Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3774 insertions, 0 deletions

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
new file mode 100644
index 0000000000..96cfebded0
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -0,0 +1,3774 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  skl-topology.c - Implements Platform component ALSA controls/widget
+ *  handlers.
+ *
+ *  Copyright (C) 2014-2015 Intel Corp
+ *  Author: Jeeja KP <jeeja.kp@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/firmware.h>
+#include <linux/uuid.h>
+#include <sound/intel-nhlt.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-topology.h>
+#include <uapi/sound/snd_sst_tokens.h>
+#include <uapi/sound/skl-tplg-interface.h>
+#include "skl-sst-dsp.h"
+#include "skl-sst-ipc.h"
+#include "skl-topology.h"
+#include "skl.h"
+#include "../common/sst-dsp.h"
+#include "../common/sst-dsp-priv.h"
+
+#define SKL_CH_FIXUP_MASK		(1 << 0)
+#define SKL_RATE_FIXUP_MASK		(1 << 1)
+#define SKL_FMT_FIXUP_MASK		(1 << 2)
+#define SKL_IN_DIR_BIT_MASK		BIT(0)
+#define SKL_PIN_COUNT_MASK		GENMASK(7, 4)
+
+static const int mic_mono_list[] = {
+0, 1, 2, 3,
+};
+static const int mic_stereo_list[][SKL_CH_STEREO] = {
+{0, 1}, {0, 2}, {0, 3}, {1, 2}, {1, 3}, {2, 3},
+};
+static const int mic_trio_list[][SKL_CH_TRIO] = {
+{0, 1, 2}, {0, 1, 3}, {0, 2, 3}, {1, 2, 3},
+};
+static const int mic_quatro_list[][SKL_CH_QUATRO] = {
+{0, 1, 2, 3},
+};
+
+#define CHECK_HW_PARAMS(ch, freq, bps, prm_ch, prm_freq, prm_bps) \
+	((ch == prm_ch) && (bps == prm_bps) && (freq == prm_freq))
+
+void skl_tplg_d0i3_get(struct skl_dev *skl, enum d0i3_capability caps)
+{
+	struct skl_d0i3_data *d0i3 =  &skl->d0i3;
+
+	switch (caps) {
+	case SKL_D0I3_NONE:
+		d0i3->non_d0i3++;
+		break;
+
+	case SKL_D0I3_STREAMING:
+		d0i3->streaming++;
+		break;
+
+	case SKL_D0I3_NON_STREAMING:
+		d0i3->non_streaming++;
+		break;
+	}
+}
+
+void skl_tplg_d0i3_put(struct skl_dev *skl, enum d0i3_capability caps)
+{
+	struct skl_d0i3_data *d0i3 =  &skl->d0i3;
+
+	switch (caps) {
+	case SKL_D0I3_NONE:
+		d0i3->non_d0i3--;
+		break;
+
+	case SKL_D0I3_STREAMING:
+		d0i3->streaming--;
+		break;
+
+	case SKL_D0I3_NON_STREAMING:
+		d0i3->non_streaming--;
+		break;
+	}
+}
+
+/*
+ * SKL DSP driver modelling uses only few DAPM widgets so for rest we will
+ * ignore. This helpers checks if the SKL driver handles this widget type
+ */
+static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w,
+				  struct device *dev)
+{
+	if (w->dapm->dev != dev)
+		return false;
+
+	switch (w->id) {
+	case snd_soc_dapm_dai_link:
+	case snd_soc_dapm_dai_in:
+	case snd_soc_dapm_aif_in:
+	case snd_soc_dapm_aif_out:
+	case snd_soc_dapm_dai_out:
+	case snd_soc_dapm_switch:
+	case snd_soc_dapm_output:
+	case snd_soc_dapm_mux:
+
+		return false;
+	default:
+		return true;
+	}
+}
+
+static void skl_dump_mconfig(struct skl_dev *skl, struct skl_module_cfg *mcfg)
+{
+	struct skl_module_iface *iface = &mcfg->module->formats[mcfg->fmt_idx];
+
+	dev_dbg(skl->dev, "Dumping config\n");
+	dev_dbg(skl->dev, "Input Format:\n");
+	dev_dbg(skl->dev, "channels = %d\n", iface->inputs[0].fmt.channels);
+	dev_dbg(skl->dev, "s_freq = %d\n", iface->inputs[0].fmt.s_freq);
+	dev_dbg(skl->dev, "ch_cfg = %d\n", iface->inputs[0].fmt.ch_cfg);
+	dev_dbg(skl->dev, "valid bit depth = %d\n",
+				iface->inputs[0].fmt.valid_bit_depth);
+	dev_dbg(skl->dev, "Output Format:\n");
+	dev_dbg(skl->dev, "channels = %d\n", iface->outputs[0].fmt.channels);
+	dev_dbg(skl->dev, "s_freq = %d\n", iface->outputs[0].fmt.s_freq);
+	dev_dbg(skl->dev, "valid bit depth = %d\n",
+				iface->outputs[0].fmt.valid_bit_depth);
+	dev_dbg(skl->dev, "ch_cfg = %d\n", iface->outputs[0].fmt.ch_cfg);
+}
+
+static void skl_tplg_update_chmap(struct skl_module_fmt *fmt, int chs)
+{
+	int slot_map = 0xFFFFFFFF;
+	int start_slot = 0;
+	int i;
+
+	for (i = 0; i < chs; i++) {
+		/*
+		 * For 2 channels with starting slot as 0, slot map will
+		 * look like 0xFFFFFF10.
+		 */
+		slot_map &= (~(0xF << (4 * i)) | (start_slot << (4 * i)));
+		start_slot++;
+	}
+	fmt->ch_map = slot_map;
+}
+
+static void skl_tplg_update_params(struct skl_module_fmt *fmt,
+			struct skl_pipe_params *params, int fixup)
+{
+	if (fixup & SKL_RATE_FIXUP_MASK)
+		fmt->s_freq = params->s_freq;
+	if (fixup & SKL_CH_FIXUP_MASK) {
+		fmt->channels = params->ch;
+		skl_tplg_update_chmap(fmt, fmt->channels);
+	}
+	if (fixup & SKL_FMT_FIXUP_MASK) {
+		fmt->valid_bit_depth = skl_get_bit_depth(params->s_fmt);
+
+		/*
+		 * 16 bit is 16 bit container whereas 24 bit is in 32 bit
+		 * container so update bit depth accordingly
+		 */
+		switch (fmt->valid_bit_depth) {
+		case SKL_DEPTH_16BIT:
+			fmt->bit_depth = fmt->valid_bit_depth;
+			break;
+
+		default:
+			fmt->bit_depth = SKL_DEPTH_32BIT;
+			break;
+		}
+	}
+
+}
+
+/*
+ * A pipeline may have modules which impact the pcm parameters, like SRC,
+ * channel converter, format converter.
+ * We need to calculate the output params by applying the 'fixup'
+ * Topology will tell driver which type of fixup is to be applied by
+ * supplying the fixup mask, so based on that we calculate the output
+ *
+ * Now In FE the pcm hw_params is source/target format. Same is applicable
+ * for BE with its hw_params invoked.
+ * here based on FE, BE pipeline and direction we calculate the input and
+ * outfix and then apply that for a module
+ */
+static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg,
+		struct skl_pipe_params *params, bool is_fe)
+{
+	int in_fixup, out_fixup;
+	struct skl_module_fmt *in_fmt, *out_fmt;
+
+	/* Fixups will be applied to pin 0 only */
+	in_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].inputs[0].fmt;
+	out_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].outputs[0].fmt;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (is_fe) {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	} else {
+		if (is_fe) {
+			out_fixup = m_cfg->params_fixup;
+			in_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		} else {
+			in_fixup = m_cfg->params_fixup;
+			out_fixup = (~m_cfg->converter) &
+					m_cfg->params_fixup;
+		}
+	}
+
+	skl_tplg_update_params(in_fmt, params, in_fixup);
+	skl_tplg_update_params(out_fmt, params, out_fixup);
+}
+
+/*
+ * A module needs input and output buffers, which are dependent upon pcm
+ * params, so once we have calculate params, we need buffer calculation as
+ * well.
+ */
+static void skl_tplg_update_buffer_size(struct skl_dev *skl,
+				struct skl_module_cfg *mcfg)
+{
+	int multiplier = 1;
+	struct skl_module_fmt *in_fmt, *out_fmt;
+	struct skl_module_res *res;
+
+	/* Since fixups is applied to pin 0 only, ibs, obs needs
+	 * change for pin 0 only
+	 */
+	res = &mcfg->module->resources[mcfg->res_idx];
+	in_fmt = &mcfg->module->formats[mcfg->fmt_idx].inputs[0].fmt;
+	out_fmt = &mcfg->module->formats[mcfg->fmt_idx].outputs[0].fmt;
+
+	if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
+		multiplier = 5;
+
+	res->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) *
+			in_fmt->channels * (in_fmt->bit_depth >> 3) *
+			multiplier;
+
+	res->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) *
+			out_fmt->channels * (out_fmt->bit_depth >> 3) *
+			multiplier;
+}
+
+static u8 skl_tplg_be_dev_type(int dev_type)
+{
+	int ret;
+
+	switch (dev_type) {
+	case SKL_DEVICE_BT:
+		ret = NHLT_DEVICE_BT;
+		break;
+
+	case SKL_DEVICE_DMIC:
+		ret = NHLT_DEVICE_DMIC;
+		break;
+
+	case SKL_DEVICE_I2S:
+		ret = NHLT_DEVICE_I2S;
+		break;
+
+	default:
+		ret = NHLT_DEVICE_INVALID;
+		break;
+	}
+
+	return ret;
+}
+
+static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w,
+						struct skl_dev *skl)
+{
+	struct skl_module_cfg *m_cfg = w->priv;
+	int link_type, dir;
+	u32 ch, s_freq, s_fmt, s_cont;
+	struct nhlt_specific_cfg *cfg;
+	u8 dev_type = skl_tplg_be_dev_type(m_cfg->dev_type);
+	int fmt_idx = m_cfg->fmt_idx;
+	struct skl_module_iface *m_iface = &m_cfg->module->formats[fmt_idx];
+
+	/* check if we already have blob */
+	if (m_cfg->formats_config[SKL_PARAM_INIT].caps_size > 0)
+		return 0;
+
+	dev_dbg(skl->dev, "Applying default cfg blob\n");
+	switch (m_cfg->dev_type) {
+	case SKL_DEVICE_DMIC:
+		link_type = NHLT_LINK_DMIC;
+		dir = SNDRV_PCM_STREAM_CAPTURE;
+		s_freq = m_iface->inputs[0].fmt.s_freq;
+		s_fmt = m_iface->inputs[0].fmt.valid_bit_depth;
+		s_cont = m_iface->inputs[0].fmt.bit_depth;
+		ch = m_iface->inputs[0].fmt.channels;
+		break;
+
+	case SKL_DEVICE_I2S:
+		link_type = NHLT_LINK_SSP;
+		if (m_cfg->hw_conn_type == SKL_CONN_SOURCE) {
+			dir = SNDRV_PCM_STREAM_PLAYBACK;
+			s_freq = m_iface->outputs[0].fmt.s_freq;
+			s_fmt = m_iface->outputs[0].fmt.valid_bit_depth;
+			s_cont = m_iface->outputs[0].fmt.bit_depth;
+			ch = m_iface->outputs[0].fmt.channels;
+		} else {
+			dir = SNDRV_PCM_STREAM_CAPTURE;
+			s_freq = m_iface->inputs[0].fmt.s_freq;
+			s_fmt = m_iface->inputs[0].fmt.valid_bit_depth;
+			s_cont = m_iface->inputs[0].fmt.bit_depth;
+			ch = m_iface->inputs[0].fmt.channels;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* update the blob based on virtual bus_id and default params */
+	cfg = intel_nhlt_get_endpoint_blob(skl->dev, skl->nhlt, m_cfg->vbus_id,
+					   link_type, s_fmt, s_cont, ch,
+					   s_freq, dir, dev_type);
+	if (cfg) {
+		m_cfg->formats_config[SKL_PARAM_INIT].caps_size = cfg->size;
+		m_cfg->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps;
+	} else {
+		dev_err(skl->dev, "Blob NULL for id %x type %d dirn %d\n",
+					m_cfg->vbus_id, link_type, dir);
+		dev_err(skl->dev, "PCM: ch %d, freq %d, fmt %d/%d\n",
+					ch, s_freq, s_fmt, s_cont);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	struct skl_module_cfg *m_cfg = w->priv;
+	struct skl_pipe_params *params = m_cfg->pipe->p_params;
+	int p_conn_type = m_cfg->pipe->conn_type;
+	bool is_fe;
+
+	if (!m_cfg->params_fixup)
+		return;
+
+	dev_dbg(skl->dev, "Mconfig for widget=%s BEFORE updation\n",
+				w->name);
+
+	skl_dump_mconfig(skl, m_cfg);
+
+	if (p_conn_type == SKL_PIPE_CONN_TYPE_FE)
+		is_fe = true;
+	else
+		is_fe = false;
+
+	skl_tplg_update_params_fixup(m_cfg, params, is_fe);
+	skl_tplg_update_buffer_size(skl, m_cfg);
+
+	dev_dbg(skl->dev, "Mconfig for widget=%s AFTER updation\n",
+				w->name);
+
+	skl_dump_mconfig(skl, m_cfg);
+}
+
+/*
+ * some modules can have multiple params set from user control and
+ * need to be set after module is initialized. If set_param flag is
+ * set module params will be done after module is initialised.
+ */
+static int skl_tplg_set_module_params(struct snd_soc_dapm_widget *w,
+						struct skl_dev *skl)
+{
+	int i, ret;
+	struct skl_module_cfg *mconfig = w->priv;
+	const struct snd_kcontrol_new *k;
+	struct soc_bytes_ext *sb;
+	struct skl_algo_data *bc;
+	struct skl_specific_cfg *sp_cfg;
+
+	if (mconfig->formats_config[SKL_PARAM_SET].caps_size > 0 &&
+	    mconfig->formats_config[SKL_PARAM_SET].set_params == SKL_PARAM_SET) {
+		sp_cfg = &mconfig->formats_config[SKL_PARAM_SET];
+		ret = skl_set_module_params(skl, sp_cfg->caps,
+					sp_cfg->caps_size,
+					sp_cfg->param_id, mconfig);
+		if (ret < 0)
+			return ret;
+	}
+
+	for (i = 0; i < w->num_kcontrols; i++) {
+		k = &w->kcontrol_news[i];
+		if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
+			sb = (void *) k->private_value;
+			bc = (struct skl_algo_data *)sb->dobj.private;
+
+			if (bc->set_params == SKL_PARAM_SET) {
+				ret = skl_set_module_params(skl,
+						(u32 *)bc->params, bc->size,
+						bc->param_id, mconfig);
+				if (ret < 0)
+					return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * some module param can set from user control and this is required as
+ * when module is initailzed. if module param is required in init it is
+ * identifed by set_param flag. if set_param flag is not set, then this
+ * parameter needs to set as part of module init.
+ */
+static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w)
+{
+	const struct snd_kcontrol_new *k;
+	struct soc_bytes_ext *sb;
+	struct skl_algo_data *bc;
+	struct skl_module_cfg *mconfig = w->priv;
+	int i;
+
+	for (i = 0; i < w->num_kcontrols; i++) {
+		k = &w->kcontrol_news[i];
+		if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
+			sb = (struct soc_bytes_ext *)k->private_value;
+			bc = (struct skl_algo_data *)sb->dobj.private;
+
+			if (bc->set_params != SKL_PARAM_INIT)
+				continue;
+
+			mconfig->formats_config[SKL_PARAM_INIT].caps =
+							(u32 *)bc->params;
+			mconfig->formats_config[SKL_PARAM_INIT].caps_size =
+								bc->size;
+
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int skl_tplg_module_prepare(struct skl_dev *skl, struct skl_pipe *pipe,
+		struct snd_soc_dapm_widget *w, struct skl_module_cfg *mcfg)
+{
+	switch (mcfg->dev_type) {
+	case SKL_DEVICE_HDAHOST:
+		return skl_pcm_host_dma_prepare(skl->dev, pipe->p_params);
+
+	case SKL_DEVICE_HDALINK:
+		return skl_pcm_link_dma_prepare(skl->dev, pipe->p_params);
+	}
+
+	return 0;
+}
+
+/*
+ * Inside a pipe instance, we can have various modules. These modules need
+ * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by
+ * skl_init_module() routine, so invoke that for all modules in a pipeline
+ */
+static int
+skl_tplg_init_pipe_modules(struct skl_dev *skl, struct skl_pipe *pipe)
+{
+	struct skl_pipe_module *w_module;
+	struct snd_soc_dapm_widget *w;
+	struct skl_module_cfg *mconfig;
+	u8 cfg_idx;
+	int ret = 0;
+
+	list_for_each_entry(w_module, &pipe->w_list, node) {
+		guid_t *uuid_mod;
+		w = w_module->w;
+		mconfig = w->priv;
+
+		/* check if module ids are populated */
+		if (mconfig->id.module_id < 0) {
+			dev_err(skl->dev,
+					"module %pUL id not populated\n",
+					(guid_t *)mconfig->guid);
+			return -EIO;
+		}
+
+		cfg_idx = mconfig->pipe->cur_config_idx;
+		mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx;
+		mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx;
+
+		if (mconfig->module->loadable && skl->dsp->fw_ops.load_mod) {
+			ret = skl->dsp->fw_ops.load_mod(skl->dsp,
+				mconfig->id.module_id, mconfig->guid);
+			if (ret < 0)
+				return ret;
+		}
+
+		/* prepare the DMA if the module is gateway cpr */
+		ret = skl_tplg_module_prepare(skl, pipe, w, mconfig);
+		if (ret < 0)
+			return ret;
+
+		/* update blob if blob is null for be with default value */
+		skl_tplg_update_be_blob(w, skl);
+
+		/*
+		 * apply fix/conversion to module params based on
+		 * FE/BE params
+		 */
+		skl_tplg_update_module_params(w, skl);
+		uuid_mod = (guid_t *)mconfig->guid;
+		mconfig->id.pvt_id = skl_get_pvt_id(skl, uuid_mod,
+						mconfig->id.instance_id);
+		if (mconfig->id.pvt_id < 0)
+			return ret;
+		skl_tplg_set_module_init_data(w);
+
+		ret = skl_dsp_get_core(skl->dsp, mconfig->core_id);
+		if (ret < 0) {
+			dev_err(skl->dev, "Failed to wake up core %d ret=%d\n",
+						mconfig->core_id, ret);
+			return ret;
+		}
+
+		ret = skl_init_module(skl, mconfig);
+		if (ret < 0) {
+			skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id);
+			goto err;
+		}
+
+		ret = skl_tplg_set_module_params(w, skl);
+		if (ret < 0)
+			goto err;
+	}
+
+	return 0;
+err:
+	skl_dsp_put_core(skl->dsp, mconfig->core_id);
+	return ret;
+}
+
+static int skl_tplg_unload_pipe_modules(struct skl_dev *skl,
+	 struct skl_pipe *pipe)
+{
+	int ret = 0;
+	struct skl_pipe_module *w_module;
+	struct skl_module_cfg *mconfig;
+
+	list_for_each_entry(w_module, &pipe->w_list, node) {
+		guid_t *uuid_mod;
+		mconfig  = w_module->w->priv;
+		uuid_mod = (guid_t *)mconfig->guid;
+
+		if (mconfig->module->loadable && skl->dsp->fw_ops.unload_mod) {
+			ret = skl->dsp->fw_ops.unload_mod(skl->dsp,
+						mconfig->id.module_id);
+			if (ret < 0)
+				return -EIO;
+		}
+		skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id);
+
+		ret = skl_dsp_put_core(skl->dsp, mconfig->core_id);
+		if (ret < 0) {
+			/* don't return; continue with other modules */
+			dev_err(skl->dev, "Failed to sleep core %d ret=%d\n",
+				mconfig->core_id, ret);
+		}
+	}
+
+	/* no modules to unload in this path, so return */
+	return ret;
+}
+
+static void skl_tplg_set_pipe_config_idx(struct skl_pipe *pipe, int idx)
+{
+	pipe->cur_config_idx = idx;
+	pipe->memory_pages = pipe->configs[idx].mem_pages;
+}
+
+/*
+ * Here, we select pipe format based on the pipe type and pipe
+ * direction to determine the current config index for the pipeline.
+ * The config index is then used to select proper module resources.
+ * Intermediate pipes currently have a fixed format hence we select the
+ * 0th configuratation by default for such pipes.
+ */
+static int
+skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig)
+{
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct skl_pipe_params *params = pipe->p_params;
+	struct skl_path_config *pconfig = &pipe->configs[0];
+	struct skl_pipe_fmt *fmt = NULL;
+	bool in_fmt = false;
+	int i;
+
+	if (pipe->nr_cfgs == 0) {
+		skl_tplg_set_pipe_config_idx(pipe, 0);
+		return 0;
+	}
+
+	if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE || pipe->nr_cfgs == 1) {
+		dev_dbg(skl->dev, "No conn_type or just 1 pathcfg, taking 0th for %d\n",
+			pipe->ppl_id);
+		skl_tplg_set_pipe_config_idx(pipe, 0);
+		return 0;
+	}
+
+	if ((pipe->conn_type == SKL_PIPE_CONN_TYPE_FE &&
+	     pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) ||
+	     (pipe->conn_type == SKL_PIPE_CONN_TYPE_BE &&
+	     pipe->direction == SNDRV_PCM_STREAM_CAPTURE))
+		in_fmt = true;
+
+	for (i = 0; i < pipe->nr_cfgs; i++) {
+		pconfig = &pipe->configs[i];
+		if (in_fmt)
+			fmt = &pconfig->in_fmt;
+		else
+			fmt = &pconfig->out_fmt;
+
+		if (CHECK_HW_PARAMS(params->ch, params->s_freq, params->s_fmt,
+				    fmt->channels, fmt->freq, fmt->bps)) {
+			skl_tplg_set_pipe_config_idx(pipe, i);
+			dev_dbg(skl->dev, "Using pipe config: %d\n", i);
+			return 0;
+		}
+	}
+
+	dev_err(skl->dev, "Invalid pipe config: %d %d %d for pipe: %d\n",
+		params->ch, params->s_freq, params->s_fmt, pipe->ppl_id);
+	return -EINVAL;
+}
+
+/*
+ * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we
+ * need create the pipeline. So we do following:
+ *   - Create the pipeline
+ *   - Initialize the modules in pipeline
+ *   - finally bind all modules together
+ */
+static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	int ret;
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_pipe_module *w_module;
+	struct skl_pipe *s_pipe = mconfig->pipe;
+	struct skl_module_cfg *src_module = NULL, *dst_module, *module;
+	struct skl_module_deferred_bind *modules;
+
+	ret = skl_tplg_get_pipe_config(skl, mconfig);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Create a list of modules for pipe.
+	 * This list contains modules from source to sink
+	 */
+	ret = skl_create_pipeline(skl, mconfig->pipe);
+	if (ret < 0)
+		return ret;
+
+	/* Init all pipe modules from source to sink */
+	ret = skl_tplg_init_pipe_modules(skl, s_pipe);
+	if (ret < 0)
+		return ret;
+
+	/* Bind modules from source to sink */
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		dst_module = w_module->w->priv;
+
+		if (src_module == NULL) {
+			src_module = dst_module;
+			continue;
+		}
+
+		ret = skl_bind_modules(skl, src_module, dst_module);
+		if (ret < 0)
+			return ret;
+
+		src_module = dst_module;
+	}
+
+	/*
+	 * When the destination module is initialized, check for these modules
+	 * in deferred bind list. If found, bind them.
+	 */
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		if (list_empty(&skl->bind_list))
+			break;
+
+		list_for_each_entry(modules, &skl->bind_list, node) {
+			module = w_module->w->priv;
+			if (modules->dst == module)
+				skl_bind_modules(skl, modules->src,
+							modules->dst);
+		}
+	}
+
+	return 0;
+}
+
+static int skl_fill_sink_instance_id(struct skl_dev *skl, u32 *params,
+				int size, struct skl_module_cfg *mcfg)
+{
+	int i, pvt_id;
+
+	if (mcfg->m_type == SKL_MODULE_TYPE_KPB) {
+		struct skl_kpb_params *kpb_params =
+				(struct skl_kpb_params *)params;
+		struct skl_mod_inst_map *inst = kpb_params->u.map;
+
+		for (i = 0; i < kpb_params->num_modules; i++) {
+			pvt_id = skl_get_pvt_instance_id_map(skl, inst->mod_id,
+								inst->inst_id);
+			if (pvt_id < 0)
+				return -EINVAL;
+
+			inst->inst_id = pvt_id;
+			inst++;
+		}
+	}
+
+	return 0;
+}
+/*
+ * Some modules require params to be set after the module is bound to
+ * all pins connected.
+ *
+ * The module provider initializes set_param flag for such modules and we
+ * send params after binding
+ */
+static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w,
+			struct skl_module_cfg *mcfg, struct skl_dev *skl)
+{
+	int i, ret;
+	struct skl_module_cfg *mconfig = w->priv;
+	const struct snd_kcontrol_new *k;
+	struct soc_bytes_ext *sb;
+	struct skl_algo_data *bc;
+	struct skl_specific_cfg *sp_cfg;
+	u32 *params;
+
+	/*
+	 * check all out/in pins are in bind state.
+	 * if so set the module param
+	 */
+	for (i = 0; i < mcfg->module->max_output_pins; i++) {
+		if (mcfg->m_out_pin[i].pin_state != SKL_PIN_BIND_DONE)
+			return 0;
+	}
+
+	for (i = 0; i < mcfg->module->max_input_pins; i++) {
+		if (mcfg->m_in_pin[i].pin_state != SKL_PIN_BIND_DONE)
+			return 0;
+	}
+
+	if (mconfig->formats_config[SKL_PARAM_BIND].caps_size > 0 &&
+	    mconfig->formats_config[SKL_PARAM_BIND].set_params ==
+								SKL_PARAM_BIND) {
+		sp_cfg = &mconfig->formats_config[SKL_PARAM_BIND];
+		ret = skl_set_module_params(skl, sp_cfg->caps,
+					sp_cfg->caps_size,
+					sp_cfg->param_id, mconfig);
+		if (ret < 0)
+			return ret;
+	}
+
+	for (i = 0; i < w->num_kcontrols; i++) {
+		k = &w->kcontrol_news[i];
+		if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
+			sb = (void *) k->private_value;
+			bc = (struct skl_algo_data *)sb->dobj.private;
+
+			if (bc->set_params == SKL_PARAM_BIND) {
+				params = kmemdup(bc->params, bc->max, GFP_KERNEL);
+				if (!params)
+					return -ENOMEM;
+
+				skl_fill_sink_instance_id(skl, params, bc->max,
+								mconfig);
+
+				ret = skl_set_module_params(skl, params,
+						bc->max, bc->param_id, mconfig);
+				kfree(params);
+
+				if (ret < 0)
+					return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int skl_get_module_id(struct skl_dev *skl, guid_t *uuid)
+{
+	struct uuid_module *module;
+
+	list_for_each_entry(module, &skl->uuid_list, list) {
+		if (guid_equal(uuid, &module->uuid))
+			return module->id;
+	}
+
+	return -EINVAL;
+}
+
+static int skl_tplg_find_moduleid_from_uuid(struct skl_dev *skl,
+					const struct snd_kcontrol_new *k)
+{
+	struct soc_bytes_ext *sb = (void *) k->private_value;
+	struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private;
+	struct skl_kpb_params *uuid_params, *params;
+	struct hdac_bus *bus = skl_to_bus(skl);
+	int i, size, module_id;
+
+	if (bc->set_params == SKL_PARAM_BIND && bc->max) {
+		uuid_params = (struct skl_kpb_params *)bc->params;
+		size = struct_size(params, u.map, uuid_params->num_modules);
+
+		params = devm_kzalloc(bus->dev, size, GFP_KERNEL);
+		if (!params)
+			return -ENOMEM;
+
+		params->num_modules = uuid_params->num_modules;
+
+		for (i = 0; i < uuid_params->num_modules; i++) {
+			module_id = skl_get_module_id(skl,
+				&uuid_params->u.map_uuid[i].mod_uuid);
+			if (module_id < 0) {
+				devm_kfree(bus->dev, params);
+				return -EINVAL;
+			}
+
+			params->u.map[i].mod_id = module_id;
+			params->u.map[i].inst_id =
+				uuid_params->u.map_uuid[i].inst_id;
+		}
+
+		devm_kfree(bus->dev, bc->params);
+		bc->params = (char *)params;
+		bc->max = size;
+	}
+
+	return 0;
+}
+
+/*
+ * Retrieve the module id from UUID mentioned in the
+ * post bind params
+ */
+void skl_tplg_add_moduleid_in_bind_params(struct skl_dev *skl,
+				struct snd_soc_dapm_widget *w)
+{
+	struct skl_module_cfg *mconfig = w->priv;
+	int i;
+
+	/*
+	 * Post bind params are used for only for KPB
+	 * to set copier instances to drain the data
+	 * in fast mode
+	 */
+	if (mconfig->m_type != SKL_MODULE_TYPE_KPB)
+		return;
+
+	for (i = 0; i < w->num_kcontrols; i++)
+		if ((w->kcontrol_news[i].access &
+			SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) &&
+			(skl_tplg_find_moduleid_from_uuid(skl,
+			&w->kcontrol_news[i]) < 0))
+			dev_err(skl->dev,
+				"%s: invalid kpb post bind params\n",
+				__func__);
+}
+
+static int skl_tplg_module_add_deferred_bind(struct skl_dev *skl,
+	struct skl_module_cfg *src, struct skl_module_cfg *dst)
+{
+	struct skl_module_deferred_bind *m_list, *modules;
+	int i;
+
+	/* only supported for module with static pin connection */
+	for (i = 0; i < dst->module->max_input_pins; i++) {
+		struct skl_module_pin *pin = &dst->m_in_pin[i];
+
+		if (pin->is_dynamic)
+			continue;
+
+		if ((pin->id.module_id  == src->id.module_id) &&
+			(pin->id.instance_id  == src->id.instance_id)) {
+
+			if (!list_empty(&skl->bind_list)) {
+				list_for_each_entry(modules, &skl->bind_list, node) {
+					if (modules->src == src && modules->dst == dst)
+						return 0;
+				}
+			}
+
+			m_list = kzalloc(sizeof(*m_list), GFP_KERNEL);
+			if (!m_list)
+				return -ENOMEM;
+
+			m_list->src = src;
+			m_list->dst = dst;
+
+			list_add(&m_list->node, &skl->bind_list);
+		}
+	}
+
+	return 0;
+}
+
+static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w,
+				struct skl_dev *skl,
+				struct snd_soc_dapm_widget *src_w,
+				struct skl_module_cfg *src_mconfig)
+{
+	struct snd_soc_dapm_path *p;
+	struct snd_soc_dapm_widget *sink = NULL, *next_sink = NULL;
+	struct skl_module_cfg *sink_mconfig;
+	int ret;
+
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if (!p->connect)
+			continue;
+
+		dev_dbg(skl->dev,
+			"%s: src widget=%s\n", __func__, w->name);
+		dev_dbg(skl->dev,
+			"%s: sink widget=%s\n", __func__, p->sink->name);
+
+		next_sink = p->sink;
+
+		if (!is_skl_dsp_widget_type(p->sink, skl->dev))
+			return skl_tplg_bind_sinks(p->sink, skl, src_w, src_mconfig);
+
+		/*
+		 * here we will check widgets in sink pipelines, so that
+		 * can be any widgets type and we are only interested if
+		 * they are ones used for SKL so check that first
+		 */
+		if ((p->sink->priv != NULL) &&
+				is_skl_dsp_widget_type(p->sink, skl->dev)) {
+
+			sink = p->sink;
+			sink_mconfig = sink->priv;
+
+			/*
+			 * Modules other than PGA leaf can be connected
+			 * directly or via switch to a module in another
+			 * pipeline. EX: reference path
+			 * when the path is enabled, the dst module that needs
+			 * to be bound may not be initialized. if the module is
+			 * not initialized, add these modules in the deferred
+			 * bind list and when the dst module is initialised,
+			 * bind this module to the dst_module in deferred list.
+			 */
+			if (((src_mconfig->m_state == SKL_MODULE_INIT_DONE)
+				&& (sink_mconfig->m_state == SKL_MODULE_UNINIT))) {
+
+				ret = skl_tplg_module_add_deferred_bind(skl,
+						src_mconfig, sink_mconfig);
+
+				if (ret < 0)
+					return ret;
+
+			}
+
+
+			if (src_mconfig->m_state == SKL_MODULE_UNINIT ||
+				sink_mconfig->m_state == SKL_MODULE_UNINIT)
+				continue;
+
+			/* Bind source to sink, mixin is always source */
+			ret = skl_bind_modules(skl, src_mconfig, sink_mconfig);
+			if (ret)
+				return ret;
+
+			/* set module params after bind */
+			skl_tplg_set_module_bind_params(src_w,
+					src_mconfig, skl);
+			skl_tplg_set_module_bind_params(sink,
+					sink_mconfig, skl);
+
+			/* Start sinks pipe first */
+			if (sink_mconfig->pipe->state != SKL_PIPE_STARTED) {
+				if (sink_mconfig->pipe->conn_type !=
+							SKL_PIPE_CONN_TYPE_FE)
+					ret = skl_run_pipe(skl,
+							sink_mconfig->pipe);
+				if (ret)
+					return ret;
+			}
+		}
+	}
+
+	if (!sink && next_sink)
+		return skl_tplg_bind_sinks(next_sink, skl, src_w, src_mconfig);
+
+	return 0;
+}
+
+/*
+ * A PGA represents a module in a pipeline. So in the Pre-PMU event of PGA
+ * we need to do following:
+ *   - Bind to sink pipeline
+ *      Since the sink pipes can be running and we don't get mixer event on
+ *      connect for already running mixer, we need to find the sink pipes
+ *      here and bind to them. This way dynamic connect works.
+ *   - Start sink pipeline, if not running
+ *   - Then run current pipe
+ */
+static int skl_tplg_pga_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	struct skl_module_cfg *src_mconfig;
+	int ret = 0;
+
+	src_mconfig = w->priv;
+
+	/*
+	 * find which sink it is connected to, bind with the sink,
+	 * if sink is not started, start sink pipe first, then start
+	 * this pipe
+	 */
+	ret = skl_tplg_bind_sinks(w, skl, w, src_mconfig);
+	if (ret)
+		return ret;
+
+	/* Start source pipe last after starting all sinks */
+	if (src_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE)
+		return skl_run_pipe(skl, src_mconfig->pipe);
+
+	return 0;
+}
+
+static struct snd_soc_dapm_widget *skl_get_src_dsp_widget(
+		struct snd_soc_dapm_widget *w, struct skl_dev *skl)
+{
+	struct snd_soc_dapm_path *p;
+	struct snd_soc_dapm_widget *src_w = NULL;
+
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		src_w = p->source;
+		if (!p->connect)
+			continue;
+
+		dev_dbg(skl->dev, "sink widget=%s\n", w->name);
+		dev_dbg(skl->dev, "src widget=%s\n", p->source->name);
+
+		/*
+		 * here we will check widgets in sink pipelines, so that can
+		 * be any widgets type and we are only interested if they are
+		 * ones used for SKL so check that first
+		 */
+		if ((p->source->priv != NULL) &&
+				is_skl_dsp_widget_type(p->source, skl->dev)) {
+			return p->source;
+		}
+	}
+
+	if (src_w != NULL)
+		return skl_get_src_dsp_widget(src_w, skl);
+
+	return NULL;
+}
+
+/*
+ * in the Post-PMU event of mixer we need to do following:
+ *   - Check if this pipe is running
+ *   - if not, then
+ *	- bind this pipeline to its source pipeline
+ *	  if source pipe is already running, this means it is a dynamic
+ *	  connection and we need to bind only to that pipe
+ *	- start this pipeline
+ */
+static int skl_tplg_mixer_dapm_post_pmu_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	int ret = 0;
+	struct snd_soc_dapm_widget *source, *sink;
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	int src_pipe_started = 0;
+
+	sink = w;
+	sink_mconfig = sink->priv;
+
+	/*
+	 * If source pipe is already started, that means source is driving
+	 * one more sink before this sink got connected, Since source is
+	 * started, bind this sink to source and start this pipe.
+	 */
+	source = skl_get_src_dsp_widget(w, skl);
+	if (source != NULL) {
+		src_mconfig = source->priv;
+		sink_mconfig = sink->priv;
+		src_pipe_started = 1;
+
+		/*
+		 * check pipe state, then no need to bind or start the
+		 * pipe
+		 */
+		if (src_mconfig->pipe->state != SKL_PIPE_STARTED)
+			src_pipe_started = 0;
+	}
+
+	if (src_pipe_started) {
+		ret = skl_bind_modules(skl, src_mconfig, sink_mconfig);
+		if (ret)
+			return ret;
+
+		/* set module params after bind */
+		skl_tplg_set_module_bind_params(source, src_mconfig, skl);
+		skl_tplg_set_module_bind_params(sink, sink_mconfig, skl);
+
+		if (sink_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE)
+			ret = skl_run_pipe(skl, sink_mconfig->pipe);
+	}
+
+	return ret;
+}
+
+/*
+ * in the Pre-PMD event of mixer we need to do following:
+ *   - Stop the pipe
+ *   - find the source connections and remove that from dapm_path_list
+ *   - unbind with source pipelines if still connected
+ */
+static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	int ret = 0, i;
+
+	sink_mconfig = w->priv;
+
+	/* Stop the pipe */
+	ret = skl_stop_pipe(skl, sink_mconfig->pipe);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < sink_mconfig->module->max_input_pins; i++) {
+		if (sink_mconfig->m_in_pin[i].pin_state == SKL_PIN_BIND_DONE) {
+			src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg;
+			if (!src_mconfig)
+				continue;
+
+			ret = skl_unbind_modules(skl,
+						src_mconfig, sink_mconfig);
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * in the Post-PMD event of mixer we need to do following:
+ *   - Unbind the modules within the pipeline
+ *   - Delete the pipeline (modules are not required to be explicitly
+ *     deleted, pipeline delete is enough here
+ */
+static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_pipe_module *w_module;
+	struct skl_module_cfg *src_module = NULL, *dst_module;
+	struct skl_pipe *s_pipe = mconfig->pipe;
+	struct skl_module_deferred_bind *modules, *tmp;
+
+	if (s_pipe->state == SKL_PIPE_INVALID)
+		return -EINVAL;
+
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		if (list_empty(&skl->bind_list))
+			break;
+
+		src_module = w_module->w->priv;
+
+		list_for_each_entry_safe(modules, tmp, &skl->bind_list, node) {
+			/*
+			 * When the destination module is deleted, Unbind the
+			 * modules from deferred bind list.
+			 */
+			if (modules->dst == src_module) {
+				skl_unbind_modules(skl, modules->src,
+						modules->dst);
+			}
+
+			/*
+			 * When the source module is deleted, remove this entry
+			 * from the deferred bind list.
+			 */
+			if (modules->src == src_module) {
+				list_del(&modules->node);
+				modules->src = NULL;
+				modules->dst = NULL;
+				kfree(modules);
+			}
+		}
+	}
+
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		dst_module = w_module->w->priv;
+
+		if (src_module == NULL) {
+			src_module = dst_module;
+			continue;
+		}
+
+		skl_unbind_modules(skl, src_module, dst_module);
+		src_module = dst_module;
+	}
+
+	skl_delete_pipe(skl, mconfig->pipe);
+
+	list_for_each_entry(w_module, &s_pipe->w_list, node) {
+		src_module = w_module->w->priv;
+		src_module->m_state = SKL_MODULE_UNINIT;
+	}
+
+	return skl_tplg_unload_pipe_modules(skl, s_pipe);
+}
+
+/*
+ * in the Post-PMD event of PGA we need to do following:
+ *   - Stop the pipeline
+ *   - In source pipe is connected, unbind with source pipelines
+ */
+static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w,
+							struct skl_dev *skl)
+{
+	struct skl_module_cfg *src_mconfig, *sink_mconfig;
+	int ret = 0, i;
+
+	src_mconfig = w->priv;
+
+	/* Stop the pipe since this is a mixin module */
+	ret = skl_stop_pipe(skl, src_mconfig->pipe);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < src_mconfig->module->max_output_pins; i++) {
+		if (src_mconfig->m_out_pin[i].pin_state == SKL_PIN_BIND_DONE) {
+			sink_mconfig = src_mconfig->m_out_pin[i].tgt_mcfg;
+			if (!sink_mconfig)
+				continue;
+			/*
+			 * This is a connecter and if path is found that means
+			 * unbind between source and sink has not happened yet
+			 */
+			ret = skl_unbind_modules(skl, src_mconfig,
+							sink_mconfig);
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * In modelling, we assume there will be ONLY one mixer in a pipeline. If a
+ * second one is required that is created as another pipe entity.
+ * The mixer is responsible for pipe management and represent a pipeline
+ * instance
+ */
+static int skl_tplg_mixer_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k, int event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct skl_dev *skl = get_skl_ctx(dapm->dev);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return skl_tplg_mixer_dapm_pre_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMU:
+		return skl_tplg_mixer_dapm_post_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_PRE_PMD:
+		return skl_tplg_mixer_dapm_pre_pmd_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMD:
+		return skl_tplg_mixer_dapm_post_pmd_event(w, skl);
+	}
+
+	return 0;
+}
+
+/*
+ * In modelling, we assumed rest of the modules in pipeline are PGA. But we
+ * are interested in last PGA (leaf PGA) in a pipeline to disconnect with
+ * the sink when it is running (two FE to one BE or one FE to two BE)
+ * scenarios
+ */
+static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int event)
+
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct skl_dev *skl = get_skl_ctx(dapm->dev);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return skl_tplg_pga_dapm_pre_pmu_event(w, skl);
+
+	case SND_SOC_DAPM_POST_PMD:
+		return skl_tplg_pga_dapm_post_pmd_event(w, skl);
+	}
+
+	return 0;
+}
+
+static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol,
+					 struct snd_ctl_elem_value *ucontrol,
+					 bool is_set)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct hdac_bus *bus = snd_soc_component_get_drvdata(component);
+	struct skl_dev *skl = bus_to_skl(bus);
+	struct skl_pipeline *ppl;
+	struct skl_pipe *pipe = NULL;
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	u32 *pipe_id;
+
+	if (!ec)
+		return -EINVAL;
+
+	if (is_set && ucontrol->value.enumerated.item[0] > ec->items)
+		return -EINVAL;
+
+	pipe_id = ec->dobj.private;
+
+	list_for_each_entry(ppl, &skl->ppl_list, node) {
+		if (ppl->pipe->ppl_id == *pipe_id) {
+			pipe = ppl->pipe;
+			break;
+		}
+	}
+	if (!pipe)
+		return -EIO;
+
+	if (is_set)
+		skl_tplg_set_pipe_config_idx(pipe, ucontrol->value.enumerated.item[0]);
+	else
+		ucontrol->value.enumerated.item[0] = pipe->cur_config_idx;
+
+	return 0;
+}
+
+static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false);
+}
+
+static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true);
+}
+
+static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false);
+}
+
+static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol,
+					  struct snd_ctl_elem_value *ucontrol)
+{
+	return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true);
+}
+
+static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol,
+			unsigned int __user *data, unsigned int size)
+{
+	struct soc_bytes_ext *sb =
+			(struct soc_bytes_ext *)kcontrol->private_value;
+	struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private;
+	struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_dev *skl = get_skl_ctx(w->dapm->dev);
+
+	if (w->power)
+		skl_get_module_params(skl, (u32 *)bc->params,
+				      bc->size, bc->param_id, mconfig);
+
+	/* decrement size for TLV header */
+	size -= 2 * sizeof(u32);
+
+	/* check size as we don't want to send kernel data */
+	if (size > bc->max)
+		size = bc->max;
+
+	if (bc->params) {
+		if (copy_to_user(data, &bc->param_id, sizeof(u32)))
+			return -EFAULT;
+		if (copy_to_user(data + 1, &size, sizeof(u32)))
+			return -EFAULT;
+		if (copy_to_user(data + 2, bc->params, size))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#define SKL_PARAM_VENDOR_ID 0xff
+
+static int skl_tplg_tlv_control_set(struct snd_kcontrol *kcontrol,
+			const unsigned int __user *data, unsigned int size)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
+	struct skl_module_cfg *mconfig = w->priv;
+	struct soc_bytes_ext *sb =
+			(struct soc_bytes_ext *)kcontrol->private_value;
+	struct skl_algo_data *ac = (struct skl_algo_data *)sb->dobj.private;
+	struct skl_dev *skl = get_skl_ctx(w->dapm->dev);
+
+	if (ac->params) {
+		if (size > ac->max)
+			return -EINVAL;
+		ac->size = size;
+
+		if (copy_from_user(ac->params, data, size))
+			return -EFAULT;
+
+		if (w->power)
+			return skl_set_module_params(skl,
+						(u32 *)ac->params, ac->size,
+						ac->param_id, mconfig);
+	}
+
+	return 0;
+}
+
+static int skl_tplg_mic_control_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
+	struct skl_module_cfg *mconfig = w->priv;
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	u32 ch_type = *((u32 *)ec->dobj.private);
+
+	if (mconfig->dmic_ch_type == ch_type)
+		ucontrol->value.enumerated.item[0] =
+					mconfig->dmic_ch_combo_index;
+	else
+		ucontrol->value.enumerated.item[0] = 0;
+
+	return 0;
+}
+
+static int skl_fill_mic_sel_params(struct skl_module_cfg *mconfig,
+	struct skl_mic_sel_config *mic_cfg, struct device *dev)
+{
+	struct skl_specific_cfg *sp_cfg =
+				&mconfig->formats_config[SKL_PARAM_INIT];
+
+	sp_cfg->caps_size = sizeof(struct skl_mic_sel_config);
+	sp_cfg->set_params = SKL_PARAM_SET;
+	sp_cfg->param_id = 0x00;
+	if (!sp_cfg->caps) {
+		sp_cfg->caps = devm_kzalloc(dev, sp_cfg->caps_size, GFP_KERNEL);
+		if (!sp_cfg->caps)
+			return -ENOMEM;
+	}
+
+	mic_cfg->mic_switch = SKL_MIC_SEL_SWITCH;
+	mic_cfg->flags = 0;
+	memcpy(sp_cfg->caps, mic_cfg, sp_cfg->caps_size);
+
+	return 0;
+}
+
+static int skl_tplg_mic_control_set(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
+	struct skl_module_cfg *mconfig = w->priv;
+	struct skl_mic_sel_config mic_cfg = {0};
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	u32 ch_type = *((u32 *)ec->dobj.private);
+	const int *list;
+	u8 in_ch, out_ch, index;
+
+	mconfig->dmic_ch_type = ch_type;
+	mconfig->dmic_ch_combo_index = ucontrol->value.enumerated.item[0];
+
+	/* enum control index 0 is INVALID, so no channels to be set */
+	if (mconfig->dmic_ch_combo_index == 0)
+		return 0;
+
+	/* No valid channel selection map for index 0, so offset by 1 */
+	index = mconfig->dmic_ch_combo_index - 1;
+
+	switch (ch_type) {
+	case SKL_CH_MONO:
+		if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_mono_list))
+			return -EINVAL;
+
+		list = &mic_mono_list[index];
+		break;
+
+	case SKL_CH_STEREO:
+		if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_stereo_list))
+			return -EINVAL;
+
+		list = mic_stereo_list[index];
+		break;
+
+	case SKL_CH_TRIO:
+		if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_trio_list))
+			return -EINVAL;
+
+		list = mic_trio_list[index];
+		break;
+
+	case SKL_CH_QUATRO:
+		if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_quatro_list))
+			return -EINVAL;
+
+		list = mic_quatro_list[index];
+		break;
+
+	default:
+		dev_err(w->dapm->dev,
+				"Invalid channel %d for mic_select module\n",
+				ch_type);
+		return -EINVAL;
+
+	}
+
+	/* channel type enum map to number of chanels for that type */
+	for (out_ch = 0; out_ch < ch_type; out_ch++) {
+		in_ch = list[out_ch];
+		mic_cfg.blob[out_ch][in_ch] = SKL_DEFAULT_MIC_SEL_GAIN;
+	}
+
+	return skl_fill_mic_sel_params(mconfig, &mic_cfg, w->dapm->dev);
+}
+
+/*
+ * Fill the dma id for host and link. In case of passthrough
+ * pipeline, this will both host and link in the same
+ * pipeline, so need to copy the link and host based on dev_type
+ */
+static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg,
+				struct skl_pipe_params *params)
+{
+	struct skl_pipe *pipe = mcfg->pipe;
+
+	if (pipe->passthru) {
+		switch (mcfg->dev_type) {
+		case SKL_DEVICE_HDALINK:
+			pipe->p_params->link_dma_id = params->link_dma_id;
+			pipe->p_params->link_index = params->link_index;
+			pipe->p_params->link_bps = params->link_bps;
+			break;
+
+		case SKL_DEVICE_HDAHOST:
+			pipe->p_params->host_dma_id = params->host_dma_id;
+			pipe->p_params->host_bps = params->host_bps;
+			break;
+
+		default:
+			break;
+		}
+		pipe->p_params->s_fmt = params->s_fmt;
+		pipe->p_params->ch = params->ch;
+		pipe->p_params->s_freq = params->s_freq;
+		pipe->p_params->stream = params->stream;
+		pipe->p_params->format = params->format;
+
+	} else {
+		memcpy(pipe->p_params, params, sizeof(*params));
+	}
+}
+
+/*
+ * The FE params are passed by hw_params of the DAI.
+ * On hw_params, the params are stored in Gateway module of the FE and we
+ * need to calculate the format in DSP module configuration, that
+ * conversion is done here
+ */
+int skl_tplg_update_pipe_params(struct device *dev,
+			struct skl_module_cfg *mconfig,
+			struct skl_pipe_params *params)
+{
+	struct skl_module_res *res;
+	struct skl_dev *skl = get_skl_ctx(dev);
+	struct skl_module_fmt *format = NULL;
+	u8 cfg_idx = mconfig->pipe->cur_config_idx;
+
+	res = &mconfig->module->resources[mconfig->res_idx];
+	skl_tplg_fill_dma_id(mconfig, params);
+	mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx;
+	mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx;
+
+	if (skl->nr_modules)
+		return 0;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		format = &mconfig->module->formats[mconfig->fmt_idx].inputs[0].fmt;
+	else
+		format = &mconfig->module->formats[mconfig->fmt_idx].outputs[0].fmt;
+
+	/* set the hw_params */
+	format->s_freq = params->s_freq;
+	format->channels = params->ch;
+	format->valid_bit_depth = skl_get_bit_depth(params->s_fmt);
+
+	/*
+	 * 16 bit is 16 bit container whereas 24 bit is in 32 bit
+	 * container so update bit depth accordingly
+	 */
+	switch (format->valid_bit_depth) {
+	case SKL_DEPTH_16BIT:
+		format->bit_depth = format->valid_bit_depth;
+		break;
+
+	case SKL_DEPTH_24BIT:
+	case SKL_DEPTH_32BIT:
+		format->bit_depth = SKL_DEPTH_32BIT;
+		break;
+
+	default:
+		dev_err(dev, "Invalid bit depth %x for pipe\n",
+				format->valid_bit_depth);
+		return -EINVAL;
+	}
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		res->ibs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	} else {
+		res->obs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	}
+
+	return 0;
+}
+
+/*
+ * Query the module config for the FE DAI
+ * This is used to find the hw_params set for that DAI and apply to FE
+ * pipeline
+ */
+struct skl_module_cfg *
+skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dai_get_widget(dai, stream);
+	struct snd_soc_dapm_path *p = NULL;
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		snd_soc_dapm_widget_for_each_sink_path(w, p) {
+			if (p->connect && p->sink->power &&
+				!is_skl_dsp_widget_type(p->sink, dai->dev))
+				continue;
+
+			if (p->sink->priv) {
+				dev_dbg(dai->dev, "set params for %s\n",
+						p->sink->name);
+				return p->sink->priv;
+			}
+		}
+	} else {
+		snd_soc_dapm_widget_for_each_source_path(w, p) {
+			if (p->connect && p->source->power &&
+				!is_skl_dsp_widget_type(p->source, dai->dev))
+				continue;
+
+			if (p->source->priv) {
+				dev_dbg(dai->dev, "set params for %s\n",
+						p->source->name);
+				return p->source->priv;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+static struct skl_module_cfg *skl_get_mconfig_pb_cpr(
+		struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *p;
+	struct skl_module_cfg *mconfig = NULL;
+
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		if (w->endpoints[SND_SOC_DAPM_DIR_OUT] > 0) {
+			if (p->connect &&
+				    (p->sink->id == snd_soc_dapm_aif_out) &&
+				    p->source->priv) {
+				mconfig = p->source->priv;
+				return mconfig;
+			}
+			mconfig = skl_get_mconfig_pb_cpr(dai, p->source);
+			if (mconfig)
+				return mconfig;
+		}
+	}
+	return mconfig;
+}
+
+static struct skl_module_cfg *skl_get_mconfig_cap_cpr(
+		struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w)
+{
+	struct snd_soc_dapm_path *p;
+	struct skl_module_cfg *mconfig = NULL;
+
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if (w->endpoints[SND_SOC_DAPM_DIR_IN] > 0) {
+			if (p->connect &&
+				    (p->source->id == snd_soc_dapm_aif_in) &&
+				    p->sink->priv) {
+				mconfig = p->sink->priv;
+				return mconfig;
+			}
+			mconfig = skl_get_mconfig_cap_cpr(dai, p->sink);
+			if (mconfig)
+				return mconfig;
+		}
+	}
+	return mconfig;
+}
+
+struct skl_module_cfg *
+skl_tplg_be_get_cpr_module(struct snd_soc_dai *dai, int stream)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dai_get_widget(dai, stream);
+	struct skl_module_cfg *mconfig;
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		mconfig = skl_get_mconfig_pb_cpr(dai, w);
+	} else {
+		mconfig = skl_get_mconfig_cap_cpr(dai, w);
+	}
+	return mconfig;
+}
+
+static u8 skl_tplg_be_link_type(int dev_type)
+{
+	int ret;
+
+	switch (dev_type) {
+	case SKL_DEVICE_BT:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_DMIC:
+		ret = NHLT_LINK_DMIC;
+		break;
+
+	case SKL_DEVICE_I2S:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_HDALINK:
+		ret = NHLT_LINK_HDA;
+		break;
+
+	default:
+		ret = NHLT_LINK_INVALID;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Fill the BE gateway parameters
+ * The BE gateway expects a blob of parameters which are kept in the ACPI
+ * NHLT blob, so query the blob for interface type (i2s/pdm) and instance.
+ * The port can have multiple settings so pick based on the pipeline
+ * parameters
+ */
+static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,
+				struct skl_module_cfg *mconfig,
+				struct skl_pipe_params *params)
+{
+	struct nhlt_specific_cfg *cfg;
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct skl_pipe_params save = *pipe->p_params;
+	struct skl_pipe_fmt *pipe_fmt;
+	struct skl_dev *skl = get_skl_ctx(dai->dev);
+	int link_type = skl_tplg_be_link_type(mconfig->dev_type);
+	u8 dev_type = skl_tplg_be_dev_type(mconfig->dev_type);
+	int ret;
+
+	skl_tplg_fill_dma_id(mconfig, params);
+
+	if (link_type == NHLT_LINK_HDA)
+		return 0;
+
+	*pipe->p_params = *params;
+	ret = skl_tplg_get_pipe_config(skl, mconfig);
+	if (ret)
+		goto err;
+
+	dev_dbg(skl->dev, "%s using pipe config: %d\n", __func__, pipe->cur_config_idx);
+	if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK)
+		pipe_fmt = &pipe->configs[pipe->cur_config_idx].out_fmt;
+	else
+		pipe_fmt = &pipe->configs[pipe->cur_config_idx].in_fmt;
+
+	/* update the blob based on virtual bus_id*/
+	cfg = intel_nhlt_get_endpoint_blob(dai->dev, skl->nhlt,
+					mconfig->vbus_id, link_type,
+					pipe_fmt->bps, params->s_cont,
+					pipe_fmt->channels, pipe_fmt->freq,
+					pipe->direction, dev_type);
+	if (cfg) {
+		mconfig->formats_config[SKL_PARAM_INIT].caps_size = cfg->size;
+		mconfig->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps;
+	} else {
+		dev_err(dai->dev, "Blob NULL for id:%d type:%d dirn:%d ch:%d, freq:%d, fmt:%d\n",
+			mconfig->vbus_id, link_type, params->stream,
+			params->ch, params->s_freq, params->s_fmt);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	*pipe->p_params = save;
+	return ret;
+}
+
+static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai,
+				struct snd_soc_dapm_widget *w,
+				struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p;
+	int ret = -EIO;
+
+	snd_soc_dapm_widget_for_each_source_path(w, p) {
+		if (p->connect && is_skl_dsp_widget_type(p->source, dai->dev) &&
+						p->source->priv) {
+
+			ret = skl_tplg_be_fill_pipe_params(dai,
+						p->source->priv, params);
+			if (ret < 0)
+				return ret;
+		} else {
+			ret = skl_tplg_be_set_src_pipe_params(dai,
+						p->source, params);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai,
+	struct snd_soc_dapm_widget *w, struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p;
+	int ret = -EIO;
+
+	snd_soc_dapm_widget_for_each_sink_path(w, p) {
+		if (p->connect && is_skl_dsp_widget_type(p->sink, dai->dev) &&
+						p->sink->priv) {
+
+			ret = skl_tplg_be_fill_pipe_params(dai,
+						p->sink->priv, params);
+			if (ret < 0)
+				return ret;
+		} else {
+			ret = skl_tplg_be_set_sink_pipe_params(
+						dai, p->sink, params);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * BE hw_params can be a source parameters (capture) or sink parameters
+ * (playback). Based on sink and source we need to either find the source
+ * list or the sink list and set the pipeline parameters
+ */
+int skl_tplg_be_update_params(struct snd_soc_dai *dai,
+				struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_widget *w = snd_soc_dai_get_widget(dai, params->stream);
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		return skl_tplg_be_set_src_pipe_params(dai, w, params);
+	} else {
+		return skl_tplg_be_set_sink_pipe_params(dai, w, params);
+	}
+}
+
+static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = {
+	{SKL_MIXER_EVENT, skl_tplg_mixer_event},
+	{SKL_VMIXER_EVENT, skl_tplg_mixer_event},
+	{SKL_PGA_EVENT, skl_tplg_pga_event},
+};
+
+static const struct snd_soc_tplg_bytes_ext_ops skl_tlv_ops[] = {
+	{SKL_CONTROL_TYPE_BYTE_TLV, skl_tplg_tlv_control_get,
+					skl_tplg_tlv_control_set},
+};
+
+static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = {
+	{
+		.id = SKL_CONTROL_TYPE_MIC_SELECT,
+		.get = skl_tplg_mic_control_get,
+		.put = skl_tplg_mic_control_set,
+	},
+	{
+		.id = SKL_CONTROL_TYPE_MULTI_IO_SELECT,
+		.get = skl_tplg_multi_config_get,
+		.put = skl_tplg_multi_config_set,
+	},
+	{
+		.id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC,
+		.get = skl_tplg_multi_config_get_dmic,
+		.put = skl_tplg_multi_config_set_dmic,
+	}
+};
+
+static int skl_tplg_fill_pipe_cfg(struct device *dev,
+			struct skl_pipe *pipe, u32 tkn,
+			u32 tkn_val, int conf_idx, int dir)
+{
+	struct skl_pipe_fmt *fmt;
+	struct skl_path_config *config;
+
+	switch (dir) {
+	case SKL_DIR_IN:
+		fmt = &pipe->configs[conf_idx].in_fmt;
+		break;
+
+	case SKL_DIR_OUT:
+		fmt = &pipe->configs[conf_idx].out_fmt;
+		break;
+
+	default:
+		dev_err(dev, "Invalid direction: %d\n", dir);
+		return -EINVAL;
+	}
+
+	config = &pipe->configs[conf_idx];
+
+	switch (tkn) {
+	case SKL_TKN_U32_CFG_FREQ:
+		fmt->freq = tkn_val;
+		break;
+
+	case SKL_TKN_U8_CFG_CHAN:
+		fmt->channels = tkn_val;
+		break;
+
+	case SKL_TKN_U8_CFG_BPS:
+		fmt->bps = tkn_val;
+		break;
+
+	case SKL_TKN_U32_PATH_MEM_PGS:
+		config->mem_pages = tkn_val;
+		break;
+
+	default:
+		dev_err(dev, "Invalid token config: %d\n", tkn);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_fill_pipe_tkn(struct device *dev,
+			struct skl_pipe *pipe, u32 tkn,
+			u32 tkn_val)
+{
+
+	switch (tkn) {
+	case SKL_TKN_U32_PIPE_CONN_TYPE:
+		pipe->conn_type = tkn_val;
+		break;
+
+	case SKL_TKN_U32_PIPE_PRIORITY:
+		pipe->pipe_priority = tkn_val;
+		break;
+
+	case SKL_TKN_U32_PIPE_MEM_PGS:
+		pipe->memory_pages = tkn_val;
+		break;
+
+	case SKL_TKN_U32_PMODE:
+		pipe->lp_mode = tkn_val;
+		break;
+
+	case SKL_TKN_U32_PIPE_DIRECTION:
+		pipe->direction = tkn_val;
+		break;
+
+	case SKL_TKN_U32_NUM_CONFIGS:
+		pipe->nr_cfgs = tkn_val;
+		break;
+
+	default:
+		dev_err(dev, "Token not handled %d\n", tkn);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Add pipeline by parsing the relevant tokens
+ * Return an existing pipe if the pipe already exists.
+ */
+static int skl_tplg_add_pipe(struct device *dev,
+		struct skl_module_cfg *mconfig, struct skl_dev *skl,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem)
+{
+	struct skl_pipeline *ppl;
+	struct skl_pipe *pipe;
+	struct skl_pipe_params *params;
+
+	list_for_each_entry(ppl, &skl->ppl_list, node) {
+		if (ppl->pipe->ppl_id == tkn_elem->value) {
+			mconfig->pipe = ppl->pipe;
+			return -EEXIST;
+		}
+	}
+
+	ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL);
+	if (!ppl)
+		return -ENOMEM;
+
+	pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL);
+	if (!pipe)
+		return -ENOMEM;
+
+	params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	pipe->p_params = params;
+	pipe->ppl_id = tkn_elem->value;
+	INIT_LIST_HEAD(&pipe->w_list);
+
+	ppl->pipe = pipe;
+	list_add(&ppl->node, &skl->ppl_list);
+
+	mconfig->pipe = pipe;
+	mconfig->pipe->state = SKL_PIPE_INVALID;
+
+	return 0;
+}
+
+static int skl_tplg_get_uuid(struct device *dev, guid_t *guid,
+	      struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn)
+{
+	if (uuid_tkn->token == SKL_TKN_UUID) {
+		import_guid(guid, uuid_tkn->uuid);
+		return 0;
+	}
+
+	dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token);
+
+	return -EINVAL;
+}
+
+static int skl_tplg_fill_pin(struct device *dev,
+			struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+			struct skl_module_pin *m_pin,
+			int pin_index)
+{
+	int ret;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_U32_PIN_MOD_ID:
+		m_pin[pin_index].id.module_id = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_PIN_INST_ID:
+		m_pin[pin_index].id.instance_id = tkn_elem->value;
+		break;
+
+	case SKL_TKN_UUID:
+		ret = skl_tplg_get_uuid(dev, &m_pin[pin_index].id.mod_uuid,
+			(struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem);
+		if (ret < 0)
+			return ret;
+
+		break;
+
+	default:
+		dev_err(dev, "%d Not a pin token\n", tkn_elem->token);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Parse for pin config specific tokens to fill up the
+ * module private data
+ */
+static int skl_tplg_fill_pins_info(struct device *dev,
+		struct skl_module_cfg *mconfig,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		int dir, int pin_count)
+{
+	int ret;
+	struct skl_module_pin *m_pin;
+
+	switch (dir) {
+	case SKL_DIR_IN:
+		m_pin = mconfig->m_in_pin;
+		break;
+
+	case SKL_DIR_OUT:
+		m_pin = mconfig->m_out_pin;
+		break;
+
+	default:
+		dev_err(dev, "Invalid direction value\n");
+		return -EINVAL;
+	}
+
+	ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count);
+	if (ret < 0)
+		return ret;
+
+	m_pin[pin_count].in_use = false;
+	m_pin[pin_count].pin_state = SKL_PIN_UNBIND;
+
+	return 0;
+}
+
+/*
+ * Fill up input/output module config format based
+ * on the direction
+ */
+static int skl_tplg_fill_fmt(struct device *dev,
+		struct skl_module_fmt *dst_fmt,
+		u32 tkn, u32 value)
+{
+	switch (tkn) {
+	case SKL_TKN_U32_FMT_CH:
+		dst_fmt->channels  = value;
+		break;
+
+	case SKL_TKN_U32_FMT_FREQ:
+		dst_fmt->s_freq = value;
+		break;
+
+	case SKL_TKN_U32_FMT_BIT_DEPTH:
+		dst_fmt->bit_depth = value;
+		break;
+
+	case SKL_TKN_U32_FMT_SAMPLE_SIZE:
+		dst_fmt->valid_bit_depth = value;
+		break;
+
+	case SKL_TKN_U32_FMT_CH_CONFIG:
+		dst_fmt->ch_cfg = value;
+		break;
+
+	case SKL_TKN_U32_FMT_INTERLEAVE:
+		dst_fmt->interleaving_style = value;
+		break;
+
+	case SKL_TKN_U32_FMT_SAMPLE_TYPE:
+		dst_fmt->sample_type = value;
+		break;
+
+	case SKL_TKN_U32_FMT_CH_MAP:
+		dst_fmt->ch_map = value;
+		break;
+
+	default:
+		dev_err(dev, "Invalid token %d\n", tkn);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_widget_fill_fmt(struct device *dev,
+		struct skl_module_iface *fmt,
+		u32 tkn, u32 val, u32 dir, int fmt_idx)
+{
+	struct skl_module_fmt *dst_fmt;
+
+	if (!fmt)
+		return -EINVAL;
+
+	switch (dir) {
+	case SKL_DIR_IN:
+		dst_fmt = &fmt->inputs[fmt_idx].fmt;
+		break;
+
+	case SKL_DIR_OUT:
+		dst_fmt = &fmt->outputs[fmt_idx].fmt;
+		break;
+
+	default:
+		dev_err(dev, "Invalid direction: %d\n", dir);
+		return -EINVAL;
+	}
+
+	return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val);
+}
+
+static void skl_tplg_fill_pin_dynamic_val(
+		struct skl_module_pin *mpin, u32 pin_count, u32 value)
+{
+	int i;
+
+	for (i = 0; i < pin_count; i++)
+		mpin[i].is_dynamic = value;
+}
+
+/*
+ * Resource table in the manifest has pin specific resources
+ * like pin and pin buffer size
+ */
+static int skl_tplg_manifest_pin_res_tkn(struct device *dev,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		struct skl_module_res *res, int pin_idx, int dir)
+{
+	struct skl_module_pin_resources *m_pin;
+
+	switch (dir) {
+	case SKL_DIR_IN:
+		m_pin = &res->input[pin_idx];
+		break;
+
+	case SKL_DIR_OUT:
+		m_pin = &res->output[pin_idx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid pin direction: %d\n", dir);
+		return -EINVAL;
+	}
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_MM_U32_RES_PIN_ID:
+		m_pin->pin_index = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_PIN_BUF:
+		m_pin->buf_size = tkn_elem->value;
+		break;
+
+	default:
+		dev_err(dev, "Invalid token: %d\n", tkn_elem->token);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Fill module specific resources from the manifest's resource
+ * table like CPS, DMA size, mem_pages.
+ */
+static int skl_tplg_fill_res_tkn(struct device *dev,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		struct skl_module_res *res,
+		int pin_idx, int dir)
+{
+	int ret, tkn_count = 0;
+
+	if (!res)
+		return -EINVAL;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_MM_U32_DMA_SIZE:
+		res->dma_buffer_size = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_CPC:
+		res->cpc = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_MEM_PAGES:
+		res->is_pages = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_OBS:
+		res->obs = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_IBS:
+		res->ibs = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_RES_PIN_ID:
+	case SKL_TKN_MM_U32_PIN_BUF:
+		ret = skl_tplg_manifest_pin_res_tkn(dev, tkn_elem, res,
+						    pin_idx, dir);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case SKL_TKN_MM_U32_CPS:
+	case SKL_TKN_U32_MAX_MCPS:
+		/* ignore unused tokens */
+		break;
+
+	default:
+		dev_err(dev, "Not a res type token: %d", tkn_elem->token);
+		return -EINVAL;
+
+	}
+	tkn_count++;
+
+	return tkn_count;
+}
+
+/*
+ * Parse tokens to fill up the module private data
+ */
+static int skl_tplg_get_token(struct device *dev,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		struct skl_dev *skl, struct skl_module_cfg *mconfig)
+{
+	int tkn_count = 0;
+	int ret;
+	static int is_pipe_exists;
+	static int pin_index, dir, conf_idx;
+	struct skl_module_iface *iface = NULL;
+	struct skl_module_res *res = NULL;
+	int res_idx = mconfig->res_idx;
+	int fmt_idx = mconfig->fmt_idx;
+
+	/*
+	 * If the manifest structure contains no modules, fill all
+	 * the module data to 0th index.
+	 * res_idx and fmt_idx are default set to 0.
+	 */
+	if (skl->nr_modules == 0) {
+		res = &mconfig->module->resources[res_idx];
+		iface = &mconfig->module->formats[fmt_idx];
+	}
+
+	if (tkn_elem->token > SKL_TKN_MAX)
+		return -EINVAL;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_U8_IN_QUEUE_COUNT:
+		mconfig->module->max_input_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_OUT_QUEUE_COUNT:
+		mconfig->module->max_output_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_DYN_IN_PIN:
+		if (!mconfig->m_in_pin)
+			mconfig->m_in_pin =
+				devm_kcalloc(dev, MAX_IN_QUEUE,
+					     sizeof(*mconfig->m_in_pin),
+					     GFP_KERNEL);
+		if (!mconfig->m_in_pin)
+			return -ENOMEM;
+
+		skl_tplg_fill_pin_dynamic_val(mconfig->m_in_pin, MAX_IN_QUEUE,
+					      tkn_elem->value);
+		break;
+
+	case SKL_TKN_U8_DYN_OUT_PIN:
+		if (!mconfig->m_out_pin)
+			mconfig->m_out_pin =
+				devm_kcalloc(dev, MAX_IN_QUEUE,
+					     sizeof(*mconfig->m_in_pin),
+					     GFP_KERNEL);
+		if (!mconfig->m_out_pin)
+			return -ENOMEM;
+
+		skl_tplg_fill_pin_dynamic_val(mconfig->m_out_pin, MAX_OUT_QUEUE,
+					      tkn_elem->value);
+		break;
+
+	case SKL_TKN_U8_TIME_SLOT:
+		mconfig->time_slot = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_CORE_ID:
+		mconfig->core_id = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_MOD_TYPE:
+		mconfig->m_type = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_DEV_TYPE:
+		mconfig->dev_type = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_HW_CONN_TYPE:
+		mconfig->hw_conn_type = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U16_MOD_INST_ID:
+		mconfig->id.instance_id =
+		tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_MEM_PAGES:
+	case SKL_TKN_U32_MAX_MCPS:
+	case SKL_TKN_U32_OBS:
+	case SKL_TKN_U32_IBS:
+		ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_index, dir);
+		if (ret < 0)
+			return ret;
+
+		break;
+
+	case SKL_TKN_U32_VBUS_ID:
+		mconfig->vbus_id = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_PARAMS_FIXUP:
+		mconfig->params_fixup = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_CONVERTER:
+		mconfig->converter = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_D0I3_CAPS:
+		mconfig->d0i3_caps = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_PIPE_ID:
+		ret = skl_tplg_add_pipe(dev,
+				mconfig, skl, tkn_elem);
+
+		if (ret < 0) {
+			if (ret == -EEXIST) {
+				is_pipe_exists = 1;
+				break;
+			}
+			return is_pipe_exists;
+		}
+
+		break;
+
+	case SKL_TKN_U32_PIPE_CONFIG_ID:
+		conf_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_PIPE_CONN_TYPE:
+	case SKL_TKN_U32_PIPE_PRIORITY:
+	case SKL_TKN_U32_PIPE_MEM_PGS:
+	case SKL_TKN_U32_PMODE:
+	case SKL_TKN_U32_PIPE_DIRECTION:
+	case SKL_TKN_U32_NUM_CONFIGS:
+		if (is_pipe_exists) {
+			ret = skl_tplg_fill_pipe_tkn(dev, mconfig->pipe,
+					tkn_elem->token, tkn_elem->value);
+			if (ret < 0)
+				return ret;
+		}
+
+		break;
+
+	case SKL_TKN_U32_PATH_MEM_PGS:
+	case SKL_TKN_U32_CFG_FREQ:
+	case SKL_TKN_U8_CFG_CHAN:
+	case SKL_TKN_U8_CFG_BPS:
+		if (mconfig->pipe->nr_cfgs) {
+			ret = skl_tplg_fill_pipe_cfg(dev, mconfig->pipe,
+					tkn_elem->token, tkn_elem->value,
+					conf_idx, dir);
+			if (ret < 0)
+				return ret;
+		}
+		break;
+
+	case SKL_TKN_CFG_MOD_RES_ID:
+		mconfig->mod_cfg[conf_idx].res_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_CFG_MOD_FMT_ID:
+		mconfig->mod_cfg[conf_idx].fmt_idx = tkn_elem->value;
+		break;
+
+	/*
+	 * SKL_TKN_U32_DIR_PIN_COUNT token has the value for both
+	 * direction and the pin count. The first four bits represent
+	 * direction and next four the pin count.
+	 */
+	case SKL_TKN_U32_DIR_PIN_COUNT:
+		dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK;
+		pin_index = (tkn_elem->value &
+			SKL_PIN_COUNT_MASK) >> 4;
+
+		break;
+
+	case SKL_TKN_U32_FMT_CH:
+	case SKL_TKN_U32_FMT_FREQ:
+	case SKL_TKN_U32_FMT_BIT_DEPTH:
+	case SKL_TKN_U32_FMT_SAMPLE_SIZE:
+	case SKL_TKN_U32_FMT_CH_CONFIG:
+	case SKL_TKN_U32_FMT_INTERLEAVE:
+	case SKL_TKN_U32_FMT_SAMPLE_TYPE:
+	case SKL_TKN_U32_FMT_CH_MAP:
+		ret = skl_tplg_widget_fill_fmt(dev, iface, tkn_elem->token,
+				tkn_elem->value, dir, pin_index);
+
+		if (ret < 0)
+			return ret;
+
+		break;
+
+	case SKL_TKN_U32_PIN_MOD_ID:
+	case SKL_TKN_U32_PIN_INST_ID:
+	case SKL_TKN_UUID:
+		ret = skl_tplg_fill_pins_info(dev,
+				mconfig, tkn_elem, dir,
+				pin_index);
+		if (ret < 0)
+			return ret;
+
+		break;
+
+	case SKL_TKN_U32_FMT_CFG_IDX:
+		if (tkn_elem->value > SKL_MAX_PARAMS_TYPES)
+			return -EINVAL;
+
+		mconfig->fmt_cfg_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_CAPS_SIZE:
+		mconfig->formats_config[mconfig->fmt_cfg_idx].caps_size =
+			tkn_elem->value;
+
+		break;
+
+	case SKL_TKN_U32_CAPS_SET_PARAMS:
+		mconfig->formats_config[mconfig->fmt_cfg_idx].set_params =
+				tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_CAPS_PARAMS_ID:
+		mconfig->formats_config[mconfig->fmt_cfg_idx].param_id =
+				tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_PROC_DOMAIN:
+		mconfig->domain =
+			tkn_elem->value;
+
+		break;
+
+	case SKL_TKN_U32_DMA_BUF_SIZE:
+		mconfig->dma_buffer_size = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_IN_PIN_TYPE:
+	case SKL_TKN_U8_OUT_PIN_TYPE:
+	case SKL_TKN_U8_CONN_TYPE:
+		break;
+
+	default:
+		dev_err(dev, "Token %d not handled\n",
+				tkn_elem->token);
+		return -EINVAL;
+	}
+
+	tkn_count++;
+
+	return tkn_count;
+}
+
+/*
+ * Parse the vendor array for specific tokens to construct
+ * module private data
+ */
+static int skl_tplg_get_tokens(struct device *dev,
+		char *pvt_data,	struct skl_dev *skl,
+		struct skl_module_cfg *mconfig, int block_size)
+{
+	struct snd_soc_tplg_vendor_array *array;
+	struct snd_soc_tplg_vendor_value_elem *tkn_elem;
+	int tkn_count = 0, ret;
+	int off = 0, tuple_size = 0;
+	bool is_module_guid = true;
+
+	if (block_size <= 0)
+		return -EINVAL;
+
+	while (tuple_size < block_size) {
+		array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off);
+
+		off += array->size;
+
+		switch (array->type) {
+		case SND_SOC_TPLG_TUPLE_TYPE_STRING:
+			dev_warn(dev, "no string tokens expected for skl tplg\n");
+			continue;
+
+		case SND_SOC_TPLG_TUPLE_TYPE_UUID:
+			if (is_module_guid) {
+				ret = skl_tplg_get_uuid(dev, (guid_t *)mconfig->guid,
+							array->uuid);
+				is_module_guid = false;
+			} else {
+				ret = skl_tplg_get_token(dev, array->value, skl,
+							 mconfig);
+			}
+
+			if (ret < 0)
+				return ret;
+
+			tuple_size += sizeof(*array->uuid);
+
+			continue;
+
+		default:
+			tkn_elem = array->value;
+			tkn_count = 0;
+			break;
+		}
+
+		while (tkn_count <= (array->num_elems - 1)) {
+			ret = skl_tplg_get_token(dev, tkn_elem,
+					skl, mconfig);
+
+			if (ret < 0)
+				return ret;
+
+			tkn_count = tkn_count + ret;
+			tkn_elem++;
+		}
+
+		tuple_size += tkn_count * sizeof(*tkn_elem);
+	}
+
+	return off;
+}
+
+/*
+ * Every data block is preceded by a descriptor to read the number
+ * of data blocks, they type of the block and it's size
+ */
+static int skl_tplg_get_desc_blocks(struct device *dev,
+		struct snd_soc_tplg_vendor_array *array)
+{
+	struct snd_soc_tplg_vendor_value_elem *tkn_elem;
+
+	tkn_elem = array->value;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_U8_NUM_BLOCKS:
+	case SKL_TKN_U8_BLOCK_TYPE:
+	case SKL_TKN_U16_BLOCK_SIZE:
+		return tkn_elem->value;
+
+	default:
+		dev_err(dev, "Invalid descriptor token %d\n", tkn_elem->token);
+		break;
+	}
+
+	return -EINVAL;
+}
+
+/* Functions to parse private data from configuration file format v4 */
+
+/*
+ * Add pipeline from topology binary into driver pipeline list
+ *
+ * If already added we return that instance
+ * Otherwise we create a new instance and add into driver list
+ */
+static int skl_tplg_add_pipe_v4(struct device *dev,
+			struct skl_module_cfg *mconfig, struct skl_dev *skl,
+			struct skl_dfw_v4_pipe *dfw_pipe)
+{
+	struct skl_pipeline *ppl;
+	struct skl_pipe *pipe;
+	struct skl_pipe_params *params;
+
+	list_for_each_entry(ppl, &skl->ppl_list, node) {
+		if (ppl->pipe->ppl_id == dfw_pipe->pipe_id) {
+			mconfig->pipe = ppl->pipe;
+			return 0;
+		}
+	}
+
+	ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL);
+	if (!ppl)
+		return -ENOMEM;
+
+	pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL);
+	if (!pipe)
+		return -ENOMEM;
+
+	params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	pipe->ppl_id = dfw_pipe->pipe_id;
+	pipe->memory_pages = dfw_pipe->memory_pages;
+	pipe->pipe_priority = dfw_pipe->pipe_priority;
+	pipe->conn_type = dfw_pipe->conn_type;
+	pipe->state = SKL_PIPE_INVALID;
+	pipe->p_params = params;
+	INIT_LIST_HEAD(&pipe->w_list);
+
+	ppl->pipe = pipe;
+	list_add(&ppl->node, &skl->ppl_list);
+
+	mconfig->pipe = pipe;
+
+	return 0;
+}
+
+static void skl_fill_module_pin_info_v4(struct skl_dfw_v4_module_pin *dfw_pin,
+					struct skl_module_pin *m_pin,
+					bool is_dynamic, int max_pin)
+{
+	int i;
+
+	for (i = 0; i < max_pin; i++) {
+		m_pin[i].id.module_id = dfw_pin[i].module_id;
+		m_pin[i].id.instance_id = dfw_pin[i].instance_id;
+		m_pin[i].in_use = false;
+		m_pin[i].is_dynamic = is_dynamic;
+		m_pin[i].pin_state = SKL_PIN_UNBIND;
+	}
+}
+
+static void skl_tplg_fill_fmt_v4(struct skl_module_pin_fmt *dst_fmt,
+				 struct skl_dfw_v4_module_fmt *src_fmt,
+				 int pins)
+{
+	int i;
+
+	for (i = 0; i < pins; i++) {
+		dst_fmt[i].fmt.channels  = src_fmt[i].channels;
+		dst_fmt[i].fmt.s_freq = src_fmt[i].freq;
+		dst_fmt[i].fmt.bit_depth = src_fmt[i].bit_depth;
+		dst_fmt[i].fmt.valid_bit_depth = src_fmt[i].valid_bit_depth;
+		dst_fmt[i].fmt.ch_cfg = src_fmt[i].ch_cfg;
+		dst_fmt[i].fmt.ch_map = src_fmt[i].ch_map;
+		dst_fmt[i].fmt.interleaving_style =
+						src_fmt[i].interleaving_style;
+		dst_fmt[i].fmt.sample_type = src_fmt[i].sample_type;
+	}
+}
+
+static int skl_tplg_get_pvt_data_v4(struct snd_soc_tplg_dapm_widget *tplg_w,
+				    struct skl_dev *skl, struct device *dev,
+				    struct skl_module_cfg *mconfig)
+{
+	struct skl_dfw_v4_module *dfw =
+				(struct skl_dfw_v4_module *)tplg_w->priv.data;
+	int ret;
+	int idx = mconfig->fmt_cfg_idx;
+
+	dev_dbg(dev, "Parsing Skylake v4 widget topology data\n");
+
+	ret = guid_parse(dfw->uuid, (guid_t *)mconfig->guid);
+	if (ret)
+		return ret;
+	mconfig->id.module_id = -1;
+	mconfig->id.instance_id = dfw->instance_id;
+	mconfig->module->resources[0].cpc = dfw->max_mcps / 1000;
+	mconfig->module->resources[0].ibs = dfw->ibs;
+	mconfig->module->resources[0].obs = dfw->obs;
+	mconfig->core_id = dfw->core_id;
+	mconfig->module->max_input_pins = dfw->max_in_queue;
+	mconfig->module->max_output_pins = dfw->max_out_queue;
+	mconfig->module->loadable = dfw->is_loadable;
+	skl_tplg_fill_fmt_v4(mconfig->module->formats[0].inputs, dfw->in_fmt,
+			     MAX_IN_QUEUE);
+	skl_tplg_fill_fmt_v4(mconfig->module->formats[0].outputs, dfw->out_fmt,
+			     MAX_OUT_QUEUE);
+
+	mconfig->params_fixup = dfw->params_fixup;
+	mconfig->converter = dfw->converter;
+	mconfig->m_type = dfw->module_type;
+	mconfig->vbus_id = dfw->vbus_id;
+	mconfig->module->resources[0].is_pages = dfw->mem_pages;
+
+	ret = skl_tplg_add_pipe_v4(dev, mconfig, skl, &dfw->pipe);
+	if (ret)
+		return ret;
+
+	mconfig->dev_type = dfw->dev_type;
+	mconfig->hw_conn_type = dfw->hw_conn_type;
+	mconfig->time_slot = dfw->time_slot;
+	mconfig->formats_config[idx].caps_size = dfw->caps.caps_size;
+
+	mconfig->m_in_pin = devm_kcalloc(dev,
+				MAX_IN_QUEUE, sizeof(*mconfig->m_in_pin),
+				GFP_KERNEL);
+	if (!mconfig->m_in_pin)
+		return -ENOMEM;
+
+	mconfig->m_out_pin = devm_kcalloc(dev,
+				MAX_OUT_QUEUE, sizeof(*mconfig->m_out_pin),
+				GFP_KERNEL);
+	if (!mconfig->m_out_pin)
+		return -ENOMEM;
+
+	skl_fill_module_pin_info_v4(dfw->in_pin, mconfig->m_in_pin,
+				    dfw->is_dynamic_in_pin,
+				    mconfig->module->max_input_pins);
+	skl_fill_module_pin_info_v4(dfw->out_pin, mconfig->m_out_pin,
+				    dfw->is_dynamic_out_pin,
+				    mconfig->module->max_output_pins);
+
+	if (mconfig->formats_config[idx].caps_size) {
+		mconfig->formats_config[idx].set_params = dfw->caps.set_params;
+		mconfig->formats_config[idx].param_id = dfw->caps.param_id;
+		mconfig->formats_config[idx].caps =
+		devm_kzalloc(dev, mconfig->formats_config[idx].caps_size,
+			     GFP_KERNEL);
+		if (!mconfig->formats_config[idx].caps)
+			return -ENOMEM;
+		memcpy(mconfig->formats_config[idx].caps, dfw->caps.caps,
+		       dfw->caps.caps_size);
+	}
+
+	return 0;
+}
+
+static int skl_tplg_get_caps_data(struct device *dev, char *data,
+				  struct skl_module_cfg *mconfig)
+{
+	int idx = mconfig->fmt_cfg_idx;
+
+	if (mconfig->formats_config[idx].caps_size > 0) {
+		mconfig->formats_config[idx].caps =
+			devm_kzalloc(dev, mconfig->formats_config[idx].caps_size,
+				     GFP_KERNEL);
+		if (!mconfig->formats_config[idx].caps)
+			return -ENOMEM;
+		memcpy(mconfig->formats_config[idx].caps, data,
+		       mconfig->formats_config[idx].caps_size);
+	}
+
+	return mconfig->formats_config[idx].caps_size;
+}
+
+/*
+ * Parse the private data for the token and corresponding value.
+ * The private data can have multiple data blocks. So, a data block
+ * is preceded by a descriptor for number of blocks and a descriptor
+ * for the type and size of the suceeding data block.
+ */
+static int skl_tplg_get_pvt_data(struct snd_soc_tplg_dapm_widget *tplg_w,
+				struct skl_dev *skl, struct device *dev,
+				struct skl_module_cfg *mconfig)
+{
+	struct snd_soc_tplg_vendor_array *array;
+	int num_blocks, block_size, block_type, off = 0;
+	char *data;
+	int ret;
+
+	/*
+	 * v4 configuration files have a valid UUID at the start of
+	 * the widget's private data.
+	 */
+	if (uuid_is_valid((char *)tplg_w->priv.data))
+		return skl_tplg_get_pvt_data_v4(tplg_w, skl, dev, mconfig);
+
+	/* Read the NUM_DATA_BLOCKS descriptor */
+	array = (struct snd_soc_tplg_vendor_array *)tplg_w->priv.data;
+	ret = skl_tplg_get_desc_blocks(dev, array);
+	if (ret < 0)
+		return ret;
+	num_blocks = ret;
+
+	off += array->size;
+	/* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */
+	while (num_blocks > 0) {
+		array = (struct snd_soc_tplg_vendor_array *)
+				(tplg_w->priv.data + off);
+
+		ret = skl_tplg_get_desc_blocks(dev, array);
+
+		if (ret < 0)
+			return ret;
+		block_type = ret;
+		off += array->size;
+
+		array = (struct snd_soc_tplg_vendor_array *)
+			(tplg_w->priv.data + off);
+
+		ret = skl_tplg_get_desc_blocks(dev, array);
+
+		if (ret < 0)
+			return ret;
+		block_size = ret;
+		off += array->size;
+
+		data = (tplg_w->priv.data + off);
+
+		if (block_type == SKL_TYPE_TUPLE) {
+			ret = skl_tplg_get_tokens(dev, data,
+					skl, mconfig, block_size);
+		} else {
+			ret = skl_tplg_get_caps_data(dev, data, mconfig);
+		}
+
+		if (ret < 0)
+			return ret;
+
+		--num_blocks;
+		off += ret;
+	}
+
+	return 0;
+}
+
+static void skl_clear_pin_config(struct snd_soc_component *component,
+				struct snd_soc_dapm_widget *w)
+{
+	int i;
+	struct skl_module_cfg *mconfig;
+	struct skl_pipe *pipe;
+
+	if (!strncmp(w->dapm->component->name, component->name,
+					strlen(component->name))) {
+		mconfig = w->priv;
+		pipe = mconfig->pipe;
+		for (i = 0; i < mconfig->module->max_input_pins; i++) {
+			mconfig->m_in_pin[i].in_use = false;
+			mconfig->m_in_pin[i].pin_state = SKL_PIN_UNBIND;
+		}
+		for (i = 0; i < mconfig->module->max_output_pins; i++) {
+			mconfig->m_out_pin[i].in_use = false;
+			mconfig->m_out_pin[i].pin_state = SKL_PIN_UNBIND;
+		}
+		pipe->state = SKL_PIPE_INVALID;
+		mconfig->m_state = SKL_MODULE_UNINIT;
+	}
+}
+
+void skl_cleanup_resources(struct skl_dev *skl)
+{
+	struct snd_soc_component *soc_component = skl->component;
+	struct snd_soc_dapm_widget *w;
+	struct snd_soc_card *card;
+
+	if (soc_component == NULL)
+		return;
+
+	card = soc_component->card;
+	if (!snd_soc_card_is_instantiated(card))
+		return;
+
+	list_for_each_entry(w, &card->widgets, list) {
+		if (is_skl_dsp_widget_type(w, skl->dev) && w->priv != NULL)
+			skl_clear_pin_config(soc_component, w);
+	}
+
+	skl_clear_module_cnt(skl->dsp);
+}
+
+/*
+ * Topology core widget load callback
+ *
+ * This is used to save the private data for each widget which gives
+ * information to the driver about module and pipeline parameters which DSP
+ * FW expects like ids, resource values, formats etc
+ */
+static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, int index,
+				struct snd_soc_dapm_widget *w,
+				struct snd_soc_tplg_dapm_widget *tplg_w)
+{
+	int ret;
+	struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt);
+	struct skl_dev *skl = bus_to_skl(bus);
+	struct skl_module_cfg *mconfig;
+
+	if (!tplg_w->priv.size)
+		goto bind_event;
+
+	mconfig = devm_kzalloc(bus->dev, sizeof(*mconfig), GFP_KERNEL);
+
+	if (!mconfig)
+		return -ENOMEM;
+
+	if (skl->nr_modules == 0) {
+		mconfig->module = devm_kzalloc(bus->dev,
+				sizeof(*mconfig->module), GFP_KERNEL);
+		if (!mconfig->module)
+			return -ENOMEM;
+	}
+
+	w->priv = mconfig;
+
+	/*
+	 * module binary can be loaded later, so set it to query when
+	 * module is load for a use case
+	 */
+	mconfig->id.module_id = -1;
+
+	/* To provide backward compatibility, set default as SKL_PARAM_INIT */
+	mconfig->fmt_cfg_idx = SKL_PARAM_INIT;
+
+	/* Parse private data for tuples */
+	ret = skl_tplg_get_pvt_data(tplg_w, skl, bus->dev, mconfig);
+	if (ret < 0)
+		return ret;
+
+	skl_debug_init_module(skl->debugfs, w, mconfig);
+
+bind_event:
+	if (tplg_w->event_type == 0) {
+		dev_dbg(bus->dev, "ASoC: No event handler required\n");
+		return 0;
+	}
+
+	ret = snd_soc_tplg_widget_bind_event(w, skl_tplg_widget_ops,
+					ARRAY_SIZE(skl_tplg_widget_ops),
+					tplg_w->event_type);
+
+	if (ret) {
+		dev_err(bus->dev, "%s: No matching event handlers found for %d\n",
+					__func__, tplg_w->event_type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_init_algo_data(struct device *dev, struct soc_bytes_ext *be,
+					struct snd_soc_tplg_bytes_control *bc)
+{
+	struct skl_algo_data *ac;
+	struct skl_dfw_algo_data *dfw_ac =
+				(struct skl_dfw_algo_data *)bc->priv.data;
+
+	ac = devm_kzalloc(dev, sizeof(*ac), GFP_KERNEL);
+	if (!ac)
+		return -ENOMEM;
+
+	/* Fill private data */
+	ac->max = dfw_ac->max;
+	ac->param_id = dfw_ac->param_id;
+	ac->set_params = dfw_ac->set_params;
+	ac->size = dfw_ac->max;
+
+	if (ac->max) {
+		ac->params = devm_kzalloc(dev, ac->max, GFP_KERNEL);
+		if (!ac->params)
+			return -ENOMEM;
+
+		memcpy(ac->params, dfw_ac->params, ac->max);
+	}
+
+	be->dobj.private  = ac;
+	return 0;
+}
+
+static int skl_init_enum_data(struct device *dev, struct soc_enum *se,
+				struct snd_soc_tplg_enum_control *ec)
+{
+
+	void *data;
+
+	if (ec->priv.size) {
+		data = devm_kzalloc(dev, sizeof(ec->priv.size), GFP_KERNEL);
+		if (!data)
+			return -ENOMEM;
+		memcpy(data, ec->priv.data, ec->priv.size);
+		se->dobj.private = data;
+	}
+
+	return 0;
+
+}
+
+static int skl_tplg_control_load(struct snd_soc_component *cmpnt,
+				int index,
+				struct snd_kcontrol_new *kctl,
+				struct snd_soc_tplg_ctl_hdr *hdr)
+{
+	struct soc_bytes_ext *sb;
+	struct snd_soc_tplg_bytes_control *tplg_bc;
+	struct snd_soc_tplg_enum_control *tplg_ec;
+	struct hdac_bus *bus  = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *se;
+
+	switch (hdr->ops.info) {
+	case SND_SOC_TPLG_CTL_BYTES:
+		tplg_bc = container_of(hdr,
+				struct snd_soc_tplg_bytes_control, hdr);
+		if (kctl->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
+			sb = (struct soc_bytes_ext *)kctl->private_value;
+			if (tplg_bc->priv.size)
+				return skl_init_algo_data(
+						bus->dev, sb, tplg_bc);
+		}
+		break;
+
+	case SND_SOC_TPLG_CTL_ENUM:
+		tplg_ec = container_of(hdr,
+				struct snd_soc_tplg_enum_control, hdr);
+		if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) {
+			se = (struct soc_enum *)kctl->private_value;
+			if (tplg_ec->priv.size)
+				skl_init_enum_data(bus->dev, se, tplg_ec);
+		}
+
+		/*
+		 * now that the control initializations are done, remove
+		 * write permission for the DMIC configuration enums to
+		 * avoid conflicts between NHLT settings and user interaction
+		 */
+
+		if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC)
+			kctl->access = SNDRV_CTL_ELEM_ACCESS_READ;
+
+		break;
+
+	default:
+		dev_dbg(bus->dev, "Control load not supported %d:%d:%d\n",
+			hdr->ops.get, hdr->ops.put, hdr->ops.info);
+		break;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_fill_str_mfest_tkn(struct device *dev,
+		struct snd_soc_tplg_vendor_string_elem *str_elem,
+		struct skl_dev *skl)
+{
+	int tkn_count = 0;
+	static int ref_count;
+
+	switch (str_elem->token) {
+	case SKL_TKN_STR_LIB_NAME:
+		if (ref_count > skl->lib_count - 1) {
+			ref_count = 0;
+			return -EINVAL;
+		}
+
+		strncpy(skl->lib_info[ref_count].name,
+			str_elem->string,
+			ARRAY_SIZE(skl->lib_info[ref_count].name));
+		ref_count++;
+		break;
+
+	default:
+		dev_err(dev, "Not a string token %d\n", str_elem->token);
+		break;
+	}
+	tkn_count++;
+
+	return tkn_count;
+}
+
+static int skl_tplg_get_str_tkn(struct device *dev,
+		struct snd_soc_tplg_vendor_array *array,
+		struct skl_dev *skl)
+{
+	int tkn_count = 0, ret;
+	struct snd_soc_tplg_vendor_string_elem *str_elem;
+
+	str_elem = (struct snd_soc_tplg_vendor_string_elem *)array->value;
+	while (tkn_count < array->num_elems) {
+		ret = skl_tplg_fill_str_mfest_tkn(dev, str_elem, skl);
+		str_elem++;
+
+		if (ret < 0)
+			return ret;
+
+		tkn_count = tkn_count + ret;
+	}
+
+	return tkn_count;
+}
+
+static int skl_tplg_manifest_fill_fmt(struct device *dev,
+		struct skl_module_iface *fmt,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		u32 dir, int fmt_idx)
+{
+	struct skl_module_pin_fmt *dst_fmt;
+	struct skl_module_fmt *mod_fmt;
+	int ret;
+
+	if (!fmt)
+		return -EINVAL;
+
+	switch (dir) {
+	case SKL_DIR_IN:
+		dst_fmt = &fmt->inputs[fmt_idx];
+		break;
+
+	case SKL_DIR_OUT:
+		dst_fmt = &fmt->outputs[fmt_idx];
+		break;
+
+	default:
+		dev_err(dev, "Invalid direction: %d\n", dir);
+		return -EINVAL;
+	}
+
+	mod_fmt = &dst_fmt->fmt;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_MM_U32_INTF_PIN_ID:
+		dst_fmt->id = tkn_elem->value;
+		break;
+
+	default:
+		ret = skl_tplg_fill_fmt(dev, mod_fmt, tkn_elem->token,
+					tkn_elem->value);
+		if (ret < 0)
+			return ret;
+		break;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_fill_mod_info(struct device *dev,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		struct skl_module *mod)
+{
+
+	if (!mod)
+		return -EINVAL;
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_U8_IN_PIN_TYPE:
+		mod->input_pin_type = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_OUT_PIN_TYPE:
+		mod->output_pin_type = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_IN_QUEUE_COUNT:
+		mod->max_input_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_OUT_QUEUE_COUNT:
+		mod->max_output_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U8_NUM_RES:
+		mod->nr_resources = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U8_NUM_INTF:
+		mod->nr_interfaces = tkn_elem->value;
+		break;
+
+	default:
+		dev_err(dev, "Invalid mod info token %d", tkn_elem->token);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int skl_tplg_get_int_tkn(struct device *dev,
+		struct snd_soc_tplg_vendor_value_elem *tkn_elem,
+		struct skl_dev *skl)
+{
+	int tkn_count = 0, ret;
+	static int mod_idx, res_val_idx, intf_val_idx, dir, pin_idx;
+	struct skl_module_res *res = NULL;
+	struct skl_module_iface *fmt = NULL;
+	struct skl_module *mod = NULL;
+	static struct skl_astate_param *astate_table;
+	static int astate_cfg_idx, count;
+	int i;
+	size_t size;
+
+	if (skl->modules) {
+		mod = skl->modules[mod_idx];
+		res = &mod->resources[res_val_idx];
+		fmt = &mod->formats[intf_val_idx];
+	}
+
+	switch (tkn_elem->token) {
+	case SKL_TKN_U32_LIB_COUNT:
+		skl->lib_count = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_NUM_MOD:
+		skl->nr_modules = tkn_elem->value;
+		skl->modules = devm_kcalloc(dev, skl->nr_modules,
+				sizeof(*skl->modules), GFP_KERNEL);
+		if (!skl->modules)
+			return -ENOMEM;
+
+		for (i = 0; i < skl->nr_modules; i++) {
+			skl->modules[i] = devm_kzalloc(dev,
+					sizeof(struct skl_module), GFP_KERNEL);
+			if (!skl->modules[i])
+				return -ENOMEM;
+		}
+		break;
+
+	case SKL_TKN_MM_U8_MOD_IDX:
+		mod_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_ASTATE_COUNT:
+		if (astate_table != NULL) {
+			dev_err(dev, "More than one entry for A-State count");
+			return -EINVAL;
+		}
+
+		if (tkn_elem->value > SKL_MAX_ASTATE_CFG) {
+			dev_err(dev, "Invalid A-State count %d\n",
+				tkn_elem->value);
+			return -EINVAL;
+		}
+
+		size = struct_size(skl->cfg.astate_cfg, astate_table,
+				   tkn_elem->value);
+		skl->cfg.astate_cfg = devm_kzalloc(dev, size, GFP_KERNEL);
+		if (!skl->cfg.astate_cfg)
+			return -ENOMEM;
+
+		astate_table = skl->cfg.astate_cfg->astate_table;
+		count = skl->cfg.astate_cfg->count = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_ASTATE_IDX:
+		if (tkn_elem->value >= count) {
+			dev_err(dev, "Invalid A-State index %d\n",
+				tkn_elem->value);
+			return -EINVAL;
+		}
+
+		astate_cfg_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_ASTATE_KCPS:
+		astate_table[astate_cfg_idx].kcps = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_ASTATE_CLK_SRC:
+		astate_table[astate_cfg_idx].clk_src = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U8_IN_PIN_TYPE:
+	case SKL_TKN_U8_OUT_PIN_TYPE:
+	case SKL_TKN_U8_IN_QUEUE_COUNT:
+	case SKL_TKN_U8_OUT_QUEUE_COUNT:
+	case SKL_TKN_MM_U8_NUM_RES:
+	case SKL_TKN_MM_U8_NUM_INTF:
+		ret = skl_tplg_fill_mod_info(dev, tkn_elem, mod);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case SKL_TKN_U32_DIR_PIN_COUNT:
+		dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK;
+		pin_idx = (tkn_elem->value & SKL_PIN_COUNT_MASK) >> 4;
+		break;
+
+	case SKL_TKN_MM_U32_RES_ID:
+		if (!res)
+			return -EINVAL;
+
+		res->id = tkn_elem->value;
+		res_val_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_FMT_ID:
+		if (!fmt)
+			return -EINVAL;
+
+		fmt->fmt_idx = tkn_elem->value;
+		intf_val_idx = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_CPS:
+	case SKL_TKN_MM_U32_DMA_SIZE:
+	case SKL_TKN_MM_U32_CPC:
+	case SKL_TKN_U32_MEM_PAGES:
+	case SKL_TKN_U32_OBS:
+	case SKL_TKN_U32_IBS:
+	case SKL_TKN_MM_U32_RES_PIN_ID:
+	case SKL_TKN_MM_U32_PIN_BUF:
+		ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_idx, dir);
+		if (ret < 0)
+			return ret;
+
+		break;
+
+	case SKL_TKN_MM_U32_NUM_IN_FMT:
+		if (!fmt)
+			return -EINVAL;
+
+		res->nr_input_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_MM_U32_NUM_OUT_FMT:
+		if (!fmt)
+			return -EINVAL;
+
+		res->nr_output_pins = tkn_elem->value;
+		break;
+
+	case SKL_TKN_U32_FMT_CH:
+	case SKL_TKN_U32_FMT_FREQ:
+	case SKL_TKN_U32_FMT_BIT_DEPTH:
+	case SKL_TKN_U32_FMT_SAMPLE_SIZE:
+	case SKL_TKN_U32_FMT_CH_CONFIG:
+	case SKL_TKN_U32_FMT_INTERLEAVE:
+	case SKL_TKN_U32_FMT_SAMPLE_TYPE:
+	case SKL_TKN_U32_FMT_CH_MAP:
+	case SKL_TKN_MM_U32_INTF_PIN_ID:
+		ret = skl_tplg_manifest_fill_fmt(dev, fmt, tkn_elem,
+						 dir, pin_idx);
+		if (ret < 0)
+			return ret;
+		break;
+
+	default:
+		dev_err(dev, "Not a manifest token %d\n", tkn_elem->token);
+		return -EINVAL;
+	}
+	tkn_count++;
+
+	return tkn_count;
+}
+
+/*
+ * Fill the manifest structure by parsing the tokens based on the
+ * type.
+ */
+static int skl_tplg_get_manifest_tkn(struct device *dev,
+		char *pvt_data, struct skl_dev *skl,
+		int block_size)
+{
+	int tkn_count = 0, ret;
+	int off = 0, tuple_size = 0;
+	u8 uuid_index = 0;
+	struct snd_soc_tplg_vendor_array *array;
+	struct snd_soc_tplg_vendor_value_elem *tkn_elem;
+
+	if (block_size <= 0)
+		return -EINVAL;
+
+	while (tuple_size < block_size) {
+		array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off);
+		off += array->size;
+		switch (array->type) {
+		case SND_SOC_TPLG_TUPLE_TYPE_STRING:
+			ret = skl_tplg_get_str_tkn(dev, array, skl);
+
+			if (ret < 0)
+				return ret;
+			tkn_count = ret;
+
+			tuple_size += tkn_count *
+				sizeof(struct snd_soc_tplg_vendor_string_elem);
+			continue;
+
+		case SND_SOC_TPLG_TUPLE_TYPE_UUID:
+			if (array->uuid->token != SKL_TKN_UUID) {
+				dev_err(dev, "Not an UUID token: %d\n",
+					array->uuid->token);
+				return -EINVAL;
+			}
+			if (uuid_index >= skl->nr_modules) {
+				dev_err(dev, "Too many UUID tokens\n");
+				return -EINVAL;
+			}
+			import_guid(&skl->modules[uuid_index++]->uuid,
+				    array->uuid->uuid);
+
+			tuple_size += sizeof(*array->uuid);
+			continue;
+
+		default:
+			tkn_elem = array->value;
+			tkn_count = 0;
+			break;
+		}
+
+		while (tkn_count <= array->num_elems - 1) {
+			ret = skl_tplg_get_int_tkn(dev,
+					tkn_elem, skl);
+			if (ret < 0)
+				return ret;
+
+			tkn_count = tkn_count + ret;
+			tkn_elem++;
+		}
+		tuple_size += (tkn_count * sizeof(*tkn_elem));
+		tkn_count = 0;
+	}
+
+	return off;
+}
+
+/*
+ * Parse manifest private data for tokens. The private data block is
+ * preceded by descriptors for type and size of data block.
+ */
+static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest,
+			struct device *dev, struct skl_dev *skl)
+{
+	struct snd_soc_tplg_vendor_array *array;
+	int num_blocks, block_size = 0, block_type, off = 0;
+	char *data;
+	int ret;
+
+	/* Read the NUM_DATA_BLOCKS descriptor */
+	array = (struct snd_soc_tplg_vendor_array *)manifest->priv.data;
+	ret = skl_tplg_get_desc_blocks(dev, array);
+	if (ret < 0)
+		return ret;
+	num_blocks = ret;
+
+	off += array->size;
+	/* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */
+	while (num_blocks > 0) {
+		array = (struct snd_soc_tplg_vendor_array *)
+				(manifest->priv.data + off);
+		ret = skl_tplg_get_desc_blocks(dev, array);
+
+		if (ret < 0)
+			return ret;
+		block_type = ret;
+		off += array->size;
+
+		array = (struct snd_soc_tplg_vendor_array *)
+			(manifest->priv.data + off);
+
+		ret = skl_tplg_get_desc_blocks(dev, array);
+
+		if (ret < 0)
+			return ret;
+		block_size = ret;
+		off += array->size;
+
+		data = (manifest->priv.data + off);
+
+		if (block_type == SKL_TYPE_TUPLE) {
+			ret = skl_tplg_get_manifest_tkn(dev, data, skl,
+					block_size);
+
+			if (ret < 0)
+				return ret;
+
+			--num_blocks;
+		} else {
+			return -EINVAL;
+		}
+		off += ret;
+	}
+
+	return 0;
+}
+
+static int skl_manifest_load(struct snd_soc_component *cmpnt, int index,
+				struct snd_soc_tplg_manifest *manifest)
+{
+	struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt);
+	struct skl_dev *skl = bus_to_skl(bus);
+
+	/* proceed only if we have private data defined */
+	if (manifest->priv.size == 0)
+		return 0;
+
+	skl_tplg_get_manifest_data(manifest, bus->dev, skl);
+
+	if (skl->lib_count > SKL_MAX_LIB) {
+		dev_err(bus->dev, "Exceeding max Library count. Got:%d\n",
+					skl->lib_count);
+		return  -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_complete(struct snd_soc_component *component)
+{
+	struct snd_soc_dobj *dobj;
+	struct snd_soc_acpi_mach *mach;
+	struct snd_ctl_elem_value *val;
+	int i;
+
+	val = kmalloc(sizeof(*val), GFP_KERNEL);
+	if (!val)
+		return -ENOMEM;
+
+	mach = dev_get_platdata(component->card->dev);
+	list_for_each_entry(dobj, &component->dobj_list, list) {
+		struct snd_kcontrol *kcontrol = dobj->control.kcontrol;
+		struct soc_enum *se;
+		char **texts;
+		char chan_text[4];
+
+		if (dobj->type != SND_SOC_DOBJ_ENUM || !kcontrol ||
+		    kcontrol->put != skl_tplg_multi_config_set_dmic)
+			continue;
+
+		se = (struct soc_enum *)kcontrol->private_value;
+		texts = dobj->control.dtexts;
+		sprintf(chan_text, "c%d", mach->mach_params.dmic_num);
+
+		for (i = 0; i < se->items; i++) {
+			if (strstr(texts[i], chan_text)) {
+				memset(val, 0, sizeof(*val));
+				val->value.enumerated.item[0] = i;
+				kcontrol->put(kcontrol, val);
+			}
+		}
+	}
+
+	kfree(val);
+	return 0;
+}
+
+static struct snd_soc_tplg_ops skl_tplg_ops  = {
+	.widget_load = skl_tplg_widget_load,
+	.control_load = skl_tplg_control_load,
+	.bytes_ext_ops = skl_tlv_ops,
+	.bytes_ext_ops_count = ARRAY_SIZE(skl_tlv_ops),
+	.io_ops = skl_tplg_kcontrol_ops,
+	.io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops),
+	.manifest = skl_manifest_load,
+	.dai_load = skl_dai_load,
+	.complete = skl_tplg_complete,
+};
+
+/*
+ * A pipe can have multiple modules, each of them will be a DAPM widget as
+ * well. While managing a pipeline we need to get the list of all the
+ * widgets in a pipelines, so this helper - skl_tplg_create_pipe_widget_list()
+ * helps to get the SKL type widgets in that pipeline
+ */
+static int skl_tplg_create_pipe_widget_list(struct snd_soc_component *component)
+{
+	struct snd_soc_dapm_widget *w;
+	struct skl_module_cfg *mcfg = NULL;
+	struct skl_pipe_module *p_module = NULL;
+	struct skl_pipe *pipe;
+
+	list_for_each_entry(w, &component->card->widgets, list) {
+		if (is_skl_dsp_widget_type(w, component->dev) && w->priv) {
+			mcfg = w->priv;
+			pipe = mcfg->pipe;
+
+			p_module = devm_kzalloc(component->dev,
+						sizeof(*p_module), GFP_KERNEL);
+			if (!p_module)
+				return -ENOMEM;
+
+			p_module->w = w;
+			list_add_tail(&p_module->node, &pipe->w_list);
+		}
+	}
+
+	return 0;
+}
+
+static void skl_tplg_set_pipe_type(struct skl_dev *skl, struct skl_pipe *pipe)
+{
+	struct skl_pipe_module *w_module;
+	struct snd_soc_dapm_widget *w;
+	struct skl_module_cfg *mconfig;
+	bool host_found = false, link_found = false;
+
+	list_for_each_entry(w_module, &pipe->w_list, node) {
+		w = w_module->w;
+		mconfig = w->priv;
+
+		if (mconfig->dev_type == SKL_DEVICE_HDAHOST)
+			host_found = true;
+		else if (mconfig->dev_type != SKL_DEVICE_NONE)
+			link_found = true;
+	}
+
+	if (host_found && link_found)
+		pipe->passthru = true;
+	else
+		pipe->passthru = false;
+}
+
+/*
+ * SKL topology init routine
+ */
+int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus)
+{
+	int ret;
+	const struct firmware *fw;
+	struct skl_dev *skl = bus_to_skl(bus);
+	struct skl_pipeline *ppl;
+
+	ret = request_firmware(&fw, skl->tplg_name, bus->dev);
+	if (ret < 0) {
+		char alt_tplg_name[64];
+
+		snprintf(alt_tplg_name, sizeof(alt_tplg_name), "%s-tplg.bin",
+			 skl->mach->drv_name);
+		dev_info(bus->dev, "tplg fw %s load failed with %d, trying alternative tplg name %s",
+			 skl->tplg_name, ret, alt_tplg_name);
+
+		ret = request_firmware(&fw, alt_tplg_name, bus->dev);
+		if (!ret)
+			goto component_load;
+
+		dev_info(bus->dev, "tplg %s failed with %d, falling back to dfw_sst.bin",
+			 alt_tplg_name, ret);
+
+		ret = request_firmware(&fw, "dfw_sst.bin", bus->dev);
+		if (ret < 0) {
+			dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n",
+					"dfw_sst.bin", ret);
+			return ret;
+		}
+	}
+
+component_load:
+	ret = snd_soc_tplg_component_load(component, &skl_tplg_ops, fw);
+	if (ret < 0) {
+		dev_err(bus->dev, "tplg component load failed%d\n", ret);
+		goto err;
+	}
+
+	ret = skl_tplg_create_pipe_widget_list(component);
+	if (ret < 0) {
+		dev_err(bus->dev, "tplg create pipe widget list failed%d\n",
+				ret);
+		goto err;
+	}
+
+	list_for_each_entry(ppl, &skl->ppl_list, node)
+		skl_tplg_set_pipe_type(skl, ppl->pipe);
+
+err:
+	release_firmware(fw);
+	return ret;
+}
+
+void skl_tplg_exit(struct snd_soc_component *component, struct hdac_bus *bus)
+{
+	struct skl_dev *skl = bus_to_skl(bus);
+	struct skl_pipeline *ppl, *tmp;
+
+	list_for_each_entry_safe(ppl, tmp, &skl->ppl_list, node)
+		list_del(&ppl->node);
+
+	/* clean up topology */
+	snd_soc_tplg_component_remove(component);
+}