Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 1278 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
new file mode 100644
index 0000000000..8a72bb7de7
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := \
+	bond-arp-interval-causes-panic.sh \
+	bond-break-lacpdu-tx.sh \
+	bond-lladdr-target.sh \
+	dev_addr_lists.sh \
+	mode-1-recovery-updelay.sh \
+	mode-2-recovery-updelay.sh \
+	bond_options.sh \
+	bond-eth-type-change.sh \
+	bond_macvlan.sh
+
+TEST_FILES := \
+	lag_lib.sh \
+	bond_topo_2d1c.sh \
+	bond_topo_3d1c.sh \
+	net_forwarding_lib.sh
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh
new file mode 100755
index 0000000000..5667febee3
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-arp-interval-causes-panic.sh
@@ -0,0 +1,46 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# cause kernel oops in bond_rr_gen_slave_id
+DEBUG=${DEBUG:-0}
+
+set -e
+test ${DEBUG} -ne 0 && set -x
+
+finish()
+{
+	ip netns delete server || true
+	ip netns delete client || true
+}
+
+trap finish EXIT
+
+client_ip4=192.168.1.198
+server_ip4=192.168.1.254
+
+# setup kernel so it reboots after causing the panic
+echo 180 >/proc/sys/kernel/panic
+
+# build namespaces
+ip netns add "server"
+ip netns add "client"
+ip -n client link add eth0 type veth peer name eth0 netns server
+ip netns exec server ip link set dev eth0 up
+ip netns exec server ip addr add ${server_ip4}/24 dev eth0
+
+ip netns exec client ip link add dev bond0 down type bond mode 1 \
+	miimon 100 all_slaves_active 1
+ip netns exec client ip link set dev eth0 master bond0
+ip netns exec client ip link set dev bond0 up
+ip netns exec client ip addr add ${client_ip4}/24 dev bond0
+ip netns exec client ping -c 5 $server_ip4 >/dev/null
+
+ip netns exec client ip link set dev eth0 nomaster
+ip netns exec client ip link set dev bond0 down
+ip netns exec client ip link set dev bond0 type bond mode 0 \
+	arp_interval 1000 arp_ip_target "+${server_ip4}"
+ip netns exec client ip link set dev eth0 master bond0
+ip netns exec client ip link set dev bond0 up
+ip netns exec client ping -c 5 $server_ip4 >/dev/null
+
+exit 0
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
new file mode 100755
index 0000000000..6358df5752
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
@@ -0,0 +1,81 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify LACPDUs get transmitted after setting the MAC address of
+#   the bond.
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=2020773
+#
+#       +---------+
+#       | fab-br0 |
+#       +---------+
+#            |
+#       +---------+
+#       |  fbond  |
+#       +---------+
+#        |       |
+#    +------+ +------+
+#    |veth1 | |veth2 |
+#    +------+ +------+
+#
+# We use veths instead of physical interfaces
+
+set -e
+tmp=$(mktemp -q dump.XXXXXX)
+cleanup() {
+	ip link del fab-br0 >/dev/null 2>&1 || :
+	ip link del fbond  >/dev/null 2>&1 || :
+	ip link del veth1-bond  >/dev/null 2>&1 || :
+	ip link del veth2-bond  >/dev/null 2>&1 || :
+	modprobe -r bonding  >/dev/null 2>&1 || :
+	rm -f -- ${tmp}
+}
+
+trap cleanup 0 1 2
+cleanup
+sleep 1
+
+# create the bridge
+ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \
+	forward_delay 15
+
+# create the bond
+ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \
+	ad_actor_sys_prio 65535 lacp_rate fast
+
+# set bond address
+ip link set fbond address 52:54:00:3B:7C:A6
+ip link set fbond up
+
+# set again bond sysfs parameters
+ip link set fbond type bond ad_actor_sys_prio 65535
+
+# create veths
+ip link add name veth1-bond type veth peer name veth1-end
+ip link add name veth2-bond type veth peer name veth2-end
+
+# add ports
+ip link set fbond master fab-br0
+ip link set veth1-bond master fbond
+ip link set veth2-bond master fbond
+
+# bring up
+ip link set veth1-end up
+ip link set veth2-end up
+ip link set fab-br0 up
+ip link set fbond up
+ip addr add dev fab-br0 10.0.0.3
+
+tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 &
+sleep 15
+pkill tcpdump >/dev/null 2>&1
+rc=0
+num=$(grep "packets captured" ${tmp} | awk '{print $1}')
+if test "$num" -gt 0; then
+	echo "PASS, captured ${num}"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh b/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh
new file mode 100755
index 0000000000..862e947e17
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-eth-type-change.sh
@@ -0,0 +1,84 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bond device ether type changing
+#
+
+ALL_TESTS="
+	bond_test_unsuccessful_enslave_type_change
+	bond_test_successful_enslave_type_change
+"
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+bond_check_flags()
+{
+	local bonddev=$1
+
+	ip -d l sh dev "$bonddev" | grep -q "MASTER"
+	check_err $? "MASTER flag is missing from the bond device"
+
+	ip -d l sh dev "$bonddev" | grep -q "SLAVE"
+	check_err $? "SLAVE flag is missing from the bond device"
+}
+
+# test enslaved bond dev type change from ARPHRD_ETHER and back
+# this allows us to test both MASTER and SLAVE flags at once
+bond_test_enslave_type_change()
+{
+	local test_success=$1
+	local devbond0="test-bond0"
+	local devbond1="test-bond1"
+	local devbond2="test-bond2"
+	local nonethdev="test-noneth0"
+
+	# create a non-ARPHRD_ETHER device for testing (e.g. nlmon type)
+	ip link add name "$nonethdev" type nlmon
+	check_err $? "could not create a non-ARPHRD_ETHER device (nlmon)"
+	ip link add name "$devbond0" type bond
+	if [ $test_success -eq 1 ]; then
+		# we need devbond0 in active-backup mode to successfully enslave nonethdev
+		ip link set dev "$devbond0" type bond mode active-backup
+		check_err $? "could not change bond mode to active-backup"
+	fi
+	ip link add name "$devbond1" type bond
+	ip link add name "$devbond2" type bond
+	ip link set dev "$devbond0" master "$devbond1"
+	check_err $? "could not enslave $devbond0 to $devbond1"
+	# change bond type to non-ARPHRD_ETHER
+	ip link set dev "$nonethdev" master "$devbond0" 1>/dev/null 2>/dev/null
+	ip link set dev "$nonethdev" nomaster 1>/dev/null 2>/dev/null
+	# restore ARPHRD_ETHER type by enslaving such device
+	ip link set dev "$devbond2" master "$devbond0"
+	check_err $? "could not enslave $devbond2 to $devbond0"
+
+	bond_check_flags "$devbond0"
+
+	# clean up
+	ip link del dev "$devbond0"
+	ip link del dev "$devbond1"
+	ip link del dev "$devbond2"
+	ip link del dev "$nonethdev"
+}
+
+bond_test_unsuccessful_enslave_type_change()
+{
+	RET=0
+
+	bond_test_enslave_type_change 0
+	log_test "Change ether type of an enslaved bond device with unsuccessful enslave"
+}
+
+bond_test_successful_enslave_type_change()
+{
+	RET=0
+
+	bond_test_enslave_type_change 1
+	log_test "Change ether type of an enslaved bond device with successful enslave"
+}
+
+tests_run
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh
new file mode 100755
index 0000000000..89af402fab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-lladdr-target.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify bond interface could up when set IPv6 link local address target.
+#
+#  +----------------+
+#  |      br0       |
+#  |       |        |    sw
+#  | veth0   veth1  |
+#  +---+-------+----+
+#      |       |
+#  +---+-------+----+
+#  | veth0   veth1  |
+#  |       |        |    host
+#  |     bond0      |
+#  +----------------+
+#
+# We use veths instead of physical interfaces
+sw="sw-$(mktemp -u XXXXXX)"
+host="ns-$(mktemp -u XXXXXX)"
+
+cleanup()
+{
+	ip netns del $sw
+	ip netns del $host
+}
+
+trap cleanup 0 1 2
+
+ip netns add $sw
+ip netns add $host
+
+ip -n $host link add veth0 type veth peer name veth0 netns $sw
+ip -n $host link add veth1 type veth peer name veth1 netns $sw
+
+ip -n $sw link add br0 type bridge
+ip -n $sw link set br0 up
+sw_lladdr=$(ip -n $sw addr show br0 | awk '/fe80/{print $2}' | cut -d'/' -f1)
+# sleep some time to make sure bridge lladdr pass DAD
+sleep 2
+
+ip -n $host link add bond0 type bond mode 1 ns_ip6_target ${sw_lladdr} \
+	arp_validate 3 arp_interval 1000
+# add a lladdr for bond to make sure there is a route to target
+ip -n $host addr add fe80::beef/64 dev bond0
+ip -n $host link set bond0 up
+ip -n $host link set veth0 master bond0
+ip -n $host link set veth1 master bond0
+
+ip -n $sw link set veth0 master br0
+ip -n $sw link set veth1 master br0
+ip -n $sw link set veth0 up
+ip -n $sw link set veth1 up
+
+sleep 5
+
+rc=0
+if ip -n $host link show bond0 | grep -q LOWER_UP; then
+	echo "PASS"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
new file mode 100755
index 0000000000..b609fb6231
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
@@ -0,0 +1,99 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test macvlan over balance-alb
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_2d1c.sh
+
+m1_ns="m1-$(mktemp -u XXXXXX)"
+m2_ns="m1-$(mktemp -u XXXXXX)"
+m1_ip4="192.0.2.11"
+m1_ip6="2001:db8::11"
+m2_ip4="192.0.2.12"
+m2_ip6="2001:db8::12"
+
+cleanup()
+{
+	ip -n ${m1_ns} link del macv0
+	ip netns del ${m1_ns}
+	ip -n ${m2_ns} link del macv0
+	ip netns del ${m2_ns}
+
+	client_destroy
+	server_destroy
+	gateway_destroy
+}
+
+check_connection()
+{
+	local ns=${1}
+	local target=${2}
+	local message=${3:-"macvlan_over_bond"}
+	RET=0
+
+
+	ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
+	check_err $? "ping failed"
+	log_test "$mode: $message"
+}
+
+macvlan_over_bond()
+{
+	local param="$1"
+	RET=0
+
+	# setup new bond mode
+	bond_reset "${param}"
+
+	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+	ip -n ${s_ns} link set macv0 netns ${m1_ns}
+	ip -n ${m1_ns} link set dev macv0 up
+	ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0
+	ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0
+
+	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+	ip -n ${s_ns} link set macv0 netns ${m2_ns}
+	ip -n ${m2_ns} link set dev macv0 up
+	ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0
+	ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0
+
+	sleep 2
+
+	check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
+	check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
+	check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1"
+	check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1"
+	check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2"
+	check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2"
+	check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2"
+	check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2"
+
+
+	sleep 5
+
+	check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
+	check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
+	check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client"
+	check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client"
+	check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client"
+	check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client"
+	check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2"
+	check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2"
+
+	ip -n ${c_ns} neigh flush dev eth0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+ip netns add ${m1_ns}
+ip netns add ${m2_ns}
+
+modes="active-backup balance-tlb balance-alb"
+
+for mode in $modes; do
+	macvlan_over_bond "mode $mode"
+done
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
new file mode 100755
index 0000000000..d508486cc0
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh
@@ -0,0 +1,311 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bonding options with mode 1,5,6
+
+ALL_TESTS="
+	prio
+	arp_validate
+	num_grat_arp
+"
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_3d1c.sh
+
+skip_prio()
+{
+	local skip=1
+
+	# check if iproute support prio option
+	ip -n ${s_ns} link set eth0 type bond_slave prio 10
+	[[ $? -ne 0 ]] && skip=0
+
+	# check if kernel support prio option
+	ip -n ${s_ns} -d link show eth0 | grep -q "prio 10"
+	[[ $? -ne 0 ]] && skip=0
+
+	return $skip
+}
+
+skip_ns()
+{
+	local skip=1
+
+	# check if iproute support ns_ip6_target option
+	ip -n ${s_ns} link add bond1 type bond ns_ip6_target ${g_ip6}
+	[[ $? -ne 0 ]] && skip=0
+
+	# check if kernel support ns_ip6_target option
+	ip -n ${s_ns} -d link show bond1 | grep -q "ns_ip6_target ${g_ip6}"
+	[[ $? -ne 0 ]] && skip=0
+
+	ip -n ${s_ns} link del bond1
+
+	return $skip
+}
+
+active_slave=""
+check_active_slave()
+{
+	local target_active_slave=$1
+	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+	test "$active_slave" = "$target_active_slave"
+	check_err $? "Current active slave is $active_slave but not $target_active_slave"
+}
+
+
+# Test bonding prio option
+prio_test()
+{
+	local param="$1"
+	RET=0
+
+	# create bond
+	bond_reset "${param}"
+
+	# check bonding member prio value
+	ip -n ${s_ns} link set eth0 type bond_slave prio 0
+	ip -n ${s_ns} link set eth1 type bond_slave prio 10
+	ip -n ${s_ns} link set eth2 type bond_slave prio 11
+	cmd_jq "ip -n ${s_ns} -d -j link show eth0" \
+		".[].linkinfo.info_slave_data | select (.prio == 0)" "-e" &> /dev/null
+	check_err $? "eth0 prio is not 0"
+	cmd_jq "ip -n ${s_ns} -d -j link show eth1" \
+		".[].linkinfo.info_slave_data | select (.prio == 10)" "-e" &> /dev/null
+	check_err $? "eth1 prio is not 10"
+	cmd_jq "ip -n ${s_ns} -d -j link show eth2" \
+		".[].linkinfo.info_slave_data | select (.prio == 11)" "-e" &> /dev/null
+	check_err $? "eth2 prio is not 11"
+
+	bond_check_connection "setup"
+
+	# active slave should be the primary slave
+	check_active_slave eth1
+
+	# active slave should be the higher prio slave
+	ip -n ${s_ns} link set $active_slave down
+	bond_check_connection "fail over"
+	check_active_slave eth2
+
+	# when only 1 slave is up
+	ip -n ${s_ns} link set $active_slave down
+	bond_check_connection "only 1 slave up"
+	check_active_slave eth0
+
+	# when a higher prio slave change to up
+	ip -n ${s_ns} link set eth2 up
+	bond_check_connection "higher prio slave up"
+	case $primary_reselect in
+		"0")
+			check_active_slave "eth2"
+			;;
+		"1")
+			check_active_slave "eth0"
+			;;
+		"2")
+			check_active_slave "eth0"
+			;;
+	esac
+	local pre_active_slave=$active_slave
+
+	# when the primary slave change to up
+	ip -n ${s_ns} link set eth1 up
+	bond_check_connection "primary slave up"
+	case $primary_reselect in
+		"0")
+			check_active_slave "eth1"
+			;;
+		"1")
+			check_active_slave "$pre_active_slave"
+			;;
+		"2")
+			check_active_slave "$pre_active_slave"
+			ip -n ${s_ns} link set $active_slave down
+			bond_check_connection "pre_active slave down"
+			check_active_slave "eth1"
+			;;
+	esac
+
+	# Test changing bond slave prio
+	if [[ "$primary_reselect" == "0" ]];then
+		ip -n ${s_ns} link set eth0 type bond_slave prio 1000000
+		ip -n ${s_ns} link set eth1 type bond_slave prio 0
+		ip -n ${s_ns} link set eth2 type bond_slave prio -50
+		ip -n ${s_ns} -d link show eth0 | grep -q 'prio 1000000'
+		check_err $? "eth0 prio is not 1000000"
+		ip -n ${s_ns} -d link show eth1 | grep -q 'prio 0'
+		check_err $? "eth1 prio is not 0"
+		ip -n ${s_ns} -d link show eth2 | grep -q 'prio -50'
+		check_err $? "eth3 prio is not -50"
+		check_active_slave "eth1"
+
+		ip -n ${s_ns} link set $active_slave down
+		bond_check_connection "change slave prio"
+		check_active_slave "eth0"
+	fi
+}
+
+prio_miimon()
+{
+	local primary_reselect
+	local mode=$1
+
+	for primary_reselect in 0 1 2; do
+		prio_test "mode $mode miimon 100 primary eth1 primary_reselect $primary_reselect"
+		log_test "prio" "$mode miimon primary_reselect $primary_reselect"
+	done
+}
+
+prio_arp()
+{
+	local primary_reselect
+	local mode=$1
+
+	for primary_reselect in 0 1 2; do
+		prio_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} primary eth1 primary_reselect $primary_reselect"
+		log_test "prio" "$mode arp_ip_target primary_reselect $primary_reselect"
+	done
+}
+
+prio_ns()
+{
+	local primary_reselect
+	local mode=$1
+
+	if skip_ns; then
+		log_test_skip "prio ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'."
+		return 0
+	fi
+
+	for primary_reselect in 0 1 2; do
+		prio_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} primary eth1 primary_reselect $primary_reselect"
+		log_test "prio" "$mode ns_ip6_target primary_reselect $primary_reselect"
+	done
+}
+
+prio()
+{
+	local mode modes="active-backup balance-tlb balance-alb"
+
+	if skip_prio; then
+		log_test_skip "prio" "Current iproute or kernel doesn't support bond option 'prio'."
+		return 0
+	fi
+
+	for mode in $modes; do
+		prio_miimon $mode
+	done
+	prio_arp "active-backup"
+	prio_ns "active-backup"
+}
+
+arp_validate_test()
+{
+	local param="$1"
+	RET=0
+
+	# create bond
+	bond_reset "${param}"
+
+	bond_check_connection
+	[ $RET -ne 0 ] && log_test "arp_validate" "$retmsg"
+
+	# wait for a while to make sure the mii status stable
+	sleep 5
+	for i in $(seq 0 2); do
+		mii_status=$(cmd_jq "ip -n ${s_ns} -j -d link show eth$i" ".[].linkinfo.info_slave_data.mii_status")
+		if [ ${mii_status} != "UP" ]; then
+			RET=1
+			log_test "arp_validate" "interface eth$i mii_status $mii_status"
+		fi
+	done
+}
+
+arp_validate_arp()
+{
+	local mode=$1
+	local val
+	for val in $(seq 0 6); do
+		arp_validate_test "mode $mode arp_interval 100 arp_ip_target ${g_ip4} arp_validate $val"
+		log_test "arp_validate" "$mode arp_ip_target arp_validate $val"
+	done
+}
+
+arp_validate_ns()
+{
+	local mode=$1
+	local val
+
+	if skip_ns; then
+		log_test_skip "arp_validate ns" "Current iproute or kernel doesn't support bond option 'ns_ip6_target'."
+		return 0
+	fi
+
+	for val in $(seq 0 6); do
+		arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val"
+		log_test "arp_validate" "$mode ns_ip6_target arp_validate $val"
+	done
+}
+
+arp_validate()
+{
+	arp_validate_arp "active-backup"
+	arp_validate_ns "active-backup"
+}
+
+garp_test()
+{
+	local param="$1"
+	local active_slave exp_num real_num i
+	RET=0
+
+	# create bond
+	bond_reset "${param}"
+
+	bond_check_connection
+	[ $RET -ne 0 ] && log_test "num_grat_arp" "$retmsg"
+
+
+	# Add tc rules to count GARP number
+	for i in $(seq 0 2); do
+		tc -n ${g_ns} filter add dev s$i ingress protocol arp pref 1 handle 101 \
+			flower skip_hw arp_op request arp_sip ${s_ip4} arp_tip ${s_ip4} action pass
+	done
+
+	# Do failover
+	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+	ip -n ${s_ns} link set ${active_slave} down
+
+	exp_num=$(echo "${param}" | cut -f6 -d ' ')
+	sleep $((exp_num + 2))
+
+	active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave")
+
+	# check result
+	real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}")
+	if [ "${real_num}" -ne "${exp_num}" ]; then
+		echo "$real_num garp packets sent on active slave ${active_slave}"
+		RET=1
+	fi
+
+	for i in $(seq 0 2); do
+		tc -n ${g_ns} filter del dev s$i ingress
+	done
+}
+
+num_grat_arp()
+{
+	local val
+	for val in 10 20 30 50; do
+		garp_test "mode active-backup miimon 100 num_grat_arp $val peer_notify_delay 1000"
+		log_test "num_grat_arp" "active-backup miimon num_grat_arp $val"
+	done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
new file mode 100644
index 0000000000..a509ef949d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh
@@ -0,0 +1,158 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Topology for Bond mode 1,5,6 testing
+#
+#  +-------------------------+
+#  |          bond0          |  Server
+#  |            +            |  192.0.2.1/24
+#  |      eth0  |  eth1      |  2001:db8::1/24
+#  |        +---+---+        |
+#  |        |       |        |
+#  +-------------------------+
+#           |       |
+#  +-------------------------+
+#  |        |       |        |
+#  |    +---+-------+---+    |  Gateway
+#  |    |      br0      |    |  192.0.2.254/24
+#  |    +-------+-------+    |  2001:db8::254/24
+#  |            |            |
+#  +-------------------------+
+#               |
+#  +-------------------------+
+#  |            |            |  Client
+#  |            +            |  192.0.2.10/24
+#  |          eth0           |  2001:db8::10/24
+#  +-------------------------+
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source ${lib_dir}/net_forwarding_lib.sh
+
+s_ns="s-$(mktemp -u XXXXXX)"
+c_ns="c-$(mktemp -u XXXXXX)"
+g_ns="g-$(mktemp -u XXXXXX)"
+s_ip4="192.0.2.1"
+c_ip4="192.0.2.10"
+g_ip4="192.0.2.254"
+s_ip6="2001:db8::1"
+c_ip6="2001:db8::10"
+g_ip6="2001:db8::254"
+
+gateway_create()
+{
+	ip netns add ${g_ns}
+	ip -n ${g_ns} link add br0 type bridge
+	ip -n ${g_ns} link set br0 up
+	ip -n ${g_ns} addr add ${g_ip4}/24 dev br0
+	ip -n ${g_ns} addr add ${g_ip6}/24 dev br0
+}
+
+gateway_destroy()
+{
+	ip -n ${g_ns} link del br0
+	ip netns del ${g_ns}
+}
+
+server_create()
+{
+	ip netns add ${s_ns}
+	ip -n ${s_ns} link add bond0 type bond mode active-backup miimon 100
+
+	for i in $(seq 0 1); do
+		ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+
+		ip -n ${g_ns} link set s${i} up
+		ip -n ${g_ns} link set s${i} master br0
+		ip -n ${s_ns} link set eth${i} master bond0
+
+		tc -n ${g_ns} qdisc add dev s${i} clsact
+	done
+
+	ip -n ${s_ns} link set bond0 up
+	ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0
+	ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0
+	sleep 2
+}
+
+# Reset bond with new mode and options
+bond_reset()
+{
+	# Count the eth link number in real-time as this function
+	# maybe called from other topologies.
+	local link_num=$(ip -n ${s_ns} -br link show | grep -c "^eth")
+	local param="$1"
+	link_num=$((link_num -1))
+
+	ip -n ${s_ns} link set bond0 down
+	ip -n ${s_ns} link del bond0
+
+	ip -n ${s_ns} link add bond0 type bond $param
+	for i in $(seq 0 ${link_num}); do
+		ip -n ${s_ns} link set eth$i master bond0
+	done
+
+	ip -n ${s_ns} link set bond0 up
+	ip -n ${s_ns} addr add ${s_ip4}/24 dev bond0
+	ip -n ${s_ns} addr add ${s_ip6}/24 dev bond0
+	sleep 2
+}
+
+server_destroy()
+{
+	# Count the eth link number in real-time as this function
+	# maybe called from other topologies.
+	local link_num=$(ip -n ${s_ns} -br link show | grep -c "^eth")
+	link_num=$((link_num -1))
+	for i in $(seq 0 ${link_num}); do
+		ip -n ${s_ns} link del eth${i}
+	done
+	ip netns del ${s_ns}
+}
+
+client_create()
+{
+	ip netns add ${c_ns}
+	ip -n ${c_ns} link add eth0 type veth peer name c0 netns ${g_ns}
+
+	ip -n ${g_ns} link set c0 up
+	ip -n ${g_ns} link set c0 master br0
+
+	ip -n ${c_ns} link set eth0 up
+	ip -n ${c_ns} addr add ${c_ip4}/24 dev eth0
+	ip -n ${c_ns} addr add ${c_ip6}/24 dev eth0
+}
+
+client_destroy()
+{
+	ip -n ${c_ns} link del eth0
+	ip netns del ${c_ns}
+}
+
+setup_prepare()
+{
+	gateway_create
+	server_create
+	client_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	client_destroy
+	server_destroy
+	gateway_destroy
+}
+
+bond_check_connection()
+{
+	local msg=${1:-"check connection"}
+
+	sleep 2
+	ip netns exec ${s_ns} ping ${c_ip4} -c5 -i 0.1 &>/dev/null
+	check_err $? "${msg}: ping failed"
+	ip netns exec ${s_ns} ping6 ${c_ip6} -c5 -i 0.1 &>/dev/null
+	check_err $? "${msg}: ping6 failed"
+}
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
new file mode 100644
index 0000000000..3a1333d9a8
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Topology for Bond mode 1,5,6 testing
+#
+#  +-------------------------------------+
+#  |                bond0                |
+#  |                  +                  |  Server
+#  |      eth0        | eth1   eth2      |  192.0.2.1/24
+#  |        +-------------------+        |  2001:db8::1/24
+#  |        |         |         |        |
+#  +-------------------------------------+
+#           |         |         |
+#  +-------------------------------------+
+#  |        |         |         |        |
+#  |    +---+---------+---------+---+    |  Gateway
+#  |    |            br0            |    |  192.0.2.254/24
+#  |    +-------------+-------------+    |  2001:db8::254/24
+#  |                  |                  |
+#  +-------------------------------------+
+#                     |
+#  +-------------------------------------+
+#  |                  |                  |  Client
+#  |                  +                  |  192.0.2.10/24
+#  |                eth0                 |  2001:db8::10/24
+#  +-------------------------------------+
+
+source bond_topo_2d1c.sh
+
+setup_prepare()
+{
+	gateway_create
+	server_create
+	client_create
+
+	# Add the extra device as we use 3 down links for bond0
+	local i=2
+	ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns}
+	ip -n ${g_ns} link set s${i} up
+	ip -n ${g_ns} link set s${i} master br0
+	ip -n ${s_ns} link set eth${i} master bond0
+	tc -n ${g_ns} qdisc add dev s${i} clsact
+}
diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
new file mode 100644
index 0000000000..70638fa50b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -0,0 +1,2 @@
+CONFIG_BONDING=y
+CONFIG_MACVLAN=y
diff --git a/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh
new file mode 100755
index 0000000000..5cfe7d8ebc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/dev_addr_lists.sh
@@ -0,0 +1,109 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bond device handling of addr lists (dev->uc, mc)
+#
+
+ALL_TESTS="
+	bond_cleanup_mode1
+	bond_cleanup_mode4
+	bond_listen_lacpdu_multicast_case_down
+	bond_listen_lacpdu_multicast_case_up
+"
+
+REQUIRE_MZ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+source "$lib_dir"/lag_lib.sh
+
+
+destroy()
+{
+	local ifnames=(dummy1 dummy2 bond1 mv0)
+	local ifname
+
+	for ifname in "${ifnames[@]}"; do
+		ip link del "$ifname" &>/dev/null
+	done
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+
+# bond driver control paths vary between modes that have a primary slave
+# (bond_uses_primary()) and others. Test both kinds of modes.
+
+bond_cleanup_mode1()
+{
+	RET=0
+
+	test_LAG_cleanup "bonding" "active-backup"
+}
+
+bond_cleanup_mode4() {
+	RET=0
+
+	test_LAG_cleanup "bonding" "802.3ad"
+}
+
+bond_listen_lacpdu_multicast()
+{
+	# Initial state of bond device, up | down
+	local init_state=$1
+	local lacpdu_mc="01:80:c2:00:00:02"
+
+	ip link add dummy1 type dummy
+	ip link add bond1 "$init_state" type bond mode 802.3ad
+	ip link set dev dummy1 master bond1
+	if [ "$init_state" = "down" ]; then
+		ip link set dev bond1 up
+	fi
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (1)"
+
+	ip link set dev bond1 down
+
+	not grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address still present on slave"
+
+	ip link set dev bond1 up
+
+	grep_bridge_fdb "$lacpdu_mc" bridge fdb show brport dummy1 >/dev/null
+	check_err $? "LACPDU multicast address not present on slave (2)"
+
+	cleanup
+
+	log_test "bonding LACPDU multicast address to slave (from bond $init_state)"
+}
+
+# The LACPDU mc addr is added by different paths depending on the initial state
+# of the bond when enslaving a device. Test both cases.
+
+bond_listen_lacpdu_multicast_case_down()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "down"
+}
+
+bond_listen_lacpdu_multicast_case_up()
+{
+	RET=0
+
+	bond_listen_lacpdu_multicast "up"
+}
+
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/lag_lib.sh b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
new file mode 100644
index 0000000000..2a268b17b6
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/lag_lib.sh
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NAMESPACES=""
+
+# Test that a link aggregation device (bonding, team) removes the hardware
+# addresses that it adds on its underlying devices.
+test_LAG_cleanup()
+{
+	local driver=$1
+	local mode=$2
+	local ucaddr="02:00:00:12:34:56"
+	local addr6="fe80::78:9abc/64"
+	local mcaddr="33:33:ff:78:9a:bc"
+	local name
+
+	ip link add dummy1 type dummy
+	ip link add dummy2 type dummy
+	if [ "$driver" = "bonding" ]; then
+		name="bond1"
+		ip link add "$name" up type bond mode "$mode"
+		ip link set dev dummy1 master "$name"
+		ip link set dev dummy2 master "$name"
+	elif [ "$driver" = "team" ]; then
+		name="team0"
+		teamd -d -c '
+			{
+				"device": "'"$name"'",
+				"runner": {
+					"name": "'"$mode"'"
+				},
+				"ports": {
+					"dummy1":
+						{},
+					"dummy2":
+						{}
+				}
+			}
+		'
+		ip link set dev "$name" up
+	else
+		check_err 1
+		log_test test_LAG_cleanup ": unknown driver \"$driver\""
+		return
+	fi
+
+	# Used to test dev->uc handling
+	ip link add mv0 link "$name" up address "$ucaddr" type macvlan
+	# Used to test dev->mc handling
+	ip address add "$addr6" dev "$name"
+	ip link set dev "$name" down
+	ip link del "$name"
+
+	not grep_bridge_fdb "$ucaddr" bridge fdb show >/dev/null
+	check_err $? "macvlan unicast address still present on a slave"
+
+	not grep_bridge_fdb "$mcaddr" bridge fdb show >/dev/null
+	check_err $? "IPv6 solicited-node multicast mac address still present on a slave"
+
+	cleanup
+
+	log_test "$driver cleanup mode $mode"
+}
+
+# Build a generic 2 node net namespace with 2 connections
+# between the namespaces
+#
+#  +-----------+       +-----------+
+#  | node1     |       | node2     |
+#  |           |       |           |
+#  |           |       |           |
+#  |      eth0 +-------+ eth0      |
+#  |           |       |           |
+#  |      eth1 +-------+ eth1      |
+#  |           |       |           |
+#  +-----------+       +-----------+
+lag_setup2x2()
+{
+	local state=${1:-down}
+	local namespaces="lag_node1 lag_node2"
+
+	# create namespaces
+	for n in ${namespaces}; do
+		ip netns add ${n}
+	done
+
+	# wire up namespaces
+	ip link add name lag1 type veth peer name lag1-end
+	ip link set dev lag1 netns lag_node1 $state name eth0
+	ip link set dev lag1-end netns lag_node2 $state name eth0
+
+	ip link add name lag1 type veth peer name lag1-end
+	ip link set dev lag1 netns lag_node1 $state name eth1
+	ip link set dev lag1-end netns lag_node2 $state name eth1
+
+	NAMESPACES="${namespaces}"
+}
+
+# cleanup all lag related namespaces and remove the bonding module
+lag_cleanup()
+{
+	for n in ${NAMESPACES}; do
+		ip netns delete ${n} >/dev/null 2>&1 || true
+	done
+	modprobe -r bonding
+}
+
+SWITCH="lag_node1"
+CLIENT="lag_node2"
+CLIENTIP="172.20.2.1"
+SWITCHIP="172.20.2.2"
+
+lag_setup_network()
+{
+	lag_setup2x2 "down"
+
+	# create switch
+	ip netns exec ${SWITCH} ip link add br0 up type bridge
+	ip netns exec ${SWITCH} ip link set eth0 master br0 up
+	ip netns exec ${SWITCH} ip link set eth1 master br0 up
+	ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0
+}
+
+lag_reset_network()
+{
+	ip netns exec ${CLIENT} ip link del bond0
+	ip netns exec ${SWITCH} ip link set eth0 up
+	ip netns exec ${SWITCH} ip link set eth1 up
+}
+
+create_bond()
+{
+	# create client
+	ip netns exec ${CLIENT} ip link set eth0 down
+	ip netns exec ${CLIENT} ip link set eth1 down
+
+	ip netns exec ${CLIENT} ip link add bond0 type bond $@
+	ip netns exec ${CLIENT} ip link set eth0 master bond0
+	ip netns exec ${CLIENT} ip link set eth1 master bond0
+	ip netns exec ${CLIENT} ip link set bond0 up
+	ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0
+}
+
+test_bond_recovery()
+{
+	RET=0
+
+	create_bond $@
+
+	# verify connectivity
+	ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+	check_err $? "No connectivity"
+
+	# force the links of the bond down
+	ip netns exec ${SWITCH} ip link set eth0 down
+	sleep 2
+	ip netns exec ${SWITCH} ip link set eth0 up
+	ip netns exec ${SWITCH} ip link set eth1 down
+
+	# re-verify connectivity
+	ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+
+	local rc=$?
+	check_err $rc "Bond failed to recover"
+	log_test "$1 ($2) bond recovery"
+	lag_reset_network
+}
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
new file mode 100755
index 0000000000..b76bf50309
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#  When the bond is configured with down/updelay and the link state of
+#  slave members flaps if there are no remaining members up the bond
+#  should immediately select a member to bring up. (from bonding.txt
+#  section 13.1 paragraph 4)
+#
+#  +-------------+       +-----------+
+#  | client      |       | switch    |
+#  |             |       |           |
+#  |    +--------| link1 |-----+     |
+#  |    |        +-------+     |     |
+#  |    |        |       |     |     |
+#  |    |        +-------+     |     |
+#  |    | bond   | link2 | Br0 |     |
+#  +-------------+       +-----------+
+#     172.20.2.1           172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+	lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 1 miimon 100 updelay 0
+test_bond_recovery mode 1 miimon 100 updelay 200
+test_bond_recovery mode 1 miimon 100 updelay 500
+test_bond_recovery mode 1 miimon 100 updelay 1000
+test_bond_recovery mode 1 miimon 100 updelay 2000
+test_bond_recovery mode 1 miimon 100 updelay 5000
+test_bond_recovery mode 1 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
new file mode 100755
index 0000000000..8c26190021
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#  When the bond is configured with down/updelay and the link state of
+#  slave members flaps if there are no remaining members up the bond
+#  should immediately select a member to bring up. (from bonding.txt
+#  section 13.1 paragraph 4)
+#
+#  +-------------+       +-----------+
+#  | client      |       | switch    |
+#  |             |       |           |
+#  |    +--------| link1 |-----+     |
+#  |    |        +-------+     |     |
+#  |    |        |       |     |     |
+#  |    |        +-------+     |     |
+#  |    | bond   | link2 | Br0 |     |
+#  +-------------+       +-----------+
+#     172.20.2.1           172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+	lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 2 miimon 100 updelay 0
+test_bond_recovery mode 2 miimon 100 updelay 200
+test_bond_recovery mode 2 miimon 100 updelay 500
+test_bond_recovery mode 2 miimon 100 updelay 1000
+test_bond_recovery mode 2 miimon 100 updelay 2000
+test_bond_recovery mode 2 miimon 100 updelay 5000
+test_bond_recovery mode 2 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
diff --git a/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh
new file mode 120000
index 0000000000..39c96828c5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/net_forwarding_lib.sh
@@ -0,0 +1 @@
+../../../net/forwarding/lib.sh
\ No newline at end of file
diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings
new file mode 100644
index 0000000000..79b65bdf05
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/settings
@@ -0,0 +1 @@
+timeout=1200