM8983_DAC_CONTROL, 0, 1, 1, 0),
+	SOC_SINGLE("DAC Auto Mute Switch", WM8983_DAC_CONTROL, 2, 1, 0),
+	SOC_SINGLE("DAC 128x Oversampling Switch", WM8983_DAC_CONTROL, 3, 1, 0),
+
+	SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8983_LOUT1_HP_VOLUME_CTRL,
+			 WM8983_ROUT1_HP_VOLUME_CTRL, 0, 63, 0, out_tlv),
+	SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8983_LOUT1_HP_VOLUME_CTRL,
+		     WM8983_ROUT1_HP_VOLUME_CTRL, 7, 1, 0),
+	SOC_DOUBLE_R("Headphone Switch", WM8983_LOUT1_HP_VOLUME_CTRL,
+		     WM8983_ROUT1_HP_VOLUME_CTRL, 6, 1, 1),
+
+	SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8983_LOUT2_SPK_VOLUME_CTRL,
+			 WM8983_ROUT2_SPK_VOLUME_CTRL, 0, 63, 0, out_tlv),
+	SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8983_LOUT2_SPK_VOLUME_CTRL,
+		     WM8983_ROUT2_SPK_VOLUME_CTRL, 7, 1, 0),
+	SOC_DOUBLE_R("Speaker Switch", WM8983_LOUT2_SPK_VOLUME_CTRL,
+		     WM8983_ROUT2_SPK_VOLUME_CTRL, 6, 1, 1),
+
+	SOC_SINGLE("OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
+		   6, 1, 1),
+
+	SOC_SINGLE("OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
+		   6, 1, 1),
+
+	SOC_SINGLE("High Pass Filter Switch", WM8983_ADC_CONTROL, 8, 1, 0),
+	SOC_ENUM("High Pass Filter Mode", filter_mode),
+	SOC_SINGLE("High Pass Filter Cutoff", WM8983_ADC_CONTROL, 4, 7, 0),
+
+	SOC_DOUBLE_R_TLV("Aux Bypass Volume",
+			 WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 6, 7, 0,
+			 aux_tlv),
+
+	SOC_DOUBLE_R_TLV("Input PGA Bypass Volume",
+			 WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 2, 7, 0,
+			 bypass_tlv),
+
+	SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put),
+	SOC_ENUM("EQ1 Cutoff", eq1_cutoff),
+	SOC_SINGLE_TLV("EQ1 Volume", WM8983_EQ1_LOW_SHELF,  0, 24, 1, eq_tlv),
+	SOC_ENUM("EQ2 Bandwidth", eq2_bw),
+	SOC_ENUM("EQ2 Cutoff", eq2_cutoff),
+	SOC_SINGLE_TLV("EQ2 Volume", WM8983_EQ2_PEAK_1, 0, 24, 1, eq_tlv),
+	SOC_ENUM("EQ3 Bandwidth", eq3_bw),
+	SOC_ENUM("EQ3 Cutoff", eq3_cutoff),
+	SOC_SINGLE_TLV("EQ3 Volume", WM8983_EQ3_PEAK_2, 0, 24, 1, eq_tlv),
+	SOC_ENUM("EQ4 Bandwidth", eq4_bw),
+	SOC_ENUM("EQ4 Cutoff", eq4_cutoff),
+	SOC_SINGLE_TLV("EQ4 Volume", WM8983_EQ4_PEAK_3, 0, 24, 1, eq_tlv),
+	SOC_ENUM("EQ5 Cutoff", eq5_cutoff),
+	SOC_SINGLE_TLV("EQ5 Volume", WM8983_EQ5_HIGH_SHELF, 0, 24, 1, eq_tlv),
+
+	SOC_ENUM("3D Depth", depth_3d),
+};
+
+static const struct snd_kcontrol_new left_out_mixer[] = {
+	SOC_DAPM_SINGLE("Line Switch", WM8983_LEFT_MIXER_CTRL, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Switch", WM8983_LEFT_MIXER_CTRL, 5, 1, 0),
+	SOC_DAPM_SINGLE("PCM Switch", WM8983_LEFT_MIXER_CTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_out_mixer[] = {
+	SOC_DAPM_SINGLE("Line Switch", WM8983_RIGHT_MIXER_CTRL, 1, 1, 0),
+	SOC_DAPM_SINGLE("Aux Switch", WM8983_RIGHT_MIXER_CTRL, 5, 1, 0),
+	SOC_DAPM_SINGLE("PCM Switch", WM8983_RIGHT_MIXER_CTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_input_mixer[] = {
+	SOC_DAPM_SINGLE("L2 Switch", WM8983_INPUT_CTRL, 2, 1, 0),
+	SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 1, 1, 0),
+	SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_input_mixer[] = {
+	SOC_DAPM_SINGLE("R2 Switch", WM8983_INPUT_CTRL, 6, 1, 0),
+	SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 5, 1, 0),
+	SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_boost_mixer[] = {
+	SOC_DAPM_SINGLE_TLV("L2 Volume", WM8983_LEFT_ADC_BOOST_CTRL,
+			    4, 7, 0, boost_tlv),
+	SOC_DAPM_SINGLE_TLV("AUXL Volume", WM8983_LEFT_ADC_BOOST_CTRL,
+			    0, 7, 0, boost_tlv)
+};
+
+static const struct snd_kcontrol_new out3_mixer[] = {
+	SOC_DAPM_SINGLE("LMIX2OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
+			1, 1, 0),
+	SOC_DAPM_SINGLE("LDAC2OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
+			0, 1, 0),
+};
+
+static const struct snd_kcontrol_new out4_mixer[] = {
+	SOC_DAPM_SINGLE("LMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
+			4, 1, 0),
+	SOC_DAPM_SINGLE("RMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
+			1, 1, 0),
+	SOC_DAPM_SINGLE("LDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
+			3, 1, 0),
+	SOC_DAPM_SINGLE("RDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
+			0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_boost_mixer[] = {
+	SOC_DAPM_SINGLE_TLV("R2 Volume", WM8983_RIGHT_ADC_BOOST_CTRL,
+			    4, 7, 0, boost_tlv),
+	SOC_DAPM_SINGLE_TLV("AUXR Volume", WM8983_RIGHT_ADC_BOOST_CTRL,
+			    0, 7, 0, boost_tlv)
+};
+
+static const struct snd_soc_dapm_widget wm8983_dapm_widgets[] = {
+	SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8983_POWER_MANAGEMENT_3,
+			 0, 0),
+	SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8983_POWER_MANAGEMENT_3,
+			 1, 0),
+	SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8983_POWER_MANAGEMENT_2,
+			 0, 0),
+	SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8983_POWER_MANAGEMENT_2,
+			 1, 0),
+
+	SND_SOC_DAPM_MIXER("Left Output Mixer", WM8983_POWER_MANAGEMENT_3,
+			   2, 0, left_out_mixer, ARRAY_SIZE(left_out_mixer)),
+	SND_SOC_DAPM_MIXER("Right Output Mixer", WM8983_POWER_MANAGEMENT_3,
+			   3, 0, right_out_mixer, ARRAY_SIZE(right_out_mixer)),
+
+	SND_SOC_DAPM_MIXER("Left Input Mixer", WM8983_POWER_MANAGEMENT_2,
+			   2, 0, left_input_mixer, ARRAY_SIZE(left_input_mixer)),
+	SND_SOC_DAPM_MIXER("Right Input Mixer", WM8983_POWER_MANAGEMENT_2,
+			   3, 0, right_input_mixer, ARRAY_SIZE(right_input_mixer)),
+
+	SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8983_POWER_MANAGEMENT_2,
+			   4, 0, left_boost_mixer, ARRAY_SIZE(left_boost_mixer)),
+	SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8983_POWER_MANAGEMENT_2,
+			   5, 0, right_boost_mixer, ARRAY_SIZE(right_boost_mixer)),
+
+	SND_SOC_DAPM_MIXER("OUT3 Mixer", WM8983_POWER_MANAGEMENT_1,
+			   6, 0, out3_mixer, ARRAY_SIZE(out3_mixer)),
+
+	SND_SOC_DAPM_MIXER("OUT4 Mixer", WM8983_POWER_MANAGEMENT_1,
+			   7, 0, out4_mixer, ARRAY_SIZE(out4_mixer)),
+
+	SND_SOC_DAPM_PGA("Left Capture PGA", WM8983_LEFT_INP_PGA_GAIN_CTRL,
+			 6, 1, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Capture PGA", WM8983_RIGHT_INP_PGA_GAIN_CTRL,
+			 6, 1, NULL, 0),
+
+	SND_SOC_DAPM_PGA("Left Headphone Out", WM8983_POWER_MANAGEMENT_2,
+			 7, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Headphone Out", WM8983_POWER_MANAGEMENT_2,
+			 8, 0, NULL, 0),
+
+	SND_SOC_DAPM_PGA("Left Speaker Out", WM8983_POWER_MANAGEMENT_3,
+			 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Speaker Out", WM8983_POWER_MANAGEMENT_3,
+			 6, 0, NULL, 0),
+
+	SND_SOC_DAPM_PGA("OUT3 Out", WM8983_POWER_MANAGEMENT_3,
+			 7, 0, NULL, 0),
+
+	SND_SOC_DAPM_PGA("OUT4 Out", WM8983_POWER_MANAGEMENT_3,
+			 8, 0, NULL, 0),
+
+	SND_SOC_DAPM_SUPPLY("Mic Bias", WM8983_POWER_MANAGEMENT_1, 4, 0,
+			    NULL, 0),
+
+	SND_SOC_DAPM_INPUT("LIN"),
+	SND_SOC_DAPM_INPUT("LIP"),
+	SND_SOC_DAPM_INPUT("RIN"),
+	SND_SOC_DAPM_INPUT("RIP"),
+	SND_SOC_DAPM_INPUT("AUXL"),
+	SND_SOC_DAPM_INPUT("AUXR"),
+	SND_SOC_DAPM_INPUT("L2"),
+	SND_SOC_DAPM_INPUT("R2"),
+	SND_SOC_DAPM_OUTPUT("HPL"),
+	SND_SOC_DAPM_OUTPUT("HPR"),
+	SND_SOC_DAPM_OUTPUT("SPKL"),
+	SND_SOC_DAPM_OUTPUT("SPKR"),
+	SND_SOC_DAPM_OUTPUT("OUT3"),
+	SND_SOC_DAPM_OUTPUT("OUT4")
+};
+
+static const struct snd_soc_dapm_route wm8983_audio_map[] = {
+	{ "OUT3 Mixer", "LMIX2OUT3 Switch", "Left Output Mixer" },
+	{ "OUT3 Mixer", "LDAC2OUT3 Switch", "Left DAC" },
+
+	{ "OUT3 Out", NULL, "OUT3 Mixer" },
+	{ "OUT3", NULL, "OUT3 Out" },
+
+	{ "OUT4 Mixer", "LMIX2OUT4 Switch", "Left Output Mixer" },
+	{ "OUT4 Mixer", "RMIX2OUT4 Switch", "Right Output Mixer" },
+	{ "OUT4 Mixer", "LDAC2OUT4 Switch", "Left DAC" },
+	{ "OUT4 Mixer", "RDAC2OUT4 Switch", "Right DAC" },
+
+	{ "OUT4 Out", NULL, "OUT4 Mixer" },
+	{ "OUT4", NULL, "OUT4 Out" },
+
+	{ "Right Output Mixer", "PCM Switch", "Right DAC" },
+	{ "Right Output Mixer", "Aux Switch", "AUXR" },
+	{ "Right Output Mixer", "Line Switch", "Right Boost Mixer" },
+
+	{ "Left Output Mixer", "PCM Switch", "Left DAC" },
+	{ "Left Output Mixer", "Aux Switch", "AUXL" },
+	{ "Left Output Mixer", "Line Switch", "Left Boost Mixer" },
+
+	{ "Right Headphone Out", NULL, "Right Output Mixer" },
+	{ "HPR", NULL, "Right Headphone Out" },
+
+	{ "Left Headphone Out", NULL, "Left Output Mixer" },
+	{ "HPL", NULL, "Left Headphone Out" },
+
+	{ "Right Speaker Out", NULL, "Right Output Mixer" },
+	{ "SPKR", NULL, "Right Speaker Out" },
+
+	{ "Left Speaker Out", NULL, "Left Output Mixer" },
+	{ "SPKL", NULL, "Left Speaker Out" },
+
+	{ "Right ADC", NULL, "Right Boost Mixer" },
+
+	{ "Right Boost Mixer", "AUXR Volume", "AUXR" },
+	{ "Right Boost Mixer", NULL, "Right Capture PGA" },
+	{ "Right Boost Mixer", "R2 Volume", "R2" },
+
+	{ "Left ADC", NULL, "Left Boost Mixer" },
+
+	{ "Left Boost Mixer", "AUXL Volume", "AUXL" },
+	{ "Left Boost Mixer", NULL, "Left Capture PGA" },
+	{ "Left Boost Mixer", "L2 Volume", "L2" },
+
+	{ "Right Capture PGA", NULL, "Right Input Mixer" },
+	{ "Left Capture PGA", NULL, "Left Input Mixer" },
+
+	{ "Right Input Mixer", "R2 Switch", "R2" },
+	{ "Right Input Mixer", "MicN Switch", "RIN" },
+	{ "Right Input Mixer", "MicP Switch", "RIP" },
+
+	{ "Left Input Mixer", "L2 Switch", "L2" },
+	{ "Left Input Mixer", "MicN Switch", "LIN" },
+	{ "Left Input Mixer", "MicP Switch", "LIP" },
+};
+
+static int eqmode_get(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	unsigned int reg;
+
+	reg = snd_soc_component_read(component, WM8983_EQ1_LOW_SHELF);
+	if (reg & WM8983_EQ3DMODE)
+		ucontrol->value.enumerated.item[0] = 1;
+	else
+		ucontrol->value.enumerated.item[0] = 0;
+
+	return 0;
+}
+
+static int eqmode_put(struct snd_kcontrol *kcontrol,
+		      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+	unsigned int regpwr2, regpwr3;
+	unsigned int reg_eq;
+
+	if (ucontrol->value.enumerated.item[0] != 0
+	    && ucontrol->value.enumerated.item[0] != 1)
+		return -EINVAL;
+
+	reg_eq = snd_soc_component_read(component, WM8983_EQ1_LOW_SHELF);
+	switch ((reg_eq & WM8983_EQ3DMODE) >> WM8983_EQ3DMODE_SHIFT) {
+	case 0:
+		if (!ucontrol->value.enumerated.item[0])
+			return 0;
+		break;
+	case 1:
+		if (ucontrol->value.enumerated.item[0])
+			return 0;
+		break;
+	}
+
+	regpwr2 = snd_soc_component_read(component, WM8983_POWER_MANAGEMENT_2);
+	regpwr3 = snd_soc_component_read(component, WM8983_POWER_MANAGEMENT_3);
+	/* disable the DACs and ADCs */
+	snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_2,
+			    WM8983_ADCENR_MASK | WM8983_ADCENL_MASK, 0);
+	snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_3,
+			    WM8983_DACENR_MASK | WM8983_DACENL_MASK, 0);
+	/* set the desired eqmode */
+	snd_soc_component_update_bits(component, WM8983_EQ1_LOW_SHELF,
+			    WM8983_EQ3DMODE_MASK,
+			    ucontrol->value.enumerated.item[0]
+			    << WM8983_EQ3DMODE_SHIFT);
+	/* restore DAC/ADC configuration */
+	snd_soc_component_write(component, WM8983_POWER_MANAGEMENT_2, regpwr2);
+	snd_soc_component_write(component, WM8983_POWER_MANAGEMENT_3, regpwr3);
+	return 0;
+}
+
+static bool wm8983_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case WM8983_SOFTWARE_RESET ... WM8983_RIGHT_ADC_DIGITAL_VOL:
+	case WM8983_EQ1_LOW_SHELF ... WM8983_DAC_LIMITER_2:
+	case WM8983_NOTCH_FILTER_1 ... WM8983_NOTCH_FILTER_4:
+	case WM8983_ALC_CONTROL_1 ... WM8983_PLL_K_3:
+	case WM8983_3D_CONTROL ... WM8983_OUT4_MONO_MIX_CTRL:
+	case WM8983_BIAS_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int wm8983_dac_mute(struct snd_soc_dai *dai, int mute, int direction)
+{
+	struct snd_soc_component *component = dai->component;
+
+	return snd_soc_component_update_bits(component, WM8983_DAC_CONTROL,
+				   WM8983_SOFTMUTE_MASK,
+				   !!mute << WM8983_SOFTMUTE_SHIFT);
+}
+
+static int wm8983_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_component *component = dai->component;
+	u16 format, master, bcp, lrp;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		format = 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		format = 0x0;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		format = 0x1;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		format = 0x3;
+		break;
+	default:
+		dev_err(dai->dev, "Unknown dai format\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, WM8983_AUDIO_INTERFACE,
+			    WM8983_FMT_MASK, format << WM8983_FMT_SHIFT);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		master = 1;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		master = 0;
+		break;
+	default:
+		dev_err(dai->dev, "Unknown master/slave configuration\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, WM8983_CLOCK_GEN_CONTROL,
+			    WM8983_MS_MASK, master << WM8983_MS_SHIFT);
+
+	/* FIXME: We don't currently support DSP A/B modes */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		dev_err(dai->dev, "DSP A/B modes are not supported\n");
+		return -EINVAL;
+	default:
+		break;
+	}
+
+	bcp = lrp = 0;
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		bcp = lrp = 1;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		bcp = 1;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		lrp = 1;
+		break;
+	default:
+		dev_err(dai->dev, "Unknown polarity configuration\n");
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, WM8983_AUDIO_INTERFACE,
+			    WM8983_LRCP_MASK, lrp << WM8983_LRCP_SHIFT);
+	snd_soc_component_update_bits(component, WM8983_AUDIO_INTERFACE,
+			    WM8983_BCP_MASK, bcp << WM8983_BCP_SHIFT);
+	return 0;
+}
+
+static int wm8983_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	int i;
+	struct snd_soc_component *component = dai->component;
+	struct wm8983_priv *wm8983 = snd_soc_component_get_drvdata(component);
+	u16 blen, srate_idx;
+	u32 tmp;
+	int srate_best;
+	int ret;
+
+	ret = snd_soc_params_to_bclk(params);
+	if (ret < 0) {
+		dev_err(component->dev, "Failed to convert params to bclk: %d\n", ret);
+		return ret;
+	}
+
+	wm8983->bclk = ret;
+
+	switch (params_width(params)) {
+	case 16:
+		blen = 0x0;
+		break;
+	case 20:
+		blen = 0x1;
+		break;
+	case 24:
+		blen = 0x2;
+		break;
+	case 32:
+		blen = 0x3;
+		break;
+	default:
+		dev_err(dai->dev, "Unsupported word length %u\n",
+			params_width(params));
+		return -EINVAL;
+	}
+
+	snd_soc_component_update_bits(component, WM8983_AUDIO_INTERFACE,
+			    WM8983_WL_MASK, blen << WM8983_WL_SHIFT);
+
+	/*
+	 * match to the nearest possible sample rate and rely
+	 * on the array index to configure the SR register
+	 */
+	srate_idx = 0;
+	srate_best = abs(srates[0] - params_rate(params));
+	for (i = 1; i < ARRAY_SIZE(srates); ++i) {
+		if (abs(srates[i] - params_rate(params)) >= srate_best)
+			continue;
+		srate_idx = i;
+		srate_best = abs(srates[i] - params_rate(params));
+	}
+
+	dev_dbg(dai->dev, "Selected SRATE = %d\n", srates[srate_idx]);
+	snd_soc_component_update_bits(component, WM8983_ADDITIONAL_CONTROL,
+			    WM8983_SR_MASK, srate_idx << WM8983_SR_SHIFT);
+
+	dev_dbg(dai->dev, "Target BCLK = %uHz\n", wm8983->bclk);
+	dev_dbg(dai->dev, "SYSCLK = %uHz\n", wm8983->sysclk);
+
+	for (i = 0; i < ARRAY_SIZE(fs_ratios); ++i) {
+		if (wm8983->sysclk / params_rate(params)
+		    == fs_ratios[i].ratio)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(fs_ratios)) {
+		dev_err(dai->dev, "Unable to configure MCLK ratio %u/%u\n",
+			wm8983->sysclk, params_rate(params));
+		return -EINVAL;
+	}
+
+	dev_dbg(dai->dev, "MCLK ratio = %dfs\n", fs_ratios[i].ratio);
+	snd_soc_component_update_bits(component, WM8983_CLOCK_GEN_CONTROL,
+			    WM8983_MCLKDIV_MASK, i << WM8983_MCLKDIV_SHIFT);
+
+	/* select the appropriate bclk divider */
+	tmp = (wm8983->sysclk / fs_ratios[i].div) * 10;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); ++i) {
+		if (wm8983->bclk == tmp / bclk_divs[i])
+			break;
+	}
+
+	if (i == ARRAY_SIZE(bclk_divs)) {
+		dev_err(dai->dev, "No matching BCLK divider found\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dai->dev, "BCLK div = %d\n", i);
+	snd_soc_component_update_bits(component, WM8983_CLOCK_GEN_CONTROL,
+			    WM8983_BCLKDIV_MASK, i << WM8983_BCLKDIV_SHIFT);
+
+	return 0;
+}
+
+struct pll_div {
+	u32 div2:1;
+	u32 n:4;
+	u32 k:24;
+};
+
+#define FIXED_PLL_SIZE ((1ULL << 24) * 10)
+static int pll_factors(struct pll_div *pll_div, unsigned int target,
+		       unsigned int source)
+{
+	u64 Kpart;
+	unsigned long int K, Ndiv, Nmod;
+
+	pll_div->div2 = 0;
+	Ndiv = target / source;
+	if (Ndiv < 6) {
+		source >>= 1;
+		pll_div->div2 = 1;
+		Ndiv = target / source;
+	}
+
+	if (Ndiv < 6 || Ndiv > 12) {
+		printk(KERN_ERR "%s: WM8983 N value is not within"
+		       " the recommended range: %lu\n", __func__, Ndiv);
+		return -EINVAL;
+	}
+	pll_div->n = Ndiv;
+
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (u64)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xffffffff;
+	if ((K % 10) >= 5)
+		K += 5;
+	K /= 10;
+	pll_div->k = K;
+	return 0;
+}
+
+static int wm8983_set_pll(struct snd_soc_dai *dai, int pll_id,
+			  int source, unsigned int freq_in,
+			  unsigned int freq_out)
+{
+	int ret;
+	struct snd_soc_component *component;
+	struct pll_div pll_div;
+
+	component = dai->component;
+	if (!freq_in || !freq_out) {
+		/* disable the PLL */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_PLLEN_MASK, 0);
+		return 0;
+	} else {
+		ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in);
+		if (ret)
+			return ret;
+
+		/* disable the PLL before re-programming it */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_PLLEN_MASK, 0);
+
+		/* set PLLN and PRESCALE */
+		snd_soc_component_write(component, WM8983_PLL_N,
+			(pll_div.div2 << WM8983_PLL_PRESCALE_SHIFT)
+			| pll_div.n);
+		/* set PLLK */
+		snd_soc_component_write(component, WM8983_PLL_K_3, pll_div.k & 0x1ff);
+		snd_soc_component_write(component, WM8983_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
+		snd_soc_component_write(component, WM8983_PLL_K_1, (pll_div.k >> 18));
+		/* enable the PLL */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+					WM8983_PLLEN_MASK, WM8983_PLLEN);
+	}
+
+	return 0;
+}
+
+static int wm8983_set_sysclk(struct snd_soc_dai *dai,
+			     int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_component *component = dai->component;
+	struct wm8983_priv *wm8983 = snd_soc_component_get_drvdata(component);
+
+	switch (clk_id) {
+	case WM8983_CLKSRC_MCLK:
+		snd_soc_component_update_bits(component, WM8983_CLOCK_GEN_CONTROL,
+				    WM8983_CLKSEL_MASK, 0);
+		break;
+	case WM8983_CLKSRC_PLL:
+		snd_soc_component_update_bits(component, WM8983_CLOCK_GEN_CONTROL,
+				    WM8983_CLKSEL_MASK, WM8983_CLKSEL);
+		break;
+	default:
+		dev_err(dai->dev, "Unknown clock source: %d\n", clk_id);
+		return -EINVAL;
+	}
+
+	wm8983->sysclk = freq;
+	return 0;
+}
+
+static int wm8983_set_bias_level(struct snd_soc_component *component,
+				 enum snd_soc_bias_level level)
+{
+	struct wm8983_priv *wm8983 = snd_soc_component_get_drvdata(component);
+	int ret;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+		/* VMID at 100k */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_VMIDSEL_MASK,
+				    1 << WM8983_VMIDSEL_SHIFT);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+			ret = regcache_sync(wm8983->regmap);
+			if (ret < 0) {
+				dev_err(component->dev, "Failed to sync cache: %d\n", ret);
+				return ret;
+			}
+			/* enable anti-pop features */
+			snd_soc_component_update_bits(component, WM8983_OUT4_TO_ADC,
+					    WM8983_POBCTRL_MASK | WM8983_DELEN_MASK,
+					    WM8983_POBCTRL | WM8983_DELEN);
+			/* enable thermal shutdown */
+			snd_soc_component_update_bits(component, WM8983_OUTPUT_CTRL,
+					    WM8983_TSDEN_MASK, WM8983_TSDEN);
+			/* enable BIASEN */
+			snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+					    WM8983_BIASEN_MASK, WM8983_BIASEN);
+			/* VMID at 100k */
+			snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+					    WM8983_VMIDSEL_MASK,
+					    1 << WM8983_VMIDSEL_SHIFT);
+			msleep(250);
+			/* disable anti-pop features */
+			snd_soc_component_update_bits(component, WM8983_OUT4_TO_ADC,
+					    WM8983_POBCTRL_MASK |
+					    WM8983_DELEN_MASK, 0);
+		}
+
+		/* VMID at 500k */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_VMIDSEL_MASK,
+				    2 << WM8983_VMIDSEL_SHIFT);
+		break;
+	case SND_SOC_BIAS_OFF:
+		/* disable thermal shutdown */
+		snd_soc_component_update_bits(component, WM8983_OUTPUT_CTRL,
+				    WM8983_TSDEN_MASK, 0);
+		/* disable VMIDSEL and BIASEN */
+		snd_soc_component_update_bits(component, WM8983_POWER_MANAGEMENT_1,
+				    WM8983_VMIDSEL_MASK | WM8983_BIASEN_MASK,
+				    0);
+		/* wait for VMID to discharge */
+		msleep(100);
+		snd_soc_component_write(component, WM8983_POWER_MANAGEMENT_1, 0);
+		snd_soc_component_write(component, WM8983_POWER_MANAGEMENT_2, 0);
+		snd_soc_component_write(component, WM8983_POWER_MANAGEMENT_3, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int wm8983_probe(struct snd_soc_component *component)
+{
+	int ret;
+	int i;
+
+	ret = snd_soc_component_write(component, WM8983_SOFTWARE_RESET, 0);
+	if (ret < 0) {
+		dev_err(component->dev, "Failed to issue reset: %d\n", ret);
+		return ret;
+	}
+
+	/* set the vol/gain update bits */
+	for (i = 0; i < ARRAY_SIZE(vol_update_regs); ++i)
+		snd_soc_component_update_bits(component, vol_update_regs[i],
+				    0x100, 0x100);
+
+	/* mute all outputs and set PGAs to minimum gain */
+	for (i = WM8983_LOUT1_HP_VOLUME_CTRL;
+	     i <= WM8983_OUT4_MONO_MIX_CTRL; ++i)
+		snd_soc_component_update_bits(component, i, 0x40, 0x40);
+
+	/* enable soft mute */
+	snd_soc_component_update_bits(component, WM8983_DAC_CONTROL,
+			    WM8983_SOFTMUTE_MASK,
+			    WM8983_SOFTMUTE);
+
+	/* enable BIASCUT */
+	snd_soc_component_update_bits(component, WM8983_BIAS_CTRL,
+			    WM8983_BIASCUT, WM8983_BIASCUT);
+	return 0;
+}
+
+static const struct snd_soc_dai_ops wm8983_dai_ops = {
+	.mute_stream = wm8983_dac_mute,
+	.hw_params = wm8983_hw_params,
+	.set_fmt = wm8983_set_fmt,
+	.set_sysclk = wm8983_set_sysclk,
+	.set_pll = wm8983_set_pll,
+	.no_capture_mute = 1,
+};
+
+#define WM8983_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver wm8983_dai = {
+	.name = "wm8983-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = WM8983_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = WM8983_FORMATS,
+	},
+	.ops = &wm8983_dai_ops,
+	.symmetric_rate = 1
+};
+
+static const struct snd_soc_component_driver soc_component_dev_wm8983 = {
+	.probe			= wm8983_probe,
+	.set_bias_level		= wm8983_set_bias_level,
+	.controls		= wm8983_snd_controls,
+	.num_controls		= ARRAY_SIZE(wm8983_snd_controls),
+	.dapm_widgets		= wm8983_dapm_widgets,
+	.num_dapm_widgets	= ARRAY_SIZE(wm8983_dapm_widgets),
+	.dapm_routes		= wm8983_audio_map,
+	.num_dapm_routes	= ARRAY_SIZE(wm8983_audio_map),
+	.suspend_bias_off	= 1,
+	.idle_bias_on		= 1,
+	.use_pmdown_time	= 1,
+	.endianness		= 1,
+};
+
+static const struct regmap_config wm8983_regmap = {
+	.reg_bits = 7,
+	.val_bits = 9,
+
+	.reg_defaults = wm8983_defaults,
+	.num_reg_defaults = ARRAY_SIZE(wm8983_defaults),
+	.cache_type = REGCACHE_MAPLE,
+	.max_register = WM8983_MAX_REGISTER,
+
+	.writeable_reg = wm8983_writeable,
+};
+
+#if defined(CONFIG_SPI_MASTER)
+static int wm8983_spi_probe(struct spi_device *spi)
+{
+	struct wm8983_priv *wm8983;
+	int ret;
+
+	wm8983 = devm_kzalloc(&spi->dev, sizeof *wm8983, GFP_KERNEL);
+	if (!wm8983)
+		return -ENOMEM;
+
+	wm8983->regmap = devm_regmap_init_spi(spi, &wm8983_regmap);
+	if (IS_ERR(wm8983->regmap)) {
+		ret = PTR_ERR(wm8983->regmap);
+		dev_err(&spi->dev, "Failed to init regmap: %d\n", ret);
+		return ret;
+	}
+
+	spi_set_drvdata(spi, wm8983);
+
+	ret = devm_snd_soc_register_component(&spi->dev,
+				&soc_component_dev_wm8983, &wm8983_dai, 1);
+	return ret;
+}
+
+static struct spi_driver wm8983_spi_driver = {
+	.driver = {
+		.name = "wm8983",
+	},
+	.probe = wm8983_spi_probe,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_I2C)
+static int wm8983_i2c_probe(struct i2c_client *i2c)
+{
+	struct wm8983_priv *wm8983;
+	int ret;
+
+	wm8983 = devm_kzalloc(&i2c->dev, sizeof *wm8983, GFP_KERNEL);
+	if (!wm8983)
+		return -ENOMEM;
+
+	wm8983->regmap = devm_regmap_init_i2c(i2c, &wm8983_regmap);
+	if (IS_ERR(wm8983->regmap)) {
+		ret = PTR_ERR(wm8983->regmap);
+		dev_err(&i2c->dev, "Failed to init regmap: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(i2c, wm8983);
+
+	ret = devm_snd_soc_register_component(&i2c->dev,
+				&soc_component_dev_wm8983, &wm8983_dai, 1);
+
+	return ret;
+}
+
+static const struct i2c_device_id wm8983_i2c_id[] = {
+	{ "wm8983", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8983_i2c_id);
+
+static struct i2c_driver wm8983_i2c_driver = {
+	.driver = {
+		.name = "wm8983",
+	},
+	.probe = wm8983_i2c_probe,
+	.id_table = wm8983_i2c_id
+};
+#endif
+
+static int __init wm8983_modinit(void)
+{
+	int ret = 0;
+
+#if IS_ENABLED(CONFIG_I2C)
+	ret = i2c_add_driver(&wm8983_i2c_driver);
+	if (ret) {
+		printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n",
+		       ret);
+	}
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8983_spi_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register wm8983 SPI driver: %d\n",
+		       ret);
+	}
+#endif
+	return ret;
+}
+module_init(wm8983_modinit);
+
+static void __exit wm8983_exit(void)
+{
+#if IS_ENABLED(CONFIG_I2C)
+	i2c_del_driver(&wm8983_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8983_spi_driver);
+#endif
+}
+module_exit(wm8983_exit);
+
+MODULE_DESCRIPTION("ASoC WM8983 driver");
+MODULE_AUTHOR("Dimitris Papastamos <dp@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");