Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1235 insertions, 0 deletions

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
new file mode 100644
index 0000000000..3c025dabaf
--- /dev/null
+++ b/sound/soc/codecs/wsa881x.c
@@ -0,0 +1,1235 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2015-2017, The Linux Foundation.
+// Copyright (c) 2019, Linaro Limited
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_registers.h>
+#include <linux/soundwire/sdw_type.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+
+#define WSA881X_DIGITAL_BASE		0x3000
+#define WSA881X_ANALOG_BASE		0x3100
+
+/* Digital register address space */
+#define WSA881X_CHIP_ID0			(WSA881X_DIGITAL_BASE + 0x0000)
+#define WSA881X_CHIP_ID1			(WSA881X_DIGITAL_BASE + 0x0001)
+#define WSA881X_CHIP_ID2			(WSA881X_DIGITAL_BASE + 0x0002)
+#define WSA881X_CHIP_ID3			(WSA881X_DIGITAL_BASE + 0x0003)
+#define WSA881X_BUS_ID				(WSA881X_DIGITAL_BASE + 0x0004)
+#define WSA881X_CDC_RST_CTL			(WSA881X_DIGITAL_BASE + 0x0005)
+#define WSA881X_CDC_TOP_CLK_CTL			(WSA881X_DIGITAL_BASE + 0x0006)
+#define WSA881X_CDC_ANA_CLK_CTL			(WSA881X_DIGITAL_BASE + 0x0007)
+#define WSA881X_CDC_DIG_CLK_CTL			(WSA881X_DIGITAL_BASE + 0x0008)
+#define WSA881X_CLOCK_CONFIG			(WSA881X_DIGITAL_BASE + 0x0009)
+#define WSA881X_ANA_CTL				(WSA881X_DIGITAL_BASE + 0x000A)
+#define WSA881X_SWR_RESET_EN			(WSA881X_DIGITAL_BASE + 0x000B)
+#define WSA881X_RESET_CTL			(WSA881X_DIGITAL_BASE + 0x000C)
+#define WSA881X_TADC_VALUE_CTL			(WSA881X_DIGITAL_BASE + 0x000F)
+#define WSA881X_TEMP_DETECT_CTL			(WSA881X_DIGITAL_BASE + 0x0010)
+#define WSA881X_TEMP_MSB			(WSA881X_DIGITAL_BASE + 0x0011)
+#define WSA881X_TEMP_LSB			(WSA881X_DIGITAL_BASE + 0x0012)
+#define WSA881X_TEMP_CONFIG0			(WSA881X_DIGITAL_BASE + 0x0013)
+#define WSA881X_TEMP_CONFIG1			(WSA881X_DIGITAL_BASE + 0x0014)
+#define WSA881X_CDC_CLIP_CTL			(WSA881X_DIGITAL_BASE + 0x0015)
+#define WSA881X_SDM_PDM9_LSB			(WSA881X_DIGITAL_BASE + 0x0016)
+#define WSA881X_SDM_PDM9_MSB			(WSA881X_DIGITAL_BASE + 0x0017)
+#define WSA881X_CDC_RX_CTL			(WSA881X_DIGITAL_BASE + 0x0018)
+#define WSA881X_DEM_BYPASS_DATA0		(WSA881X_DIGITAL_BASE + 0x0019)
+#define WSA881X_DEM_BYPASS_DATA1		(WSA881X_DIGITAL_BASE + 0x001A)
+#define WSA881X_DEM_BYPASS_DATA2		(WSA881X_DIGITAL_BASE + 0x001B)
+#define WSA881X_DEM_BYPASS_DATA3		(WSA881X_DIGITAL_BASE + 0x001C)
+#define WSA881X_OTP_CTRL0			(WSA881X_DIGITAL_BASE + 0x001D)
+#define WSA881X_OTP_CTRL1			(WSA881X_DIGITAL_BASE + 0x001E)
+#define WSA881X_HDRIVE_CTL_GROUP1		(WSA881X_DIGITAL_BASE + 0x001F)
+#define WSA881X_INTR_MODE			(WSA881X_DIGITAL_BASE + 0x0020)
+#define WSA881X_INTR_MASK			(WSA881X_DIGITAL_BASE + 0x0021)
+#define WSA881X_INTR_STATUS			(WSA881X_DIGITAL_BASE + 0x0022)
+#define WSA881X_INTR_CLEAR			(WSA881X_DIGITAL_BASE + 0x0023)
+#define WSA881X_INTR_LEVEL			(WSA881X_DIGITAL_BASE + 0x0024)
+#define WSA881X_INTR_SET			(WSA881X_DIGITAL_BASE + 0x0025)
+#define WSA881X_INTR_TEST			(WSA881X_DIGITAL_BASE + 0x0026)
+#define WSA881X_PDM_TEST_MODE			(WSA881X_DIGITAL_BASE + 0x0030)
+#define WSA881X_ATE_TEST_MODE			(WSA881X_DIGITAL_BASE + 0x0031)
+#define WSA881X_PIN_CTL_MODE			(WSA881X_DIGITAL_BASE + 0x0032)
+#define WSA881X_PIN_CTL_OE			(WSA881X_DIGITAL_BASE + 0x0033)
+#define WSA881X_PIN_WDATA_IOPAD			(WSA881X_DIGITAL_BASE + 0x0034)
+#define WSA881X_PIN_STATUS			(WSA881X_DIGITAL_BASE + 0x0035)
+#define WSA881X_DIG_DEBUG_MODE			(WSA881X_DIGITAL_BASE + 0x0037)
+#define WSA881X_DIG_DEBUG_SEL			(WSA881X_DIGITAL_BASE + 0x0038)
+#define WSA881X_DIG_DEBUG_EN			(WSA881X_DIGITAL_BASE + 0x0039)
+#define WSA881X_SWR_HM_TEST1			(WSA881X_DIGITAL_BASE + 0x003B)
+#define WSA881X_SWR_HM_TEST2			(WSA881X_DIGITAL_BASE + 0x003C)
+#define WSA881X_TEMP_DETECT_DBG_CTL		(WSA881X_DIGITAL_BASE + 0x003D)
+#define WSA881X_TEMP_DEBUG_MSB			(WSA881X_DIGITAL_BASE + 0x003E)
+#define WSA881X_TEMP_DEBUG_LSB			(WSA881X_DIGITAL_BASE + 0x003F)
+#define WSA881X_SAMPLE_EDGE_SEL			(WSA881X_DIGITAL_BASE + 0x0044)
+#define WSA881X_IOPAD_CTL			(WSA881X_DIGITAL_BASE + 0x0045)
+#define WSA881X_SPARE_0				(WSA881X_DIGITAL_BASE + 0x0050)
+#define WSA881X_SPARE_1				(WSA881X_DIGITAL_BASE + 0x0051)
+#define WSA881X_SPARE_2				(WSA881X_DIGITAL_BASE + 0x0052)
+#define WSA881X_OTP_REG_0			(WSA881X_DIGITAL_BASE + 0x0080)
+#define WSA881X_OTP_REG_1			(WSA881X_DIGITAL_BASE + 0x0081)
+#define WSA881X_OTP_REG_2			(WSA881X_DIGITAL_BASE + 0x0082)
+#define WSA881X_OTP_REG_3			(WSA881X_DIGITAL_BASE + 0x0083)
+#define WSA881X_OTP_REG_4			(WSA881X_DIGITAL_BASE + 0x0084)
+#define WSA881X_OTP_REG_5			(WSA881X_DIGITAL_BASE + 0x0085)
+#define WSA881X_OTP_REG_6			(WSA881X_DIGITAL_BASE + 0x0086)
+#define WSA881X_OTP_REG_7			(WSA881X_DIGITAL_BASE + 0x0087)
+#define WSA881X_OTP_REG_8			(WSA881X_DIGITAL_BASE + 0x0088)
+#define WSA881X_OTP_REG_9			(WSA881X_DIGITAL_BASE + 0x0089)
+#define WSA881X_OTP_REG_10			(WSA881X_DIGITAL_BASE + 0x008A)
+#define WSA881X_OTP_REG_11			(WSA881X_DIGITAL_BASE + 0x008B)
+#define WSA881X_OTP_REG_12			(WSA881X_DIGITAL_BASE + 0x008C)
+#define WSA881X_OTP_REG_13			(WSA881X_DIGITAL_BASE + 0x008D)
+#define WSA881X_OTP_REG_14			(WSA881X_DIGITAL_BASE + 0x008E)
+#define WSA881X_OTP_REG_15			(WSA881X_DIGITAL_BASE + 0x008F)
+#define WSA881X_OTP_REG_16			(WSA881X_DIGITAL_BASE + 0x0090)
+#define WSA881X_OTP_REG_17			(WSA881X_DIGITAL_BASE + 0x0091)
+#define WSA881X_OTP_REG_18			(WSA881X_DIGITAL_BASE + 0x0092)
+#define WSA881X_OTP_REG_19			(WSA881X_DIGITAL_BASE + 0x0093)
+#define WSA881X_OTP_REG_20			(WSA881X_DIGITAL_BASE + 0x0094)
+#define WSA881X_OTP_REG_21			(WSA881X_DIGITAL_BASE + 0x0095)
+#define WSA881X_OTP_REG_22			(WSA881X_DIGITAL_BASE + 0x0096)
+#define WSA881X_OTP_REG_23			(WSA881X_DIGITAL_BASE + 0x0097)
+#define WSA881X_OTP_REG_24			(WSA881X_DIGITAL_BASE + 0x0098)
+#define WSA881X_OTP_REG_25			(WSA881X_DIGITAL_BASE + 0x0099)
+#define WSA881X_OTP_REG_26			(WSA881X_DIGITAL_BASE + 0x009A)
+#define WSA881X_OTP_REG_27			(WSA881X_DIGITAL_BASE + 0x009B)
+#define WSA881X_OTP_REG_28			(WSA881X_DIGITAL_BASE + 0x009C)
+#define WSA881X_OTP_REG_29			(WSA881X_DIGITAL_BASE + 0x009D)
+#define WSA881X_OTP_REG_30			(WSA881X_DIGITAL_BASE + 0x009E)
+#define WSA881X_OTP_REG_31			(WSA881X_DIGITAL_BASE + 0x009F)
+#define WSA881X_OTP_REG_63			(WSA881X_DIGITAL_BASE + 0x00BF)
+
+/* Analog Register address space */
+#define WSA881X_BIAS_REF_CTRL			(WSA881X_ANALOG_BASE + 0x0000)
+#define WSA881X_BIAS_TEST			(WSA881X_ANALOG_BASE + 0x0001)
+#define WSA881X_BIAS_BIAS			(WSA881X_ANALOG_BASE + 0x0002)
+#define WSA881X_TEMP_OP				(WSA881X_ANALOG_BASE + 0x0003)
+#define WSA881X_TEMP_IREF_CTRL			(WSA881X_ANALOG_BASE + 0x0004)
+#define WSA881X_TEMP_ISENS_CTRL			(WSA881X_ANALOG_BASE + 0x0005)
+#define WSA881X_TEMP_CLK_CTRL			(WSA881X_ANALOG_BASE + 0x0006)
+#define WSA881X_TEMP_TEST			(WSA881X_ANALOG_BASE + 0x0007)
+#define WSA881X_TEMP_BIAS			(WSA881X_ANALOG_BASE + 0x0008)
+#define WSA881X_TEMP_ADC_CTRL			(WSA881X_ANALOG_BASE + 0x0009)
+#define WSA881X_TEMP_DOUT_MSB			(WSA881X_ANALOG_BASE + 0x000A)
+#define WSA881X_TEMP_DOUT_LSB			(WSA881X_ANALOG_BASE + 0x000B)
+#define WSA881X_ADC_EN_MODU_V			(WSA881X_ANALOG_BASE + 0x0010)
+#define WSA881X_ADC_EN_MODU_I			(WSA881X_ANALOG_BASE + 0x0011)
+#define WSA881X_ADC_EN_DET_TEST_V		(WSA881X_ANALOG_BASE + 0x0012)
+#define WSA881X_ADC_EN_DET_TEST_I		(WSA881X_ANALOG_BASE + 0x0013)
+#define WSA881X_ADC_SEL_IBIAS			(WSA881X_ANALOG_BASE + 0x0014)
+#define WSA881X_ADC_EN_SEL_IBAIS		(WSA881X_ANALOG_BASE + 0x0015)
+#define WSA881X_SPKR_DRV_EN			(WSA881X_ANALOG_BASE + 0x001A)
+#define WSA881X_SPKR_DRV_GAIN			(WSA881X_ANALOG_BASE + 0x001B)
+#define WSA881X_PA_GAIN_SEL_MASK		BIT(3)
+#define WSA881X_PA_GAIN_SEL_REG			BIT(3)
+#define WSA881X_PA_GAIN_SEL_DRE			0
+#define WSA881X_SPKR_PAG_GAIN_MASK		GENMASK(7, 4)
+#define WSA881X_SPKR_DAC_CTL			(WSA881X_ANALOG_BASE + 0x001C)
+#define WSA881X_SPKR_DRV_DBG			(WSA881X_ANALOG_BASE + 0x001D)
+#define WSA881X_SPKR_PWRSTG_DBG			(WSA881X_ANALOG_BASE + 0x001E)
+#define WSA881X_SPKR_OCP_CTL			(WSA881X_ANALOG_BASE + 0x001F)
+#define WSA881X_SPKR_OCP_MASK			GENMASK(7, 6)
+#define WSA881X_SPKR_OCP_EN			BIT(7)
+#define WSA881X_SPKR_OCP_HOLD			BIT(6)
+#define WSA881X_SPKR_CLIP_CTL			(WSA881X_ANALOG_BASE + 0x0020)
+#define WSA881X_SPKR_BBM_CTL			(WSA881X_ANALOG_BASE + 0x0021)
+#define WSA881X_SPKR_MISC_CTL1			(WSA881X_ANALOG_BASE + 0x0022)
+#define WSA881X_SPKR_MISC_CTL2			(WSA881X_ANALOG_BASE + 0x0023)
+#define WSA881X_SPKR_BIAS_INT			(WSA881X_ANALOG_BASE + 0x0024)
+#define WSA881X_SPKR_PA_INT			(WSA881X_ANALOG_BASE + 0x0025)
+#define WSA881X_SPKR_BIAS_CAL			(WSA881X_ANALOG_BASE + 0x0026)
+#define WSA881X_SPKR_BIAS_PSRR			(WSA881X_ANALOG_BASE + 0x0027)
+#define WSA881X_SPKR_STATUS1			(WSA881X_ANALOG_BASE + 0x0028)
+#define WSA881X_SPKR_STATUS2			(WSA881X_ANALOG_BASE + 0x0029)
+#define WSA881X_BOOST_EN_CTL			(WSA881X_ANALOG_BASE + 0x002A)
+#define WSA881X_BOOST_EN_MASK			BIT(7)
+#define WSA881X_BOOST_EN			BIT(7)
+#define WSA881X_BOOST_CURRENT_LIMIT		(WSA881X_ANALOG_BASE + 0x002B)
+#define WSA881X_BOOST_PS_CTL			(WSA881X_ANALOG_BASE + 0x002C)
+#define WSA881X_BOOST_PRESET_OUT1		(WSA881X_ANALOG_BASE + 0x002D)
+#define WSA881X_BOOST_PRESET_OUT2		(WSA881X_ANALOG_BASE + 0x002E)
+#define WSA881X_BOOST_FORCE_OUT			(WSA881X_ANALOG_BASE + 0x002F)
+#define WSA881X_BOOST_LDO_PROG			(WSA881X_ANALOG_BASE + 0x0030)
+#define WSA881X_BOOST_SLOPE_COMP_ISENSE_FB	(WSA881X_ANALOG_BASE + 0x0031)
+#define WSA881X_BOOST_RON_CTL			(WSA881X_ANALOG_BASE + 0x0032)
+#define WSA881X_BOOST_LOOP_STABILITY		(WSA881X_ANALOG_BASE + 0x0033)
+#define WSA881X_BOOST_ZX_CTL			(WSA881X_ANALOG_BASE + 0x0034)
+#define WSA881X_BOOST_START_CTL			(WSA881X_ANALOG_BASE + 0x0035)
+#define WSA881X_BOOST_MISC1_CTL			(WSA881X_ANALOG_BASE + 0x0036)
+#define WSA881X_BOOST_MISC2_CTL			(WSA881X_ANALOG_BASE + 0x0037)
+#define WSA881X_BOOST_MISC3_CTL			(WSA881X_ANALOG_BASE + 0x0038)
+#define WSA881X_BOOST_ATEST_CTL			(WSA881X_ANALOG_BASE + 0x0039)
+#define WSA881X_SPKR_PROT_FE_GAIN		(WSA881X_ANALOG_BASE + 0x003A)
+#define WSA881X_SPKR_PROT_FE_CM_LDO_SET		(WSA881X_ANALOG_BASE + 0x003B)
+#define WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1	(WSA881X_ANALOG_BASE + 0x003C)
+#define WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2	(WSA881X_ANALOG_BASE + 0x003D)
+#define WSA881X_SPKR_PROT_ATEST1		(WSA881X_ANALOG_BASE + 0x003E)
+#define WSA881X_SPKR_PROT_ATEST2		(WSA881X_ANALOG_BASE + 0x003F)
+#define WSA881X_SPKR_PROT_FE_VSENSE_VCM		(WSA881X_ANALOG_BASE + 0x0040)
+#define WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1	(WSA881X_ANALOG_BASE + 0x0041)
+#define WSA881X_BONGO_RESRV_REG1		(WSA881X_ANALOG_BASE + 0x0042)
+#define WSA881X_BONGO_RESRV_REG2		(WSA881X_ANALOG_BASE + 0x0043)
+#define WSA881X_SPKR_PROT_SAR			(WSA881X_ANALOG_BASE + 0x0044)
+#define WSA881X_SPKR_STATUS3			(WSA881X_ANALOG_BASE + 0x0045)
+
+#define SWRS_SCP_FRAME_CTRL_BANK(m)		(0x60 + 0x10 * (m))
+#define SWRS_SCP_HOST_CLK_DIV2_CTL_BANK(m)	(0xE0 + 0x10 * (m))
+#define SWR_SLV_MAX_REG_ADDR	0x390
+#define SWR_SLV_START_REG_ADDR	0x40
+#define SWR_SLV_MAX_BUF_LEN	20
+#define BYTES_PER_LINE		12
+#define SWR_SLV_RD_BUF_LEN	8
+#define SWR_SLV_WR_BUF_LEN	32
+#define SWR_SLV_MAX_DEVICES	2
+#define WSA881X_MAX_SWR_PORTS   4
+#define WSA881X_VERSION_ENTRY_SIZE 27
+#define WSA881X_OCP_CTL_TIMER_SEC 2
+#define WSA881X_OCP_CTL_TEMP_CELSIUS 25
+#define WSA881X_OCP_CTL_POLL_TIMER_SEC 60
+#define WSA881X_PROBE_TIMEOUT 1000
+
+#define WSA881X_PA_GAIN_TLV(xname, reg, shift, max, invert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		 SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
+	.put = wsa881x_put_pa_gain, \
+	.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
+
+static struct reg_default wsa881x_defaults[] = {
+	{ WSA881X_CHIP_ID0, 0x00 },
+	{ WSA881X_CHIP_ID1, 0x00 },
+	{ WSA881X_CHIP_ID2, 0x00 },
+	{ WSA881X_CHIP_ID3, 0x02 },
+	{ WSA881X_BUS_ID, 0x00 },
+	{ WSA881X_CDC_RST_CTL, 0x00 },
+	{ WSA881X_CDC_TOP_CLK_CTL, 0x03 },
+	{ WSA881X_CDC_ANA_CLK_CTL, 0x00 },
+	{ WSA881X_CDC_DIG_CLK_CTL, 0x00 },
+	{ WSA881X_CLOCK_CONFIG, 0x00 },
+	{ WSA881X_ANA_CTL, 0x08 },
+	{ WSA881X_SWR_RESET_EN, 0x00 },
+	{ WSA881X_TEMP_DETECT_CTL, 0x01 },
+	{ WSA881X_TEMP_MSB, 0x00 },
+	{ WSA881X_TEMP_LSB, 0x00 },
+	{ WSA881X_TEMP_CONFIG0, 0x00 },
+	{ WSA881X_TEMP_CONFIG1, 0x00 },
+	{ WSA881X_CDC_CLIP_CTL, 0x03 },
+	{ WSA881X_SDM_PDM9_LSB, 0x00 },
+	{ WSA881X_SDM_PDM9_MSB, 0x00 },
+	{ WSA881X_CDC_RX_CTL, 0x7E },
+	{ WSA881X_DEM_BYPASS_DATA0, 0x00 },
+	{ WSA881X_DEM_BYPASS_DATA1, 0x00 },
+	{ WSA881X_DEM_BYPASS_DATA2, 0x00 },
+	{ WSA881X_DEM_BYPASS_DATA3, 0x00 },
+	{ WSA881X_OTP_CTRL0, 0x00 },
+	{ WSA881X_OTP_CTRL1, 0x00 },
+	{ WSA881X_HDRIVE_CTL_GROUP1, 0x00 },
+	{ WSA881X_INTR_MODE, 0x00 },
+	{ WSA881X_INTR_STATUS, 0x00 },
+	{ WSA881X_INTR_CLEAR, 0x00 },
+	{ WSA881X_INTR_LEVEL, 0x00 },
+	{ WSA881X_INTR_SET, 0x00 },
+	{ WSA881X_INTR_TEST, 0x00 },
+	{ WSA881X_PDM_TEST_MODE, 0x00 },
+	{ WSA881X_ATE_TEST_MODE, 0x00 },
+	{ WSA881X_PIN_CTL_MODE, 0x00 },
+	{ WSA881X_PIN_CTL_OE, 0x00 },
+	{ WSA881X_PIN_WDATA_IOPAD, 0x00 },
+	{ WSA881X_PIN_STATUS, 0x00 },
+	{ WSA881X_DIG_DEBUG_MODE, 0x00 },
+	{ WSA881X_DIG_DEBUG_SEL, 0x00 },
+	{ WSA881X_DIG_DEBUG_EN, 0x00 },
+	{ WSA881X_SWR_HM_TEST1, 0x08 },
+	{ WSA881X_SWR_HM_TEST2, 0x00 },
+	{ WSA881X_TEMP_DETECT_DBG_CTL, 0x00 },
+	{ WSA881X_TEMP_DEBUG_MSB, 0x00 },
+	{ WSA881X_TEMP_DEBUG_LSB, 0x00 },
+	{ WSA881X_SAMPLE_EDGE_SEL, 0x0C },
+	{ WSA881X_SPARE_0, 0x00 },
+	{ WSA881X_SPARE_1, 0x00 },
+	{ WSA881X_SPARE_2, 0x00 },
+	{ WSA881X_OTP_REG_0, 0x01 },
+	{ WSA881X_OTP_REG_1, 0xFF },
+	{ WSA881X_OTP_REG_2, 0xC0 },
+	{ WSA881X_OTP_REG_3, 0xFF },
+	{ WSA881X_OTP_REG_4, 0xC0 },
+	{ WSA881X_OTP_REG_5, 0xFF },
+	{ WSA881X_OTP_REG_6, 0xFF },
+	{ WSA881X_OTP_REG_7, 0xFF },
+	{ WSA881X_OTP_REG_8, 0xFF },
+	{ WSA881X_OTP_REG_9, 0xFF },
+	{ WSA881X_OTP_REG_10, 0xFF },
+	{ WSA881X_OTP_REG_11, 0xFF },
+	{ WSA881X_OTP_REG_12, 0xFF },
+	{ WSA881X_OTP_REG_13, 0xFF },
+	{ WSA881X_OTP_REG_14, 0xFF },
+	{ WSA881X_OTP_REG_15, 0xFF },
+	{ WSA881X_OTP_REG_16, 0xFF },
+	{ WSA881X_OTP_REG_17, 0xFF },
+	{ WSA881X_OTP_REG_18, 0xFF },
+	{ WSA881X_OTP_REG_19, 0xFF },
+	{ WSA881X_OTP_REG_20, 0xFF },
+	{ WSA881X_OTP_REG_21, 0xFF },
+	{ WSA881X_OTP_REG_22, 0xFF },
+	{ WSA881X_OTP_REG_23, 0xFF },
+	{ WSA881X_OTP_REG_24, 0x03 },
+	{ WSA881X_OTP_REG_25, 0x01 },
+	{ WSA881X_OTP_REG_26, 0x03 },
+	{ WSA881X_OTP_REG_27, 0x11 },
+	{ WSA881X_OTP_REG_63, 0x40 },
+	/* WSA881x Analog registers */
+	{ WSA881X_BIAS_REF_CTRL, 0x6C },
+	{ WSA881X_BIAS_TEST, 0x16 },
+	{ WSA881X_BIAS_BIAS, 0xF0 },
+	{ WSA881X_TEMP_OP, 0x00 },
+	{ WSA881X_TEMP_IREF_CTRL, 0x56 },
+	{ WSA881X_TEMP_ISENS_CTRL, 0x47 },
+	{ WSA881X_TEMP_CLK_CTRL, 0x87 },
+	{ WSA881X_TEMP_TEST, 0x00 },
+	{ WSA881X_TEMP_BIAS, 0x51 },
+	{ WSA881X_TEMP_DOUT_MSB, 0x00 },
+	{ WSA881X_TEMP_DOUT_LSB, 0x00 },
+	{ WSA881X_ADC_EN_MODU_V, 0x00 },
+	{ WSA881X_ADC_EN_MODU_I, 0x00 },
+	{ WSA881X_ADC_EN_DET_TEST_V, 0x00 },
+	{ WSA881X_ADC_EN_DET_TEST_I, 0x00 },
+	{ WSA881X_ADC_EN_SEL_IBAIS, 0x10 },
+	{ WSA881X_SPKR_DRV_EN, 0x74 },
+	{ WSA881X_SPKR_DRV_DBG, 0x15 },
+	{ WSA881X_SPKR_PWRSTG_DBG, 0x00 },
+	{ WSA881X_SPKR_OCP_CTL, 0xD4 },
+	{ WSA881X_SPKR_CLIP_CTL, 0x90 },
+	{ WSA881X_SPKR_PA_INT, 0x54 },
+	{ WSA881X_SPKR_BIAS_CAL, 0xAC },
+	{ WSA881X_SPKR_STATUS1, 0x00 },
+	{ WSA881X_SPKR_STATUS2, 0x00 },
+	{ WSA881X_BOOST_EN_CTL, 0x18 },
+	{ WSA881X_BOOST_CURRENT_LIMIT, 0x7A },
+	{ WSA881X_BOOST_PRESET_OUT2, 0x70 },
+	{ WSA881X_BOOST_FORCE_OUT, 0x0E },
+	{ WSA881X_BOOST_LDO_PROG, 0x16 },
+	{ WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, 0x71 },
+	{ WSA881X_BOOST_RON_CTL, 0x0F },
+	{ WSA881X_BOOST_ZX_CTL, 0x34 },
+	{ WSA881X_BOOST_START_CTL, 0x23 },
+	{ WSA881X_BOOST_MISC1_CTL, 0x80 },
+	{ WSA881X_BOOST_MISC2_CTL, 0x00 },
+	{ WSA881X_BOOST_MISC3_CTL, 0x00 },
+	{ WSA881X_BOOST_ATEST_CTL, 0x00 },
+	{ WSA881X_SPKR_PROT_FE_GAIN, 0x46 },
+	{ WSA881X_SPKR_PROT_FE_CM_LDO_SET, 0x3B },
+	{ WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1, 0x8D },
+	{ WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2, 0x8D },
+	{ WSA881X_SPKR_PROT_ATEST1, 0x01 },
+	{ WSA881X_SPKR_PROT_FE_VSENSE_VCM, 0x8D },
+	{ WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1, 0x4D },
+	{ WSA881X_SPKR_PROT_SAR, 0x00 },
+	{ WSA881X_SPKR_STATUS3, 0x00 },
+};
+
+static const struct reg_sequence wsa881x_pre_pmu_pa_2_0[] = {
+	{ WSA881X_SPKR_DRV_GAIN, 0x41, 0 },
+	{ WSA881X_SPKR_MISC_CTL1, 0x87, 0 },
+};
+
+static const struct reg_sequence wsa881x_vi_txfe_en_2_0[] = {
+	{ WSA881X_SPKR_PROT_FE_VSENSE_VCM, 0x85, 0 },
+	{ WSA881X_SPKR_PROT_ATEST2, 0x0A, 0 },
+	{ WSA881X_SPKR_PROT_FE_GAIN, 0x47, 0 },
+};
+
+/* Default register reset values for WSA881x rev 2.0 */
+static struct reg_sequence wsa881x_rev_2_0[] = {
+	{ WSA881X_RESET_CTL, 0x00, 0x00 },
+	{ WSA881X_TADC_VALUE_CTL, 0x01, 0x00 },
+	{ WSA881X_INTR_MASK, 0x1B, 0x00 },
+	{ WSA881X_IOPAD_CTL, 0x00, 0x00 },
+	{ WSA881X_OTP_REG_28, 0x3F, 0x00 },
+	{ WSA881X_OTP_REG_29, 0x3F, 0x00 },
+	{ WSA881X_OTP_REG_30, 0x01, 0x00 },
+	{ WSA881X_OTP_REG_31, 0x01, 0x00 },
+	{ WSA881X_TEMP_ADC_CTRL, 0x03, 0x00 },
+	{ WSA881X_ADC_SEL_IBIAS, 0x45, 0x00 },
+	{ WSA881X_SPKR_DRV_GAIN, 0xC1, 0x00 },
+	{ WSA881X_SPKR_DAC_CTL, 0x42, 0x00 },
+	{ WSA881X_SPKR_BBM_CTL, 0x02, 0x00 },
+	{ WSA881X_SPKR_MISC_CTL1, 0x40, 0x00 },
+	{ WSA881X_SPKR_MISC_CTL2, 0x07, 0x00 },
+	{ WSA881X_SPKR_BIAS_INT, 0x5F, 0x00 },
+	{ WSA881X_SPKR_BIAS_PSRR, 0x44, 0x00 },
+	{ WSA881X_BOOST_PS_CTL, 0xA0, 0x00 },
+	{ WSA881X_BOOST_PRESET_OUT1, 0xB7, 0x00 },
+	{ WSA881X_BOOST_LOOP_STABILITY, 0x8D, 0x00 },
+	{ WSA881X_SPKR_PROT_ATEST2, 0x02, 0x00 },
+	{ WSA881X_BONGO_RESRV_REG1, 0x5E, 0x00 },
+	{ WSA881X_BONGO_RESRV_REG2, 0x07, 0x00 },
+};
+
+enum wsa_port_ids {
+	WSA881X_PORT_DAC,
+	WSA881X_PORT_COMP,
+	WSA881X_PORT_BOOST,
+	WSA881X_PORT_VISENSE,
+};
+
+/* 4 ports */
+static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
+	{
+		/* DAC */
+		.num = 1,
+		.type = SDW_DPN_SIMPLE,
+		.min_ch = 1,
+		.max_ch = 1,
+		.simple_ch_prep_sm = true,
+		.read_only_wordlength = true,
+	}, {
+		/* COMP */
+		.num = 2,
+		.type = SDW_DPN_SIMPLE,
+		.min_ch = 1,
+		.max_ch = 1,
+		.simple_ch_prep_sm = true,
+		.read_only_wordlength = true,
+	}, {
+		/* BOOST */
+		.num = 3,
+		.type = SDW_DPN_SIMPLE,
+		.min_ch = 1,
+		.max_ch = 1,
+		.simple_ch_prep_sm = true,
+		.read_only_wordlength = true,
+	}, {
+		/* VISENSE */
+		.num = 4,
+		.type = SDW_DPN_SIMPLE,
+		.min_ch = 1,
+		.max_ch = 1,
+		.simple_ch_prep_sm = true,
+		.read_only_wordlength = true,
+	}
+};
+
+static const struct sdw_port_config wsa881x_pconfig[WSA881X_MAX_SWR_PORTS] = {
+	{
+		.num = 1,
+		.ch_mask = 0x1,
+	}, {
+		.num = 2,
+		.ch_mask = 0xf,
+	}, {
+		.num = 3,
+		.ch_mask = 0x3,
+	}, {	/* IV feedback */
+		.num = 4,
+		.ch_mask = 0x3,
+	},
+};
+
+static bool wsa881x_readable_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case WSA881X_CHIP_ID0:
+	case WSA881X_CHIP_ID1:
+	case WSA881X_CHIP_ID2:
+	case WSA881X_CHIP_ID3:
+	case WSA881X_BUS_ID:
+	case WSA881X_CDC_RST_CTL:
+	case WSA881X_CDC_TOP_CLK_CTL:
+	case WSA881X_CDC_ANA_CLK_CTL:
+	case WSA881X_CDC_DIG_CLK_CTL:
+	case WSA881X_CLOCK_CONFIG:
+	case WSA881X_ANA_CTL:
+	case WSA881X_SWR_RESET_EN:
+	case WSA881X_RESET_CTL:
+	case WSA881X_TADC_VALUE_CTL:
+	case WSA881X_TEMP_DETECT_CTL:
+	case WSA881X_TEMP_MSB:
+	case WSA881X_TEMP_LSB:
+	case WSA881X_TEMP_CONFIG0:
+	case WSA881X_TEMP_CONFIG1:
+	case WSA881X_CDC_CLIP_CTL:
+	case WSA881X_SDM_PDM9_LSB:
+	case WSA881X_SDM_PDM9_MSB:
+	case WSA881X_CDC_RX_CTL:
+	case WSA881X_DEM_BYPASS_DATA0:
+	case WSA881X_DEM_BYPASS_DATA1:
+	case WSA881X_DEM_BYPASS_DATA2:
+	case WSA881X_DEM_BYPASS_DATA3:
+	case WSA881X_OTP_CTRL0:
+	case WSA881X_OTP_CTRL1:
+	case WSA881X_HDRIVE_CTL_GROUP1:
+	case WSA881X_INTR_MODE:
+	case WSA881X_INTR_MASK:
+	case WSA881X_INTR_STATUS:
+	case WSA881X_INTR_CLEAR:
+	case WSA881X_INTR_LEVEL:
+	case WSA881X_INTR_SET:
+	case WSA881X_INTR_TEST:
+	case WSA881X_PDM_TEST_MODE:
+	case WSA881X_ATE_TEST_MODE:
+	case WSA881X_PIN_CTL_MODE:
+	case WSA881X_PIN_CTL_OE:
+	case WSA881X_PIN_WDATA_IOPAD:
+	case WSA881X_PIN_STATUS:
+	case WSA881X_DIG_DEBUG_MODE:
+	case WSA881X_DIG_DEBUG_SEL:
+	case WSA881X_DIG_DEBUG_EN:
+	case WSA881X_SWR_HM_TEST1:
+	case WSA881X_SWR_HM_TEST2:
+	case WSA881X_TEMP_DETECT_DBG_CTL:
+	case WSA881X_TEMP_DEBUG_MSB:
+	case WSA881X_TEMP_DEBUG_LSB:
+	case WSA881X_SAMPLE_EDGE_SEL:
+	case WSA881X_IOPAD_CTL:
+	case WSA881X_SPARE_0:
+	case WSA881X_SPARE_1:
+	case WSA881X_SPARE_2:
+	case WSA881X_OTP_REG_0:
+	case WSA881X_OTP_REG_1:
+	case WSA881X_OTP_REG_2:
+	case WSA881X_OTP_REG_3:
+	case WSA881X_OTP_REG_4:
+	case WSA881X_OTP_REG_5:
+	case WSA881X_OTP_REG_6:
+	case WSA881X_OTP_REG_7:
+	case WSA881X_OTP_REG_8:
+	case WSA881X_OTP_REG_9:
+	case WSA881X_OTP_REG_10:
+	case WSA881X_OTP_REG_11:
+	case WSA881X_OTP_REG_12:
+	case WSA881X_OTP_REG_13:
+	case WSA881X_OTP_REG_14:
+	case WSA881X_OTP_REG_15:
+	case WSA881X_OTP_REG_16:
+	case WSA881X_OTP_REG_17:
+	case WSA881X_OTP_REG_18:
+	case WSA881X_OTP_REG_19:
+	case WSA881X_OTP_REG_20:
+	case WSA881X_OTP_REG_21:
+	case WSA881X_OTP_REG_22:
+	case WSA881X_OTP_REG_23:
+	case WSA881X_OTP_REG_24:
+	case WSA881X_OTP_REG_25:
+	case WSA881X_OTP_REG_26:
+	case WSA881X_OTP_REG_27:
+	case WSA881X_OTP_REG_28:
+	case WSA881X_OTP_REG_29:
+	case WSA881X_OTP_REG_30:
+	case WSA881X_OTP_REG_31:
+	case WSA881X_OTP_REG_63:
+	case WSA881X_BIAS_REF_CTRL:
+	case WSA881X_BIAS_TEST:
+	case WSA881X_BIAS_BIAS:
+	case WSA881X_TEMP_OP:
+	case WSA881X_TEMP_IREF_CTRL:
+	case WSA881X_TEMP_ISENS_CTRL:
+	case WSA881X_TEMP_CLK_CTRL:
+	case WSA881X_TEMP_TEST:
+	case WSA881X_TEMP_BIAS:
+	case WSA881X_TEMP_ADC_CTRL:
+	case WSA881X_TEMP_DOUT_MSB:
+	case WSA881X_TEMP_DOUT_LSB:
+	case WSA881X_ADC_EN_MODU_V:
+	case WSA881X_ADC_EN_MODU_I:
+	case WSA881X_ADC_EN_DET_TEST_V:
+	case WSA881X_ADC_EN_DET_TEST_I:
+	case WSA881X_ADC_SEL_IBIAS:
+	case WSA881X_ADC_EN_SEL_IBAIS:
+	case WSA881X_SPKR_DRV_EN:
+	case WSA881X_SPKR_DRV_GAIN:
+	case WSA881X_SPKR_DAC_CTL:
+	case WSA881X_SPKR_DRV_DBG:
+	case WSA881X_SPKR_PWRSTG_DBG:
+	case WSA881X_SPKR_OCP_CTL:
+	case WSA881X_SPKR_CLIP_CTL:
+	case WSA881X_SPKR_BBM_CTL:
+	case WSA881X_SPKR_MISC_CTL1:
+	case WSA881X_SPKR_MISC_CTL2:
+	case WSA881X_SPKR_BIAS_INT:
+	case WSA881X_SPKR_PA_INT:
+	case WSA881X_SPKR_BIAS_CAL:
+	case WSA881X_SPKR_BIAS_PSRR:
+	case WSA881X_SPKR_STATUS1:
+	case WSA881X_SPKR_STATUS2:
+	case WSA881X_BOOST_EN_CTL:
+	case WSA881X_BOOST_CURRENT_LIMIT:
+	case WSA881X_BOOST_PS_CTL:
+	case WSA881X_BOOST_PRESET_OUT1:
+	case WSA881X_BOOST_PRESET_OUT2:
+	case WSA881X_BOOST_FORCE_OUT:
+	case WSA881X_BOOST_LDO_PROG:
+	case WSA881X_BOOST_SLOPE_COMP_ISENSE_FB:
+	case WSA881X_BOOST_RON_CTL:
+	case WSA881X_BOOST_LOOP_STABILITY:
+	case WSA881X_BOOST_ZX_CTL:
+	case WSA881X_BOOST_START_CTL:
+	case WSA881X_BOOST_MISC1_CTL:
+	case WSA881X_BOOST_MISC2_CTL:
+	case WSA881X_BOOST_MISC3_CTL:
+	case WSA881X_BOOST_ATEST_CTL:
+	case WSA881X_SPKR_PROT_FE_GAIN:
+	case WSA881X_SPKR_PROT_FE_CM_LDO_SET:
+	case WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET1:
+	case WSA881X_SPKR_PROT_FE_ISENSE_BIAS_SET2:
+	case WSA881X_SPKR_PROT_ATEST1:
+	case WSA881X_SPKR_PROT_ATEST2:
+	case WSA881X_SPKR_PROT_FE_VSENSE_VCM:
+	case WSA881X_SPKR_PROT_FE_VSENSE_BIAS_SET1:
+	case WSA881X_BONGO_RESRV_REG1:
+	case WSA881X_BONGO_RESRV_REG2:
+	case WSA881X_SPKR_PROT_SAR:
+	case WSA881X_SPKR_STATUS3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool wsa881x_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case WSA881X_CHIP_ID0:
+	case WSA881X_CHIP_ID1:
+	case WSA881X_CHIP_ID2:
+	case WSA881X_CHIP_ID3:
+	case WSA881X_BUS_ID:
+	case WSA881X_TEMP_MSB:
+	case WSA881X_TEMP_LSB:
+	case WSA881X_SDM_PDM9_LSB:
+	case WSA881X_SDM_PDM9_MSB:
+	case WSA881X_OTP_CTRL1:
+	case WSA881X_INTR_STATUS:
+	case WSA881X_ATE_TEST_MODE:
+	case WSA881X_PIN_STATUS:
+	case WSA881X_SWR_HM_TEST2:
+	case WSA881X_SPKR_STATUS1:
+	case WSA881X_SPKR_STATUS2:
+	case WSA881X_SPKR_STATUS3:
+	case WSA881X_OTP_REG_0:
+	case WSA881X_OTP_REG_1:
+	case WSA881X_OTP_REG_2:
+	case WSA881X_OTP_REG_3:
+	case WSA881X_OTP_REG_4:
+	case WSA881X_OTP_REG_5:
+	case WSA881X_OTP_REG_31:
+	case WSA881X_TEMP_DOUT_MSB:
+	case WSA881X_TEMP_DOUT_LSB:
+	case WSA881X_TEMP_OP:
+	case WSA881X_SPKR_PROT_SAR:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config wsa881x_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 8,
+	.cache_type = REGCACHE_MAPLE,
+	.reg_defaults = wsa881x_defaults,
+	.max_register = WSA881X_SPKR_STATUS3,
+	.num_reg_defaults = ARRAY_SIZE(wsa881x_defaults),
+	.volatile_reg = wsa881x_volatile_register,
+	.readable_reg = wsa881x_readable_register,
+	.reg_format_endian = REGMAP_ENDIAN_NATIVE,
+	.val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+
+enum {
+	G_18DB = 0,
+	G_16P5DB,
+	G_15DB,
+	G_13P5DB,
+	G_12DB,
+	G_10P5DB,
+	G_9DB,
+	G_7P5DB,
+	G_6DB,
+	G_4P5DB,
+	G_3DB,
+	G_1P5DB,
+	G_0DB,
+};
+
+/*
+ * Private data Structure for wsa881x. All parameters related to
+ * WSA881X codec needs to be defined here.
+ */
+struct wsa881x_priv {
+	struct regmap *regmap;
+	struct device *dev;
+	struct sdw_slave *slave;
+	struct sdw_stream_config sconfig;
+	struct sdw_stream_runtime *sruntime;
+	struct sdw_port_config port_config[WSA881X_MAX_SWR_PORTS];
+	struct gpio_desc *sd_n;
+	/*
+	 * Logical state for SD_N GPIO: high for shutdown, low for enable.
+	 * For backwards compatibility.
+	 */
+	unsigned int sd_n_val;
+	int version;
+	int active_ports;
+	bool port_prepared[WSA881X_MAX_SWR_PORTS];
+	bool port_enable[WSA881X_MAX_SWR_PORTS];
+};
+
+static void wsa881x_init(struct wsa881x_priv *wsa881x)
+{
+	struct regmap *rm = wsa881x->regmap;
+	unsigned int val = 0;
+
+	regmap_read(rm, WSA881X_CHIP_ID1, &wsa881x->version);
+	regmap_register_patch(wsa881x->regmap, wsa881x_rev_2_0,
+			      ARRAY_SIZE(wsa881x_rev_2_0));
+
+	/* Enable software reset output from soundwire slave */
+	regmap_update_bits(rm, WSA881X_SWR_RESET_EN, 0x07, 0x07);
+
+	/* Bring out of analog reset */
+	regmap_update_bits(rm, WSA881X_CDC_RST_CTL, 0x02, 0x02);
+
+	/* Bring out of digital reset */
+	regmap_update_bits(rm, WSA881X_CDC_RST_CTL, 0x01, 0x01);
+	regmap_update_bits(rm, WSA881X_CLOCK_CONFIG, 0x10, 0x10);
+	regmap_update_bits(rm, WSA881X_SPKR_OCP_CTL, 0x02, 0x02);
+	regmap_update_bits(rm, WSA881X_SPKR_MISC_CTL1, 0xC0, 0x80);
+	regmap_update_bits(rm, WSA881X_SPKR_MISC_CTL1, 0x06, 0x06);
+	regmap_update_bits(rm, WSA881X_SPKR_BIAS_INT, 0xFF, 0x00);
+	regmap_update_bits(rm, WSA881X_SPKR_PA_INT, 0xF0, 0x40);
+	regmap_update_bits(rm, WSA881X_SPKR_PA_INT, 0x0E, 0x0E);
+	regmap_update_bits(rm, WSA881X_BOOST_LOOP_STABILITY, 0x03, 0x03);
+	regmap_update_bits(rm, WSA881X_BOOST_MISC2_CTL, 0xFF, 0x14);
+	regmap_update_bits(rm, WSA881X_BOOST_START_CTL, 0x80, 0x80);
+	regmap_update_bits(rm, WSA881X_BOOST_START_CTL, 0x03, 0x00);
+	regmap_update_bits(rm, WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, 0x0C, 0x04);
+	regmap_update_bits(rm, WSA881X_BOOST_SLOPE_COMP_ISENSE_FB, 0x03, 0x00);
+
+	regmap_read(rm, WSA881X_OTP_REG_0, &val);
+	if (val)
+		regmap_update_bits(rm, WSA881X_BOOST_PRESET_OUT1, 0xF0, 0x70);
+
+	regmap_update_bits(rm, WSA881X_BOOST_PRESET_OUT2, 0xF0, 0x30);
+	regmap_update_bits(rm, WSA881X_SPKR_DRV_EN, 0x08, 0x08);
+	regmap_update_bits(rm, WSA881X_BOOST_CURRENT_LIMIT, 0x0F, 0x08);
+	regmap_update_bits(rm, WSA881X_SPKR_OCP_CTL, 0x30, 0x30);
+	regmap_update_bits(rm, WSA881X_SPKR_OCP_CTL, 0x0C, 0x00);
+	regmap_update_bits(rm, WSA881X_OTP_REG_28, 0x3F, 0x3A);
+	regmap_update_bits(rm, WSA881X_BONGO_RESRV_REG1, 0xFF, 0xB2);
+	regmap_update_bits(rm, WSA881X_BONGO_RESRV_REG2, 0xFF, 0x05);
+}
+
+static int wsa881x_component_probe(struct snd_soc_component *comp)
+{
+	struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp);
+
+	snd_soc_component_init_regmap(comp, wsa881x->regmap);
+
+	return 0;
+}
+
+static int wsa881x_put_pa_gain(struct snd_kcontrol *kc,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kc);
+	struct soc_mixer_control *mc =
+			(struct soc_mixer_control *)kc->private_value;
+	int max = mc->max;
+	unsigned int mask = (1 << fls(max)) - 1;
+	int val, ret, min_gain, max_gain;
+
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0 && ret != -EACCES)
+		return ret;
+
+	max_gain = (max - ucontrol->value.integer.value[0]) & mask;
+	/*
+	 * Gain has to set incrementally in 4 steps
+	 * as per HW sequence
+	 */
+	if (max_gain > G_4P5DB)
+		min_gain = G_0DB;
+	else
+		min_gain = max_gain + 3;
+	/*
+	 * 1ms delay is needed before change in gain
+	 * as per HW requirement.
+	 */
+	usleep_range(1000, 1010);
+
+	for (val = min_gain; max_gain <= val; val--) {
+		ret = snd_soc_component_update_bits(comp,
+			      WSA881X_SPKR_DRV_GAIN,
+			      WSA881X_SPKR_PAG_GAIN_MASK,
+			      val << 4);
+		if (ret < 0)
+			dev_err(comp->dev, "Failed to change PA gain");
+
+		usleep_range(1000, 1010);
+	}
+
+	pm_runtime_mark_last_busy(comp->dev);
+	pm_runtime_put_autosuspend(comp->dev);
+
+	return 1;
+}
+
+static int wsa881x_get_port(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct wsa881x_priv *data = snd_soc_component_get_drvdata(comp);
+	struct soc_mixer_control *mixer =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int portidx = mixer->reg;
+
+	ucontrol->value.integer.value[0] = data->port_enable[portidx];
+
+
+	return 0;
+}
+
+static int wsa881x_boost_ctrl(struct snd_soc_component *comp, bool enable)
+{
+	if (enable)
+		snd_soc_component_update_bits(comp, WSA881X_BOOST_EN_CTL,
+					      WSA881X_BOOST_EN_MASK,
+					      WSA881X_BOOST_EN);
+	else
+		snd_soc_component_update_bits(comp, WSA881X_BOOST_EN_CTL,
+					      WSA881X_BOOST_EN_MASK, 0);
+	/*
+	 * 1.5ms sleep is needed after boost enable/disable as per
+	 * HW requirement
+	 */
+	usleep_range(1500, 1510);
+	return 0;
+}
+
+static int wsa881x_set_port(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct wsa881x_priv *data = snd_soc_component_get_drvdata(comp);
+	struct soc_mixer_control *mixer =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int portidx = mixer->reg;
+
+	if (ucontrol->value.integer.value[0]) {
+		if (data->port_enable[portidx])
+			return 0;
+
+		data->port_enable[portidx] = true;
+	} else {
+		if (!data->port_enable[portidx])
+			return 0;
+
+		data->port_enable[portidx] = false;
+	}
+
+	if (portidx == WSA881X_PORT_BOOST) /* Boost Switch */
+		wsa881x_boost_ctrl(comp, data->port_enable[portidx]);
+
+	return 1;
+}
+
+static const char * const smart_boost_lvl_text[] = {
+	"6.625 V", "6.750 V", "6.875 V", "7.000 V",
+	"7.125 V", "7.250 V", "7.375 V", "7.500 V",
+	"7.625 V", "7.750 V", "7.875 V", "8.000 V",
+	"8.125 V", "8.250 V", "8.375 V", "8.500 V"
+};
+
+static const struct soc_enum smart_boost_lvl_enum =
+	SOC_ENUM_SINGLE(WSA881X_BOOST_PRESET_OUT1, 0,
+			ARRAY_SIZE(smart_boost_lvl_text),
+			smart_boost_lvl_text);
+
+static const DECLARE_TLV_DB_SCALE(pa_gain, 0, 150, 0);
+
+static const struct snd_kcontrol_new wsa881x_snd_controls[] = {
+	SOC_ENUM("Smart Boost Level", smart_boost_lvl_enum),
+	WSA881X_PA_GAIN_TLV("PA Volume", WSA881X_SPKR_DRV_GAIN,
+			    4, 0xC, 1, pa_gain),
+	SOC_SINGLE_EXT("DAC Switch", WSA881X_PORT_DAC, 0, 1, 0,
+		       wsa881x_get_port, wsa881x_set_port),
+	SOC_SINGLE_EXT("COMP Switch", WSA881X_PORT_COMP, 0, 1, 0,
+		       wsa881x_get_port, wsa881x_set_port),
+	SOC_SINGLE_EXT("BOOST Switch", WSA881X_PORT_BOOST, 0, 1, 0,
+		       wsa881x_get_port, wsa881x_set_port),
+	SOC_SINGLE_EXT("VISENSE Switch", WSA881X_PORT_VISENSE, 0, 1, 0,
+		       wsa881x_get_port, wsa881x_set_port),
+};
+
+static const struct snd_soc_dapm_route wsa881x_audio_map[] = {
+	{ "RDAC", NULL, "IN" },
+	{ "RDAC", NULL, "DCLK" },
+	{ "RDAC", NULL, "ACLK" },
+	{ "RDAC", NULL, "Bandgap" },
+	{ "SPKR PGA", NULL, "RDAC" },
+	{ "SPKR", NULL, "SPKR PGA" },
+};
+
+static int wsa881x_visense_txfe_ctrl(struct snd_soc_component *comp,
+				     bool enable)
+{
+	struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp);
+
+	if (enable) {
+		regmap_multi_reg_write(wsa881x->regmap, wsa881x_vi_txfe_en_2_0,
+				       ARRAY_SIZE(wsa881x_vi_txfe_en_2_0));
+	} else {
+		snd_soc_component_update_bits(comp,
+					      WSA881X_SPKR_PROT_FE_VSENSE_VCM,
+					      0x08, 0x08);
+		/*
+		 * 200us sleep is needed after visense txfe disable as per
+		 * HW requirement.
+		 */
+		usleep_range(200, 210);
+		snd_soc_component_update_bits(comp, WSA881X_SPKR_PROT_FE_GAIN,
+					      0x01, 0x00);
+	}
+	return 0;
+}
+
+static int wsa881x_visense_adc_ctrl(struct snd_soc_component *comp,
+				    bool enable)
+{
+	snd_soc_component_update_bits(comp, WSA881X_ADC_EN_MODU_V, BIT(7),
+				      (enable << 7));
+	snd_soc_component_update_bits(comp, WSA881X_ADC_EN_MODU_I, BIT(7),
+				      (enable << 7));
+	return 0;
+}
+
+static int wsa881x_spkr_pa_event(struct snd_soc_dapm_widget *w,
+				 struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm);
+	struct wsa881x_priv *wsa881x = snd_soc_component_get_drvdata(comp);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL,
+					      WSA881X_SPKR_OCP_MASK,
+					      WSA881X_SPKR_OCP_EN);
+		regmap_multi_reg_write(wsa881x->regmap, wsa881x_pre_pmu_pa_2_0,
+				       ARRAY_SIZE(wsa881x_pre_pmu_pa_2_0));
+
+		snd_soc_component_update_bits(comp, WSA881X_SPKR_DRV_GAIN,
+					      WSA881X_PA_GAIN_SEL_MASK,
+					      WSA881X_PA_GAIN_SEL_REG);
+		break;
+	case SND_SOC_DAPM_POST_PMU:
+		if (wsa881x->port_prepared[WSA881X_PORT_VISENSE]) {
+			wsa881x_visense_txfe_ctrl(comp, true);
+			snd_soc_component_update_bits(comp,
+						      WSA881X_ADC_EN_SEL_IBAIS,
+						      0x07, 0x01);
+			wsa881x_visense_adc_ctrl(comp, true);
+		}
+
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		if (wsa881x->port_prepared[WSA881X_PORT_VISENSE]) {
+			wsa881x_visense_adc_ctrl(comp, false);
+			wsa881x_visense_txfe_ctrl(comp, false);
+		}
+
+		snd_soc_component_update_bits(comp, WSA881X_SPKR_OCP_CTL,
+					      WSA881X_SPKR_OCP_MASK,
+					      WSA881X_SPKR_OCP_EN |
+					      WSA881X_SPKR_OCP_HOLD);
+		break;
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wsa881x_dapm_widgets[] = {
+	SND_SOC_DAPM_INPUT("IN"),
+	SND_SOC_DAPM_DAC_E("RDAC", NULL, WSA881X_SPKR_DAC_CTL, 7, 0,
+			   NULL,
+			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_PGA_E("SPKR PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
+			   wsa881x_spkr_pa_event, SND_SOC_DAPM_PRE_PMU |
+			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("DCLK", WSA881X_CDC_DIG_CLK_CTL, 0, 0, NULL,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("ACLK", WSA881X_CDC_ANA_CLK_CTL, 0, 0, NULL,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("Bandgap", WSA881X_TEMP_OP, 3, 0,
+			    NULL,
+			    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUTPUT("SPKR"),
+};
+
+static int wsa881x_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
+	int i;
+
+	wsa881x->active_ports = 0;
+	for (i = 0; i < WSA881X_MAX_SWR_PORTS; i++) {
+		if (!wsa881x->port_enable[i])
+			continue;
+
+		wsa881x->port_config[wsa881x->active_ports] =
+							wsa881x_pconfig[i];
+		wsa881x->active_ports++;
+	}
+
+	return sdw_stream_add_slave(wsa881x->slave, &wsa881x->sconfig,
+				    wsa881x->port_config, wsa881x->active_ports,
+				    wsa881x->sruntime);
+}
+
+static int wsa881x_hw_free(struct snd_pcm_substream *substream,
+			   struct snd_soc_dai *dai)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
+
+	sdw_stream_remove_slave(wsa881x->slave, wsa881x->sruntime);
+
+	return 0;
+}
+
+static int wsa881x_set_sdw_stream(struct snd_soc_dai *dai,
+				  void *stream, int direction)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
+
+	wsa881x->sruntime = stream;
+
+	return 0;
+}
+
+static int wsa881x_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dai->dev);
+
+	if (mute)
+		regmap_update_bits(wsa881x->regmap, WSA881X_SPKR_DRV_EN, 0x80,
+				   0x00);
+	else
+		regmap_update_bits(wsa881x->regmap, WSA881X_SPKR_DRV_EN, 0x80,
+				   0x80);
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops wsa881x_dai_ops = {
+	.hw_params = wsa881x_hw_params,
+	.hw_free = wsa881x_hw_free,
+	.mute_stream = wsa881x_digital_mute,
+	.set_stream = wsa881x_set_sdw_stream,
+};
+
+static struct snd_soc_dai_driver wsa881x_dais[] = {
+	{
+		.name = "SPKR",
+		.id = 0,
+		.playback = {
+			.stream_name = "SPKR Playback",
+			.rates = SNDRV_PCM_RATE_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.rate_max = 48000,
+			.rate_min = 48000,
+			.channels_min = 1,
+			.channels_max = 1,
+		},
+		.ops = &wsa881x_dai_ops,
+	},
+};
+
+static const struct snd_soc_component_driver wsa881x_component_drv = {
+	.name = "WSA881x",
+	.probe = wsa881x_component_probe,
+	.controls = wsa881x_snd_controls,
+	.num_controls = ARRAY_SIZE(wsa881x_snd_controls),
+	.dapm_widgets = wsa881x_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wsa881x_dapm_widgets),
+	.dapm_routes = wsa881x_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(wsa881x_audio_map),
+	.endianness = 1,
+};
+
+static int wsa881x_update_status(struct sdw_slave *slave,
+				 enum sdw_slave_status status)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev);
+
+	if (status == SDW_SLAVE_ATTACHED && slave->dev_num > 0)
+		wsa881x_init(wsa881x);
+
+	return 0;
+}
+
+static int wsa881x_port_prep(struct sdw_slave *slave,
+			     struct sdw_prepare_ch *prepare_ch,
+			     enum sdw_port_prep_ops state)
+{
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(&slave->dev);
+
+	if (state == SDW_OPS_PORT_POST_PREP)
+		wsa881x->port_prepared[prepare_ch->num - 1] = true;
+	else
+		wsa881x->port_prepared[prepare_ch->num - 1] = false;
+
+	return 0;
+}
+
+static int wsa881x_bus_config(struct sdw_slave *slave,
+			      struct sdw_bus_params *params)
+{
+	sdw_write(slave, SWRS_SCP_HOST_CLK_DIV2_CTL_BANK(params->next_bank),
+		  0x01);
+
+	return 0;
+}
+
+static const struct sdw_slave_ops wsa881x_slave_ops = {
+	.update_status = wsa881x_update_status,
+	.bus_config = wsa881x_bus_config,
+	.port_prep = wsa881x_port_prep,
+};
+
+static int wsa881x_probe(struct sdw_slave *pdev,
+			 const struct sdw_device_id *id)
+{
+	struct wsa881x_priv *wsa881x;
+	struct device *dev = &pdev->dev;
+
+	wsa881x = devm_kzalloc(dev, sizeof(*wsa881x), GFP_KERNEL);
+	if (!wsa881x)
+		return -ENOMEM;
+
+	wsa881x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
+						GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(wsa881x->sd_n))
+		return dev_err_probe(dev, PTR_ERR(wsa881x->sd_n),
+				     "Shutdown Control GPIO not found\n");
+
+	/*
+	 * Backwards compatibility work-around.
+	 *
+	 * The SD_N GPIO is active low, however upstream DTS used always active
+	 * high.  Changing the flag in driver and DTS will break backwards
+	 * compatibility, so add a simple value inversion to work with both old
+	 * and new DTS.
+	 *
+	 * This won't work properly with DTS using the flags properly in cases:
+	 * 1. Old DTS with proper ACTIVE_LOW, however such case was broken
+	 *    before as the driver required the active high.
+	 * 2. New DTS with proper ACTIVE_HIGH (intended), which is rare case
+	 *    (not existing upstream) but possible. This is the price of
+	 *    backwards compatibility, therefore this hack should be removed at
+	 *    some point.
+	 */
+	wsa881x->sd_n_val = gpiod_is_active_low(wsa881x->sd_n);
+	if (!wsa881x->sd_n_val)
+		dev_warn(dev, "Using ACTIVE_HIGH for shutdown GPIO. Your DTB might be outdated or you use unsupported configuration for the GPIO.");
+
+	dev_set_drvdata(dev, wsa881x);
+	wsa881x->slave = pdev;
+	wsa881x->dev = dev;
+	wsa881x->sconfig.ch_count = 1;
+	wsa881x->sconfig.bps = 1;
+	wsa881x->sconfig.frame_rate = 48000;
+	wsa881x->sconfig.direction = SDW_DATA_DIR_RX;
+	wsa881x->sconfig.type = SDW_STREAM_PDM;
+	pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
+	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
+	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+	gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val);
+
+	wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
+	if (IS_ERR(wsa881x->regmap))
+		return dev_err_probe(dev, PTR_ERR(wsa881x->regmap), "regmap_init failed\n");
+
+	pm_runtime_set_autosuspend_delay(dev, 3000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return devm_snd_soc_register_component(dev,
+					       &wsa881x_component_drv,
+					       wsa881x_dais,
+					       ARRAY_SIZE(wsa881x_dais));
+}
+
+static int __maybe_unused wsa881x_runtime_suspend(struct device *dev)
+{
+	struct regmap *regmap = dev_get_regmap(dev, NULL);
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dev);
+
+	gpiod_direction_output(wsa881x->sd_n, wsa881x->sd_n_val);
+
+	regcache_cache_only(regmap, true);
+	regcache_mark_dirty(regmap);
+
+	return 0;
+}
+
+static int __maybe_unused wsa881x_runtime_resume(struct device *dev)
+{
+	struct sdw_slave *slave = dev_to_sdw_dev(dev);
+	struct regmap *regmap = dev_get_regmap(dev, NULL);
+	struct wsa881x_priv *wsa881x = dev_get_drvdata(dev);
+	unsigned long time;
+
+	gpiod_direction_output(wsa881x->sd_n, !wsa881x->sd_n_val);
+
+	time = wait_for_completion_timeout(&slave->initialization_complete,
+					   msecs_to_jiffies(WSA881X_PROBE_TIMEOUT));
+	if (!time) {
+		dev_err(dev, "Initialization not complete, timed out\n");
+		gpiod_direction_output(wsa881x->sd_n, wsa881x->sd_n_val);
+		return -ETIMEDOUT;
+	}
+
+	regcache_cache_only(regmap, false);
+	regcache_sync(regmap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops wsa881x_pm_ops = {
+	SET_RUNTIME_PM_OPS(wsa881x_runtime_suspend, wsa881x_runtime_resume, NULL)
+};
+
+static const struct sdw_device_id wsa881x_slave_id[] = {
+	SDW_SLAVE_ENTRY(0x0217, 0x2010, 0),
+	SDW_SLAVE_ENTRY(0x0217, 0x2110, 0),
+	{},
+};
+MODULE_DEVICE_TABLE(sdw, wsa881x_slave_id);
+
+static struct sdw_driver wsa881x_codec_driver = {
+	.probe	= wsa881x_probe,
+	.ops = &wsa881x_slave_ops,
+	.id_table = wsa881x_slave_id,
+	.driver = {
+		.name	= "wsa881x-codec",
+		.pm = &wsa881x_pm_ops,
+	}
+};
+module_sdw_driver(wsa881x_codec_driver);
+
+MODULE_DESCRIPTION("WSA881x codec driver");
+MODULE_LICENSE("GPL v2");