Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

131 files changed, 36148 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/.gitignore b/tools/testing/selftests/net/forwarding/.gitignore
new file mode 100644
index 0000000000..2dea317f12
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+forwarding.config
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
new file mode 100644
index 0000000000..74e754e266
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+TEST_PROGS = bridge_igmp.sh \
+	bridge_locked_port.sh \
+	bridge_mdb.sh \
+	bridge_mdb_host.sh \
+	bridge_mdb_max.sh \
+	bridge_mdb_port_down.sh \
+	bridge_mld.sh \
+	bridge_port_isolation.sh \
+	bridge_sticky_fdb.sh \
+	bridge_vlan_aware.sh \
+	bridge_vlan_mcast.sh \
+	bridge_vlan_unaware.sh \
+	custom_multipath_hash.sh \
+	dual_vxlan_bridge.sh \
+	ethtool_extended_state.sh \
+	ethtool_mm.sh \
+	ethtool.sh \
+	gre_custom_multipath_hash.sh \
+	gre_inner_v4_multipath.sh \
+	gre_inner_v6_multipath.sh \
+	gre_multipath_nh_res.sh \
+	gre_multipath_nh.sh \
+	gre_multipath.sh \
+	hw_stats_l3.sh \
+	hw_stats_l3_gre.sh \
+	ip6_forward_instats_vrf.sh \
+	ip6gre_custom_multipath_hash.sh \
+	ip6gre_flat_key.sh \
+	ip6gre_flat_keys.sh \
+	ip6gre_flat.sh \
+	ip6gre_hier_key.sh \
+	ip6gre_hier_keys.sh \
+	ip6gre_hier.sh \
+	ip6gre_inner_v4_multipath.sh \
+	ip6gre_inner_v6_multipath.sh \
+	ipip_flat_gre_key.sh \
+	ipip_flat_gre_keys.sh \
+	ipip_flat_gre.sh \
+	ipip_hier_gre_key.sh \
+	ipip_hier_gre_keys.sh \
+	ipip_hier_gre.sh \
+	local_termination.sh \
+	loopback.sh \
+	mirror_gre_bound.sh \
+	mirror_gre_bridge_1d.sh \
+	mirror_gre_bridge_1d_vlan.sh \
+	mirror_gre_bridge_1q_lag.sh \
+	mirror_gre_bridge_1q.sh \
+	mirror_gre_changes.sh \
+	mirror_gre_flower.sh \
+	mirror_gre_lag_lacp.sh \
+	mirror_gre_neigh.sh \
+	mirror_gre_nh.sh \
+	mirror_gre.sh \
+	mirror_gre_vlan_bridge_1q.sh \
+	mirror_gre_vlan.sh \
+	mirror_vlan.sh \
+	no_forwarding.sh \
+	pedit_dsfield.sh \
+	pedit_ip.sh \
+	pedit_l4port.sh \
+	q_in_vni_ipv6.sh \
+	q_in_vni.sh \
+	router_bridge.sh \
+	router_bridge_1d.sh \
+	router_bridge_1d_lag.sh \
+	router_bridge_lag.sh \
+	router_bridge_vlan.sh \
+	router_bridge_vlan_upper.sh \
+	router_bridge_pvid_vlan_upper.sh \
+	router_bridge_vlan_upper_pvid.sh \
+	router_broadcast.sh \
+	router_mpath_nh_res.sh \
+	router_mpath_nh.sh \
+	router_multicast.sh \
+	router_multipath.sh \
+	router_nh.sh \
+	router.sh \
+	router_vid_1.sh \
+	sch_ets.sh \
+	sch_red.sh \
+	sch_tbf_ets.sh \
+	sch_tbf_prio.sh \
+	sch_tbf_root.sh \
+	skbedit_priority.sh \
+	tc_actions.sh \
+	tc_chains.sh \
+	tc_flower_router.sh \
+	tc_flower.sh \
+	tc_flower_l2_miss.sh \
+	tc_flower_cfm.sh \
+	tc_flower_port_range.sh \
+	tc_mpls_l2vpn.sh \
+	tc_police.sh \
+	tc_shblocks.sh \
+	tc_tunnel_key.sh \
+	tc_vlan_modify.sh \
+	vxlan_asymmetric_ipv6.sh \
+	vxlan_asymmetric.sh \
+	vxlan_bridge_1d_ipv6.sh \
+	vxlan_bridge_1d_port_8472_ipv6.sh \
+	vxlan_bridge_1d_port_8472.sh \
+	vxlan_bridge_1d.sh \
+	vxlan_bridge_1q_ipv6.sh \
+	vxlan_bridge_1q_port_8472_ipv6.sh \
+	vxlan_bridge_1q_port_8472.sh \
+	vxlan_bridge_1q.sh \
+	vxlan_symmetric_ipv6.sh \
+	vxlan_symmetric.sh
+
+TEST_PROGS_EXTENDED := devlink_lib.sh \
+	ethtool_lib.sh \
+	fib_offload_lib.sh \
+	forwarding.config.sample \
+	ip6gre_lib.sh \
+	ipip_lib.sh \
+	lib.sh \
+	mirror_gre_lib.sh \
+	mirror_gre_topo_lib.sh \
+	mirror_lib.sh \
+	mirror_topo_lib.sh \
+	sch_ets_core.sh \
+	sch_ets_tests.sh \
+	sch_tbf_core.sh \
+	sch_tbf_etsprio.sh \
+	tc_common.sh
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
new file mode 100644
index 0000000000..b8a2af8fcf
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/README
@@ -0,0 +1,58 @@
+Motivation
+==========
+
+One of the nice things about network namespaces is that they allow one
+to easily create and test complex environments.
+
+Unfortunately, these namespaces can not be used with actual switching
+ASICs, as their ports can not be migrated to other network namespaces
+(NETIF_F_NETNS_LOCAL) and most of them probably do not support the
+L1-separation provided by namespaces.
+
+However, a similar kind of flexibility can be achieved by using VRFs and
+by looping the switch ports together. For example:
+
+                             br0
+                              +
+               vrf-h1         |           vrf-h2
+                 +        +---+----+        +
+                 |        |        |        |
+    192.0.2.1/24 +        +        +        + 192.0.2.2/24
+               swp1     swp2     swp3     swp4
+                 +        +        +        +
+                 |        |        |        |
+                 +--------+        +--------+
+
+The VRFs act as lightweight namespaces representing hosts connected to
+the switch.
+
+This approach for testing switch ASICs has several advantages over the
+traditional method that requires multiple physical machines, to name a
+few:
+
+1. Only the device under test (DUT) is being tested without noise from
+other system.
+
+2. Ability to easily provision complex topologies. Testing bridging
+between 4-ports LAGs or 8-way ECMP requires many physical links that are
+not always available. With the VRF-based approach one merely needs to
+loopback more ports.
+
+These tests are written with switch ASICs in mind, but they can be run
+on any Linux box using veth pairs to emulate physical loopbacks.
+
+Guidelines for Writing Tests
+============================
+
+o Where possible, reuse an existing topology for different tests instead
+  of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+  an ASCII art showing the topology.
+o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
+  RFC 5737, respectively.
+o Where possible, tests shall be written so that they can be reused by
+  multiple topologies and added to lib.sh.
+o Checks shall be added to lib.sh for any external dependencies.
+o Code shall be checked using ShellCheck [1] prior to submission.
+
+1. https://www.shellcheck.net/
diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
new file mode 100755
index 0000000000..2aa66d2a17
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -0,0 +1,564 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="v2reportleave_test v3include_test v3inc_allow_test v3inc_is_include_test \
+	   v3inc_is_exclude_test v3inc_to_exclude_test v3exc_allow_test v3exc_is_include_test \
+	   v3exc_is_exclude_test v3exc_to_exclude_test v3inc_block_test v3exc_block_test \
+	   v3exc_timeout_test v3star_ex_auto_add_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="239.10.10.10"
+TEST_GROUP_MAC="01:00:5e:0a:0a:0a"
+
+ALL_GROUP="224.0.0.1"
+ALL_MAC="01:00:5e:00:00:01"
+
+# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.1,192.0.2.2,192.0.2.3
+MZPKT_IS_INC="22:00:9d:de:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:03"
+# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.10,192.0.2.11,192.0.2.12
+MZPKT_IS_INC2="22:00:9d:c3:00:00:00:01:01:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+# IGMPv3 is_in report: grp 239.10.10.10 is_include 192.0.2.20,192.0.2.30
+MZPKT_IS_INC3="22:00:5f:b4:00:00:00:01:01:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
+# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.10,192.0.2.11,192.0.2.12
+MZPKT_ALLOW="22:00:99:c3:00:00:00:01:05:00:00:03:ef:0a:0a:0a:c0:00:02:0a:c0:00:02:0b:c0:00:02:0c"
+# IGMPv3 allow report: grp 239.10.10.10 allow 192.0.2.20,192.0.2.30
+MZPKT_ALLOW2="22:00:5b:b4:00:00:00:01:05:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
+# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.1,192.0.2.2,192.0.2.20,192.0.2.21
+MZPKT_IS_EXC="22:00:da:b6:00:00:00:01:02:00:00:04:ef:0a:0a:0a:c0:00:02:01:c0:00:02:02:c0:00:02:14:c0:00:02:15"
+# IGMPv3 is_ex report: grp 239.10.10.10 is_exclude 192.0.2.20,192.0.2.30
+MZPKT_IS_EXC2="22:00:5e:b4:00:00:00:01:02:00:00:02:ef:0a:0a:0a:c0:00:02:14:c0:00:02:1e"
+# IGMPv3 to_ex report: grp 239.10.10.10 to_exclude 192.0.2.1,192.0.2.20,192.0.2.30
+MZPKT_TO_EXC="22:00:9a:b1:00:00:00:01:04:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
+# IGMPv3 block report: grp 239.10.10.10 block 192.0.2.1,192.0.2.20,192.0.2.30
+MZPKT_BLOCK="22:00:98:b1:00:00:00:01:06:00:00:03:ef:0a:0a:0a:c0:00:02:01:c0:00:02:14:c0:00:02:1e"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+v2reportleave_test()
+{
+	RET=0
+	ip address add dev $h2 $TEST_GROUP/32 autojoin
+	check_err $? "Could not join $TEST_GROUP"
+
+	sleep 5
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_err $? "IGMPv2 report didn't create mdb entry for $TEST_GROUP"
+
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
+	check_fail $? "Traffic to $TEST_GROUP wasn't forwarded"
+
+	log_test "IGMPv2 report $TEST_GROUP"
+
+	RET=0
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_err $? "mdb entry for $TEST_GROUP is missing"
+
+	ip address del dev $h2 $TEST_GROUP/32
+	check_err $? "Could not leave $TEST_GROUP"
+
+	sleep 5
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_fail $? "Leave didn't delete mdb entry for $TEST_GROUP"
+
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
+	check_err $? "Traffic to $TEST_GROUP was forwarded without mdb entry"
+
+	log_test "IGMPv2 leave $TEST_GROUP"
+}
+
+v3include_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.3")
+
+	ip link set dev br0 type bridge mcast_igmp_version 3
+	check_err $? "Could not change bridge IGMP version to 3"
+
+	$MZ $host1_if -b $mac -c 1 -B $group -t ip "proto=2,p=$MZPKT_IS_INC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null)" &>/dev/null
+	check_err $? "Missing *,G entry with source list"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+}
+
+v3exclude_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local pkt=$4
+	local X=("192.0.2.1" "192.0.2.2")
+	local Y=("192.0.2.20" "192.0.2.21")
+
+	v3include_prepare $host1_if $mac $group
+
+	$MZ $host1_if -c 1 -b $mac -B $group -t ip "proto=2,p=$MZPKT_IS_EXC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.3\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.3 entry still exists"
+}
+
+v3cleanup()
+{
+	local port=$1
+	local group=$2
+
+	bridge mdb del dev br0 port $port grp $group
+	ip link set dev br0 type bridge mcast_igmp_version 2
+}
+
+v3include_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.3")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_allow_test()
+{
+	RET=0
+	local X=("192.0.2.10" "192.0.2.11" "192.0.2.12")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW" -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> allow"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_is_include_test()
+{
+	RET=0
+	local X=("192.0.2.10" "192.0.2.11" "192.0.2.12")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC2" -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_is_exclude_test()
+{
+	RET=0
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> is_exclude"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_to_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.1")
+	local Y=("192.0.2.20" "192.0.2.30")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_TO_EXC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.21\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.21 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_allow_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.20" "192.0.2.30")
+	local Y=("192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW2" -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> allow"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_is_include_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.20" "192.0.2.30")
+	local Y=("192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC3" -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> is_include"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_is_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.30")
+	local Y=("192.0.2.20")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_EXC2" -q
+	sleep 1
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> is_exclude"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_to_exclude_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.30")
+	local Y=("192.0.2.20")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_TO_EXC" -q
+	sleep 1
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3inc_block_test()
+{
+	RET=0
+	local X=("192.0.2.2" "192.0.2.3")
+
+	v3include_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q
+	# make sure the lowered timers have expired (by default 2 seconds)
+	sleep 3
+	brmcast_check_sg_entries "block" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "192.0.2.100"
+
+	log_test "IGMPv3 report $TEST_GROUP include -> block"
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_block_test()
+{
+	RET=0
+	local X=("192.0.2.1" "192.0.2.2" "192.0.2.30")
+	local Y=("192.0.2.20" "192.0.2.21")
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_BLOCK" -q
+	sleep 1
+	brmcast_check_sg_entries "block" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 192.0.2.100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "IGMPv3 report $TEST_GROUP exclude -> block"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3exc_timeout_test()
+{
+	RET=0
+	local X=("192.0.2.20" "192.0.2.30")
+
+	# GMI should be 3 seconds
+	ip link set dev br0 type bridge mcast_query_interval 100 \
+					mcast_query_response_interval 100 \
+					mcast_membership_interval 300
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+	ip link set dev br0 type bridge mcast_query_interval 500 \
+					mcast_query_response_interval 500 \
+					mcast_membership_interval 1500
+
+	$MZ $h1 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_ALLOW2" -q
+	sleep 3
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.1 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"192.0.2.2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 192.0.2.2 entry still exists"
+
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 192.0.2.100
+
+	log_test "IGMPv3 group $TEST_GROUP exclude timeout"
+
+	ip link set dev br0 type bridge mcast_query_interval 12500 \
+					mcast_query_response_interval 1000 \
+					mcast_membership_interval 26000
+
+	v3cleanup $swp1 $TEST_GROUP
+}
+
+v3star_ex_auto_add_test()
+{
+	RET=0
+
+	v3exclude_prepare $h1 $ALL_MAC $ALL_GROUP
+
+	$MZ $h2 -c 1 -b $ALL_MAC -B $ALL_GROUP -t ip "proto=2,p=$MZPKT_IS_INC" -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"192.0.2.3\" and \
+				.port == \"$swp1\")" &>/dev/null
+	check_err $? "S,G entry for *,G port doesn't exist"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"192.0.2.3\" and \
+				.port == \"$swp1\" and \
+				.flags[] == \"added_by_star_ex\")" &>/dev/null
+	check_err $? "Auto-added S,G entry doesn't have added_by_star_ex flag"
+
+	brmcast_check_sg_fwding 1 192.0.2.3
+
+	log_test "IGMPv3 S,G port entry automatic add to a *,G port"
+
+	v3cleanup $swp1 $TEST_GROUP
+	v3cleanup $swp2 $TEST_GROUP
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_locked_port.sh b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
new file mode 100755
index 0000000000..9af9f69648
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_locked_port.sh
@@ -0,0 +1,365 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	locked_port_ipv4
+	locked_port_ipv6
+	locked_port_vlan
+	locked_port_mab
+	locked_port_mab_roam
+	locked_port_mab_config
+	locked_port_mab_flush
+	locked_port_mab_redirect
+"
+
+NUM_NETIFS=4
+CHECK_TC="no"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+	vlan_create $h1 100 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 100
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+	vlan_create $h2 100 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 100
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge vlan_filtering 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	bridge link set dev $swp1 learning off
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+locked_port_ipv4()
+{
+	RET=0
+
+	check_locked_port_support || return 0
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work before locking port"
+
+	bridge link set dev $swp1 locked on
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked after locking port, but before adding FDB entry"
+
+	bridge fdb add `mac_get $h1` dev $swp1 master static
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work after locking port and adding FDB entry"
+
+	bridge link set dev $swp1 locked off
+	bridge fdb del `mac_get $h1` dev $swp1 master static
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work after unlocking port and removing FDB entry."
+
+	log_test "Locked port ipv4"
+}
+
+locked_port_vlan()
+{
+	RET=0
+
+	check_locked_port_support || return 0
+
+	bridge vlan add vid 100 dev $swp1
+	bridge vlan add vid 100 dev $swp2
+
+	ping_do $h1.100 198.51.100.2
+	check_err $? "Ping through vlan did not work before locking port"
+
+	bridge link set dev $swp1 locked on
+	ping_do $h1.100 198.51.100.2
+	check_fail $? "Ping through vlan worked after locking port, but before adding FDB entry"
+
+	bridge fdb add `mac_get $h1` dev $swp1 vlan 100 master static
+
+	ping_do $h1.100 198.51.100.2
+	check_err $? "Ping through vlan did not work after locking port and adding FDB entry"
+
+	bridge link set dev $swp1 locked off
+	bridge fdb del `mac_get $h1` dev $swp1 vlan 100 master static
+
+	ping_do $h1.100 198.51.100.2
+	check_err $? "Ping through vlan did not work after unlocking port and removing FDB entry"
+
+	bridge vlan del vid 100 dev $swp1
+	bridge vlan del vid 100 dev $swp2
+	log_test "Locked port vlan"
+}
+
+locked_port_ipv6()
+{
+	RET=0
+	check_locked_port_support || return 0
+
+	ping6_do $h1 2001:db8:1::2
+	check_err $? "Ping6 did not work before locking port"
+
+	bridge link set dev $swp1 locked on
+
+	ping6_do $h1 2001:db8:1::2
+	check_fail $? "Ping6 worked after locking port, but before adding FDB entry"
+
+	bridge fdb add `mac_get $h1` dev $swp1 master static
+	ping6_do $h1 2001:db8:1::2
+	check_err $? "Ping6 did not work after locking port and adding FDB entry"
+
+	bridge link set dev $swp1 locked off
+	bridge fdb del `mac_get $h1` dev $swp1 master static
+
+	ping6_do $h1 2001:db8:1::2
+	check_err $? "Ping6 did not work after unlocking port and removing FDB entry"
+
+	log_test "Locked port ipv6"
+}
+
+locked_port_mab()
+{
+	RET=0
+	check_port_mab_support || return 0
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work before locking port"
+
+	bridge link set dev $swp1 learning on locked on
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked on a locked port without an FDB entry"
+
+	bridge fdb get `mac_get $h1` br br0 vlan 1 &> /dev/null
+	check_fail $? "FDB entry created before enabling MAB"
+
+	bridge link set dev $swp1 learning on locked on mab on
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked on MAB enabled port without an FDB entry"
+
+	bridge fdb get `mac_get $h1` br br0 vlan 1 | grep "dev $swp1" | grep -q "locked"
+	check_err $? "Locked FDB entry not created"
+
+	bridge fdb replace `mac_get $h1` dev $swp1 master static
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work after replacing FDB entry"
+
+	bridge fdb get `mac_get $h1` br br0 vlan 1 | grep "dev $swp1" | grep -q "locked"
+	check_fail $? "FDB entry marked as locked after replacement"
+
+	bridge fdb del `mac_get $h1` dev $swp1 master
+	bridge link set dev $swp1 learning off locked off mab off
+
+	log_test "Locked port MAB"
+}
+
+# Check that entries cannot roam to a locked port, but that entries can roam
+# to an unlocked port.
+locked_port_mab_roam()
+{
+	local mac=a0:b0:c0:c0:b0:a0
+
+	RET=0
+	check_port_mab_support || return 0
+
+	bridge link set dev $swp1 learning on locked on mab on
+
+	$MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand
+	bridge fdb get $mac br br0 vlan 1 | grep "dev $swp1" | grep -q "locked"
+	check_err $? "No locked entry on first injection"
+
+	$MZ $h2 -q -c 5 -d 100msec -t udp -a $mac -b rand
+	bridge fdb get $mac br br0 vlan 1 | grep -q "dev $swp2"
+	check_err $? "Entry did not roam to an unlocked port"
+
+	bridge fdb get $mac br br0 vlan 1 | grep -q "locked"
+	check_fail $? "Entry roamed with locked flag on"
+
+	$MZ $h1 -q -c 5 -d 100msec -t udp -a $mac -b rand
+	bridge fdb get $mac br br0 vlan 1 | grep -q "dev $swp1"
+	check_fail $? "Entry roamed back to locked port"
+
+	bridge fdb del $mac vlan 1 dev $swp2 master
+	bridge link set dev $swp1 learning off locked off mab off
+
+	log_test "Locked port MAB roam"
+}
+
+# Check that MAB can only be enabled on a port that is both locked and has
+# learning enabled.
+locked_port_mab_config()
+{
+	RET=0
+	check_port_mab_support || return 0
+
+	bridge link set dev $swp1 learning on locked off mab on &> /dev/null
+	check_fail $? "MAB enabled while port is unlocked"
+
+	bridge link set dev $swp1 learning off locked on mab on &> /dev/null
+	check_fail $? "MAB enabled while port has learning disabled"
+
+	bridge link set dev $swp1 learning on locked on mab on
+	check_err $? "Failed to enable MAB when port is locked and has learning enabled"
+
+	bridge link set dev $swp1 learning off locked off mab off
+
+	log_test "Locked port MAB configuration"
+}
+
+# Check that locked FDB entries are flushed from a port when MAB is disabled.
+locked_port_mab_flush()
+{
+	local locked_mac1=00:01:02:03:04:05
+	local unlocked_mac1=00:01:02:03:04:06
+	local locked_mac2=00:01:02:03:04:07
+	local unlocked_mac2=00:01:02:03:04:08
+
+	RET=0
+	check_port_mab_support || return 0
+
+	bridge link set dev $swp1 learning on locked on mab on
+	bridge link set dev $swp2 learning on locked on mab on
+
+	# Create regular and locked FDB entries on each port.
+	bridge fdb add $unlocked_mac1 dev $swp1 vlan 1 master static
+	bridge fdb add $unlocked_mac2 dev $swp2 vlan 1 master static
+
+	$MZ $h1 -q -c 5 -d 100msec -t udp -a $locked_mac1 -b rand
+	bridge fdb get $locked_mac1 br br0 vlan 1 | grep "dev $swp1" | \
+		grep -q "locked"
+	check_err $? "Failed to create locked FDB entry on first port"
+
+	$MZ $h2 -q -c 5 -d 100msec -t udp -a $locked_mac2 -b rand
+	bridge fdb get $locked_mac2 br br0 vlan 1 | grep "dev $swp2" | \
+		grep -q "locked"
+	check_err $? "Failed to create locked FDB entry on second port"
+
+	# Disable MAB on the first port and check that only the first locked
+	# FDB entry was flushed.
+	bridge link set dev $swp1 mab off
+
+	bridge fdb get $unlocked_mac1 br br0 vlan 1 &> /dev/null
+	check_err $? "Regular FDB entry on first port was flushed after disabling MAB"
+
+	bridge fdb get $unlocked_mac2 br br0 vlan 1 &> /dev/null
+	check_err $? "Regular FDB entry on second port was flushed after disabling MAB"
+
+	bridge fdb get $locked_mac1 br br0 vlan 1 &> /dev/null
+	check_fail $? "Locked FDB entry on first port was not flushed after disabling MAB"
+
+	bridge fdb get $locked_mac2 br br0 vlan 1 &> /dev/null
+	check_err $? "Locked FDB entry on second port was flushed after disabling MAB"
+
+	bridge fdb del $unlocked_mac2 dev $swp2 vlan 1 master static
+	bridge fdb del $unlocked_mac1 dev $swp1 vlan 1 master static
+
+	bridge link set dev $swp2 learning on locked off mab off
+	bridge link set dev $swp1 learning off locked off mab off
+
+	log_test "Locked port MAB FDB flush"
+}
+
+# Check that traffic can be redirected from a locked bridge port and that it
+# does not create locked FDB entries.
+locked_port_mab_redirect()
+{
+	RET=0
+	check_port_mab_support || return 0
+
+	bridge link set dev $swp1 learning on locked on mab on
+	tc qdisc add dev $swp1 clsact
+	tc filter add dev $swp1 ingress protocol all pref 1 handle 101 flower \
+		action mirred egress redirect dev $swp2
+
+	ping_do $h1 192.0.2.2
+	check_err $? "Ping did not work with redirection"
+
+	bridge fdb get `mac_get $h1` br br0 vlan 1 2> /dev/null | \
+		grep "dev $swp1" | grep -q "locked"
+	check_fail $? "Locked entry created for redirected traffic"
+
+	tc filter del dev $swp1 ingress protocol all pref 1 handle 101 flower
+
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked without redirection"
+
+	bridge fdb get `mac_get $h1` br br0 vlan 1 2> /dev/null | \
+		grep "dev $swp1" | grep -q "locked"
+	check_err $? "Locked entry not created after deleting filter"
+
+	bridge fdb del `mac_get $h1` vlan 1 dev $swp1 master
+	tc qdisc del dev $swp1 clsact
+	bridge link set dev $swp1 learning off locked off mab off
+
+	log_test "Locked port MAB redirect"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
new file mode 100755
index 0000000000..d0c6c499d5
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh
@@ -0,0 +1,1222 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# | + $h1.10              |                          | + $h2.10               |
+# | | 192.0.2.1/28        |                          | | 192.0.2.2/28         |
+# | | 2001:db8:1::1/64    |                          | | 2001:db8:1::2/64     |
+# | |                     |                          | |                      |
+# | |  + $h1.20           |                          | |  + $h2.20            |
+# | \  | 198.51.100.1/24  |                          | \  | 198.51.100.2/24   |
+# |  \ | 2001:db8:2::1/64 |                          |  \ | 2001:db8:2::2/64  |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR0 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | +-----------------------------------------------------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	cfg_test
+	fwd_test
+	ctrl_test
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	simple_if_fini $h2
+}
+
+switch_create()
+{
+	ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 1 mcast_igmp_version 3 mcast_mld_version 2
+	bridge vlan add vid 10 dev br0 self
+	bridge vlan add vid 20 dev br0 self
+	ip link set dev br0 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br0
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	tc qdisc add dev br0 clsact
+	tc qdisc add dev $h2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	tc qdisc del dev br0 clsact
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev br0 down
+	bridge vlan del vid 20 dev br0 self
+	bridge vlan del vid 10 dev br0 self
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+cfg_test_host_common()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local src=$1; shift
+	local state=$1; shift
+	local invalid_state=$1; shift
+
+	RET=0
+
+	# Check basic add, replace and delete behavior.
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp"
+	check_err $? "Failed to add $name host entry"
+
+	bridge mdb replace dev br0 port br0 grp $grp $state vid 10 &> /dev/null
+	check_fail $? "Managed to replace $name host entry"
+
+	bridge mdb del dev br0 port br0 grp $grp $state vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp"
+	check_fail $? "Failed to delete $name host entry"
+
+	# Check error cases.
+	bridge mdb add dev br0 port br0 grp $grp $invalid_state vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name host entry with a $invalid_state state"
+
+	bridge mdb add dev br0 port br0 grp $grp src $src $state vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name host entry with a source"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		filter_mode exclude &> /dev/null
+	check_fail $? "Managed to add $name host entry with a filter mode"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		source_list $src &> /dev/null
+	check_fail $? "Managed to add $name host entry with a source list"
+
+	bridge mdb add dev br0 port br0 grp $grp $state vid 10 \
+		proto 123 &> /dev/null
+	check_fail $? "Managed to add $name host entry with a protocol"
+
+	log_test "Common host entries configuration tests ($name)"
+}
+
+# Check configuration of host entries from all types.
+cfg_test_host()
+{
+	echo
+	log_info "# Host entries configuration tests"
+
+	cfg_test_host_common "IPv4" "239.1.1.1" "192.0.2.1" "temp" "permanent"
+	cfg_test_host_common "IPv6" "ff0e::1" "2001:db8:1::1" "temp" "permanent"
+	cfg_test_host_common "L2" "01:02:03:04:05:06" "00:00:00:00:00:01" \
+		"permanent" "temp"
+}
+
+cfg_test_port_common()
+{
+	local name=$1;shift
+	local grp_key=$1; shift
+
+	RET=0
+
+	# Check basic add, replace and delete behavior.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_err $? "Failed to add $name entry"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
+		&> /dev/null
+	check_err $? "Failed to replace $name entry"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_fail $? "Failed to delete $name entry"
+
+	# Check default protocol and replacement.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "static"
+	check_err $? "$name entry not added with default \"static\" protocol"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key permanent vid 10 \
+		proto 123
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "123"
+	check_err $? "Failed to replace protocol of $name entry"
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+
+	# Check behavior when VLAN is not specified.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_err $? "$name entry with VLAN 10 not added when VLAN was not specified"
+	bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+	check_err $? "$name entry with VLAN 20 not added when VLAN was not specified"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent
+	bridge mdb show dev br0 vid 10 | grep -q "$grp_key"
+	check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified"
+	bridge mdb show dev br0 vid 20 | grep -q "$grp_key"
+	check_fail $? "$name entry with VLAN 20 not deleted when VLAN was not specified"
+
+	# Check behavior when bridge port is down.
+	ip link set dev $swp1 down
+
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	check_err $? "Failed to add $name permanent entry when bridge port is down"
+
+	bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10
+
+	bridge mdb add dev br0 port $swp1 $grp_key temp vid 10 &> /dev/null
+	check_fail $? "Managed to add $name temporary entry when bridge port is down"
+
+	ip link set dev $swp1 up
+	setup_wait_dev $swp1
+
+	# Check error cases.
+	ip link set dev br0 down
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10 \
+		&> /dev/null
+	check_fail $? "Managed to add $name entry when bridge is down"
+	ip link set dev br0 up
+
+	ip link set dev br0 type bridge mcast_snooping 0
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid \
+		10 &> /dev/null
+	check_fail $? "Managed to add $name entry when multicast snooping is disabled"
+	ip link set dev br0 type bridge mcast_snooping 1
+
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 5000 \
+		&> /dev/null
+	check_fail $? "Managed to add $name entry with an invalid VLAN"
+
+	log_test "Common port group entries configuration tests ($name)"
+}
+
+src_list_create()
+{
+	local src_prefix=$1; shift
+	local num_srcs=$1; shift
+	local src_list
+	local i
+
+	for i in $(seq 1 $num_srcs); do
+		src_list=${src_list},${src_prefix}${i}
+	done
+
+	echo $src_list | cut -c 2-
+}
+
+__cfg_test_port_ip_star_g()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local invalid_grp=$1; shift
+	local src_prefix=$1; shift
+	local src1=${src_prefix}1
+	local src2=${src_prefix}2
+	local src3=${src_prefix}3
+	local max_srcs=31
+	local num_srcs
+
+	RET=0
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "exclude"
+	check_err $? "Default filter mode is not \"exclude\""
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check basic add and delete behavior.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+	check_err $? "(*, G) entry not created"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry not created"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q -v "src"
+	check_fail $? "(*, G) entry not deleted"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_fail $? "(S, G) entry not deleted"
+
+	## State (permanent / temp) tests.
+
+	# Check that group and source timer are not set for permanent entries.
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "permanent"
+	check_err $? "(*, G) entry not added as \"permanent\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "permanent"
+	check_err $? "(S, G) entry not added as \"permanent\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_err $? "(*, G) \"permanent\" entry has a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_err $? "\"permanent\" source entry has a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is set for temporary (*, G) EXCLUDE, but not
+	# the source timer.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) EXCLUDE entry not added as \"temp\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) \"blocked\" entry not added as \"temp\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_fail $? "(*, G) EXCLUDE entry does not have a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_err $? "\"blocked\" source entry has a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is not set for temporary (*, G) INCLUDE, but
+	# that the source timer is set.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) INCLUDE entry not added as \"temp\" when should"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) entry not added as \"temp\" when should"
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q " 0.00"
+	check_err $? "(*, G) INCLUDE entry has a pending group timer"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "\/0.00"
+	check_fail $? "Source entry does not have a pending source timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that group timer is never set for (S, G) entries.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q " 0.00"
+	check_err $? "(S, G) entry has a pending group timer"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Filter mode (include / exclude) tests.
+
+	# Check that (*, G) INCLUDE entries are added with correct filter mode
+	# and that (S, G) entries are not marked as "blocked".
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode include source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "include"
+	check_err $? "(*, G) INCLUDE not added with \"include\" filter mode"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_fail $? "(S, G) entry marked as \"blocked\" when should not"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that (*, G) EXCLUDE entries are added with correct filter mode
+	# and that (S, G) entries are marked as "blocked".
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "exclude"
+	check_err $? "(*, G) EXCLUDE not added with \"exclude\" filter mode"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_err $? "(S, G) entry not marked as \"blocked\" when should"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Protocol tests.
+
+	# Check that (*, G) and (S, G) entries are added with the specified
+	# protocol.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		filter_mode exclude source_list $src1 proto zebra
+
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "zebra"
+	check_err $? "(*, G) entry not added with \"zebra\" protocol"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "zebra"
+	check_err $? "(S, G) entry not marked added with \"zebra\" protocol"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Replace tests.
+
+	# Check that state can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "permanent"
+	check_err $? "(*, G) entry not marked as \"permanent\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "permanent"
+	check_err $? "(S, G) entry not marked as \"permanent\" after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "temp"
+	check_err $? "(*, G) entry not marked as \"temp\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "temp"
+	check_err $? "(S, G) entry not marked as \"temp\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that filter mode can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode include source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "include"
+	check_err $? "(*, G) not marked with \"include\" filter mode after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_fail $? "(S, G) marked as \"blocked\" after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "exclude"
+	check_err $? "(*, G) not marked with \"exclude\" filter mode after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "blocked"
+	check_err $? "(S, G) not marked as \"blocked\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that sources can be added to and removed from the source list.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1,$src2,$src3
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry for source $src1 not created after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+	check_err $? "(S, G) entry for source $src2 not created after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+	check_err $? "(S, G) entry for source $src3 not created after replace"
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1,$src3
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src1"
+	check_err $? "(S, G) entry for source $src1 not created after second replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src2"
+	check_fail $? "(S, G) entry for source $src2 created after second replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -q "src $src3"
+	check_err $? "(S, G) entry for source $src3 not created after second replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	# Check that protocol can be modified.
+	bridge mdb add dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1 proto zebra
+
+	bridge mdb replace dev br0 port $swp1 grp $grp temp vid 10 \
+		filter_mode exclude source_list $src1 proto bgp
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep -v "src" | \
+		grep -q "bgp"
+	check_err $? "(*, G) protocol not changed to \"bgp\" after replace"
+	bridge -d mdb show dev br0 vid 10 | grep "$grp" | grep "src" | \
+		grep -q "bgp"
+	check_err $? "(S, G) protocol not changed to \"bgp\" after replace"
+
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	## Star exclude tests.
+
+	# Check star exclude functionality. When adding a new EXCLUDE (*, G),
+	# it needs to be also added to all (S, G) entries for proper
+	# replication.
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode include source_list $src1
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$swp1" | grep "$grp" | \
+		grep "$src1" | grep -q "added_by_star_ex"
+	check_err $? "\"added_by_star_ex\" entry not created after adding (*, G) entry"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+	bridge mdb del dev br0 port $swp2 grp $grp src $src1 vid 10
+
+	## Error cases tests.
+
+	bridge mdb add dev br0 port $swp1 grp $invalid_grp vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid group"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		&> /dev/null
+	check_fail $? "Managed to add an INCLUDE entry with an empty source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $grp &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid source in source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 \
+		source_list $src &> /dev/null
+	check_fail $? "Managed to add an entry with a source list and no filter mode"
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $src1
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $src1 &> /dev/null
+	check_fail $? "Managed to replace an entry without using replace"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	bridge mdb add dev br0 port $swp1 grp $grp src $src2 vid 10
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode include \
+		source_list $src1,$src2,$src3 &> /dev/null
+	check_fail $? "Managed to add a source that already has a forwarding entry"
+	bridge mdb del dev br0 port $swp1 grp $grp src $src2 vid 10
+
+	# Check maximum number of sources.
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $(src_list_create $src_prefix $max_srcs)
+	num_srcs=$(bridge -d mdb show dev br0 vid 10 | grep "$grp" | \
+		grep "src" | wc -l)
+	[[ $num_srcs -eq $max_srcs ]]
+	check_err $? "Failed to configure maximum number of sources ($max_srcs)"
+	bridge mdb del dev br0 port $swp1 grp $grp vid 10
+
+	bridge mdb add dev br0 port $swp1 grp $grp vid 10 filter_mode exclude \
+		source_list $(src_list_create $src_prefix $((max_srcs + 1))) \
+		&> /dev/null
+	check_fail $? "Managed to exceed maximum number of sources ($max_srcs)"
+
+	log_test "$name (*, G) port group entries configuration tests"
+}
+
+cfg_test_port_ip_star_g()
+{
+	echo
+	log_info "# Port group entries configuration tests - (*, G)"
+
+	cfg_test_port_common "IPv4 (*, G)" "grp 239.1.1.1"
+	cfg_test_port_common "IPv6 (*, G)" "grp ff0e::1"
+	__cfg_test_port_ip_star_g "IPv4" "239.1.1.1" "224.0.0.1" "192.0.2."
+	__cfg_test_port_ip_star_g "IPv6" "ff0e::1" "ff02::1" "2001:db8:1::"
+}
+
+__cfg_test_port_ip_sg()
+{
+	local name=$1; shift
+	local grp=$1; shift
+	local src=$1; shift
+	local grp_key="grp $grp src $src"
+
+	RET=0
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | grep -q "include"
+	check_err $? "Default filter mode is not \"include\""
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check that entries can be added as both permanent and temp and that
+	# group timer is set correctly.
+	bridge mdb add dev br0 port $swp1 $grp_key permanent vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "permanent"
+	check_err $? "Entry not added as \"permanent\" when should"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q " 0.00"
+	check_err $? "\"permanent\" entry has a pending group timer"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	bridge mdb add dev br0 port $swp1 $grp_key temp vid 10
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "temp"
+	check_err $? "Entry not added as \"temp\" when should"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q " 0.00"
+	check_fail $? "\"temp\" entry has an unpending group timer"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check error cases.
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 \
+		filter_mode include &> /dev/null
+	check_fail $? "Managed to add an entry with a filter mode"
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 \
+		filter_mode include source_list $src &> /dev/null
+	check_fail $? "Managed to add an entry with a source list"
+
+	bridge mdb add dev br0 port $swp1 grp $grp src $grp vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with an invalid source"
+
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 temp
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 permanent &> /dev/null
+	check_fail $? "Managed to replace an entry without using replace"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check that we can replace available attributes.
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10 proto 123
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 proto 111
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "111"
+	check_err $? "Failed to replace protocol"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 permanent
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "permanent"
+	check_err $? "Entry not marked as \"permanent\" after replace"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q " 0.00"
+	check_err $? "Entry has a pending group timer after replace"
+
+	bridge mdb replace dev br0 port $swp1 $grp_key vid 10 temp
+	bridge -d mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q "temp"
+	check_err $? "Entry not marked as \"temp\" after replace"
+	bridge -d -s mdb show dev br0 vid 10 | grep "$grp_key" | \
+		grep -q " 0.00"
+	check_fail $? "Entry has an unpending group timer after replace"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+
+	# Check star exclude functionality. When adding a (S, G), all matching
+	# (*, G) ports need to be added to it.
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10
+	bridge mdb add dev br0 port $swp1 $grp_key vid 10
+	bridge mdb show dev br0 vid 10 | grep "$grp_key" | grep $swp2 | \
+		grep -q "added_by_star_ex"
+	check_err $? "\"added_by_star_ex\" entry not created after adding (S, G) entry"
+	bridge mdb del dev br0 port $swp1 $grp_key vid 10
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	log_test "$name (S, G) port group entries configuration tests"
+}
+
+cfg_test_port_ip_sg()
+{
+	echo
+	log_info "# Port group entries configuration tests - (S, G)"
+
+	cfg_test_port_common "IPv4 (S, G)" "grp 239.1.1.1 src 192.0.2.1"
+	cfg_test_port_common "IPv6 (S, G)" "grp ff0e::1 src 2001:db8:1::1"
+	__cfg_test_port_ip_sg "IPv4" "239.1.1.1" "192.0.2.1"
+	__cfg_test_port_ip_sg "IPv6" "ff0e::1" "2001:db8:1::1"
+}
+
+cfg_test_port_ip()
+{
+	cfg_test_port_ip_star_g
+	cfg_test_port_ip_sg
+}
+
+__cfg_test_port_l2()
+{
+	local grp="01:02:03:04:05:06"
+
+	RET=0
+
+	bridge meb add dev br0 port $swp grp 00:01:02:03:04:05 \
+		permanent vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with unicast MAC"
+
+	bridge mdb add dev br0 port $swp grp $grp src 00:01:02:03:04:05 \
+		permanent vid 10 &> /dev/null
+	check_fail $? "Managed to add an entry with a source"
+
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		filter_mode include &> /dev/null
+	check_fail $? "Managed to add an entry with a filter mode"
+
+	bridge mdb add dev br0 port $swp1 grp $grp permanent vid 10 \
+		source_list 00:01:02:03:04:05 &> /dev/null
+	check_fail $? "Managed to add an entry with a source list"
+
+	log_test "L2 (*, G) port group entries configuration tests"
+}
+
+cfg_test_port_l2()
+{
+	echo
+	log_info "# Port group entries configuration tests - L2"
+
+	cfg_test_port_common "L2 (*, G)" "grp 01:02:03:04:05:06"
+	__cfg_test_port_l2
+}
+
+# Check configuration of regular (port) entries of all types.
+cfg_test_port()
+{
+	cfg_test_port_ip
+	cfg_test_port_l2
+}
+
+ipv4_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "239.1.1.$i"
+	done
+}
+
+ipv6_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "ff0e::$(printf %x $i)"
+	done
+}
+
+l2_grps_get()
+{
+	local max_grps=$1; shift
+	local i
+
+	for i in $(seq 0 $((max_grps - 1))); do
+		echo "01:00:00:00:00:$(printf %02x $i)"
+	done
+}
+
+cfg_test_dump_common()
+{
+	local name=$1; shift
+	local fn=$1; shift
+	local max_bridges=2
+	local max_grps=256
+	local max_ports=32
+	local num_entries
+	local batch_file
+	local grp
+	local i j
+
+	RET=0
+
+	# Create net devices.
+	for i in $(seq 1 $max_bridges); do
+		ip link add name br-test${i} up type bridge vlan_filtering 1 \
+			mcast_snooping 1
+		for j in $(seq 1 $max_ports); do
+			ip link add name br-test${i}-du${j} up \
+				master br-test${i} type dummy
+		done
+	done
+
+	# Create batch file with MDB entries.
+	batch_file=$(mktemp)
+	for i in $(seq 1 $max_bridges); do
+		for j in $(seq 1 $max_ports); do
+			for grp in $($fn $max_grps); do
+				echo "mdb add dev br-test${i} \
+					port br-test${i}-du${j} grp $grp \
+					permanent vid 1" >> $batch_file
+			done
+		done
+	done
+
+	# Program the batch file and check for expected number of entries.
+	bridge -b $batch_file
+	for i in $(seq 1 $max_bridges); do
+		num_entries=$(bridge mdb show dev br-test${i} | \
+			grep "permanent" | wc -l)
+		[[ $num_entries -eq $((max_grps * max_ports)) ]]
+		check_err $? "Wrong number of entries in br-test${i}"
+	done
+
+	# Cleanup.
+	rm $batch_file
+	for i in $(seq 1 $max_bridges); do
+		ip link del dev br-test${i}
+		for j in $(seq $max_ports); do
+			ip link del dev br-test${i}-du${j}
+		done
+	done
+
+	log_test "$name large scale dump tests"
+}
+
+# Check large scale dump.
+cfg_test_dump()
+{
+	echo
+	log_info "# Large scale dump tests"
+
+	cfg_test_dump_common "IPv4" ipv4_grps_get
+	cfg_test_dump_common "IPv6" ipv6_grps_get
+	cfg_test_dump_common "L2" l2_grps_get
+}
+
+cfg_test()
+{
+	cfg_test_host
+	cfg_test_port
+	cfg_test_dump
+}
+
+__fwd_test_host_ip()
+{
+	local grp=$1; shift
+	local dmac=$1; shift
+	local src=$1; shift
+	local mode=$1; shift
+	local name
+	local eth_type
+
+	RET=0
+
+	if [[ $mode == "-4" ]]; then
+		name="IPv4"
+		eth_type="ipv4"
+	else
+		name="IPv6"
+		eth_type="ipv6"
+	fi
+
+	tc filter add dev br0 ingress protocol 802.1q pref 1 handle 1 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp src_ip $src \
+		action drop
+
+	# Packet should only be flooded to multicast router ports when there is
+	# no matching MDB entry. The bridge is not configured as a multicast
+	# router port.
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 0
+	check_err $? "Packet locally received after flood"
+
+	# Install a regular port group entry and expect the packet to not be
+	# locally received.
+	bridge mdb add dev br0 port $swp2 grp $grp temp vid 10
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 0
+	check_err $? "Packet locally received after installing a regular entry"
+
+	# Add a host entry and expect the packet to be locally received.
+	bridge mdb add dev br0 port br0 grp $grp temp vid 10
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet not locally received after adding a host entry"
+
+	# Remove the host entry and expect the packet to not be locally
+	# received.
+	bridge mdb del dev br0 port br0 grp $grp vid 10
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $src -B $grp -t udp -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet locally received after removing a host entry"
+
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	tc filter del dev br0 ingress protocol 802.1q pref 1 handle 1 flower
+
+	log_test "$name host entries forwarding tests"
+}
+
+fwd_test_host_ip()
+{
+	__fwd_test_host_ip "239.1.1.1" "01:00:5e:01:01:01" "192.0.2.1" "-4"
+	__fwd_test_host_ip "ff0e::1" "33:33:00:00:00:01" "2001:db8:1::1" "-6"
+}
+
+fwd_test_host_l2()
+{
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev br0 ingress protocol all pref 1 handle 1 flower \
+		dst_mac $dmac action drop
+
+	# Packet should be flooded and locally received when there is no
+	# matching MDB entry.
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet not locally received after flood"
+
+	# Install a regular port group entry and expect the packet to not be
+	# locally received.
+	bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 1
+	check_err $? "Packet locally received after installing a regular entry"
+
+	# Add a host entry and expect the packet to be locally received.
+	bridge mdb add dev br0 port br0 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 2
+	check_err $? "Packet not locally received after adding a host entry"
+
+	# Remove the host entry and expect the packet to not be locally
+	# received.
+	bridge mdb del dev br0 port br0 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev br0 ingress" 1 2
+	check_err $? "Packet locally received after removing a host entry"
+
+	bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10
+
+	tc filter del dev br0 ingress protocol all pref 1 handle 1 flower
+
+	log_test "L2 host entries forwarding tests"
+}
+
+fwd_test_host()
+{
+	# Disable multicast router on the bridge to ensure that packets are
+	# only locally received when a matching host entry is present.
+	ip link set dev br0 type bridge mcast_router 0
+
+	fwd_test_host_ip
+	fwd_test_host_l2
+
+	ip link set dev br0 type bridge mcast_router 1
+}
+
+__fwd_test_port_ip()
+{
+	local grp=$1; shift
+	local dmac=$1; shift
+	local valid_src=$1; shift
+	local invalid_src=$1; shift
+	local mode=$1; shift
+	local filter_mode=$1; shift
+	local name
+	local eth_type
+	local src_list
+
+	RET=0
+
+	if [[ $mode == "-4" ]]; then
+		name="IPv4"
+		eth_type="ipv4"
+	else
+		name="IPv6"
+		eth_type="ipv6"
+	fi
+
+	# The valid source is the one we expect to get packets from after
+	# adding the entry.
+	if [[ $filter_mode == "include" ]]; then
+		src_list=$valid_src
+	else
+		src_list=$invalid_src
+	fi
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 1 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \
+		src_ip $valid_src action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 2 flower \
+		vlan_ethtype $eth_type vlan_id 10 dst_ip $grp \
+		src_ip $invalid_src action drop
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Packet from valid source received on H2 before adding entry"
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 0
+	check_err $? "Packet from invalid source received on H2 before adding entry"
+
+	bridge mdb add dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode $filter_mode source_list $src_list
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet from valid source not received on H2 after adding entry"
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 0
+	check_err $? "Packet from invalid source received on H2 after adding entry"
+
+	bridge mdb replace dev br0 port $swp2 grp $grp vid 10 \
+		filter_mode exclude
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 2
+	check_err $? "Packet from valid source not received on H2 after allowing all sources"
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 1
+	check_err $? "Packet from invalid source not received on H2 after allowing all sources"
+
+	bridge mdb del dev br0 port $swp2 grp $grp vid 10
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $valid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 1 2
+	check_err $? "Packet from valid source received on H2 after deleting entry"
+
+	$MZ $mode $h1.10 -a own -b $dmac -c 1 -p 128 -A $invalid_src -B $grp -t udp -q
+	tc_check_packets "dev $h2 ingress" 2 1
+	check_err $? "Packet from invalid source received on H2 after deleting entry"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 2 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 1 flower
+
+	log_test "$name port group \"$filter_mode\" entries forwarding tests"
+}
+
+fwd_test_port_ip()
+{
+	__fwd_test_port_ip "239.1.1.1" "01:00:5e:01:01:01" "192.0.2.1" "192.0.2.2" "-4" "exclude"
+	__fwd_test_port_ip "ff0e::1" "33:33:00:00:00:01" "2001:db8:1::1" "2001:db8:1::2" "-6" \
+		"exclude"
+	__fwd_test_port_ip "239.1.1.1" "01:00:5e:01:01:01" "192.0.2.1" "192.0.2.2" "-4" "include"
+	__fwd_test_port_ip "ff0e::1" "33:33:00:00:00:01" "2001:db8:1::1" "2001:db8:1::2" "-6" \
+		"include"
+}
+
+fwd_test_port_l2()
+{
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol all pref 1 handle 1 flower \
+		dst_mac $dmac action drop
+
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Packet received on H2 before adding entry"
+
+	bridge mdb add dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet not received on H2 after adding entry"
+
+	bridge mdb del dev br0 port $swp2 grp $dmac permanent vid 10
+	$MZ $h1.10 -c 1 -p 128 -a own -b $dmac -q
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Packet received on H2 after deleting entry"
+
+	tc filter del dev $h2 ingress protocol all pref 1 handle 1 flower
+
+	log_test "L2 port entries forwarding tests"
+}
+
+fwd_test_port()
+{
+	# Disable multicast flooding to ensure that packets are only forwarded
+	# out of a port when a matching port group entry is present.
+	bridge link set dev $swp2 mcast_flood off
+
+	fwd_test_port_ip
+	fwd_test_port_l2
+
+	bridge link set dev $swp2 mcast_flood on
+}
+
+fwd_test()
+{
+	echo
+	log_info "# Forwarding tests"
+
+	# Forwarding according to MDB entries only takes place when the bridge
+	# detects that there is a valid querier in the network. Set the bridge
+	# as the querier and assign it a valid IPv6 link-local address to be
+	# used as the source address for MLD queries.
+	ip -6 address add fe80::1/64 nodad dev br0
+	ip link set dev br0 type bridge mcast_querier 1
+	# Wait the default Query Response Interval (10 seconds) for the bridge
+	# to determine that there are no other queriers in the network.
+	sleep 10
+
+	fwd_test_host
+	fwd_test_port
+
+	ip link set dev br0 type bridge mcast_querier 0
+	ip -6 address del fe80::1/64 dev br0
+}
+
+ctrl_igmpv3_is_in_test()
+{
+	RET=0
+
+	# Add a permanent entry and check that it is not affected by the
+	# received IGMP packet.
+	bridge mdb add dev br0 port $swp1 grp 239.1.1.1 permanent vid 10 \
+		filter_mode include source_list 192.0.2.1
+
+	# IS_IN ( 192.0.2.2 )
+	$MZ $h1.10 -c 1 -a own -b 01:00:5e:01:01:01 -A 192.0.2.1 -B 239.1.1.1 \
+		-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -q 192.0.2.2
+	check_fail $? "Permanent entry affected by IGMP packet"
+
+	# Replace the permanent entry with a temporary one and check that after
+	# processing the IGMP packet, a new source is added to the list along
+	# with a new forwarding entry.
+	bridge mdb replace dev br0 port $swp1 grp 239.1.1.1 temp vid 10 \
+		filter_mode include source_list 192.0.2.1
+
+	# IS_IN ( 192.0.2.2 )
+	$MZ $h1.10 -a own -b 01:00:5e:01:01:01 -c 1 -A 192.0.2.1 -B 239.1.1.1 \
+		-t ip proto=2,p=$(igmpv3_is_in_get 239.1.1.1 192.0.2.2) -q
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | grep -v "src" | \
+		grep -q 192.0.2.2
+	check_err $? "Source not add to source list"
+
+	bridge -d mdb show dev br0 vid 10 | grep 239.1.1.1 | \
+		grep -q "src 192.0.2.2"
+	check_err $? "(S, G) entry not created for new source"
+
+	bridge mdb del dev br0 port $swp1 grp 239.1.1.1 vid 10
+
+	log_test "IGMPv3 MODE_IS_INCLUDE tests"
+}
+
+ctrl_mldv2_is_in_test()
+{
+	RET=0
+
+	# Add a permanent entry and check that it is not affected by the
+	# received MLD packet.
+	bridge mdb add dev br0 port $swp1 grp ff0e::1 permanent vid 10 \
+		filter_mode include source_list 2001:db8:1::1
+
+	# IS_IN ( 2001:db8:1::2 )
+	local p=$(mldv2_is_in_get fe80::1 ff0e::1 2001:db8:1::2)
+	$MZ -6 $h1.10 -a own -b 33:33:00:00:00:01 -c 1 -A fe80::1 -B ff0e::1 \
+		-t ip hop=1,next=0,p="$p" -q
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
+		grep -q 2001:db8:1::2
+	check_fail $? "Permanent entry affected by MLD packet"
+
+	# Replace the permanent entry with a temporary one and check that after
+	# processing the MLD packet, a new source is added to the list along
+	# with a new forwarding entry.
+	bridge mdb replace dev br0 port $swp1 grp ff0e::1 temp vid 10 \
+		filter_mode include source_list 2001:db8:1::1
+
+	# IS_IN ( 2001:db8:1::2 )
+	$MZ -6 $h1.10 -a own -b 33:33:00:00:00:01 -c 1 -A fe80::1 -B ff0e::1 \
+		-t ip hop=1,next=0,p="$p" -q
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | grep -v "src" | \
+		grep -q 2001:db8:1::2
+	check_err $? "Source not add to source list"
+
+	bridge -d mdb show dev br0 vid 10 | grep ff0e::1 | \
+		grep -q "src 2001:db8:1::2"
+	check_err $? "(S, G) entry not created for new source"
+
+	bridge mdb del dev br0 port $swp1 grp ff0e::1 vid 10
+
+	log_test "MLDv2 MODE_IS_INCLUDE tests"
+}
+
+ctrl_test()
+{
+	echo
+	log_info "# Control packets tests"
+
+	ctrl_igmpv3_is_in_test
+	ctrl_mldv2_is_in_test
+}
+
+if ! bridge mdb help 2>&1 | grep -q "replace"; then
+	echo "SKIP: iproute2 too old, missing bridge mdb replace support"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb_host.sh b/tools/testing/selftests/net/forwarding/bridge_mdb_host.sh
new file mode 100755
index 0000000000..b1ba6876dd
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb_host.sh
@@ -0,0 +1,103 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Verify that adding host mdb entries work as intended for all types of
+# multicast filters: ipv4, ipv6, and mac
+
+ALL_TESTS="mdb_add_del_test"
+NUM_NETIFS=2
+
+TEST_GROUP_IP4="225.1.2.3"
+TEST_GROUP_IP6="ff02::42"
+TEST_GROUP_MAC="01:00:01:c0:ff:ee"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+switch_create()
+{
+	# Enable multicast filtering
+	ip link add dev br0 type bridge mcast_snooping 1
+
+	ip link set dev $swp1 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp1 down
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	vrf_prepare
+
+	h1_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+do_mdb_add_del()
+{
+	local group=$1
+	local flag=$2
+
+	RET=0
+	bridge mdb add dev br0 port br0 grp $group $flag 2>/dev/null
+	check_err $? "Failed adding $group to br0, port br0"
+
+	if [ -z "$flag" ]; then
+	    flag="temp"
+	fi
+
+	bridge mdb show dev br0 | grep $group | grep -q $flag 2>/dev/null
+	check_err $? "$group not added with $flag flag"
+
+	bridge mdb del dev br0 port br0 grp $group 2>/dev/null
+	check_err $? "Failed deleting $group from br0, port br0"
+
+	bridge mdb show dev br0 | grep -q $group >/dev/null
+	check_err_fail 1 $? "$group still in mdb after delete"
+
+	log_test "MDB add/del group $group to bridge port br0"
+}
+
+mdb_add_del_test()
+{
+	do_mdb_add_del $TEST_GROUP_MAC permanent
+	do_mdb_add_del $TEST_GROUP_IP4
+	do_mdb_add_del $TEST_GROUP_IP6
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh b/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh
new file mode 100755
index 0000000000..3da9d93ab3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb_max.sh
@@ -0,0 +1,1347 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# | + $h1.10              |                          | + $h2.10               |
+# | | 192.0.2.1/28        |                          | | 192.0.2.2/28         |
+# | | 2001:db8:1::1/64    |                          | | 2001:db8:1::2/64     |
+# | |                     |                          | |                      |
+# | |  + $h1.20           |                          | |  + $h2.20            |
+# | \  | 198.51.100.1/24  |                          | \  | 198.51.100.2/24   |
+# |  \ | 2001:db8:2::1/64 |                          |  \ | 2001:db8:2::2/64  |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR0 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | +-----------------------------------------------------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_8021d
+	test_8021q
+	test_8021qvs
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	simple_if_fini $h2
+}
+
+switch_create_8021d()
+{
+	log_info "802.1d tests"
+
+	ip link add name br0 type bridge vlan_filtering 0 \
+		mcast_snooping 1 \
+		mcast_igmp_version 3 mcast_mld_version 2
+	ip link set dev br0 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp1 up
+	bridge link set dev $swp1 fastleave on
+
+	ip link set dev $swp2 master br0
+	ip link set dev $swp2 up
+}
+
+switch_create_8021q()
+{
+	local br_flags=$1; shift
+
+	log_info "802.1q $br_flags${br_flags:+ }tests"
+
+	ip link add name br0 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 1 $br_flags \
+		mcast_igmp_version 3 mcast_mld_version 2
+	bridge vlan add vid 10 dev br0 self
+	bridge vlan add vid 20 dev br0 self
+	ip link set dev br0 up
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp1 up
+	bridge link set dev $swp1 fastleave on
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br0
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+}
+
+switch_create_8021qvs()
+{
+	switch_create_8021q "mcast_vlan_snooping 1"
+	bridge vlan global set dev br0 vid 10 mcast_igmp_version 3
+	bridge vlan global set dev br0 vid 10 mcast_mld_version 2
+	bridge vlan global set dev br0 vid 20 mcast_igmp_version 3
+	bridge vlan global set dev br0 vid 20 mcast_mld_version 2
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev br0 down
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy 2>/dev/null
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+cfg_src_list()
+{
+	local IPs=("$@")
+	local IPstr=$(echo ${IPs[@]} | tr '[:space:]' , | sed 's/,$//')
+
+	echo ${IPstr:+source_list }${IPstr}
+}
+
+cfg_group_op()
+{
+	local op=$1; shift
+	local locus=$1; shift
+	local GRP=$1; shift
+	local state=$1; shift
+	local IPs=("$@")
+
+	local source_list=$(cfg_src_list ${IPs[@]})
+
+	# Everything besides `bridge mdb' uses the "dev X vid Y" syntax,
+	# so we use it here as well and convert.
+	local br_locus=$(echo "$locus" | sed 's/^dev /port /')
+
+	bridge mdb $op dev br0 $br_locus grp $GRP $state \
+	       filter_mode include $source_list
+}
+
+cfg4_entries_op()
+{
+	local op=$1; shift
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local GRP=239.1.1.${grp}
+	local IPs=$(seq -f 192.0.2.%g 1 $((n - 1)))
+	cfg_group_op "$op" "$locus" "$GRP" "$state" ${IPs[@]}
+}
+
+cfg4_entries_add()
+{
+	cfg4_entries_op add "$@"
+}
+
+cfg4_entries_del()
+{
+	cfg4_entries_op del "$@"
+}
+
+cfg6_entries_op()
+{
+	local op=$1; shift
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local GRP=ff0e::${grp}
+	local IPs=$(printf "2001:db8:1::%x\n" $(seq 1 $((n - 1))))
+	cfg_group_op "$op" "$locus" "$GRP" "$state" ${IPs[@]}
+}
+
+cfg6_entries_add()
+{
+	cfg6_entries_op add "$@"
+}
+
+cfg6_entries_del()
+{
+	cfg6_entries_op del "$@"
+}
+
+locus_dev_peer()
+{
+	local dev_kw=$1; shift
+	local dev=$1; shift
+	local vid_kw=$1; shift
+	local vid=$1; shift
+
+	echo "$h1.${vid:-10}"
+}
+
+locus_dev()
+{
+	local dev_kw=$1; shift
+	local dev=$1; shift
+
+	echo $dev
+}
+
+ctl4_entries_add()
+{
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local IPs=$(seq -f 192.0.2.%g 1 $((n - 1)))
+	local peer=$(locus_dev_peer $locus)
+	local GRP=239.1.1.${grp}
+	local dmac=01:00:5e:01:01:$(printf "%02x" $grp)
+	$MZ $peer -a own -b $dmac -c 1 -A 192.0.2.1 -B $GRP \
+		-t ip proto=2,p=$(igmpv3_is_in_get $GRP $IPs) -q
+	sleep 1
+
+	local nn=$(bridge mdb show dev br0 | grep $GRP | wc -l)
+	if ((nn != n)); then
+		echo mcast_max_groups > /dev/stderr
+		false
+	fi
+}
+
+ctl4_entries_del()
+{
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local peer=$(locus_dev_peer $locus)
+	local GRP=239.1.1.${grp}
+	local dmac=01:00:5e:00:00:02
+	$MZ $peer -a own -b $dmac -c 1 -A 192.0.2.1 -B 224.0.0.2 \
+		-t ip proto=2,p=$(igmpv2_leave_get $GRP) -q
+	sleep 1
+	! bridge mdb show dev br0 | grep -q $GRP
+}
+
+ctl6_entries_add()
+{
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local IPs=$(printf "2001:db8:1::%x\n" $(seq 1 $((n - 1))))
+	local peer=$(locus_dev_peer $locus)
+	local SIP=fe80::1
+	local GRP=ff0e::${grp}
+	local dmac=33:33:00:00:00:$(printf "%02x" $grp)
+	local p=$(mldv2_is_in_get $SIP $GRP $IPs)
+	$MZ -6 $peer -a own -b $dmac -c 1 -A $SIP -B $GRP \
+		-t ip hop=1,next=0,p="$p" -q
+	sleep 1
+
+	local nn=$(bridge mdb show dev br0 | grep $GRP | wc -l)
+	if ((nn != n)); then
+		echo mcast_max_groups > /dev/stderr
+		false
+	fi
+}
+
+ctl6_entries_del()
+{
+	local locus=$1; shift
+	local state=$1; shift
+	local n=$1; shift
+	local grp=${1:-1}; shift
+
+	local peer=$(locus_dev_peer $locus)
+	local SIP=fe80::1
+	local GRP=ff0e::${grp}
+	local dmac=33:33:00:00:00:$(printf "%02x" $grp)
+	local p=$(mldv1_done_get $SIP $GRP)
+	$MZ -6 $peer -a own -b $dmac -c 1 -A $SIP -B $GRP \
+		-t ip hop=1,next=0,p="$p" -q
+	sleep 1
+	! bridge mdb show dev br0 | grep -q $GRP
+}
+
+bridge_maxgroups_errmsg_check_cfg()
+{
+	local msg=$1; shift
+	local needle=$1; shift
+
+	echo "$msg" | grep -q mcast_max_groups
+	check_err $? "Adding MDB entries failed for the wrong reason: $msg"
+}
+
+bridge_maxgroups_errmsg_check_cfg4()
+{
+	bridge_maxgroups_errmsg_check_cfg "$@"
+}
+
+bridge_maxgroups_errmsg_check_cfg6()
+{
+	bridge_maxgroups_errmsg_check_cfg "$@"
+}
+
+bridge_maxgroups_errmsg_check_ctl4()
+{
+	:
+}
+
+bridge_maxgroups_errmsg_check_ctl6()
+{
+	:
+}
+
+bridge_port_ngroups_get()
+{
+	local locus=$1; shift
+
+	bridge -j -d link show $locus |
+	    jq '.[].mcast_n_groups'
+}
+
+bridge_port_maxgroups_get()
+{
+	local locus=$1; shift
+
+	bridge -j -d link show $locus |
+	    jq '.[].mcast_max_groups'
+}
+
+bridge_port_maxgroups_set()
+{
+	local locus=$1; shift
+	local max=$1; shift
+
+	bridge link set dev $(locus_dev $locus) mcast_max_groups $max
+}
+
+bridge_port_vlan_ngroups_get()
+{
+	local locus=$1; shift
+
+	bridge -j -d vlan show $locus |
+	    jq '.[].vlans[].mcast_n_groups'
+}
+
+bridge_port_vlan_maxgroups_get()
+{
+	local locus=$1; shift
+
+	bridge -j -d vlan show $locus |
+	    jq '.[].vlans[].mcast_max_groups'
+}
+
+bridge_port_vlan_maxgroups_set()
+{
+	local locus=$1; shift
+	local max=$1; shift
+
+	bridge vlan set $locus mcast_max_groups $max
+}
+
+test_ngroups_reporting()
+{
+	local CFG=$1; shift
+	local context=$1; shift
+	local locus=$1; shift
+
+	RET=0
+
+	local n0=$(bridge_${context}_ngroups_get "$locus")
+	${CFG}_entries_add "$locus" temp 5
+	check_err $? "Couldn't add MDB entries"
+	local n1=$(bridge_${context}_ngroups_get "$locus")
+
+	((n1 == n0 + 5))
+	check_err $? "Number of groups was $n0, now is $n1, but $((n0 + 5)) expected"
+
+	${CFG}_entries_del "$locus" temp 5
+	check_err $? "Couldn't delete MDB entries"
+	local n2=$(bridge_${context}_ngroups_get "$locus")
+
+	((n2 == n0))
+	check_err $? "Number of groups was $n0, now is $n2, but should be back to $n0"
+
+	log_test "$CFG: $context: ngroups reporting"
+}
+
+test_8021d_ngroups_reporting_cfg4()
+{
+	test_ngroups_reporting cfg4 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_ctl4()
+{
+	test_ngroups_reporting ctl4 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_cfg6()
+{
+	test_ngroups_reporting cfg6 port "dev $swp1"
+}
+
+test_8021d_ngroups_reporting_ctl6()
+{
+	test_ngroups_reporting ctl6 port "dev $swp1"
+}
+
+test_8021q_ngroups_reporting_cfg4()
+{
+	test_ngroups_reporting cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_ctl4()
+{
+	test_ngroups_reporting ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_cfg6()
+{
+	test_ngroups_reporting cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_ngroups_reporting_ctl6()
+{
+	test_ngroups_reporting ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_cfg4()
+{
+	test_ngroups_reporting cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_ctl4()
+{
+	test_ngroups_reporting ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_cfg6()
+{
+	test_ngroups_reporting cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_ngroups_reporting_ctl6()
+{
+	test_ngroups_reporting ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_ngroups_cross_vlan()
+{
+	local CFG=$1; shift
+
+	local locus1="dev $swp1 vid 10"
+	local locus2="dev $swp1 vid 20"
+
+	RET=0
+
+	local n10=$(bridge_port_vlan_ngroups_get "$locus1")
+	local n20=$(bridge_port_vlan_ngroups_get "$locus2")
+	${CFG}_entries_add "$locus1" temp 5 111
+	check_err $? "Couldn't add MDB entries to VLAN 10"
+	local n11=$(bridge_port_vlan_ngroups_get "$locus1")
+	local n21=$(bridge_port_vlan_ngroups_get "$locus2")
+
+	((n11 == n10 + 5))
+	check_err $? "Number of groups at VLAN 10 was $n10, now is $n11, but 5 entries added on VLAN 10, $((n10 + 5)) expected"
+
+	((n21 == n20))
+	check_err $? "Number of groups at VLAN 20 was $n20, now is $n21, but no change expected on VLAN 20"
+
+	${CFG}_entries_add "$locus2" temp 5 112
+	check_err $? "Couldn't add MDB entries to VLAN 20"
+	local n12=$(bridge_port_vlan_ngroups_get "$locus1")
+	local n22=$(bridge_port_vlan_ngroups_get "$locus2")
+
+	((n12 == n11))
+	check_err $? "Number of groups at VLAN 10 was $n11, now is $n12, but no change expected on VLAN 10"
+
+	((n22 == n21 + 5))
+	check_err $? "Number of groups at VLAN 20 was $n21, now is $n22, but 5 entries added on VLAN 20, $((n21 + 5)) expected"
+
+	${CFG}_entries_del "$locus1" temp 5 111
+	check_err $? "Couldn't delete MDB entries from VLAN 10"
+	${CFG}_entries_del "$locus2" temp 5 112
+	check_err $? "Couldn't delete MDB entries from VLAN 20"
+	local n13=$(bridge_port_vlan_ngroups_get "$locus1")
+	local n23=$(bridge_port_vlan_ngroups_get "$locus2")
+
+	((n13 == n10))
+	check_err $? "Number of groups at VLAN 10 was $n10, now is $n13, but should be back to $n10"
+
+	((n23 == n20))
+	check_err $? "Number of groups at VLAN 20 was $n20, now is $n23, but should be back to $n20"
+
+	log_test "$CFG: port_vlan: isolation of port and per-VLAN ngroups"
+}
+
+test_8021qvs_ngroups_cross_vlan_cfg4()
+{
+	test_ngroups_cross_vlan cfg4
+}
+
+test_8021qvs_ngroups_cross_vlan_ctl4()
+{
+	test_ngroups_cross_vlan ctl4
+}
+
+test_8021qvs_ngroups_cross_vlan_cfg6()
+{
+	test_ngroups_cross_vlan cfg6
+}
+
+test_8021qvs_ngroups_cross_vlan_ctl6()
+{
+	test_ngroups_cross_vlan ctl6
+}
+
+test_maxgroups_zero()
+{
+	local CFG=$1; shift
+	local context=$1; shift
+	local locus=$1; shift
+
+	RET=0
+	local max
+
+	max=$(bridge_${context}_maxgroups_get "$locus")
+	((max == 0))
+	check_err $? "Max groups on $locus should be 0, but $max reported"
+
+	bridge_${context}_maxgroups_set "$locus" 100
+	check_err $? "Failed to set max to 100"
+	max=$(bridge_${context}_maxgroups_get "$locus")
+	((max == 100))
+	check_err $? "Max groups expected to be 100, but $max reported"
+
+	bridge_${context}_maxgroups_set "$locus" 0
+	check_err $? "Couldn't set maximum to 0"
+
+	# Test that setting 0 explicitly still serves as infinity.
+	${CFG}_entries_add "$locus" temp 5
+	check_err $? "Adding 5 MDB entries failed but should have passed"
+	${CFG}_entries_del "$locus" temp 5
+	check_err $? "Couldn't delete MDB entries"
+
+	log_test "$CFG: $context maxgroups: reporting and treatment of 0"
+}
+
+test_8021d_maxgroups_zero_cfg4()
+{
+	test_maxgroups_zero cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_ctl4()
+{
+	test_maxgroups_zero ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_cfg6()
+{
+	test_maxgroups_zero cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_zero_ctl6()
+{
+	test_maxgroups_zero ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_zero_cfg4()
+{
+	test_maxgroups_zero cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_ctl4()
+{
+	test_maxgroups_zero ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_cfg6()
+{
+	test_maxgroups_zero cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_zero_ctl6()
+{
+	test_maxgroups_zero ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_cfg4()
+{
+	test_maxgroups_zero cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_ctl4()
+{
+	test_maxgroups_zero ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_cfg6()
+{
+	test_maxgroups_zero cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_zero_ctl6()
+{
+	test_maxgroups_zero ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_zero_cross_vlan()
+{
+	local CFG=$1; shift
+
+	local locus0="dev $swp1"
+	local locus1="dev $swp1 vid 10"
+	local locus2="dev $swp1 vid 20"
+	local max
+
+	RET=0
+
+	bridge_port_vlan_maxgroups_set "$locus1" 100
+	check_err $? "$locus1: Failed to set max to 100"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 0))
+	check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 0))
+	check_err $? "$locus2: Max groups expected to be 0, but $max reported"
+
+	bridge_port_vlan_maxgroups_set "$locus2" 100
+	check_err $? "$locus2: Failed to set max to 100"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 0))
+	check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 100))
+	check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+	bridge_port_maxgroups_set "$locus0" 100
+	check_err $? "$locus0: Failed to set max to 100"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 100))
+	check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 100))
+	check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+	bridge_port_vlan_maxgroups_set "$locus1" 0
+	check_err $? "$locus1: Failed to set max to 0"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 100))
+	check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 100))
+	check_err $? "$locus2: Max groups expected to be 100, but $max reported"
+
+	bridge_port_vlan_maxgroups_set "$locus2" 0
+	check_err $? "$locus2: Failed to set max to 0"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 100))
+	check_err $? "$locus0: Max groups expected to be 100, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 0))
+	check_err $? "$locus2: Max groups expected to be 0 but $max reported"
+
+	bridge_port_maxgroups_set "$locus0" 0
+	check_err $? "$locus0: Failed to set max to 0"
+
+	max=$(bridge_port_maxgroups_get "$locus0")
+	((max == 0))
+	check_err $? "$locus0: Max groups expected to be 0, but $max reported"
+
+	max=$(bridge_port_vlan_maxgroups_get "$locus2")
+	((max == 0))
+	check_err $? "$locus2: Max groups expected to be 0, but $max reported"
+
+	log_test "$CFG: port_vlan maxgroups: isolation of port and per-VLAN maximums"
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_cfg4()
+{
+	test_maxgroups_zero_cross_vlan cfg4
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_ctl4()
+{
+	test_maxgroups_zero_cross_vlan ctl4
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_cfg6()
+{
+	test_maxgroups_zero_cross_vlan cfg6
+}
+
+test_8021qvs_maxgroups_zero_cross_vlan_ctl6()
+{
+	test_maxgroups_zero_cross_vlan ctl6
+}
+
+test_maxgroups_too_low()
+{
+	local CFG=$1; shift
+	local context=$1; shift
+	local locus=$1; shift
+
+	RET=0
+
+	local n=$(bridge_${context}_ngroups_get "$locus")
+	local msg
+
+	${CFG}_entries_add "$locus" temp 5 111
+	check_err $? "$locus: Couldn't add MDB entries"
+
+	bridge_${context}_maxgroups_set "$locus" $((n+2))
+	check_err $? "$locus: Setting maxgroups to $((n+2)) failed"
+
+	msg=$(${CFG}_entries_add "$locus" temp 2 112 2>&1)
+	check_fail $? "$locus: Adding more entries passed when max<n"
+	bridge_maxgroups_errmsg_check_cfg "$msg"
+
+	${CFG}_entries_del "$locus" temp 5 111
+	check_err $? "$locus: Couldn't delete MDB entries"
+
+	${CFG}_entries_add "$locus" temp 2 112
+	check_err $? "$locus: Adding more entries failed"
+
+	${CFG}_entries_del "$locus" temp 2 112
+	check_err $? "$locus: Deleting more entries failed"
+
+	bridge_${context}_maxgroups_set "$locus" 0
+	check_err $? "$locus: Couldn't set maximum to 0"
+
+	log_test "$CFG: $context maxgroups: configure below ngroups"
+}
+
+test_8021d_maxgroups_too_low_cfg4()
+{
+	test_maxgroups_too_low cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_ctl4()
+{
+	test_maxgroups_too_low ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_cfg6()
+{
+	test_maxgroups_too_low cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_low_ctl6()
+{
+	test_maxgroups_too_low ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_too_low_cfg4()
+{
+	test_maxgroups_too_low cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_ctl4()
+{
+	test_maxgroups_too_low ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_cfg6()
+{
+	test_maxgroups_too_low cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_low_ctl6()
+{
+	test_maxgroups_too_low ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_cfg4()
+{
+	test_maxgroups_too_low cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_ctl4()
+{
+	test_maxgroups_too_low ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_cfg6()
+{
+	test_maxgroups_too_low cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_low_ctl6()
+{
+	test_maxgroups_too_low ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_too_many_entries()
+{
+	local CFG=$1; shift
+	local context=$1; shift
+	local locus=$1; shift
+
+	RET=0
+
+	local n=$(bridge_${context}_ngroups_get "$locus")
+	local msg
+
+	# Configure a low maximum
+	bridge_${context}_maxgroups_set "$locus" $((n+1))
+	check_err $? "$locus: Couldn't set maximum"
+
+	# Try to add more entries than the configured maximum
+	msg=$(${CFG}_entries_add "$locus" temp 5 2>&1)
+	check_fail $? "Adding 5 MDB entries passed, but should have failed"
+	bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+	# When adding entries through the control path, as many as possible
+	# get created. That's consistent with the mcast_hash_max behavior.
+	# So there, drop the entries explicitly.
+	if [[ ${CFG%[46]} == ctl ]]; then
+		${CFG}_entries_del "$locus" temp 17 2>&1
+	fi
+
+	local n2=$(bridge_${context}_ngroups_get "$locus")
+	((n2 == n))
+	check_err $? "Number of groups was $n, but after a failed attempt to add MDB entries it changed to $n2"
+
+	bridge_${context}_maxgroups_set "$locus" 0
+	check_err $? "$locus: Couldn't set maximum to 0"
+
+	log_test "$CFG: $context maxgroups: add too many MDB entries"
+}
+
+test_8021d_maxgroups_too_many_entries_cfg4()
+{
+	test_maxgroups_too_many_entries cfg4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_ctl4()
+{
+	test_maxgroups_too_many_entries ctl4 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_cfg6()
+{
+	test_maxgroups_too_many_entries cfg6 port "dev $swp1"
+}
+
+test_8021d_maxgroups_too_many_entries_ctl6()
+{
+	test_maxgroups_too_many_entries ctl6 port "dev $swp1"
+}
+
+test_8021q_maxgroups_too_many_entries_cfg4()
+{
+	test_maxgroups_too_many_entries cfg4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_ctl4()
+{
+	test_maxgroups_too_many_entries ctl4 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_cfg6()
+{
+	test_maxgroups_too_many_entries cfg6 port "dev $swp1 vid 10"
+}
+
+test_8021q_maxgroups_too_many_entries_ctl6()
+{
+	test_maxgroups_too_many_entries ctl6 port "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_cfg4()
+{
+	test_maxgroups_too_many_entries cfg4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_ctl4()
+{
+	test_maxgroups_too_many_entries ctl4 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_cfg6()
+{
+	test_maxgroups_too_many_entries cfg6 port_vlan "dev $swp1 vid 10"
+}
+
+test_8021qvs_maxgroups_too_many_entries_ctl6()
+{
+	test_maxgroups_too_many_entries ctl6 port_vlan "dev $swp1 vid 10"
+}
+
+test_maxgroups_too_many_cross_vlan()
+{
+	local CFG=$1; shift
+
+	RET=0
+
+	local locus0="dev $swp1"
+	local locus1="dev $swp1 vid 10"
+	local locus2="dev $swp1 vid 20"
+	local n1=$(bridge_port_vlan_ngroups_get "$locus1")
+	local n2=$(bridge_port_vlan_ngroups_get "$locus2")
+	local msg
+
+	if ((n1 > n2)); then
+		local tmp=$n1
+		n1=$n2
+		n2=$tmp
+
+		tmp="$locus1"
+		locus1="$locus2"
+		locus2="$tmp"
+	fi
+
+	# Now 0 <= n1 <= n2.
+	${CFG}_entries_add "$locus2" temp 5 112
+	check_err $? "Couldn't add 5 entries"
+
+	n2=$(bridge_port_vlan_ngroups_get "$locus2")
+	# Now 0 <= n1 < n2-1.
+
+	# Setting locus1'maxgroups to n2-1 should pass. The number is
+	# smaller than both the absolute number of MDB entries, and in
+	# particular than number of locus2's number of entries, but it is
+	# large enough to cover locus1's entries. Thus we check that
+	# individual VLAN's ngroups are independent.
+	bridge_port_vlan_maxgroups_set "$locus1" $((n2-1))
+	check_err $? "Setting ${locus1}'s maxgroups to $((n2-1)) failed"
+
+	msg=$(${CFG}_entries_add "$locus1" temp $n2 111 2>&1)
+	check_fail $? "$locus1: Adding $n2 MDB entries passed, but should have failed"
+	bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+	bridge_port_maxgroups_set "$locus0" $((n1 + n2 + 2))
+	check_err $? "$locus0: Couldn't set maximum"
+
+	msg=$(${CFG}_entries_add "$locus1" temp 5 111 2>&1)
+	check_fail $? "$locus1: Adding 5 MDB entries passed, but should have failed"
+	bridge_maxgroups_errmsg_check_${CFG} "$msg"
+
+	# IGMP/MLD packets can cause several entries to be added, before
+	# the maximum is hit and the rest is then bounced. Remove what was
+	# committed, if anything.
+	${CFG}_entries_del "$locus1" temp 5 111 2>/dev/null
+
+	${CFG}_entries_add "$locus1" temp 2 111
+	check_err $? "$locus1: Adding 2 MDB entries failed, but should have passed"
+
+	${CFG}_entries_del "$locus1" temp 2 111
+	check_err $? "Couldn't delete MDB entries"
+
+	${CFG}_entries_del "$locus2" temp 5 112
+	check_err $? "Couldn't delete MDB entries"
+
+	bridge_port_vlan_maxgroups_set "$locus1" 0
+	check_err $? "$locus1: Couldn't set maximum to 0"
+
+	bridge_port_maxgroups_set "$locus0" 0
+	check_err $? "$locus0: Couldn't set maximum to 0"
+
+	log_test "$CFG: port_vlan maxgroups: isolation of port and per-VLAN ngroups"
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_cfg4()
+{
+	test_maxgroups_too_many_cross_vlan cfg4
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_ctl4()
+{
+	test_maxgroups_too_many_cross_vlan ctl4
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_cfg6()
+{
+	test_maxgroups_too_many_cross_vlan cfg6
+}
+
+test_8021qvs_maxgroups_too_many_cross_vlan_ctl6()
+{
+	test_maxgroups_too_many_cross_vlan ctl6
+}
+
+test_vlan_attributes()
+{
+	local locus=$1; shift
+	local expect=$1; shift
+
+	RET=0
+
+	local max=$(bridge_port_vlan_maxgroups_get "$locus")
+	local n=$(bridge_port_vlan_ngroups_get "$locus")
+
+	eval "[[ $max $expect ]]"
+	check_err $? "$locus: maxgroups attribute expected to be $expect, but was $max"
+
+	eval "[[ $n $expect ]]"
+	check_err $? "$locus: ngroups attribute expected to be $expect, but was $n"
+
+	log_test "port_vlan: presence of ngroups and maxgroups attributes"
+}
+
+test_8021q_vlan_attributes()
+{
+	test_vlan_attributes "dev $swp1 vid 10" "== null"
+}
+
+test_8021qvs_vlan_attributes()
+{
+	test_vlan_attributes "dev $swp1 vid 10" "-ge 0"
+}
+
+test_toggle_vlan_snooping()
+{
+	local mode=$1; shift
+
+	RET=0
+
+	local CFG=cfg4
+	local context=port_vlan
+	local locus="dev $swp1 vid 10"
+
+	${CFG}_entries_add "$locus" $mode 5
+	check_err $? "Couldn't add MDB entries"
+
+	bridge_${context}_maxgroups_set "$locus" 100
+	check_err $? "Failed to set max to 100"
+
+	ip link set dev br0 type bridge mcast_vlan_snooping 0
+	sleep 1
+	ip link set dev br0 type bridge mcast_vlan_snooping 1
+
+	local n=$(bridge_${context}_ngroups_get "$locus")
+	local nn=$(bridge mdb show dev br0 | grep $swp1 | wc -l)
+	((nn == n))
+	check_err $? "mcast_n_groups expected to be $nn, but $n reported"
+
+	local max=$(bridge_${context}_maxgroups_get "$locus")
+	((max == 100))
+	check_err $? "Max groups expected to be 100 but $max reported"
+
+	bridge_${context}_maxgroups_set "$locus" 0
+	check_err $? "Failed to set max to 0"
+
+	log_test "$CFG: $context: $mode: mcast_vlan_snooping toggle"
+}
+
+test_toggle_vlan_snooping_temp()
+{
+	test_toggle_vlan_snooping temp
+}
+
+test_toggle_vlan_snooping_permanent()
+{
+	test_toggle_vlan_snooping permanent
+}
+
+# ngroup test suites
+
+test_8021d_ngroups_cfg4()
+{
+	test_8021d_ngroups_reporting_cfg4
+}
+
+test_8021d_ngroups_ctl4()
+{
+	test_8021d_ngroups_reporting_ctl4
+}
+
+test_8021d_ngroups_cfg6()
+{
+	test_8021d_ngroups_reporting_cfg6
+}
+
+test_8021d_ngroups_ctl6()
+{
+	test_8021d_ngroups_reporting_ctl6
+}
+
+test_8021q_ngroups_cfg4()
+{
+	test_8021q_ngroups_reporting_cfg4
+}
+
+test_8021q_ngroups_ctl4()
+{
+	test_8021q_ngroups_reporting_ctl4
+}
+
+test_8021q_ngroups_cfg6()
+{
+	test_8021q_ngroups_reporting_cfg6
+}
+
+test_8021q_ngroups_ctl6()
+{
+	test_8021q_ngroups_reporting_ctl6
+}
+
+test_8021qvs_ngroups_cfg4()
+{
+	test_8021qvs_ngroups_reporting_cfg4
+	test_8021qvs_ngroups_cross_vlan_cfg4
+}
+
+test_8021qvs_ngroups_ctl4()
+{
+	test_8021qvs_ngroups_reporting_ctl4
+	test_8021qvs_ngroups_cross_vlan_ctl4
+}
+
+test_8021qvs_ngroups_cfg6()
+{
+	test_8021qvs_ngroups_reporting_cfg6
+	test_8021qvs_ngroups_cross_vlan_cfg6
+}
+
+test_8021qvs_ngroups_ctl6()
+{
+	test_8021qvs_ngroups_reporting_ctl6
+	test_8021qvs_ngroups_cross_vlan_ctl6
+}
+
+# maxgroups test suites
+
+test_8021d_maxgroups_cfg4()
+{
+	test_8021d_maxgroups_zero_cfg4
+	test_8021d_maxgroups_too_low_cfg4
+	test_8021d_maxgroups_too_many_entries_cfg4
+}
+
+test_8021d_maxgroups_ctl4()
+{
+	test_8021d_maxgroups_zero_ctl4
+	test_8021d_maxgroups_too_low_ctl4
+	test_8021d_maxgroups_too_many_entries_ctl4
+}
+
+test_8021d_maxgroups_cfg6()
+{
+	test_8021d_maxgroups_zero_cfg6
+	test_8021d_maxgroups_too_low_cfg6
+	test_8021d_maxgroups_too_many_entries_cfg6
+}
+
+test_8021d_maxgroups_ctl6()
+{
+	test_8021d_maxgroups_zero_ctl6
+	test_8021d_maxgroups_too_low_ctl6
+	test_8021d_maxgroups_too_many_entries_ctl6
+}
+
+test_8021q_maxgroups_cfg4()
+{
+	test_8021q_maxgroups_zero_cfg4
+	test_8021q_maxgroups_too_low_cfg4
+	test_8021q_maxgroups_too_many_entries_cfg4
+}
+
+test_8021q_maxgroups_ctl4()
+{
+	test_8021q_maxgroups_zero_ctl4
+	test_8021q_maxgroups_too_low_ctl4
+	test_8021q_maxgroups_too_many_entries_ctl4
+}
+
+test_8021q_maxgroups_cfg6()
+{
+	test_8021q_maxgroups_zero_cfg6
+	test_8021q_maxgroups_too_low_cfg6
+	test_8021q_maxgroups_too_many_entries_cfg6
+}
+
+test_8021q_maxgroups_ctl6()
+{
+	test_8021q_maxgroups_zero_ctl6
+	test_8021q_maxgroups_too_low_ctl6
+	test_8021q_maxgroups_too_many_entries_ctl6
+}
+
+test_8021qvs_maxgroups_cfg4()
+{
+	test_8021qvs_maxgroups_zero_cfg4
+	test_8021qvs_maxgroups_zero_cross_vlan_cfg4
+	test_8021qvs_maxgroups_too_low_cfg4
+	test_8021qvs_maxgroups_too_many_entries_cfg4
+	test_8021qvs_maxgroups_too_many_cross_vlan_cfg4
+}
+
+test_8021qvs_maxgroups_ctl4()
+{
+	test_8021qvs_maxgroups_zero_ctl4
+	test_8021qvs_maxgroups_zero_cross_vlan_ctl4
+	test_8021qvs_maxgroups_too_low_ctl4
+	test_8021qvs_maxgroups_too_many_entries_ctl4
+	test_8021qvs_maxgroups_too_many_cross_vlan_ctl4
+}
+
+test_8021qvs_maxgroups_cfg6()
+{
+	test_8021qvs_maxgroups_zero_cfg6
+	test_8021qvs_maxgroups_zero_cross_vlan_cfg6
+	test_8021qvs_maxgroups_too_low_cfg6
+	test_8021qvs_maxgroups_too_many_entries_cfg6
+	test_8021qvs_maxgroups_too_many_cross_vlan_cfg6
+}
+
+test_8021qvs_maxgroups_ctl6()
+{
+	test_8021qvs_maxgroups_zero_ctl6
+	test_8021qvs_maxgroups_zero_cross_vlan_ctl6
+	test_8021qvs_maxgroups_too_low_ctl6
+	test_8021qvs_maxgroups_too_many_entries_ctl6
+	test_8021qvs_maxgroups_too_many_cross_vlan_ctl6
+}
+
+# other test suites
+
+test_8021qvs_toggle_vlan_snooping()
+{
+	test_toggle_vlan_snooping_temp
+	test_toggle_vlan_snooping_permanent
+}
+
+# test groups
+
+test_8021d()
+{
+	# Tests for vlan_filtering 0 mcast_vlan_snooping 0.
+
+	switch_create_8021d
+	setup_wait
+
+	test_8021d_ngroups_cfg4
+	test_8021d_ngroups_ctl4
+	test_8021d_ngroups_cfg6
+	test_8021d_ngroups_ctl6
+	test_8021d_maxgroups_cfg4
+	test_8021d_maxgroups_ctl4
+	test_8021d_maxgroups_cfg6
+	test_8021d_maxgroups_ctl6
+
+	switch_destroy
+}
+
+test_8021q()
+{
+	# Tests for vlan_filtering 1 mcast_vlan_snooping 0.
+
+	switch_create_8021q
+	setup_wait
+
+	test_8021q_vlan_attributes
+	test_8021q_ngroups_cfg4
+	test_8021q_ngroups_ctl4
+	test_8021q_ngroups_cfg6
+	test_8021q_ngroups_ctl6
+	test_8021q_maxgroups_cfg4
+	test_8021q_maxgroups_ctl4
+	test_8021q_maxgroups_cfg6
+	test_8021q_maxgroups_ctl6
+
+	switch_destroy
+}
+
+test_8021qvs()
+{
+	# Tests for vlan_filtering 1 mcast_vlan_snooping 1.
+
+	switch_create_8021qvs
+	setup_wait
+
+	test_8021qvs_vlan_attributes
+	test_8021qvs_ngroups_cfg4
+	test_8021qvs_ngroups_ctl4
+	test_8021qvs_ngroups_cfg6
+	test_8021qvs_ngroups_ctl6
+	test_8021qvs_maxgroups_cfg4
+	test_8021qvs_maxgroups_ctl4
+	test_8021qvs_maxgroups_cfg6
+	test_8021qvs_maxgroups_ctl6
+	test_8021qvs_toggle_vlan_snooping
+
+	switch_destroy
+}
+
+if ! bridge link help 2>&1 | grep -q "mcast_max_groups"; then
+	echo "SKIP: iproute2 too old, missing bridge \"mcast_max_groups\" support"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh b/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh
new file mode 100755
index 0000000000..1a0480e71d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh
@@ -0,0 +1,118 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Verify that permanent mdb entries can be added to and deleted from bridge
+# interfaces that are down, and works correctly when done so.
+
+ALL_TESTS="add_del_to_port_down"
+NUM_NETIFS=4
+
+TEST_GROUP="239.10.10.10"
+TEST_GROUP_MAC="01:00:5e:0a:0a:0a"
+
+source lib.sh
+
+
+add_del_to_port_down() {
+	RET=0
+
+	ip link set dev $swp2 down
+	bridge mdb add dev br0 port "$swp2" grp $TEST_GROUP permanent 2>/dev/null
+	check_err $? "Failed adding mdb entry"
+
+	ip link set dev $swp2 up
+	setup_wait_dev $swp2
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
+	check_fail $? "Traffic to $TEST_GROUP wasn't forwarded"
+
+	ip link set dev $swp2 down
+	bridge mdb show dev br0 | grep -q "$TEST_GROUP permanent" 2>/dev/null
+	check_err $? "MDB entry did not persist after link up/down"
+
+	bridge mdb del dev br0 port "$swp2" grp $TEST_GROUP 2>/dev/null
+	check_err $? "Failed deleting mdb entry"
+
+	ip link set dev $swp2 up
+	setup_wait_dev $swp2
+	mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2
+	check_err $? "Traffic to $TEST_GROUP was forwarded after entry removed"
+
+	log_test "MDB add/del entry to port with state down "
+}
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	# Enable multicast filtering
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+
+	bridge link set dev $swp2 mcast_flood off
+	# Bridge currently has a "grace time" at creation time before it
+	# forwards multicast according to the mdb. Since we disable the
+	# mcast_flood setting per port
+	sleep 10
+}
+
+switch_destroy()
+{
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h1_destroy
+	h2_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_mld.sh b/tools/testing/selftests/net/forwarding/bridge_mld.sh
new file mode 100755
index 0000000000..e2b9ff773c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_mld.sh
@@ -0,0 +1,564 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="mldv2include_test mldv2inc_allow_test mldv2inc_is_include_test mldv2inc_is_exclude_test \
+	   mldv2inc_to_exclude_test mldv2exc_allow_test mldv2exc_is_include_test \
+	   mldv2exc_is_exclude_test mldv2exc_to_exclude_test mldv2inc_block_test \
+	   mldv2exc_block_test mldv2exc_timeout_test mldv2star_ex_auto_add_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="ff02::cc"
+TEST_GROUP_MAC="33:33:00:00:00:cc"
+
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::1,2001:db8:1::2,2001:db8:1::3
+MZPKT_IS_INC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:\
+00:00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:\
+00:05:02:00:00:00:00:8f:00:8e:d9:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:\
+00:00:00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:\
+00:00:00:00:00:00:02:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03"
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
+MZPKT_IS_INC2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:\
+00:00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:\
+05:02:00:00:00:00:8f:00:8e:ac:00:00:00:01:01:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:\
+00:00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:\
+00:00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
+# MLDv2 is_in report: grp ff02::cc is_include 2001:db8:1::20,2001:db8:1::30
+MZPKT_IS_INC3="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:bc:5a:00:00:00:01:01:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+# MLDv2 allow report: grp ff02::cc allow 2001:db8:1::10,2001:db8:1::11,2001:db8:1::12
+MZPKT_ALLOW="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:\
+00:00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:\
+02:00:00:00:00:8f:00:8a:ac:00:00:00:01:05:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:\
+00:cc:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:10:20:01:0d:b8:00:01:00:00:00:00:00:00:00:\
+00:00:11:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:12"
+# MLDv2 allow report: grp ff02::cc allow 2001:db8:1::20,2001:db8:1::30
+MZPKT_ALLOW2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:b8:5a:00:00:00:01:05:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+# MLDv2 is_ex report: grp ff02::cc is_exclude 2001:db8:1::1,2001:db8:1::2,2001:db8:1::20,2001:db8:1::21
+MZPKT_IS_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:64:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:5f:d0:00:00:00:01:02:00:00:04:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:02:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:21"
+# MLDv2 is_ex report: grp ff02::cc is_exclude 2001:db8:1::20,2001:db8:1::30
+MZPKT_IS_EXC2="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:44:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:bb:5a:00:00:00:01:02:00:00:02:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+# MLDv2 to_ex report: grp ff02::cc to_exclude 2001:db8:1::1,2001:db8:1::20,2001:db8:1::30
+MZPKT_TO_EXC="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:00:\
+00:00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:\
+00:00:00:8f:00:8b:8e:00:00:00:01:04:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:\
+01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+# MLDv2 block report: grp ff02::cc block 2001:db8:1::1,2001:db8:1::20,2001:db8:1::30
+MZPKT_BLOCK="33:33:00:00:00:01:fe:54:00:04:5e:ba:86:dd:60:0a:2d:ae:00:54:00:01:fe:80:00:00:00:00:\
+00:00:fc:54:00:ff:fe:04:5e:ba:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:01:3a:00:05:02:00:00:\
+00:00:8f:00:89:8e:00:00:00:01:06:00:00:03:ff:02:00:00:00:00:00:00:00:00:00:00:00:00:00:cc:20:01:\
+0d:b8:00:01:00:00:00:00:00:00:00:00:00:01:20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:20:20:01:\
+0d:b8:00:01:00:00:00:00:00:00:00:00:00:30"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_query_response_interval 100 \
+					mcast_mld_version 2 mcast_startup_query_interval 300 \
+					mcast_querier 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	# make sure a query has been generated
+	sleep 5
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+mldv2include_prepare()
+{
+	local host1_if=$1
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::3")
+
+	ip link set dev br0 type bridge mcast_mld_version 2
+	check_err $? "Could not change bridge MLD version to 2"
+
+	$MZ $host1_if $MZPKT_IS_INC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null)" &>/dev/null
+	check_err $? "Missing *,G entry with source list"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+}
+
+mldv2exclude_prepare()
+{
+	local host1_if=$1
+	local mac=$2
+	local group=$3
+	local pkt=$4
+	local X=("2001:db8:1::1" "2001:db8:1::2")
+	local Y=("2001:db8:1::20" "2001:db8:1::21")
+
+	mldv2include_prepare $h1
+
+	$MZ $host1_if -c 1 $MZPKT_IS_EXC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+			 .source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::3\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::3 entry still exists"
+}
+
+mldv2cleanup()
+{
+	local port=$1
+
+	bridge mdb del dev br0 port $port grp $TEST_GROUP
+	ip link set dev br0 type bridge mcast_mld_version 1
+}
+
+mldv2include_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::3")
+
+	mldv2include_prepare $h1
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP is_include"
+
+	mldv2cleanup $swp1
+}
+
+mldv2inc_allow_test()
+{
+	RET=0
+	local X=("2001:db8:1::10" "2001:db8:1::11" "2001:db8:1::12")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_ALLOW -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP include -> allow"
+
+	mldv2cleanup $swp1
+}
+
+mldv2inc_is_include_test()
+{
+	RET=0
+	local X=("2001:db8:1::10" "2001:db8:1::11" "2001:db8:1::12")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_INC2 -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 "2001:db8:1::100"
+
+	log_test "MLDv2 report $TEST_GROUP include -> is_include"
+
+	mldv2cleanup $swp1
+}
+
+mldv2inc_is_exclude_test()
+{
+	RET=0
+
+	mldv2exclude_prepare $h1
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP include -> is_exclude"
+
+	mldv2cleanup $swp1
+}
+
+mldv2inc_to_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::1")
+	local Y=("2001:db8:1::20" "2001:db8:1::30")
+
+	mldv2include_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_TO_EXC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"exclude\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::2 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::21\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::21 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP include -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_allow_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::20" "2001:db8:1::30")
+	local Y=("2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_ALLOW2 -q
+	sleep 1
+	brmcast_check_sg_entries "allow" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> allow"
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_is_include_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::20" "2001:db8:1::30")
+	local Y=("2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_INC3 -q
+	sleep 1
+	brmcast_check_sg_entries "is_include" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> is_include"
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_is_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::30")
+	local Y=("2001:db8:1::20")
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_IS_EXC2 -q
+	sleep 1
+	brmcast_check_sg_entries "is_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> is_exclude"
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_to_exclude_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::30")
+	local Y=("2001:db8:1::20")
+
+	mldv2exclude_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_TO_EXC -q
+	sleep 1
+	brmcast_check_sg_entries "to_exclude" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> to_exclude"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
+mldv2inc_block_test()
+{
+	RET=0
+	local X=("2001:db8:1::2" "2001:db8:1::3")
+
+	mldv2include_prepare $h1
+
+	$MZ $h1 -c 1 $MZPKT_BLOCK -q
+	# make sure the lowered timers have expired (by default 2 seconds)
+	sleep 3
+	brmcast_check_sg_entries "block" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::1 entry still exists"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 2001:db8:1::100
+
+	log_test "MLDv2 report $TEST_GROUP include -> block"
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_block_test()
+{
+	RET=0
+	local X=("2001:db8:1::1" "2001:db8:1::2" "2001:db8:1::30")
+	local Y=("2001:db8:1::20" "2001:db8:1::21")
+
+	mldv2exclude_prepare $h1
+
+	ip link set dev br0 type bridge mcast_last_member_interval 500
+	check_err $? "Could not change mcast_last_member_interval to 5s"
+
+	$MZ $h1 -c 1 $MZPKT_BLOCK -q
+	sleep 1
+	brmcast_check_sg_entries "block" "${X[@]}" "${Y[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+	brmcast_check_sg_state 1 "${Y[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}" 2001:db8:1::100
+	brmcast_check_sg_fwding 0 "${Y[@]}"
+
+	log_test "MLDv2 report $TEST_GROUP exclude -> block"
+
+	ip link set dev br0 type bridge mcast_last_member_interval 100
+
+	mldv2cleanup $swp1
+}
+
+mldv2exc_timeout_test()
+{
+	RET=0
+	local X=("2001:db8:1::20" "2001:db8:1::30")
+
+	# GMI should be 3 seconds
+	ip link set dev br0 type bridge mcast_query_interval 100 \
+					mcast_query_response_interval 100 \
+					mcast_membership_interval 300
+
+	mldv2exclude_prepare $h1
+	ip link set dev br0 type bridge mcast_query_interval 500 \
+					mcast_query_response_interval 500 \
+					mcast_membership_interval 1500
+
+	$MZ $h1 -c 1 $MZPKT_ALLOW2 -q
+	sleep 3
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and .filter_mode == \"include\")" &>/dev/null
+	check_err $? "Wrong *,G entry filter mode"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::1\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::1 entry still exists"
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and \
+				.source_list != null and
+				.source_list[].address == \"2001:db8:1::2\")" &>/dev/null
+	check_fail $? "Wrong *,G entry source list, 2001:db8:1::2 entry still exists"
+
+	brmcast_check_sg_entries "allow" "${X[@]}"
+
+	brmcast_check_sg_state 0 "${X[@]}"
+
+	brmcast_check_sg_fwding 1 "${X[@]}"
+	brmcast_check_sg_fwding 0 2001:db8:1::100
+
+	log_test "MLDv2 group $TEST_GROUP exclude timeout"
+
+	ip link set dev br0 type bridge mcast_query_interval 12500 \
+					mcast_query_response_interval 1000 \
+					mcast_membership_interval 26000
+
+	mldv2cleanup $swp1
+}
+
+mldv2star_ex_auto_add_test()
+{
+	RET=0
+
+	mldv2exclude_prepare $h1
+
+	$MZ $h2 -c 1 $MZPKT_IS_INC -q
+	sleep 1
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"2001:db8:1::3\" and \
+				.port == \"$swp1\")" &>/dev/null
+	check_err $? "S,G entry for *,G port doesn't exist"
+
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .src == \"2001:db8:1::3\" and \
+				.port == \"$swp1\" and \
+				.flags[] == \"added_by_star_ex\")" &>/dev/null
+	check_err $? "Auto-added S,G entry doesn't have added_by_star_ex flag"
+
+	brmcast_check_sg_fwding 1 2001:db8:1::3
+
+	log_test "MLDv2 S,G port entry automatic add to a *,G port"
+
+	mldv2cleanup $swp1
+	mldv2cleanup $swp2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
new file mode 100755
index 0000000000..a43b4645c4
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 flooding"
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+h3_destroy()
+{
+	simple_if_fini $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+	ip link set dev $swp3 master br0
+
+	ip link set dev $swp1 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp1"
+	ip link set dev $swp2 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp2"
+	ip link set dev $swp3 type bridge_slave isolated off
+	check_err $? "Can't disable isolation on port $swp3"
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+	ip link set dev $swp3 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp3 down
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	RET=0
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked when it should not have"
+
+	RET=0
+	ping_do $h3 192.0.2.2
+	check_err $? "Ping didn't work when it should have"
+
+	log_test "Isolated port ping"
+}
+
+ping_ipv6()
+{
+	RET=0
+	ping6_do $h1 2001:db8:1::2
+	check_fail $? "Ping6 worked when it should not have"
+
+	RET=0
+	ping6_do $h3 2001:db8:1::2
+	check_err $? "Ping6 didn't work when it should have"
+
+	log_test "Isolated port ping6"
+}
+
+flooding()
+{
+	local mac=de:ad:be:ef:13:37
+	local ip=192.0.2.100
+
+	RET=0
+	flood_test_do false $mac $ip $h1 $h2
+	check_err $? "Packet was flooded when it should not have been"
+
+	RET=0
+	flood_test_do true $mac $ip $h3 $h2
+	check_err $? "Packet was not flooded when it should have been"
+
+	log_test "Isolated port flooding"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
new file mode 100755
index 0000000000..1f8ef0eff8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
@@ -0,0 +1,69 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="sticky"
+NUM_NETIFS=4
+TEST_MAC=de:ad:be:ef:13:37
+source lib.sh
+
+switch_create()
+{
+	ip link add dev br0 type bridge
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $h1 up
+	ip link set dev $swp1 up
+	ip link set dev $h2 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $h2 down
+	ip link set dev $swp1 down
+	ip link set dev $h1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+	h2=${NETIFS[p3]}
+	swp2=${NETIFS[p4]}
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+	switch_destroy
+}
+
+sticky()
+{
+	bridge fdb add $TEST_MAC dev $swp1 master static sticky
+	check_err $? "Could not add fdb entry"
+	bridge fdb del $TEST_MAC dev $swp1 vlan 1 master static sticky
+	$MZ $h2 -c 1 -a $TEST_MAC -t arp "request" -q
+	bridge -j fdb show br br0 brport $swp1\
+		| jq -e ".[] | select(.mac == \"$TEST_MAC\")" &> /dev/null
+	check_err $? "Did not find FDB record when should"
+
+	log_test "Sticky fdb entry"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
new file mode 100755
index 0000000000..64bd00fe9a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
@@ -0,0 +1,152 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn"
+NUM_NETIFS=4
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge \
+		vlan_filtering 1 \
+		ageing_time $LOW_AGEING_TIME \
+		mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+learning()
+{
+	learning_test "br0" $swp1 $h1 $h2
+}
+
+flooding()
+{
+	flood_test $swp2 $h1 $h2
+}
+
+vlan_deletion()
+{
+	# Test that the deletion of a VLAN on a bridge port does not affect
+	# the PVID VLAN
+	log_info "Add and delete a VLAN on bridge port $swp1"
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ping_ipv4
+	ping_ipv6
+}
+
+extern_learn()
+{
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	# Test that externally learned FDB entries can roam, but not age out
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "Did not find FDB entry when should"
+
+	# Wait for 10 seconds after the ageing time to make sure the FDB entry
+	# was not aged out
+	ageing_time=$(bridge_ageing_time_get br0)
+	sleep $((ageing_time + 10))
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry was aged out when should not"
+
+	$MZ $h2 -c 1 -p 64 -a $mac -t ip -q
+
+	bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry did not roam when should"
+
+	log_test "Externally learned FDB entry - ageing & roaming"
+
+	bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null
+	bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh
new file mode 100755
index 0000000000..72dfbeaf56
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh
@@ -0,0 +1,546 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="vlmc_control_test vlmc_querier_test vlmc_igmp_mld_version_test \
+	   vlmc_last_member_test vlmc_startup_query_test vlmc_membership_test \
+	   vlmc_querier_intvl_test vlmc_query_intvl_test vlmc_query_response_intvl_test \
+	   vlmc_router_port_test vlmc_filtering_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="239.10.10.10"
+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+	ip link add l $h1 $h1.10 up type vlan id 10
+}
+
+h1_destroy()
+{
+	ip link del $h1.10
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+	ip link add l $h2 $h2.10 up type vlan id 10
+}
+
+h2_destroy()
+{
+	ip link del $h2.10
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+
+	bridge vlan add vid 10-11 dev $swp1 master
+	bridge vlan add vid 10-11 dev $swp2 master
+
+	ip link set dev br0 type bridge mcast_vlan_snooping 1
+	check_err $? "Could not enable global vlan multicast snooping"
+	log_test "Vlan multicast snooping enable"
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlmc_v2join_test()
+{
+	local expect=$1
+
+	RET=0
+	ip address add dev $h2.10 $TEST_GROUP/32 autojoin
+	check_err $? "Could not join $TEST_GROUP"
+
+	sleep 5
+	bridge -j mdb show dev br0 |
+		jq -e ".[].mdb[] | select(.grp == \"$TEST_GROUP\" and .vid == 10)" &>/dev/null
+	if [ $expect -eq 0 ]; then
+		check_err $? "IGMPv2 report didn't create mdb entry for $TEST_GROUP"
+	else
+		check_fail $? "IGMPv2 report shouldn't have created mdb entry for $TEST_GROUP"
+	fi
+
+	# check if we need to cleanup
+	if [ $RET -eq 0 ]; then
+		ip address del dev $h2.10 $TEST_GROUP/32 2>&1 1>/dev/null
+		sleep 5
+		bridge -j mdb show dev br0 |
+			jq -e ".[].mdb[] | select(.grp == \"$TEST_GROUP\" and \
+						  .vid == 10)" &>/dev/null
+		check_fail $? "IGMPv2 leave didn't remove mdb entry for $TEST_GROUP"
+	fi
+}
+
+vlmc_control_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+	log_test "Vlan global options existence"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_snooping == 1) " &>/dev/null
+	check_err $? "Wrong default mcast_snooping global option value"
+	log_test "Vlan mcast_snooping global option default value"
+
+	RET=0
+	vlmc_v2join_test 0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 0
+	check_err $? "Could not disable multicast snooping in vlan 10"
+	vlmc_v2join_test 1
+	log_test "Vlan 10 multicast snooping control"
+}
+
+# setup for general query counting
+vlmc_query_cnt_xstats()
+{
+	local type=$1
+	local version=$2
+	local dev=$3
+
+	ip -j link xstats type bridge_slave dev $dev | \
+	jq -e ".[].multicast.${type}_queries.tx_v${version}"
+}
+
+vlmc_query_cnt_setup()
+{
+	local type=$1
+	local dev=$2
+
+	if [[ $type == "igmp" ]]; then
+		tc filter add dev $dev egress pref 10 prot 802.1Q \
+			flower vlan_id 10 vlan_ethtype ipv4 dst_ip 224.0.0.1 ip_proto 2 \
+			action pass
+	else
+		tc filter add dev $dev egress pref 10 prot 802.1Q \
+			flower vlan_id 10 vlan_ethtype ipv6 dst_ip ff02::1 ip_proto icmpv6 \
+			action pass
+	fi
+
+	ip link set dev br0 type bridge mcast_stats_enabled 1
+}
+
+vlmc_query_cnt_cleanup()
+{
+	local dev=$1
+
+	ip link set dev br0 type bridge mcast_stats_enabled 0
+	tc filter del dev $dev egress pref 10
+}
+
+vlmc_check_query()
+{
+	local type=$1
+	local version=$2
+	local dev=$3
+	local expect=$4
+	local time=$5
+	local ret=0
+
+	vlmc_query_cnt_setup $type $dev
+
+	local pre_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev)
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1
+	ret=$?
+	if [[ $ret -eq 0 ]]; then
+		sleep $time
+
+		local tcstats=$(tc_rule_stats_get $dev 10 egress)
+		local post_tx_xstats=$(vlmc_query_cnt_xstats $type $version $dev)
+
+		if [[ $tcstats != $expect || \
+		      $(($post_tx_xstats-$pre_tx_xstats)) != $expect || \
+		      $tcstats != $(($post_tx_xstats-$pre_tx_xstats)) ]]; then
+			ret=1
+		fi
+	fi
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 0
+	vlmc_query_cnt_cleanup $dev
+
+	return $ret
+}
+
+vlmc_querier_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_querier == 0) " &>/dev/null
+	check_err $? "Wrong default mcast_querier global vlan option value"
+	log_test "Vlan mcast_querier global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1
+	check_err $? "Could not enable querier in vlan 10"
+	log_test "Vlan 10 multicast querier enable"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 0
+
+	RET=0
+	vlmc_check_query igmp 2 $swp1 1 1
+	check_err $? "No vlan tagged IGMPv2 general query packets sent"
+	log_test "Vlan 10 tagged IGMPv2 general query sent"
+
+	RET=0
+	vlmc_check_query mld 1 $swp1 1 1
+	check_err $? "No vlan tagged MLD general query packets sent"
+	log_test "Vlan 10 tagged MLD general query sent"
+}
+
+vlmc_igmp_mld_version_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_igmp_version == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_igmp_version global vlan option value"
+	log_test "Vlan mcast_igmp_version global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and .mcast_mld_version == 1) " &>/dev/null
+	check_err $? "Wrong default mcast_mld_version global vlan option value"
+	log_test "Vlan mcast_mld_version global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 3
+	check_err $? "Could not set mcast_igmp_version in vlan 10"
+	log_test "Vlan 10 mcast_igmp_version option changed to 3"
+
+	RET=0
+	vlmc_check_query igmp 3 $swp1 1 1
+	check_err $? "No vlan tagged IGMPv3 general query packets sent"
+	log_test "Vlan 10 tagged IGMPv3 general query sent"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 2
+	check_err $? "Could not set mcast_mld_version in vlan 10"
+	log_test "Vlan 10 mcast_mld_version option changed to 2"
+
+	RET=0
+	vlmc_check_query mld 2 $swp1 1 1
+	check_err $? "No vlan tagged MLDv2 general query packets sent"
+	log_test "Vlan 10 tagged MLDv2 general query sent"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_igmp_version 2
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_mld_version 1
+}
+
+vlmc_last_member_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_last_member_count == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_last_member_count global vlan option value"
+	log_test "Vlan mcast_last_member_count global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_last_member_interval == 100) " &>/dev/null
+	check_err $? "Wrong default mcast_last_member_interval global vlan option value"
+	log_test "Vlan mcast_last_member_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_count 3
+	check_err $? "Could not set mcast_last_member_count in vlan 10"
+	log_test "Vlan 10 mcast_last_member_count option changed to 3"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_count 2
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_interval 200
+	check_err $? "Could not set mcast_last_member_interval in vlan 10"
+	log_test "Vlan 10 mcast_last_member_interval option changed to 200"
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_last_member_interval 100
+}
+
+vlmc_startup_query_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_startup_query_interval == 3125) " &>/dev/null
+	check_err $? "Wrong default mcast_startup_query_interval global vlan option value"
+	log_test "Vlan mcast_startup_query_interval global option default value"
+
+	RET=0
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_startup_query_count == 2) " &>/dev/null
+	check_err $? "Wrong default mcast_startup_query_count global vlan option value"
+	log_test "Vlan mcast_startup_query_count global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_interval 100
+	check_err $? "Could not set mcast_startup_query_interval in vlan 10"
+	vlmc_check_query igmp 2 $swp1 2 3
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_startup_query_interval option changed to 100"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 3
+	check_err $? "Could not set mcast_startup_query_count in vlan 10"
+	vlmc_check_query igmp 2 $swp1 3 4
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_startup_query_count option changed to 3"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_interval 3125
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2
+}
+
+vlmc_membership_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_membership_interval == 26000) " &>/dev/null
+	check_err $? "Wrong default mcast_membership_interval global vlan option value"
+	log_test "Vlan mcast_membership_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_membership_interval 200
+	check_err $? "Could not set mcast_membership_interval in vlan 10"
+	log_test "Vlan 10 mcast_membership_interval option changed to 200"
+
+	RET=0
+	vlmc_v2join_test 1
+	log_test "Vlan 10 mcast_membership_interval mdb entry expire"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_membership_interval 26000
+}
+
+vlmc_querier_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_querier_interval == 25500) " &>/dev/null
+	check_err $? "Wrong default mcast_querier_interval global vlan option value"
+	log_test "Vlan mcast_querier_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier_interval 100
+	check_err $? "Could not set mcast_querier_interval in vlan 10"
+	log_test "Vlan 10 mcast_querier_interval option changed to 100"
+
+	RET=0
+	ip link add dev br1 type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 \
+					mcast_vlan_snooping 1
+	bridge vlan add vid 10 dev br1 self pvid untagged
+	ip link set dev $h1 master br1
+	ip link set dev br1 up
+	bridge vlan add vid 10 dev $h1 master
+	bridge vlan global set vid 10 dev br1 mcast_snooping 1 mcast_querier 1
+	sleep 2
+	ip link del dev br1
+	ip addr replace 2001:db8:1::1/64 dev $h1
+	vlmc_check_query igmp 2 $swp1 1 1
+	check_err $? "Wrong number of IGMPv2 general queries after querier interval"
+	log_test "Vlan 10 mcast_querier_interval expire after outside query"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier_interval 25500
+}
+
+vlmc_query_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_query_interval == 12500) " &>/dev/null
+	check_err $? "Wrong default mcast_query_interval global vlan option value"
+	log_test "Vlan mcast_query_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 200
+	check_err $? "Could not set mcast_query_interval in vlan 10"
+	# 1 is sent immediately, then 2 more in the next 5 seconds
+	vlmc_check_query igmp 2 $swp1 3 5
+	check_err $? "Wrong number of tagged IGMPv2 general queries sent"
+	log_test "Vlan 10 mcast_query_interval option changed to 200"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_startup_query_count 2
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_interval 12500
+}
+
+vlmc_query_response_intvl_test()
+{
+	RET=0
+	local goutput=`bridge -j vlan global show`
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10)" &>/dev/null
+	check_err $? "Could not find vlan 10's global options"
+
+	echo -n $goutput |
+		jq -e ".[].vlans[] | select(.vlan == 10 and \
+					    .mcast_query_response_interval == 1000) " &>/dev/null
+	check_err $? "Wrong default mcast_query_response_interval global vlan option value"
+	log_test "Vlan mcast_query_response_interval global option default value"
+
+	RET=0
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 200
+	check_err $? "Could not set mcast_query_response_interval in vlan 10"
+	log_test "Vlan 10 mcast_query_response_interval option changed to 200"
+
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 1000
+}
+
+vlmc_router_port_test()
+{
+	RET=0
+	local goutput=`bridge -j -d vlan show`
+	echo -n $goutput |
+		jq -e ".[] | select(.ifname == \"$swp1\" and \
+				    .vlans[].vlan == 10)" &>/dev/null
+	check_err $? "Could not find port vlan 10's options"
+
+	echo -n $goutput |
+		jq -e ".[] | select(.ifname == \"$swp1\" and \
+				    .vlans[].vlan == 10 and \
+				    .vlans[].mcast_router == 1)" &>/dev/null
+	check_err $? "Wrong default port mcast_router option value"
+	log_test "Port vlan 10 option mcast_router default value"
+
+	RET=0
+	bridge vlan set vid 10 dev $swp1 mcast_router 2
+	check_err $? "Could not set port vlan 10's mcast_router option"
+	log_test "Port vlan 10 mcast_router option changed to 2"
+
+	RET=0
+	tc filter add dev $swp1 egress pref 10 prot 802.1Q \
+		flower vlan_id 10 vlan_ethtype ipv4 dst_ip 239.1.1.1 ip_proto udp action pass
+	tc filter add dev $swp2 egress pref 10 prot 802.1Q \
+		flower vlan_id 10 vlan_ethtype ipv4 dst_ip 239.1.1.1 ip_proto udp action pass
+	bridge vlan set vid 10 dev $swp2 mcast_router 0
+	# we need to enable querier and disable query response interval to
+	# make sure packets are flooded only to router ports
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_querier 1 \
+					      mcast_query_response_interval 0
+	bridge vlan add vid 10 dev br0 self
+	sleep 1
+	mausezahn br0 -Q 10 -c 10 -p 128 -b 01:00:5e:01:01:01 -B 239.1.1.1 \
+			-t udp "dp=1024" &>/dev/null
+	local swp1_tcstats=$(tc_rule_stats_get $swp1 10 egress)
+	if [[ $swp1_tcstats != 10 ]]; then
+		check_err 1 "Wrong number of vlan 10 multicast packets flooded"
+	fi
+	local swp2_tcstats=$(tc_rule_stats_get $swp2 10 egress)
+	check_err $swp2_tcstats "Vlan 10 multicast packets flooded to non-router port"
+	log_test "Flood unknown vlan multicast packets to router port only"
+
+	tc filter del dev $swp2 egress pref 10
+	tc filter del dev $swp1 egress pref 10
+	bridge vlan del vid 10 dev br0 self
+	bridge vlan global set vid 10 dev br0 mcast_snooping 1 mcast_query_response_interval 1000
+	bridge vlan set vid 10 dev $swp2 mcast_router 1
+	bridge vlan set vid 10 dev $swp1 mcast_router 1
+}
+
+vlmc_filtering_test()
+{
+	RET=0
+	ip link set dev br0 type bridge vlan_filtering 0
+	ip -j -d link show dev br0 | \
+	jq -e "select(.[0].linkinfo.info_data.mcast_vlan_snooping == 1)" &>/dev/null
+	check_fail $? "Vlan filtering is disabled but multicast vlan snooping is still enabled"
+	log_test "Disable multicast vlan snooping when vlan filtering is disabled"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh
new file mode 100755
index 0000000000..1c8a260465
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh
@@ -0,0 +1,105 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge \
+		ageing_time $LOW_AGEING_TIME \
+		mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+learning()
+{
+	learning_test "br0" $swp1 $h1 $h2
+}
+
+flooding()
+{
+	flood_test $swp2 $h1 $h2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
new file mode 100644
index 0000000000..697994a927
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/config
@@ -0,0 +1,19 @@
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_VRF=m
+CONFIG_BPF_SYSCALL=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NET_ACT_CT=m
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_MPLS=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_VETH=m
+CONFIG_NAMESPACES=y
+CONFIG_NET_NS=y
diff --git a/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh
new file mode 100755
index 0000000000..56eb83d1a3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/custom_multipath_hash.sh
@@ -0,0 +1,372 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test traffic distribution between two paths when using custom hash policy.
+#
+# +--------------------------------+
+# | H1                             |
+# |                     $h1 +      |
+# |   198.51.100.{2-253}/24 |      |
+# |   2001:db8:1::{2-fd}/64 |      |
+# +-------------------------|------+
+#                           |
+# +-------------------------|-------------------------+
+# | SW1                     |                         |
+# |                    $rp1 +                         |
+# |         198.51.100.1/24                           |
+# |        2001:db8:1::1/64                           |
+# |                                                   |
+# |                                                   |
+# |            $rp11 +             + $rp12            |
+# |     192.0.2.1/28 |             | 192.0.2.17/28    |
+# | 2001:db8:2::1/64 |             | 2001:db8:3::1/64 |
+# +------------------|-------------|------------------+
+#                    |             |
+# +------------------|-------------|------------------+
+# | SW2              |             |                  |
+# |                  |             |                  |
+# |            $rp21 +             + $rp22            |
+# |     192.0.2.2/28                 192.0.2.18/28    |
+# | 2001:db8:2::2/64                 2001:db8:3::2/64 |
+# |                                                   |
+# |                                                   |
+# |                    $rp2 +                         |
+# |          203.0.113.1/24 |                         |
+# |        2001:db8:4::1/64 |                         |
+# +-------------------------|-------------------------+
+#                           |
+# +-------------------------|------+
+# | H2                      |      |
+# |                     $h2 +      |
+# |    203.0.113.{2-253}/24        |
+# |   2001:db8:4::{2-fd}/64        |
+# +--------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	custom_hash
+"
+
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.2/24 2001:db8:1::2/64
+	ip route add vrf v$h1 default via 198.51.100.1 dev $h1
+	ip -6 route add vrf v$h1 default via 2001:db8:1::1 dev $h1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 default
+	ip route del vrf v$h1 default
+	simple_if_fini $h1 198.51.100.2/24 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $rp1 198.51.100.1/24 2001:db8:1::1/64
+	__simple_if_init $rp11 v$rp1 192.0.2.1/28 2001:db8:2::1/64
+	__simple_if_init $rp12 v$rp1 192.0.2.17/28 2001:db8:3::1/64
+
+	ip route add vrf v$rp1 203.0.113.0/24 \
+		nexthop via 192.0.2.2 dev $rp11 \
+		nexthop via 192.0.2.18 dev $rp12
+
+	ip -6 route add vrf v$rp1 2001:db8:4::/64 \
+		nexthop via 2001:db8:2::2 dev $rp11 \
+		nexthop via 2001:db8:3::2 dev $rp12
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$rp1 2001:db8:4::/64
+
+	ip route del vrf v$rp1 203.0.113.0/24
+
+	__simple_if_fini $rp12 192.0.2.17/28 2001:db8:3::1/64
+	__simple_if_fini $rp11 192.0.2.1/28 2001:db8:2::1/64
+	simple_if_fini $rp1 198.51.100.1/24 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $rp2 203.0.113.1/24 2001:db8:4::1/64
+	__simple_if_init $rp21 v$rp2 192.0.2.2/28 2001:db8:2::2/64
+	__simple_if_init $rp22 v$rp2 192.0.2.18/28 2001:db8:3::2/64
+
+	ip route add vrf v$rp2 198.51.100.0/24 \
+		nexthop via 192.0.2.1 dev $rp21 \
+		nexthop via 192.0.2.17 dev $rp22
+
+	ip -6 route add vrf v$rp2 2001:db8:1::/64 \
+		nexthop via 2001:db8:2::1 dev $rp21 \
+		nexthop via 2001:db8:3::1 dev $rp22
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$rp2 2001:db8:1::/64
+
+	ip route del vrf v$rp2 198.51.100.0/24
+
+	__simple_if_fini $rp22 192.0.2.18/28 2001:db8:3::2/64
+	__simple_if_fini $rp21 192.0.2.2/28 2001:db8:2::2/64
+	simple_if_fini $rp2 203.0.113.1/24 2001:db8:4::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 203.0.113.2/24 2001:db8:4::2/64
+	ip route add vrf v$h2 default via 203.0.113.1 dev $h2
+	ip -6 route add vrf v$h2 default via 2001:db8:4::1 dev $h2
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 default
+	ip route del vrf v$h2 default
+	simple_if_fini $h2 203.0.113.2/24 2001:db8:4::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	rp1=${NETIFS[p2]}
+
+	rp11=${NETIFS[p3]}
+	rp21=${NETIFS[p4]}
+
+	rp12=${NETIFS[p5]}
+	rp22=${NETIFS[p6]}
+
+	rp2=${NETIFS[p7]}
+
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 203.0.113.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:4::2
+}
+
+send_src_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A "198.51.100.2-198.51.100.253" -B 203.0.113.2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B "203.0.113.2-203.0.113.253" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_src_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+send_src_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A "2001:db8:1::2-2001:db8:1::fd" -B 2001:db8:4::2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B "2001:db8:4::2-2001:db8:4::fd" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_flowlabel()
+{
+	# Generate 16384 echo requests, each with a random flow label.
+	for _ in $(seq 1 16384); do
+		ip vrf exec v$h1 \
+			$PING6 2001:db8:4::2 -F 0 -c 1 -q >/dev/null 2>&1
+	done
+}
+
+send_src_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:4::2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:4::2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+custom_hash_test()
+{
+	local field="$1"; shift
+	local balanced="$1"; shift
+	local send_flows="$@"
+
+	RET=0
+
+	local t0_rp11=$(link_stats_tx_packets_get $rp11)
+	local t0_rp12=$(link_stats_tx_packets_get $rp12)
+
+	$send_flows
+
+	local t1_rp11=$(link_stats_tx_packets_get $rp11)
+	local t1_rp12=$(link_stats_tx_packets_get $rp12)
+
+	local d_rp11=$((t1_rp11 - t0_rp11))
+	local d_rp12=$((t1_rp12 - t0_rp12))
+
+	local diff=$((d_rp12 - d_rp11))
+	local sum=$((d_rp11 + d_rp12))
+
+	local pct=$(echo "$diff / $sum * 100" | bc -l)
+	local is_balanced=$(echo "-20 <= $pct && $pct <= 20" | bc)
+
+	[[ ( $is_balanced -eq 1 && $balanced == "balanced" ) ||
+	   ( $is_balanced -eq 0 && $balanced == "unbalanced" ) ]]
+	check_err $? "Expected traffic to be $balanced, but it is not"
+
+	log_test "Multipath hash field: $field ($balanced)"
+	log_info "Packets sent on path1 / path2: $d_rp11 / $d_rp12"
+}
+
+custom_hash_v4()
+{
+	log_info "Running IPv4 custom multipath hash tests"
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 3
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv4.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0001
+	custom_hash_test "Source IP" "balanced" send_src_ipv4
+	custom_hash_test "Source IP" "unbalanced" send_dst_ipv4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0002
+	custom_hash_test "Destination IP" "balanced" send_dst_ipv4
+	custom_hash_test "Destination IP" "unbalanced" send_src_ipv4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0010
+	custom_hash_test "Source port" "balanced" send_src_udp4
+	custom_hash_test "Source port" "unbalanced" send_dst_udp4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0020
+	custom_hash_test "Destination port" "balanced" send_dst_udp4
+	custom_hash_test "Destination port" "unbalanced" send_src_udp4
+
+	sysctl_restore net.ipv4.neigh.default.gc_thresh3
+	sysctl_restore net.ipv4.neigh.default.gc_thresh2
+	sysctl_restore net.ipv4.neigh.default.gc_thresh1
+
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+custom_hash_v6()
+{
+	log_info "Running IPv6 custom multipath hash tests"
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 3
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv6.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0001
+	custom_hash_test "Source IP" "balanced" send_src_ipv6
+	custom_hash_test "Source IP" "unbalanced" send_dst_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0002
+	custom_hash_test "Destination IP" "balanced" send_dst_ipv6
+	custom_hash_test "Destination IP" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0008
+	custom_hash_test "Flowlabel" "balanced" send_flowlabel
+	custom_hash_test "Flowlabel" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0010
+	custom_hash_test "Source port" "balanced" send_src_udp6
+	custom_hash_test "Source port" "unbalanced" send_dst_udp6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0020
+	custom_hash_test "Destination port" "balanced" send_dst_udp6
+	custom_hash_test "Destination port" "unbalanced" send_src_udp6
+
+	sysctl_restore net.ipv6.neigh.default.gc_thresh3
+	sysctl_restore net.ipv6.neigh.default.gc_thresh2
+	sysctl_restore net.ipv6.neigh.default.gc_thresh1
+
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+custom_hash()
+{
+	# Test that when the hash policy is set to custom, traffic is
+	# distributed only according to the fields set in the
+	# fib_multipath_hash_fields sysctl.
+	#
+	# Each time set a different field and make sure traffic is only
+	# distributed when the field is changed in the packet stream.
+	custom_hash_v4
+	custom_hash_v6
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh
new file mode 100644
index 0000000000..f1de525cfa
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh
@@ -0,0 +1,596 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+##############################################################################
+# Defines
+
+if [[ ! -v DEVLINK_DEV ]]; then
+	DEVLINK_DEV=$(devlink port show "${NETIFS[p1]:-$NETIF_NO_CABLE}" -j \
+			     | jq -r '.port | keys[]' | cut -d/ -f-2)
+	if [ -z "$DEVLINK_DEV" ]; then
+		echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
+		exit $ksft_skip
+	fi
+	if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
+		echo "SKIP: devlink device's bus is not PCI"
+		exit $ksft_skip
+	fi
+
+	DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
+			 -n | cut -d" " -f3)
+elif [[ ! -z "$DEVLINK_DEV" ]]; then
+	devlink dev show $DEVLINK_DEV &> /dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: devlink device \"$DEVLINK_DEV\" not found"
+		exit $ksft_skip
+	fi
+fi
+
+##############################################################################
+# Sanity checks
+
+devlink help 2>&1 | grep resource &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink resource support"
+	exit $ksft_skip
+fi
+
+devlink help 2>&1 | grep trap &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink trap support"
+	exit $ksft_skip
+fi
+
+devlink dev help 2>&1 | grep info &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink dev info support"
+	exit $ksft_skip
+fi
+
+##############################################################################
+# Devlink helpers
+
+devlink_resource_names_to_path()
+{
+	local resource
+	local path=""
+
+	for resource in "${@}"; do
+		if [ "$path" == "" ]; then
+			path="$resource"
+		else
+			path="${path}/$resource"
+		fi
+	done
+
+	echo "$path"
+}
+
+devlink_resource_get()
+{
+	local name=$1
+	local resource_name=.[][\"$DEVLINK_DEV\"]
+
+	resource_name="$resource_name | .[] | select (.name == \"$name\")"
+
+	shift
+	for resource in "${@}"; do
+		resource_name="${resource_name} | .[\"resources\"][] | \
+			       select (.name == \"$resource\")"
+	done
+
+	devlink -j resource show "$DEVLINK_DEV" | jq "$resource_name"
+}
+
+devlink_resource_size_get()
+{
+	local size=$(devlink_resource_get "$@" | jq '.["size_new"]')
+
+	if [ "$size" == "null" ]; then
+		devlink_resource_get "$@" | jq '.["size"]'
+	else
+		echo "$size"
+	fi
+}
+
+devlink_resource_size_set()
+{
+	local new_size=$1
+	local path
+
+	shift
+	path=$(devlink_resource_names_to_path "$@")
+	devlink resource set "$DEVLINK_DEV" path "$path" size "$new_size"
+	check_err $? "Failed setting path $path to size $size"
+}
+
+devlink_resource_occ_get()
+{
+	devlink_resource_get "$@" | jq '.["occ"]'
+}
+
+devlink_reload()
+{
+	local still_pending
+
+	devlink dev reload "$DEVLINK_DEV" &> /dev/null
+	check_err $? "Failed reload"
+
+	still_pending=$(devlink resource show "$DEVLINK_DEV" | \
+			grep -c "size_new")
+	check_err $still_pending "Failed reload - There are still unset sizes"
+}
+
+declare -A DEVLINK_ORIG
+
+# Changing pool type from static to dynamic causes reinterpretation of threshold
+# values. They therefore need to be saved before pool type is changed, then the
+# pool type can be changed, and then the new values need to be set up. Therefore
+# instead of saving the current state implicitly in the _set call, provide
+# functions for all three primitives: save, set, and restore.
+
+devlink_port_pool_threshold()
+{
+	local port=$1; shift
+	local pool=$1; shift
+
+	devlink sb port pool show $port pool $pool -j \
+		| jq '.port_pool."'"$port"'"[].threshold'
+}
+
+devlink_port_pool_th_save()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local key="port_pool($port,$pool).threshold"
+
+	DEVLINK_ORIG[$key]=$(devlink_port_pool_threshold $port $pool)
+}
+
+devlink_port_pool_th_set()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local th=$1; shift
+
+	devlink sb port pool set $port pool $pool th $th
+}
+
+devlink_port_pool_th_restore()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local key="port_pool($port,$pool).threshold"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z $orig ]]; then
+		echo "WARNING: Mismatched devlink_port_pool_th_restore"
+	else
+		devlink sb port pool set $port pool $pool th $orig
+	fi
+}
+
+devlink_pool_size_thtype()
+{
+	local pool=$1; shift
+
+	devlink sb pool show "$DEVLINK_DEV" pool $pool -j \
+	    | jq -r '.pool[][] | (.size, .thtype)'
+}
+
+devlink_pool_size_thtype_save()
+{
+	local pool=$1; shift
+	local key="pool($pool).size_thtype"
+
+	DEVLINK_ORIG[$key]=$(devlink_pool_size_thtype $pool)
+}
+
+devlink_pool_size_thtype_set()
+{
+	local pool=$1; shift
+	local thtype=$1; shift
+	local size=$1; shift
+
+	devlink sb pool set "$DEVLINK_DEV" pool $pool size $size thtype $thtype
+}
+
+devlink_pool_size_thtype_restore()
+{
+	local pool=$1; shift
+	local key="pool($pool).size_thtype"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z ${orig[0]} ]]; then
+		echo "WARNING: Mismatched devlink_pool_size_thtype_restore"
+	else
+		devlink sb pool set "$DEVLINK_DEV" pool $pool \
+			size ${orig[0]} thtype ${orig[1]}
+	fi
+}
+
+devlink_tc_bind_pool_th()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+
+	devlink sb tc bind show $port tc $tc type $dir -j \
+	    | jq -r '.tc_bind[][] | (.pool, .threshold)'
+}
+
+devlink_tc_bind_pool_th_save()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local key="tc_bind($port,$dir,$tc).pool_th"
+
+	DEVLINK_ORIG[$key]=$(devlink_tc_bind_pool_th $port $tc $dir)
+}
+
+devlink_tc_bind_pool_th_set()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local pool=$1; shift
+	local th=$1; shift
+
+	devlink sb tc bind set $port tc $tc type $dir pool $pool th $th
+}
+
+devlink_tc_bind_pool_th_restore()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local key="tc_bind($port,$dir,$tc).pool_th"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z ${orig[0]} ]]; then
+		echo "WARNING: Mismatched devlink_tc_bind_pool_th_restore"
+	else
+		devlink sb tc bind set $port tc $tc type $dir \
+			pool ${orig[0]} th ${orig[1]}
+	fi
+}
+
+devlink_traps_num_get()
+{
+	devlink -j trap | jq '.[]["'$DEVLINK_DEV'"] | length'
+}
+
+devlink_traps_get()
+{
+	devlink -j trap | jq -r '.[]["'$DEVLINK_DEV'"][].name'
+}
+
+devlink_trap_type_get()
+{
+	local trap_name=$1; shift
+
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].type'
+}
+
+devlink_trap_action_set()
+{
+	local trap_name=$1; shift
+	local action=$1; shift
+
+	# Pipe output to /dev/null to avoid expected warnings.
+	devlink trap set $DEVLINK_DEV trap $trap_name \
+		action $action &> /dev/null
+}
+
+devlink_trap_action_get()
+{
+	local trap_name=$1; shift
+
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].action'
+}
+
+devlink_trap_group_get()
+{
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].group'
+}
+
+devlink_trap_metadata_test()
+{
+	local trap_name=$1; shift
+	local metadata=$1; shift
+
+	devlink -jv trap show $DEVLINK_DEV trap $trap_name \
+		| jq -e '.[][][].metadata | contains(["'$metadata'"])' \
+		&> /dev/null
+}
+
+devlink_trap_rx_packets_get()
+{
+	local trap_name=$1; shift
+
+	devlink -js trap show $DEVLINK_DEV trap $trap_name \
+		| jq '.[][][]["stats"]["rx"]["packets"]'
+}
+
+devlink_trap_rx_bytes_get()
+{
+	local trap_name=$1; shift
+
+	devlink -js trap show $DEVLINK_DEV trap $trap_name \
+		| jq '.[][][]["stats"]["rx"]["bytes"]'
+}
+
+devlink_trap_drop_packets_get()
+{
+	local trap_name=$1; shift
+
+	devlink -js trap show $DEVLINK_DEV trap $trap_name \
+		| jq '.[][][]["stats"]["rx"]["dropped"]'
+}
+
+devlink_trap_stats_idle_test()
+{
+	local trap_name=$1; shift
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t0_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	sleep 1
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t1_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+devlink_trap_drop_stats_idle_test()
+{
+	local trap_name=$1; shift
+	local t0_packets t0_bytes
+
+	t0_packets=$(devlink_trap_drop_packets_get $trap_name)
+
+	sleep 1
+
+	t1_packets=$(devlink_trap_drop_packets_get $trap_name)
+
+	if [[ $t0_packets -eq $t1_packets ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+devlink_traps_enable_all()
+{
+	local trap_name
+
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_action_set $trap_name "trap"
+	done
+}
+
+devlink_traps_disable_all()
+{
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_action_set $trap_name "drop"
+	done
+}
+
+devlink_trap_groups_get()
+{
+	devlink -j trap group | jq -r '.[]["'$DEVLINK_DEV'"][].name'
+}
+
+devlink_trap_group_action_set()
+{
+	local group_name=$1; shift
+	local action=$1; shift
+
+	# Pipe output to /dev/null to avoid expected warnings.
+	devlink trap group set $DEVLINK_DEV group $group_name action $action \
+		&> /dev/null
+}
+
+devlink_trap_group_rx_packets_get()
+{
+	local group_name=$1; shift
+
+	devlink -js trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["stats"]["rx"]["packets"]'
+}
+
+devlink_trap_group_rx_bytes_get()
+{
+	local group_name=$1; shift
+
+	devlink -js trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["stats"]["rx"]["bytes"]'
+}
+
+devlink_trap_group_stats_idle_test()
+{
+	local group_name=$1; shift
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+
+	t0_packets=$(devlink_trap_group_rx_packets_get $group_name)
+	t0_bytes=$(devlink_trap_group_rx_bytes_get $group_name)
+
+	sleep 1
+
+	t1_packets=$(devlink_trap_group_rx_packets_get $group_name)
+	t1_bytes=$(devlink_trap_group_rx_bytes_get $group_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+devlink_trap_exception_test()
+{
+	local trap_name=$1; shift
+	local group_name
+
+	group_name=$(devlink_trap_group_get $trap_name)
+
+	devlink_trap_stats_idle_test $trap_name
+	check_fail $? "Trap stats idle when packets should have been trapped"
+
+	devlink_trap_group_stats_idle_test $group_name
+	check_fail $? "Trap group idle when packets should have been trapped"
+}
+
+devlink_trap_drop_test()
+{
+	local trap_name=$1; shift
+	local dev=$1; shift
+	local handle=$1; shift
+	local group_name
+
+	group_name=$(devlink_trap_group_get $trap_name)
+
+	# This is the common part of all the tests. It checks that stats are
+	# initially idle, then non-idle after changing the trap action and
+	# finally idle again. It also makes sure the packets are dropped and
+	# never forwarded.
+	devlink_trap_stats_idle_test $trap_name
+	check_err $? "Trap stats not idle with initial drop action"
+	devlink_trap_group_stats_idle_test $group_name
+	check_err $? "Trap group stats not idle with initial drop action"
+
+	devlink_trap_action_set $trap_name "trap"
+	devlink_trap_stats_idle_test $trap_name
+	check_fail $? "Trap stats idle after setting action to trap"
+	devlink_trap_group_stats_idle_test $group_name
+	check_fail $? "Trap group stats idle after setting action to trap"
+
+	devlink_trap_action_set $trap_name "drop"
+
+	devlink_trap_stats_idle_test $trap_name
+	check_err $? "Trap stats not idle after setting action to drop"
+	devlink_trap_group_stats_idle_test $group_name
+	check_err $? "Trap group stats not idle after setting action to drop"
+
+	tc_check_packets "dev $dev egress" $handle 0
+	check_err $? "Packets were not dropped"
+}
+
+devlink_trap_drop_cleanup()
+{
+	local mz_pid=$1; shift
+	local dev=$1; shift
+	local proto=$1; shift
+	local pref=$1; shift
+	local handle=$1; shift
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	tc filter del dev $dev egress protocol $proto pref $pref handle $handle flower
+}
+
+devlink_trap_stats_check()
+{
+	local trap_name=$1; shift
+	local send_one="$@"
+	local t0_packets
+	local t1_packets
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+
+	$send_one && sleep 1
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+
+	[[ $t1_packets -ne $t0_packets ]]
+}
+
+devlink_trap_stats_test()
+{
+	local test_name=$1; shift
+
+	RET=0
+
+	devlink_trap_stats_check "$@"
+	check_err $? "Trap stats did not increase"
+
+	log_test "$test_name"
+}
+
+devlink_trap_policers_num_get()
+{
+	devlink -j -p trap policer show | jq '.[]["'$DEVLINK_DEV'"] | length'
+}
+
+devlink_trap_policer_rate_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["rate"]'
+}
+
+devlink_trap_policer_burst_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["burst"]'
+}
+
+devlink_trap_policer_rx_dropped_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p -s trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["stats"]["rx"]["dropped"]'
+}
+
+devlink_trap_group_policer_get()
+{
+	local group_name=$1; shift
+
+	devlink -j -p trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["policer"]'
+}
+
+devlink_port_by_netdev()
+{
+	local if_name=$1
+
+	devlink -j port show $if_name | jq -e '.[] | keys' | jq -r '.[]'
+}
+
+devlink_cpu_port_get()
+{
+	local cpu_dl_port_num=$(devlink port list | grep "$DEVLINK_DEV" |
+				grep cpu | cut -d/ -f3 | cut -d: -f1 |
+				sed -n '1p')
+
+	echo "$DEVLINK_DEV/$cpu_dl_port_num"
+}
+
+devlink_cell_size_get()
+{
+	devlink sb pool show "$DEVLINK_DEV" pool 0 -j \
+	    | jq '.pool[][].cell_size'
+}
+
+devlink_pool_size_get()
+{
+	devlink sb show "$DEVLINK_DEV" -j | jq '.[][][]["size"]'
+}
diff --git a/tools/testing/selftests/net/forwarding/dual_vxlan_bridge.sh b/tools/testing/selftests/net/forwarding/dual_vxlan_bridge.sh
new file mode 100755
index 0000000000..68ee92df3e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/dual_vxlan_bridge.sh
@@ -0,0 +1,367 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                               +----------------------+
+# | H1 (vrf)           |                               |             H2 (vrf) |
+# |    + h1.10         |                               |  + h2.20             |
+# |    | 192.0.2.1/28  |                               |  | 192.0.2.2/28      |
+# |    |               |                               |  |                   |
+# |    + $h1           |                               |  + $h2               |
+# |    |               |                               |  |                   |
+# +----|---------------+                               +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|--------------------+
+# | SW |                                                  |                    |
+# | +--|-------------------------------+ +----------------|------------------+ |
+# | |  + $swp1         BR1 (802.1ad)   | | BR2 (802.1d)   + $swp2            | |
+# | |    vid 100 pvid untagged         | |                |                  | |
+# | |                                  | |                + $swp2.20         | |
+# | |                                  | |                                   | |
+# | |  + vx100 (vxlan)                 | |  + vx200 (vxlan)                  | |
+# | |    local 192.0.2.17              | |    local 192.0.2.17               | |
+# | |    remote 192.0.2.34             | |    remote 192.0.2.50              | |
+# | |    id 1000 dstport $VXPORT       | |    id 2000 dstport $VXPORT        | |
+# | |    vid 100 pvid untagged         | |                                   | |
+# | +--------------------------------- + +-----------------------------------+ |
+# |                                                                            |
+# |  192.0.2.32/28 via 192.0.2.18                                              |
+# |  192.0.2.48/28 via 192.0.2.18                                              |
+# |                                                                            |
+# |    + $rp1                                                                  |
+# |    | 192.0.2.17/28                                                         |
+# +----|-----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                 BR3 (802.1ad) | |   | |                  BR3 (802.1d) | |
+# | |  + vx100 (vxlan)              | |   | |  + vx200 (vxlan)              | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
+# | |    vid 100 pvid untagged      | |   | |                               | |
+# | |                               | |   | |  + w1.20                      | |
+# | |                               | |   | |  |                            | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 100 pvid untagged      | |   | |  |                            | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |  |                            | |   | |  |                            | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.10                      | |   | |  + w2.20                      | |
+# | |    192.0.2.3/28               | |   | |    192.0.2.4/28               | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 20 v$h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	#### BR1 ####
+	ip link add name br1 type bridge vlan_filtering 1 \
+		vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0
+	ip link set dev br1 addrgenmode none
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	#### BR2 ####
+	ip link add name br2 type bridge vlan_filtering 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br2 address $(mac_get $swp2)
+	ip link set dev br2 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	#### VX100 ####
+	ip link add name vx100 type vxlan id 1000 local 192.0.2.17 \
+		dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev vx100 master br1
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 100 dev $swp1 pvid untagged
+
+	#### VX200 ####
+	ip link add name vx200 type vxlan id 2000 local 192.0.2.17 \
+		dstport "$VXPORT" nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx200 up
+
+	ip link set dev vx200 master br2
+
+	ip link set dev $swp2 up
+	ip link add name $swp2.20 link $swp2 type vlan id 20
+	ip link set dev $swp2.20 master br2
+	ip link set dev $swp2.20 up
+
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx200 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx200 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx200 nomaster
+	ip link set dev vx200 down
+	ip link del dev vx200
+
+	ip link del dev $swp2.20
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 100 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx100 nomaster
+	ip link set dev vx100 down
+	ip link del dev vx100
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br2 down
+	ip link del dev br2
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local vxlan_name=$1; shift
+	local vxlan_id=$1; shift
+	local vlan_id=$1; shift
+	local host_addr=$1; shift
+	local nh_addr=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br3 type bridge vlan_filtering 0
+	ip link set dev br3 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br3
+	ip link set dev w1 up
+
+	ip link add name $vxlan_name type vxlan id $vxlan_id local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev $vxlan_name up
+	bridge fdb append dev $vxlan_name 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev $vxlan_name 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev $vxlan_name master br3
+	tc qdisc add dev $vxlan_name clsact
+
+	simple_if_init w2
+	vlan_create w2 $vlan_id vw2 $host_addr/28
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 vx100 1000 10 192.0.2.3 \
+	      192.0.2.33
+
+	in_ns ns1 bridge vlan add vid 100 dev vx100 pvid untagged
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 vx200 2000 20 192.0.2.4 \
+	      192.0.2.49
+
+	in_ns ns2 ip link add name w1.20 link w1 type vlan id 20
+	in_ns ns2 ip link set dev w1.20 master br3
+	in_ns ns2 ip link set dev w1.20 up
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.3 ": local->remote 1 through VxLAN with an 802.1ad bridge"
+	ping_test $h2 192.0.2.4 ": local->remote 2 through VxLAN with an 802.1d bridge"
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ethtool.sh b/tools/testing/selftests/net/forwarding/ethtool.sh
new file mode 100755
index 0000000000..aa2eafb7b2
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool.sh
@@ -0,0 +1,301 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	same_speeds_autoneg_off
+	different_speeds_autoneg_off
+	combination_of_neg_on_and_off
+	advertise_subset_of_speeds
+	check_highest_speed_is_chosen
+	different_speeds_autoneg_on
+"
+NUM_NETIFS=2
+source lib.sh
+source ethtool_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+}
+
+same_speeds_autoneg_off()
+{
+	# Check that when each of the reported speeds is forced, the links come
+	# up and are operational.
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))
+
+	for speed in "${speeds_arr[@]}"; do
+		RET=0
+		ethtool_set $h1 speed $speed autoneg off
+		ethtool_set $h2 speed $speed autoneg off
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "speed $speed autoneg off"
+		log_test "force of same speed autoneg off"
+		log_info "speed = $speed"
+	done
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_off()
+{
+	# Test that when we force different speeds, links are not up and ping
+	# fails.
+	RET=0
+
+	local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
+	local speed1=${speeds_arr[0]}
+	local speed2=${speeds_arr[1]}
+
+	ethtool_set $h1 speed $speed1 autoneg off
+	ethtool_set $h2 speed $speed2 autoneg off
+
+	setup_wait_dev_with_timeout $h1
+	setup_wait_dev_with_timeout $h2
+	ping_do $h1 192.0.2.2
+	check_fail $? "ping with different speeds"
+
+	log_test "force of different speeds autoneg off"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+combination_of_neg_on_and_off()
+{
+	# Test that when one device is forced to a speed supported by both
+	# endpoints and the other device is configured to autoneg on, the links
+	# are up and ping passes.
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+	for speed in "${speeds_arr[@]}"; do
+		RET=0
+		ethtool_set $h1 speed $speed autoneg off
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "h1-speed=$speed autoneg off, h2 autoneg on"
+		log_test "one side with autoneg off and another with autoneg on"
+		log_info "force speed = $speed"
+	done
+
+	ethtool -s $h1 autoneg on
+}
+
+hex_speed_value_get()
+{
+	local speed=$1; shift
+
+	local shift_size=${speed_values[$speed]}
+	speed=$((0x1 << $"shift_size"))
+	printf "%#x" "$speed"
+}
+
+subset_of_common_speeds_get()
+{
+	local dev1=$1; shift
+	local dev2=$1; shift
+	local adver=$1; shift
+
+	local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
+	local speed_to_advertise=0
+	local speed_to_remove=${speeds_arr[0]}
+	speed_to_remove+='base'
+
+	local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))
+
+	for speed in ${speeds_mode_arr[@]}; do
+		if [[ $speed != $speed_to_remove* ]]; then
+			speed=$(hex_speed_value_get $speed)
+			speed_to_advertise=$(($speed_to_advertise | \
+						$speed))
+		fi
+
+	done
+
+	# Convert to hex.
+	printf "%#x" "$speed_to_advertise"
+}
+
+speed_to_advertise_get()
+{
+	# The function returns the hex number that is composed by OR-ing all
+	# the modes corresponding to the provided speed.
+	local speed_without_mode=$1; shift
+	local supported_speeds=("$@"); shift
+	local speed_to_advertise=0
+
+	speed_without_mode+='base'
+
+	for speed in ${supported_speeds[@]}; do
+		if [[ $speed == $speed_without_mode* ]]; then
+			speed=$(hex_speed_value_get $speed)
+			speed_to_advertise=$(($speed_to_advertise | \
+						$speed))
+		fi
+
+	done
+
+	# Convert to hex.
+	printf "%#x" "$speed_to_advertise"
+}
+
+advertise_subset_of_speeds()
+{
+	# Test that when one device advertises a subset of speeds and another
+	# advertises a specific speed (but all modes of this speed), the links
+	# are up and ping passes.
+	RET=0
+
+	local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+	ethtool_set $h1 advertise $speed_1_to_advertise
+
+	if [ $RET != 0 ]; then
+		log_test "advertise subset of speeds"
+		return
+	fi
+
+	local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
+	# Check only speeds that h1 advertised. Remove the first speed.
+	unset speeds_arr_without_mode[0]
+	local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))
+
+	for speed_value in ${speeds_arr_without_mode[@]}; do
+		RET=0
+		local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
+			"${speeds_arr_with_mode[@]}")
+		ethtool_set $h2 advertise $speed_2_to_advertise
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
+
+		log_test "advertise subset of speeds"
+		log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
+	done
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+check_highest_speed_is_chosen()
+{
+	# Test that when one device advertises a subset of speeds, the other
+	# chooses the highest speed. This test checks configuration without
+	# traffic.
+	RET=0
+
+	local max_speed
+	local chosen_speed
+	local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+
+	ethtool_set $h1 advertise $speed_to_advertise
+
+	if [ $RET != 0 ]; then
+		log_test "check highest speed"
+		return
+	fi
+
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+	max_speed=${speeds_arr[0]}
+	for current in ${speeds_arr[@]}; do
+		if [[ $current -gt $max_speed ]]; then
+			max_speed=$current
+		fi
+	done
+
+	setup_wait_dev_with_timeout $h1
+	setup_wait_dev_with_timeout $h2
+	chosen_speed=$(ethtool $h1 | grep 'Speed:')
+	chosen_speed=${chosen_speed%"Mb/s"*}
+	chosen_speed=${chosen_speed#*"Speed: "}
+	((chosen_speed == max_speed))
+	check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"
+
+	log_test "check highest speed"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_on()
+{
+	# Test that when we configure links to advertise different speeds,
+	# links are not up and ping fails.
+	RET=0
+
+	local -a speeds=($(different_speeds_get $h1 $h2 1 1))
+	local speed1=${speeds[0]}
+	local speed2=${speeds[1]}
+
+	speed1=$(hex_speed_value_get $speed1)
+	speed2=$(hex_speed_value_get $speed2)
+
+	ethtool_set $h1 advertise $speed1
+	ethtool_set $h2 advertise $speed2
+
+	if (($RET)); then
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_fail $? "ping with different speeds autoneg on"
+	fi
+
+	log_test "advertise different speeds autoneg on"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+skip_on_veth
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+declare -gA speed_values
+eval "speed_values=($(speeds_arr_get))"
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh
new file mode 100755
index 0000000000..17f89c3b7c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	autoneg
+	autoneg_force_mode
+	no_cable
+"
+
+NUM_NETIFS=2
+source lib.sh
+source ethtool_lib.sh
+
+TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms
+
+setup_prepare()
+{
+	swp1=${NETIFS[p1]}
+	swp2=${NETIFS[p2]}
+	swp3=$NETIF_NO_CABLE
+}
+
+ethtool_ext_state()
+{
+	local dev=$1; shift
+	local expected_ext_state=$1; shift
+	local expected_ext_substate=${1:-""}; shift
+
+	local ext_state=$(ethtool $dev | grep "Link detected" \
+		| cut -d "(" -f2 | cut -d ")" -f1)
+	local ext_substate=$(echo $ext_state | cut -sd "," -f2 \
+		| sed -e 's/^[[:space:]]*//')
+	ext_state=$(echo $ext_state | cut -d "," -f1)
+
+	if [[ $ext_state != $expected_ext_state ]]; then
+		echo "Expected \"$expected_ext_state\", got \"$ext_state\""
+		return 1
+	fi
+	if [[ $ext_substate != $expected_ext_substate ]]; then
+		echo "Expected \"$expected_ext_substate\", got \"$ext_substate\""
+		return 1
+	fi
+}
+
+autoneg()
+{
+	local msg
+
+	RET=0
+
+	ip link set dev $swp1 up
+
+	msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \
+			"Autoneg" "No partner detected")
+	check_err $? "$msg"
+
+	log_test "Autoneg, No partner detected"
+
+	ip link set dev $swp1 down
+}
+
+autoneg_force_mode()
+{
+	local msg
+
+	RET=0
+
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0))
+	local speed1=${speeds_arr[0]}
+	local speed2=${speeds_arr[1]}
+
+	ethtool_set $swp1 speed $speed1 autoneg off
+	ethtool_set $swp2 speed $speed2 autoneg off
+
+	msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \
+			"Autoneg" "No partner detected during force mode")
+	check_err $? "$msg"
+
+	msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \
+			"Autoneg" "No partner detected during force mode")
+	check_err $? "$msg"
+
+	log_test "Autoneg, No partner detected during force mode"
+
+	ethtool -s $swp2 autoneg on
+	ethtool -s $swp1 autoneg on
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+}
+
+no_cable()
+{
+	local msg
+
+	RET=0
+
+	ip link set dev $swp3 up
+
+	msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable")
+	check_err $? "$msg"
+
+	log_test "No cable"
+
+	ip link set dev $swp3 down
+}
+
+skip_on_veth
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/net/forwarding/ethtool_lib.sh
new file mode 100644
index 0000000000..b9bfb45085
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool_lib.sh
@@ -0,0 +1,120 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+speeds_arr_get()
+{
+	cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \
+		{sub(/,$/, "") \
+		sub(/ETHTOOL_LINK_MODE_/,"") \
+		sub(/_BIT/,"") \
+		sub(/_Full/,"/Full") \
+		sub(/_Half/,"/Half");\
+		print "["$1"]="$3}'
+
+	awk "${cmd}" /usr/include/linux/ethtool.h
+}
+
+ethtool_set()
+{
+	local cmd="$@"
+	local out=$(ethtool -s $cmd 2>&1 | wc -l)
+
+	check_err $out "error in configuration. $cmd"
+}
+
+dev_linkmodes_params_get()
+{
+	local dev=$1; shift
+	local adver=$1; shift
+	local -a linkmodes_params
+	local param_count
+	local arr
+
+	if (($adver)); then
+		mode="Advertised link modes"
+	else
+		mode="Supported link modes"
+	fi
+
+	local -a dev_linkmodes=($(dev_speeds_get $dev 1 $adver))
+	for ((i=0; i<${#dev_linkmodes[@]}; i++)); do
+		linkmodes_params[$i]=$(echo -e "${dev_linkmodes[$i]}" | \
+			# Replaces all non numbers with spaces
+			sed -e 's/[^0-9]/ /g' | \
+			# Squeeze spaces in sequence to 1 space
+			tr -s ' ')
+		# Count how many numbers were found in the linkmode
+		param_count=$(echo "${linkmodes_params[$i]}" | wc -w)
+		if [[ $param_count -eq 1 ]]; then
+			linkmodes_params[$i]="${linkmodes_params[$i]} 1"
+		elif [[ $param_count -ge 3 ]]; then
+			arr=(${linkmodes_params[$i]})
+			# Take only first two params
+			linkmodes_params[$i]=$(echo "${arr[@]:0:2}")
+		fi
+	done
+	echo ${linkmodes_params[@]}
+}
+
+dev_speeds_get()
+{
+	local dev=$1; shift
+	local with_mode=$1; shift
+	local adver=$1; shift
+	local speeds_str
+
+	if (($adver)); then
+		mode="Advertised link modes"
+	else
+		mode="Supported link modes"
+	fi
+
+	speeds_str=$(ethtool "$dev" | \
+		# Snip everything before the link modes section.
+		sed -n '/'"$mode"':/,$p' | \
+		# Quit processing the rest at the start of the next section.
+		# When checking, skip the header of this section (hence the 2,).
+		sed -n '2,${/^[\t][^ \t]/q};p' | \
+		# Drop the section header of the current section.
+		cut -d':' -f2)
+
+	local -a speeds_arr=($speeds_str)
+	if [[ $with_mode -eq 0 ]]; then
+		for ((i=0; i<${#speeds_arr[@]}; i++)); do
+			speeds_arr[$i]=${speeds_arr[$i]%base*}
+		done
+	fi
+	echo ${speeds_arr[@]}
+}
+
+common_speeds_get()
+{
+	dev1=$1; shift
+	dev2=$1; shift
+	with_mode=$1; shift
+	adver=$1; shift
+
+	local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver))
+	local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver))
+
+	comm -12 \
+		<(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \
+		<(printf '%s\n' "${dev2_speeds[@]}" | sort -u)
+}
+
+different_speeds_get()
+{
+	local dev1=$1; shift
+	local dev2=$1; shift
+	local with_mode=$1; shift
+	local adver=$1; shift
+
+	local -a speeds_arr
+
+	speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver))
+	if [[ ${#speeds_arr[@]} < 2 ]]; then
+		check_err 1 "cannot check different speeds. There are not enough speeds"
+	fi
+
+	echo ${speeds_arr[0]} ${speeds_arr[1]}
+}
diff --git a/tools/testing/selftests/net/forwarding/ethtool_mm.sh b/tools/testing/selftests/net/forwarding/ethtool_mm.sh
new file mode 100755
index 0000000000..39e736f303
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool_mm.sh
@@ -0,0 +1,296 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	manual_with_verification_h1_to_h2
+	manual_with_verification_h2_to_h1
+	manual_without_verification_h1_to_h2
+	manual_without_verification_h2_to_h1
+	manual_failed_verification_h1_to_h2
+	manual_failed_verification_h2_to_h1
+	lldp
+"
+
+NUM_NETIFS=2
+REQUIRE_MZ=no
+PREEMPTIBLE_PRIO=0
+source lib.sh
+
+traffic_test()
+{
+	local if=$1; shift
+	local src=$1; shift
+	local num_pkts=10000
+	local before=
+	local after=
+	local delta=
+
+	before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src)
+
+	$MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO
+
+	after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src)
+
+	delta=$((after - before))
+
+	# Allow an extra 1% tolerance for random packets sent by the stack
+	[ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ]
+}
+
+manual_with_verification()
+{
+	local tx=$1; shift
+	local rx=$1; shift
+
+	RET=0
+
+	# It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit
+	# Processing state diagram whether the "send_r" variable (send response
+	# to verification frame) should be taken into consideration while the
+	# MAC Merge TX direction is disabled. That being said, at least the
+	# NXP ENETC does not, and requires tx-enabled on in order to respond to
+	# the link partner's verification frames.
+	ethtool --set-mm $rx tx-enabled on
+	ethtool --set-mm $tx verify-enabled on tx-enabled on
+
+	# Wait for verification to finish
+	sleep 1
+
+	ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+		grep -q 'SUCCEEDED'
+	check_err "$?" "Verification did not succeed"
+
+	ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+	check_err "$?" "pMAC TX is not active"
+
+	traffic_test $tx "pmac"
+	check_err "$?" "Traffic did not get sent through $tx's pMAC"
+
+	ethtool --set-mm $tx verify-enabled off tx-enabled off
+	ethtool --set-mm $rx tx-enabled off
+
+	log_test "Manual configuration with verification: $tx to $rx"
+}
+
+manual_with_verification_h1_to_h2()
+{
+	manual_with_verification $h1 $h2
+}
+
+manual_with_verification_h2_to_h1()
+{
+	manual_with_verification $h2 $h1
+}
+
+manual_without_verification()
+{
+	local tx=$1; shift
+	local rx=$1; shift
+
+	RET=0
+
+	ethtool --set-mm $tx verify-enabled off tx-enabled on
+
+	ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+		grep -q 'DISABLED'
+	check_err "$?" "Verification is not disabled"
+
+	ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+	check_err "$?" "pMAC TX is not active"
+
+	traffic_test $tx "pmac"
+	check_err "$?" "Traffic did not get sent through $tx's pMAC"
+
+	ethtool --set-mm $tx verify-enabled off tx-enabled off
+
+	log_test "Manual configuration without verification: $tx to $rx"
+}
+
+manual_without_verification_h1_to_h2()
+{
+	manual_without_verification $h1 $h2
+}
+
+manual_without_verification_h2_to_h1()
+{
+	manual_without_verification $h2 $h1
+}
+
+manual_failed_verification()
+{
+	local tx=$1; shift
+	local rx=$1; shift
+
+	RET=0
+
+	ethtool --set-mm $rx pmac-enabled off
+	ethtool --set-mm $tx verify-enabled on tx-enabled on
+
+	# Wait for verification to time out
+	sleep 1
+
+	ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \
+		grep -q 'SUCCEEDED'
+	check_fail "$?" "Verification succeeded when it shouldn't have"
+
+	ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true'
+	check_fail "$?" "pMAC TX is active when it shouldn't have"
+
+	traffic_test $tx "emac"
+	check_err "$?" "Traffic did not get sent through $tx's eMAC"
+
+	ethtool --set-mm $tx verify-enabled off tx-enabled off
+	ethtool --set-mm $rx pmac-enabled on
+
+	log_test "Manual configuration with failed verification: $tx to $rx"
+}
+
+manual_failed_verification_h1_to_h2()
+{
+	manual_failed_verification $h1 $h2
+}
+
+manual_failed_verification_h2_to_h1()
+{
+	manual_failed_verification $h2 $h1
+}
+
+lldp_change_add_frag_size()
+{
+	local add_frag_size=$1
+
+	lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null
+	# Wait for TLVs to be received
+	sleep 2
+	lldptool -i $h2 -t -n -V addEthCaps | \
+		grep -q "Additional fragment size: $add_frag_size"
+}
+
+lldp()
+{
+	RET=0
+
+	systemctl start lldpad
+
+	# Configure the interfaces to receive and transmit LLDPDUs
+	lldptool -L -i $h1 adminStatus=rxtx >/dev/null
+	lldptool -L -i $h2 adminStatus=rxtx >/dev/null
+
+	# Enable the transmission of Additional Ethernet Capabilities TLV
+	lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null
+	lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null
+
+	# Wait for TLVs to be received
+	sleep 2
+
+	lldptool -i $h1 -t -n -V addEthCaps | \
+		grep -q "Preemption capability active"
+	check_err "$?" "$h1 pMAC TX is not active"
+
+	lldptool -i $h2 -t -n -V addEthCaps | \
+		grep -q "Preemption capability active"
+	check_err "$?" "$h2 pMAC TX is not active"
+
+	lldp_change_add_frag_size 3
+	check_err "$?" "addFragSize 3"
+
+	lldp_change_add_frag_size 2
+	check_err "$?" "addFragSize 2"
+
+	lldp_change_add_frag_size 1
+	check_err "$?" "addFragSize 1"
+
+	lldp_change_add_frag_size 0
+	check_err "$?" "addFragSize 0"
+
+	traffic_test $h1 "pmac"
+	check_err "$?" "Traffic did not get sent through $h1's pMAC"
+
+	traffic_test $h2 "pmac"
+	check_err "$?" "Traffic did not get sent through $h2's pMAC"
+
+	systemctl stop lldpad
+
+	log_test "LLDP"
+}
+
+h1_create()
+{
+	ip link set dev $h1 up
+
+	tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \
+		queues 1@0 1@1 1@2 1@3 \
+		fp P E E E \
+		hw 1
+
+	ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off
+}
+
+h2_create()
+{
+	ip link set dev $h2 up
+
+	ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off
+
+	tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \
+		queues 1@0 1@1 1@2 1@3 \
+		fp P E E E \
+		hw 1
+}
+
+h1_destroy()
+{
+	ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off
+
+	tc qdisc del dev $h1 root
+
+	ip link set dev $h1 down
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 root
+
+	ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off
+
+	ip link set dev $h2 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+}
+
+check_ethtool_mm_support
+check_tc_fp_support
+require_command lldptool
+bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually"
+
+for netif in ${NETIFS[@]}; do
+	ethtool --show-mm $netif 2>&1 &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: $netif does not support MAC Merge"
+		exit $ksft_skip
+	fi
+done
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/fib_offload_lib.sh b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
new file mode 100644
index 0000000000..1b3b462921
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
@@ -0,0 +1,873 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Various helpers and tests to verify FIB offload.
+
+__fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+	local ret
+
+	ip -n $ns -j -p -$family route show $route \
+		| jq -e '.[]["flags"] | contains(["trap"])' &> /dev/null
+	ret=$?
+	if [[ $should_fail == "true" ]]; then
+		if [[ $ret -ne 0 ]]; then
+			return 0
+		else
+			return 1
+		fi
+	fi
+
+	return $ret
+}
+
+fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	busywait 5000 __fib_trap_check $ns $family "$route" $should_fail
+}
+
+fib4_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 4 "$route" $should_fail
+}
+
+fib6_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 6 "$route" $should_fail
+}
+
+fib_ipv4_identical_routes_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 192.0.2.0/24 dev dummy2 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 tos 0 metric 1024" true
+	check_err $? "Appended route in hardware when should not"
+
+	ip -n $ns route prepend 192.0.2.0/24 dev dummy3 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy3 tos 0 metric 1024" false
+	check_err $? "Prepended route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Route was not replaced in hardware by prepended one"
+
+	log_test "IPv4 identical routes"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_tos_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 8 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 8 metric 1024" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Lowest TOS route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 4 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 4 metric 1024" true
+	check_err $? "Middle TOS route in hardware when should not"
+
+	log_test "IPv4 routes with TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1022
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1023
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv4 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replace_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1025
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_delete_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Insert multiple routes with the same prefix and length and varying
+	# metrics. Make sure that throughout delete operations the lowest
+	# metric route is the one in hardware.
+	for metric in $(seq 1024 1026); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1026
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Sole route not in hardware when should"
+
+	log_test "IPv4 route delete"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_plen_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Add two routes with the same key and different prefix length and
+	# make sure both are in hardware. It can be verified that both are
+	# sharing the same leaf by checking the /proc/net/fib_trie
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes with different prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_metric_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 routes replay - metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_tos_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 4
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 4" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0" true
+	check_err $? "Lowest TOS route in hardware when should not"
+
+	log_test "IPv4 routes replay - TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_plen_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes replay - prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_flush_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Exercise the routes flushing code paths by inserting various
+	# prefix routes on a netdev and then deleting it.
+	for metric in $(seq 1 20); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	ip -n $ns link del dev dummy1
+
+	log_test "IPv4 routes flushing"
+}
+
+fib_ipv6_add_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after appending route"
+
+	log_test "IPv6 single route add"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1022
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1023
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv6_append_single_test()
+{
+	local ns=$1; shift
+
+	# When an IPv6 multipath route is added without the 'nexthop' keyword,
+	# different code paths are taken compared to when the keyword is used.
+	# This test tries to verify the former.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append single route without 'nexthop' keyword"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_single_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1025
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1025
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 single route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1022 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1023 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 multipath routes with metric"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append multipath route with 'nexthop' keyword"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_multipath_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route replace 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 multipath route replace"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_to_single_test()
+{
+	local ns=$1; shift
+
+	# Test that when the first route in the leaf is not a multipath route
+	# and we try to append a multipath route with the same metric to it, it
+	# is not notified.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after append"
+
+	log_test "IPv6 append multipath route to non-multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_single_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where only a single route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a single route when it is the only route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	log_test "IPv6 delete sole single route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete single route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	# Test deletion of a single nexthop from a multipath route.
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting a single nexthop"
+
+	log_test "IPv6 delete single nexthop"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_multipath_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where an entire multipath route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a multipath route when it is the only route in the
+	# FIB node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	log_test "IPv6 delete sole multipath route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete multipath route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_single_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - single route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_multipath_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
new file mode 100644
index 0000000000..4a546509de
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -0,0 +1,51 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Topology description. p1 looped back to p2, p3 to p4 and so on.
+declare -A NETIFS
+
+NETIFS[p1]=veth0
+NETIFS[p2]=veth1
+NETIFS[p3]=veth2
+NETIFS[p4]=veth3
+NETIFS[p5]=veth4
+NETIFS[p6]=veth5
+NETIFS[p7]=veth6
+NETIFS[p8]=veth7
+NETIFS[p9]=veth8
+NETIFS[p10]=veth9
+
+# Port that does not have a cable connected.
+NETIF_NO_CABLE=eth8
+
+##############################################################################
+# Defines
+
+# IPv4 ping utility name
+PING=ping
+# IPv6 ping utility name. Some distributions use 'ping' for IPv6.
+PING6=ping6
+# Packet generator. Some distributions use 'mz'.
+MZ=mausezahn
+# Time to wait after interfaces participating in the test are all UP
+WAIT_TIME=5
+# Whether to pause on failure or not.
+PAUSE_ON_FAIL=no
+# Whether to pause on cleanup or not.
+PAUSE_ON_CLEANUP=no
+# Type of network interface to create
+NETIF_TYPE=veth
+# Whether to create virtual interfaces (veth) or not
+NETIF_CREATE=yes
+# Timeout (in seconds) before ping exits regardless of how many packets have
+# been sent or received
+PING_TIMEOUT=5
+# Minimum ageing_time (in centiseconds) supported by hardware
+LOW_AGEING_TIME=1000
+# Flag for tc match, supposed to be skip_sw/skip_hw which means do not process
+# filter by software/hardware
+TC_FLAG=skip_hw
+# IPv6 traceroute utility name.
+TROUTE6=traceroute6
+
diff --git a/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh
new file mode 100755
index 0000000000..0446db9c6f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_custom_multipath_hash.sh
@@ -0,0 +1,464 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test traffic distribution when there are multiple paths between an IPv4 GRE
+# tunnel. The tunnel carries IPv4 and IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +--------------------------------+
+# | H1                             |
+# |                     $h1 +      |
+# |   198.51.100.{2-253}/24 |      |
+# |   2001:db8:1::{2-fd}/64 |      |
+# +-------------------------|------+
+#                           |
+# +-------------------------|------------------+
+# | SW1                     |                  |
+# |                    $ol1 +                  |
+# |         198.51.100.1/24                    |
+# |        2001:db8:1::1/64                    |
+# |                                            |
+# |   + g1 (gre)                               |
+# |     loc=192.0.2.1                          |
+# |     rem=192.0.2.2 --.                      |
+# |     tos=inherit     |                      |
+# |                     v                      |
+# |                     + $ul1                 |
+# |                     | 192.0.2.17/28        |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# | SW2                 |                      |
+# |               $ul21 +                      |
+# |       192.0.2.18/28 |                      |
+# |                     |                      |
+# !   __________________+___                   |
+# |  /                      \                  |
+# |  |                      |                  |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan) |
+# |  | 192.0.2.33/28        | 192.0.2.49/28    |
+# |  |                      |                  |
+# +--|----------------------|------------------+
+#    |                      |
+# +--|----------------------|------------------+
+# |  |                      |                  |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan) |
+# |  | 192.0.2.34/28        | 192.0.2.50/28    |
+# |  |                      |                  |
+# |  \__________________+___/                  |
+# |                     |                      |
+# |                     |                      |
+# |               $ul31 +                      |
+# |       192.0.2.65/28 |                  SW3 |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# |                     + $ul4                 |
+# |                     ^ 192.0.2.66/28        |
+# |                     |                      |
+# |   + g2 (gre)        |                      |
+# |     loc=192.0.2.2   |                      |
+# |     rem=192.0.2.1 --'                      |
+# |     tos=inherit                            |
+# |                                            |
+# |                    $ol4 +                  |
+# |          203.0.113.1/24 |                  |
+# |        2001:db8:2::1/64 |              SW4 |
+# +-------------------------|------------------+
+#                           |
+# +-------------------------|------+
+# |                         |      |
+# |                     $h2 +      |
+# |    203.0.113.{2-253}/24        |
+# |   2001:db8:2::{2-fd}/64     H2 |
+# +--------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	custom_hash
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.2/24 2001:db8:1::2/64
+	ip route add vrf v$h1 default via 198.51.100.1 dev $h1
+	ip -6 route add vrf v$h1 default via 2001:db8:1::1 dev $h1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 default
+	ip route del vrf v$h1 default
+	simple_if_fini $h1 198.51.100.2/24 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 198.51.100.1/24 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 192.0.2.17/28
+
+	tunnel_create g1 gre 192.0.2.1 192.0.2.2 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 192.0.2.1/32
+	ip route add vrf v$ol1 192.0.2.2/32 via 192.0.2.18
+
+	ip route add vrf v$ol1 203.0.113.0/24 dev g1
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+	ip route del vrf v$ol1 203.0.113.0/24
+
+	ip route del vrf v$ol1 192.0.2.2/32
+	__simple_if_fini g1 192.0.2.1/32
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 192.0.2.17/28
+	simple_if_fini $ol1 198.51.100.1/24 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 192.0.2.18/28
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 192.0.2.33/28
+	vlan_create $ul22 222 v$ul21 192.0.2.49/28
+
+	ip route add vrf v$ul21 192.0.2.1/32 via 192.0.2.17
+	ip route add vrf v$ul21 192.0.2.2/32 \
+	   nexthop via 192.0.2.34 \
+	   nexthop via 192.0.2.50
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ul21 192.0.2.2/32
+	ip route del vrf v$ul21 192.0.2.1/32
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 192.0.2.18/28
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 192.0.2.65/28
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 192.0.2.34/28
+	vlan_create $ul32 222 v$ul31 192.0.2.50/28
+
+	ip route add vrf v$ul31 192.0.2.2/32 via 192.0.2.66
+	ip route add vrf v$ul31 192.0.2.1/32 \
+	   nexthop via 192.0.2.33 \
+	   nexthop via 192.0.2.49
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip route del vrf v$ul31 192.0.2.1/32
+	ip route del vrf v$ul31 192.0.2.2/32
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 192.0.2.65/28
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 203.0.113.1/24 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 192.0.2.66/28
+
+	tunnel_create g2 gre 192.0.2.2 192.0.2.1 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 192.0.2.2/32
+	ip route add vrf v$ol4 192.0.2.1/32 via 192.0.2.65
+
+	ip route add vrf v$ol4 198.51.100.0/24 dev g2
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+	ip route del vrf v$ol4 198.51.100.0/24
+
+	ip route del vrf v$ol4 192.0.2.1/32
+	__simple_if_fini g2 192.0.2.2/32
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 192.0.2.66/28
+	simple_if_fini $ol4 203.0.113.1/24 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 203.0.113.2/24 2001:db8:2::2/64
+	ip route add vrf v$h2 default via 203.0.113.1 dev $h2
+	ip -6 route add vrf v$h2 default via 2001:db8:2::1 dev $h2
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 default
+	ip route del vrf v$h2 default
+	simple_if_fini $h2 203.0.113.2/24 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 203.0.113.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+send_src_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A "198.51.100.2-198.51.100.253" -B 203.0.113.2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B "203.0.113.2-203.0.113.253" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_src_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+send_src_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A "2001:db8:1::2-2001:db8:1::fd" -B 2001:db8:2::2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B "2001:db8:2::2-2001:db8:2::fd" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_flowlabel()
+{
+	# Generate 16384 echo requests, each with a random flow label.
+	for _ in $(seq 1 16384); do
+		ip vrf exec v$h1 \
+			$PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1
+	done
+}
+
+send_src_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+custom_hash_test()
+{
+	local field="$1"; shift
+	local balanced="$1"; shift
+	local send_flows="$@"
+
+	RET=0
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	$send_flows
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+
+	local diff=$((d222 - d111))
+	local sum=$((d111 + d222))
+
+	local pct=$(echo "$diff / $sum * 100" | bc -l)
+	local is_balanced=$(echo "-20 <= $pct && $pct <= 20" | bc)
+
+	[[ ( $is_balanced -eq 1 && $balanced == "balanced" ) ||
+	   ( $is_balanced -eq 0 && $balanced == "unbalanced" ) ]]
+	check_err $? "Expected traffic to be $balanced, but it is not"
+
+	log_test "Multipath hash field: $field ($balanced)"
+	log_info "Packets sent on path1 / path2: $d111 / $d222"
+}
+
+custom_hash_v4()
+{
+	log_info "Running IPv4 overlay custom multipath hash tests"
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv4.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0040
+	custom_hash_test "Inner source IP" "balanced" send_src_ipv4
+	custom_hash_test "Inner source IP" "unbalanced" send_dst_ipv4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0080
+	custom_hash_test "Inner destination IP" "balanced" send_dst_ipv4
+	custom_hash_test "Inner destination IP" "unbalanced" send_src_ipv4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0400
+	custom_hash_test "Inner source port" "balanced" send_src_udp4
+	custom_hash_test "Inner source port" "unbalanced" send_dst_udp4
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0800
+	custom_hash_test "Inner destination port" "balanced" send_dst_udp4
+	custom_hash_test "Inner destination port" "unbalanced" send_src_udp4
+
+	sysctl_restore net.ipv4.neigh.default.gc_thresh3
+	sysctl_restore net.ipv4.neigh.default.gc_thresh2
+	sysctl_restore net.ipv4.neigh.default.gc_thresh1
+}
+
+custom_hash_v6()
+{
+	log_info "Running IPv6 overlay custom multipath hash tests"
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv6.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0040
+	custom_hash_test "Inner source IP" "balanced" send_src_ipv6
+	custom_hash_test "Inner source IP" "unbalanced" send_dst_ipv6
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0080
+	custom_hash_test "Inner destination IP" "balanced" send_dst_ipv6
+	custom_hash_test "Inner destination IP" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0200
+	custom_hash_test "Inner flowlabel" "balanced" send_flowlabel
+	custom_hash_test "Inner flowlabel" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0400
+	custom_hash_test "Inner source port" "balanced" send_src_udp6
+	custom_hash_test "Inner source port" "unbalanced" send_dst_udp6
+
+	sysctl_set net.ipv4.fib_multipath_hash_fields 0x0800
+	custom_hash_test "Inner destination port" "balanced" send_dst_udp6
+	custom_hash_test "Inner destination port" "unbalanced" send_src_udp6
+
+	sysctl_restore net.ipv6.neigh.default.gc_thresh3
+	sysctl_restore net.ipv6.neigh.default.gc_thresh2
+	sysctl_restore net.ipv6.neigh.default.gc_thresh1
+}
+
+custom_hash()
+{
+	# Test that when the hash policy is set to custom, traffic is
+	# distributed only according to the fields set in the
+	# fib_multipath_hash_fields sysctl.
+	#
+	# Each time set a different field and make sure traffic is only
+	# distributed when the field is changed in the packet stream.
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 3
+
+	custom_hash_v4
+	custom_hash_v6
+
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh b/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh
new file mode 100755
index 0000000000..e4009f6580
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh
@@ -0,0 +1,305 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv4
+# GRE tunnel. The tunnel carries IPv4 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# | 192.0.3.{2-62}/24 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.3.1/24                          |
+# |                                            |
+# |  + g1 (gre)                                |
+# |    loc=192.0.2.65                          |
+# |    rem=192.0.2.66 --.                      |
+# |    tos=inherit      |                      |
+# |                     v                      |
+# |                     + $ul1                 |
+# |                     | 192.0.2.129/28       |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# | SW2                 |                      |
+# |               $ul21 +                      |
+# |      192.0.2.130/28                        |
+# |                   |                        |
+# !   ________________|_____                   |
+# |  /                      \                  |
+# |  |                      |                  |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan) |
+# |  | 192.0.2.145/28       | 192.0.2.161/28   |
+# |  |                      |                  |
+# +--|----------------------|------------------+
+#    |                      |
+# +--|----------------------|------------------+
+# |  |                      |                  |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan) |
+# |  | 192.0.2.146/28       | 192.0.2.162/28   |
+# |  |                      |                  |
+# |  \______________________/                  |
+# |                   |                        |
+# |                   |                        |
+# |               $ul31 +                      |
+# |      192.0.2.177/28 |                  SW3 |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# |                     + $ul4                 |
+# |                     ^ 192.0.2.178/28       |
+# |                     |                      |
+# |  + g2 (gre)         |                      |
+# |    loc=192.0.2.66   |                      |
+# |    rem=192.0.2.65 --'                      |
+# |    tos=inherit                             |
+# |                                            |
+# |               $ol4 +                       |
+# |       192.0.4.1/24 |                   SW4 |
+# +--------------------|-----------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |  192.0.4.{2-62}/24        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.3.2/24
+	ip route add vrf v$h1 192.0.4.0/24 via 192.0.3.1
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.4.0/24 via 192.0.3.1
+	simple_if_fini $h1 192.0.3.2/24
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.3.1/24
+	__simple_if_init $ul1 v$ol1 192.0.2.129/28
+
+	tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	ip route add vrf v$ol1 192.0.4.0/24 nexthop dev g1
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.4.0/24
+
+	ip route del vrf v$ol1 192.0.2.66/32
+	__simple_if_fini g1 192.0.2.65/32
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 192.0.2.129/28
+	simple_if_fini $ol1 192.0.3.1/24
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 192.0.2.130/28
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 192.0.2.145/28
+	vlan_create $ul22 222 v$ul21 192.0.2.161/28
+
+	ip route add vrf v$ul21 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ul21 192.0.2.66/32
+	ip route del vrf v$ul21 192.0.2.65/32
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 192.0.2.130/28
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 192.0.2.177/28
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 192.0.2.146/28
+	vlan_create $ul32 222 v$ul31 192.0.2.162/28
+
+	ip route add vrf v$ul31 192.0.2.66/32 via 192.0.2.178
+	ip route add vrf v$ul31 192.0.2.65/32 \
+	   nexthop via 192.0.2.145 \
+	   nexthop via 192.0.2.161
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip route del vrf v$ul31 192.0.2.65/32
+	ip route del vrf v$ul31 192.0.2.66/32
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 192.0.2.177/28
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 192.0.4.1/24
+	__simple_if_init $ul4 v$ol4 192.0.2.178/28
+
+	tunnel_create g2 gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 192.0.2.66/32
+	ip route add vrf v$ol4 192.0.2.65/32 via 192.0.2.177
+
+	ip route add vrf v$ol4 192.0.3.0/24 nexthop dev g2
+}
+
+sw4_destroy()
+{
+	ip route del vrf v$ol4 192.0.3.0/24
+
+	ip route del vrf v$ol4 192.0.2.65/32
+	__simple_if_fini g2 192.0.2.66/32
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 192.0.2.178/28
+	simple_if_fini $ol4 192.0.4.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.4.2/24
+	ip route add vrf v$h2 192.0.3.0/24 via 192.0.4.1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.3.0/24 via 192.0.4.1
+	simple_if_fini $h2 192.0.4.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 weight $weight1 \
+	   nexthop via 192.0.2.162 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A "192.0.3.2-192.0.3.62" -B "192.0.4.2-192.0.4.62" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.4.2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 over GRE over IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh b/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh
new file mode 100755
index 0000000000..e449475c4d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh
@@ -0,0 +1,306 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv4
+# GRE tunnel. The tunnel carries IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |  2001:db8:1::1/64                          |
+# |                                            |
+# |  + g1 (gre)                                |
+# |    loc=192.0.2.65                          |
+# |    rem=192.0.2.66 --.                      |
+# |    tos=inherit      |                      |
+# |                     v                      |
+# |                     + $ul1                 |
+# |                     | 192.0.2.129/28       |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# | SW2                 |                      |
+# |               $ul21 +                      |
+# |      192.0.2.130/28                        |
+# |                   |                        |
+# !   ________________|_____                   |
+# |  /                      \                  |
+# |  |                      |                  |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan) |
+# |  | 192.0.2.145/28       | 192.0.2.161/28   |
+# |  |                      |                  |
+# +--|----------------------|------------------+
+#    |                      |
+# +--|----------------------|------------------+
+# |  |                      |                  |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan) |
+# |  | 192.0.2.146/28       | 192.0.2.162/28   |
+# |  |                      |                  |
+# |  \______________________/                  |
+# |                   |                        |
+# |                   |                        |
+# |               $ul31 +                      |
+# |      192.0.2.177/28 |                  SW3 |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# |                     + $ul4                 |
+# |                     ^ 192.0.2.178/28       |
+# |                     |                      |
+# |  + g2 (gre)         |                      |
+# |    loc=192.0.2.66   |                      |
+# |    rem=192.0.2.65 --'                      |
+# |    tos=inherit                             |
+# |                                            |
+# |               $ol4 +                       |
+# |   2001:db8:2::1/64 |                   SW4 |
+# +--------------------|-----------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |   2001:db8:2::2/64        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+	multipath_ipv6
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::2/64
+	ip -6 route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+	simple_if_fini $h1 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 192.0.2.129/28
+
+	tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+
+	ip route del vrf v$ol1 192.0.2.66/32
+	__simple_if_fini g1 192.0.2.65/32
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 192.0.2.129/28
+	simple_if_fini $ol1 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 192.0.2.130/28
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 192.0.2.145/28
+	vlan_create $ul22 222 v$ul21 192.0.2.161/28
+
+	ip route add vrf v$ul21 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ul21 192.0.2.66/32
+	ip route del vrf v$ul21 192.0.2.65/32
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 192.0.2.130/28
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 192.0.2.177/28
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 192.0.2.146/28
+	vlan_create $ul32 222 v$ul31 192.0.2.162/28
+
+	ip route add vrf v$ul31 192.0.2.66/32 via 192.0.2.178
+	ip route add vrf v$ul31 192.0.2.65/32 \
+	   nexthop via 192.0.2.145 \
+	   nexthop via 192.0.2.161
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip route del vrf v$ul31 192.0.2.65/32
+	ip route del vrf v$ul31 192.0.2.66/32
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 192.0.2.177/28
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 192.0.2.178/28
+
+	tunnel_create g2 gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 192.0.2.66/32
+	ip route add vrf v$ol4 192.0.2.65/32 via 192.0.2.177
+
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+
+	ip route del vrf v$ol4 192.0.2.65/32
+	__simple_if_fini g2 192.0.2.66/32
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 192.0.2.178/28
+	simple_if_fini $ol4 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:2::2/64
+	ip -6 route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	simple_if_fini $h2 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 weight $weight1 \
+	   nexthop via 192.0.2.162 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -6 -q -p 64 -A "2001:db8:1::2-2001:db8:1::1e" \
+	       -B "2001:db8:2::2-2001:db8:2::1e" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv6()
+{
+	ping_test $h1 2001:db8:2::2
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 over GRE over IPv4 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 0000000000..a8d8e8b3dc
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,257 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.2.2/28                          |
+# |                                            |
+# |  + g1a (gre)          + g1b (gre)          |
+# |    loc=192.0.2.65       loc=192.0.2.81     |
+# |    rem=192.0.2.66 --.   rem=192.0.2.82 --. |
+# |    tos=inherit      |   tos=inherit      | |
+# |  .------------------'                    | |
+# |  |                    .------------------' |
+# |  v                    v                    |
+# |  + $ul1.111 (vlan)    + $ul1.222 (vlan)    |
+# |  | 192.0.2.129/28     | 192.0.2.145/28     |
+# |   \                  /                     |
+# |    \________________/                      |
+# |            |                               |
+# |            + $ul1                          |
+# +------------|-------------------------------+
+#              |
+# +------------|-------------------------------+
+# | SW2        + $ul2                          |
+# |     _______|________                       |
+# |    /                \                      |
+# |   /                  \                     |
+# |  + $ul2.111 (vlan)    + $ul2.222 (vlan)    |
+# |  ^ 192.0.2.130/28     ^ 192.0.2.146/28     |
+# |  |                    |                    |
+# |  |                    '------------------. |
+# |  '------------------.                    | |
+# |  + g2a (gre)        | + g2b (gre)        | |
+# |    loc=192.0.2.66   |   loc=192.0.2.82   | |
+# |    rem=192.0.2.65 --'   rem=192.0.2.81 --' |
+# |    tos=inherit          tos=inherit        |
+# |                                            |
+# |              $ol2 +                        |
+# |     192.0.2.17/28 |                        |
+# +-------------------|------------------------+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# +-------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.2.2/28
+	__simple_if_init $ul1 v$ol1
+	vlan_create $ul1 111 v$ol1 192.0.2.129/28
+	vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+	tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1a v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+	__simple_if_init g1b v$ol1 192.0.2.81/32
+	ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+	ip route add vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.2.16/28
+
+	ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+	__simple_if_fini g1b 192.0.2.81/32
+	tunnel_destroy g1b
+
+	ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 222
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_create()
+{
+	simple_if_init $ol2 192.0.2.17/28
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+	vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+	tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+	tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+	__simple_if_init g2b v$ol2 192.0.2.82/32
+	ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+	ip route add vrf v$ol2 192.0.2.0/28 \
+	   nexthop dev g2a \
+	   nexthop dev g2b
+
+	tc qdisc add dev $ul2 clsact
+	tc filter add dev $ul2 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul2 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw2_destroy()
+{
+	tc qdisc del dev $ul2 clsact
+
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+	__simple_if_fini g2b 192.0.2.82/32
+	tunnel_destroy g2b
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 222
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a weight $weight1 \
+	   nexthop dev g1b weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh b/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh
new file mode 100755
index 0000000000..d03aa2cab9
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath_nh.sh
@@ -0,0 +1,356 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# |  2001:db8:1::1/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.2.2/28                          |
+# |  2001:db8:1::2/64                          |
+# |                                            |
+# |  + g1a (gre)          + g1b (gre)          |
+# |    loc=192.0.2.65       loc=192.0.2.81     |
+# |    rem=192.0.2.66 --.   rem=192.0.2.82 --. |
+# |    tos=inherit      |   tos=inherit      | |
+# |  .------------------'                    | |
+# |  |                    .------------------' |
+# |  v                    v                    |
+# |  + $ul1.111 (vlan)    + $ul1.222 (vlan)    |
+# |  | 192.0.2.129/28     | 192.0.2.145/28     |
+# |   \                  /                     |
+# |    \________________/                      |
+# |            |                               |
+# |            + $ul1                          |
+# +------------|-------------------------------+
+#              |
+# +------------|-------------------------------+
+# | SW2        + $ul2                          |
+# |     _______|________                       |
+# |    /                \                      |
+# |   /                  \                     |
+# |  + $ul2.111 (vlan)    + $ul2.222 (vlan)    |
+# |  ^ 192.0.2.130/28     ^ 192.0.2.146/28     |
+# |  |                    |                    |
+# |  |                    '------------------. |
+# |  '------------------.                    | |
+# |  + g2a (gre)        | + g2b (gre)        | |
+# |    loc=192.0.2.66   |   loc=192.0.2.82   | |
+# |    rem=192.0.2.65 --'   rem=192.0.2.81 --' |
+# |    tos=inherit          tos=inherit        |
+# |                                            |
+# |              $ol2 +                        |
+# |     192.0.2.17/28 |                        |
+# |  2001:db8:2::1/64 |                        |
+# +-------------------|------------------------+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# |  2001:db8:2::2/64       |
+# +-------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	multipath_ipv4
+	multipath_ipv6
+	multipath_ipv6_l4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	ip route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.2.2/28 2001:db8:1::2/64
+	__simple_if_init $ul1 v$ol1
+	vlan_create $ul1 111 v$ol1 192.0.2.129/28
+	vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+	tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1a v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+	__simple_if_init g1b v$ol1 192.0.2.81/32
+	ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+	ip -6 nexthop add id 101 dev g1a
+	ip -6 nexthop add id 102 dev g1b
+	ip nexthop add id 103 group 101/102
+
+	ip route add vrf v$ol1 192.0.2.16/28 nhid 103
+	ip route add vrf v$ol1 2001:db8:2::/64 nhid 103
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 2001:db8:2::/64
+	ip route del vrf v$ol1 192.0.2.16/28
+
+	ip nexthop del id 103
+	ip -6 nexthop del id 102
+	ip -6 nexthop del id 101
+
+	ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+	__simple_if_fini g1b 192.0.2.81/32
+	tunnel_destroy g1b
+
+	ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 222
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28 2001:db8:1::2/64
+}
+
+sw2_create()
+{
+	simple_if_init $ol2 192.0.2.17/28 2001:db8:2::1/64
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+	vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+	tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+	tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+	__simple_if_init g2b v$ol2 192.0.2.82/32
+	ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+	ip -6 nexthop add id 201 dev g2a
+	ip -6 nexthop add id 202 dev g2b
+	ip nexthop add id 203 group 201/202
+
+	ip route add vrf v$ol2 192.0.2.0/28 nhid 203
+	ip route add vrf v$ol2 2001:db8:1::/64 nhid 203
+
+	tc qdisc add dev $ul2 clsact
+	tc filter add dev $ul2 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul2 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw2_destroy()
+{
+	tc qdisc del dev $ul2 clsact
+
+	ip route del vrf v$ol2 2001:db8:1::/64
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip nexthop del id 203
+	ip -6 nexthop del id 202
+	ip -6 nexthop del id 201
+
+	ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+	__simple_if_fini g2b 192.0.2.82/32
+	tunnel_destroy g2b
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 222
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28 2001:db8:2::2/64
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	ip route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 0
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	# Generate 16384 echo requests, each with a random flow label.
+	for ((i=0; i < 16384; ++i)); do
+		ip vrf exec v$h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+	done
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+		$MZ $h1 -6 -q -p 64 -A 2001:db8:1::1 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6_l4()
+{
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh b/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh
new file mode 100755
index 0000000000..088b65e64d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath_nh_res.sh
@@ -0,0 +1,361 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# |  2001:db8:1::1/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.2.2/28                          |
+# |  2001:db8:1::2/64                          |
+# |                                            |
+# |  + g1a (gre)          + g1b (gre)          |
+# |    loc=192.0.2.65       loc=192.0.2.81     |
+# |    rem=192.0.2.66 --.   rem=192.0.2.82 --. |
+# |    tos=inherit      |   tos=inherit      | |
+# |  .------------------'                    | |
+# |  |                    .------------------' |
+# |  v                    v                    |
+# |  + $ul1.111 (vlan)    + $ul1.222 (vlan)    |
+# |  | 192.0.2.129/28     | 192.0.2.145/28     |
+# |   \                  /                     |
+# |    \________________/                      |
+# |            |                               |
+# |            + $ul1                          |
+# +------------|-------------------------------+
+#              |
+# +------------|-------------------------------+
+# | SW2        + $ul2                          |
+# |     _______|________                       |
+# |    /                \                      |
+# |   /                  \                     |
+# |  + $ul2.111 (vlan)    + $ul2.222 (vlan)    |
+# |  ^ 192.0.2.130/28     ^ 192.0.2.146/28     |
+# |  |                    |                    |
+# |  |                    '------------------. |
+# |  '------------------.                    | |
+# |  + g2a (gre)        | + g2b (gre)        | |
+# |    loc=192.0.2.66   |   loc=192.0.2.82   | |
+# |    rem=192.0.2.65 --'   rem=192.0.2.81 --' |
+# |    tos=inherit          tos=inherit        |
+# |                                            |
+# |              $ol2 +                        |
+# |     192.0.2.17/28 |                        |
+# |  2001:db8:2::1/64 |                        |
+# +-------------------|------------------------+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# |  2001:db8:2::2/64       |
+# +-------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	multipath_ipv4
+	multipath_ipv6
+	multipath_ipv6_l4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	ip route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.2.2/28 2001:db8:1::2/64
+	__simple_if_init $ul1 v$ol1
+	vlan_create $ul1 111 v$ol1 192.0.2.129/28
+	vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+	tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1a v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+	__simple_if_init g1b v$ol1 192.0.2.81/32
+	ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+	ip -6 nexthop add id 101 dev g1a
+	ip -6 nexthop add id 102 dev g1b
+	ip nexthop add id 103 group 101/102 type resilient buckets 512 \
+		idle_timer 0
+
+	ip route add vrf v$ol1 192.0.2.16/28 nhid 103
+	ip route add vrf v$ol1 2001:db8:2::/64 nhid 103
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 2001:db8:2::/64
+	ip route del vrf v$ol1 192.0.2.16/28
+
+	ip nexthop del id 103
+	ip -6 nexthop del id 102
+	ip -6 nexthop del id 101
+
+	ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+	__simple_if_fini g1b 192.0.2.81/32
+	tunnel_destroy g1b
+
+	ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 222
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28 2001:db8:1::2/64
+}
+
+sw2_create()
+{
+	simple_if_init $ol2 192.0.2.17/28 2001:db8:2::1/64
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+	vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+	tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+	tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+	__simple_if_init g2b v$ol2 192.0.2.82/32
+	ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+	ip -6 nexthop add id 201 dev g2a
+	ip -6 nexthop add id 202 dev g2b
+	ip nexthop add id 203 group 201/202 type resilient buckets 512 \
+		idle_timer 0
+
+	ip route add vrf v$ol2 192.0.2.0/28 nhid 203
+	ip route add vrf v$ol2 2001:db8:1::/64 nhid 203
+
+	tc qdisc add dev $ul2 clsact
+	tc filter add dev $ul2 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul2 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw2_destroy()
+{
+	tc qdisc del dev $ul2 clsact
+
+	ip route del vrf v$ol2 2001:db8:1::/64
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip nexthop del id 203
+	ip -6 nexthop del id 202
+	ip -6 nexthop del id 201
+
+	ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+	__simple_if_fini g2b 192.0.2.82/32
+	tunnel_destroy g2b
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 222
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28 2001:db8:2::2/64
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	ip route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2 \
+		type resilient
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102 type resilient
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 0
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2 \
+		type resilient
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	# Generate 16384 echo requests, each with a random flow label.
+	for ((i=0; i < 16384; ++i)); do
+		ip vrf exec v$h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+	done
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102 type resilient
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight1/102,$weight2 \
+		type resilient
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+		$MZ $h1 -6 -q -p 64 -A 2001:db8:1::1 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip nexthop replace id 103 group 101/102 type resilient
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+multipath_ipv6_l4()
+{
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
new file mode 100755
index 0000000000..48584a5138
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh
@@ -0,0 +1,340 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                     +----------------------+
+# | H1                 |                     |                   H2 |
+# |                    |                     |                      |
+# |          $h1.200 + |                     | + $h2.200            |
+# |     192.0.2.1/28 | |                     | | 192.0.2.18/28      |
+# | 2001:db8:1::1/64 | |                     | | 2001:db8:2::1/64   |
+# |                  | |                     | |                    |
+# |              $h1 + |                     | + $h2                |
+# |                  | |                     | |                    |
+# +------------------|-+                     +-|--------------------+
+#                    |                         |
+# +------------------|-------------------------|--------------------+
+# | SW               |                         |                    |
+# |                  |                         |                    |
+# |             $rp1 +                         + $rp2               |
+# |                  |                         |                    |
+# |         $rp1.200 +                         + $rp2.200           |
+# |     192.0.2.2/28                             192.0.2.17/28      |
+# | 2001:db8:1::2/64                             2001:db8:2::2/64   |
+# |                                                                 |
+# +-----------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	respin_enablement
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	reapply_config
+	ping_ipv4
+	ping_ipv6
+	test_stats_rx_ipv4
+	test_stats_tx_ipv4
+	test_stats_rx_ipv6
+	test_stats_tx_ipv6
+	test_stats_report_rx
+	test_stats_report_tx
+	test_destroy_enabled
+	test_double_enable
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 200 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+	ip route del 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+	vlan_destroy $h1 200
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 200 v$h2 192.0.2.18/28 2001:db8:2::1/64
+	ip route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::2
+	ip route del 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+	vlan_destroy $h2 200
+	simple_if_fini $h2
+}
+
+router_rp1_200_create()
+{
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
+	ip address add dev $rp1.200 192.0.2.2/28
+	ip address add dev $rp1.200 2001:db8:1::2/64
+	ip stats set dev $rp1.200 l3_stats on
+}
+
+router_rp1_200_destroy()
+{
+	ip stats set dev $rp1.200 l3_stats off
+	ip address del dev $rp1.200 2001:db8:1::2/64
+	ip address del dev $rp1.200 192.0.2.2/28
+	ip link del dev $rp1.200
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	router_rp1_200_create
+
+	ip link set dev $rp2 up
+	vlan_create $rp2 200 "" 192.0.2.17/28 2001:db8:2::2/64
+}
+
+router_destroy()
+{
+	vlan_destroy $rp2 200
+	ip link set dev $rp2 down
+
+	router_rp1_200_destroy
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1mac=$(mac_get $rp1)
+	rp2mac=$(mac_get $rp2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.200 192.0.2.18 " IPv4"
+}
+
+ping_ipv6()
+{
+	ping_test $h1.200 2001:db8:2::1 " IPv6"
+}
+
+send_packets_rx_ipv4()
+{
+	# Send 21 packets instead of 20, because the first one might trap and go
+	# through the SW datapath, which might not bump the HW counter.
+	$MZ $h1.200 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp1mac -A 192.0.2.1 -B 192.0.2.18 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_rx_ipv6()
+{
+	$MZ $h1.200 -6 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp1mac -A 2001:db8:1::1 -B 2001:db8:2::1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv4()
+{
+	$MZ $h2.200 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp2mac -A 192.0.2.18 -B 192.0.2.1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+send_packets_tx_ipv6()
+{
+	$MZ $h2.200 -6 -c 21 -d 20msec -p 100 \
+	    -a own -b $rp2mac -A 2001:db8:2::1 -B 2001:db8:1::1 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+___test_stats()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	local a
+	local b
+
+	a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
+	send_packets_${dir}_${prot}
+	"$@"
+	b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+		       hw_stats_get l3_stats $rp1.200 ${dir} packets)
+	check_err $? "Traffic not reflected in the counter: $a -> $b"
+}
+
+__test_stats()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	RET=0
+	___test_stats "$dir" "$prot"
+	log_test "Test $dir packets: $prot"
+}
+
+test_stats_rx_ipv4()
+{
+	__test_stats rx ipv4
+}
+
+test_stats_tx_ipv4()
+{
+	__test_stats tx ipv4
+}
+
+test_stats_rx_ipv6()
+{
+	__test_stats rx ipv6
+}
+
+test_stats_tx_ipv6()
+{
+	__test_stats tx ipv6
+}
+
+# Make sure everything works well even after stats have been disabled and
+# reenabled on the same device without touching the L3 configuration.
+respin_enablement()
+{
+	log_info "Turning stats off and on again"
+	ip stats set dev $rp1.200 l3_stats off
+	ip stats set dev $rp1.200 l3_stats on
+}
+
+# For the initial run, l3_stats is enabled on a completely set up netdevice. Now
+# do it the other way around: enabling the L3 stats on an L2 netdevice, and only
+# then apply the L3 configuration.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	router_rp1_200_destroy
+
+	ip link add name $rp1.200 link $rp1 type vlan id 200
+	ip link set dev $rp1.200 addrgenmode none
+	ip stats set dev $rp1.200 l3_stats on
+	ip link set dev $rp1.200 addrgenmode eui64
+	ip link set dev $rp1.200 up
+	ip address add dev $rp1.200 192.0.2.2/28
+	ip address add dev $rp1.200 2001:db8:1::2/64
+}
+
+__test_stats_report()
+{
+	local dir=$1; shift
+	local prot=$1; shift
+
+	local a
+	local b
+
+	RET=0
+
+	a=$(hw_stats_get l3_stats $rp1.200 ${dir} packets)
+	send_packets_${dir}_${prot}
+	ip address flush dev $rp1.200
+	b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+		       hw_stats_get l3_stats $rp1.200 ${dir} packets)
+	check_err $? "Traffic not reflected in the counter: $a -> $b"
+	log_test "Test ${dir} packets: stats pushed on loss of L3"
+
+	ip stats set dev $rp1.200 l3_stats off
+	ip link del dev $rp1.200
+	router_rp1_200_create
+}
+
+test_stats_report_rx()
+{
+	__test_stats_report rx ipv4
+}
+
+test_stats_report_tx()
+{
+	__test_stats_report tx ipv4
+}
+
+test_destroy_enabled()
+{
+	RET=0
+
+	ip link del dev $rp1.200
+	router_rp1_200_create
+
+	log_test "Destroy l3_stats-enabled netdev"
+}
+
+test_double_enable()
+{
+	RET=0
+	___test_stats rx ipv4 \
+		ip stats set dev $rp1.200 l3_stats on
+	log_test "Test stat retention across a spurious enablement"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info |
+	   jq '.[].info.l3_stats.used')
+kind=$(ip -j -d link show dev $rp1 |
+	   jq -r '.[].linkinfo.info_kind')
+if [[ $used != true ]]; then
+	if [[ $kind == veth ]]; then
+		log_test_skip "l3_stats not offloaded on veth interface"
+		EXIT_STATUS=$ksft_skip
+	else
+		RET=1 log_test "l3_stats not offloaded"
+	fi
+else
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh
new file mode 100755
index 0000000000..7594bbb490
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/hw_stats_l3_gre.sh
@@ -0,0 +1,111 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test L3 stats on IP-in-IP GRE tunnel without key.
+
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="
+	ping_ipv4
+	test_stats_rx
+	test_stats_tx
+"
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	ol1mac=$(mac_get $ol1)
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1
+	sw2_flat_create gre $ol2 $ul2
+	ip stats set dev g1a l3_stats on
+	ip stats set dev g2a l3_stats on
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip stats set dev g1a l3_stats off
+	ip stats set dev g2a l3_stats off
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+	forwarding_restore
+}
+
+ping_ipv4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat"
+}
+
+send_packets_ipv4()
+{
+	# Send 21 packets instead of 20, because the first one might trap and go
+	# through the SW datapath, which might not bump the HW counter.
+	$MZ $h1 -c 21 -d 20msec -p 100 \
+	    -a own -b $ol1mac -A 192.0.2.1 -B 192.0.2.18 \
+	    -q -t udp sp=54321,dp=12345
+}
+
+test_stats()
+{
+	local dev=$1; shift
+	local dir=$1; shift
+
+	local a
+	local b
+
+	RET=0
+
+	a=$(hw_stats_get l3_stats $dev $dir packets)
+	send_packets_ipv4
+	b=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $a + 20" \
+		     hw_stats_get l3_stats $dev $dir packets)
+	check_err $? "Traffic not reflected in the counter: $a -> $b"
+
+	log_test "Test $dir packets: $prot"
+}
+
+test_stats_tx()
+{
+	test_stats g1a tx
+}
+
+test_stats_rx()
+{
+	test_stats g2a rx
+}
+
+skip_on_veth
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
new file mode 100755
index 0000000000..49fa94b53a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
@@ -0,0 +1,174 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test ipv6 stats on the incoming if when forwarding with VRF
+
+ALL_TESTS="
+	ipv6_ping
+	ipv6_in_too_big_err
+	ipv6_in_hdr_err
+	ipv6_in_addr_err
+	ipv6_in_discard
+"
+
+NUM_NETIFS=4
+source lib.sh
+
+require_command $TROUTE6
+
+h1_create()
+{
+	simple_if_init $h1 2001:1:1::2/64
+	ip -6 route add vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+	simple_if_fini $h1 2001:1:1::2/64
+}
+
+router_create()
+{
+	vrf_create router
+	__simple_if_init $rtr1 router 2001:1:1::1/64
+	__simple_if_init $rtr2 router 2001:1:2::1/64
+	mtu_set $rtr2 1280
+}
+
+router_destroy()
+{
+	mtu_restore $rtr2
+	__simple_if_fini $rtr2 2001:1:2::1/64
+	__simple_if_fini $rtr1 2001:1:1::1/64
+	vrf_destroy router
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:1:2::2/64
+	ip -6 route add vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	mtu_set $h2 1280
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	ip -6 route del vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	simple_if_fini $h2 2001:1:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rtr1=${NETIFS[p2]}
+
+	rtr2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	router_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	router_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ipv6_in_too_big_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send too big packets
+	ip vrf exec $vrf_name \
+		$PING6 -s 1300 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InTooBigErrors"
+}
+
+ipv6_in_hdr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send packets with hop limit 1, easiest with traceroute6 as some ping6
+	# doesn't allow hop limit to be specified
+	ip vrf exec $vrf_name \
+		$TROUTE6 2001:1:2::2 &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InHdrErrors"
+}
+
+ipv6_in_addr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Disable forwarding temporary while sending the packet
+	sysctl -qw net.ipv6.conf.all.forwarding=0
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	sysctl -qw net.ipv6.conf.all.forwarding=1
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InAddrErrors"
+}
+
+ipv6_in_discard()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	local vrf_name=$(master_name_get $h1)
+
+	# Add a policy to discard
+	ip xfrm policy add dst 2001:1:2::2/128 dir fwd action block
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	ip xfrm policy del dst 2001:1:2::2/128 dir fwd
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InDiscards"
+}
+ipv6_ping()
+{
+	RET=0
+
+	ping6_test $h1 2001:1:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh b/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh
new file mode 100755
index 0000000000..d40183b4ec
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_custom_multipath_hash.sh
@@ -0,0 +1,466 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test traffic distribution when there are multiple paths between an IPv6 GRE
+# tunnel. The tunnel carries IPv4 and IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +--------------------------------+
+# | H1                             |
+# |                     $h1 +      |
+# |   198.51.100.{2-253}/24 |      |
+# |   2001:db8:1::{2-fd}/64 |      |
+# +-------------------------|------+
+#                           |
+# +-------------------------|-------------------+
+# | SW1                     |                   |
+# |                    $ol1 +                   |
+# |         198.51.100.1/24                     |
+# |        2001:db8:1::1/64                     |
+# |                                             |
+# |+ g1 (ip6gre)                                |
+# |  loc=2001:db8:3::1                          |
+# |  rem=2001:db8:3::2 -.                       |
+# |     tos=inherit     |                       |
+# |                     v                       |
+# |                     + $ul1                  |
+# |                     | 2001:db8:10::1/64     |
+# +---------------------|-----------------------+
+#                       |
+# +---------------------|-----------------------+
+# | SW2                 |                       |
+# |               $ul21 +                       |
+# |   2001:db8:10::2/64 |                       |
+# |                     |                       |
+# !   __________________+___                    |
+# |  /                      \                   |
+# |  |                      |                   |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan)  |
+# |  | 2001:db8:11::1/64    | 2001:db8:12::1/64 |
+# |  |                      |                   |
+# +--|----------------------|-------------------+
+#    |                      |
+# +--|----------------------|-------------------+
+# |  |                      |                   |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan)  |
+# |  | 2001:db8:11::2/64    | 2001:db8:12::2/64 |
+# |  |                      |                   |
+# |  \__________________+___/                   |
+# |                     |                       |
+# |                     |                       |
+# |               $ul31 +                       |
+# |   2001:db8:13::1/64 |                   SW3 |
+# +---------------------|-----------------------+
+#                       |
+# +---------------------|-----------------------+
+# |                     + $ul4                  |
+# |                     ^ 2001:db8:13::2/64     |
+# |                     |                       |
+# |+ g2 (ip6gre)        |                       |
+# |  loc=2001:db8:3::2  |                       |
+# |  rem=2001:db8:3::1 -'                       |
+# |  tos=inherit                                |
+# |                                             |
+# |                    $ol4 +                   |
+# |          203.0.113.1/24 |                   |
+# |        2001:db8:2::1/64 |               SW4 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|------+
+# |                         |      |
+# |                     $h2 +      |
+# |    203.0.113.{2-253}/24        |
+# |   2001:db8:2::{2-fd}/64     H2 |
+# +--------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	custom_hash
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.2/24 2001:db8:1::2/64
+	ip route add vrf v$h1 default via 198.51.100.1 dev $h1
+	ip -6 route add vrf v$h1 default via 2001:db8:1::1 dev $h1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 default
+	ip route del vrf v$h1 default
+	simple_if_fini $h1 198.51.100.2/24 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 198.51.100.1/24 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 2001:db8:10::1/64
+
+	tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \
+		dev v$ol1
+	__simple_if_init g1 v$ol1 2001:db8:3::1/128
+	ip route add vrf v$ol1 2001:db8:3::2/128 via 2001:db8:10::2
+
+	ip route add vrf v$ol1 203.0.113.0/24 dev g1
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+	ip route del vrf v$ol1 203.0.113.0/24
+
+	ip route del vrf v$ol1 2001:db8:3::2/128
+	__simple_if_fini g1 2001:db8:3::1/128
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 2001:db8:10::1/64
+	simple_if_fini $ol1 198.51.100.1/24 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 2001:db8:10::2/64
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 2001:db8:11::1/64
+	vlan_create $ul22 222 v$ul21 2001:db8:12::1/64
+
+	ip -6 route add vrf v$ul21 2001:db8:3::1/128 via 2001:db8:10::1
+	ip -6 route add vrf v$ul21 2001:db8:3::2/128 \
+	   nexthop via 2001:db8:11::2 \
+	   nexthop via 2001:db8:12::2
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$ul21 2001:db8:3::2/128
+	ip -6 route del vrf v$ul21 2001:db8:3::1/128
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 2001:db8:10::2/64
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 2001:db8:13::1/64
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 2001:db8:11::2/64
+	vlan_create $ul32 222 v$ul31 2001:db8:12::2/64
+
+	ip -6 route add vrf v$ul31 2001:db8:3::2/128 via 2001:db8:13::2
+	ip -6 route add vrf v$ul31 2001:db8:3::1/128 \
+	   nexthop via 2001:db8:11::1 \
+	   nexthop via 2001:db8:12::1
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip -6 route del vrf v$ul31 2001:db8:3::1/128
+	ip -6 route del vrf v$ul31 2001:db8:3::2/128
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 2001:db8:13::1/64
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 203.0.113.1/24 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 2001:db8:13::2/64
+
+	tunnel_create g2 ip6gre 2001:db8:3::2 2001:db8:3::1 tos inherit \
+		dev v$ol4
+	__simple_if_init g2 v$ol4 2001:db8:3::2/128
+	ip -6 route add vrf v$ol4 2001:db8:3::1/128 via 2001:db8:13::1
+
+	ip route add vrf v$ol4 198.51.100.0/24 dev g2
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+	ip route del vrf v$ol4 198.51.100.0/24
+
+	ip -6 route del vrf v$ol4 2001:db8:3::1/128
+	__simple_if_fini g2 2001:db8:3::2/128
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 2001:db8:13::2/64
+	simple_if_fini $ol4 203.0.113.1/24 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 203.0.113.2/24 2001:db8:2::2/64
+	ip route add vrf v$h2 default via 203.0.113.1 dev $h2
+	ip -6 route add vrf v$h2 default via 2001:db8:2::1 dev $h2
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 default
+	ip route del vrf v$h2 default
+	simple_if_fini $h2 203.0.113.2/24 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 203.0.113.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+send_src_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A "198.51.100.2-198.51.100.253" -B 203.0.113.2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B "203.0.113.2-203.0.113.253" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_src_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp4()
+{
+	ip vrf exec v$h1 $MZ $h1 -q -p 64 \
+		-A 198.51.100.2 -B 203.0.113.2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+send_src_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A "2001:db8:1::2-2001:db8:1::fd" -B 2001:db8:2::2 \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_dst_ipv6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B "2001:db8:2::2-2001:db8:2::fd" \
+		-d 1msec -c 50 -t udp "sp=20000,dp=30000"
+}
+
+send_flowlabel()
+{
+	# Generate 16384 echo requests, each with a random flow label.
+	for _ in $(seq 1 16384); do
+		ip vrf exec v$h1 \
+			$PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1
+	done
+}
+
+send_src_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=0-32768,dp=30000"
+}
+
+send_dst_udp6()
+{
+	ip vrf exec v$h1 $MZ -6 $h1 -q -p 64 \
+		-A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=20000,dp=0-32768"
+}
+
+custom_hash_test()
+{
+	local field="$1"; shift
+	local balanced="$1"; shift
+	local send_flows="$@"
+
+	RET=0
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	$send_flows
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+
+	local diff=$((d222 - d111))
+	local sum=$((d111 + d222))
+
+	local pct=$(echo "$diff / $sum * 100" | bc -l)
+	local is_balanced=$(echo "-20 <= $pct && $pct <= 20" | bc)
+
+	[[ ( $is_balanced -eq 1 && $balanced == "balanced" ) ||
+	   ( $is_balanced -eq 0 && $balanced == "unbalanced" ) ]]
+	check_err $? "Expected traffic to be $balanced, but it is not"
+
+	log_test "Multipath hash field: $field ($balanced)"
+	log_info "Packets sent on path1 / path2: $d111 / $d222"
+}
+
+custom_hash_v4()
+{
+	log_info "Running IPv4 overlay custom multipath hash tests"
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv4.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv4.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0040
+	custom_hash_test "Inner source IP" "balanced" send_src_ipv4
+	custom_hash_test "Inner source IP" "unbalanced" send_dst_ipv4
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0080
+	custom_hash_test "Inner destination IP" "balanced" send_dst_ipv4
+	custom_hash_test "Inner destination IP" "unbalanced" send_src_ipv4
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0400
+	custom_hash_test "Inner source port" "balanced" send_src_udp4
+	custom_hash_test "Inner source port" "unbalanced" send_dst_udp4
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0800
+	custom_hash_test "Inner destination port" "balanced" send_dst_udp4
+	custom_hash_test "Inner destination port" "unbalanced" send_src_udp4
+
+	sysctl_restore net.ipv4.neigh.default.gc_thresh3
+	sysctl_restore net.ipv4.neigh.default.gc_thresh2
+	sysctl_restore net.ipv4.neigh.default.gc_thresh1
+}
+
+custom_hash_v6()
+{
+	log_info "Running IPv6 overlay custom multipath hash tests"
+
+	# Prevent the neighbour table from overflowing, as different neighbour
+	# entries will be created on $ol4 when using different destination IPs.
+	sysctl_set net.ipv6.neigh.default.gc_thresh1 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh2 1024
+	sysctl_set net.ipv6.neigh.default.gc_thresh3 1024
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0040
+	custom_hash_test "Inner source IP" "balanced" send_src_ipv6
+	custom_hash_test "Inner source IP" "unbalanced" send_dst_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0080
+	custom_hash_test "Inner destination IP" "balanced" send_dst_ipv6
+	custom_hash_test "Inner destination IP" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0200
+	custom_hash_test "Inner flowlabel" "balanced" send_flowlabel
+	custom_hash_test "Inner flowlabel" "unbalanced" send_src_ipv6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0400
+	custom_hash_test "Inner source port" "balanced" send_src_udp6
+	custom_hash_test "Inner source port" "unbalanced" send_dst_udp6
+
+	sysctl_set net.ipv6.fib_multipath_hash_fields 0x0800
+	custom_hash_test "Inner destination port" "balanced" send_dst_udp6
+	custom_hash_test "Inner destination port" "unbalanced" send_src_udp6
+
+	sysctl_restore net.ipv6.neigh.default.gc_thresh3
+	sysctl_restore net.ipv6.neigh.default.gc_thresh2
+	sysctl_restore net.ipv6.neigh.default.gc_thresh1
+}
+
+custom_hash()
+{
+	# Test that when the hash policy is set to custom, traffic is
+	# distributed only according to the fields set in the
+	# fib_multipath_hash_fields sysctl.
+	#
+	# Each time set a different field and make sure traffic is only
+	# distributed when the field is changed in the packet stream.
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 3
+
+	custom_hash_v4
+	custom_hash_v6
+
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_flat.sh b/tools/testing/selftests/net/forwarding/ip6gre_flat.sh
new file mode 100755
index 0000000000..96c97064f2
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_flat.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel without key.
+# This test uses flat topology for IP tunneling tests. See ip6gre_lib.sh for
+# more details.
+
+ALL_TESTS="
+	gre_flat
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create $ol1 $ul1
+	sw2_flat_create $ol2 $ul2
+}
+
+gre_flat()
+{
+	test_traffic_ip4ip6 "GRE flat IPv4-in-IPv6"
+	test_traffic_ip6ip6 "GRE flat IPv6-in-IPv6"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_flat_key.sh b/tools/testing/selftests/net/forwarding/ip6gre_flat_key.sh
new file mode 100755
index 0000000000..ff9fb0db9b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_flat_key.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with key.
+# This test uses flat topology for IP tunneling tests. See ip6gre_lib.sh for
+# more details.
+
+ALL_TESTS="
+	gre_flat
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create $ol1 $ul1 key 233
+	sw2_flat_create $ol2 $ul2 key 233
+}
+
+gre_flat()
+{
+	test_traffic_ip4ip6 "GRE flat IPv4-in-IPv6 with key"
+	test_traffic_ip6ip6 "GRE flat IPv6-in-IPv6 with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_flat_keys.sh b/tools/testing/selftests/net/forwarding/ip6gre_flat_keys.sh
new file mode 100755
index 0000000000..12c1387852
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_flat_keys.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with keys.
+# This test uses flat topology for IP tunneling tests. See ip6gre_lib.sh for
+# more details.
+
+ALL_TESTS="
+	gre_flat
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create $ol1 $ul1 ikey 111 okey 222
+	sw2_flat_create $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_flat()
+{
+	test_traffic_ip4ip6 "GRE flat IPv4-in-IPv6 with ikey/okey"
+	test_traffic_ip6ip6 "GRE flat IPv6-in-IPv6 with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change	gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_hier.sh b/tools/testing/selftests/net/forwarding/ip6gre_hier.sh
new file mode 100755
index 0000000000..83b55c30a5
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_hier.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ip6gre_lib.sh for more details.
+
+ALL_TESTS="
+	gre_hier
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create $ol1 $ul1
+	sw2_hierarchical_create $ol2 $ul2
+}
+
+gre_hier()
+{
+	test_traffic_ip4ip6 "GRE hierarchical IPv4-in-IPv6"
+	test_traffic_ip6ip6 "GRE hierarchical IPv6-in-IPv6"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_hier_key.sh b/tools/testing/selftests/net/forwarding/ip6gre_hier_key.sh
new file mode 100755
index 0000000000..256607916d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_hier_key.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ip6gre_lib.sh for more details.
+
+ALL_TESTS="
+	gre_hier
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create $ol1 $ul1 key 22
+	sw2_hierarchical_create $ol2 $ul2 key 22
+}
+
+gre_hier()
+{
+	test_traffic_ip4ip6 "GRE hierarchical IPv4-in-IPv6 with key"
+	test_traffic_ip6ip6 "GRE hierarchical IPv6-in-IPv6 with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_hier_keys.sh b/tools/testing/selftests/net/forwarding/ip6gre_hier_keys.sh
new file mode 100755
index 0000000000..ad1bcd6334
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_hier_keys.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ip6gre_lib.sh for more details.
+
+ALL_TESTS="
+	gre_hier
+	gre_mtu_change
+"
+
+NUM_NETIFS=6
+source lib.sh
+source ip6gre_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create $ol1 $ul1 ikey 111 okey 222
+	sw2_hierarchical_create $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_hier()
+{
+	test_traffic_ip4ip6 "GRE hierarchical IPv4-in-IPv6 with ikey/okey"
+	test_traffic_ip6ip6 "GRE hierarchical IPv6-in-IPv6 with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh b/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh
new file mode 100755
index 0000000000..a257979d3f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh
@@ -0,0 +1,304 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv6
+# GRE tunnel. The tunnel carries IPv4 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# | 192.0.3.{2-62}/24 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-------------------------+
+# | SW1               |                         |
+# |              $ol1 +                         |
+# |      192.0.3.1/24                           |
+# |                                             |
+# |  + g1 (gre)                                 |
+# |    loc=2001:db8:40::1                       |
+# |    rem=2001:db8:40::2 --.                   |
+# |    tos=inherit          |                   |
+# |                         v                   |
+# |                         + $ul1              |
+# |                         | 2001:db8:80::1/64 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# | SW2                     |                   |
+# |                   $ul21 +                   |
+# |       2001:db8:80::2/64                     |
+# |                   |                         |
+# !   ________________|_____                    |
+# |  /                      \                   |
+# |  |                      |                   |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan)  |
+# |  | 2001:db8:81::1/64    | 2001:db8:82::1/64 |
+# |  |                      |                   |
+# +--|----------------------|-------------------+
+#    |                      |
+# +--|----------------------|-------------------+
+# |  |                      |                   |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan)  |
+# |  | 2001:db8:81::2/64    | 2001:db8:82::2/64 |
+# |  |                      |                   |
+# |  \______________________/                   |
+# |                   |                         |
+# |                   |                         |
+# |                   $ul31 +                   |
+# |       2001:db8:83::2/64 |               SW3 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# |                         + $ul4              |
+# |                         ^ 2001:db8:83::1/64 |
+# |  + g2 (gre)             |                   |
+# |    loc=2001:db8:40::2   |                   |
+# |    rem=2001:db8:40::1 --'                   |
+# |    tos=inherit                              |
+# |                                             |
+# |               $ol4 +                        |
+# |       192.0.4.1/24 |                    SW4 |
+# +--------------------|------------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |  192.0.4.{2-62}/24        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.3.2/24
+	ip route add vrf v$h1 192.0.4.0/24 via 192.0.3.1
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.4.0/24 via 192.0.3.1
+	simple_if_fini $h1 192.0.3.2/24
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.3.1/24
+	__simple_if_init $ul1 v$ol1 2001:db8:80::1/64
+
+	tunnel_create g1 ip6gre 2001:db8:40::1 2001:db8:40::2 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 2001:db8:40::1/128
+	ip -6 route add vrf v$ol1 2001:db8:40::2/128 via 2001:db8:80::2
+
+	ip route add vrf v$ol1 192.0.4.0/24 nexthop dev g1
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.4.0/24
+
+	ip -6 route del vrf v$ol1 2001:db8:40::2/128
+	__simple_if_fini g1 2001:db8:40::1/128
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 2001:db8:80::1/64
+	simple_if_fini $ol1 192.0.3.1/24
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 2001:db8:80::2/64
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 2001:db8:81::1/64
+	vlan_create $ul22 222 v$ul21 2001:db8:82::1/64
+
+	ip -6 route add vrf v$ul21 2001:db8:40::1/128 via 2001:db8:80::1
+	ip -6 route add vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$ul21 2001:db8:40::2/128
+	ip -6 route del vrf v$ul21 2001:db8:40::1/128
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 2001:db8:80::2/64
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 2001:db8:83::2/64
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 2001:db8:81::2/64
+	vlan_create $ul32 222 v$ul31 2001:db8:82::2/64
+
+	ip -6 route add vrf v$ul31 2001:db8:40::2/128 via 2001:db8:83::1
+	ip -6 route add vrf v$ul31 2001:db8:40::1/128 \
+	   nexthop via 2001:db8:81::1 \
+	   nexthop via 2001:db8:82::1
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip -6 route del vrf v$ul31 2001:db8:40::1/128
+	ip -6 route del vrf v$ul31 2001:db8:40::2/128
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 2001:Db8:83::2/64
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 192.0.4.1/24
+	__simple_if_init $ul4 v$ol4 2001:db8:83::1/64
+
+	tunnel_create g2 ip6gre 2001:db8:40::2 2001:db8:40::1 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 2001:db8:40::2/128
+	ip -6 route add vrf v$ol4 2001:db8:40::1/128 via 2001:db8:83::2
+
+	ip route add vrf v$ol4 192.0.3.0/24 nexthop dev g2
+}
+
+sw4_destroy()
+{
+	ip route del vrf v$ol4 192.0.3.0/24
+
+	ip -6 route del vrf v$ol4 2001:db8:40::1/128
+	__simple_if_fini g2 2001:db8:40::2/128
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 2001:db8:83::1/64
+	simple_if_fini $ol4 192.0.4.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.4.2/24
+	ip route add vrf v$h2 192.0.3.0/24 via 192.0.4.1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.3.0/24 via 192.0.4.1
+	simple_if_fini $h2 192.0.4.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 weight $weight1 \
+	   nexthop via 2001:db8:82::2 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A "192.0.3.2-192.0.3.62" -B "192.0.4.2-192.0.4.62" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.4.2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 over GRE over IPv6 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh b/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh
new file mode 100755
index 0000000000..d208f5243a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh
@@ -0,0 +1,305 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv6
+# GRE tunnel. The tunnel carries IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-------------------------+
+# | SW1               |                         |
+# |              $ol1 +                         |
+# |  2001:db8:1::1/64                           |
+# |                                             |
+# |  + g1 (gre)                                 |
+# |    loc=2001:db8:40::1                       |
+# |    rem=2001:db8:40::2 --.                   |
+# |    tos=inherit          |                   |
+# |                         v                   |
+# |                         + $ul1              |
+# |                         | 2001:db8:80::1/64 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# | SW2                     |                   |
+# |                   $ul21 +                   |
+# |       2001:db8:80::2/64                     |
+# |                   |                         |
+# !   ________________|_____                    |
+# |  /                      \                   |
+# |  |                      |                   |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan)  |
+# |  | 2001:db8:81::1/64    | 2001:db8:82::1/64 |
+# |  |                      |                   |
+# +--|----------------------|-------------------+
+#    |                      |
+# +--|----------------------|-------------------+
+# |  |                      |                   |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan)  |
+# |  | 2001:db8:81::2/64    | 2001:db8:82::2/64 |
+# |  |                      |                   |
+# |  \______________________/                   |
+# |                   |                         |
+# |                   |                         |
+# |                   $ul31 +                   |
+# |       2001:db8:83::2/64 |               SW3 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# |                         + $ul4              |
+# |                         ^ 2001:db8:83::1/64 |
+# |  + g2 (gre)             |                   |
+# |    loc=2001:db8:40::2   |                   |
+# |    rem=2001:db8:40::1 --'                   |
+# |    tos=inherit                              |
+# |                                             |
+# |               $ol4 +                        |
+# |   2001:db8:2::1/64 |                    SW4 |
+# +--------------------|------------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |   2001:db8:2::2/64        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+	multipath_ipv6
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::2/64
+	ip -6 route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+	simple_if_fini $h1 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 2001:db8:80::1/64
+
+	tunnel_create g1 ip6gre 2001:db8:40::1 2001:db8:40::2 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 2001:db8:40::1/128
+	ip -6 route add vrf v$ol1 2001:db8:40::2/128 via 2001:db8:80::2
+
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+
+	ip -6 route del vrf v$ol1 2001:db8:40::2/128
+	__simple_if_fini g1 2001:db8:40::1/128
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 2001:db8:80::1/64
+	simple_if_fini $ol1 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 2001:db8:80::2/64
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 2001:db8:81::1/64
+	vlan_create $ul22 222 v$ul21 2001:db8:82::1/64
+
+	ip -6 route add vrf v$ul21 2001:db8:40::1/128 via 2001:db8:80::1
+	ip -6 route add vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$ul21 2001:db8:40::2/128
+	ip -6 route del vrf v$ul21 2001:db8:40::1/128
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 2001:db8:80::2/64
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 2001:db8:83::2/64
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 2001:db8:81::2/64
+	vlan_create $ul32 222 v$ul31 2001:db8:82::2/64
+
+	ip -6 route add vrf v$ul31 2001:db8:40::2/128 via 2001:db8:83::1
+	ip -6 route add vrf v$ul31 2001:db8:40::1/128 \
+	   nexthop via 2001:db8:81::1 \
+	   nexthop via 2001:db8:82::1
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip -6 route del vrf v$ul31 2001:db8:40::1/128
+	ip -6 route del vrf v$ul31 2001:db8:40::2/128
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 2001:Db8:83::2/64
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 2001:db8:83::1/64
+
+	tunnel_create g2 ip6gre 2001:db8:40::2 2001:db8:40::1 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 2001:db8:40::2/128
+	ip -6 route add vrf v$ol4 2001:db8:40::1/128 via 2001:db8:83::2
+
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+
+	ip -6 route del vrf v$ol4 2001:db8:40::1/128
+	__simple_if_fini g2 2001:db8:40::2/128
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 2001:db8:83::1/64
+	simple_if_fini $ol4 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:2::2/64
+	ip -6 route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	simple_if_fini $h2 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 weight $weight1 \
+	   nexthop via 2001:db8:82::2 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -6 -q -p 64 -A "2001:db8:1::2-2001:db8:1::1e" \
+	       -B "2001:db8:2::2-2001:db8:2::1e" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv6()
+{
+	ping_test $h1 2001:db8:2::2
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 over GRE over IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_lib.sh b/tools/testing/selftests/net/forwarding/ip6gre_lib.sh
new file mode 100644
index 0000000000..58a3597037
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_lib.sh
@@ -0,0 +1,438 @@
+# SPDX-License-Identifier: GPL-2.0
+#!/bin/bash
+
+# Handles creation and destruction of IP-in-IP or GRE tunnels over the given
+# topology. Supports both flat and hierarchical models.
+#
+# Flat Model:
+# Overlay and underlay share the same VRF.
+# SW1 uses default VRF so tunnel has no bound dev.
+# SW2 uses non-default VRF tunnel has a bound dev.
+# +--------------------------------+
+# | H1                             |
+# |                     $h1 +      |
+# |        198.51.100.1/24  |      |
+# |        2001:db8:1::1/64 |      |
+# +-------------------------|------+
+#                           |
+# +-------------------------|-------------------+
+# | SW1                     |                   |
+# |                    $ol1 +                   |
+# |        198.51.100.2/24                      |
+# |        2001:db8:1::2/64                     |
+# |                                             |
+# |      + g1a (ip6gre)                         |
+# |        loc=2001:db8:3::1                    |
+# |        rem=2001:db8:3::2 --.                |
+# |        tos=inherit         |                |
+# |                            .                |
+# |      .---------------------                 |
+# |      |                                      |
+# |      v                                      |
+# |      + $ul1.111 (vlan)                      |
+# |      | 2001:db8:10::1/64                    |
+# |       \                                     |
+# |        \____________                        |
+# |                     |                       |
+# | VRF default         + $ul1                  |
+# +---------------------|-----------------------+
+#                       |
+# +---------------------|-----------------------+
+# | SW2                 |                       |
+# |                $ul2 +                       |
+# |          ___________|                       |
+# |         /                                   |
+# |        /                                    |
+# |       + $ul2.111 (vlan)                     |
+# |       ^ 2001:db8:10::2/64                   |
+# |       |                                     |
+# |       |                                     |
+# |       '----------------------.              |
+# |       + g2a (ip6gre)         |              |
+# |         loc=2001:db8:3::2    |              |
+# |         rem=2001:db8:3::1  --'              |
+# |         tos=inherit                         |
+# |                                             |
+# |                     + $ol2                  |
+# |                     | 203.0.113.2/24        |
+# | VRF v$ol2           | 2001:db8:2::2/64      |
+# +---------------------|-----------------------+
+# +---------------------|----------+
+# | H2                  |          |
+# |                 $h2 +          |
+# |    203.0.113.1/24              |
+# |    2001:db8:2::1/64            |
+# +--------------------------------+
+#
+# Hierarchical model:
+# The tunnel is bound to a device in a different VRF
+#
+# +--------------------------------+
+# | H1                             |
+# |                     $h1 +      |
+# |        198.51.100.1/24  |      |
+# |        2001:db8:1::1/64 |      |
+# +-------------------------|------+
+#                           |
+# +-------------------------|-------------------+
+# | SW1                     |                   |
+# | +-----------------------|-----------------+ |
+# | |                  $ol1 +                 | |
+# | |      198.51.100.2/24                    | |
+# | |      2001:db8:1::2/64                   | |
+# | |                                         | |
+# | |              + g1a (ip6gre)             | |
+# | |                loc=2001:db8:3::1        | |
+# | |                rem=2001:db8:3::2        | |
+# | |                tos=inherit              | |
+# | |                    ^                    | |
+# | |   VRF v$ol1        |                    | |
+# | +--------------------|--------------------+ |
+# |                      |                      |
+# | +--------------------|--------------------+ |
+# | |   VRF v$ul1        |                    | |
+# | |                    |                    | |
+# | |                    v                    | |
+# | |             dummy1 +                    | |
+# | |       2001:db8:3::1/64                  | |
+# | |         .-----------'                   | |
+# | |         |                               | |
+# | |         v                               | |
+# | |         + $ul1.111 (vlan)               | |
+# | |         | 2001:db8:10::1/64             | |
+# | |         \                               | |
+# | |          \__________                    | |
+# | |                     |                   | |
+# | |                     + $ul1              | |
+# | +---------------------|-------------------+ |
+# +-----------------------|---------------------+
+#                         |
+# +-----------------------|---------------------+
+# | SW2                   |                     |
+# | +---------------------|-------------------+ |
+# | |                     + $ul2              | |
+# | |                _____|                   | |
+# | |               /                         | |
+# | |              /                          | |
+# | |              | $ul2.111 (vlan)          | |
+# | |              + 2001:db8:10::2/64        | |
+# | |              ^                          | |
+# | |              |                          | |
+# | |              '------.                   | |
+# | |              dummy2 +                   | |
+# | |              2001:db8:3::2/64           | |
+# | |                     ^                   | |
+# | |                     |                   | |
+# | |                     |                   | |
+# | | VRF v$ul2           |                   | |
+# | +---------------------|-------------------+ |
+# |                       |                     |
+# | +---------------------|-------------------+ |
+# | | VRF v$ol2           |                   | |
+# | |                     |                   | |
+# | |                     v                   | |
+# | |        g2a (ip6gre) +                   | |
+# | |        loc=2001:db8:3::2                | |
+# | |        rem=2001:db8:3::1                | |
+# | |        tos=inherit                      | |
+# | |                                         | |
+# | |                $ol2 +                   | |
+# | |    203.0.113.2/24   |                   | |
+# | |    2001:db8:2::2/64 |                   | |
+# | +---------------------|-------------------+ |
+# +-----------------------|---------------------+
+#                         |
+# +-----------------------|--------+
+# | H2                    |        |
+# |                   $h2 +        |
+# |      203.0.113.1/24            |
+# |      2001:db8:2::1/64          |
+# +--------------------------------+
+
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.1/24 2001:db8:1::1/64
+	ip route add vrf v$h1 203.0.113.0/24 via 198.51.100.2
+	ip -6 route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::2
+	ip route del vrf v$h1 203.0.113.0/24 via 198.51.100.2
+	simple_if_fini $h1 198.51.100.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 203.0.113.1/24 2001:db8:2::1/64
+	ip route add vrf v$h2 198.51.100.0/24 via 203.0.113.2
+	ip -6 route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::2
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::2
+	ip route del vrf v$h2 198.51.100.0/24 via 203.0.113.2
+	simple_if_fini $h2 203.0.113.1/24 2001:db8:2::1/64
+}
+
+sw1_flat_create()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip link set dev $ol1 up
+        __addr_add_del $ol1 add 198.51.100.2/24 2001:db8:1::2/64
+
+	ip link set dev $ul1 up
+	vlan_create $ul1 111 "" 2001:db8:10::1/64
+
+	tunnel_create g1a ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \
+		ttl inherit "$@"
+	ip link set dev g1a up
+        __addr_add_del g1a add "2001:db8:3::1/128"
+
+	ip -6 route add 2001:db8:3::2/128 via 2001:db8:10::2
+	ip route add 203.0.113.0/24 dev g1a
+	ip -6 route add 2001:db8:2::/64 dev g1a
+}
+
+sw1_flat_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip -6 route del 2001:db8:2::/64
+	ip route del 203.0.113.0/24
+	ip -6 route del 2001:db8:3::2/128 via 2001:db8:10::2
+
+	__simple_if_fini g1a 2001:db8:3::1/128
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	__simple_if_fini $ol1 198.51.100.2/24 2001:db8:1::2/64
+}
+
+sw2_flat_create()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 203.0.113.2/24 2001:db8:2::2/64
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 2001:db8:10::2/64
+
+	tunnel_create g2a ip6gre 2001:db8:3::2 2001:db8:3::1 tos inherit \
+		ttl inherit dev v$ol2 "$@"
+	__simple_if_init g2a v$ol2 2001:db8:3::2/128
+
+	# Replace neighbor to avoid 1 dropped packet due to "unresolved neigh"
+	ip neigh replace dev $ol2 203.0.113.1 lladdr $(mac_get $h2)
+	ip -6 neigh replace dev $ol2 2001:db8:2::1 lladdr $(mac_get $h2)
+
+	ip -6 route add vrf v$ol2 2001:db8:3::1/128 via 2001:db8:10::1
+	ip route add vrf v$ol2 198.51.100.0/24 dev g2a
+	ip -6 route add vrf v$ol2 2001:db8:1::/64 dev g2a
+}
+
+sw2_flat_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip -6 route del vrf v$ol2 2001:db8:2::/64
+	ip route del vrf v$ol2 198.51.100.0/24
+	ip -6 route del vrf v$ol2 2001:db8:3::1/128 via 2001:db8:10::1
+
+	__simple_if_fini g2a 2001:db8:3::2/128
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 203.0.113.2/24 2001:db8:2::2/64
+}
+
+sw1_hierarchical_create()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	simple_if_init $ol1 198.51.100.2/24 2001:db8:1::2/64
+	simple_if_init $ul1
+	ip link add name dummy1 type dummy
+	__simple_if_init dummy1 v$ul1 2001:db8:3::1/64
+
+	vlan_create $ul1 111 v$ul1 2001:db8:10::1/64
+	tunnel_create g1a ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \
+		ttl inherit dev dummy1 "$@"
+	ip link set dev g1a master v$ol1
+
+	ip -6 route add vrf v$ul1 2001:db8:3::2/128 via 2001:db8:10::2
+	ip route add vrf v$ol1 203.0.113.0/24 dev g1a
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1a
+}
+
+sw1_hierarchical_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+	ip route del vrf v$ol1 203.0.113.0/24
+	ip -6 route del vrf v$ul1 2001:db8:3::2/128
+
+	tunnel_destroy g1a
+	vlan_destroy $ul1 111
+
+	__simple_if_fini dummy1 2001:db8:3::1/64
+	ip link del dev dummy1
+
+	simple_if_fini $ul1
+	simple_if_fini $ol1 198.51.100.2/24 2001:db8:1::2/64
+}
+
+sw2_hierarchical_create()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 203.0.113.2/24 2001:db8:2::2/64
+	simple_if_init $ul2
+
+	ip link add name dummy2 type dummy
+	__simple_if_init dummy2 v$ul2 2001:db8:3::2/64
+
+	vlan_create $ul2 111 v$ul2 2001:db8:10::2/64
+	tunnel_create g2a ip6gre 2001:db8:3::2 2001:db8:3::1 tos inherit \
+		ttl inherit dev dummy2 "$@"
+	ip link set dev g2a master v$ol2
+
+	# Replace neighbor to avoid 1 dropped packet due to "unresolved neigh"
+	ip neigh replace dev $ol2 203.0.113.1 lladdr $(mac_get $h2)
+	ip -6 neigh replace dev $ol2 2001:db8:2::1 lladdr $(mac_get $h2)
+
+	ip -6 route add vrf v$ul2 2001:db8:3::1/128 via 2001:db8:10::1
+	ip route add vrf v$ol2 198.51.100.0/24 dev g2a
+	ip -6 route add vrf v$ol2 2001:db8:1::/64 dev g2a
+}
+
+sw2_hierarchical_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip -6 route del vrf v$ol2 2001:db8:2::/64
+	ip route del vrf v$ol2 198.51.100.0/24
+	ip -6 route del vrf v$ul2 2001:db8:3::1/128
+
+	tunnel_destroy g2a
+	vlan_destroy $ul2 111
+
+	__simple_if_fini dummy2 2001:db8:3::2/64
+	ip link del dev dummy2
+
+	simple_if_fini $ul2
+	simple_if_fini $ol2 203.0.113.2/24 2001:db8:2::2/64
+}
+
+test_traffic_ip4ip6()
+{
+	RET=0
+
+	h1mac=$(mac_get $h1)
+	ol1mac=$(mac_get $ol1)
+
+	tc qdisc add dev $ul1 clsact
+	tc filter add dev $ul1 egress proto all pref 1 handle 101 \
+		flower $TC_FLAG action pass
+
+	tc qdisc add dev $ol2 clsact
+	tc filter add dev $ol2 egress protocol ipv4 pref 1 handle 101 \
+		flower $TC_FLAG dst_ip 203.0.113.1 action pass
+
+	$MZ $h1 -c 1000 -p 64 -a $h1mac -b $ol1mac -A 198.51.100.1 \
+		-B 203.0.113.1 -t ip -q -d 1msec
+
+	# Check ports after encap and after decap.
+	tc_check_at_least_x_packets "dev $ul1 egress" 101 1000
+	check_err $? "Packets did not go through $ul1, tc_flag = $TC_FLAG"
+
+	tc_check_at_least_x_packets "dev $ol2 egress" 101 1000
+	check_err $? "Packets did not go through $ol2, tc_flag = $TC_FLAG"
+
+	log_test "$@"
+
+	tc filter del dev $ol2 egress protocol ipv4 pref 1 handle 101 flower
+	tc qdisc del dev $ol2 clsact
+	tc filter del dev $ul1 egress proto all pref 1 handle 101 flower
+	tc qdisc del dev $ul1 clsact
+}
+
+test_traffic_ip6ip6()
+{
+	RET=0
+
+	h1mac=$(mac_get $h1)
+	ol1mac=$(mac_get $ol1)
+
+	tc qdisc add dev $ul1 clsact
+	tc filter add dev $ul1 egress proto all pref 1 handle 101 \
+		flower $TC_FLAG action pass
+
+	tc qdisc add dev $ol2 clsact
+	tc filter add dev $ol2 egress protocol ipv6 pref 1 handle 101 \
+		flower $TC_FLAG dst_ip 2001:db8:2::1 action pass
+
+	$MZ -6 $h1 -c 1000 -p 64 -a $h1mac -b $ol1mac -A 2001:db8:1::1 \
+		-B 2001:db8:2::1 -t ip -q -d 1msec
+
+	# Check ports after encap and after decap.
+	tc_check_at_least_x_packets "dev $ul1 egress" 101 1000
+	check_err $? "Packets did not go through $ul1, tc_flag = $TC_FLAG"
+
+	tc_check_at_least_x_packets "dev $ol2 egress" 101 1000
+	check_err $? "Packets did not go through $ol2, tc_flag = $TC_FLAG"
+
+	log_test "$@"
+
+	tc filter del dev $ol2 egress protocol ipv6 pref 1 handle 101 flower
+	tc qdisc del dev $ol2 clsact
+	tc filter del dev $ul1 egress proto all pref 1 handle 101 flower
+	tc qdisc del dev $ul1 clsact
+}
+
+topo_mtu_change()
+{
+	local mtu=$1
+
+	ip link set mtu $mtu dev $h1
+	ip link set mtu $mtu dev $ol1
+	ip link set mtu $mtu dev g1a
+	ip link set mtu $mtu dev $ul1
+	ip link set mtu $mtu dev $ul1.111
+	ip link set mtu $mtu dev $h2
+	ip link set mtu $mtu dev $ol2
+	ip link set mtu $mtu dev g2a
+	ip link set mtu $mtu dev $ul2
+	ip link set mtu $mtu dev $ul2.111
+}
+
+test_mtu_change()
+{
+	RET=0
+
+	ping6_do $h1 2001:db8:2::1 "-s 1800 -w 3"
+	check_fail $? "ping GRE IPv6 should not pass with packet size 1800"
+
+	RET=0
+
+	topo_mtu_change	2000
+	ping6_do $h1 2001:db8:2::1 "-s 1800 -w 3"
+	check_err $?
+	log_test "ping GRE IPv6, packet size 1800 after MTU change"
+}
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh
new file mode 100755
index 0000000000..abb694397b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel without key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1
+	sw2_flat_create gre $ol2 $ul2
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh
new file mode 100755
index 0000000000..c4f373337e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1 key 233
+	sw2_flat_create gre $ol2 $ul2 key 233
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change	gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh
new file mode 100755
index 0000000000..a811130c06
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1 ikey 111 okey 222
+	sw2_flat_create gre $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change	gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh
new file mode 100755
index 0000000000..05c5b3cf2f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1
+	sw2_hierarchical_create gre $ol2 $ul2
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh
new file mode 100755
index 0000000000..9b105dbca3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1 key 22
+	sw2_hierarchical_create gre $ol2 $ul2 key 22
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh
new file mode 100755
index 0000000000..e275d25bd8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1 ikey 111 okey 222
+	sw2_hierarchical_create gre $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_lib.sh b/tools/testing/selftests/net/forwarding/ipip_lib.sh
new file mode 100644
index 0000000000..30f36a57ba
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_lib.sh
@@ -0,0 +1,349 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Handles creation and destruction of IP-in-IP or GRE tunnels over the given
+# topology. Supports both flat and hierarchical models.
+#
+# Flat Model:
+# Overlay and underlay share the same VRF.
+# SW1 uses default VRF so tunnel has no bound dev.
+# SW2 uses non-default VRF tunnel has a bound dev.
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-----+
+# | SW1               |     |
+# |              $ol1 +     |
+# |      192.0.2.2/28       |
+# |                         |
+# |  + g1a (gre)            |
+# |    loc=192.0.2.65       |
+# |    rem=192.0.2.66 --.   |
+# |    tos=inherit      |   |
+# |  .------------------'   |
+# |  |                      |
+# |  v                      |
+# |  + $ul1.111 (vlan)      |
+# |  | 192.0.2.129/28       |
+# |   \                     |
+# |    \_______             |
+# |            |            |
+# |VRF default + $ul1       |
+# +------------|------------+
+#              |
+# +------------|------------+
+# | SW2        + $ul2       |
+# |     _______|            |
+# |    /                    |
+# |   /                     |
+# |  + $ul2.111 (vlan)      |
+# |  ^ 192.0.2.130/28       |
+# |  |                      |
+# |  |                      |
+# |  '------------------.   |
+# |  + g2a (gre)        |   |
+# |    loc=192.0.2.66   |   |
+# |    rem=192.0.2.65 --'   |
+# |    tos=inherit          |
+# |                         |
+# |              $ol2 +     |
+# |     192.0.2.17/28 |     |
+# | VRF v$ol2         |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# +-------------------------+
+#
+# Hierarchical model:
+# The tunnel is bound to a device in a different VRF
+#
+# +---------------------------+
+# | H1                        |
+# |               $h1 +       |
+# |      192.0.2.1/28 |       |
+# +-------------------|-------+
+#                     |
+# +-------------------|-------+
+# | SW1               |       |
+# | +-----------------|-----+ |
+# | |            $ol1 +     | |
+# | |     192.0.2.2/28      | |
+# | |                       | |
+# | |    + g1a (gre)        | |
+# | |    rem=192.0.2.66     | |
+# | |    tos=inherit        | |
+# | |    loc=192.0.2.65     | |
+# | |           ^           | |
+# | | VRF v$ol1 |           | |
+# | +-----------|-----------+ |
+# |             |             |
+# | +-----------|-----------+ |
+# | | VRF v$ul1 |           | |
+# | |           |           | |
+# | |           |           | |
+# | |           v           | |
+# | |    dummy1 +           | |
+# | |   192.0.2.65          | |
+# | |   .-------'           | |
+# | |   |                   | |
+# | |   v                   | |
+# | |   + $ul1.111 (vlan)   | |
+# | |   | 192.0.2.129/28    | |
+# | |   \                   | |
+# | |    \_____             | |
+# | |          |            | |
+# | |          + $ul1       | |
+# | +----------|------------+ |
+# +------------|--------------+
+#              |
+# +------------|--------------+
+# | SW2        |              |
+# | +----------|------------+ |
+# | |          + $ul2       | |
+# | |     _____|            | |
+# | |    /                  | |
+# | |   /                   | |
+# | |   | $ul2.111 (vlan)   | |
+# | |   + 192.0.2.130/28    | |
+# | |   ^                   | |
+# | |   |                   | |
+# | |   '-------.           | |
+# | |    dummy2 +           | |
+# | |    192.0.2.66         | |
+# | |           ^           | |
+# | |           |           | |
+# | |           |           | |
+# | | VRF v$ul2 |           | |
+# | +-----------|-----------+ |
+# |             |             |
+# | +-----------|-----------+ |
+# | | VRF v$ol2 |           | |
+# | |           |           | |
+# | |           v           | |
+# | |  g2a (gre)+           | |
+# | |  loc=192.0.2.66       | |
+# | |  rem=192.0.2.65       | |
+# | |  tos=inherit          | |
+# | |                       | |
+# | |            $ol2 +     | |
+# | |   192.0.2.17/28 |     | |
+# | +-----------------|-----+ |
+# +-------------------|-------+
+#                     |
+# +-------------------|-------+
+# | H2                |       |
+# |               $h2 +       |
+# |     192.0.2.18/28         |
+# +---------------------------+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+sw1_flat_create()
+{
+	local type=$1; shift
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip link set dev $ol1 up
+        __addr_add_del $ol1 add "192.0.2.2/28"
+
+	ip link set dev $ul1 up
+	vlan_create $ul1 111 "" 192.0.2.129/28
+
+	tunnel_create g1a $type 192.0.2.65 192.0.2.66 tos inherit "$@"
+	ip link set dev g1a up
+        __addr_add_del g1a add "192.0.2.65/32"
+
+	ip route add 192.0.2.66/32 via 192.0.2.130
+
+	ip route add 192.0.2.16/28 nexthop dev g1a
+}
+
+sw1_flat_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip route del 192.0.2.16/28
+
+	ip route del 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	__simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_flat_create()
+{
+	local type=$1; shift
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 192.0.2.17/28
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+
+	tunnel_create g2a $type 192.0.2.66 192.0.2.65 tos inherit dev v$ol2 \
+		"$@"
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ol2 192.0.2.0/28 nexthop dev g2a
+}
+
+sw2_flat_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+sw1_hierarchical_create()
+{
+	local type=$1; shift
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	simple_if_init $ol1 192.0.2.2/28
+	simple_if_init $ul1
+	ip link add name dummy1 type dummy
+	__simple_if_init dummy1 v$ul1 192.0.2.65/32
+
+	vlan_create $ul1 111 v$ul1 192.0.2.129/28
+	tunnel_create g1a $type 192.0.2.65 192.0.2.66 tos inherit dev dummy1 \
+		"$@"
+	ip link set dev g1a master v$ol1
+
+	ip route add vrf v$ul1 192.0.2.66/32 via 192.0.2.130
+	ip route add vrf v$ol1 192.0.2.16/28 nexthop dev g1a
+}
+
+sw1_hierarchical_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip route del vrf v$ol1 192.0.2.16/28
+	ip route del vrf v$ul1 192.0.2.66/32
+
+	tunnel_destroy g1a
+	vlan_destroy $ul1 111
+
+	__simple_if_fini dummy1 192.0.2.65/32
+	ip link del dev dummy1
+
+	simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_hierarchical_create()
+{
+	local type=$1; shift
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 192.0.2.17/28
+	simple_if_init $ul2
+
+	ip link add name dummy2 type dummy
+	__simple_if_init dummy2 v$ul2 192.0.2.66/32
+
+	vlan_create $ul2 111 v$ul2 192.0.2.130/28
+	tunnel_create g2a $type 192.0.2.66 192.0.2.65 tos inherit dev dummy2 \
+		"$@"
+	ip link set dev g2a master v$ol2
+
+	ip route add vrf v$ul2 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ol2 192.0.2.0/28 nexthop dev g2a
+}
+
+sw2_hierarchical_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip route del vrf v$ol2 192.0.2.0/28
+	ip route del vrf v$ul2 192.0.2.65/32
+
+	tunnel_destroy g2a
+	vlan_destroy $ul2 111
+
+	__simple_if_fini dummy2 192.0.2.66/32
+	ip link del dev dummy2
+
+	simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+topo_mtu_change()
+{
+	local mtu=$1
+
+	ip link set mtu $mtu dev $h1
+	ip link set mtu $mtu dev $ol1
+	ip link set mtu $mtu dev g1a
+	ip link set mtu $mtu dev $ul1
+	ip link set mtu $mtu dev $ul1.111
+	ip link set mtu $mtu dev $h2
+	ip link set mtu $mtu dev $ol2
+	ip link set mtu $mtu dev g2a
+	ip link set mtu $mtu dev $ul2
+	ip link set mtu $mtu dev $ul2.111
+}
+
+test_mtu_change()
+{
+	local encap=$1; shift
+
+	RET=0
+
+	ping_do $h1 192.0.2.18 "-s 1800	-w 3"
+	check_fail $? "ping $encap should not pass with size 1800"
+
+	RET=0
+
+	topo_mtu_change	2000
+	ping_do	$h1 192.0.2.18 "-s 1800	-w 3"
+	check_err $?
+	log_test "ping $encap packet size 1800 after MTU change"
+}
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
new file mode 100755
index 0000000000..e37a15eda6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -0,0 +1,1985 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Defines
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# Can be overridden by the configuration file.
+PING=${PING:=ping}
+PING6=${PING6:=ping6}
+MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
+TEAMD=${TEAMD:=teamd}
+WAIT_TIME=${WAIT_TIME:=5}
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
+NETIF_TYPE=${NETIF_TYPE:=veth}
+NETIF_CREATE=${NETIF_CREATE:=yes}
+MCD=${MCD:=smcrouted}
+MC_CLI=${MC_CLI:=smcroutectl}
+PING_COUNT=${PING_COUNT:=10}
+PING_TIMEOUT=${PING_TIMEOUT:=5}
+WAIT_TIMEOUT=${WAIT_TIMEOUT:=20}
+INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600}
+LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000}
+REQUIRE_JQ=${REQUIRE_JQ:=yes}
+REQUIRE_MZ=${REQUIRE_MZ:=yes}
+REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no}
+STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no}
+TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=}
+TROUTE6=${TROUTE6:=traceroute6}
+
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+if [[ -f $relative_path/forwarding.config ]]; then
+	source "$relative_path/forwarding.config"
+fi
+
+##############################################################################
+# Sanity checks
+
+check_tc_version()
+{
+	tc -j &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing JSON support"
+		exit $ksft_skip
+	fi
+}
+
+# Old versions of tc don't understand "mpls_uc"
+check_tc_mpls_support()
+{
+	local dev=$1; shift
+
+	tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \
+		matchall action pipe &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing MPLS support"
+		return $ksft_skip
+	fi
+	tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \
+		matchall
+}
+
+# Old versions of tc produce invalid json output for mpls lse statistics
+check_tc_mpls_lse_stats()
+{
+	local dev=$1; shift
+	local ret;
+
+	tc filter add dev $dev ingress protocol mpls_uc pref 1 handle 1 \
+		flower mpls lse depth 2                                 \
+		action continue &> /dev/null
+
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc-flower is missing extended MPLS support"
+		return $ksft_skip
+	fi
+
+	tc -j filter show dev $dev ingress protocol mpls_uc | jq . &> /dev/null
+	ret=$?
+	tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \
+		flower
+
+	if [[ $ret -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc-flower produces invalid json output for extended MPLS filters"
+		return $ksft_skip
+	fi
+}
+
+check_tc_shblock_support()
+{
+	tc filter help 2>&1 | grep block &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing shared block support"
+		exit $ksft_skip
+	fi
+}
+
+check_tc_chain_support()
+{
+	tc help 2>&1|grep chain &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing chain support"
+		exit $ksft_skip
+	fi
+}
+
+check_tc_action_hw_stats_support()
+{
+	tc actions help 2>&1 | grep -q hw_stats
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing action hw_stats support"
+		exit $ksft_skip
+	fi
+}
+
+check_tc_fp_support()
+{
+	tc qdisc add dev lo mqprio help 2>&1 | grep -q "fp "
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing frame preemption support"
+		exit $ksft_skip
+	fi
+}
+
+check_ethtool_lanes_support()
+{
+	ethtool --help 2>&1| grep lanes &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: ethtool too old; it is missing lanes support"
+		exit $ksft_skip
+	fi
+}
+
+check_ethtool_mm_support()
+{
+	ethtool --help 2>&1| grep -- '--show-mm' &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: ethtool too old; it is missing MAC Merge layer support"
+		exit $ksft_skip
+	fi
+}
+
+check_locked_port_support()
+{
+	if ! bridge -d link show | grep -q " locked"; then
+		echo "SKIP: iproute2 too old; Locked port feature not supported."
+		return $ksft_skip
+	fi
+}
+
+check_port_mab_support()
+{
+	if ! bridge -d link show | grep -q "mab"; then
+		echo "SKIP: iproute2 too old; MacAuth feature not supported."
+		return $ksft_skip
+	fi
+}
+
+skip_on_veth()
+{
+	local kind=$(ip -j -d link show dev ${NETIFS[p1]} |
+		jq -r '.[].linkinfo.info_kind')
+
+	if [[ $kind == veth ]]; then
+		echo "SKIP: Test cannot be run with veth pairs"
+		exit $ksft_skip
+	fi
+}
+
+if [[ "$(id -u)" -ne 0 ]]; then
+	echo "SKIP: need root privileges"
+	exit $ksft_skip
+fi
+
+if [[ "$CHECK_TC" = "yes" ]]; then
+	check_tc_version
+fi
+
+require_command()
+{
+	local cmd=$1; shift
+
+	if [[ ! -x "$(command -v "$cmd")" ]]; then
+		echo "SKIP: $cmd not installed"
+		exit $ksft_skip
+	fi
+}
+
+if [[ "$REQUIRE_JQ" = "yes" ]]; then
+	require_command jq
+fi
+if [[ "$REQUIRE_MZ" = "yes" ]]; then
+	require_command $MZ
+fi
+if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then
+	# https://github.com/vladimiroltean/mtools/
+	# patched for IPv6 support
+	require_command msend
+	require_command mreceive
+fi
+
+if [[ ! -v NUM_NETIFS ]]; then
+	echo "SKIP: importer does not define \"NUM_NETIFS\""
+	exit $ksft_skip
+fi
+
+##############################################################################
+# Command line options handling
+
+count=0
+
+while [[ $# -gt 0 ]]; do
+	if [[ "$count" -eq "0" ]]; then
+		unset NETIFS
+		declare -A NETIFS
+	fi
+	count=$((count + 1))
+	NETIFS[p$count]="$1"
+	shift
+done
+
+##############################################################################
+# Network interfaces configuration
+
+create_netif_veth()
+{
+	local i
+
+	for ((i = 1; i <= NUM_NETIFS; ++i)); do
+		local j=$((i+1))
+
+		if [ -z ${NETIFS[p$i]} ]; then
+			echo "SKIP: Cannot create interface. Name not specified"
+			exit $ksft_skip
+		fi
+
+		ip link show dev ${NETIFS[p$i]} &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			ip link add ${NETIFS[p$i]} type veth \
+				peer name ${NETIFS[p$j]}
+			if [[ $? -ne 0 ]]; then
+				echo "Failed to create netif"
+				exit 1
+			fi
+		fi
+		i=$j
+	done
+}
+
+create_netif()
+{
+	case "$NETIF_TYPE" in
+	veth) create_netif_veth
+	      ;;
+	*) echo "Can not create interfaces of type \'$NETIF_TYPE\'"
+	   exit 1
+	   ;;
+	esac
+}
+
+declare -A MAC_ADDR_ORIG
+mac_addr_prepare()
+{
+	local new_addr=
+	local dev=
+
+	for ((i = 1; i <= NUM_NETIFS; ++i)); do
+		dev=${NETIFS[p$i]}
+		new_addr=$(printf "00:01:02:03:04:%02x" $i)
+
+		MAC_ADDR_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].address')
+		# Strip quotes
+		MAC_ADDR_ORIG["$dev"]=${MAC_ADDR_ORIG["$dev"]//\"/}
+		ip link set dev $dev address $new_addr
+	done
+}
+
+mac_addr_restore()
+{
+	local dev=
+
+	for ((i = 1; i <= NUM_NETIFS; ++i)); do
+		dev=${NETIFS[p$i]}
+		ip link set dev $dev address ${MAC_ADDR_ORIG["$dev"]}
+	done
+}
+
+if [[ "$NETIF_CREATE" = "yes" ]]; then
+	create_netif
+fi
+
+if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then
+	mac_addr_prepare
+fi
+
+for ((i = 1; i <= NUM_NETIFS; ++i)); do
+	ip link show dev ${NETIFS[p$i]} &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: could not find all required interfaces"
+		exit $ksft_skip
+	fi
+done
+
+##############################################################################
+# Helpers
+
+# Exit status to return at the end. Set in case one of the tests fails.
+EXIT_STATUS=0
+# Per-test return value. Clear at the beginning of each test.
+RET=0
+
+check_err()
+{
+	local err=$1
+	local msg=$2
+
+	if [[ $RET -eq 0 && $err -ne 0 ]]; then
+		RET=$err
+		retmsg=$msg
+	fi
+}
+
+check_fail()
+{
+	local err=$1
+	local msg=$2
+
+	if [[ $RET -eq 0 && $err -eq 0 ]]; then
+		RET=1
+		retmsg=$msg
+	fi
+}
+
+check_err_fail()
+{
+	local should_fail=$1; shift
+	local err=$1; shift
+	local what=$1; shift
+
+	if ((should_fail)); then
+		check_fail $err "$what succeeded, but should have failed"
+	else
+		check_err $err "$what failed"
+	fi
+}
+
+log_test()
+{
+	local test_name=$1
+	local opt_str=$2
+
+	if [[ $# -eq 2 ]]; then
+		opt_str="($opt_str)"
+	fi
+
+	if [[ $RET -ne 0 ]]; then
+		EXIT_STATUS=1
+		printf "TEST: %-60s  [FAIL]\n" "$test_name $opt_str"
+		if [[ ! -z "$retmsg" ]]; then
+			printf "\t%s\n" "$retmsg"
+		fi
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo "Hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+		return 1
+	fi
+
+	printf "TEST: %-60s  [ OK ]\n" "$test_name $opt_str"
+	return 0
+}
+
+log_test_skip()
+{
+	local test_name=$1
+	local opt_str=$2
+
+	printf "TEST: %-60s  [SKIP]\n" "$test_name $opt_str"
+	return 0
+}
+
+log_info()
+{
+	local msg=$1
+
+	echo "INFO: $msg"
+}
+
+busywait()
+{
+	local timeout=$1; shift
+
+	local start_time="$(date -u +%s%3N)"
+	while true
+	do
+		local out
+		out=$("$@")
+		local ret=$?
+		if ((!ret)); then
+			echo -n "$out"
+			return 0
+		fi
+
+		local current_time="$(date -u +%s%3N)"
+		if ((current_time - start_time > timeout)); then
+			echo -n "$out"
+			return 1
+		fi
+	done
+}
+
+not()
+{
+	"$@"
+	[[ $? != 0 ]]
+}
+
+get_max()
+{
+	local arr=("$@")
+
+	max=${arr[0]}
+	for cur in ${arr[@]}; do
+		if [[ $cur -gt $max ]]; then
+			max=$cur
+		fi
+	done
+
+	echo $max
+}
+
+grep_bridge_fdb()
+{
+	local addr=$1; shift
+	local word
+	local flag
+
+	if [ "$1" == "self" ] || [ "$1" == "master" ]; then
+		word=$1; shift
+		if [ "$1" == "-v" ]; then
+			flag=$1; shift
+		fi
+	fi
+
+	$@ | grep $addr | grep $flag "$word"
+}
+
+wait_for_port_up()
+{
+	"$@" | grep -q "Link detected: yes"
+}
+
+wait_for_offload()
+{
+	"$@" | grep -q offload
+}
+
+wait_for_trap()
+{
+	"$@" | grep -q trap
+}
+
+until_counter_is()
+{
+	local expr=$1; shift
+	local current=$("$@")
+
+	echo $((current))
+	((current $expr))
+}
+
+busywait_for_counter()
+{
+	local timeout=$1; shift
+	local delta=$1; shift
+
+	local base=$("$@")
+	busywait "$timeout" until_counter_is ">= $((base + delta))" "$@"
+}
+
+setup_wait_dev()
+{
+	local dev=$1; shift
+	local wait_time=${1:-$WAIT_TIME}; shift
+
+	setup_wait_dev_with_timeout "$dev" $INTERFACE_TIMEOUT $wait_time
+
+	if (($?)); then
+		check_err 1
+		log_test setup_wait_dev ": Interface $dev does not come up."
+		exit 1
+	fi
+}
+
+setup_wait_dev_with_timeout()
+{
+	local dev=$1; shift
+	local max_iterations=${1:-$WAIT_TIMEOUT}; shift
+	local wait_time=${1:-$WAIT_TIME}; shift
+	local i
+
+	for ((i = 1; i <= $max_iterations; ++i)); do
+		ip link show dev $dev up \
+			| grep 'state UP' &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			sleep 1
+		else
+			sleep $wait_time
+			return 0
+		fi
+	done
+
+	return 1
+}
+
+setup_wait()
+{
+	local num_netifs=${1:-$NUM_NETIFS}
+	local i
+
+	for ((i = 1; i <= num_netifs; ++i)); do
+		setup_wait_dev ${NETIFS[p$i]} 0
+	done
+
+	# Make sure links are ready.
+	sleep $WAIT_TIME
+}
+
+cmd_jq()
+{
+	local cmd=$1
+	local jq_exp=$2
+	local jq_opts=$3
+	local ret
+	local output
+
+	output="$($cmd)"
+	# it the command fails, return error right away
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	output=$(echo $output | jq -r $jq_opts "$jq_exp")
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	echo $output
+	# return success only in case of non-empty output
+	[ ! -z "$output" ]
+}
+
+pre_cleanup()
+{
+	if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
+		echo "Pausing before cleanup, hit any key to continue"
+		read
+	fi
+
+	if [[ "$STABLE_MAC_ADDRS" = "yes" ]]; then
+		mac_addr_restore
+	fi
+}
+
+vrf_prepare()
+{
+	ip -4 rule add pref 32765 table local
+	ip -4 rule del pref 0
+	ip -6 rule add pref 32765 table local
+	ip -6 rule del pref 0
+}
+
+vrf_cleanup()
+{
+	ip -6 rule add pref 0 table local
+	ip -6 rule del pref 32765
+	ip -4 rule add pref 0 table local
+	ip -4 rule del pref 32765
+}
+
+__last_tb_id=0
+declare -A __TB_IDS
+
+__vrf_td_id_assign()
+{
+	local vrf_name=$1
+
+	__last_tb_id=$((__last_tb_id + 1))
+	__TB_IDS[$vrf_name]=$__last_tb_id
+	return $__last_tb_id
+}
+
+__vrf_td_id_lookup()
+{
+	local vrf_name=$1
+
+	return ${__TB_IDS[$vrf_name]}
+}
+
+vrf_create()
+{
+	local vrf_name=$1
+	local tb_id
+
+	__vrf_td_id_assign $vrf_name
+	tb_id=$?
+
+	ip link add dev $vrf_name type vrf table $tb_id
+	ip -4 route add table $tb_id unreachable default metric 4278198272
+	ip -6 route add table $tb_id unreachable default metric 4278198272
+}
+
+vrf_destroy()
+{
+	local vrf_name=$1
+	local tb_id
+
+	__vrf_td_id_lookup $vrf_name
+	tb_id=$?
+
+	ip -6 route del table $tb_id unreachable default metric 4278198272
+	ip -4 route del table $tb_id unreachable default metric 4278198272
+	ip link del dev $vrf_name
+}
+
+__addr_add_del()
+{
+	local if_name=$1
+	local add_del=$2
+	local array
+
+	shift
+	shift
+	array=("${@}")
+
+	for addrstr in "${array[@]}"; do
+		ip address $add_del $addrstr dev $if_name
+	done
+}
+
+__simple_if_init()
+{
+	local if_name=$1; shift
+	local vrf_name=$1; shift
+	local addrs=("${@}")
+
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $if_name up
+
+	__addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+	local if_name=$1; shift
+	local addrs=("${@}")
+
+	__addr_add_del $if_name del "${addrs[@]}"
+
+	ip link set dev $if_name down
+	ip link set dev $if_name nomaster
+}
+
+simple_if_init()
+{
+	local if_name=$1
+	local vrf_name
+	local array
+
+	shift
+	vrf_name=v$if_name
+	array=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	__simple_if_init $if_name $vrf_name "${array[@]}"
+}
+
+simple_if_fini()
+{
+	local if_name=$1
+	local vrf_name
+	local array
+
+	shift
+	vrf_name=v$if_name
+	array=("${@}")
+
+	__simple_if_fini $if_name "${array[@]}"
+	vrf_destroy $vrf_name
+}
+
+tunnel_create()
+{
+	local name=$1; shift
+	local type=$1; shift
+	local local=$1; shift
+	local remote=$1; shift
+
+	ip link add name $name type $type \
+	   local $local remote $remote "$@"
+	ip link set dev $name up
+}
+
+tunnel_destroy()
+{
+	local name=$1; shift
+
+	ip link del dev $name
+}
+
+vlan_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf=$1; shift
+	local ips=("${@}")
+	local name=$if_name.$vid
+
+	ip link add name $name link $if_name type vlan id $vid
+	if [ "$vrf" != "" ]; then
+		ip link set dev $name master $vrf
+	fi
+	ip link set dev $name up
+	__addr_add_del $name add "${ips[@]}"
+}
+
+vlan_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local name=$if_name.$vid
+
+	ip link del dev $name
+}
+
+team_create()
+{
+	local if_name=$1; shift
+	local mode=$1; shift
+
+	require_command $TEAMD
+	$TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+	for slave in "$@"; do
+		ip link set dev $slave down
+		ip link set dev $slave master $if_name
+		ip link set dev $slave up
+	done
+	ip link set dev $if_name up
+}
+
+team_destroy()
+{
+	local if_name=$1; shift
+
+	$TEAMD -t $if_name -k
+}
+
+master_name_get()
+{
+	local if_name=$1
+
+	ip -j link show dev $if_name | jq -r '.[]["master"]'
+}
+
+link_stats_get()
+{
+	local if_name=$1; shift
+	local dir=$1; shift
+	local stat=$1; shift
+
+	ip -j -s link show dev $if_name \
+		| jq '.[]["stats64"]["'$dir'"]["'$stat'"]'
+}
+
+link_stats_tx_packets_get()
+{
+	link_stats_get $1 tx packets
+}
+
+link_stats_rx_errors_get()
+{
+	link_stats_get $1 rx errors
+}
+
+tc_rule_stats_get()
+{
+	local dev=$1; shift
+	local pref=$1; shift
+	local dir=$1; shift
+	local selector=${1:-.packets}; shift
+
+	tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+	    | jq ".[1].options.actions[].stats$selector"
+}
+
+tc_rule_handle_stats_get()
+{
+	local id=$1; shift
+	local handle=$1; shift
+	local selector=${1:-.packets}; shift
+	local netns=${1:-""}; shift
+
+	tc $netns -j -s filter show $id \
+	    | jq ".[] | select(.options.handle == $handle) | \
+		  .options.actions[0].stats$selector"
+}
+
+ethtool_stats_get()
+{
+	local dev=$1; shift
+	local stat=$1; shift
+
+	ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2
+}
+
+ethtool_std_stats_get()
+{
+	local dev=$1; shift
+	local grp=$1; shift
+	local name=$1; shift
+	local src=$1; shift
+
+	ethtool --json -S $dev --groups $grp -- --src $src | \
+		jq '.[]."'"$grp"'"."'$name'"'
+}
+
+qdisc_stats_get()
+{
+	local dev=$1; shift
+	local handle=$1; shift
+	local selector=$1; shift
+
+	tc -j -s qdisc show dev "$dev" \
+	    | jq '.[] | select(.handle == "'"$handle"'") | '"$selector"
+}
+
+qdisc_parent_stats_get()
+{
+	local dev=$1; shift
+	local parent=$1; shift
+	local selector=$1; shift
+
+	tc -j -s qdisc show dev "$dev" invisible \
+	    | jq '.[] | select(.parent == "'"$parent"'") | '"$selector"
+}
+
+ipv6_stats_get()
+{
+	local dev=$1; shift
+	local stat=$1; shift
+
+	cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2
+}
+
+hw_stats_get()
+{
+	local suite=$1; shift
+	local if_name=$1; shift
+	local dir=$1; shift
+	local stat=$1; shift
+
+	ip -j stats show dev $if_name group offload subgroup $suite |
+		jq ".[0].stats64.$dir.$stat"
+}
+
+humanize()
+{
+	local speed=$1; shift
+
+	for unit in bps Kbps Mbps Gbps; do
+		if (($(echo "$speed < 1024" | bc))); then
+			break
+		fi
+
+		speed=$(echo "scale=1; $speed / 1024" | bc)
+	done
+
+	echo "$speed${unit}"
+}
+
+rate()
+{
+	local t0=$1; shift
+	local t1=$1; shift
+	local interval=$1; shift
+
+	echo $((8 * (t1 - t0) / interval))
+}
+
+packets_rate()
+{
+	local t0=$1; shift
+	local t1=$1; shift
+	local interval=$1; shift
+
+	echo $(((t1 - t0) / interval))
+}
+
+mac_get()
+{
+	local if_name=$1
+
+	ip -j link show dev $if_name | jq -r '.[]["address"]'
+}
+
+ipv6_lladdr_get()
+{
+	local if_name=$1
+
+	ip -j addr show dev $if_name | \
+		jq -r '.[]["addr_info"][] | select(.scope == "link").local' | \
+		head -1
+}
+
+bridge_ageing_time_get()
+{
+	local bridge=$1
+	local ageing_time
+
+	# Need to divide by 100 to convert to seconds.
+	ageing_time=$(ip -j -d link show dev $bridge \
+		      | jq '.[]["linkinfo"]["info_data"]["ageing_time"]')
+	echo $((ageing_time / 100))
+}
+
+declare -A SYSCTL_ORIG
+sysctl_set()
+{
+	local key=$1; shift
+	local value=$1; shift
+
+	SYSCTL_ORIG[$key]=$(sysctl -n $key)
+	sysctl -qw $key="$value"
+}
+
+sysctl_restore()
+{
+	local key=$1; shift
+
+	sysctl -qw $key="${SYSCTL_ORIG[$key]}"
+}
+
+forwarding_enable()
+{
+	sysctl_set net.ipv4.conf.all.forwarding 1
+	sysctl_set net.ipv6.conf.all.forwarding 1
+}
+
+forwarding_restore()
+{
+	sysctl_restore net.ipv6.conf.all.forwarding
+	sysctl_restore net.ipv4.conf.all.forwarding
+}
+
+declare -A MTU_ORIG
+mtu_set()
+{
+	local dev=$1; shift
+	local mtu=$1; shift
+
+	MTU_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].mtu')
+	ip link set dev $dev mtu $mtu
+}
+
+mtu_restore()
+{
+	local dev=$1; shift
+
+	ip link set dev $dev mtu ${MTU_ORIG["$dev"]}
+}
+
+tc_offload_check()
+{
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
+		ethtool -k ${NETIFS[p$i]} \
+			| grep "hw-tc-offload: on" &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+trap_install()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	# Some devices may not support or need in-hardware trapping of traffic
+	# (e.g. the veth pairs that this library creates for non-existent
+	# loopbacks). Use continue instead, so that there is a filter in there
+	# (some tests check counters), and so that other filters are still
+	# processed.
+	tc filter add dev $dev $direction pref 1 \
+		flower skip_sw action trap 2>/dev/null \
+	    || tc filter add dev $dev $direction pref 1 \
+		       flower action continue
+}
+
+trap_uninstall()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter del dev $dev $direction pref 1 flower
+}
+
+slow_path_trap_install()
+{
+	# For slow-path testing, we need to install a trap to get to
+	# slow path the packets that would otherwise be switched in HW.
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		trap_install "$@"
+	fi
+}
+
+slow_path_trap_uninstall()
+{
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		trap_uninstall "$@"
+	fi
+}
+
+__icmp_capture_add_del()
+{
+	local add_del=$1; shift
+	local pref=$1; shift
+	local vsuf=$1; shift
+	local tundev=$1; shift
+	local filter=$1; shift
+
+	tc filter $add_del dev "$tundev" ingress \
+	   proto ip$vsuf pref $pref \
+	   flower ip_proto icmp$vsuf $filter \
+	   action pass
+}
+
+icmp_capture_install()
+{
+	__icmp_capture_add_del add 100 "" "$@"
+}
+
+icmp_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 "" "$@"
+}
+
+icmp6_capture_install()
+{
+	__icmp_capture_add_del add 100 v6 "$@"
+}
+
+icmp6_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 v6 "$@"
+}
+
+__vlan_capture_add_del()
+{
+	local add_del=$1; shift
+	local pref=$1; shift
+	local dev=$1; shift
+	local filter=$1; shift
+
+	tc filter $add_del dev "$dev" ingress \
+	   proto 802.1q pref $pref \
+	   flower $filter \
+	   action pass
+}
+
+vlan_capture_install()
+{
+	__vlan_capture_add_del add 100 "$@"
+}
+
+vlan_capture_uninstall()
+{
+	__vlan_capture_add_del del 100 "$@"
+}
+
+__dscp_capture_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local base=$1; shift
+	local dscp;
+
+	for prio in {0..7}; do
+		dscp=$((base + prio))
+		__icmp_capture_add_del $add_del $((dscp + 100)) "" $dev \
+				       "skip_hw ip_tos $((dscp << 2))"
+	done
+}
+
+dscp_capture_install()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del add $dev $base
+}
+
+dscp_capture_uninstall()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del del $dev $base
+}
+
+dscp_fetch_stats()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		local dscp=$((base + prio))
+		local t=$(tc_rule_stats_get $dev $((dscp + 100)))
+		echo "[$dscp]=$t "
+	done
+}
+
+matchall_sink_create()
+{
+	local dev=$1; shift
+
+	tc qdisc add dev $dev clsact
+	tc filter add dev $dev ingress \
+	   pref 10000 \
+	   matchall \
+	   action drop
+}
+
+tests_run()
+{
+	local current_test
+
+	for current_test in ${TESTS:-$ALL_TESTS}; do
+		$current_test
+	done
+}
+
+multipath_eval()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local packets_rp12=$4
+	local packets_rp13=$5
+	local weights_ratio packets_ratio diff
+
+	RET=0
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+				| bc -l)
+	else
+		weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+				| bc -l)
+	fi
+
+	if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+	       check_err 1 "Packet difference is 0"
+	       log_test "Multipath"
+	       log_info "Expected ratio $weights_ratio"
+	       return
+	fi
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+				| bc -l)
+	else
+		packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+				| bc -l)
+	fi
+
+	diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+	diff=${diff#-}
+
+	test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+	check_err $? "Too large discrepancy between expected and measured ratios"
+	log_test "$desc"
+	log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
+in_ns()
+{
+	local name=$1; shift
+
+	ip netns exec $name bash <<-EOF
+		NUM_NETIFS=0
+		source lib.sh
+		$(for a in "$@"; do printf "%q${IFS:0:1}" "$a"; done)
+	EOF
+}
+
+##############################################################################
+# Tests
+
+ping_do()
+{
+	local if_name=$1
+	local dip=$2
+	local args=$3
+	local vrf_name
+
+	vrf_name=$(master_name_get $if_name)
+	ip vrf exec $vrf_name \
+		$PING $args $dip -c $PING_COUNT -i 0.1 \
+		-w $PING_TIMEOUT &> /dev/null
+}
+
+ping_test()
+{
+	RET=0
+
+	ping_do $1 $2
+	check_err $?
+	log_test "ping$3"
+}
+
+ping_test_fails()
+{
+	RET=0
+
+	ping_do $1 $2
+	check_fail $?
+	log_test "ping fails$3"
+}
+
+ping6_do()
+{
+	local if_name=$1
+	local dip=$2
+	local args=$3
+	local vrf_name
+
+	vrf_name=$(master_name_get $if_name)
+	ip vrf exec $vrf_name \
+		$PING6 $args $dip -c $PING_COUNT -i 0.1 \
+		-w $PING_TIMEOUT &> /dev/null
+}
+
+ping6_test()
+{
+	RET=0
+
+	ping6_do $1 $2
+	check_err $?
+	log_test "ping6$3"
+}
+
+ping6_test_fails()
+{
+	RET=0
+
+	ping6_do $1 $2
+	check_fail $?
+	log_test "ping6 fails$3"
+}
+
+learning_test()
+{
+	local bridge=$1
+	local br_port1=$2	# Connected to `host1_if`.
+	local host1_if=$3
+	local host2_if=$4
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	RET=0
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	# Disable unknown unicast flooding on `br_port1` to make sure
+	# packets are only forwarded through the port after a matching
+	# FDB entry was installed.
+	bridge link set dev $br_port1 flood off
+
+	ip link set $host1_if promisc on
+	tc qdisc add dev $host1_if ingress
+	tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \
+		flower dst_mac $mac action drop
+
+	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host1_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	check_fail $? "Packet reached first host when should not"
+
+	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
+	sleep 1
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_err $? "Did not find FDB record when should"
+
+	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host1_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	check_err $? "Packet did not reach second host when should"
+
+	# Wait for 10 seconds after the ageing time to make sure FDB
+	# record was aged-out.
+	ageing_time=$(bridge_ageing_time_get $bridge)
+	sleep $((ageing_time + 10))
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	bridge link set dev $br_port1 learning off
+
+	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
+	sleep 1
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	bridge link set dev $br_port1 learning on
+
+	tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host1_if ingress
+	ip link set $host1_if promisc off
+
+	bridge link set dev $br_port1 flood on
+
+	log_test "FDB learning"
+}
+
+flood_test_do()
+{
+	local should_flood=$1
+	local mac=$2
+	local ip=$3
+	local host1_if=$4
+	local host2_if=$5
+	local err=0
+
+	# Add an ACL on `host2_if` which will tell us whether the packet
+	# was flooded to it or not.
+	ip link set $host2_if promisc on
+	tc qdisc add dev $host2_if ingress
+	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
+		flower dst_mac $mac action drop
+
+	$MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host2_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	if [[ $? -ne 0 && $should_flood == "true" || \
+	      $? -eq 0 && $should_flood == "false" ]]; then
+		err=1
+	fi
+
+	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host2_if ingress
+	ip link set $host2_if promisc off
+
+	return $err
+}
+
+flood_unicast_test()
+{
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+	local mac=de:ad:be:ef:13:37
+	local ip=192.0.2.100
+
+	RET=0
+
+	bridge link set dev $br_port flood off
+
+	flood_test_do false $mac $ip $host1_if $host2_if
+	check_err $? "Packet flooded when should not"
+
+	bridge link set dev $br_port flood on
+
+	flood_test_do true $mac $ip $host1_if $host2_if
+	check_err $? "Packet was not flooded when should"
+
+	log_test "Unknown unicast flood"
+}
+
+flood_multicast_test()
+{
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+	local mac=01:00:5e:00:00:01
+	local ip=239.0.0.1
+
+	RET=0
+
+	bridge link set dev $br_port mcast_flood off
+
+	flood_test_do false $mac $ip $host1_if $host2_if
+	check_err $? "Packet flooded when should not"
+
+	bridge link set dev $br_port mcast_flood on
+
+	flood_test_do true $mac $ip $host1_if $host2_if
+	check_err $? "Packet was not flooded when should"
+
+	log_test "Unregistered multicast flood"
+}
+
+flood_test()
+{
+	# `br_port` is connected to `host2_if`
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+
+	flood_unicast_test $br_port $host1_if $host2_if
+	flood_multicast_test $br_port $host1_if $host2_if
+}
+
+__start_traffic()
+{
+	local pktsize=$1; shift
+	local proto=$1; shift
+	local h_in=$1; shift    # Where the traffic egresses the host
+	local sip=$1; shift
+	local dip=$1; shift
+	local dmac=$1; shift
+
+	$MZ $h_in -p $pktsize -A $sip -B $dip -c 0 \
+		-a own -b $dmac -t "$proto" -q "$@" &
+	sleep 1
+}
+
+start_traffic_pktsize()
+{
+	local pktsize=$1; shift
+
+	__start_traffic $pktsize udp "$@"
+}
+
+start_tcp_traffic_pktsize()
+{
+	local pktsize=$1; shift
+
+	__start_traffic $pktsize tcp "$@"
+}
+
+start_traffic()
+{
+	start_traffic_pktsize 8000 "$@"
+}
+
+start_tcp_traffic()
+{
+	start_tcp_traffic_pktsize 8000 "$@"
+}
+
+stop_traffic()
+{
+	# Suppress noise from killing mausezahn.
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+declare -A cappid
+declare -A capfile
+declare -A capout
+
+tcpdump_start()
+{
+	local if_name=$1; shift
+	local ns=$1; shift
+
+	capfile[$if_name]=$(mktemp)
+	capout[$if_name]=$(mktemp)
+
+	if [ -z $ns ]; then
+		ns_cmd=""
+	else
+		ns_cmd="ip netns exec ${ns}"
+	fi
+
+	if [ -z $SUDO_USER ] ; then
+		capuser=""
+	else
+		capuser="-Z $SUDO_USER"
+	fi
+
+	$ns_cmd tcpdump $TCPDUMP_EXTRA_FLAGS -e -n -Q in -i $if_name \
+		-s 65535 -B 32768 $capuser -w ${capfile[$if_name]} \
+		> "${capout[$if_name]}" 2>&1 &
+	cappid[$if_name]=$!
+
+	sleep 1
+}
+
+tcpdump_stop()
+{
+	local if_name=$1
+	local pid=${cappid[$if_name]}
+
+	$ns_cmd kill "$pid" && wait "$pid"
+	sleep 1
+}
+
+tcpdump_cleanup()
+{
+	local if_name=$1
+
+	rm ${capfile[$if_name]} ${capout[$if_name]}
+}
+
+tcpdump_show()
+{
+	local if_name=$1
+
+	tcpdump -e -n -r ${capfile[$if_name]} 2>&1
+}
+
+# return 0 if the packet wasn't seen on host2_if or 1 if it was
+mcast_packet_test()
+{
+	local mac=$1
+	local src_ip=$2
+	local ip=$3
+	local host1_if=$4
+	local host2_if=$5
+	local seen=0
+	local tc_proto="ip"
+	local mz_v6arg=""
+
+	# basic check to see if we were passed an IPv4 address, if not assume IPv6
+	if [[ ! $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
+		tc_proto="ipv6"
+		mz_v6arg="-6"
+	fi
+
+	# Add an ACL on `host2_if` which will tell us whether the packet
+	# was received by it or not.
+	tc qdisc add dev $host2_if ingress
+	tc filter add dev $host2_if ingress protocol $tc_proto pref 1 handle 101 \
+		flower ip_proto udp dst_mac $mac action drop
+
+	$MZ $host1_if $mz_v6arg -c 1 -p 64 -b $mac -A $src_ip -B $ip -t udp "dp=4096,sp=2048" -q
+	sleep 1
+
+	tc -j -s filter show dev $host2_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	if [[ $? -eq 0 ]]; then
+		seen=1
+	fi
+
+	tc filter del dev $host2_if ingress protocol $tc_proto pref 1 handle 101 flower
+	tc qdisc del dev $host2_if ingress
+
+	return $seen
+}
+
+brmcast_check_sg_entries()
+{
+	local report=$1; shift
+	local slist=("$@")
+	local sarg=""
+
+	for src in "${slist[@]}"; do
+		sarg="${sarg} and .source_list[].address == \"$src\""
+	done
+	bridge -j -d -s mdb show dev br0 \
+		| jq -e ".[].mdb[] | \
+			 select(.grp == \"$TEST_GROUP\" and .source_list != null $sarg)" &>/dev/null
+	check_err $? "Wrong *,G entry source list after $report report"
+
+	for sgent in "${slist[@]}"; do
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .src == \"$sgent\")" &>/dev/null
+		check_err $? "Missing S,G entry ($sgent, $TEST_GROUP)"
+	done
+}
+
+brmcast_check_sg_fwding()
+{
+	local should_fwd=$1; shift
+	local sources=("$@")
+
+	for src in "${sources[@]}"; do
+		local retval=0
+
+		mcast_packet_test $TEST_GROUP_MAC $src $TEST_GROUP $h2 $h1
+		retval=$?
+		if [ $should_fwd -eq 1 ]; then
+			check_fail $retval "Didn't forward traffic from S,G ($src, $TEST_GROUP)"
+		else
+			check_err $retval "Forwarded traffic for blocked S,G ($src, $TEST_GROUP)"
+		fi
+	done
+}
+
+brmcast_check_sg_state()
+{
+	local is_blocked=$1; shift
+	local sources=("$@")
+	local should_fail=1
+
+	if [ $is_blocked -eq 1 ]; then
+		should_fail=0
+	fi
+
+	for src in "${sources[@]}"; do
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .source_list != null) |
+				 .source_list[] |
+				 select(.address == \"$src\") |
+				 select(.timer == \"0.00\")" &>/dev/null
+		check_err_fail $should_fail $? "Entry $src has zero timer"
+
+		bridge -j -d -s mdb show dev br0 \
+			| jq -e ".[].mdb[] | \
+				 select(.grp == \"$TEST_GROUP\" and .src == \"$src\" and \
+				 .flags[] == \"blocked\")" &>/dev/null
+		check_err_fail $should_fail $? "Entry $src has blocked flag"
+	done
+}
+
+mc_join()
+{
+	local if_name=$1
+	local group=$2
+	local vrf_name=$(master_name_get $if_name)
+
+	# We don't care about actual reception, just about joining the
+	# IP multicast group and adding the L2 address to the device's
+	# MAC filtering table
+	ip vrf exec $vrf_name \
+		mreceive -g $group -I $if_name > /dev/null 2>&1 &
+	mreceive_pid=$!
+
+	sleep 1
+}
+
+mc_leave()
+{
+	kill "$mreceive_pid" && wait "$mreceive_pid"
+}
+
+mc_send()
+{
+	local if_name=$1
+	local groups=$2
+	local vrf_name=$(master_name_get $if_name)
+
+	ip vrf exec $vrf_name \
+		msend -g $groups -I $if_name -c 1 > /dev/null 2>&1
+}
+
+start_ip_monitor()
+{
+	local mtype=$1; shift
+	local ip=${1-ip}; shift
+
+	# start the monitor in the background
+	tmpfile=`mktemp /var/run/nexthoptestXXX`
+	mpid=`($ip monitor $mtype > $tmpfile & echo $!) 2>/dev/null`
+	sleep 0.2
+	echo "$mpid $tmpfile"
+}
+
+stop_ip_monitor()
+{
+	local mpid=$1; shift
+	local tmpfile=$1; shift
+	local el=$1; shift
+	local what=$1; shift
+
+	sleep 0.2
+	kill $mpid
+	local lines=`grep '^\w' $tmpfile | wc -l`
+	test $lines -eq $el
+	check_err $? "$what: $lines lines of events, expected $el"
+	rm -rf $tmpfile
+}
+
+hw_stats_monitor_test()
+{
+	local dev=$1; shift
+	local type=$1; shift
+	local make_suitable=$1; shift
+	local make_unsuitable=$1; shift
+	local ip=${1-ip}; shift
+
+	RET=0
+
+	# Expect a notification about enablement.
+	local ipmout=$(start_ip_monitor stats "$ip")
+	$ip stats set dev $dev ${type}_stats on
+	stop_ip_monitor $ipmout 1 "${type}_stats enablement"
+
+	# Expect a notification about offload.
+	local ipmout=$(start_ip_monitor stats "$ip")
+	$make_suitable
+	stop_ip_monitor $ipmout 1 "${type}_stats installation"
+
+	# Expect a notification about loss of offload.
+	local ipmout=$(start_ip_monitor stats "$ip")
+	$make_unsuitable
+	stop_ip_monitor $ipmout 1 "${type}_stats deinstallation"
+
+	# Expect a notification about disablement
+	local ipmout=$(start_ip_monitor stats "$ip")
+	$ip stats set dev $dev ${type}_stats off
+	stop_ip_monitor $ipmout 1 "${type}_stats disablement"
+
+	log_test "${type}_stats notifications"
+}
+
+ipv4_to_bytes()
+{
+	local IP=$1; shift
+
+	printf '%02x:' ${IP//./ } |
+	    sed 's/:$//'
+}
+
+# Convert a given IPv6 address, `IP' such that the :: token, if present, is
+# expanded, and each 16-bit group is padded with zeroes to be 4 hexadecimal
+# digits. An optional `BYTESEP' parameter can be given to further separate
+# individual bytes of each 16-bit group.
+expand_ipv6()
+{
+	local IP=$1; shift
+	local bytesep=$1; shift
+
+	local cvt_ip=${IP/::/_}
+	local colons=${cvt_ip//[^:]/}
+	local allcol=:::::::
+	# IP where :: -> the appropriate number of colons:
+	local allcol_ip=${cvt_ip/_/${allcol:${#colons}}}
+
+	echo $allcol_ip | tr : '\n' |
+	    sed s/^/0000/ |
+	    sed 's/.*\(..\)\(..\)/\1'"$bytesep"'\2/' |
+	    tr '\n' : |
+	    sed 's/:$//'
+}
+
+ipv6_to_bytes()
+{
+	local IP=$1; shift
+
+	expand_ipv6 "$IP" :
+}
+
+u16_to_bytes()
+{
+	local u16=$1; shift
+
+	printf "%04x" $u16 | sed 's/^/000/;s/^.*\(..\)\(..\)$/\1:\2/'
+}
+
+# Given a mausezahn-formatted payload (colon-separated bytes given as %02x),
+# possibly with a keyword CHECKSUM stashed where a 16-bit checksum should be,
+# calculate checksum as per RFC 1071, assuming the CHECKSUM field (if any)
+# stands for 00:00.
+payload_template_calc_checksum()
+{
+	local payload=$1; shift
+
+	(
+	    # Set input radix.
+	    echo "16i"
+	    # Push zero for the initial checksum.
+	    echo 0
+
+	    # Pad the payload with a terminating 00: in case we get an odd
+	    # number of bytes.
+	    echo "${payload%:}:00:" |
+		sed 's/CHECKSUM/00:00/g' |
+		tr '[:lower:]' '[:upper:]' |
+		# Add the word to the checksum.
+		sed 's/\(..\):\(..\):/\1\2+\n/g' |
+		# Strip the extra odd byte we pushed if left unconverted.
+		sed 's/\(..\):$//'
+
+	    echo "10000 ~ +"	# Calculate and add carry.
+	    echo "FFFF r - p"	# Bit-flip and print.
+	) |
+	    dc |
+	    tr '[:upper:]' '[:lower:]'
+}
+
+payload_template_expand_checksum()
+{
+	local payload=$1; shift
+	local checksum=$1; shift
+
+	local ckbytes=$(u16_to_bytes $checksum)
+
+	echo "$payload" | sed "s/CHECKSUM/$ckbytes/g"
+}
+
+payload_template_nbytes()
+{
+	local payload=$1; shift
+
+	payload_template_expand_checksum "${payload%:}" 0 |
+		sed 's/:/\n/g' | wc -l
+}
+
+igmpv3_is_in_get()
+{
+	local GRP=$1; shift
+	local sources=("$@")
+
+	local igmpv3
+	local nsources=$(u16_to_bytes ${#sources[@]})
+
+	# IS_IN ( $sources )
+	igmpv3=$(:
+		)"22:"$(			: Type - Membership Report
+		)"00:"$(			: Reserved
+		)"CHECKSUM:"$(			: Checksum
+		)"00:00:"$(			: Reserved
+		)"00:01:"$(			: Number of Group Records
+		)"01:"$(			: Record Type - IS_IN
+		)"00:"$(			: Aux Data Len
+		)"${nsources}:"$(		: Number of Sources
+		)"$(ipv4_to_bytes $GRP):"$(	: Multicast Address
+		)"$(for src in "${sources[@]}"; do
+			ipv4_to_bytes $src
+			echo -n :
+		    done)"$(			: Source Addresses
+		)
+	local checksum=$(payload_template_calc_checksum "$igmpv3")
+
+	payload_template_expand_checksum "$igmpv3" $checksum
+}
+
+igmpv2_leave_get()
+{
+	local GRP=$1; shift
+
+	local payload=$(:
+		)"17:"$(			: Type - Leave Group
+		)"00:"$(			: Max Resp Time - not meaningful
+		)"CHECKSUM:"$(			: Checksum
+		)"$(ipv4_to_bytes $GRP)"$(	: Group Address
+		)
+	local checksum=$(payload_template_calc_checksum "$payload")
+
+	payload_template_expand_checksum "$payload" $checksum
+}
+
+mldv2_is_in_get()
+{
+	local SIP=$1; shift
+	local GRP=$1; shift
+	local sources=("$@")
+
+	local hbh
+	local icmpv6
+	local nsources=$(u16_to_bytes ${#sources[@]})
+
+	hbh=$(:
+		)"3a:"$(			: Next Header - ICMPv6
+		)"00:"$(			: Hdr Ext Len
+		)"00:00:00:00:00:00:"$(		: Options and Padding
+		)
+
+	icmpv6=$(:
+		)"8f:"$(			: Type - MLDv2 Report
+		)"00:"$(			: Code
+		)"CHECKSUM:"$(			: Checksum
+		)"00:00:"$(			: Reserved
+		)"00:01:"$(			: Number of Group Records
+		)"01:"$(			: Record Type - IS_IN
+		)"00:"$(			: Aux Data Len
+		)"${nsources}:"$(		: Number of Sources
+		)"$(ipv6_to_bytes $GRP):"$(	: Multicast address
+		)"$(for src in "${sources[@]}"; do
+			ipv6_to_bytes $src
+			echo -n :
+		    done)"$(			: Source Addresses
+		)
+
+	local len=$(u16_to_bytes $(payload_template_nbytes $icmpv6))
+	local sudohdr=$(:
+		)"$(ipv6_to_bytes $SIP):"$(	: SIP
+		)"$(ipv6_to_bytes $GRP):"$(	: DIP is multicast address
+	        )"${len}:"$(			: Upper-layer length
+	        )"00:3a:"$(			: Zero and next-header
+	        )
+	local checksum=$(payload_template_calc_checksum ${sudohdr}${icmpv6})
+
+	payload_template_expand_checksum "$hbh$icmpv6" $checksum
+}
+
+mldv1_done_get()
+{
+	local SIP=$1; shift
+	local GRP=$1; shift
+
+	local hbh
+	local icmpv6
+
+	hbh=$(:
+		)"3a:"$(			: Next Header - ICMPv6
+		)"00:"$(			: Hdr Ext Len
+		)"00:00:00:00:00:00:"$(		: Options and Padding
+		)
+
+	icmpv6=$(:
+		)"84:"$(			: Type - MLDv1 Done
+		)"00:"$(			: Code
+		)"CHECKSUM:"$(			: Checksum
+		)"00:00:"$(			: Max Resp Delay - not meaningful
+		)"00:00:"$(			: Reserved
+		)"$(ipv6_to_bytes $GRP):"$(	: Multicast address
+		)
+
+	local len=$(u16_to_bytes $(payload_template_nbytes $icmpv6))
+	local sudohdr=$(:
+		)"$(ipv6_to_bytes $SIP):"$(	: SIP
+		)"$(ipv6_to_bytes $GRP):"$(	: DIP is multicast address
+	        )"${len}:"$(			: Upper-layer length
+	        )"00:3a:"$(			: Zero and next-header
+	        )
+	local checksum=$(payload_template_calc_checksum ${sudohdr}${icmpv6})
+
+	payload_template_expand_checksum "$hbh$icmpv6" $checksum
+}
+
+bail_on_lldpad()
+{
+	local reason1="$1"; shift
+	local reason2="$1"; shift
+
+	if systemctl is-active --quiet lldpad; then
+
+		cat >/dev/stderr <<-EOF
+		WARNING: lldpad is running
+
+			lldpad will likely $reason1, and this test will
+			$reason2. Both are not supported at the same time,
+			one of them is arbitrarily going to overwrite the
+			other. That will cause spurious failures (or, unlikely,
+			passes) of this test.
+		EOF
+
+		if [[ -z $ALLOW_LLDPAD ]]; then
+			cat >/dev/stderr <<-EOF
+
+				If you want to run the test anyway, please set
+				an environment variable ALLOW_LLDPAD to a
+				non-empty string.
+			EOF
+			exit 1
+		else
+			return
+		fi
+	fi
+}
diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh
new file mode 100755
index 0000000000..c5b0cbc85b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/local_termination.sh
@@ -0,0 +1,299 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="standalone bridge"
+NUM_NETIFS=2
+PING_COUNT=1
+REQUIRE_MTOOLS=yes
+REQUIRE_MZ=no
+
+source lib.sh
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+BRIDGE_ADDR="00:00:de:ad:be:ee"
+MACVLAN_ADDR="00:00:de:ad:be:ef"
+UNKNOWN_UC_ADDR1="de:ad:be:ef:ee:03"
+UNKNOWN_UC_ADDR2="de:ad:be:ef:ee:04"
+UNKNOWN_UC_ADDR3="de:ad:be:ef:ee:05"
+JOINED_IPV4_MC_ADDR="225.1.2.3"
+UNKNOWN_IPV4_MC_ADDR1="225.1.2.4"
+UNKNOWN_IPV4_MC_ADDR2="225.1.2.5"
+UNKNOWN_IPV4_MC_ADDR3="225.1.2.6"
+JOINED_IPV6_MC_ADDR="ff2e::0102:0304"
+UNKNOWN_IPV6_MC_ADDR1="ff2e::0102:0305"
+UNKNOWN_IPV6_MC_ADDR2="ff2e::0102:0306"
+UNKNOWN_IPV6_MC_ADDR3="ff2e::0102:0307"
+
+JOINED_MACV4_MC_ADDR="01:00:5e:01:02:03"
+UNKNOWN_MACV4_MC_ADDR1="01:00:5e:01:02:04"
+UNKNOWN_MACV4_MC_ADDR2="01:00:5e:01:02:05"
+UNKNOWN_MACV4_MC_ADDR3="01:00:5e:01:02:06"
+JOINED_MACV6_MC_ADDR="33:33:01:02:03:04"
+UNKNOWN_MACV6_MC_ADDR1="33:33:01:02:03:05"
+UNKNOWN_MACV6_MC_ADDR2="33:33:01:02:03:06"
+UNKNOWN_MACV6_MC_ADDR3="33:33:01:02:03:07"
+
+NON_IP_MC="01:02:03:04:05:06"
+NON_IP_PKT="00:04 48:45:4c:4f"
+BC="ff:ff:ff:ff:ff:ff"
+
+# Disable promisc to ensure we don't receive unknown MAC DA packets
+export TCPDUMP_EXTRA_FLAGS="-pl"
+
+h1=${NETIFS[p1]}
+h2=${NETIFS[p2]}
+
+send_non_ip()
+{
+	local if_name=$1
+	local smac=$2
+	local dmac=$3
+
+	$MZ -q $if_name "$dmac $smac $NON_IP_PKT"
+}
+
+send_uc_ipv4()
+{
+	local if_name=$1
+	local dmac=$2
+
+	ip neigh add $H2_IPV4 lladdr $dmac dev $if_name
+	ping_do $if_name $H2_IPV4
+	ip neigh del $H2_IPV4 dev $if_name
+}
+
+check_rcv()
+{
+	local if_name=$1
+	local type=$2
+	local pattern=$3
+	local should_receive=$4
+	local should_fail=
+
+	[ $should_receive = true ] && should_fail=0 || should_fail=1
+	RET=0
+
+	tcpdump_show $if_name | grep -q "$pattern"
+
+	check_err_fail "$should_fail" "$?" "reception"
+
+	log_test "$if_name: $type"
+}
+
+mc_route_prepare()
+{
+	local if_name=$1
+	local vrf_name=$(master_name_get $if_name)
+
+	ip route add 225.100.1.0/24 dev $if_name vrf $vrf_name
+	ip -6 route add ff2e::/64 dev $if_name vrf $vrf_name
+}
+
+mc_route_destroy()
+{
+	local if_name=$1
+	local vrf_name=$(master_name_get $if_name)
+
+	ip route del 225.100.1.0/24 dev $if_name vrf $vrf_name
+	ip -6 route del ff2e::/64 dev $if_name vrf $vrf_name
+}
+
+run_test()
+{
+	local rcv_if_name=$1
+	local smac=$(mac_get $h1)
+	local rcv_dmac=$(mac_get $rcv_if_name)
+
+	tcpdump_start $rcv_if_name
+
+	mc_route_prepare $h1
+	mc_route_prepare $rcv_if_name
+
+	send_uc_ipv4 $h1 $rcv_dmac
+	send_uc_ipv4 $h1 $MACVLAN_ADDR
+	send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR1
+
+	ip link set dev $rcv_if_name promisc on
+	send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR2
+	mc_send $h1 $UNKNOWN_IPV4_MC_ADDR2
+	mc_send $h1 $UNKNOWN_IPV6_MC_ADDR2
+	ip link set dev $rcv_if_name promisc off
+
+	mc_join $rcv_if_name $JOINED_IPV4_MC_ADDR
+	mc_send $h1 $JOINED_IPV4_MC_ADDR
+	mc_leave
+
+	mc_join $rcv_if_name $JOINED_IPV6_MC_ADDR
+	mc_send $h1 $JOINED_IPV6_MC_ADDR
+	mc_leave
+
+	mc_send $h1 $UNKNOWN_IPV4_MC_ADDR1
+	mc_send $h1 $UNKNOWN_IPV6_MC_ADDR1
+
+	ip link set dev $rcv_if_name allmulticast on
+	send_uc_ipv4 $h1 $UNKNOWN_UC_ADDR3
+	mc_send $h1 $UNKNOWN_IPV4_MC_ADDR3
+	mc_send $h1 $UNKNOWN_IPV6_MC_ADDR3
+	ip link set dev $rcv_if_name allmulticast off
+
+	mc_route_destroy $rcv_if_name
+	mc_route_destroy $h1
+
+	sleep 1
+
+	tcpdump_stop $rcv_if_name
+
+	check_rcv $rcv_if_name "Unicast IPv4 to primary MAC address" \
+		"$smac > $rcv_dmac, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Unicast IPv4 to macvlan MAC address" \
+		"$smac > $MACVLAN_ADDR, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address" \
+		"$smac > $UNKNOWN_UC_ADDR1, ethertype IPv4 (0x0800)" \
+		false
+
+	check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, promisc" \
+		"$smac > $UNKNOWN_UC_ADDR2, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, allmulti" \
+		"$smac > $UNKNOWN_UC_ADDR3, ethertype IPv4 (0x0800)" \
+		false
+
+	check_rcv $rcv_if_name "Multicast IPv4 to joined group" \
+		"$smac > $JOINED_MACV4_MC_ADDR, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Multicast IPv4 to unknown group" \
+		"$smac > $UNKNOWN_MACV4_MC_ADDR1, ethertype IPv4 (0x0800)" \
+		false
+
+	check_rcv $rcv_if_name "Multicast IPv4 to unknown group, promisc" \
+		"$smac > $UNKNOWN_MACV4_MC_ADDR2, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Multicast IPv4 to unknown group, allmulti" \
+		"$smac > $UNKNOWN_MACV4_MC_ADDR3, ethertype IPv4 (0x0800)" \
+		true
+
+	check_rcv $rcv_if_name "Multicast IPv6 to joined group" \
+		"$smac > $JOINED_MACV6_MC_ADDR, ethertype IPv6 (0x86dd)" \
+		true
+
+	check_rcv $rcv_if_name "Multicast IPv6 to unknown group" \
+		"$smac > $UNKNOWN_MACV6_MC_ADDR1, ethertype IPv6 (0x86dd)" \
+		false
+
+	check_rcv $rcv_if_name "Multicast IPv6 to unknown group, promisc" \
+		"$smac > $UNKNOWN_MACV6_MC_ADDR2, ethertype IPv6 (0x86dd)" \
+		true
+
+	check_rcv $rcv_if_name "Multicast IPv6 to unknown group, allmulti" \
+		"$smac > $UNKNOWN_MACV6_MC_ADDR3, ethertype IPv6 (0x86dd)" \
+		true
+
+	tcpdump_cleanup $rcv_if_name
+}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+bridge_create()
+{
+	ip link add br0 type bridge
+	ip link set br0 address $BRIDGE_ADDR
+	ip link set br0 up
+
+	ip link set $h2 master br0
+	ip link set $h2 up
+
+	simple_if_init br0 $H2_IPV4/24 $H2_IPV6/64
+}
+
+bridge_destroy()
+{
+	simple_if_fini br0 $H2_IPV4/24 $H2_IPV6/64
+
+	ip link del br0
+}
+
+standalone()
+{
+	h1_create
+	h2_create
+
+	ip link add link $h2 name macvlan0 type macvlan mode private
+	ip link set macvlan0 address $MACVLAN_ADDR
+	ip link set macvlan0 up
+
+	run_test $h2
+
+	ip link del macvlan0
+
+	h2_destroy
+	h1_destroy
+}
+
+bridge()
+{
+	h1_create
+	bridge_create
+
+	ip link add link br0 name macvlan0 type macvlan mode private
+	ip link set macvlan0 address $MACVLAN_ADDR
+	ip link set macvlan0 up
+
+	run_test br0
+
+	ip link del macvlan0
+
+	bridge_destroy
+	h1_destroy
+}
+
+cleanup()
+{
+	pre_cleanup
+	vrf_cleanup
+}
+
+setup_prepare()
+{
+	vrf_prepare
+	# setup_wait() needs this
+	ip link set $h1 up
+	ip link set $h2 up
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/loopback.sh b/tools/testing/selftests/net/forwarding/loopback.sh
new file mode 100755
index 0000000000..8f4057310b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/loopback.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+ALL_TESTS="loopback_test"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2
+}
+
+loopback_test()
+{
+	RET=0
+
+	tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \
+		skip_hw arp_op reply arp_tip 192.0.2.1 action drop
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 1
+	check_fail $? "Matched on a filter without loopback setup"
+
+	ethtool -K $h1 loopback on
+	check_err $? "Failed to enable loopback"
+
+	setup_wait_dev $h1
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 1
+	check_err $? "Did not match on filter with loopback"
+
+	ethtool -K $h1 loopback off
+	check_err $? "Failed to disable loopback"
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 2
+	check_fail $? "Matched on a filter after loopback was removed"
+
+	tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower
+
+	log_test "loopback"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	if ethtool -k $h1 | grep loopback | grep -q fixed; then
+		log_test "SKIP: dev $h1 does not support loopback feature"
+		exit $ksft_skip
+	fi
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre.sh b/tools/testing/selftests/net/forwarding/mirror_gre.sh
new file mode 100755
index 0000000000..0266443601
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" when the device to mirror to is a
+# gretap or ip6gretap netdevice. Expect that the packets come out encapsulated,
+# and another gretap / ip6gretap netdevice is then capable of decapsulating the
+# traffic. Test that the payload is what is expected (ICMP ping request or
+# reply, depending on test).
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_mac
+	test_ip6gretap_mac
+	test_two_spans
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_mac()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local what=$1; shift
+
+	case "$direction" in
+	ingress) local src_mac=$(mac_get $h1); local dst_mac=$(mac_get $h2)
+		;;
+	egress) local src_mac=$(mac_get $h2); local dst_mac=$(mac_get $h1)
+		;;
+	esac
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	icmp_capture_install h3-${tundev} "src_mac $src_mac dst_mac $dst_mac"
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 h3-${tundev} 100 10
+
+	icmp_capture_uninstall h3-${tundev}
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: envelope MAC ($tcflags)"
+}
+
+test_two_spans()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_install $swp1 egress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	fail_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_uninstall $swp1 egress
+	quick_test_span_gre_dir gt4 ingress
+	fail_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	log_test "two simultaneously configured mirrors ($tcflags)"
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+test_gretap_mac()
+{
+	test_span_gre_mac gt4 ingress "mirror to gretap"
+	test_span_gre_mac gt4 egress "mirror to gretap"
+}
+
+test_ip6gretap_mac()
+{
+	test_span_gre_mac gt6 ingress "mirror to ip6gretap"
+	test_span_gre_mac gt6 egress "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh
new file mode 100755
index 0000000000..6c257ec037
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh
@@ -0,0 +1,227 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   | +---------------------------------------------------------------------+ |
+#   | | OL                      + gt6 (ip6gretap)      + gt4 (gretap)       | |
+#   | |                         : loc=2001:db8:2::1    : loc=192.0.2.129    | |
+#   | |                         : rem=2001:db8:2::2    : rem=192.0.2.130    | |
+#   | |                         : ttl=100              : ttl=100            | |
+#   | |                         : tos=inherit          : tos=inherit        | |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   |                           :  |                   :  |                   |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   | | UL                      :  |,---------------------'                 | |
+#   | |   + $swp3               :  ||                  :                    | |
+#   | |   | 192.0.2.129/28      :  vv                  :                    | |
+#   | |   | 2001:db8:2::1/64    :  + ul (dummy)        :                    | |
+#   | +---|---------------------:----------------------:--------------------+ |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+#
+# This tests mirroring to gretap and ip6gretap configured in an overlay /
+# underlay manner, i.e. with a bound dummy device that marks underlay VRF where
+# the encapsulated packed should be routed.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28 2001:db8:2::2/64
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	simple_if_fini $h3 192.0.2.130/28 2001:db8:2::2/64
+}
+
+switch_create()
+{
+	# Bridge between H1 and H2.
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 addrgenmode none
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+
+	# Underlay.
+
+	simple_if_init $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link add name ul type dummy
+	ip link set dev ul master v$swp3
+	ip link set dev ul up
+
+	# Overlay.
+
+	vrf_create vrf-ol
+	ip link set dev vrf-ol up
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit dev ul
+	ip link set dev gt4 master vrf-ol
+	ip link set dev gt4 up
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit dev ul allow-localremote
+	ip link set dev gt6 master vrf-ol
+	ip link set dev gt6 up
+}
+
+switch_destroy()
+{
+	vrf_destroy vrf-ol
+
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	simple_if_fini $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link del dev ul
+
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap w/ UL"
+	full_test_span_gre_dir gt4 egress  0 8 "mirror to gretap w/ UL"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap w/ UL"
+	full_test_span_gre_dir gt6 egress  0 8 "mirror to ip6gretap w/ UL"
+}
+
+test_all()
+{
+	RET=0
+
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
new file mode 100755
index 0000000000..04fd14b0a9
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device without vlan filtering (802.1d).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                             +---------------------+
+#  | H1                  |                             |                  H2 |
+#  |     + $h1           |                             |           $h2 +     |
+#  |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#  +-----|---------------+                             +---------------|-----+
+#        |                                                             |
+#  +-----|-------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                  |     |
+#  | +---|-------------------------------------------------------------|---+ |
+#  | |   + $swp1            + br1 (802.1q bridge)                $swp2 +   | |
+#  | +---------------------------------------------------------------------+ |
+#  |                                                                         |
+#  | +---------------------------------------------------------------------+ |
+#  | |                      + br2 (802.1d bridge)                          | |
+#  | |                        192.0.2.129/28                               | |
+#  | |   + $swp3              2001:db8:2::1/64                             | |
+#  | +---|-----------------------------------------------------------------+ |
+#  |     |                                          ^                    ^   |
+#  |     |                     + gt6 (ip6gretap)    | + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  | : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+ : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100              : ttl=100              |
+#  |     |                     : tos=inherit          : tos=inherit          |
+#  +-----|---------------------:----------------------:----------------------+
+#        |                     :                      :
+#  +-----|---------------------:----------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)    + h3-gt4 (gretap)      |
+#  |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#  |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#  |                             ttl=100                ttl=100              |
+#  |                             tos=inherit            tos=inherit          |
+#  +-------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name br2 address $(mac_get $swp3) \
+		type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link set dev $swp3 master br2
+	ip route add 192.0.2.130/32 dev br2
+	ip -6 route add 2001:db8:2::2/128 dev br2
+
+	ip address add dev br2 192.0.2.129/28
+	ip address add dev br2 2001:db8:2::1/64
+
+	ip address add dev $h3 192.0.2.130/28
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $h3 192.0.2.130/28
+	ip link del dev br2
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	ip neigh replace 192.0.2.130 lladdr $(mac_get $h3) \
+		 nud permanent dev br2
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	ip neigh replace 2001:db8:2::2 lladdr $(mac_get $h3) \
+		nud permanent dev br2
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
new file mode 100755
index 0000000000..f35313c76f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
@@ -0,0 +1,133 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device without vlan filtering (802.1d). The device attached to that
+# bridge is a VLAN.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_stp
+	test_ip6gretap_stp
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name br2 address $(mac_get $swp3) \
+		type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	vlan_create $swp3 555
+
+	ip link set dev $swp3.555 master br2
+	ip route add 192.0.2.130/32 dev br2
+	ip -6 route add 2001:db8:2::2/128 dev br2
+
+	ip address add dev br2 192.0.2.129/32
+	ip address add dev br2 2001:db8:2::1/128
+
+	vlan_create $h3 555 v$h3 192.0.2.130/28 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	vlan_destroy $h3 555
+	ip link del dev br2
+	vlan_destroy $swp3 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_vlan_match()
+{
+	local tundev=$1; shift
+	local vlan_match=$1; shift
+	local what=$1; shift
+
+	full_test_span_gre_dir_vlan $tundev ingress "$vlan_match" 8 0 "$what"
+	full_test_span_gre_dir_vlan $tundev egress "$vlan_match" 0 8 "$what"
+}
+
+test_gretap()
+{
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ipv6' \
+			"mirror to ip6gretap"
+}
+
+test_gretap_stp()
+{
+	# Sometimes after mirror installation, the neighbor's state is not valid.
+	# The reason is that there is no SW datapath activity related to the
+	# neighbor for the remote GRE address. Therefore whether the corresponding
+	# neighbor will be valid is a matter of luck, and the test is thus racy.
+	# Set the neighbor's state to permanent, so it would be always valid.
+	ip neigh replace 192.0.2.130 lladdr $(mac_get $h3) \
+		nud permanent dev br2
+	full_test_span_gre_stp gt4 $swp3.555 "mirror to gretap"
+}
+
+test_ip6gretap_stp()
+{
+	ip neigh replace 2001:db8:2::2 lladdr $(mac_get $h3) \
+		nud permanent dev br2
+	full_test_span_gre_stp gt6 $swp3.555 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
new file mode 100755
index 0000000000..0cf4c47a46
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
@@ -0,0 +1,133 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                               +---------------------+
+#  | H1                  |                               |                  H2 |
+#  |     + $h1           |                               |           $h2 +     |
+#  |     | 192.0.2.1/28  |                               |  192.0.2.2/28 |     |
+#  +-----|---------------+                               +---------------|-----+
+#        |                                                               |
+#  +-----|---------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                    |     |
+#  | +---|---------------------------------------------------------------|---+ |
+#  | |   + $swp1                  + br1 (802.1q bridge)            $swp2 +   | |
+#  | |                              192.0.2.129/28                           | |
+#  | |   + $swp3                    2001:db8:2::1/64                         | |
+#  | |   | vid555                   vid555[pvid,untagged]                    | |
+#  | +---|-------------------------------------------------------------------+ |
+#  |     |                                          ^                      ^   |
+#  |     |                     + gt6 (ip6gretap)    |   + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  |   : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+   : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100                : ttl=100              |
+#  |     |                     : tos=inherit            : tos=inherit          |
+#  +-----|---------------------:------------------------:----------------------+
+#        |                     :                        :
+#  +-----|---------------------:------------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)      + h3-gt4 (gretap)      |
+#  |     |                       loc=2001:db8:2::2        loc=192.0.2.130      |
+#  |     + $h3.555               rem=2001:db8:2::1        rem=192.0.2.129      |
+#  |       192.0.2.130/28        ttl=100                  ttl=100              |
+#  |       2001:db8:2::2/64      tos=inherit              tos=inherit          |
+#  +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+	# Avoid changing br1's PVID while it is operational as a L3 interface.
+	ip link set dev br1 down
+
+	ip link set dev $swp3 master br1
+	bridge vlan add dev br1 vid 555 pvid untagged self
+	ip link set dev br1 up
+	ip address add dev br1 192.0.2.129/28
+	ip address add dev br1 2001:db8:2::1/64
+
+	ip -4 route add 192.0.2.130/32 dev br1
+	ip -6 route add 2001:db8:2::2/128 dev br1
+
+	vlan_create $h3 555 v$h3 192.0.2.130/28 2001:db8:2::2/64
+	bridge vlan add dev $swp3 vid 555
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp3 nomaster
+	vlan_destroy $h3 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	ip neigh replace 192.0.2.130 lladdr $(mac_get $h3) \
+		 nud permanent dev br1
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	ip neigh replace 2001:db8:2::2 lladdr $(mac_get $h3) \
+		nud permanent dev br1
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+tests()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+tests
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 0000000000..c53148b1dc
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,294 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |     + $h1.333        |                             |        $h1.555 +     |
+# |     | 192.0.2.1/28   |                             |  192.0.2.18/28 |     |
+# +-----|----------------+                             +----------------|-----+
+#       |                               $h1                             |
+#       +--------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |     +--------------------------------+------------------------------+     |
+# |     |                              $swp1                            |     |
+# |     + $swp1.333                                           $swp1.555 +     |
+# |       192.0.2.2/28                                    192.0.2.17/28       |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                        BR1 (802.1q)                                   | |
+# | |     + lag (team)       192.0.2.129/28                                 | |
+# | |    / \                 2001:db8:2::1/64                               | |
+# | +---/---\---------------------------------------------------------------+ |
+# |    /     \                                                            ^   |
+# |   |       \                                        + gt4 (gretap)     |   |
+# |   |        \                                         loc=192.0.2.129  |   |
+# |   |         \                                        rem=192.0.2.130 -+   |
+# |   |          \                                       ttl=100              |
+# |   |           \                                      tos=inherit          |
+# |   |            \                                                          |
+# |   |             \_________________________________                        |
+# |   |                                               \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|----------------------+                     +---|----------------------+
+# |   + $h3               H3 |                     |   + $h4               H4 |
+# |     192.0.2.130/28       |                     |     192.0.2.130/28       |
+# |     2001:db8:2::2/64     |                     |     2001:db8:2::2/64     |
+# +--------------------------+                     +--------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28
+	tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+	simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+	simple_if_init $h4 192.0.2.130/28
+	tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+	tc qdisc del dev $h4 clsact
+	simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+
+	ip link add name br1 address $(mac_get $swp3) \
+		type bridge vlan_filtering 1
+
+	team_create lag loadbalance $swp3 $swp4
+	ip link set dev lag master br1
+
+	ip link set dev br1 up
+	__addr_add_del br1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev br1
+}
+
+switch_destroy()
+{
+	ip link set dev lag nomaster
+	team_destroy lag
+
+	ip -4 route del 192.0.2.130/32 dev br1
+	__addr_add_del br1 del 192.0.2.129/32
+	ip link set dev br1 down
+	ip link del dev br1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	h4_create
+	switch_create
+
+	forwarding_enable
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	forwarding_restore
+
+	switch_destroy
+	h4_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local host_dev=$1; shift
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	tc filter add dev $swp1 ingress pref 999 \
+		proto 802.1q flower vlan_ethtype arp $tcflags \
+		action pass
+	mirror_install $swp1 ingress gt4 \
+		"proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Test connectivity through $up_dev when $down_dev is set down.
+	ip link set dev $down_dev down
+	ip neigh flush dev br1
+	setup_wait_dev $up_dev
+	setup_wait_dev $host_dev
+	$ARPING -I br1 192.0.2.130 -qfc 1
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+	# Test lack of connectivity when both slaves are down.
+	ip link set dev $up_dev down
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+	ip link set dev $up_dev up
+	ip link set dev $down_dev up
+	mirror_uninstall $swp1 ingress
+	tc filter del dev $swp1 ingress pref 999
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
new file mode 100755
index 0000000000..5ea9d63915
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
@@ -0,0 +1,273 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test how mirrors to gretap and ip6gretap react to changes to relevant
+# configuration.
+
+ALL_TESTS="
+	test_ttl
+	test_tun_up
+	test_egress_up
+	test_remote_ip
+	test_tun_del
+	test_route_del
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	# This test downs $swp3, which deletes the configured IPv6 address
+	# unless this sysctl is set.
+	sysctl_set net.ipv6.conf.$swp3.keep_addr_on_down 1
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	sysctl_restore net.ipv6.conf.$swp3.keep_addr_on_down
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local prot=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev \
+		"prot ip flower $tcflags ip_prot icmp"
+	tc filter add dev $h3 ingress pref 77 prot $prot \
+		flower skip_hw ip_ttl 50 action pass
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0
+
+	ip link set dev $tundev type $type ttl 50
+	sleep 2
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10
+
+	ip link set dev $tundev type $type ttl 100
+	tc filter del dev $h3 ingress pref 77
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: TTL change ($tcflags)"
+}
+
+test_span_gre_tun_up()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev up
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel down/up ($tcflags)"
+}
+
+test_span_gre_egress_up()
+{
+	local tundev=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $swp3 down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	# After setting the device up, wait for neighbor to get resolved so that
+	# we can expect mirroring to work.
+	ip link set dev $swp3 up
+	setup_wait_dev $swp3
+	ping -c 1 -I $swp3 $remote_ip &>/dev/null
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: egress down/up ($tcflags)"
+}
+
+test_span_gre_remote_ip()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local correct_ip=$1; shift
+	local wrong_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type remote $wrong_ip
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type remote $correct_ip
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: remote address change ($tcflags)"
+}
+
+test_span_gre_tun_del()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local flags=$1; shift
+	local local_ip=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+	ip link del dev $tundev
+	fail_test_span_gre_dir $tundev ingress
+
+	tunnel_create $tundev $type $local_ip $remote_ip \
+		      ttl 100 tos inherit $flags
+
+	# Recreating the tunnel doesn't reestablish mirroring, so reinstall it
+	# and verify it works for the follow-up tests.
+	mirror_uninstall $swp1 ingress
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel deleted ($tcflags)"
+}
+
+test_span_gre_route_del()
+{
+	local tundev=$1; shift
+	local edev=$1; shift
+	local route=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	ip route del $route dev $edev
+	fail_test_span_gre_dir $tundev ingress
+
+	ip route add $route dev $edev
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: underlay route removal ($tcflags)"
+}
+
+test_ttl()
+{
+	test_span_gre_ttl gt4 gretap ip "mirror to gretap"
+	test_span_gre_ttl gt6 ip6gretap ipv6 "mirror to ip6gretap"
+}
+
+test_tun_up()
+{
+	test_span_gre_tun_up gt4 "mirror to gretap"
+	test_span_gre_tun_up gt6 "mirror to ip6gretap"
+}
+
+test_egress_up()
+{
+	test_span_gre_egress_up gt4 192.0.2.130 "mirror to gretap"
+	test_span_gre_egress_up gt6 2001:db8:2::2 "mirror to ip6gretap"
+}
+
+test_remote_ip()
+{
+	test_span_gre_remote_ip gt4 gretap 192.0.2.130 192.0.2.132 "mirror to gretap"
+	test_span_gre_remote_ip gt6 ip6gretap 2001:db8:2::2 2001:db8:2::4 "mirror to ip6gretap"
+}
+
+test_tun_del()
+{
+	test_span_gre_tun_del gt4 gretap "" \
+			      192.0.2.129 192.0.2.130 "mirror to gretap"
+	test_span_gre_tun_del gt6 ip6gretap allow-localremote \
+			      2001:db8:2::1 2001:db8:2::2 "mirror to ip6gretap"
+}
+
+test_route_del()
+{
+	test_span_gre_route_del gt4 $swp3 192.0.2.128/28 "mirror to gretap"
+	test_span_gre_route_del gt6 $swp3 2001:db8:2::/64 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh b/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh
new file mode 100755
index 0000000000..09389f3b93
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# This tests flower-triggered mirroring to gretap and ip6gretap netdevices. The
+# interfaces on H1 and H2 have two addresses each. Flower match on one of the
+# addresses is configured with mirror action. It is expected that when pinging
+# this address, mirroring takes place, whereas when pinging the other one,
+# there's no mirroring.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+
+	ip address add dev $h1 192.0.2.3/28
+	ip address add dev $h2 192.0.2.4/28
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h2 192.0.2.4/28
+	ip address del dev $h1 192.0.2.3/28
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_dir_acl()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.3 192.0.2.4
+}
+
+fail_test_span_gre_dir_acl()
+{
+	fail_test_span_gre_dir_ips "$@" 192.0.2.3 192.0.2.4
+}
+
+full_test_span_gre_dir_acl()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local match_dip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev \
+		       "protocol ip flower $tcflags dst_ip $match_dip"
+	fail_test_span_gre_dir $tundev $direction
+	test_span_gre_dir_acl "$tundev" "$direction" \
+			  "$forward_type" "$backward_type"
+	mirror_uninstall $swp1 $direction
+
+	# Test lack of mirroring after ACL mirror is uninstalled.
+	fail_test_span_gre_dir_acl "$tundev" "$direction"
+
+	log_test "$direction $what ($tcflags)"
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir_acl gt4 ingress 8 0 192.0.2.4 "ACL mirror to gretap"
+	full_test_span_gre_dir_acl gt4 egress 0 8 192.0.2.3 "ACL mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir_acl gt6 ingress 8 0 192.0.2.4 "ACL mirror to ip6gretap"
+	full_test_span_gre_dir_acl gt6 egress 0 8 192.0.2.3 "ACL mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 0000000000..9edf4cb104
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1.333         |                             |        $h1.555 +     |
+# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                $h1                             |
+#      +---------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |   +----------------------------------+------------------------------+     |
+# |   |                                $swp1                            |     |
+# |   + $swp1.333                                             $swp1.555 +     |
+# |     192.0.2.2/28                                      192.0.2.17/28       |
+# |                                                                           |
+# |                                                                           |
+# |   + gt4 (gretap)      ,-> + lag1 (team)                                   |
+# |     loc=192.0.2.129   |   | 192.0.2.129/28                                |
+# |     rem=192.0.2.130 --'   |                                               |
+# |     ttl=100               |                                               |
+# |     tos=inherit           |                                               |
+# |      _____________________|______________________                         |
+# |     /                                            \                        |
+# |    /                                              \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|------------------------------------------------|----------------------+
+# |   + $h3                                            + $h4               H3 |
+# |    \                                              /                       |
+# |     \____________________________________________/                        |
+# |                           |                                               |
+# |                           + lag2 (team)                                   |
+# |                             192.0.2.130/28                                |
+# |                                                                           |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+	team_create lag2 lacp $h3 $h4
+	__simple_if_init lag2 vrf-h3 192.0.2.130/32
+	ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+	ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+	__simple_if_fini lag2 192.0.2.130/32
+	team_destroy lag2
+
+	ip link set dev $h3 down
+	ip link set dev $h4 down
+}
+
+h3_create()
+{
+	vrf_create vrf-h3
+	ip link set dev vrf-h3 up
+	tc qdisc add dev $h3 clsact
+	tc qdisc add dev $h4 clsact
+	h3_create_team
+}
+
+h3_destroy()
+{
+	h3_destroy_team
+	tc qdisc del dev $h4 clsact
+	tc qdisc del dev $h3 clsact
+	ip link set dev vrf-h3 down
+	vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+	team_create lag1 lacp $swp3 $swp4
+	__addr_add_del lag1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+	ip -4 route del 192.0.2.130/32 dev lag1
+	__addr_add_del lag1 del 192.0.2.129/32
+	team_destroy lag1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress gt4 \
+		       "proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Move $down_dev away from the team. That will prompt change in
+	# txability of the connected device, without changing its upness. The
+	# driver should notice the txability change and move the traffic to the
+	# other slave.
+	ip link set dev $down_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+	# Test lack of connectivity when neither slave is txable.
+	ip link set dev $up_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+	mirror_uninstall $swp1 ingress
+
+	# Recreate H3's team device, because mlxsw, which this test is
+	# predominantly mean to test, requires a bottom-up construction and
+	# doesn't allow enslavement to a device that already has an upper.
+	h3_destroy_team
+	h3_create_team
+	# Wait for ${h,swp}{3,4}.
+	setup_wait
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
new file mode 100644
index 0000000000..fac486178e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0
+
+source "$relative_path/mirror_lib.sh"
+
+quick_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	do_test_span_dir_ips 10 h3-$tundev "$@"
+}
+
+fail_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	do_test_span_dir_ips 0 h3-$tundev "$@"
+}
+
+test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	test_span_dir_ips h3-$tundev "$@"
+}
+
+full_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	test_span_dir_ips "h3-$tundev" "$direction" "$forward_type" \
+			  "$backward_type" "$ip1" "$ip2"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+full_test_span_gre_dir_vlan_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local vlan_match=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+
+	test_span_dir_ips "h3-$tundev" "$direction" "$forward_type" \
+			  "$backward_type" "$ip1" "$ip2"
+
+	tc filter add dev $h3 ingress pref 77 prot 802.1q \
+		flower $vlan_match \
+		action pass
+	mirror_test v$h1 $ip1 $ip2 $h3 77 10
+	tc filter del dev $h3 ingress pref 77
+
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+quick_test_span_gre_dir()
+{
+	quick_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+fail_test_span_gre_dir()
+{
+	fail_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+test_span_gre_dir()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_dir()
+{
+	full_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_dir_vlan()
+{
+	full_test_span_gre_dir_vlan_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_stp_ips()
+{
+	local tundev=$1; shift
+	local nbpdev=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local h3mac=$(mac_get $h3)
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	bridge link set dev $nbpdev state disabled
+	sleep 1
+	fail_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	bridge link set dev $nbpdev state forwarding
+	sleep 1
+	quick_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: STP state ($tcflags)"
+}
+
+full_test_span_gre_stp()
+{
+	full_test_span_gre_stp_ips "$@" 192.0.2.1 192.0.2.2
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh b/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh
new file mode 100755
index 0000000000..fc0508e40f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh
@@ -0,0 +1,115 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for mirroring to gretap and ip6gretap, such that the neighbor entry for
+# the tunnel remote address has invalid address at the time that the mirroring
+# is set up. Later on, the neighbor is deleted and it is expected to be
+# reinitialized using the usual ARP process, and the mirroring offload updated.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_neigh()
+{
+	local addr=$1; shift
+	local tundev=$1; shift
+	local direction=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip neigh replace dev $swp3 $addr lladdr 00:11:22:33:44:55
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+	ip neigh del dev $swp3 $addr
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: neighbor change ($tcflags)"
+}
+
+test_gretap()
+{
+	test_span_gre_neigh 192.0.2.130 gt4 ingress "mirror to gretap"
+	test_span_gre_neigh 192.0.2.130 gt4 egress "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_span_gre_neigh 2001:db8:2::2 gt6 ingress "mirror to ip6gretap"
+	test_span_gre_neigh 2001:db8:2::2 gt6 egress "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
new file mode 100755
index 0000000000..6f9ef1820e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
@@ -0,0 +1,131 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test that gretap and ip6gretap mirroring works when the other tunnel endpoint
+# is reachable through a next-hop route (as opposed to directly-attached route).
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$h3.rp_filter 0
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	sysctl_set net.ipv4.conf.v$h3.rp_filter 0
+
+	ip address add dev $swp3 192.0.2.161/28
+	ip address add dev $h3 192.0.2.162/28
+	ip address add dev gt4 192.0.2.129/32
+	ip address add dev h3-gt4 192.0.2.130/32
+
+	# IPv6 route can't be added after address. Such routes are rejected due
+	# to the gateway address having been configured on the local system. It
+	# works the other way around though.
+	ip address add dev $swp3 2001:db8:4::1/64
+	ip -6 route add 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address add dev $h3 2001:db8:4::2/64
+	ip address add dev gt6 2001:db8:2::1
+	ip address add dev h3-gt6 2001:db8:2::2
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip -6 route del 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address del dev $h3 2001:db8:4::2/64
+	ip address del dev $swp3 2001:db8:4::1/64
+
+	ip address del dev $h3 192.0.2.162/28
+	ip address del dev $swp3 192.0.2.161/28
+
+	sysctl_restore net.ipv4.conf.v$h3.rp_filter 0
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+
+	sysctl_restore net.ipv4.conf.$h3.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+test_gretap()
+{
+	RET=0
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+
+	# For IPv4, test that there's no mirroring without the route directing
+	# the traffic to tunnel remote address. Then add it and test that
+	# mirroring starts. For IPv6 we can't test this due to the limitation
+	# that routes for locally-specified IPv6 addresses can't be added.
+	fail_test_span_gre_dir gt4 ingress
+
+	ip route add 192.0.2.130/32 via 192.0.2.162
+	quick_test_span_gre_dir gt4 ingress
+	ip route del 192.0.2.130/32 via 192.0.2.162
+
+	mirror_uninstall $swp1 ingress
+	log_test "mirror to gre with next-hop remote ($tcflags)"
+}
+
+test_ip6gretap()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt6 ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "mirror to ip6gre with next-hop remote ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
new file mode 100644
index 0000000000..39c03e2867
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is the standard topology for testing mirroring to gretap and ip6gretap
+# netdevices. The tests that use it tweak it in one way or another--importantly,
+# $swp3 and $h3 need to have addresses set up.
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3               + gt6 (ip6gretap)      + gt4 (gretap)         |
+#   |     |                     : loc=2001:db8:2::1    : loc=192.0.2.129      |
+#   |     |                     : rem=2001:db8:2::2    : rem=192.0.2.130      |
+#   |     |                     : ttl=100              : ttl=100              |
+#   |     |                     : tos=inherit          : tos=inherit          |
+#   |     |                     :                      :                      |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |                             loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |                             rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source "$relative_path/mirror_topo_lib.sh"
+
+mirror_gre_topo_h3_create()
+{
+	mirror_topo_h3_create
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+mirror_gre_topo_h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	mirror_topo_h3_destroy
+}
+
+mirror_gre_topo_switch_create()
+{
+	mirror_topo_switch_create
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit allow-localremote
+}
+
+mirror_gre_topo_switch_destroy()
+{
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	mirror_topo_switch_destroy
+}
+
+mirror_gre_topo_create()
+{
+	mirror_topo_h1_create
+	mirror_topo_h2_create
+	mirror_gre_topo_h3_create
+
+	mirror_gre_topo_switch_create
+}
+
+mirror_gre_topo_destroy()
+{
+	mirror_gre_topo_switch_destroy
+
+	mirror_gre_topo_h3_destroy
+	mirror_topo_h2_destroy
+	mirror_topo_h1_destroy
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh
new file mode 100755
index 0000000000..88cecdb9a8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh
@@ -0,0 +1,92 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" that mirrors to a gretap netdevice
+# whose underlay route points at a vlan device.
+
+ALL_TESTS="
+	test_gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name $swp3.555 link $swp3 type vlan id 555
+	ip address add dev $swp3.555 192.0.2.129/32
+	ip address add dev $swp3.555 2001:db8:2::1/128
+	ip link set dev $swp3.555 up
+
+	ip route add 192.0.2.130/32 dev $swp3.555
+	ip -6 route add 2001:db8:2::2/128 dev $swp3.555
+
+	ip link add name $h3.555 link $h3 type vlan id 555
+	ip link set dev $h3.555 master v$h3
+	ip address add dev $h3.555 192.0.2.130/28
+	ip address add dev $h3.555 2001:db8:2::2/64
+	ip link set dev $h3.555 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link del dev $h3.555
+	ip link del dev $swp3.555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
new file mode 100755
index 0000000000..c8a9b5bd84
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -0,0 +1,348 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# vlan device on top of a bridge device with vlan filtering (802.1q).
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirred egress mirror dev {gt4,gt6}                       |     |
+#   |     |                                                             |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    br1                          $swp2 +   | |
+#   | |                                                                     | |
+#   | |   + $swp3                                                           | |
+#   | +---|-----------------------------------------------------------------+ |
+#   |     |                        |                                          |
+#   |     |                        + br1.555                                  |
+#   |     |                          192.0.2.130/28                           |
+#   |     |                          2001:db8:2::2/64                         |
+#   |     |                                                                   |
+#   |     |                     + gt6 (ip6gretap)      + gt4 (gretap)         |
+#   |     |                     : loc=2001:db8:2::1    : loc=192.0.2.129      |
+#   |     |                     : rem=2001:db8:2::2    : rem=192.0.2.130      |
+#   |     |                     : ttl=100              : ttl=100              |
+#   |     |                     : tos=inherit          : tos=inherit          |
+#   |     |                     :                      :                      |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |     |                       loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |     + $h3.555               rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |       192.0.2.130/28        ttl=100                ttl=100              |
+#   |       2001:db8:2::2/64      tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_forbidden_cpu
+	test_ip6gretap_forbidden_cpu
+	test_gretap_forbidden_egress
+	test_ip6gretap_forbidden_egress
+	test_gretap_untagged_egress
+	test_ip6gretap_untagged_egress
+	test_gretap_fdb_roaming
+	test_ip6gretap_fdb_roaming
+	test_gretap_stp
+	test_ip6gretap_stp
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+require_command $ARPING
+
+h3_addr_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+
+	ip addr $add_del dev $dev 192.0.2.130/28
+	ip addr $add_del dev $dev 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	# gt4's remote address is at $h3.555, not $h3. Thus the packets arriving
+	# directly to $h3 for test_gretap_untagged_egress() are rejected by
+	# rp_filter and the test spuriously fails.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$h3.rp_filter 0
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	vlan_create br1 555 "" 192.0.2.129/32 2001:db8:2::1/128
+	bridge vlan add dev br1 vid 555 self
+	ip route rep 192.0.2.130/32 dev br1.555
+	ip -6 route rep 2001:db8:2::2/128 dev br1.555
+
+	vlan_create $h3 555 v$h3
+	h3_addr_add_del add $h3.555
+
+	ip link set dev $swp3 master br1
+	bridge vlan add dev $swp3 vid 555
+	bridge vlan add dev $swp2 vid 555
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp3 nomaster
+
+	h3_addr_add_del del $h3.555
+	vlan_destroy $h3 555
+	vlan_destroy br1 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+
+	sysctl_restore net.ipv4.conf.$h3.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+test_vlan_match()
+{
+	local tundev=$1; shift
+	local vlan_match=$1; shift
+	local what=$1; shift
+
+	full_test_span_gre_dir_vlan $tundev ingress "$vlan_match" 8 0 "$what"
+	full_test_span_gre_dir_vlan $tundev egress "$vlan_match" 0 8 "$what"
+}
+
+test_gretap()
+{
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ipv6' \
+			"mirror to ip6gretap"
+}
+
+test_span_gre_forbidden_cpu()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	# Run the pass-test first, to prime neighbor table.
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	# Now forbid the VLAN at the bridge and see it fail.
+	bridge vlan del dev br1 vid 555 self
+	sleep 1
+	fail_test_span_gre_dir $tundev ingress
+
+	bridge vlan add dev br1 vid 555 self
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan forbidden at a bridge ($tcflags)"
+}
+
+test_gretap_forbidden_cpu()
+{
+	test_span_gre_forbidden_cpu gt4 "mirror to gretap"
+}
+
+test_ip6gretap_forbidden_cpu()
+{
+	test_span_gre_forbidden_cpu gt6 "mirror to ip6gretap"
+}
+
+test_span_gre_forbidden_egress()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	bridge vlan del dev $swp3 vid 555
+	sleep 1
+	fail_test_span_gre_dir $tundev ingress
+
+	bridge vlan add dev $swp3 vid 555
+	# Re-prime FDB
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan forbidden at a bridge egress ($tcflags)"
+}
+
+test_gretap_forbidden_egress()
+{
+	test_span_gre_forbidden_egress gt4 "mirror to gretap"
+}
+
+test_ip6gretap_forbidden_egress()
+{
+	test_span_gre_forbidden_egress gt6 "mirror to ip6gretap"
+}
+
+test_span_gre_untagged_egress()
+{
+	local tundev=$1; shift
+	local ul_proto=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+
+	quick_test_span_gre_dir $tundev ingress
+	quick_test_span_vlan_dir $h3 555 ingress "$ul_proto"
+
+	h3_addr_add_del del $h3.555
+	bridge vlan add dev $swp3 vid 555 pvid untagged
+	h3_addr_add_del add $h3
+	sleep 5
+
+	quick_test_span_gre_dir $tundev ingress
+	fail_test_span_vlan_dir $h3 555 ingress "$ul_proto"
+
+	h3_addr_add_del del $h3
+	bridge vlan add dev $swp3 vid 555
+	h3_addr_add_del add $h3.555
+	sleep 5
+
+	quick_test_span_gre_dir $tundev ingress
+	quick_test_span_vlan_dir $h3 555 ingress "$ul_proto"
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan untagged at a bridge egress ($tcflags)"
+}
+
+test_gretap_untagged_egress()
+{
+	test_span_gre_untagged_egress gt4 ip "mirror to gretap"
+}
+
+test_ip6gretap_untagged_egress()
+{
+	test_span_gre_untagged_egress gt6 ipv6 "mirror to ip6gretap"
+}
+
+test_span_gre_fdb_roaming()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+	local h3mac=$(mac_get $h3)
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	while ((RET == 0)); do
+		bridge fdb del dev $swp3 $h3mac vlan 555 master 2>/dev/null
+		bridge fdb add dev $swp2 $h3mac vlan 555 master static
+		sleep 1
+		fail_test_span_gre_dir $tundev ingress
+
+		if ! bridge fdb sh dev $swp2 vlan 555 master \
+		    | grep -q $h3mac; then
+			printf "TEST: %-60s  [RETRY]\n" \
+				"$what: MAC roaming ($tcflags)"
+			# ARP or ND probably reprimed the FDB while the test
+			# was running. We would get a spurious failure.
+			RET=0
+			continue
+		fi
+		break
+	done
+
+	bridge fdb del dev $swp2 $h3mac vlan 555 master 2>/dev/null
+	# Re-prime FDB
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: MAC roaming ($tcflags)"
+}
+
+test_gretap_fdb_roaming()
+{
+	test_span_gre_fdb_roaming gt4 "mirror to gretap"
+}
+
+test_ip6gretap_fdb_roaming()
+{
+	test_span_gre_fdb_roaming gt6 "mirror to ip6gretap"
+}
+
+test_gretap_stp()
+{
+	full_test_span_gre_stp gt4 $swp3 "mirror to gretap"
+}
+
+test_ip6gretap_stp()
+{
+	full_test_span_gre_stp gt6 $swp3 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_lib.sh b/tools/testing/selftests/net/forwarding/mirror_lib.sh
new file mode 100644
index 0000000000..3e8ebeff30
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_lib.sh
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0
+
+mirror_install()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+	local to_dev=$1; shift
+	local filter=$1; shift
+
+	tc filter add dev $from_dev $direction \
+	   pref 1000 $filter \
+	   action mirred egress mirror dev $to_dev
+}
+
+mirror_uninstall()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+
+	tc filter del dev $swp1 $direction pref 1000
+}
+
+is_ipv6()
+{
+	local addr=$1; shift
+
+	[[ -z ${addr//[0-9a-fA-F:]/} ]]
+}
+
+mirror_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local dev=$1; shift
+	local pref=$1; shift
+	local expect=$1; shift
+
+	if is_ipv6 $dip; then
+		local proto=-6
+		local type="icmp6 type=128" # Echo request.
+	else
+		local proto=
+		local type="icmp echoreq"
+	fi
+
+	local t0=$(tc_rule_stats_get $dev $pref)
+	$MZ $proto $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
+	    -c 10 -d 100msec -t $type
+	sleep 0.5
+	local t1=$(tc_rule_stats_get $dev $pref)
+	local delta=$((t1 - t0))
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}
+
+do_test_span_dir_ips()
+{
+	local expect=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	icmp_capture_install $dev
+	mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
+	mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
+	icmp_capture_uninstall $dev
+}
+
+quick_test_span_dir_ips()
+{
+	do_test_span_dir_ips 10 "$@"
+}
+
+fail_test_span_dir_ips()
+{
+	do_test_span_dir_ips 0 "$@"
+}
+
+test_span_dir_ips()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	quick_test_span_dir_ips "$dev" "$direction" "$ip1" "$ip2"
+
+	icmp_capture_install $dev "type $forward_type"
+	mirror_test v$h1 $ip1 $ip2 $dev 100 10
+	icmp_capture_uninstall $dev
+
+	icmp_capture_install $dev "type $backward_type"
+	mirror_test v$h2 $ip2 $ip1 $dev 100 10
+	icmp_capture_uninstall $dev
+}
+
+fail_test_span_dir()
+{
+	fail_test_span_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+test_span_dir()
+{
+	test_span_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+do_test_span_vlan_dir_ips()
+{
+	local expect=$1; shift
+	local dev=$1; shift
+	local vid=$1; shift
+	local direction=$1; shift
+	local ul_proto=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	# Install the capture as skip_hw to avoid double-counting of packets.
+	# The traffic is meant for local box anyway, so will be trapped to
+	# kernel.
+	vlan_capture_install $dev "skip_hw vlan_id $vid vlan_ethtype $ul_proto"
+	mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
+	mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
+	vlan_capture_uninstall $dev
+}
+
+quick_test_span_vlan_dir_ips()
+{
+	do_test_span_vlan_dir_ips 10 "$@"
+}
+
+fail_test_span_vlan_dir_ips()
+{
+	do_test_span_vlan_dir_ips 0 "$@"
+}
+
+quick_test_span_vlan_dir()
+{
+	quick_test_span_vlan_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+fail_test_span_vlan_dir()
+{
+	fail_test_span_vlan_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh
new file mode 100644
index 0000000000..bb1adbb7b9
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is the standard topology for testing mirroring. The tests that use it
+# tweak it in one way or another--typically add more devices to the topology.
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                                                             |
+#   +-----|-------------------------------------------------------------------+
+#         |
+#   +-----|-------------------------------------------------------------------+
+#   | H3  + $h3                                                               |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+mirror_topo_h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+mirror_topo_h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+mirror_topo_h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+mirror_topo_h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+mirror_topo_h3_create()
+{
+	simple_if_init $h3
+	tc qdisc add dev $h3 clsact
+}
+
+mirror_topo_h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+	simple_if_fini $h3
+}
+
+mirror_topo_switch_create()
+{
+	ip link set dev $swp3 up
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 addrgenmode none
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+}
+
+mirror_topo_switch_destroy()
+{
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+
+	ip link set dev $swp3 down
+}
+
+mirror_topo_create()
+{
+	mirror_topo_h1_create
+	mirror_topo_h2_create
+	mirror_topo_h3_create
+
+	mirror_topo_switch_create
+}
+
+mirror_topo_destroy()
+{
+	mirror_topo_switch_destroy
+
+	mirror_topo_h3_destroy
+	mirror_topo_h2_destroy
+	mirror_topo_h1_destroy
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_vlan.sh
new file mode 100755
index 0000000000..0b44e14823
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_vlan.sh
@@ -0,0 +1,131 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing mirroring. See mirror_topo_lib.sh
+# for more details.
+#
+# Test for "tc action mirred egress mirror" that mirrors to a vlan device.
+
+ALL_TESTS="
+	test_vlan
+	test_tagged_vlan
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_topo_create
+
+	vlan_create $swp3 555
+
+	vlan_create $h3 555 v$h3
+	matchall_sink_create $h3.555
+
+	vlan_create $h1 111 v$h1 192.0.2.17/28
+	bridge vlan add dev $swp1 vid 111
+
+	vlan_create $h2 111 v$h2 192.0.2.18/28
+	bridge vlan add dev $swp2 vid 111
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	vlan_destroy $h2 111
+	vlan_destroy $h1 111
+	vlan_destroy $h3 555
+	vlan_destroy $swp3 555
+
+	mirror_topo_destroy
+	vrf_cleanup
+}
+
+test_vlan_dir()
+{
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $swp3.555 "matchall $tcflags"
+	test_span_dir "$h3.555" "$direction" "$forward_type" "$backward_type"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction mirror to vlan ($tcflags)"
+}
+
+test_vlan()
+{
+	test_vlan_dir ingress 8 0
+	test_vlan_dir egress 0 8
+}
+
+test_tagged_vlan_dir()
+{
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $swp3.555 "matchall $tcflags"
+	do_test_span_vlan_dir_ips 10 "$h3.555" 111 "$direction" ip \
+				  192.0.2.17 192.0.2.18
+	do_test_span_vlan_dir_ips  0 "$h3.555" 555 "$direction" ip \
+				  192.0.2.17 192.0.2.18
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction mirror tagged to vlan ($tcflags)"
+}
+
+test_tagged_vlan()
+{
+	test_tagged_vlan_dir ingress 8 0
+	test_tagged_vlan_dir egress 0 8
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+	trap_install $h3 ingress
+
+	tests_run
+
+	trap_uninstall $h3 ingress
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/no_forwarding.sh b/tools/testing/selftests/net/forwarding/no_forwarding.sh
new file mode 100755
index 0000000000..af3b398d13
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/no_forwarding.sh
@@ -0,0 +1,261 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="standalone two_bridges one_bridge_two_pvids"
+NUM_NETIFS=4
+
+source lib.sh
+
+h1=${NETIFS[p1]}
+h2=${NETIFS[p3]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+IPV4_ALLNODES="224.0.0.1"
+IPV6_ALLNODES="ff02::1"
+MACV4_ALLNODES="01:00:5e:00:00:01"
+MACV6_ALLNODES="33:33:00:00:00:01"
+NON_IP_MC="01:02:03:04:05:06"
+NON_IP_PKT="00:04 48:45:4c:4f"
+BC="ff:ff:ff:ff:ff:ff"
+
+# The full 4K VLAN space is too much to check, so strategically pick some
+# values which should provide reasonable coverage
+vids=(0 1 2 5 10 20 50 100 200 500 1000 1000 2000 4000 4094)
+
+send_non_ip()
+{
+	local if_name=$1
+	local smac=$2
+	local dmac=$3
+
+	$MZ -q $if_name "$dmac $smac $NON_IP_PKT"
+}
+
+send_uc_ipv4()
+{
+	local if_name=$1
+	local dmac=$2
+
+	ip neigh add $H2_IPV4 lladdr $dmac dev $if_name
+	ping_do $if_name $H2_IPV4
+	ip neigh del $H2_IPV4 dev $if_name
+}
+
+send_mc_ipv4()
+{
+	local if_name=$1
+
+	ping_do $if_name $IPV4_ALLNODES "-I $if_name"
+}
+
+send_uc_ipv6()
+{
+	local if_name=$1
+	local dmac=$2
+
+	ip -6 neigh add $H2_IPV6 lladdr $dmac dev $if_name
+	ping6_do $if_name $H2_IPV6
+	ip -6 neigh del $H2_IPV6 dev $if_name
+}
+
+send_mc_ipv6()
+{
+	local if_name=$1
+
+	ping6_do $if_name $IPV6_ALLNODES%$if_name
+}
+
+check_rcv()
+{
+	local if_name=$1
+	local type=$2
+	local pattern=$3
+	local should_fail=1
+
+	RET=0
+
+	tcpdump_show $if_name | grep -q "$pattern"
+
+	check_err_fail "$should_fail" "$?" "reception"
+
+	log_test "$type"
+}
+
+run_test()
+{
+	local test_name="$1"
+	local smac=$(mac_get $h1)
+	local dmac=$(mac_get $h2)
+	local h1_ipv6_lladdr=$(ipv6_lladdr_get $h1)
+	local vid=
+
+	echo "$test_name: Sending packets"
+
+	tcpdump_start $h2
+
+	send_non_ip $h1 $smac $dmac
+	send_non_ip $h1 $smac $NON_IP_MC
+	send_non_ip $h1 $smac $BC
+	send_uc_ipv4 $h1 $dmac
+	send_mc_ipv4 $h1
+	send_uc_ipv6 $h1 $dmac
+	send_mc_ipv6 $h1
+
+	for vid in "${vids[@]}"; do
+		vlan_create $h1 $vid
+		simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+
+		send_non_ip $h1.$vid $smac $dmac
+		send_non_ip $h1.$vid $smac $NON_IP_MC
+		send_non_ip $h1.$vid $smac $BC
+		send_uc_ipv4 $h1.$vid $dmac
+		send_mc_ipv4 $h1.$vid
+		send_uc_ipv6 $h1.$vid $dmac
+		send_mc_ipv6 $h1.$vid
+
+		simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+		vlan_destroy $h1 $vid
+	done
+
+	sleep 1
+
+	echo "$test_name: Checking which packets were received"
+
+	tcpdump_stop $h2
+
+	check_rcv $h2 "$test_name: Unicast non-IP untagged" \
+		"$smac > $dmac, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Multicast non-IP untagged" \
+		"$smac > $NON_IP_MC, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Broadcast non-IP untagged" \
+		"$smac > $BC, 802.3, length 4:"
+
+	check_rcv $h2 "$test_name: Unicast IPv4 untagged" \
+		"$smac > $dmac, ethertype IPv4 (0x0800)"
+
+	check_rcv $h2 "$test_name: Multicast IPv4 untagged" \
+		"$smac > $MACV4_ALLNODES, ethertype IPv4 (0x0800).*: $H1_IPV4 > $IPV4_ALLNODES"
+
+	check_rcv $h2 "$test_name: Unicast IPv6 untagged" \
+		"$smac > $dmac, ethertype IPv6 (0x86dd).*8: $H1_IPV6 > $H2_IPV6"
+
+	check_rcv $h2 "$test_name: Multicast IPv6 untagged" \
+		"$smac > $MACV6_ALLNODES, ethertype IPv6 (0x86dd).*: $h1_ipv6_lladdr > $IPV6_ALLNODES"
+
+	for vid in "${vids[@]}"; do
+		check_rcv $h2 "$test_name: Unicast non-IP VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Multicast non-IP VID $vid" \
+			"$smac > $NON_IP_MC, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Broadcast non-IP VID $vid" \
+			"$smac > $BC, ethertype 802.1Q (0x8100).*vlan $vid,.*length 4"
+
+		check_rcv $h2 "$test_name: Unicast IPv4 VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv4 (0x0800), $H1_IPV4 > $H2_IPV4"
+
+		check_rcv $h2 "$test_name: Multicast IPv4 VID $vid" \
+			"$smac > $MACV4_ALLNODES, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv4 (0x0800), $H1_IPV4 > $IPV4_ALLNODES"
+
+		check_rcv $h2 "$test_name: Unicast IPv6 VID $vid" \
+			"$smac > $dmac, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv6 (0x86dd), $H1_IPV6 > $H2_IPV6"
+
+		check_rcv $h2 "$test_name: Multicast IPv6 VID $vid" \
+			"$smac > $MACV6_ALLNODES, ethertype 802.1Q (0x8100).*vlan $vid,.*ethertype IPv6 (0x86dd), $h1_ipv6_lladdr > $IPV6_ALLNODES"
+	done
+
+	tcpdump_cleanup $h2
+}
+
+standalone()
+{
+	run_test "Standalone switch ports"
+}
+
+two_bridges()
+{
+	ip link add br0 type bridge && ip link set br0 up
+	ip link add br1 type bridge && ip link set br1 up
+	ip link set $swp1 master br0
+	ip link set $swp2 master br1
+
+	run_test "Switch ports in different bridges"
+
+	ip link del br1
+	ip link del br0
+}
+
+one_bridge_two_pvids()
+{
+	ip link add br0 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set br0 up
+	ip link set $swp1 master br0
+	ip link set $swp2 master br0
+
+	bridge vlan add dev $swp1 vid 1 pvid untagged
+	bridge vlan add dev $swp1 vid 2 pvid untagged
+
+	run_test "Switch ports in VLAN-aware bridge with different PVIDs"
+
+	ip link del br0
+}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	# we call simple_if_init from the test itself, but setup_wait expects
+	# that we call it from here, and waits until the interfaces are up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/pedit_dsfield.sh b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
new file mode 100755
index 0000000000..af008fbf27
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
@@ -0,0 +1,313 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
+# egress of $swp2, the traffic is acted upon by a pedit action. An ingress
+# filter installed on $h2 verifies that the packet looks like expected.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	test_ip_dsfield
+	test_ip_dscp
+	test_ip_ecn
+	test_ip_dscp_ecn
+	test_ip6_dsfield
+	test_ip6_dscp
+	test_ip6_ecn
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 addrgenmode none
+	ip link set dev br1 up
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+do_test_pedit_dsfield_common()
+{
+	local pedit_locus=$1; shift
+	local pedit_action=$1; shift
+	local mz_flags=$1; shift
+
+	RET=0
+
+	# TOS 125: DSCP 31, ECN 1. Used for testing that the relevant part is
+	# overwritten when zero is selected.
+	$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -q -t tcp tos=0x7d,sp=54321,dp=12345
+
+	local pkts
+	pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
+			tc_rule_handle_stats_get "dev $h2 ingress" 101)
+	check_err $? "Expected to get 10 packets on test probe, but got $pkts."
+
+	pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
+	((pkts >= 10))
+	check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
+
+	log_test "$pedit_locus pedit $pedit_action"
+}
+
+do_test_pedit_dsfield()
+{
+	local pedit_locus=$1; shift
+	local pedit_action=$1; shift
+	local match_prot=$1; shift
+	local match_flower=$1; shift
+	local mz_flags=$1; shift
+	local saddr=$1; shift
+	local daddr=$1; shift
+
+	tc filter add $pedit_locus handle 101 pref 1 \
+	   flower action pedit ex munge $pedit_action
+	tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
+	   flower skip_hw $match_flower action pass
+
+	do_test_pedit_dsfield_common "$pedit_locus" "$pedit_action" "$mz_flags"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $pedit_locus pref 1
+}
+
+do_test_ip_dsfield()
+{
+	local locus=$1; shift
+	local dsfield
+
+	for dsfield in 0 1 2 3 128 252 253 254 255; do
+		do_test_pedit_dsfield "$locus"				\
+				      "ip dsfield set $dsfield"		\
+				      ip "ip_tos $dsfield"		\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_dsfield()
+{
+	do_test_ip_dsfield "dev $swp1 ingress"
+	do_test_ip_dsfield "dev $swp2 egress"
+}
+
+do_test_ip_dscp()
+{
+	local locus=$1; shift
+	local dscp
+
+	for dscp in 0 1 2 3 32 61 62 63; do
+		do_test_pedit_dsfield "$locus"				       \
+				  "ip dsfield set $((dscp << 2)) retain 0xfc"  \
+				  ip "ip_tos $(((dscp << 2) | 1))"	       \
+				  "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_dscp()
+{
+	do_test_ip_dscp "dev $swp1 ingress"
+	do_test_ip_dscp "dev $swp2 egress"
+}
+
+do_test_ip_ecn()
+{
+	local locus=$1; shift
+	local ecn
+
+	for ecn in 0 1 2 3; do
+		do_test_pedit_dsfield "$locus"				\
+				      "ip dsfield set $ecn retain 0x03"	\
+				      ip "ip_tos $((124 | $ecn))"	\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_ecn()
+{
+	do_test_ip_ecn "dev $swp1 ingress"
+	do_test_ip_ecn "dev $swp2 egress"
+}
+
+do_test_ip_dscp_ecn()
+{
+	local locus=$1; shift
+
+	tc filter add $locus handle 101 pref 1				\
+	   flower action pedit ex munge ip dsfield set 124 retain 0xfc	\
+		  action pedit ex munge ip dsfield set 1 retain 0x03
+	tc filter add dev $h2 ingress handle 101 pref 1 prot ip		\
+	   flower skip_hw ip_tos 125 action pass
+
+	do_test_pedit_dsfield_common "$locus" "set DSCP + set ECN"	\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $locus pref 1
+}
+
+test_ip_dscp_ecn()
+{
+	do_test_ip_dscp_ecn "dev $swp1 ingress"
+	do_test_ip_dscp_ecn "dev $swp2 egress"
+}
+
+do_test_ip6_dsfield()
+{
+	local locus=$1; shift
+	local dsfield
+
+	for dsfield in 0 1 2 3 128 252 253 254 255; do
+		do_test_pedit_dsfield "$locus"				\
+				  "ip6 traffic_class set $dsfield"	\
+				  ipv6 "ip_tos $dsfield"		\
+				  "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dsfield()
+{
+	do_test_ip6_dsfield "dev $swp1 ingress"
+	do_test_ip6_dsfield "dev $swp2 egress"
+}
+
+do_test_ip6_dscp()
+{
+	local locus=$1; shift
+	local dscp
+
+	for dscp in 0 1 2 3 32 61 62 63; do
+		do_test_pedit_dsfield "$locus"				       \
+			    "ip6 traffic_class set $((dscp << 2)) retain 0xfc" \
+			    ipv6 "ip_tos $(((dscp << 2) | 1))"		       \
+			    "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dscp()
+{
+	do_test_ip6_dscp "dev $swp1 ingress"
+	do_test_ip6_dscp "dev $swp2 egress"
+}
+
+do_test_ip6_ecn()
+{
+	local locus=$1; shift
+	local ecn
+
+	for ecn in 0 1 2 3; do
+		do_test_pedit_dsfield "$locus"				\
+				"ip6 traffic_class set $ecn retain 0x3"	\
+				ipv6 "ip_tos $((124 | $ecn))"		\
+				"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_ecn()
+{
+	do_test_ip6_ecn "dev $swp1 ingress"
+	do_test_ip6_ecn "dev $swp2 egress"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/pedit_ip.sh b/tools/testing/selftests/net/forwarding/pedit_ip.sh
new file mode 100755
index 0000000000..d14efb2d23
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/pedit_ip.sh
@@ -0,0 +1,201 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
+# egress of $swp2, the traffic is acted upon by a pedit action. An ingress
+# filter installed on $h2 verifies that the packet looks like expected.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	test_ip4_src
+	test_ip4_dst
+	test_ip6_src
+	test_ip6_dst
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge vlan_filtering 1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+do_test_pedit_ip()
+{
+	local pedit_locus=$1; shift
+	local pedit_action=$1; shift
+	local match_prot=$1; shift
+	local match_flower=$1; shift
+	local mz_flags=$1; shift
+
+	tc filter add $pedit_locus handle 101 pref 1 \
+	   flower action pedit ex munge $pedit_action
+	tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
+	   flower skip_hw $match_flower action pass
+
+	RET=0
+
+	$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 -a own -b $h2mac -q -t ip
+
+	local pkts
+	pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
+			tc_rule_handle_stats_get "dev $h2 ingress" 101)
+	check_err $? "Expected to get 10 packets, but got $pkts."
+
+	pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
+	((pkts >= 10))
+	check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
+
+	log_test "$pedit_locus pedit $pedit_action"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $pedit_locus pref 1
+}
+
+do_test_pedit_ip6()
+{
+	local locus=$1; shift
+	local pedit_addr=$1; shift
+	local flower_addr=$1; shift
+
+	do_test_pedit_ip "$locus" "$pedit_addr set 2001:db8:2::1" ipv6	\
+			 "$flower_addr 2001:db8:2::1"			\
+			 "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+}
+
+do_test_pedit_ip4()
+{
+	local locus=$1; shift
+	local pedit_addr=$1; shift
+	local flower_addr=$1; shift
+
+	do_test_pedit_ip "$locus" "$pedit_addr set 198.51.100.1" ip	\
+			 "$flower_addr 198.51.100.1"			\
+			 "-A 192.0.2.1 -B 192.0.2.2"
+}
+
+test_ip4_src()
+{
+	do_test_pedit_ip4 "dev $swp1 ingress" "ip src" src_ip
+	do_test_pedit_ip4 "dev $swp2 egress"  "ip src" src_ip
+}
+
+test_ip4_dst()
+{
+	do_test_pedit_ip4 "dev $swp1 ingress" "ip dst" dst_ip
+	do_test_pedit_ip4 "dev $swp2 egress"  "ip dst" dst_ip
+}
+
+test_ip6_src()
+{
+	do_test_pedit_ip6 "dev $swp1 ingress" "ip6 src" src_ip
+	do_test_pedit_ip6 "dev $swp2 egress"  "ip6 src" src_ip
+}
+
+test_ip6_dst()
+{
+	do_test_pedit_ip6 "dev $swp1 ingress" "ip6 dst" dst_ip
+	do_test_pedit_ip6 "dev $swp2 egress"  "ip6 dst" dst_ip
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/pedit_l4port.sh b/tools/testing/selftests/net/forwarding/pedit_l4port.sh
new file mode 100755
index 0000000000..10e594c551
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/pedit_l4port.sh
@@ -0,0 +1,200 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on egress of $swp2, the
+# traffic is acted upon by a pedit action. An ingress filter installed on $h2 verifies that the
+# packet looks like expected.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_udp_sport
+	test_udp_dport
+	test_tcp_sport
+	test_tcp_dport
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge vlan_filtering 1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+do_test_pedit_l4port_one()
+{
+	local pedit_locus=$1; shift
+	local pedit_prot=$1; shift
+	local pedit_action=$1; shift
+	local match_prot=$1; shift
+	local match_flower=$1; shift
+	local mz_flags=$1; shift
+	local saddr=$1; shift
+	local daddr=$1; shift
+
+	tc filter add $pedit_locus handle 101 pref 1 \
+	   flower action pedit ex munge $pedit_action
+	tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
+	   flower skip_hw $match_flower action pass
+
+	RET=0
+
+	$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -q -t $pedit_prot sp=54321,dp=12345
+
+	local pkts
+	pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
+			tc_rule_handle_stats_get "dev $h2 ingress" 101)
+	check_err $? "Expected to get 10 packets, but got $pkts."
+
+	pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
+	((pkts >= 10))
+	check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
+
+	log_test "$pedit_locus pedit $pedit_action"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $pedit_locus pref 1
+}
+
+do_test_pedit_l4port()
+{
+	local locus=$1; shift
+	local prot=$1; shift
+	local pedit_port=$1; shift
+	local flower_port=$1; shift
+	local port
+
+	for port in 1 11111 65535; do
+		do_test_pedit_l4port_one "$locus" "$prot"			\
+					 "$prot $pedit_port set $port"		\
+					 ip "ip_proto $prot $flower_port $port"	\
+					 "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_udp_sport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" udp sport src_port
+	do_test_pedit_l4port "dev $swp2 egress"  udp sport src_port
+}
+
+test_udp_dport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" udp dport dst_port
+	do_test_pedit_l4port "dev $swp2 egress"  udp dport dst_port
+}
+
+test_tcp_sport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" tcp sport src_port
+	do_test_pedit_l4port "dev $swp2 egress"  tcp sport src_port
+}
+
+test_tcp_dport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" tcp dport dst_port
+	do_test_pedit_l4port "dev $swp2 egress"  tcp dport dst_port
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/q_in_vni.sh b/tools/testing/selftests/net/forwarding/q_in_vni.sh
new file mode 100755
index 0000000000..798b13525c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/q_in_vni.sh
@@ -0,0 +1,348 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1ad)            + $swp2           | |
+# | |    vid 100 pvid untagged                              vid 100 pvid    | |
+# | |                                                           untagged    | |
+# | |  + vx100 (vxlan)                                                      | |
+# | |    local 192.0.2.17                                                   | |
+# | |    remote 192.0.2.34 192.0.2.50                                       | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | |    vid 100 pvid untagged                                              | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                 BR2 (802.1ad) | |   | |                 BR2 (802.1ad) | |
+# | |  + vx100 (vxlan)              | |   | |  + vx100 (vxlan)              | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |    vid 100 pvid untagged      | |   | |    vid 100 pvid untagged      | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 100 pvid untagged      | |   | |  | vid 100 pvid untagged      | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |  |\                           | |   | |  |\                           | |
+# | |  | + w2.10                    | |   | |  | + w2.10                    | |
+# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.20                      | |   | |  + w2.20                      | |
+# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+	vlan_create $h1 20 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0 mcast_snooping 0
+	ip link set dev br1 addrgenmode none
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx100 type vxlan id 1000		\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev vx100 master br1
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 100 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 100 dev $swp2 pvid untagged
+
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge vlan del vid 100 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 100 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx100 nomaster
+	ip link set dev vx100 down
+	ip link del dev vx100
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+	bridge vlan add vid 100 dev w1 pvid untagged
+
+	ip link add name vx100 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx100 up
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx100 master br2
+	tc qdisc add dev vx100 clsact
+
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/28
+        vlan_create w2 20 vw2 $host_addr2/24
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 \
+			     192.0.2.3 198.51.100.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 \
+			     192.0.2.4 198.51.100.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2 ": local->local"
+	ping_test $h1 192.0.2.3 ": local->remote 1"
+	ping_test $h1 192.0.2.4 ": local->remote 2"
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/q_in_vni_ipv6.sh b/tools/testing/selftests/net/forwarding/q_in_vni_ipv6.sh
new file mode 100755
index 0000000000..0548b2b0d4
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/q_in_vni_ipv6.sh
@@ -0,0 +1,347 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 2001:db8:1::1/64   |                          |  | 2001:db8:1::2/64    |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 2001:db8:2::1/64 |                          |  \ | 2001:db8:2::2/64  |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1ad)            + $swp2           | |
+# | |    vid 100 pvid untagged                              vid 100 pvid    | |
+# | |                                                           untagged    | |
+# | |  + vx100 (vxlan)                                                      | |
+# | |    local 2001:db8:3::1                                                | |
+# | |    remote 2001:db8:4::1 2001:db8:5::1                                 | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | |    vid 100 pvid untagged                                              | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  2001:db8:4::0/64 via 2001:db8:3::2                                       |
+# |  2001:db8:5::0/64 via 2001:db8:3::2                                       |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 2001:db8:3::1/64                                                     |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------+
+# |    |                                             VRP2 (vrf)   |
+# |    + $rp2                                                     |
+# |      2001:db8:3::2/64                                         |
+# |                                                               |   (maybe) HW
+# =============================================================================
+# |                                                               | (likely) SW
+# |    + v1 (veth)                             + v3 (veth)        |
+# |    | 2001:db8:4::2/64                      | 2001:db8:5::2/64 |
+# +----|---------------------------------------|------------------+
+#      |                                       |
+# +----|--------------------------------+ +----|-------------------------------+
+# |    + v2 (veth)        NS1 (netns)   | |    + v4 (veth)        NS2 (netns)  |
+# |      2001:db8:4::1/64               | |      2001:db8:5::1/64              |
+# |                                     | |                                    |
+# | 2001:db8:3::0/64 via 2001:db8:4::2  | | 2001:db8:3::0/64 via 2001:db8:5::2 |
+# | 2001:db8:5::1/128 via 2001:db8:4::2 | | 2001:db8:4::1/128 via              |
+# |                                     | |           2001:db8:5::2            |
+# | +-------------------------------+   | | +-------------------------------+  |
+# | |                 BR2 (802.1ad) |   | | |                 BR2 (802.1ad) |  |
+# | |  + vx100 (vxlan)              |   | | |  + vx100 (vxlan)              |  |
+# | |    local 2001:db8:4::1        |   | | |    local 2001:db8:5::1        |  |
+# | |    remote 2001:db8:3::1       |   | | |    remote 2001:db8:3::1       |  |
+# | |    remote 2001:db8:5::1       |   | | |    remote 2001:db8:4::1       |  |
+# | |    id 1000 dstport $VXPORT    |   | | |    id 1000 dstport $VXPORT    |  |
+# | |    vid 100 pvid untagged      |   | | |    vid 100 pvid untagged      |  |
+# | |                               |   | | |                               |  |
+# | |  + w1 (veth)                  |   | | |  + w1 (veth)                  |  |
+# | |  | vid 100 pvid untagged      |   | | |  | vid 100 pvid untagged      |  |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# |    |                                | |    |                               |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# | |  |                  VW2 (vrf) |   | | |  |                  VW2 (vrf) |  |
+# | |  + w2 (veth)                  |   | | |  + w2 (veth)                  |  |
+# | |  |\                           |   | | |  |\                           |  |
+# | |  | + w2.10                    |   | | |  | + w2.10                    |  |
+# | |  |   2001:db8:1::3/64         |   | | |  |   2001:db8:1::4/64         |  |
+# | |  |                            |   | | |  |                            |  |
+# | |  + w2.20                      |   | | |  + w2.20                      |  |
+# | |    2001:db8:2::3/64           |   | | |    2001:db8:2::4/64           |  |
+# | +-------------------------------+   | | +-------------------------------+  |
+# +-------------------------------------+ +------------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv6
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 2001:db8:1::1/64
+	vlan_create $h1 20 v$h1 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 2001:db8:1::2/64
+	vlan_create $h2 20 v$h2 2001:db8:2::2/64
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 2001:db8:3::1/64
+
+	ip route add 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+	ip route add 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+}
+
+rp1_unset_addr()
+{
+	ip route del 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+	ip route del 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+
+	ip address del dev $rp1 2001:db8:3::1/64
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx100 type vxlan id 1000	\
+		local 2001:db8:3::1 dstport "$VXPORT"	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx100 up
+
+	ip link set dev vx100 master br1
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 100 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 100 dev $swp2 pvid untagged
+
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 2001:db8:5::1 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx100 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	bridge vlan del vid 100 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 100 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx100 nomaster
+	ip link set dev vx100 down
+	ip link del dev vx100
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 2001:db8:3::2/64
+	__simple_if_init v1 v$rp2 2001:db8:4::2/64
+	__simple_if_init v3 v$rp2 2001:db8:5::2/64
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 2001:db8:5::2/64
+	__simple_if_fini v1 2001:db8:4::2/64
+	simple_if_fini $rp2 2001:db8:3::2/64
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/64
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_protocol 802.1ad \
+		vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+	bridge vlan add vid 100 dev w1 pvid untagged
+
+	ip link add name vx100 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT" udp6zerocsumrx
+	ip link set dev vx100 up
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst 2001:db8:3::1 self
+	bridge fdb append dev vx100 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx100 master br2
+	tc qdisc add dev vx100 clsact
+
+	bridge vlan add vid 100 dev vx100 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/64
+        vlan_create w2 20 vw2 $host_addr2/64
+
+	ip route add 2001:db8:3::0/64 nexthop via $nh_addr
+	ip route add $other_in_addr/128 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 2001:db8:4::1 2001:db8:5::1 2001:db8:4::2 \
+			    2001:db8:1::3 2001:db8:2::3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 2001:db8:5::1 2001:db8:4::1 2001:db8:5::2 \
+			     2001:db8:1::4 2001:db8:2::4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2 ": local->local"
+	ping6_test $h1 2001:db8:1::3 ": local->remote 1"
+	ping6_test $h1 2001:db8:1::4 ": local->remote 2"
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router.sh b/tools/testing/selftests/net/forwarding/router.sh
new file mode 100755
index 0000000000..b98ea9449b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router.sh
@@ -0,0 +1,340 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                     +----------------------+
+# | H1                 |                     |                   H2 |
+# |                    |                     |                      |
+# |              $h1 + |                     | + $h2                |
+# |     192.0.2.2/24 | |                     | | 198.51.100.2/24    |
+# | 2001:db8:1::2/64 | |                     | | 2001:db8:2::2/64   |
+# |                  | |                     | |                    |
+# +------------------|-+                     +-|--------------------+
+#                    |                         |
+# +------------------|-------------------------|--------------------+
+# | SW               |                         |                    |
+# |                  |                         |                    |
+# |             $rp1 +                         + $rp2               |
+# |     192.0.2.1/24                             198.51.100.1/24    |
+# | 2001:db8:1::1/64                             2001:db8:2::1/64   |
+# |                                                                 |
+# +-----------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	sip_in_class_e
+	mc_mac_mismatch
+	ipv4_sip_equal_dip
+	ipv6_sip_equal_dip
+	ipv4_dip_link_local
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+require_command $MCD
+require_command $MC_CLI
+table_name=selftests
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	tc qdisc add dev $rp2 clsact
+
+	ip address add 192.0.2.1/24 dev $rp1
+	ip address add 2001:db8:1::1/64 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 2001:db8:2::1/64 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 2001:db8:2::1/64 dev $rp2
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 2001:db8:1::1/64 dev $rp1
+	ip address del 192.0.2.1/24 dev $rp1
+
+	tc qdisc del dev $rp2 clsact
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+start_mcd()
+{
+	SMCROUTEDIR="$(mktemp -d)"
+
+	for ((i = 1; i <= $NUM_NETIFS; ++i)); do
+		echo "phyint ${NETIFS[p$i]} enable" >> \
+			$SMCROUTEDIR/$table_name.conf
+	done
+
+	$MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \
+		-P $SMCROUTEDIR/$table_name.pid
+}
+
+kill_mcd()
+{
+	pkill $MCD
+	rm -rf $SMCROUTEDIR
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1mac=$(mac_get $rp1)
+
+	start_mcd
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	kill_mcd
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+sip_in_class_e()
+{
+	RET=0
+
+	# Disable rpfilter to prevent packets to be dropped because of it.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$rp1.rp_filter 0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower src_ip 240.0.0.1 ip_proto udp action pass
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 240.0.0.1 -b $rp1mac -B 198.51.100.2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP in class E"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	sysctl_restore net.ipv4.conf.$rp1.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+create_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs
+}
+
+delete_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs
+}
+
+__mc_mac_mismatch()
+{
+	local desc=$1; shift
+	local proto=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local flags=${1:-""}; shift
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \
+		flower dst_ip $dip action pass
+
+	create_mcast_sg $rp1 $sip $dip $rp2
+
+	$MZ $flags $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec -b $dmac \
+		-B $dip -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Multicast MAC mismatch: $desc"
+
+	delete_mcast_sg $rp1 $sip $dip $rp2
+	tc filter del dev $rp2 egress protocol $proto pref 1 handle 101 flower
+}
+
+mc_mac_mismatch()
+{
+	__mc_mac_mismatch "IPv4" "ip" 192.0.2.2 225.1.2.3
+	__mc_mac_mismatch "IPv6" "ipv6" 2001:db8:1::2 ff0e::3 "-6"
+}
+
+ipv4_sip_equal_dip()
+{
+	RET=0
+
+	# Disable rpfilter to prevent packets to be dropped because of it.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$rp1.rp_filter 0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower src_ip 198.51.100.2  action pass
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 198.51.100.2 -b $rp1mac -B 198.51.100.2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP is equal to destination IP: IPv4"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	sysctl_restore net.ipv4.conf.$rp1.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+ipv6_sip_equal_dip()
+{
+	RET=0
+
+	tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \
+		flower src_ip 2001:db8:2::2 action pass
+
+	$MZ -6 $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 2001:db8:2::2 -b $rp1mac -B 2001:db8:2::2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP is equal to destination IP: IPv6"
+
+	tc filter del dev $rp2 egress protocol ipv6 pref 1 handle 101 flower
+}
+
+ipv4_dip_link_local()
+{
+	local dip=169.254.1.1
+
+	RET=0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower dst_ip $dip action pass
+
+	ip neigh add 169.254.1.1 lladdr 00:11:22:33:44:55 dev $rp2
+	ip route add 169.254.1.0/24 dev $rp2
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec -b $rp1mac -B $dip -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "IPv4 destination IP is link-local"
+
+	ip route del 169.254.1.0/24 dev $rp2
+	ip neigh del 169.254.1.1 lladdr 00:11:22:33:44:55 dev $rp2
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge.sh b/tools/testing/selftests/net/forwarding/router_bridge.sh
new file mode 100755
index 0000000000..0182eb2abf
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge.sh
@@ -0,0 +1,190 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +------------------------+                           +----------------------+
+# | H1 (vrf)               |                           |             H2 (vrf) |
+# |    + $h1               |                           |  + $h2               |
+# |    | 192.0.2.1/28      |                           |  | 192.0.2.130/28    |
+# |    | 2001:db8:1::1/64  |                           |  | 2001:db8:2::2/64  |
+# |    |                   |                           |  |                   |
+# +----|-------------------+                           +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|-----------------------------+                    + $swp2             |
+# | |  + $swp1      BR1 (802.1q)     |                      192.0.2.129/28    |
+# | |               192.0.2.2/28     |                      2001:db8:2::1/64  |
+# | |               2001:db8:1::1/64 |                                        |
+# | |                                |                                        |
+# | +--------------------------------+                                        |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	config_remaster
+	ping_ipv4
+	ping_ipv6
+	config_remove_pvid
+	ping_ipv4_fails
+	ping_ipv6_fails
+	config_add_pvid
+	ping_ipv4
+	ping_ipv6
+	config_late_pvid
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 address $(mac_get $swp1) \
+		type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+config_remaster()
+{
+	log_info "Remaster bridge slave"
+
+	ip link set dev $swp1 nomaster
+	sleep 2
+	ip link set dev $swp1 master br1
+}
+
+config_remove_pvid()
+{
+	log_info "Remove PVID from the bridge"
+
+	bridge vlan add dev br1 vid 1 self
+	sleep 2
+}
+
+config_add_pvid()
+{
+	log_info "Add PVID to the bridge"
+
+	bridge vlan add dev br1 vid 1 self pvid untagged
+	sleep 2
+}
+
+config_late_pvid()
+{
+	log_info "Add bridge PVID after enslaving port"
+
+	ip link set dev $swp1 nomaster
+	ip link set dev br1 type bridge vlan_default_pvid 0
+	sleep 2
+	ip link set dev $swp1 master br1
+	ip link set dev br1 type bridge vlan_default_pvid 1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+ping_ipv4_fails()
+{
+	ping_test_fails $h1 192.0.2.130
+}
+
+ping_ipv6_fails()
+{
+	ping6_test_fails $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_1d.sh b/tools/testing/selftests/net/forwarding/router_bridge_1d.sh
new file mode 100755
index 0000000000..6d51f2ca72
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_1d.sh
@@ -0,0 +1,185 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------------------------+      +----------------------+
+# | H1 (vrf)                                    |      |             H2 (vrf) |
+# |    + $h1.100            + $h1.200           |      |  + $h2               |
+# |    | 192.0.2.1/28       | 192.0.2.17/28     |      |  | 192.0.2.130/28    |
+# |    | 2001:db8:1::1/64   | 2001:db8:3::1/64  |      |  | 192.0.2.146/28    |
+# |    \_________ __________/                   |      |  | 2001:db8:2::2/64  |
+# |              V                              |      |  | 2001:db8:4::2/64  |
+# |              + $h1                          |      |  |                   |
+# +--------------|------------------------------+      +--|-------------------+
+#                |                                        |
+# +--------------|----------------------------------------|-------------------+
+# | SW           + $swp1                                  + $swp2             |
+# |              |                                          192.0.2.129/28    |
+# |              |                                          192.0.2.145/28    |
+# |              |                                          2001:db8:2::1/64  |
+# |      ________^___________________________               2001:db8:4::1/64  |
+# |     /                                    \                                |
+# | +---|------------------------------+ +---|------------------------------+ |
+# | |   + $swp1.100   BR1 (802.1d)     | |   + $swp1.200   BR2 (802.1d)     | |
+# | |                 192.0.2.2/28     | |                 192.0.2.18/28    | |
+# | |                 2001:db8:1::2/64 | |                 2001:db8:3::2/64 | |
+# | |                                  | |                                  | |
+# | +----------------------------------+ +----------------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	config_remaster
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 100 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 200 v$h1 192.0.2.17/28 2001:db8:3::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -4 route add 192.0.2.144/28 vrf v$h1 nexthop via 192.0.2.18
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+	ip -6 route add 2001:db8:4::/64 vrf v$h1 nexthop via 2001:db8:3::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:4::/64 vrf v$h1
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.144/28 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 200
+	vlan_destroy $h1 100
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64 \
+			   192.0.2.146/28 2001:db8:4::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -4 route add 192.0.2.16/28 vrf v$h2 nexthop via 192.0.2.145
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+	ip -6 route add 2001:db8:3::/64 vrf v$h2 nexthop via 2001:db8:4::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:3::/64 vrf v$h2
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.16/28 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64 \
+			   192.0.2.146/28 2001:db8:4::2/64
+}
+
+router_create()
+{
+	ip link set dev $swp1 up
+
+	vlan_create $swp1 100
+	ip link add name br1 type bridge vlan_filtering 0
+	ip link set dev br1 address $(mac_get $swp1.100)
+	ip link set dev $swp1.100 master br1
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev br1 up
+
+	vlan_create $swp1 200
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 address $(mac_get $swp1.200)
+	ip link set dev $swp1.200 master br2
+	__addr_add_del br2 add 192.0.2.18/28 2001:db8:3::2/64
+	ip link set dev br2 up
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64 \
+				 192.0.2.145/28 2001:db8:4::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64 \
+				 192.0.2.145/28 2001:db8:4::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br2 del 192.0.2.18/28 2001:db8:3::2/64
+	ip link set dev $swp1.200 nomaster
+	ip link del dev br2
+	vlan_destroy $swp1 200
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1.100 nomaster
+	ip link del dev br1
+	vlan_destroy $swp1 100
+
+	ip link set dev $swp1 down
+}
+
+config_remaster()
+{
+	log_info "Remaster bridge slaves"
+
+	ip link set dev $swp1.100 nomaster
+	ip link set dev $swp1.200 nomaster
+	sleep 2
+	ip link set dev $swp1.200 master br2
+	ip link set dev $swp1.100 master br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130 ": via 100"
+	ping_test $h1 192.0.2.146 ": via 200"
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2 ": via 100"
+	ping6_test $h1 2001:db8:4::2 ": via 200"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_1d_lag.sh b/tools/testing/selftests/net/forwarding/router_bridge_1d_lag.sh
new file mode 100755
index 0000000000..e064b946e8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_1d_lag.sh
@@ -0,0 +1,408 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------------------------------+
+# | H1 (vrf)                                   |
+# |                                            |
+# |    + LAG1.100          + LAG1.200          |
+# |    | 192.0.2.1/28      | 192.0.2.17/28     |
+# |    | 2001:db8:1::1/64  | 2001:db8:3:1/64   |
+# |    \___________ _______/                   |
+# |                v                           |
+# |                + LAG1 (team)               |
+# |                |                           |
+# |            ____^____                       |
+# |           /         \                      |
+# |          + $h1       + $h4                 |
+# |          |           |                     |
+# +----------|-----------|---------------------+
+#            |           |
+# +----------|-----------|---------------------+
+# | SW       |           |                     |
+# |          + $swp1     + $swp4               |
+# |           \____ ____/                      |
+# |                v                           |
+# |    LAG2 (team) +                           |
+# |                |                           |
+# |         _______^______________             |
+# |        /                      \            |
+# | +------|------------+ +-------|----------+ |
+# | |      + LAG2.100   | |       + LAG2.200 | |
+# | |                   | |                  | |
+# | |  BR1 (802.1d)     | | BR2 (802.1d)     | |
+# | |  192.0.2.2/28     | | 192.0.2.18/28    | |
+# | |  2001:db8:1::2/64 | | 2001:db8:3:2/64  | |
+# | |                   | |                  | |
+# | +-------------------+ +------------------+ |
+# |                                            |
+# |  + LAG3.100             + LAG3.200         |
+# |  | 192.0.2.129/28       | 192.0.2.145/28   |
+# |  | 2001:db8:2::1/64     | 2001:db8:4::1/64 |
+# |  |                      |                  |
+# |  \_________ ___________/                   |
+# |            v                               |
+# |            + LAG3 (team)                   |
+# |        ____|____                           |
+# |       /         \                          |
+# |       + $swp2   + $swp3                    |
+# |       |         |                          |
+# +-------|---------|--------------------------+
+#         |         |
+# +-------|---------|--------------------------+
+# |       |         |                          |
+# |       + $h2     + $h3                      |
+# |       \____ ___/                           |
+# |            |                               |
+# |            + LAG4 (team)                   |
+# |            |                               |
+# |  __________^__________                     |
+# | /                     \                    |
+# | |                     |                    |
+# | + LAG4.100            + LAG4.200           |
+# |   192.0.2.130/28        192.0.2.146/28     |
+# |   2001:db8:2::2/64      2001:db8:4::2/64   |
+# |                                            |
+# | H2 (vrf)                                   |
+# +--------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG2 slaves )
+	config_deslave_swp4
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_enslave_swp4
+	config_deslave_swp1
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_deslave_swp4
+	config_enslave_swp1
+	config_enslave_swp4
+	config_wait
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG2 itself )
+	config_remaster_lag2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG3 slaves )
+	config_deslave_swp2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_enslave_swp2
+	config_deslave_swp3
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_deslave_swp2
+	config_enslave_swp3
+	config_enslave_swp2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	team_create lag1 lacp
+	ip link set dev lag1 addrgenmode none
+	ip link set dev lag1 address $(mac_get $h1)
+	ip link set dev $h1 master lag1
+	ip link set dev $h4 master lag1
+	simple_if_init lag1
+	ip link set dev $h1 up
+	ip link set dev $h4 up
+
+	vlan_create lag1 100 vlag1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create lag1 200 vlag1 192.0.2.17/28 2001:db8:3::1/64
+
+	ip -4 route add 192.0.2.128/28 vrf vlag1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf vlag1 nexthop via 2001:db8:1::2
+
+	ip -4 route add 192.0.2.144/28 vrf vlag1 nexthop via 192.0.2.18
+	ip -6 route add 2001:db8:4::/64 vrf vlag1 nexthop via 2001:db8:3::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:4::/64 vrf vlag1
+	ip -4 route del 192.0.2.144/28 vrf vlag1
+
+	ip -6 route del 2001:db8:2::/64 vrf vlag1
+	ip -4 route del 192.0.2.128/28 vrf vlag1
+
+	vlan_destroy lag1 200
+	vlan_destroy lag1 100
+
+	ip link set dev $h4 down
+	ip link set dev $h1 down
+	simple_if_fini lag1
+	ip link set dev $h4 nomaster
+	ip link set dev $h1 nomaster
+	team_destroy lag1
+}
+
+h2_create()
+{
+	team_create lag4 lacp
+	ip link set dev lag4 addrgenmode none
+	ip link set dev lag4 address $(mac_get $h2)
+	ip link set dev $h2 master lag4
+	ip link set dev $h3 master lag4
+	simple_if_init lag4
+	ip link set dev $h2 up
+	ip link set dev $h3 up
+
+	vlan_create lag4 100 vlag4 192.0.2.130/28 2001:db8:2::2/64
+	vlan_create lag4 200 vlag4 192.0.2.146/28 2001:db8:4::2/64
+
+	ip -4 route add 192.0.2.0/28 vrf vlag4 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf vlag4 nexthop via 2001:db8:2::1
+
+	ip -4 route add 192.0.2.16/28 vrf vlag4 nexthop via 192.0.2.145
+	ip -6 route add 2001:db8:3::/64 vrf vlag4 nexthop via 2001:db8:4::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:3::/64 vrf vlag4
+	ip -4 route del 192.0.2.16/28 vrf vlag4
+
+	ip -6 route del 2001:db8:1::/64 vrf vlag4
+	ip -4 route del 192.0.2.0/28 vrf vlag4
+
+	vlan_destroy lag4 200
+	vlan_destroy lag4 100
+
+	ip link set dev $h3 down
+	ip link set dev $h2 down
+	simple_if_fini lag4
+	ip link set dev $h3 nomaster
+	ip link set dev $h2 nomaster
+	team_destroy lag4
+}
+
+router_create()
+{
+	team_create lag2 lacp
+	ip link set dev lag2 addrgenmode none
+	ip link set dev lag2 address $(mac_get $swp1)
+	ip link set dev $swp1 master lag2
+	ip link set dev $swp4 master lag2
+
+	vlan_create lag2 100
+	vlan_create lag2 200
+
+	ip link add name br1 type bridge vlan_filtering 0
+	ip link set dev br1 address $(mac_get lag2.100)
+	ip link set dev lag2.100 master br1
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 address $(mac_get lag2.200)
+	ip link set dev lag2.200 master br2
+
+	ip link set dev $swp1 up
+	ip link set dev $swp4 up
+	ip link set dev br1 up
+	ip link set dev br2 up
+
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+	__addr_add_del br2 add 192.0.2.18/28 2001:db8:3::2/64
+
+	team_create lag3 lacp
+	ip link set dev lag3 addrgenmode none
+	ip link set dev lag3 address $(mac_get $swp2)
+	ip link set dev $swp2 master lag3
+	ip link set dev $swp3 master lag3
+	ip link set dev $swp2 up
+	ip link set dev $swp3 up
+
+	vlan_create lag3 100
+	vlan_create lag3 200
+
+	__addr_add_del lag3.100 add 192.0.2.129/28 2001:db8:2::1/64
+	__addr_add_del lag3.200 add 192.0.2.145/28 2001:db8:4::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del lag3.200 del 192.0.2.145/28 2001:db8:4::1/64
+	__addr_add_del lag3.100 del 192.0.2.129/28 2001:db8:2::1/64
+
+	vlan_destroy lag3 200
+	vlan_destroy lag3 100
+
+	ip link set dev $swp3 down
+	ip link set dev $swp2 down
+	ip link set dev $swp3 nomaster
+	ip link set dev $swp2 nomaster
+	team_destroy lag3
+
+	__addr_add_del br2 del 192.0.2.18/28 2001:db8:3::2/64
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev br2 down
+	ip link set dev br1 down
+	ip link set dev $swp4 down
+	ip link set dev $swp1 down
+
+	ip link set dev lag2.200 nomaster
+	ip link del dev br2
+
+	ip link set dev lag2.100 nomaster
+	ip link del dev br1
+
+	vlan_destroy lag2 200
+	vlan_destroy lag2 100
+
+	ip link set dev $swp4 nomaster
+	ip link set dev $swp1 nomaster
+	team_destroy lag2
+}
+
+config_remaster_lag2()
+{
+	log_info "Remaster bridge slaves"
+
+	ip link set dev lag2.200 nomaster
+	ip link set dev lag2.100 nomaster
+	sleep 2
+	ip link set dev lag2.100 master br1
+	ip link set dev lag2.200 master br2
+}
+
+config_deslave()
+{
+	local netdev=$1; shift
+
+	log_info "Deslave $netdev"
+	ip link set dev $netdev down
+	ip link set dev $netdev nomaster
+	ip link set dev $netdev up
+}
+
+config_deslave_swp1()
+{
+	config_deslave $swp1
+}
+
+config_deslave_swp2()
+{
+	config_deslave $swp2
+}
+
+config_deslave_swp3()
+{
+	config_deslave $swp3
+}
+
+config_deslave_swp4()
+{
+	config_deslave $swp4
+}
+
+config_enslave()
+{
+	local netdev=$1; shift
+	local master=$1; shift
+
+	log_info "Enslave $netdev to $master"
+	ip link set dev $netdev down
+	ip link set dev $netdev master $master
+	ip link set dev $netdev up
+}
+
+config_enslave_swp1()
+{
+	config_enslave $swp1 lag2
+}
+
+config_enslave_swp2()
+{
+	config_enslave $swp2 lag3
+}
+
+config_enslave_swp3()
+{
+	config_enslave $swp3 lag3
+}
+
+config_enslave_swp4()
+{
+	config_enslave $swp4 lag2
+}
+
+config_wait()
+{
+	setup_wait_dev lag2
+	setup_wait_dev lag3
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	h4=${NETIFS[p7]}
+	swp4=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test lag1.100 192.0.2.130 ": via 100"
+	ping_test lag1.200 192.0.2.146 ": via 200"
+}
+
+ping_ipv6()
+{
+	ping6_test lag1.100 2001:db8:2::2 ": via 100"
+	ping6_test lag1.200 2001:db8:4::2 ": via 200"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_lag.sh b/tools/testing/selftests/net/forwarding/router_bridge_lag.sh
new file mode 100755
index 0000000000..f05ffe213c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_lag.sh
@@ -0,0 +1,323 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +----------------------------+                   +--------------------------+
+# | H1 (vrf)                   |                   |                 H2 (vrf) |
+# |                            |                   |                          |
+# |        + LAG1 (team)       |                   |     + LAG4 (team)        |
+# |        | 192.0.2.1/28      |                   |     | 192.0.2.130/28     |
+# |        | 2001:db8:1::1/64  |                   |     | 2001:db8:2::2/64   |
+# |      __^___                |                   |   __^_____               |
+# |     /      \               |                   |  /        \              |
+# |    + $h1    + $h4          |                   | + $h2      + $h3         |
+# |    |        |              |                   | |          |             |
+# +----|--------|--------------+                   +-|----------|-------------+
+#      |        |                                    |          |
+# +----|--------|------------------------------------|----------|-------------+
+# | SW |        |                                    |          |             |
+# |    + $swp1  + $swp4                              + $swp2    + $swp3       |
+# |     \__ ___/                                      \__ _____/              |
+# |        v                                             v                    |
+# | +------|-------------------------------+             |                    |
+# | |      + LAG2       BR1 (802.1q)       |             + LAG3 (team)        |
+# | |        (team)       192.0.2.2/28     |               192.0.2.129/28     |
+# | |                     2001:db8:1::2/64 |               2001:db8:2::1/64   |
+# | |                                      |                                  |
+# | +--------------------------------------+                                  |
+# +---------------------------------------------------------------------------+
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG2 slaves )
+	config_deslave_swp4
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_enslave_swp4
+	config_deslave_swp1
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_deslave_swp4
+	config_enslave_swp1
+	config_enslave_swp4
+	config_wait
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG2 itself )
+	config_remaster_lag2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+
+	$(: exercise remastering of LAG3 slaves )
+	config_deslave_swp2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_enslave_swp2
+	config_deslave_swp3
+	config_wait
+	ping_ipv4
+	ping_ipv6
+	config_deslave_swp2
+	config_enslave_swp3
+	config_enslave_swp2
+	config_wait
+	ping_ipv4
+	ping_ipv6
+
+	$(: move LAG3 to a bridge and then out )
+	config_remaster_lag3
+	config_wait
+	ping_ipv4
+	ping_ipv6
+    "}
+NUM_NETIFS=8
+: ${lib_dir:=.}
+source $lib_dir/lib.sh
+$EXTRA_SOURCE
+
+h1_create()
+{
+	team_create lag1 lacp
+	ip link set dev lag1 address $(mac_get $h1)
+	ip link set dev $h1 master lag1
+	ip link set dev $h4 master lag1
+	simple_if_init lag1 192.0.2.1/28 2001:db8:1::1/64
+	ip link set dev $h1 up
+	ip link set dev $h4 up
+	ip -4 route add 192.0.2.128/28 vrf vlag1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf vlag1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf vlag1
+	ip -4 route del 192.0.2.128/28 vrf vlag1
+	ip link set dev $h4 down
+	ip link set dev $h1 down
+	simple_if_fini lag1 192.0.2.1/28 2001:db8:1::1/64
+	ip link set dev $h4 nomaster
+	ip link set dev $h1 nomaster
+	team_destroy lag1
+}
+
+h2_create()
+{
+	team_create lag4 lacp
+	ip link set dev lag4 address $(mac_get $h2)
+	ip link set dev $h2 master lag4
+	ip link set dev $h3 master lag4
+	simple_if_init lag4 192.0.2.130/28 2001:db8:2::2/64
+	ip link set dev $h2 up
+	ip link set dev $h3 up
+	ip -4 route add 192.0.2.0/28 vrf vlag4 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf vlag4 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf vlag4
+	ip -4 route del 192.0.2.0/28 vrf vlag4
+	ip link set dev $h3 down
+	ip link set dev $h2 down
+	simple_if_fini lag4 192.0.2.130/28 2001:db8:2::2/64
+	ip link set dev $h3 nomaster
+	ip link set dev $h2 nomaster
+	team_destroy lag4
+}
+
+router_create()
+{
+	team_create lag2 lacp
+	ip link set dev lag2 address $(mac_get $swp1)
+	ip link set dev $swp1 master lag2
+	ip link set dev $swp4 master lag2
+
+	ip link add name br1 address $(mac_get lag2) \
+		type bridge vlan_filtering 1
+	ip link set dev lag2 master br1
+
+	ip link set dev $swp1 up
+	ip link set dev $swp4 up
+	ip link set dev br1 up
+
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	team_create lag3 lacp
+	ip link set dev lag3 address $(mac_get $swp2)
+	ip link set dev $swp2 master lag3
+	ip link set dev $swp3 master lag3
+	ip link set dev $swp2 up
+	ip link set dev $swp3 up
+	__addr_add_del lag3 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del lag3 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp3 down
+	ip link set dev $swp2 down
+	ip link set dev $swp3 nomaster
+	ip link set dev $swp2 nomaster
+	team_destroy lag3
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp4 down
+	ip link set dev $swp1 down
+	ip link set dev br1 down
+
+	ip link set dev lag2 nomaster
+	ip link del dev br1
+
+	ip link set dev $swp4 nomaster
+	ip link set dev $swp1 nomaster
+	team_destroy lag2
+}
+
+config_remaster_lag2()
+{
+	log_info "Remaster bridge slave"
+
+	ip link set dev lag2 nomaster
+	sleep 2
+	ip link set dev lag2 master br1
+}
+
+config_remaster_lag3()
+{
+	log_info "Move lag3 to the bridge, then out again"
+
+	ip link set dev lag3 master br1
+	sleep 2
+	ip link set dev lag3 nomaster
+}
+
+config_deslave()
+{
+	local netdev=$1; shift
+
+	log_info "Deslave $netdev"
+	ip link set dev $netdev down
+	ip link set dev $netdev nomaster
+	ip link set dev $netdev up
+}
+
+config_deslave_swp1()
+{
+	config_deslave $swp1
+}
+
+config_deslave_swp2()
+{
+	config_deslave $swp2
+}
+
+config_deslave_swp3()
+{
+	config_deslave $swp3
+}
+
+config_deslave_swp4()
+{
+	config_deslave $swp4
+}
+
+config_enslave()
+{
+	local netdev=$1; shift
+	local master=$1; shift
+
+	log_info "Enslave $netdev to $master"
+	ip link set dev $netdev down
+	ip link set dev $netdev master $master
+	ip link set dev $netdev up
+}
+
+config_enslave_swp1()
+{
+	config_enslave $swp1 lag2
+}
+
+config_enslave_swp2()
+{
+	config_enslave $swp2 lag3
+}
+
+config_enslave_swp3()
+{
+	config_enslave $swp3 lag3
+}
+
+config_enslave_swp4()
+{
+	config_enslave $swp4 lag2
+}
+
+config_wait()
+{
+	setup_wait_dev lag2
+	setup_wait_dev lag3
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	h4=${NETIFS[p7]}
+	swp4=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test lag1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test lag1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_pvid_vlan_upper.sh b/tools/testing/selftests/net/forwarding/router_bridge_pvid_vlan_upper.sh
new file mode 100755
index 0000000000..76e4941fef
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_pvid_vlan_upper.sh
@@ -0,0 +1,155 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +----------------------------+
+# |                   H1 (vrf) |
+# |   + $h1.10                 |                      +----------------------+
+# |   | 192.0.2.1/28           |                      |             H2 (vrf) |
+# |   | 2001:db8:1::1/64       |                      |  + $h2               |
+# |   |                        |                      |  | 192.0.2.130/28    |
+# |   + $h1                    |                      |  | 2001:db8:2::2/64  |
+# +---|------------------------+                      +--|-------------------+
+#     |                                                  |
+# +---|--------------------------------------------------|-------------------+
+# |   |                            router (main VRF)     |                   |
+# | +-|----------------------------------+               + $swp2             |
+# | | + $swp1      BR1 (802.1q, pvid=10) |                 192.0.2.129/28    |
+# | |              192.0.2.2/28          |                 2001:db8:2::1/64  |
+# | |              2001:db8:1::2/64      |                                   |
+# | +------------------------------------+                                   |
+# +--------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	shuffle_pvid
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 address $(mac_get $swp1) \
+		type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br1 up
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+
+	bridge vlan add dev br1 vid 10 pvid untagged self
+	bridge vlan add dev $swp1 vid 10
+}
+
+router_destroy()
+{
+	bridge vlan del dev $swp1 vid 10
+	bridge vlan del dev br1 vid 10 self
+
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+shuffle_pvid()
+{
+	log_info "Add and remove VLAN upper for PVID VLAN"
+
+	# Adding and removing a VLAN upper for the PVID VLAN shouldn't change
+	# anything. The address is arbitrary, just to make sure it will be an L3
+	# netdevice.
+	vlan_create br1 10 "" 192.0.2.33/28
+	sleep 1
+	vlan_destroy br1 10
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
new file mode 100755
index 0000000000..b76a4a707a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
@@ -0,0 +1,224 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +------------------------------------------------+   +----------------------+
+# | H1 (vrf)                                       |   |             H2 (vrf) |
+# |    + $h1.555           + $h1.777               |   |  + $h2               |
+# |    | 192.0.2.1/28      | 192.0.2.17/28         |   |  | 192.0.2.130/28    |
+# |    | 2001:db8:1::1/64  | 2001:db8:3::1/64      |   |  | 192.0.2.146/28    |
+# |    | .-----------------'                       |   |  | 2001:db8:2::2/64  |
+# |    |/                                          |   |  | 2001:db8:4::2/64  |
+# |    + $h1                                       |   |  |                   |
+# +----|-------------------------------------------+   +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|-------------------------------+                  + $swp2             |
+# | |  + $swp1                         |                    192.0.2.129/28    |
+# | |    vid 555 777                   |                    192.0.2.145/28    |
+# | |                                  |                    2001:db8:2::1/64  |
+# | |  + BR1 (802.1q)                  |                    2001:db8:4::1/64  |
+# | |    vid 555 pvid untagged         |                                      |
+# | |    192.0.2.2/28                  |                                      |
+# | |    192.0.2.18/28                 |                                      |
+# | |    2001:db8:1::2/64              |                                      |
+# | |    2001:db8:3::2/64              |                                      |
+# | +----------------------------------+                                      |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	vlan
+	config_777
+	ping_ipv4_fails
+	ping_ipv6_fails
+	ping_ipv4_777
+	ping_ipv6_777
+	config_555
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+
+	vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+
+	vlan_create $h1 777 v$h1 192.0.2.17/28 2001:db8:3::1/64
+	ip -4 route add 192.0.2.144/28 vrf v$h1 nexthop via 192.0.2.18
+	ip -6 route add 2001:db8:4::/64 vrf v$h1 nexthop via 2001:db8:3::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:4::/64 vrf v$h1
+	ip -4 route del 192.0.2.144/28 vrf v$h1
+	vlan_destroy $h1 777
+
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 555
+
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64 \
+			   192.0.2.146/28 2001:db8:4::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -4 route add 192.0.2.16/28 vrf v$h2 nexthop via 192.0.2.145
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+	ip -6 route add 2001:db8:3::/64 vrf v$h2 nexthop via 2001:db8:4::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:3::/64 vrf v$h2
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.16/28 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.146/28 2001:db8:4::2/64 \
+			   192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	bridge vlan add dev br1 vid 555 self pvid untagged
+	bridge vlan add dev $swp1 vid 555
+	bridge vlan add dev $swp1 vid 777
+
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+	__addr_add_del br1 add 192.0.2.18/28 2001:db8:3::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+	__addr_add_del $swp2 add 192.0.2.145/28 2001:db8:4::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.145/28 2001:db8:4::1/64
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.18/28 2001:db8:3::2/64
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+config_555()
+{
+	log_info "Configure VLAN 555 as PVID"
+
+	bridge vlan add dev br1 vid 555 self pvid untagged
+	bridge vlan del dev br1 vid 777 self
+	sleep 2
+}
+
+config_777()
+{
+	log_info "Configure VLAN 777 as PVID"
+
+	bridge vlan add dev br1 vid 777 self pvid untagged
+	bridge vlan del dev br1 vid 555 self
+	sleep 2
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlan()
+{
+	RET=0
+
+	bridge vlan add dev br1 vid 333 self
+	check_err $? "Can't add a non-PVID VLAN"
+	bridge vlan del dev br1 vid 333 self
+	check_err $? "Can't remove a non-PVID VLAN"
+
+	log_test "vlan"
+}
+
+ping_ipv4()
+{
+	ping_test $h1.555 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1.555 2001:db8:2::2
+}
+
+ping_ipv4_fails()
+{
+	ping_test_fails $h1.555 192.0.2.130 ": via 555"
+}
+
+ping_ipv6_fails()
+{
+	ping6_test_fails $h1.555 2001:db8:2::2 ": via 555"
+}
+
+ping_ipv4_777()
+{
+	ping_test $h1.777 192.0.2.146 ": via 777"
+}
+
+ping_ipv6_777()
+{
+	ping6_test $h1.777 2001:db8:4::2 ": via 777"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper.sh
new file mode 100755
index 0000000000..215309ea1c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper.sh
@@ -0,0 +1,169 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +------------------------+                           +----------------------+
+# | H1 (vrf)               |                           |             H2 (vrf) |
+# |    + $h1.555           |                           |  + $h2.777           |
+# |    | 192.0.2.1/28      |                           |  | 192.0.2.18/28     |
+# |    | 2001:db8:1::1/64  |                           |  | 2001:db8:2::2/64  |
+# |    |                   |                           |  |                   |
+# |    + $h1               |                           |  + $h2               |
+# +----|-------------------+                           +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
+# | |                                                                       | |
+# | +------+------------------------------------------+---------------------+ |
+# |        |                                          |                       |
+# |        + br1.555                                  + br1.777               |
+# |          192.0.2.2/28                               192.0.2.17/28         |
+# |          2001:db8:1::2/64                           2001:db8:2::1/64      |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	respin_config
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.16/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.16/28 vrf v$h1
+	vlan_destroy $h1 555
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	vlan_create $h2 777 v$h2 192.0.2.18/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.17
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	vlan_destroy $h2 777
+	simple_if_fini $h2
+}
+
+router_create()
+{
+	ip link add name br1 address $(mac_get $swp1) \
+		type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp2 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	bridge vlan add dev br1 vid 555 self
+	bridge vlan add dev br1 vid 777 self
+	bridge vlan add dev $swp1 vid 555
+	bridge vlan add dev $swp2 vid 777
+
+	vlan_create br1 555 "" 192.0.2.2/28 2001:db8:1::2/64
+	vlan_create br1 777 "" 192.0.2.17/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	vlan_destroy br1 777
+	vlan_destroy br1 555
+
+	bridge vlan del dev $swp2 vid 777
+	bridge vlan del dev $swp1 vid 555
+	bridge vlan del dev br1 vid 777 self
+	bridge vlan del dev br1 vid 555 self
+
+	ip link set dev $swp2 down nomaster
+	ip link set dev $swp1 down nomaster
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+respin_config()
+{
+	log_info "Remaster bridge slave"
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 nomaster
+
+	sleep 2
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp2 master br1
+
+	bridge vlan add dev $swp1 vid 555
+	bridge vlan add dev $swp2 vid 777
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper_pvid.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper_pvid.sh
new file mode 100755
index 0000000000..1385584524
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan_upper_pvid.sh
@@ -0,0 +1,171 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +----------------------------+
+# |                   H1 (vrf) |
+# |   + $h1.10                 |                      +----------------------+
+# |   | 192.0.2.1/28           |                      |             H2 (vrf) |
+# |   | 2001:db8:1::1/64       |                      |  + $h2               |
+# |   |                        |                      |  | 192.0.2.130/28    |
+# |   + $h1                    |                      |  | 2001:db8:2::2/64  |
+# +---|------------------------+                      +--|-------------------+
+#     |                                                  |
+# +---|--------------------------------------------------|-------------------+
+# |   |                            router (main VRF)     |                   |
+# | +-|--------------------------+                       + $swp2             |
+# | | + $swp1      BR1 (802.1q)  |                         192.0.2.129/28    |
+# | +-----+----------------------+                         2001:db8:2::1/64  |
+# |       |                                                                  |
+# |       + br1.10                                                           |
+# |         192.0.2.2/28                                                     |
+# |         2001:db8:1::2/64                                                 |
+# +--------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	pvid_set_unset
+	ping_ipv4
+	ping_ipv6
+	pvid_set_move
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 address $(mac_get $swp1) \
+		type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+
+	bridge vlan add dev br1 vid 10 self
+	bridge vlan add dev $swp1 vid 10
+	vlan_create br1 10 "" 192.0.2.2/28 2001:db8:1::2/64
+}
+
+router_destroy()
+{
+	vlan_destroy br1 10
+	bridge vlan del dev $swp1 vid 10
+	bridge vlan del dev br1 vid 10 self
+
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+pvid_set_unset()
+{
+	log_info "Set and unset PVID on VLAN 10"
+
+	bridge vlan add dev br1 vid 10 pvid self
+	sleep 1
+	bridge vlan add dev br1 vid 10 self
+}
+
+pvid_set_move()
+{
+	log_info "Set PVID on VLAN 10, then move it to VLAN 20"
+
+	bridge vlan add dev br1 vid 10 pvid self
+	sleep 1
+	bridge vlan add dev br1 vid 20 pvid self
+}
+
+shuffle_vlan()
+{
+	log_info ""
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_broadcast.sh b/tools/testing/selftests/net/forwarding/router_broadcast.sh
new file mode 100755
index 0000000000..4eac0a06f4
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_broadcast.sh
@@ -0,0 +1,237 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4"
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 198.51.200.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+}
+
+h1_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 198.51.200.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+}
+
+h2_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+h3_create()
+{
+	vrf_create "vrf-h3"
+	ip link set dev $h3 master vrf-h3
+
+	ip link set dev vrf-h3 up
+	ip link set dev $h3 up
+
+	ip address add 198.51.200.2/24 dev $h3
+
+	ip route add 192.0.2.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+	ip route add 198.51.100.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+}
+
+h3_destroy()
+{
+	ip route del 198.51.100.0/24 vrf vrf-h3
+	ip route del 192.0.2.0/24 vrf vrf-h3
+
+	ip address del 198.51.200.2/24 dev $h3
+
+	ip link set dev $h3 down
+	vrf_destroy "vrf-h3"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	ip address add 192.0.2.1/24 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 198.51.200.1/24 dev $rp3
+}
+
+router_destroy()
+{
+	ip address del 198.51.200.1/24 dev $rp3
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 192.0.2.1/24 dev $rp1
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+bc_forwarding_disable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 0
+}
+
+bc_forwarding_enable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 1
+}
+
+bc_forwarding_restore()
+{
+	sysctl_restore net.ipv4.conf.$rp2.bc_forwarding
+	sysctl_restore net.ipv4.conf.$rp1.bc_forwarding
+	sysctl_restore net.ipv4.conf.all.bc_forwarding
+}
+
+ping_test_from()
+{
+	local oif=$1
+	local dip=$2
+	local from=$3
+	local fail=${4:-0}
+
+	RET=0
+
+	log_info "ping $dip, expected reply from $from"
+	ip vrf exec $(master_name_get $oif) \
+		$PING -I $oif $dip -c 10 -i 0.1 -w $PING_TIMEOUT -b 2>&1 \
+		| grep "bytes from $from" > /dev/null
+	check_err_fail $fail $?
+}
+
+ping_ipv4()
+{
+	sysctl_set net.ipv4.icmp_echo_ignore_broadcasts 0
+
+	bc_forwarding_disable
+	log_info "bc_forwarding disabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 192.0.2.1
+	log_test "h1 -> net2: reply from r1 (not forwarding)"
+	ping_test_from $h1 198.51.200.255 192.0.2.1
+	log_test "h1 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1
+	log_test "h1 -> net1: reply from r1 (not dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 198.51.100.1
+	log_test "h2 -> net1: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.100.1
+	log_test "h2 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1
+	log_test "h2 -> net2: reply from r1 (not dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	bc_forwarding_enable
+	log_info "bc_forwarding enabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 198.51.100.2
+	log_test "h1 -> net2: reply from h2 (forwarding)"
+	ping_test_from $h1 198.51.200.255 198.51.200.2
+	log_test "h1 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1 1
+	log_test "h1 -> net1: no reply (dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 192.0.2.2
+	log_test "h2 -> net1: reply from h1 (forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.200.2
+	log_test "h2 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1 1
+	log_test "h2 -> net2: no reply (dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	sysctl_restore net.ipv4.icmp_echo_ignore_broadcasts
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
new file mode 100755
index 0000000000..a0d612e049
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
@@ -0,0 +1,425 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	multipath_test
+	ping_ipv4_blackhole
+	ping_ipv6_blackhole
+"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router1_create()
+{
+	vrf_create "vrf-r1"
+	ip link set dev $rp11 master vrf-r1
+	ip link set dev $rp12 master vrf-r1
+	ip link set dev $rp13 master vrf-r1
+
+	ip link set dev vrf-r1 up
+	ip link set dev $rp11 up
+	ip link set dev $rp12 up
+	ip link set dev $rp13 up
+
+	ip address add 192.0.2.1/24 dev $rp11
+	ip address add 2001:db8:1::1/64 dev $rp11
+
+	ip address add 169.254.2.12/24 dev $rp12
+	ip address add fe80:2::12/64 dev $rp12
+
+	ip address add 169.254.3.13/24 dev $rp13
+	ip address add fe80:3::13/64 dev $rp13
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-r1
+	ip route del 198.51.100.0/24 vrf vrf-r1
+
+	ip address del fe80:3::13/64 dev $rp13
+	ip address del 169.254.3.13/24 dev $rp13
+
+	ip address del fe80:2::12/64 dev $rp12
+	ip address del 169.254.2.12/24 dev $rp12
+
+	ip address del 2001:db8:1::1/64 dev $rp11
+	ip address del 192.0.2.1/24 dev $rp11
+
+	ip nexthop del id 103
+	ip nexthop del id 101
+	ip nexthop del id 102
+	ip nexthop del id 106
+	ip nexthop del id 104
+	ip nexthop del id 105
+
+	ip link set dev $rp13 down
+	ip link set dev $rp12 down
+	ip link set dev $rp11 down
+
+	vrf_destroy "vrf-r1"
+}
+
+router2_create()
+{
+	vrf_create "vrf-r2"
+	ip link set dev $rp21 master vrf-r2
+	ip link set dev $rp22 master vrf-r2
+	ip link set dev $rp23 master vrf-r2
+
+	ip link set dev vrf-r2 up
+	ip link set dev $rp21 up
+	ip link set dev $rp22 up
+	ip link set dev $rp23 up
+
+	ip address add 198.51.100.1/24 dev $rp21
+	ip address add 2001:db8:2::1/64 dev $rp21
+
+	ip address add 169.254.2.22/24 dev $rp22
+	ip address add fe80:2::22/64 dev $rp22
+
+	ip address add 169.254.3.23/24 dev $rp23
+	ip address add fe80:3::23/64 dev $rp23
+}
+
+router2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-r2
+	ip route del 192.0.2.0/24 vrf vrf-r2
+
+	ip address del fe80:3::23/64 dev $rp23
+	ip address del 169.254.3.23/24 dev $rp23
+
+	ip address del fe80:2::22/64 dev $rp22
+	ip address del 169.254.2.22/24 dev $rp22
+
+	ip address del 2001:db8:2::1/64 dev $rp21
+	ip address del 198.51.100.1/24 dev $rp21
+
+	ip nexthop del id 201
+	ip nexthop del id 202
+	ip nexthop del id 204
+	ip nexthop del id 205
+
+	ip link set dev $rp23 down
+	ip link set dev $rp22 down
+	ip link set dev $rp21 down
+
+	vrf_destroy "vrf-r2"
+}
+
+routing_nh_obj()
+{
+	ip nexthop add id 101 via 169.254.2.22 dev $rp12
+	ip nexthop add id 102 via 169.254.3.23 dev $rp13
+	ip nexthop add id 103 group 101/102
+	ip route add 198.51.100.0/24 vrf vrf-r1 nhid 103
+
+	ip nexthop add id 104 via fe80:2::22 dev $rp12
+	ip nexthop add id 105 via fe80:3::23 dev $rp13
+	ip nexthop add id 106 group 104/105
+	ip route add 2001:db8:2::/64 vrf vrf-r1 nhid 106
+
+	ip nexthop add id 201 via 169.254.2.12 dev $rp22
+	ip nexthop add id 202 via 169.254.3.13 dev $rp23
+	ip nexthop add id 203 group 201/202
+	ip route add 192.0.2.0/24 vrf vrf-r2 nhid 203
+
+	ip nexthop add id 204 via fe80:2::12 dev $rp22
+	ip nexthop add id 205 via fe80:3::13 dev $rp23
+	ip nexthop add id 206 group 204/205
+	ip route add 2001:db8:1::/64 vrf vrf-r2 nhid 206
+}
+
+multipath4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the configured weights.
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight_rp12/102,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	# Restore settings.
+	ip nexthop replace id 103 group 101/102
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the configured weights.
+	sysctl_set net.ipv6.fib_multipath_hash_policy 1
+
+	ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	$MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	ip nexthop replace id 106 group 104/105
+
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	# Generate 16384 echo requests, each with a random flow label.
+	for _ in $(seq 1 16384); do
+		ip vrf exec vrf-h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1
+	done
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	ip nexthop replace id 106 group 104/105
+}
+
+multipath_test()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv4 multipath tests with IPv6 link-local nexthops"
+	ip nexthop replace id 101 via fe80:2::22 dev $rp12
+	ip nexthop replace id 102 via fe80:3::23 dev $rp13
+
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 102 via 169.254.3.23 dev $rp13
+	ip nexthop replace id 101 via 169.254.2.22 dev $rp12
+
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+ping_ipv4_blackhole()
+{
+	RET=0
+
+	ip nexthop add id 1001 blackhole
+	ip nexthop add id 1002 group 1001
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1001
+	ping_do $h1 198.51.100.2
+	check_fail $? "ping did not fail when using a blackhole nexthop"
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 1002
+	ping_do $h1 198.51.100.2
+	check_fail $? "ping did not fail when using a blackhole nexthop group"
+
+	ip route replace 198.51.100.0/24 vrf vrf-r1 nhid 103
+	ping_do $h1 198.51.100.2
+	check_err $? "ping failed with a valid nexthop"
+
+	log_test "IPv4 blackhole ping"
+
+	ip nexthop del id 1002
+	ip nexthop del id 1001
+}
+
+ping_ipv6_blackhole()
+{
+	RET=0
+
+	ip -6 nexthop add id 1001 blackhole
+	ip nexthop add id 1002 group 1001
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1001
+	ping6_do $h1 2001:db8:2::2
+	check_fail $? "ping did not fail when using a blackhole nexthop"
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 1002
+	ping6_do $h1 2001:db8:2::2
+	check_fail $? "ping did not fail when using a blackhole nexthop group"
+
+	ip route replace 2001:db8:2::/64 vrf vrf-r1 nhid 106
+	ping6_do $h1 2001:db8:2::2
+	check_err $? "ping failed with a valid nexthop"
+
+	log_test "IPv6 blackhole ping"
+
+	ip nexthop del id 1002
+	ip -6 nexthop del id 1001
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp11=${NETIFS[p2]}
+
+	rp12=${NETIFS[p3]}
+	rp22=${NETIFS[p4]}
+
+	rp13=${NETIFS[p5]}
+	rp23=${NETIFS[p6]}
+
+	rp21=${NETIFS[p7]}
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router1_create
+	router2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+ip nexthop ls >/dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "Nexthop objects not supported; skipping tests"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+routing_nh_obj
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
new file mode 100755
index 0000000000..cb08ffe235
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh_res.sh
@@ -0,0 +1,400 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	multipath_test
+"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router1_create()
+{
+	vrf_create "vrf-r1"
+	ip link set dev $rp11 master vrf-r1
+	ip link set dev $rp12 master vrf-r1
+	ip link set dev $rp13 master vrf-r1
+
+	ip link set dev vrf-r1 up
+	ip link set dev $rp11 up
+	ip link set dev $rp12 up
+	ip link set dev $rp13 up
+
+	ip address add 192.0.2.1/24 dev $rp11
+	ip address add 2001:db8:1::1/64 dev $rp11
+
+	ip address add 169.254.2.12/24 dev $rp12
+	ip address add fe80:2::12/64 dev $rp12
+
+	ip address add 169.254.3.13/24 dev $rp13
+	ip address add fe80:3::13/64 dev $rp13
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-r1
+	ip route del 198.51.100.0/24 vrf vrf-r1
+
+	ip address del fe80:3::13/64 dev $rp13
+	ip address del 169.254.3.13/24 dev $rp13
+
+	ip address del fe80:2::12/64 dev $rp12
+	ip address del 169.254.2.12/24 dev $rp12
+
+	ip address del 2001:db8:1::1/64 dev $rp11
+	ip address del 192.0.2.1/24 dev $rp11
+
+	ip nexthop del id 103
+	ip nexthop del id 101
+	ip nexthop del id 102
+	ip nexthop del id 106
+	ip nexthop del id 104
+	ip nexthop del id 105
+
+	ip link set dev $rp13 down
+	ip link set dev $rp12 down
+	ip link set dev $rp11 down
+
+	vrf_destroy "vrf-r1"
+}
+
+router2_create()
+{
+	vrf_create "vrf-r2"
+	ip link set dev $rp21 master vrf-r2
+	ip link set dev $rp22 master vrf-r2
+	ip link set dev $rp23 master vrf-r2
+
+	ip link set dev vrf-r2 up
+	ip link set dev $rp21 up
+	ip link set dev $rp22 up
+	ip link set dev $rp23 up
+
+	ip address add 198.51.100.1/24 dev $rp21
+	ip address add 2001:db8:2::1/64 dev $rp21
+
+	ip address add 169.254.2.22/24 dev $rp22
+	ip address add fe80:2::22/64 dev $rp22
+
+	ip address add 169.254.3.23/24 dev $rp23
+	ip address add fe80:3::23/64 dev $rp23
+}
+
+router2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-r2
+	ip route del 192.0.2.0/24 vrf vrf-r2
+
+	ip address del fe80:3::23/64 dev $rp23
+	ip address del 169.254.3.23/24 dev $rp23
+
+	ip address del fe80:2::22/64 dev $rp22
+	ip address del 169.254.2.22/24 dev $rp22
+
+	ip address del 2001:db8:2::1/64 dev $rp21
+	ip address del 198.51.100.1/24 dev $rp21
+
+	ip nexthop del id 201
+	ip nexthop del id 202
+	ip nexthop del id 204
+	ip nexthop del id 205
+
+	ip link set dev $rp23 down
+	ip link set dev $rp22 down
+	ip link set dev $rp21 down
+
+	vrf_destroy "vrf-r2"
+}
+
+routing_nh_obj()
+{
+	ip nexthop add id 101 via 169.254.2.22 dev $rp12
+	ip nexthop add id 102 via 169.254.3.23 dev $rp13
+	ip nexthop add id 103 group 101/102 type resilient buckets 512 \
+		idle_timer 0
+	ip route add 198.51.100.0/24 vrf vrf-r1 nhid 103
+
+	ip nexthop add id 104 via fe80:2::22 dev $rp12
+	ip nexthop add id 105 via fe80:3::23 dev $rp13
+	ip nexthop add id 106 group 104/105 type resilient buckets 512 \
+		idle_timer 0
+	ip route add 2001:db8:2::/64 vrf vrf-r1 nhid 106
+
+	ip nexthop add id 201 via 169.254.2.12 dev $rp22
+	ip nexthop add id 202 via 169.254.3.13 dev $rp23
+	ip nexthop add id 203 group 201/202 type resilient buckets 512 \
+		idle_timer 0
+	ip route add 192.0.2.0/24 vrf vrf-r2 nhid 203
+
+	ip nexthop add id 204 via fe80:2::12 dev $rp22
+	ip nexthop add id 205 via fe80:3::13 dev $rp23
+	ip nexthop add id 206 group 204/205 type resilient buckets 512 \
+		idle_timer 0
+	ip route add 2001:db8:1::/64 vrf vrf-r2 nhid 206
+}
+
+multipath4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the provided weights.
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	# Restore settings.
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the provided weights.
+	sysctl_set net.ipv6.fib_multipath_hash_policy 1
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	$MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath_test()
+{
+	# Without an idle timer, weight replacement should happen immediately.
+	log_info "Running multipath tests without an idle timer"
+	ip nexthop replace id 103 group 101/102 type resilient idle_timer 0
+	ip nexthop replace id 106 group 104/105 type resilient idle_timer 0
+
+	log_info "Running IPv4 multipath tests"
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+	multipath4_test "ECMP" 1 1
+	ip nexthop replace id 103 group 101,2/102,1 type resilient
+	multipath4_test "Weighted MP 2:1" 2 1
+	ip nexthop replace id 103 group 101,11/102,45 type resilient
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+	multipath6_l4_test "ECMP" 1 1
+	ip nexthop replace id 106 group 104,2/105,1 type resilient
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	ip nexthop replace id 106 group 104,11/105,45 type resilient
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+
+	# With an idle timer, weight replacement should not happen, so the
+	# expected ratio should always be the initial one (1:1).
+	log_info "Running multipath tests with an idle timer of 120 seconds"
+	ip nexthop replace id 103 group 101/102 type resilient idle_timer 120
+	ip nexthop replace id 106 group 104/105 type resilient idle_timer 120
+
+	log_info "Running IPv4 multipath tests"
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+	multipath4_test "ECMP" 1 1
+	ip nexthop replace id 103 group 101,2/102,1 type resilient
+	multipath4_test "Weighted MP 2:1" 1 1
+	ip nexthop replace id 103 group 101,11/102,45 type resilient
+	multipath4_test "Weighted MP 11:45" 1 1
+
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+	multipath6_l4_test "ECMP" 1 1
+	ip nexthop replace id 106 group 104,2/105,1 type resilient
+	multipath6_l4_test "Weighted MP 2:1" 1 1
+	ip nexthop replace id 106 group 104,11/105,45 type resilient
+	multipath6_l4_test "Weighted MP 11:45" 1 1
+
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+
+	# With a short idle timer and enough idle time, weight replacement
+	# should happen.
+	log_info "Running multipath tests with an idle timer of 5 seconds"
+	ip nexthop replace id 103 group 101/102 type resilient idle_timer 5
+	ip nexthop replace id 106 group 104/105 type resilient idle_timer 5
+
+	log_info "Running IPv4 multipath tests"
+	sleep 10
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+	multipath4_test "ECMP" 1 1
+	sleep 10
+	ip nexthop replace id 103 group 101,2/102,1 type resilient
+	multipath4_test "Weighted MP 2:1" 2 1
+	sleep 10
+	ip nexthop replace id 103 group 101,11/102,45 type resilient
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 103 group 101,1/102,1 type resilient
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	sleep 10
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+	multipath6_l4_test "ECMP" 1 1
+	sleep 10
+	ip nexthop replace id 106 group 104,2/105,1 type resilient
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	sleep 10
+	ip nexthop replace id 106 group 104,11/105,45 type resilient
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+
+	ip nexthop replace id 106 group 104,1/105,1 type resilient
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp11=${NETIFS[p2]}
+
+	rp12=${NETIFS[p3]}
+	rp22=${NETIFS[p4]}
+
+	rp13=${NETIFS[p5]}
+	rp23=${NETIFS[p6]}
+
+	rp21=${NETIFS[p7]}
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router1_create
+	router2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+ip nexthop ls >/dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "Nexthop objects not supported; skipping tests"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+routing_nh_obj
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_multicast.sh b/tools/testing/selftests/net/forwarding/router_multicast.sh
new file mode 100755
index 0000000000..5a58b1ec8a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_multicast.sh
@@ -0,0 +1,506 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +------------------+
+# | H1 (v$h1)        |
+# | 2001:db8:1::2/64 |
+# | 198.51.100.2/28  |
+# |         $h1 +    |
+# +-------------|----+
+#               |
+# +-------------|-------------------------------+
+# | SW1         |                               |
+# |        $rp1 +                               |
+# | 198.51.100.1/28                             |
+# | 2001:db8:1::1/64                            |
+# |                                             |
+# | 2001:db8:2::1/64           2001:db8:3::1/64 |
+# | 198.51.100.17/28           198.51.100.33/28 |
+# |         $rp2 +                     $rp3 +   |
+# +--------------|--------------------------|---+
+#                |                          |
+#                |                          |
+# +--------------|---+       +--------------|---+
+# | H2 (v$h2)    |   |       | H3 (v$h3)    |   |
+# |          $h2 +   |       |          $h3 +   |
+# | 198.51.100.18/28 |       | 198.51.100.34/28 |
+# | 2001:db8:2::2/64 |       | 2001:db8:3::2/64 |
+# +------------------+       +------------------+
+#
+
+ALL_TESTS="mcast_v4 mcast_v6 rpf_v4 rpf_v6 unres_v4 unres_v6"
+NUM_NETIFS=6
+source lib.sh
+source tc_common.sh
+
+require_command $MCD
+require_command $MC_CLI
+table_name=selftests
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.2/28 2001:db8:1::2/64
+
+	ip route add 198.51.100.16/28 vrf v$h1 nexthop via 198.51.100.1
+	ip route add 198.51.100.32/28 vrf v$h1 nexthop via 198.51.100.1
+
+	ip route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::1
+	ip route add 2001:db8:3::/64 vrf v$h1 nexthop via 2001:db8:1::1
+
+	tc qdisc add dev $h1 ingress
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 ingress
+
+	ip route del 2001:db8:3::/64 vrf v$h1
+	ip route del 2001:db8:2::/64 vrf v$h1
+
+	ip route del 198.51.100.32/28 vrf v$h1
+	ip route del 198.51.100.16/28 vrf v$h1
+
+	simple_if_fini $h1 198.51.100.2/28 2001:db8:1::2/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.18/28 2001:db8:2::2/64
+
+	ip route add 198.51.100.0/28 vrf v$h2 nexthop via 198.51.100.17
+	ip route add 198.51.100.32/28 vrf v$h2 nexthop via 198.51.100.17
+
+	ip route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+	ip route add 2001:db8:3::/64 vrf v$h2 nexthop via 2001:db8:2::1
+
+	tc qdisc add dev $h2 ingress
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 ingress
+
+	ip route del 2001:db8:3::/64 vrf v$h2
+	ip route del 2001:db8:1::/64 vrf v$h2
+
+	ip route del 198.51.100.32/28 vrf v$h2
+	ip route del 198.51.100.0/28 vrf v$h2
+
+	simple_if_fini $h2 198.51.100.18/28 2001:db8:2::2/64
+}
+
+h3_create()
+{
+	simple_if_init $h3 198.51.100.34/28 2001:db8:3::2/64
+
+	ip route add 198.51.100.0/28 vrf v$h3 nexthop via 198.51.100.33
+	ip route add 198.51.100.16/28 vrf v$h3 nexthop via 198.51.100.33
+
+	ip route add 2001:db8:1::/64 vrf v$h3 nexthop via 2001:db8:3::1
+	ip route add 2001:db8:2::/64 vrf v$h3 nexthop via 2001:db8:3::1
+
+	tc qdisc add dev $h3 ingress
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 ingress
+
+	ip route del 2001:db8:2::/64 vrf v$h3
+	ip route del 2001:db8:1::/64 vrf v$h3
+
+	ip route del 198.51.100.16/28 vrf v$h3
+	ip route del 198.51.100.0/28 vrf v$h3
+
+	simple_if_fini $h3 198.51.100.34/28 2001:db8:3::2/64
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	ip address add 198.51.100.1/28 dev $rp1
+	ip address add 198.51.100.17/28 dev $rp2
+	ip address add 198.51.100.33/28 dev $rp3
+
+	ip address add 2001:db8:1::1/64 dev $rp1
+	ip address add 2001:db8:2::1/64 dev $rp2
+	ip address add 2001:db8:3::1/64 dev $rp3
+
+	tc qdisc add dev $rp3 ingress
+}
+
+router_destroy()
+{
+	tc qdisc del dev $rp3 ingress
+
+	ip address del 2001:db8:3::1/64 dev $rp3
+	ip address del 2001:db8:2::1/64 dev $rp2
+	ip address del 2001:db8:1::1/64 dev $rp1
+
+	ip address del 198.51.100.33/28 dev $rp3
+	ip address del 198.51.100.17/28 dev $rp2
+	ip address del 198.51.100.1/28 dev $rp1
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+start_mcd()
+{
+	SMCROUTEDIR="$(mktemp -d)"
+
+	for ((i = 1; i <= $NUM_NETIFS; ++i)); do
+		echo "phyint ${NETIFS[p$i]} enable" >> \
+			$SMCROUTEDIR/$table_name.conf
+	done
+
+	$MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \
+		-P $SMCROUTEDIR/$table_name.pid
+}
+
+kill_mcd()
+{
+	pkill $MCD
+	rm -rf $SMCROUTEDIR
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	start_mcd
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	kill_mcd
+}
+
+create_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs
+}
+
+delete_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+        $MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs
+}
+
+mcast_v4()
+{
+	# Add two interfaces to an MC group, send a packet to the MC group and
+	# verify packets are received on both. Then delete the route and verify
+	# packets are no longer received.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 122 flower \
+		dst_ip 225.1.2.3 action drop
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 133 flower \
+		dst_ip 225.1.2.3 action drop
+
+	create_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	# Send frames with the corresponding L2 destination address.
+	$MZ $h1 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	$MZ $h1 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast received on host although deleted"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast received on second host although deleted"
+
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 133 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 122 flower
+
+	log_test "mcast IPv4"
+}
+
+mcast_v6()
+{
+	# Add two interfaces to an MC group, send a packet to the MC group and
+	# verify packets are received on both. Then delete the route and verify
+	# packets are no longer received.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 122 flower \
+		dst_ip ff0e::3 action drop
+	tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 133 flower \
+		dst_ip ff0e::3 action drop
+
+	create_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	# Send frames with the corresponding L2 destination address.
+	$MZ $h1 -6 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 \
+		-b 33:33:00:00:00:03 -A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	$MZ $h1 -6 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 \
+		-b 33:33:00:00:00:03 -A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast received on first host although deleted"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast received on second host although deleted"
+
+	tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 133 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 122 flower
+
+	log_test "mcast IPv6"
+}
+
+rpf_v4()
+{
+	# Add a multicast route from first router port to the other two. Send
+	# matching packets and test that both hosts receive them. Then, send
+	# the same packets via the third router port and test that they do not
+	# reach any host due to RPF check. A filter with 'skip_hw' is added to
+	# test that devices capable of multicast routing offload trap those
+	# packets. The filter is essentialy a NOP in other scenarios.
+
+	RET=0
+
+	tc filter add dev $h1 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $rp3 ingress protocol ip pref 1 handle 1 flower \
+		skip_hw dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action pass
+
+	create_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	$MZ $h1 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 5
+	check_err $? "Multicast not received on second host"
+
+	$MZ $h3 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h1 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast received on second host when should not"
+	tc_check_packets "dev $rp3 ingress" 1 5
+	check_err $? "Packets not trapped due to RPF check"
+
+	delete_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	tc filter del dev $rp3 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h1 ingress protocol ip pref 1 handle 1 flower
+
+	log_test "RPF IPv4"
+}
+
+rpf_v6()
+{
+	RET=0
+
+	tc filter add dev $h1 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower \
+		skip_hw dst_ip ff0e::3 ip_proto udp dst_port 12345 action pass
+
+	create_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	$MZ $h1 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 5
+	check_err $? "Multicast not received on second host"
+
+	$MZ $h3 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h1 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast received on second host when should not"
+	tc_check_packets "dev $rp3 ingress" 1 5
+	check_err $? "Packets not trapped due to RPF check"
+
+	delete_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	tc filter del dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h1 ingress protocol ipv6 pref 1 handle 1 flower
+
+	log_test "RPF IPv6"
+}
+
+unres_v4()
+{
+	# Send a multicast packet not corresponding to an installed route,
+	# causing the kernel to queue the packet for resolution and emit an
+	# IGMPMSG_NOCACHE notification. smcrouted will react to this
+	# notification by consulting its (*, G) list and installing an (S, G)
+	# route, which will be used to forward the queued packet.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+
+	# Forwarding should fail before installing a matching (*, G).
+	$MZ $h1 -c 1 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h3 ingress" 1 0
+	check_err $? "Multicast received on second host when should not"
+
+	# Create (*, G). Will not be installed in the kernel.
+	create_mcast_sg $rp1 0.0.0.0 225.1.2.3 $rp2 $rp3
+
+	$MZ $h1 -c 1 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 1
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 0.0.0.0 225.1.2.3 $rp2 $rp3
+
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1 flower
+
+	log_test "Unresolved queue IPv4"
+}
+
+unres_v6()
+{
+	# Send a multicast packet not corresponding to an installed route,
+	# causing the kernel to queue the packet for resolution and emit an
+	# MRT6MSG_NOCACHE notification. smcrouted will react to this
+	# notification by consulting its (*, G) list and installing an (S, G)
+	# route, which will be used to forward the queued packet.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+
+	# Forwarding should fail before installing a matching (*, G).
+	$MZ $h1 -6 -c 1 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h3 ingress" 1 0
+	check_err $? "Multicast received on second host when should not"
+
+	# Create (*, G). Will not be installed in the kernel.
+	create_mcast_sg $rp1 :: ff0e::3 $rp2 $rp3
+
+	$MZ $h1 -6 -c 1 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 1
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 1
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 :: ff0e::3 $rp2 $rp3
+
+	tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 1 flower
+
+	log_test "Unresolved queue IPv6"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
new file mode 100755
index 0000000000..464821c587
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -0,0 +1,342 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 multipath_test"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router1_create()
+{
+	vrf_create "vrf-r1"
+	ip link set dev $rp11 master vrf-r1
+	ip link set dev $rp12 master vrf-r1
+	ip link set dev $rp13 master vrf-r1
+
+	ip link set dev vrf-r1 up
+	ip link set dev $rp11 up
+	ip link set dev $rp12 up
+	ip link set dev $rp13 up
+
+	ip address add 192.0.2.1/24 dev $rp11
+	ip address add 2001:db8:1::1/64 dev $rp11
+
+	ip address add 169.254.2.12/24 dev $rp12
+	ip address add fe80:2::12/64 dev $rp12
+
+	ip address add 169.254.3.13/24 dev $rp13
+	ip address add fe80:3::13/64 dev $rp13
+
+	ip route add 198.51.100.0/24 vrf vrf-r1 \
+		nexthop via 169.254.2.22 dev $rp12 \
+		nexthop via 169.254.3.23 dev $rp13
+	ip route add 2001:db8:2::/64 vrf vrf-r1 \
+		nexthop via fe80:2::22 dev $rp12 \
+		nexthop via fe80:3::23 dev $rp13
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-r1
+	ip route del 198.51.100.0/24 vrf vrf-r1
+
+	ip address del fe80:3::13/64 dev $rp13
+	ip address del 169.254.3.13/24 dev $rp13
+
+	ip address del fe80:2::12/64 dev $rp12
+	ip address del 169.254.2.12/24 dev $rp12
+
+	ip address del 2001:db8:1::1/64 dev $rp11
+	ip address del 192.0.2.1/24 dev $rp11
+
+	ip link set dev $rp13 down
+	ip link set dev $rp12 down
+	ip link set dev $rp11 down
+
+	vrf_destroy "vrf-r1"
+}
+
+router2_create()
+{
+	vrf_create "vrf-r2"
+	ip link set dev $rp21 master vrf-r2
+	ip link set dev $rp22 master vrf-r2
+	ip link set dev $rp23 master vrf-r2
+
+	ip link set dev vrf-r2 up
+	ip link set dev $rp21 up
+	ip link set dev $rp22 up
+	ip link set dev $rp23 up
+
+	ip address add 198.51.100.1/24 dev $rp21
+	ip address add 2001:db8:2::1/64 dev $rp21
+
+	ip address add 169.254.2.22/24 dev $rp22
+	ip address add fe80:2::22/64 dev $rp22
+
+	ip address add 169.254.3.23/24 dev $rp23
+	ip address add fe80:3::23/64 dev $rp23
+
+	ip route add 192.0.2.0/24 vrf vrf-r2 \
+		nexthop via 169.254.2.12 dev $rp22 \
+		nexthop via 169.254.3.13 dev $rp23
+	ip route add 2001:db8:1::/64 vrf vrf-r2 \
+		nexthop via fe80:2::12 dev $rp22 \
+		nexthop via fe80:3::13 dev $rp23
+}
+
+router2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-r2
+	ip route del 192.0.2.0/24 vrf vrf-r2
+
+	ip address del fe80:3::23/64 dev $rp23
+	ip address del 169.254.3.23/24 dev $rp23
+
+	ip address del fe80:2::22/64 dev $rp22
+	ip address del 169.254.2.22/24 dev $rp22
+
+	ip address del 2001:db8:2::1/64 dev $rp21
+	ip address del 198.51.100.1/24 dev $rp21
+
+	ip link set dev $rp23 down
+	ip link set dev $rp22 down
+	ip link set dev $rp21 down
+
+	vrf_destroy "vrf-r2"
+}
+
+multipath4_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       # Transmit multiple flows from h1 to h2 and make sure they are
+       # distributed between both multipath links (rp12 and rp13)
+       # according to the configured weights.
+       sysctl_set net.ipv4.fib_multipath_hash_policy 1
+       ip route replace 198.51.100.0/24 vrf vrf-r1 \
+               nexthop via 169.254.2.22 dev $rp12 weight $weight_rp12 \
+               nexthop via 169.254.3.23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       # Restore settings.
+       ip route replace 198.51.100.0/24 vrf vrf-r1 \
+               nexthop via 169.254.2.22 dev $rp12 \
+               nexthop via 169.254.3.23 dev $rp13
+       sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       # Transmit multiple flows from h1 to h2 and make sure they are
+       # distributed between both multipath links (rp12 and rp13)
+       # according to the configured weights.
+       sysctl_set net.ipv6.fib_multipath_hash_policy 1
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 weight $weight_rp12 \
+	       nexthop via fe80:3::23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 \
+	       nexthop via fe80:3::23 dev $rp13
+
+       sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 weight $weight_rp12 \
+	       nexthop via fe80:3::23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       # Generate 16384 echo requests, each with a random flow label.
+       for _ in $(seq 1 16384); do
+	       ip vrf exec vrf-h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+       done
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 \
+	       nexthop via fe80:3::23 dev $rp13
+}
+
+multipath_test()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp11=${NETIFS[p2]}
+
+	rp12=${NETIFS[p3]}
+	rp22=${NETIFS[p4]}
+
+	rp13=${NETIFS[p5]}
+	rp23=${NETIFS[p6]}
+
+	rp21=${NETIFS[p7]}
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router1_create
+	router2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_nh.sh b/tools/testing/selftests/net/forwarding/router_nh.sh
new file mode 100755
index 0000000000..f3a53738bd
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_nh.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	tc qdisc add dev $rp2 clsact
+
+	ip address add 192.0.2.1/24 dev $rp1
+	ip address add 2001:db8:1::1/64 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 2001:db8:2::1/64 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 2001:db8:2::1/64 dev $rp2
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 2001:db8:1::1/64 dev $rp1
+	ip address del 192.0.2.1/24 dev $rp1
+
+	tc qdisc del dev $rp2 clsact
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+routing_nh_obj()
+{
+	# Create the nexthops as AF_INET6, so that IPv4 and IPv6 routes could
+	# use them.
+	ip -6 nexthop add id 101 dev $rp1
+	ip -6 nexthop add id 102 dev $rp2
+
+	ip route replace 192.0.2.0/24 nhid 101
+	ip route replace 2001:db8:1::/64 nhid 101
+	ip route replace 198.51.100.0/24 nhid 102
+	ip route replace 2001:db8:2::/64 nhid 102
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1mac=$(mac_get $rp1)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+routing_nh_obj
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_vid_1.sh b/tools/testing/selftests/net/forwarding/router_vid_1.sh
new file mode 100755
index 0000000000..865c9f7d81
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_vid_1.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                     +----------------------+
+# | H1                 |                     |                   H2 |
+# |                    |                     |                      |
+# |            $h1.1 + |                     | + $h2.1              |
+# |     192.0.2.2/24 | |                     | | 198.51.100.2/24    |
+# | 2001:db8:1::2/64 | |                     | | 2001:db8:2::2/64   |
+# |                  | |                     | |                    |
+# |              $h1 + |                     | + $h2                |
+# |                  | |                     | |                    |
+# +------------------|-+                     +-|--------------------+
+#                    |                         |
+# +------------------|-------------------------|--------------------+
+# | SW               |                         |                    |
+# |                  |                         |                    |
+# |             $rp1 +                         + $rp2               |
+# |                  |                         |                    |
+# |           $rp1.1 +                         + $rp2.1             |
+# |     192.0.2.1/24                             198.51.100.1/24    |
+# | 2001:db8:1::1/64                             2001:db8:2::1/64   |
+# |                                                                 |
+# +-----------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev vrf-h1 up
+
+	ip link set dev $h1 up
+	vlan_create $h1 1 vrf-h1 192.0.2.2/24 2001:db8:1::2/64
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	vlan_destroy $h1 1
+	ip link set dev $h1 down
+
+	ip link set dev vrf-h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev vrf-h2 up
+
+	ip link set dev $h2 up
+	vlan_create $h2 1 vrf-h2 198.51.100.2/24 2001:db8:2::2/64
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	vlan_destroy $h2 1
+	ip link set dev $h2 down
+
+	ip link set dev vrf-h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link add link $rp1 name $rp1.1 up type vlan id 1
+
+	ip address add 192.0.2.1/24 dev $rp1.1
+	ip address add 2001:db8:1::1/64 dev $rp1.1
+
+	ip link set dev $rp2 up
+	ip link add link $rp2 name $rp2.1 up type vlan id 1
+
+	ip address add 198.51.100.1/24 dev $rp2.1
+	ip address add 2001:db8:2::1/64 dev $rp2.1
+}
+
+router_destroy()
+{
+	ip address del 2001:db8:2::1/64 dev $rp2.1
+	ip address del 198.51.100.1/24 dev $rp2.1
+
+	ip link del dev $rp2.1
+	ip link set dev $rp2 down
+
+	ip address del 2001:db8:1::1/64 dev $rp1.1
+	ip address del 192.0.2.1/24 dev $rp1.1
+
+	ip link del dev $rp1.1
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1.1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_ets.sh b/tools/testing/selftests/net/forwarding/sch_ets.sh
new file mode 100755
index 0000000000..e60c8b4818
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A driver for the ETS selftest that implements testing in slowpath.
+lib_dir=.
+source sch_ets_core.sh
+
+ALL_TESTS="
+	ping_ipv4
+	priomap_mode
+	ets_test_strict
+	ets_test_mixed
+	ets_test_dwrr
+	classifier_mode
+	ets_test_strict
+	ets_test_mixed
+	ets_test_dwrr
+"
+
+switch_create()
+{
+	ets_switch_create
+
+	# Create a bottleneck so that the DWRR process can kick in.
+	tc qdisc add dev $swp2 root handle 1: tbf \
+	   rate 1Gbit burst 1Mbit latency 100ms
+	PARENT="parent 1:"
+}
+
+switch_destroy()
+{
+	ets_switch_destroy
+	tc qdisc del dev $swp2 root
+}
+
+# Callback from sch_ets_tests.sh
+collect_stats()
+{
+	local -a streams=("$@")
+	local stream
+
+	for stream in ${streams[@]}; do
+		qdisc_parent_stats_get $swp2 10:$((stream + 1)) .bytes
+	done
+}
+
+ets_run
diff --git a/tools/testing/selftests/net/forwarding/sch_ets_core.sh b/tools/testing/selftests/net/forwarding/sch_ets_core.sh
new file mode 100644
index 0000000000..f906fcc665
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets_core.sh
@@ -0,0 +1,300 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is a template for ETS Qdisc test.
+#
+# This test sends from H1 several traffic streams with 802.1p-tagged packets.
+# The tags are used at $swp1 to prioritize the traffic. Each stream is then
+# queued at a different ETS band according to the assigned priority. After
+# runnig for a while, counters at H2 are consulted to determine whether the
+# traffic scheduling was according to the ETS configuration.
+#
+# This template is supposed to be embedded by a test driver, which implements
+# statistics collection, any HW-specific stuff, and prominently configures the
+# system to assure that there is overcommitment at $swp2. That is necessary so
+# that the ETS traffic selection algorithm kicks in and has to schedule some
+# traffic at the expense of other.
+#
+# A driver for veth-based testing is in sch_ets.sh, an example of a driver for
+# an offloaded data path is in selftests/drivers/net/mlxsw/sch_ets.sh.
+#
+# +---------------------------------------------------------------------+
+# | H1                                                                  |
+# |     + $h1.10              + $h1.11              + $h1.12            |
+# |     | 192.0.2.1/28        | 192.0.2.17/28       | 192.0.2.33/28     |
+# |     | egress-qos-map      | egress-qos-map      | egress-qos-map    |
+# |     |  0:0                |  0:1                |  0:2              |
+# |     \____________________ | ____________________/                   |
+# |                          \|/                                        |
+# |                           + $h1                                     |
+# +---------------------------|-----------------------------------------+
+#                             |
+# +---------------------------|-----------------------------------------+
+# | SW                        + $swp1                                   |
+# |                           | >1Gbps                                  |
+# |      ____________________/|\____________________                    |
+# |     /                     |                     \                   |
+# |  +--|----------------+ +--|----------------+ +--|----------------+  |
+# |  |  + $swp1.10       | |  + $swp1.11       | |  + $swp1.12       |  |
+# |  |    ingress-qos-map| |    ingress-qos-map| |    ingress-qos-map|  |
+# |  |     0:0 1:1 2:2   | |     0:0 1:1 2:2   | |     0:0 1:1 2:2   |  |
+# |  |                   | |                   | |                   |  |
+# |  |    BR10           | |    BR11           | |    BR12           |  |
+# |  |                   | |                   | |                   |  |
+# |  |  + $swp2.10       | |  + $swp2.11       | |  + $swp2.12       |  |
+# |  +--|----------------+ +--|----------------+ +--|----------------+  |
+# |     \____________________ | ____________________/                   |
+# |                          \|/                                        |
+# |                           + $swp2                                   |
+# |                           | 1Gbps (ethtool or HTB qdisc)            |
+# |                           | qdisc ets quanta $W0 $W1 $W2            |
+# |                           |           priomap 0 1 2                 |
+# +---------------------------|-----------------------------------------+
+#                             |
+# +---------------------------|-----------------------------------------+
+# | H2                        + $h2                                     |
+# |      ____________________/|\____________________                    |
+# |     /                     |                     \                   |
+# |     + $h2.10              + $h2.11              + $h2.12            |
+# |       192.0.2.2/28          192.0.2.18/28         192.0.2.34/28     |
+# +---------------------------------------------------------------------+
+
+NUM_NETIFS=4
+CHECK_TC=yes
+source $lib_dir/lib.sh
+source $lib_dir/sch_ets_tests.sh
+
+PARENT=root
+QDISC_DEV=
+
+sip()
+{
+	echo 192.0.2.$((16 * $1 + 1))
+}
+
+dip()
+{
+	echo 192.0.2.$((16 * $1 + 2))
+}
+
+# Callback from sch_ets_tests.sh
+ets_start_traffic()
+{
+	local dst_mac=$(mac_get $h2)
+	local i=$1; shift
+
+	start_traffic $h1.1$i $(sip $i) $(dip $i) $dst_mac
+}
+
+ETS_CHANGE_QDISC=
+
+priomap_mode()
+{
+	echo "Running in priomap mode"
+	ets_delete_qdisc
+	ETS_CHANGE_QDISC=ets_change_qdisc_priomap
+}
+
+classifier_mode()
+{
+	echo "Running in classifier mode"
+	ets_delete_qdisc
+	ETS_CHANGE_QDISC=ets_change_qdisc_classifier
+}
+
+ets_change_qdisc_priomap()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local priomap=$1; shift
+	local quanta=("${@}")
+
+	local op=$(if [[ -n $QDISC_DEV ]]; then echo change; else echo add; fi)
+
+	tc qdisc $op dev $dev $PARENT handle 10: ets			       \
+		$(if ((nstrict)); then echo strict $nstrict; fi)	       \
+		$(if ((${#quanta[@]})); then echo quanta ${quanta[@]}; fi)     \
+		priomap $priomap
+	QDISC_DEV=$dev
+}
+
+ets_change_qdisc_classifier()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local priomap=$1; shift
+	local quanta=("${@}")
+
+	local op=$(if [[ -n $QDISC_DEV ]]; then echo change; else echo add; fi)
+
+	tc qdisc $op dev $dev $PARENT handle 10: ets			       \
+		$(if ((nstrict)); then echo strict $nstrict; fi)	       \
+		$(if ((${#quanta[@]})); then echo quanta ${quanta[@]}; fi)
+
+	if [[ $op == add ]]; then
+		local prio=0
+		local band
+
+		for band in $priomap; do
+			tc filter add dev $dev parent 10: basic \
+				match "meta(priority eq $prio)" \
+				flowid 10:$((band + 1))
+			((prio++))
+		done
+	fi
+	QDISC_DEV=$dev
+}
+
+# Callback from sch_ets_tests.sh
+ets_change_qdisc()
+{
+	if [[ -z "$ETS_CHANGE_QDISC" ]]; then
+		exit 1
+	fi
+	$ETS_CHANGE_QDISC "$@"
+}
+
+ets_delete_qdisc()
+{
+	if [[ -n $QDISC_DEV ]]; then
+		tc qdisc del dev $QDISC_DEV $PARENT
+		QDISC_DEV=
+	fi
+}
+
+h1_create()
+{
+	local i;
+
+	simple_if_init $h1
+	mtu_set $h1 9900
+	for i in {0..2}; do
+		vlan_create $h1 1$i v$h1 $(sip $i)/28
+		ip link set dev $h1.1$i type vlan egress 0:$i
+	done
+}
+
+h1_destroy()
+{
+	local i
+
+	for i in {0..2}; do
+		vlan_destroy $h1 1$i
+	done
+	mtu_restore $h1
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	local i
+
+	simple_if_init $h2
+	mtu_set $h2 9900
+	for i in {0..2}; do
+		vlan_create $h2 1$i v$h2 $(dip $i)/28
+	done
+}
+
+h2_destroy()
+{
+	local i
+
+	for i in {0..2}; do
+		vlan_destroy $h2 1$i
+	done
+	mtu_restore $h2
+	simple_if_fini $h2
+}
+
+ets_switch_create()
+{
+	local i
+
+	ip link set dev $swp1 up
+	mtu_set $swp1 9900
+
+	ip link set dev $swp2 up
+	mtu_set $swp2 9900
+
+	for i in {0..2}; do
+		vlan_create $swp1 1$i
+		ip link set dev $swp1.1$i type vlan ingress 0:0 1:1 2:2
+
+		vlan_create $swp2 1$i
+
+		ip link add dev br1$i type bridge
+		ip link set dev $swp1.1$i master br1$i
+		ip link set dev $swp2.1$i master br1$i
+
+		ip link set dev br1$i up
+		ip link set dev $swp1.1$i up
+		ip link set dev $swp2.1$i up
+	done
+}
+
+ets_switch_destroy()
+{
+	local i
+
+	ets_delete_qdisc
+
+	for i in {0..2}; do
+		ip link del dev br1$i
+		vlan_destroy $swp2 1$i
+		vlan_destroy $swp1 1$i
+	done
+
+	mtu_restore $swp2
+	ip link set dev $swp2 down
+
+	mtu_restore $swp1
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	put=$swp2
+	hut=$h2
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 $(dip 0) " vlan 10"
+	ping_test $h1.11 $(dip 1) " vlan 11"
+	ping_test $h1.12 $(dip 2) " vlan 12"
+}
+
+ets_run()
+{
+	trap cleanup EXIT
+
+	setup_prepare
+	setup_wait
+
+	tests_run
+
+	exit $EXIT_STATUS
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
new file mode 100644
index 0000000000..cdf689e994
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Global interface:
+#  $put -- port under test (e.g. $swp2)
+#  collect_stats($streams...) -- A function to get stats for individual streams
+#  ets_start_traffic($band) -- Start traffic for this band
+#  ets_change_qdisc($op, $dev, $nstrict, $quanta...) -- Add or change qdisc
+
+# WS describes the Qdisc configuration. It has one value per band (so the
+# number of array elements indicates the number of bands). If the value is
+# 0, it is a strict band, otherwise the it's a DRR band and the value is
+# that band's quantum.
+declare -a WS
+
+qdisc_describe()
+{
+	local nbands=${#WS[@]}
+	local nstrict=0
+	local i
+
+	for ((i = 0; i < nbands; i++)); do
+		if ((!${WS[$i]})); then
+			: $((nstrict++))
+		fi
+	done
+
+	echo -n "ets bands $nbands"
+	if ((nstrict)); then
+		echo -n " strict $nstrict"
+	fi
+	if ((nstrict < nbands)); then
+		echo -n " quanta"
+		for ((i = nstrict; i < nbands; i++)); do
+			echo -n " ${WS[$i]}"
+		done
+	fi
+}
+
+__strict_eval()
+{
+	local desc=$1; shift
+	local d=$1; shift
+	local total=$1; shift
+	local above=$1; shift
+
+	RET=0
+
+	if ((! total)); then
+		check_err 1 "No traffic observed"
+		log_test "$desc"
+		return
+	fi
+
+	local ratio=$(echo "scale=2; 100 * $d / $total" | bc -l)
+	if ((above)); then
+		test $(echo "$ratio > 95.0" | bc -l) -eq 1
+		check_err $? "Not enough traffic"
+		log_test "$desc"
+		log_info "Expected ratio >95% Measured ratio $ratio"
+	else
+		test $(echo "$ratio < 5" | bc -l) -eq 1
+		check_err $? "Too much traffic"
+		log_test "$desc"
+		log_info "Expected ratio <5% Measured ratio $ratio"
+	fi
+}
+
+strict_eval()
+{
+	__strict_eval "$@" 1
+}
+
+notraf_eval()
+{
+	__strict_eval "$@" 0
+}
+
+__ets_dwrr_test()
+{
+	local -a streams=("$@")
+
+	local low_stream=${streams[0]}
+	local seen_strict=0
+	local -a t0 t1 d
+	local stream
+	local total
+	local i
+
+	echo "Testing $(qdisc_describe), streams ${streams[@]}"
+
+	for stream in ${streams[@]}; do
+		ets_start_traffic $stream
+	done
+
+	sleep 10
+
+	t0=($(collect_stats "${streams[@]}"))
+
+	sleep 10
+
+	t1=($(collect_stats "${streams[@]}"))
+	d=($(for ((i = 0; i < ${#streams[@]}; i++)); do
+		 echo $((${t1[$i]} - ${t0[$i]}))
+	     done))
+	total=$(echo ${d[@]} | sed 's/ /+/g' | bc)
+
+	for ((i = 0; i < ${#streams[@]}; i++)); do
+		local stream=${streams[$i]}
+		if ((seen_strict)); then
+			notraf_eval "band $stream" ${d[$i]} $total
+		elif ((${WS[$stream]} == 0)); then
+			strict_eval "band $stream" ${d[$i]} $total
+			seen_strict=1
+		elif ((stream == low_stream)); then
+			# Low stream is used as DWRR evaluation reference.
+			continue
+		else
+			multipath_eval "bands $low_stream:$stream" \
+				       ${WS[$low_stream]} ${WS[$stream]} \
+				       ${d[0]} ${d[$i]}
+		fi
+	done
+
+	for stream in ${streams[@]}; do
+		stop_traffic
+	done
+}
+
+ets_dwrr_test_012()
+{
+	__ets_dwrr_test 0 1 2
+}
+
+ets_dwrr_test_01()
+{
+	__ets_dwrr_test 0 1
+}
+
+ets_dwrr_test_12()
+{
+	__ets_dwrr_test 1 2
+}
+
+ets_qdisc_setup()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local -a quanta=("$@")
+
+	local ndwrr=${#quanta[@]}
+	local nbands=$((nstrict + ndwrr))
+	local nstreams=$(if ((nbands > 3)); then echo 3; else echo $nbands; fi)
+	local priomap=$(seq 0 $((nstreams - 1)))
+	local i
+
+	WS=($(
+		for ((i = 0; i < nstrict; i++)); do
+			echo 0
+		done
+		for ((i = 0; i < ndwrr; i++)); do
+			echo ${quanta[$i]}
+		done
+	))
+
+	ets_change_qdisc $dev $nstrict "$priomap" ${quanta[@]}
+}
+
+ets_set_dwrr_uniform()
+{
+	ets_qdisc_setup $put 0 3300 3300 3300
+}
+
+ets_set_dwrr_varying()
+{
+	ets_qdisc_setup $put 0 5000 3500 1500
+}
+
+ets_set_strict()
+{
+	ets_qdisc_setup $put 3
+}
+
+ets_set_mixed()
+{
+	ets_qdisc_setup $put 1 5000 2500 1500
+}
+
+ets_change_quantum()
+{
+	tc class change dev $put classid 10:2 ets quantum 8000
+	WS[1]=8000
+}
+
+ets_set_dwrr_two_bands()
+{
+	ets_qdisc_setup $put 0 5000 2500
+}
+
+ets_test_strict()
+{
+	ets_set_strict
+	ets_dwrr_test_01
+	ets_dwrr_test_12
+}
+
+ets_test_mixed()
+{
+	ets_set_mixed
+	ets_dwrr_test_01
+	ets_dwrr_test_12
+}
+
+ets_test_dwrr()
+{
+	ets_set_dwrr_uniform
+	ets_dwrr_test_012
+	ets_set_dwrr_varying
+	ets_dwrr_test_012
+	ets_change_quantum
+	ets_dwrr_test_012
+	ets_set_dwrr_two_bands
+	ets_dwrr_test_01
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh
new file mode 100755
index 0000000000..81f31179ac
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_red.sh
@@ -0,0 +1,493 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends one stream of traffic from H1 through a TBF shaper, to a RED
+# within TBF shaper on $swp3. The two shapers have the same configuration, and
+# thus the resulting stream should fill all available bandwidth on the latter
+# shaper. A second stream is sent from H2 also via $swp3, and used to inject
+# additional traffic. Since all available bandwidth is taken, this traffic has
+# to go to backlog.
+#
+# +--------------------------+                     +--------------------------+
+# | H1                       |                     | H2                       |
+# |     + $h1                |                     |     + $h2                |
+# |     | 192.0.2.1/28       |                     |     | 192.0.2.2/28       |
+# |     | TBF 10Mbps         |                     |     |                    |
+# +-----|--------------------+                     +-----|--------------------+
+#       |                                                |
+# +-----|------------------------------------------------|--------------------+
+# | SW  |                                                |                    |
+# |  +--|------------------------------------------------|----------------+   |
+# |  |  + $swp1                                          + $swp2          |   |
+# |  |                               BR                                   |   |
+# |  |                                                                    |   |
+# |  |                                + $swp3                             |   |
+# |  |                                | TBF 10Mbps / RED                  |   |
+# |  +--------------------------------|-----------------------------------+   |
+# |                                   |                                       |
+# +-----------------------------------|---------------------------------------+
+#                                     |
+#                               +-----|--------------------+
+#			        | H3  |                    |
+#			        |     + $h1                |
+#			        |       192.0.2.3/28       |
+#			        |                          |
+#			        +--------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ecn_test
+	ecn_nodrop_test
+	red_test
+	red_qevent_test
+	ecn_qevent_test
+"
+
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+BACKLOG=30000
+PKTSZ=1400
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+	mtu_set $h1 10000
+	tc qdisc replace dev $h1 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 root
+	mtu_restore $h1
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	mtu_set $h2 10000
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/28
+	mtu_set $h3 10000
+}
+
+h3_destroy()
+{
+	mtu_restore $h3
+	simple_if_fini $h3 192.0.2.3/28
+}
+
+switch_create()
+{
+	ip link add dev br up type bridge
+	ip link set dev $swp1 up master br
+	ip link set dev $swp2 up master br
+	ip link set dev $swp3 up master br
+
+	mtu_set $swp1 10000
+	mtu_set $swp2 10000
+	mtu_set $swp3 10000
+
+	tc qdisc replace dev $swp3 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+	ip link add name _drop_test up type dummy
+}
+
+switch_destroy()
+{
+	ip link del dev _drop_test
+	tc qdisc del dev $swp3 root
+
+	mtu_restore $h3
+	mtu_restore $h2
+	mtu_restore $h1
+
+	ip link set dev $swp3 down nomaster
+	ip link set dev $swp2 down nomaster
+	ip link set dev $swp1 down nomaster
+	ip link del dev br
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	h2=${NETIFS[p3]}
+	swp2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	h3_mac=$(mac_get $h3)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.3 " from host 1"
+	ping_test $h2 192.0.2.3 " from host 2"
+}
+
+get_qdisc_backlog()
+{
+	qdisc_stats_get $swp3 11: .backlog
+}
+
+get_nmarked()
+{
+	qdisc_stats_get $swp3 11: .marked
+}
+
+get_qdisc_npackets()
+{
+	qdisc_stats_get $swp3 11: .packets
+}
+
+get_nmirrored()
+{
+	link_stats_get _drop_test tx packets
+}
+
+send_packets()
+{
+	local proto=$1; shift
+	local pkts=$1; shift
+
+	$MZ $h2 -p $PKTSZ -a own -b $h3_mac -A 192.0.2.2 -B 192.0.2.3 -t $proto -q -c $pkts "$@"
+}
+
+# This sends traffic in an attempt to build a backlog of $size. Returns 0 on
+# success. After 10 failed attempts it bails out and returns 1. It dumps the
+# backlog size to stdout.
+build_backlog()
+{
+	local size=$1; shift
+	local proto=$1; shift
+
+	local i=0
+
+	while :; do
+		local cur=$(get_qdisc_backlog)
+		local diff=$((size - cur))
+		local pkts=$(((diff + PKTSZ - 1) / PKTSZ))
+
+		if ((cur >= size)); then
+			echo $cur
+			return 0
+		elif ((i++ > 10)); then
+			echo $cur
+			return 1
+		fi
+
+		send_packets $proto $pkts "$@"
+		sleep 1
+	done
+}
+
+check_marking()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmarked_0=$(get_nmarked)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmarked_1=$(get_nmarked)
+
+	local nmarked_d=$((nmarked_1 - nmarked_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmarked_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+check_mirroring()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmirrored_0=$(get_nmirrored)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmirrored_1=$(get_nmirrored)
+
+	local nmirrored_d=$((nmirrored_1 - nmirrored_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmirrored_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+ecn_test_common()
+{
+	local name=$1; shift
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Build the below-the-limit backlog using UDP. We could use TCP just
+	# fine, but this way we get a proof that UDP is accepted when queue
+	# length is below the limit. The main stream is using TCP, and if the
+	# limit is misconfigured, we would see this traffic being ECN marked.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) udp)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "$name backlog < limit"
+
+	# Now push TCP, because non-TCP traffic would be early-dropped after the
+	# backlog crosses the limit, and we want to make sure that the backlog
+	# is above the limit.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected >= 95."
+	log_test "$name backlog > limit"
+}
+
+do_ecn_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, it should all get dropped, and backlog
+	# building should fail.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_fail $? "UDP traffic went into backlog instead of being early-dropped"
+	log_test "$name backlog > limit: UDP early-dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_nodrop_test()
+{
+	local limit=$1; shift
+	local name="ECN nodrop"
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, in nodrop mode, make sure it goes to
+	# backlog as well.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_err $? "UDP traffic was early-dropped instead of getting into backlog"
+	log_test "$name backlog > limit: UDP not dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_test()
+{
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Use ECN-capable TCP to verify there's no marking even though the queue
+	# is above limit.
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+
+	# Pushing below the queue limit should work.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog < limit"
+
+	# Pushing above should not.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_fail $? "Traffic went into backlog instead of being early-dropped"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog > limit"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_qevent_test()
+{
+	local limit=$1; shift
+	local backlog
+	local base
+	local now
+	local pct
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t udp -q &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	# Push to the queue until it's at the limit. The configured limit is
+	# rounded by the qdisc, so this is the best we can do to get to the real
+	# limit.
+	build_backlog $((3 * limit / 2)) udp >/dev/null
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now >= base + 100))
+	check_err $? "Dropped packets not observed: 100 expected, $((now - base)) seen"
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now == base))
+	check_err $? "Dropped packets still observed: 0 expected, $((now - base)) seen"
+
+	log_test "RED early_dropped packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_qevent_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected == 0."
+
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected >= 95."
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	log_test "ECN marked packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+install_qdisc()
+{
+	local -a args=("$@")
+
+	tc qdisc replace dev $swp3 parent 1:1 handle 11: red \
+	   limit 1M avpkt $PKTSZ probability 1 \
+	   min $BACKLOG max $((BACKLOG + 1)) burst 38 "${args[@]}"
+	sleep 1
+}
+
+uninstall_qdisc()
+{
+	tc qdisc del dev $swp3 parent 1:1
+}
+
+ecn_test()
+{
+	install_qdisc ecn
+	do_ecn_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_nodrop_test()
+{
+	install_qdisc ecn nodrop
+	do_ecn_nodrop_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_test()
+{
+	install_qdisc
+	do_red_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_qevent_test()
+{
+	install_qdisc qevent early_drop block 10
+	do_red_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_qevent_test()
+{
+	install_qdisc ecn qevent mark block 10
+	do_ecn_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
new file mode 100644
index 0000000000..d1f26cb7cd
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends a stream of traffic from H1 through a switch, to H2. On the
+# egress port from the switch ($swp2), a shaper is installed. The test verifies
+# that the rates on the port match the configured shaper.
+#
+# In order to test per-class shaping, $swp2 actually contains TBF under PRIO or
+# ETS, with two different configurations. Traffic is prioritized using 802.1p.
+#
+# +-------------------------------------------+
+# | H1                                        |
+# |     + $h1.10                  $h1.11 +    |
+# |     | 192.0.2.1/28     192.0.2.17/28 |    |
+# |     |                                |    |
+# |     \______________    _____________/     |
+# |                    \ /                    |
+# |                     + $h1                 |
+# +---------------------|---------------------+
+#                       |
+# +---------------------|---------------------+
+# | SW                  + $swp1               |
+# |     _______________/ \_______________     |
+# |    /                                 \    |
+# |  +-|--------------+   +--------------|-+  |
+# |  | + $swp1.10     |   |     $swp1.11 + |  |
+# |  |                |   |                |  |
+# |  |     BR10       |   |       BR11     |  |
+# |  |                |   |                |  |
+# |  | + $swp2.10     |   |     $swp2.11 + |  |
+# |  +-|--------------+   +--------------|-+  |
+# |    \_______________   ______________/     |
+# |                    \ /                    |
+# |                     + $swp2               |
+# +---------------------|---------------------+
+#                       |
+# +---------------------|---------------------+
+# | H2                  + $h2                 |
+# |      ______________/ \______________      |
+# |     /                               \     |
+# |     |                               |     |
+# |     + $h2.10                 $h2.11 +     |
+# |       192.0.2.2/28    192.0.2.18/28       |
+# +-------------------------------------------+
+
+NUM_NETIFS=4
+CHECK_TC="yes"
+source $lib_dir/lib.sh
+
+ipaddr()
+{
+	local host=$1; shift
+	local vlan=$1; shift
+
+	echo 192.0.2.$((16 * (vlan - 10) + host))
+}
+
+host_create()
+{
+	local dev=$1; shift
+	local host=$1; shift
+
+	simple_if_init $dev
+	mtu_set $dev 10000
+
+	vlan_create $dev 10 v$dev $(ipaddr $host 10)/28
+	ip link set dev $dev.10 type vlan egress 0:0
+
+	vlan_create $dev 11 v$dev $(ipaddr $host 11)/28
+	ip link set dev $dev.11 type vlan egress 0:1
+}
+
+host_destroy()
+{
+	local dev=$1; shift
+
+	vlan_destroy $dev 11
+	vlan_destroy $dev 10
+	mtu_restore $dev
+	simple_if_fini $dev
+}
+
+h1_create()
+{
+	host_create $h1 1
+}
+
+h1_destroy()
+{
+	host_destroy $h1
+}
+
+h2_create()
+{
+	host_create $h2 2
+
+	tc qdisc add dev $h2 clsact
+	tc filter add dev $h2 ingress pref 1010 prot 802.1q \
+	   flower $TCFLAGS vlan_id 10 action pass
+	tc filter add dev $h2 ingress pref 1011 prot 802.1q \
+	   flower $TCFLAGS vlan_id 11 action pass
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	host_destroy $h2
+}
+
+switch_create()
+{
+	local intf
+	local vlan
+
+	ip link add dev br10 type bridge
+	ip link add dev br11 type bridge
+
+	for intf in $swp1 $swp2; do
+		ip link set dev $intf up
+		mtu_set $intf 10000
+
+		for vlan in 10 11; do
+			vlan_create $intf $vlan
+			ip link set dev $intf.$vlan master br$vlan
+			ip link set dev $intf.$vlan up
+		done
+	done
+
+	for vlan in 10 11; do
+		ip link set dev $swp1.$vlan type vlan ingress 0:0 1:1
+	done
+
+	ip link set dev br10 up
+	ip link set dev br11 up
+}
+
+switch_destroy()
+{
+	local intf
+	local vlan
+
+	# A test may have been interrupted mid-run, with Qdisc installed. Delete
+	# it here.
+	tc qdisc del dev $swp2 root 2>/dev/null
+
+	ip link set dev br11 down
+	ip link set dev br10 down
+
+	for intf in $swp2 $swp1; do
+		for vlan in 11 10; do
+			ip link set dev $intf.$vlan down
+			ip link set dev $intf.$vlan nomaster
+			vlan_destroy $intf $vlan
+		done
+
+		mtu_restore $intf
+		ip link set dev $intf down
+	done
+
+	ip link del dev br11
+	ip link del dev br10
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	swp4=${NETIFS[p7]}
+	swp5=${NETIFS[p8]}
+
+	h2_mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 $(ipaddr 2 10) " vlan 10"
+	ping_test $h1.11 $(ipaddr 2 11) " vlan 11"
+}
+
+tbf_get_counter()
+{
+	local vlan=$1; shift
+
+	tc_rule_stats_get $h2 10$vlan ingress .bytes
+}
+
+do_tbf_test()
+{
+	local vlan=$1; shift
+	local mbit=$1; shift
+
+	start_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 2 $vlan) $h2_mac
+	sleep 5 # Wait for the burst to dwindle
+
+	local t2=$(busywait_for_counter 1000 +1 tbf_get_counter $vlan)
+	sleep 10
+	local t3=$(tbf_get_counter $vlan)
+	stop_traffic
+
+	RET=0
+
+	# Note: TBF uses 10^6 Mbits, not 2^20 ones.
+	local er=$((mbit * 1000 * 1000))
+	local nr=$(rate $t2 $t3 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-5 <= nr_pct && nr_pct <= 5))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%."
+
+	log_test "TC $((vlan - 10)): TBF rate ${mbit}Mbit"
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh b/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh
new file mode 100755
index 0000000000..84fb6cab88
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+QDISC="ets strict"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_etsprio.sh
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh
new file mode 100644
index 0000000000..df9bcd6a81
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	tbf_test
+	tbf_root_test
+"
+source $lib_dir/sch_tbf_core.sh
+
+QDISC_TYPE=${QDISC% *}
+
+tbf_test_one()
+{
+	local bs=$1; shift
+
+	tc qdisc replace dev $swp2 parent 10:3 handle 103: tbf \
+	   rate 400Mbit burst $bs limit 1M
+	tc qdisc replace dev $swp2 parent 10:2 handle 102: tbf \
+	   rate 800Mbit burst $bs limit 1M
+
+	do_tbf_test 10 400 $bs
+	do_tbf_test 11 800 $bs
+}
+
+tbf_test()
+{
+	log_info "Testing root-$QDISC_TYPE-tbf"
+
+	# This test is used for both ETS and PRIO. Even though we only need two
+	# bands, PRIO demands a minimum of three.
+	tc qdisc add dev $swp2 root handle 10: $QDISC 3 priomap 2 1 0
+	tbf_test_one 128K
+	tc qdisc del dev $swp2 root
+}
+
+tbf_root_test()
+{
+	local bs=128K
+
+	log_info "Testing root-tbf-$QDISC_TYPE"
+
+	tc qdisc replace dev $swp2 root handle 1: \
+		tbf rate 400Mbit burst $bs limit 1M
+	tc qdisc replace dev $swp2 parent 1:1 handle 10: \
+		$QDISC 3 priomap 2 1 0
+	tc qdisc replace dev $swp2 parent 10:3 handle 103: \
+		bfifo limit 1M
+	tc qdisc replace dev $swp2 parent 10:2 handle 102: \
+		bfifo limit 1M
+	tc qdisc replace dev $swp2 parent 10:1 handle 101: \
+		bfifo limit 1M
+
+	do_tbf_test 10 400 $bs
+	do_tbf_test 11 400 $bs
+
+	tc qdisc del dev $swp2 root
+}
+
+if type -t sch_tbf_pre_hook >/dev/null; then
+	sch_tbf_pre_hook
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh b/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh
new file mode 100755
index 0000000000..9c8cb1cb9b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+QDISC="prio bands"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_etsprio.sh
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_root.sh b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh
new file mode 100755
index 0000000000..96c997be0d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	tbf_test
+"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_core.sh
+
+tbf_test_one()
+{
+	local bs=$1; shift
+
+	tc qdisc replace dev $swp2 root handle 108: tbf \
+	   rate 400Mbit burst $bs limit 1M
+	do_tbf_test 10 400 $bs
+}
+
+tbf_test()
+{
+	tbf_test_one 128K
+	tc qdisc del dev $swp2 root
+}
+
+if type -t sch_tbf_pre_hook >/dev/null; then
+	sch_tbf_pre_hook
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/settings b/tools/testing/selftests/net/forwarding/settings
new file mode 100644
index 0000000000..e7b9417537
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/net/forwarding/skbedit_priority.sh b/tools/testing/selftests/net/forwarding/skbedit_priority.sh
new file mode 100755
index 0000000000..3dd5fcbd3e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/skbedit_priority.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
+# egress of $swp2, the traffic is acted upon by an action skbedit priority. The
+# new priority should be taken into account when classifying traffic on the PRIO
+# qdisc at $swp2. The test verifies that for different priority values, the
+# traffic ends up in expected PRIO band.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  |                                                             PRIO   |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_ingress
+	test_egress
+"
+
+NUM_NETIFS=4
+source lib.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 addrgenmode none
+	ip link set dev br1 up
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+	tc qdisc add dev $swp2 root handle 10: \
+	   prio bands 8 priomap 7 6 5 4 3 2 1 0
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 root
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+test_skbedit_priority_one()
+{
+	local locus=$1; shift
+	local prio=$1; shift
+	local classid=$1; shift
+
+	RET=0
+
+	tc filter add $locus handle 101 pref 1 \
+	   flower action skbedit priority $prio
+
+	local pkt0=$(qdisc_parent_stats_get $swp2 $classid .packets)
+	local pkt2=$(tc_rule_handle_stats_get "$locus" 101)
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -A 192.0.2.1 -B 192.0.2.2 -q
+
+	local pkt1
+	pkt1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((pkt0 + 10))" \
+			qdisc_parent_stats_get $swp2 $classid .packets)
+	check_err $? "Expected to get 10 packets on class $classid, but got $((pkt1 - pkt0))."
+
+	local pkt3=$(tc_rule_handle_stats_get "$locus" 101)
+	((pkt3 >= pkt2 + 10))
+	check_err $? "Expected to get 10 packets on skbedit rule but got $((pkt3 - pkt2))."
+
+	log_test "$locus skbedit priority $prio -> classid $classid"
+
+	tc filter del $locus pref 1
+}
+
+test_ingress()
+{
+	local prio
+
+	for prio in {0..7}; do
+		test_skbedit_priority_one "dev $swp1 ingress" \
+					  $prio 10:$((8 - prio))
+	done
+}
+
+test_egress()
+{
+	local prio
+
+	for prio in {0..7}; do
+		test_skbedit_priority_one "dev $swp2 egress" \
+					  $prio 10:$((8 - prio))
+	done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
new file mode 100755
index 0000000000..b0f5e55d2d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -0,0 +1,321 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="gact_drop_and_ok_test mirred_egress_redirect_test \
+	mirred_egress_mirror_test matchall_mirred_egress_mirror_test \
+	gact_trap_test mirred_egress_to_ingress_test \
+	mirred_egress_to_ingress_tcp_test"
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+require_command ncat
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 clsact
+
+	simple_if_init $swp2 192.0.2.1/24
+}
+
+switch_destroy()
+{
+	simple_if_fini $swp2 192.0.2.1/24
+
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+mirred_egress_test()
+{
+	local action=$1
+	local protocol=$2
+	local classifier=$3
+	local classifier_args=$4
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched without redirect rule inserted"
+
+	tc filter add dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier $tcflags $classifier_args \
+		action mirred egress $action dev $swp2
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match incoming $action packet"
+
+	tc filter del dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "mirred egress $classifier $action ($tcflags)"
+}
+
+gact_drop_and_ok_test()
+{
+	RET=0
+
+	tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "Packet was not dropped"
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action ok
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_err $? "Did not see passed packet"
+
+	tc_check_packets "dev $swp1 ingress" 102 2
+	check_fail $? "Packet was dropped and it should not reach here"
+
+	tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "gact drop and ok ($tcflags)"
+}
+
+gact_trap_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_hw dst_ip 192.0.2.2 action drop
+	tc filter add dev $swp1 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action mirred egress redirect \
+		dev $swp2
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_fail $? "Saw packet without trap rule inserted"
+
+	tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action trap
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "Packet was not trapped"
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_err $? "Did not see trapped packet"
+
+	tc filter del dev $swp1 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "trap ($tcflags)"
+}
+
+mirred_egress_to_ingress_test()
+{
+	RET=0
+
+	tc filter add dev $h1 protocol ip pref 100 handle 100 egress flower \
+		ip_proto icmp src_ip 192.0.2.1 dst_ip 192.0.2.2 type 8 action \
+			ct commit nat src addr 192.0.2.2 pipe \
+			ct clear pipe \
+			ct commit nat dst addr 192.0.2.1 pipe \
+			mirred ingress redirect dev $h1
+
+	tc filter add dev $swp1 protocol ip pref 11 handle 111 ingress flower \
+		ip_proto icmp src_ip 192.0.2.1 dst_ip 192.0.2.2 type 8 action drop
+	tc filter add dev $swp1 protocol ip pref 12 handle 112 ingress flower \
+		ip_proto icmp src_ip 192.0.2.1 dst_ip 192.0.2.2 type 0 action pass
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t icmp "ping,id=42,seq=10" -q
+
+	tc_check_packets "dev $h1 egress" 100 1
+	check_err $? "didn't mirror first packet"
+
+	tc_check_packets "dev $swp1 ingress" 111 1
+	check_fail $? "didn't redirect first packet"
+	tc_check_packets "dev $swp1 ingress" 112 1
+	check_err $? "didn't receive reply to first packet"
+
+	ping 192.0.2.2 -I$h1 -c1 -w1 -q 1>/dev/null 2>&1
+
+	tc_check_packets "dev $h1 egress" 100 2
+	check_err $? "didn't mirror second packet"
+	tc_check_packets "dev $swp1 ingress" 111 1
+	check_fail $? "didn't redirect second packet"
+	tc_check_packets "dev $swp1 ingress" 112 2
+	check_err $? "didn't receive reply to second packet"
+
+	tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
+	tc filter del dev $swp1 ingress protocol ip pref 11 handle 111 flower
+	tc filter del dev $swp1 ingress protocol ip pref 12 handle 112 flower
+
+	log_test "mirred_egress_to_ingress ($tcflags)"
+}
+
+mirred_egress_to_ingress_tcp_test()
+{
+	mirred_e2i_tf1=$(mktemp) mirred_e2i_tf2=$(mktemp)
+
+	RET=0
+	dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred_e2i_tf1
+	tc filter add dev $h1 protocol ip pref 100 handle 100 egress flower \
+		$tcflags ip_proto tcp src_ip 192.0.2.1 dst_ip 192.0.2.2 \
+			action ct commit nat src addr 192.0.2.2 pipe \
+			action ct clear pipe \
+			action ct commit nat dst addr 192.0.2.1 pipe \
+			action ct clear pipe \
+			action skbedit ptype host pipe \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 101 handle 101 egress flower \
+		$tcflags ip_proto icmp \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 102 handle 102 ingress flower \
+		ip_proto icmp \
+			action drop
+
+	ip vrf exec v$h1 ncat --recv-only -w10 -l -p 12345 -o $mirred_e2i_tf2 &
+	local rpid=$!
+	ip vrf exec v$h1 ncat -w1 --send-only 192.0.2.2 12345 <$mirred_e2i_tf1
+	wait -n $rpid
+	cmp -s $mirred_e2i_tf1 $mirred_e2i_tf2
+	check_err $? "server output check failed"
+
+	$MZ $h1 -c 10 -p 64 -a $h1mac -b $h1mac -A 192.0.2.1 -B 192.0.2.1 \
+		-t icmp "ping,id=42,seq=5" -q
+	tc_check_packets "dev $h1 egress" 101 10
+	check_err $? "didn't mirred redirect ICMP"
+	tc_check_packets "dev $h1 ingress" 102 10
+	check_err $? "didn't drop mirred ICMP"
+	local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits)
+	test ${overlimits} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits}"
+
+	tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
+	tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
+	tc filter del dev $h1 ingress protocol ip pref 102 handle 102 flower
+
+	rm -f $mirred_e2i_tf1 $mirred_e2i_tf2
+	log_test "mirred_egress_to_ingress_tcp ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swp1origmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp1 address $h2mac
+	ip link set $swp2 address $h1mac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	local tf
+
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+	ip link set $swp1 address $swp1origmac
+
+	for tf in $mirred_e2i_tf1 $mirred_e2i_tf2; do rm -f $tf; done
+}
+
+mirred_egress_redirect_test()
+{
+	mirred_egress_test "redirect" "ip" "flower" "dst_ip 192.0.2.2"
+}
+
+mirred_egress_mirror_test()
+{
+	mirred_egress_test "mirror" "ip" "flower" "dst_ip 192.0.2.2"
+}
+
+matchall_mirred_egress_mirror_test()
+{
+	mirred_egress_test "mirror" "all" "matchall" ""
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_chains.sh b/tools/testing/selftests/net/forwarding/tc_chains.sh
new file mode 100755
index 0000000000..b95de0463e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_chains.sh
@@ -0,0 +1,205 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="unreachable_chain_test gact_goto_chain_test create_destroy_chain \
+	   template_filter_fits"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+unreachable_chain_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower $tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 1101 1
+	check_fail $? "matched on filter in unreachable chain"
+
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower
+
+	log_test "unreachable chain ($tcflags)"
+}
+
+gact_goto_chain_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower $tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_mac $h2mac action goto chain 1
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter with goto chain action"
+
+	tc_check_packets "dev $h2 ingress" 1101 1
+	check_err $? "Did not match on correct filter in chain 1"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower
+
+	log_test "gact goto chain ($tcflags)"
+}
+
+create_destroy_chain()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress
+	check_err $? "Failed to create default chain"
+
+	output="$(tc -j chain get dev $h2 ingress)"
+	check_err $? "Failed to get default chain"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Unexpected output for default chain"
+
+	tc chain add dev $h2 ingress chain 1
+	check_err $? "Failed to create chain 1"
+
+	output="$(tc -j chain get dev $h2 ingress chain 1)"
+	check_err $? "Failed to get chain 1"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Unexpected output for chain 1"
+
+	output="$(tc -j chain show dev $h2 ingress)"
+	check_err $? "Failed to dump chains"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Can't find default chain in dump"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Can't find chain 1 in dump"
+
+	tc chain del dev $h2 ingress
+	check_err $? "Failed to destroy default chain"
+
+	tc chain del dev $h2 ingress chain 1
+	check_err $? "Failed to destroy chain 1"
+
+	log_test "create destroy chain"
+}
+
+template_filter_fits()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress protocol ip \
+		flower dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+	tc chain add dev $h2 ingress chain 1 protocol ip \
+		flower src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower dst_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower src_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeeded to insert filter which does not template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower src_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower dst_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeeded to insert filter which does not template"
+
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc chain del dev $h2 ingress chain 1
+	tc chain del dev $h2 ingress
+
+	log_test "template filter fits"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+check_tc_chain_support
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh
new file mode 100644
index 0000000000..bce8bb8d2b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_common.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+CHECK_TC="yes"
+
+# Can be overridden by the configuration file. See lib.sh
+TC_HIT_TIMEOUT=${TC_HIT_TIMEOUT:=1000} # ms
+
+tc_check_packets()
+{
+	local id=$1
+	local handle=$2
+	local count=$3
+
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "== $count" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
+}
+
+tc_check_at_least_x_packets()
+{
+	local id=$1
+	local handle=$2
+	local count=$3
+
+	busywait "$TC_HIT_TIMEOUT" until_counter_is ">= $count" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
+}
+
+tc_check_packets_hitting()
+{
+	local id=$1
+	local handle=$2
+
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "> 0" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
+}
diff --git a/tools/testing/selftests/net/forwarding/tc_flower.sh b/tools/testing/selftests/net/forwarding/tc_flower.sh
new file mode 100755
index 0000000000..b1daad19b0
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower.sh
@@ -0,0 +1,717 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="match_dst_mac_test match_src_mac_test match_dst_ip_test \
+	match_src_ip_test match_ip_flags_test match_pcp_test match_vlan_test \
+	match_ip_tos_test match_indev_test match_ip_ttl_test
+	match_mpls_label_test \
+	match_mpls_tc_test match_mpls_bos_test match_mpls_ttl_test \
+	match_mpls_lse_test"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+match_dst_mac_test()
+{
+	local dummy_mac=de:ad:be:ef:aa:aa
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_mac $dummy_mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_fail $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "dst_mac match ($tcflags)"
+}
+
+match_src_mac_test()
+{
+	local dummy_mac=de:ad:be:ef:aa:aa
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags src_mac $dummy_mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags src_mac $h1mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_fail $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "src_mac match ($tcflags)"
+}
+
+match_dst_ip_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on correct filter with mask"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "dst_ip match ($tcflags)"
+}
+
+match_src_ip_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags src_ip 198.51.100.1 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags src_ip 192.0.2.1 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags src_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on correct filter with mask"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "src_ip match ($tcflags)"
+}
+
+match_ip_flags_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags ip_flags frag action continue
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags ip_flags firstfrag action continue
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags ip_flags nofirstfrag action continue
+	tc filter add dev $h2 ingress protocol ip pref 4 handle 104 flower \
+		$tcflags ip_flags nofrag action drop
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=0" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on wrong frag filter (nofrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on wrong firstfrag filter (nofrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on nofirstfrag filter (nofrag) "
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Did not match on nofrag filter (nofrag)"
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=0,mf" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on frag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match fistfrag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Matched on wrong nofirstfrag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Match on wrong nofrag filter (1stfrag)"
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=256,mf" -q
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=256" -q
+
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "Did not match on frag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Matched on wrong firstfrag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 3
+	check_err $? "Did not match on nofirstfrag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Matched on nofrag filter (no1stfrag)"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 4 handle 104 flower
+
+	log_test "ip_flags match ($tcflags)"
+}
+
+match_pcp_test()
+{
+	RET=0
+
+	vlan_create $h2 85 v$h2 192.0.2.11/24
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
+		flower vlan_prio 6 $tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
+		flower vlan_prio 7 $tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 7:85 -t ip -q
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 0
+	check_err $? "Matched on specified PCP when should not"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on specified PCP"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower
+
+	vlan_destroy $h2 85
+
+	log_test "PCP match ($tcflags)"
+}
+
+match_vlan_test()
+{
+	RET=0
+
+	vlan_create $h2 85 v$h2 192.0.2.11/24
+	vlan_create $h2 75 v$h2 192.0.2.10/24
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
+		flower vlan_id 75 $tcflags action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
+		flower vlan_id 85 $tcflags action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 0
+	check_err $? "Matched on specified VLAN when should not"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on specified VLAN"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower
+
+	vlan_destroy $h2 75
+	vlan_destroy $h2 85
+
+	log_test "VLAN match ($tcflags)"
+}
+
+match_ip_tos_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 ip_tos 0x20 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 ip_tos 0x18 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip tos=18 -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (0x18)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (0x18)"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip tos=20 -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0x20)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0x20)"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "ip_tos match ($tcflags)"
+}
+
+match_ip_ttl_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=63" -q
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=63,mf,frag=256" -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on the wrong filter (no check on ttl)"
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Did not match on correct filter (ttl=63)"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=255" -q
+
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_fail $? "Matched on a wrong filter (ttl=63)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (no check on ttl)"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "ip_ttl match ($tcflags)"
+}
+
+match_indev_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags indev $h1 dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags indev $h2 dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "indev match ($tcflags)"
+}
+
+# Unfortunately, mausezahn can't build MPLS headers when used in L2
+# mode, so we have this function to build Label Stack Entries.
+mpls_lse()
+{
+	local label=$1
+	local tc=$2
+	local bos=$3
+	local ttl=$4
+
+	printf "%02x %02x %02x %02x"                        \
+		$((label >> 12))                            \
+		$((label >> 4 & 0xff))                      \
+		$((((label & 0xf) << 4) + (tc << 1) + bos)) \
+		$ttl
+}
+
+match_mpls_label_test()
+{
+	local ethtype="88 47"; readonly ethtype
+	local pkt
+
+	RET=0
+
+	check_tc_mpls_support $h2 || return 0
+
+	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
+		flower $tcflags mpls_label 0 action drop
+	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
+		flower $tcflags mpls_label 1048575 action drop
+
+	pkt="$ethtype $(mpls_lse 1048575 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (1048575)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (1048575)"
+
+	pkt="$ethtype $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0)"
+
+	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower
+
+	log_test "mpls_label match ($tcflags)"
+}
+
+match_mpls_tc_test()
+{
+	local ethtype="88 47"; readonly ethtype
+	local pkt
+
+	RET=0
+
+	check_tc_mpls_support $h2 || return 0
+
+	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
+		flower $tcflags mpls_tc 0 action drop
+	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
+		flower $tcflags mpls_tc 7 action drop
+
+	pkt="$ethtype $(mpls_lse 0 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (7)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (7)"
+
+	pkt="$ethtype $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0)"
+
+	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower
+
+	log_test "mpls_tc match ($tcflags)"
+}
+
+match_mpls_bos_test()
+{
+	local ethtype="88 47"; readonly ethtype
+	local pkt
+
+	RET=0
+
+	check_tc_mpls_support $h2 || return 0
+
+	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
+		flower $tcflags mpls_bos 0 action drop
+	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
+		flower $tcflags mpls_bos 1 action drop
+
+	pkt="$ethtype $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (1)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (1)"
+
+	# Need to add a second label to properly mark the Bottom of Stack
+	pkt="$ethtype $(mpls_lse 0 0 0 255) $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0)"
+
+	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower
+
+	log_test "mpls_bos match ($tcflags)"
+}
+
+match_mpls_ttl_test()
+{
+	local ethtype="88 47"; readonly ethtype
+	local pkt
+
+	RET=0
+
+	check_tc_mpls_support $h2 || return 0
+
+	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
+		flower $tcflags mpls_ttl 0 action drop
+	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
+		flower $tcflags mpls_ttl 255 action drop
+
+	pkt="$ethtype $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (255)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (255)"
+
+	pkt="$ethtype $(mpls_lse 0 0 1 0)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0)"
+
+	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower
+
+	log_test "mpls_ttl match ($tcflags)"
+}
+
+match_mpls_lse_test()
+{
+	local ethtype="88 47"; readonly ethtype
+	local pkt
+
+	RET=0
+
+	check_tc_mpls_lse_stats $h2 || return 0
+
+	# Match on first LSE (minimal values for each field)
+	tc filter add dev $h2 ingress protocol mpls_uc pref 1 handle 101 \
+		flower $tcflags mpls lse depth 1 label 0 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 2 handle 102 \
+		flower $tcflags mpls lse depth 1 tc 0 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 3 handle 103 \
+		flower $tcflags mpls lse depth 1 bos 0 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 4 handle 104 \
+		flower $tcflags mpls lse depth 1 ttl 0 action continue
+
+	# Match on second LSE (maximal values for each field)
+	tc filter add dev $h2 ingress protocol mpls_uc pref 5 handle 105 \
+		flower $tcflags mpls lse depth 2 label 1048575 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 6 handle 106 \
+		flower $tcflags mpls lse depth 2 tc 7 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 7 handle 107 \
+		flower $tcflags mpls lse depth 2 bos 1 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 8 handle 108 \
+		flower $tcflags mpls lse depth 2 ttl 255 action continue
+
+	# Match on LSE depth
+	tc filter add dev $h2 ingress protocol mpls_uc pref 9 handle 109 \
+		flower $tcflags mpls lse depth 1 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 10 handle 110 \
+		flower $tcflags mpls lse depth 2 action continue
+	tc filter add dev $h2 ingress protocol mpls_uc pref 11 handle 111 \
+		flower $tcflags mpls lse depth 3 action continue
+
+	# Base packet, matched by all filters (except for stack depth 3)
+	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Make a variant of the above packet, with a non-matching value
+	# for each LSE field
+
+	# Wrong label at depth 1
+	pkt="$ethtype $(mpls_lse 1 0 0 0) $(mpls_lse 1048575 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong TC at depth 1
+	pkt="$ethtype $(mpls_lse 0 1 0 0) $(mpls_lse 1048575 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong BOS at depth 1 (not adding a second LSE here since BOS is set
+	# in the first label, so anything that'd follow wouldn't be considered)
+	pkt="$ethtype $(mpls_lse 0 0 1 0)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong TTL at depth 1
+	pkt="$ethtype $(mpls_lse 0 0 0 1) $(mpls_lse 1048575 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong label at depth 2
+	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048574 7 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong TC at depth 2
+	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 6 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong BOS at depth 2 (adding a third LSE here since BOS isn't set in
+	# the second label)
+	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 0 255)"
+	pkt="$pkt $(mpls_lse 0 0 1 255)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Wrong TTL at depth 2
+	pkt="$ethtype $(mpls_lse 0 0 0 0) $(mpls_lse 1048575 7 1 254)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	# Filters working at depth 1 should match all packets but one
+
+	tc_check_packets "dev $h2 ingress" 101 8
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 102 8
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 103 8
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 104 8
+	check_err $? "Did not match on correct filter"
+
+	# Filters working at depth 2 should match all packets but two (because
+	# of the test packet where the label stack depth is just one)
+
+	tc_check_packets "dev $h2 ingress" 105 7
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 106 7
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 107 7
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 108 7
+	check_err $? "Did not match on correct filter"
+
+	# Finally, verify the filters that only match on LSE depth
+
+	tc_check_packets "dev $h2 ingress" 109 9
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 110 8
+	check_err $? "Did not match on correct filter"
+
+	tc_check_packets "dev $h2 ingress" 111 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol mpls_uc pref 11 handle 111 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 10 handle 110 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 9 handle 109 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 8 handle 108 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 7 handle 107 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 6 handle 106 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 5 handle 105 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 4 handle 104 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol mpls_uc pref 1 handle 101 flower
+
+	log_test "mpls lse match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_cfm.sh b/tools/testing/selftests/net/forwarding/tc_flower_cfm.sh
new file mode 100755
index 0000000000..3ca20df952
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower_cfm.sh
@@ -0,0 +1,206 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="match_cfm_opcode match_cfm_level match_cfm_level_and_opcode"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+u8_to_hex()
+{
+	local u8=$1; shift
+
+	printf "%02x" $u8
+}
+
+generate_cfm_hdr()
+{
+	local mdl=$1; shift
+	local op=$1; shift
+	local flags=$1; shift
+	local tlv_offset=$1; shift
+
+	local cfm_hdr=$(:
+	               )"$(u8_to_hex $((mdl << 5))):"$( 	: MD level and Version
+	               )"$(u8_to_hex $op):"$(			: OpCode
+	               )"$(u8_to_hex $flags):"$(		: Flags
+	               )"$(u8_to_hex $tlv_offset)"$(		: TLV offset
+	               )
+
+	echo $cfm_hdr
+}
+
+match_cfm_opcode()
+{
+	local ethtype="89 02"; readonly ethtype
+	RET=0
+
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 101 \
+	   flower cfm op 47 action drop
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 102 \
+	   flower cfm op 43 action drop
+
+	pkt="$ethtype $(generate_cfm_hdr 7 47 0 32)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+	pkt="$ethtype $(generate_cfm_hdr 6 5 0 4)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct opcode"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_err $? "Matched on the wrong opcode"
+
+	pkt="$ethtype $(generate_cfm_hdr 0 43 0 12)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Matched on the wrong opcode"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct opcode"
+
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 102 flower
+
+	log_test "CFM opcode match test"
+}
+
+match_cfm_level()
+{
+	local ethtype="89 02"; readonly ethtype
+	RET=0
+
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 101 \
+	   flower cfm mdl 5 action drop
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 102 \
+	   flower cfm mdl 3 action drop
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 103 \
+	   flower cfm mdl 0 action drop
+
+	pkt="$ethtype $(generate_cfm_hdr 5 42 0 12)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+	pkt="$ethtype $(generate_cfm_hdr 6 1 0 70)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+	pkt="$ethtype $(generate_cfm_hdr 0 1 0 70)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct level"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_err $? "Matched on the wrong level"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on correct level"
+
+	pkt="$ethtype $(generate_cfm_hdr 3 0 0 4)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Matched on the wrong level"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct level"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Matched on the wrong level"
+
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 102 flower
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 103 flower
+
+	log_test "CFM level match test"
+}
+
+match_cfm_level_and_opcode()
+{
+	local ethtype="89 02"; readonly ethtype
+	RET=0
+
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 101 \
+	   flower cfm mdl 5 op 41 action drop
+	tc filter add dev $h2 ingress protocol cfm pref 1 handle 102 \
+	   flower cfm mdl 7 op 42 action drop
+
+	pkt="$ethtype $(generate_cfm_hdr 5 41 0 4)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+	pkt="$ethtype $(generate_cfm_hdr 7 3 0 4)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+	pkt="$ethtype $(generate_cfm_hdr 3 42 0 12)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct level and opcode"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_err $? "Matched on the wrong level and opcode"
+
+	pkt="$ethtype $(generate_cfm_hdr 7 42 0 12)"
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac "$pkt" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Matched on the wrong level and opcode"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct level and opcode"
+
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol cfm pref 1 handle 102 flower
+
+	log_test "CFM opcode and level match test"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh b/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh
new file mode 100755
index 0000000000..20a7cb7222
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower_l2_miss.sh
@@ -0,0 +1,353 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                             +----------------------+
+# | H1 (vrf)              |                             | H2 (vrf)             |
+# |    + $h1              |                             |              $h2 +   |
+# |    | 192.0.2.1/28     |                             |     192.0.2.2/28 |   |
+# |    | 2001:db8:1::1/64 |                             | 2001:db8:1::2/64 |   |
+# +----|------------------+                             +------------------|---+
+#      |                                                                   |
+# +----|-------------------------------------------------------------------|---+
+# | SW |                                                                   |   |
+# |  +-|-------------------------------------------------------------------|-+ |
+# |  | + $swp1                       BR                              $swp2 + | |
+# |  +-----------------------------------------------------------------------+ |
+# +----------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_l2_miss_unicast
+	test_l2_miss_multicast
+	test_l2_miss_ll_multicast
+	test_l2_miss_broadcast
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+test_l2_miss_unicast()
+{
+	local dmac=00:01:02:03:04:05
+	local dip=192.0.2.2
+	local sip=192.0.2.1
+
+	RET=0
+
+	# Unknown unicast.
+	tc filter add dev $swp2 egress protocol ipv4 handle 101 pref 1 \
+	   flower indev $swp1 l2_miss 1 dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+	# Known unicast.
+	tc filter add dev $swp2 egress protocol ipv4 handle 102 pref 1 \
+	   flower indev $swp1 l2_miss 0 dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+
+	# Before adding FDB entry.
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unknown unicast filter was not hit before adding FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 0
+	check_err $? "Known unicast filter was hit before adding FDB entry"
+
+	# Adding FDB entry.
+	bridge fdb replace $dmac dev $swp2 master static
+
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unknown unicast filter was hit after adding FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Known unicast filter was not hit after adding FDB entry"
+
+	# Deleting FDB entry.
+	bridge fdb del $dmac dev $swp2 master static
+
+	$MZ $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 2
+	check_err $? "Unknown unicast filter was not hit after deleting FDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Known unicast filter was hit after deleting FDB entry"
+
+	tc filter del dev $swp2 egress protocol ipv4 pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol ipv4 pref 1 handle 101 flower
+
+	log_test "L2 miss - Unicast"
+}
+
+test_l2_miss_multicast_common()
+{
+	local proto=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local dmac=$1; shift
+	local mode=$1; shift
+	local name=$1; shift
+
+	RET=0
+
+	# Unregistered multicast.
+	tc filter add dev $swp2 egress protocol $proto handle 101 pref 1 \
+	   flower indev $swp1 l2_miss 1 src_ip $sip dst_ip $dip \
+	   action pass
+	# Registered multicast.
+	tc filter add dev $swp2 egress protocol $proto handle 102 pref 1 \
+	   flower indev $swp1 l2_miss 0 src_ip $sip dst_ip $dip \
+	   action pass
+
+	# Before adding MDB entry.
+	$MZ $mode $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unregistered multicast filter was not hit before adding MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 0
+	check_err $? "Registered multicast filter was hit before adding MDB entry"
+
+	# Adding MDB entry.
+	bridge mdb replace dev br1 port $swp2 grp $dip permanent
+
+	$MZ $mode $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Unregistered multicast filter was hit after adding MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Registered multicast filter was not hit after adding MDB entry"
+
+	# Deleting MDB entry.
+	bridge mdb del dev br1 port $swp2 grp $dip
+
+	$MZ $mode $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 2
+	check_err $? "Unregistered multicast filter was not hit after deleting MDB entry"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "Registered multicast filter was hit after deleting MDB entry"
+
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 101 flower
+
+	log_test "L2 miss - Multicast ($name)"
+}
+
+test_l2_miss_multicast_ipv4()
+{
+	local proto="ipv4"
+	local sip=192.0.2.1
+	local dip=239.1.1.1
+	local dmac=01:00:5e:01:01:01
+	local mode="-4"
+	local name="IPv4"
+
+	test_l2_miss_multicast_common $proto $sip $dip $dmac $mode $name
+}
+
+test_l2_miss_multicast_ipv6()
+{
+	local proto="ipv6"
+	local sip=2001:db8:1::1
+	local dip=ff0e::1
+	local dmac=33:33:00:00:00:01
+	local mode="-6"
+	local name="IPv6"
+
+	test_l2_miss_multicast_common $proto $sip $dip $dmac $mode $name
+}
+
+test_l2_miss_multicast()
+{
+	# Configure $swp2 as a multicast router port so that it will forward
+	# both registered and unregistered multicast traffic.
+	bridge link set dev $swp2 mcast_router 2
+
+	# Forwarding according to MDB entries only takes place when the bridge
+	# detects that there is a valid querier in the network. Set the bridge
+	# as the querier and assign it a valid IPv6 link-local address to be
+	# used as the source address for MLD queries.
+	ip link set dev br1 type bridge mcast_querier 1
+	ip -6 address add fe80::1/64 nodad dev br1
+	# Wait the default Query Response Interval (10 seconds) for the bridge
+	# to determine that there are no other queriers in the network.
+	sleep 10
+
+	test_l2_miss_multicast_ipv4
+	test_l2_miss_multicast_ipv6
+
+	ip -6 address del fe80::1/64 dev br1
+	ip link set dev br1 type bridge mcast_querier 0
+	bridge link set dev $swp2 mcast_router 1
+}
+
+test_l2_miss_multicast_common2()
+{
+	local name=$1; shift
+	local dmac=$1; shift
+	local dip=224.0.0.1
+	local sip=192.0.2.1
+
+}
+
+test_l2_miss_ll_multicast_common()
+{
+	local proto=$1; shift
+	local dmac=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local mode=$1; shift
+	local name=$1; shift
+
+	RET=0
+
+	tc filter add dev $swp2 egress protocol $proto handle 101 pref 1 \
+	   flower indev $swp1 l2_miss 1 dst_mac $dmac src_ip $sip \
+	   dst_ip $dip action pass
+
+	$MZ $mode $h1 -a own -b $dmac -t ip -A $sip -B $dip -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Filter was not hit"
+
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 101 flower
+
+	log_test "L2 miss - Link-local multicast ($name)"
+}
+
+test_l2_miss_ll_multicast_ipv4()
+{
+	local proto=ipv4
+	local dmac=01:00:5e:00:00:01
+	local sip=192.0.2.1
+	local dip=224.0.0.1
+	local mode="-4"
+	local name="IPv4"
+
+	test_l2_miss_ll_multicast_common $proto $dmac $sip $dip $mode $name
+}
+
+test_l2_miss_ll_multicast_ipv6()
+{
+	local proto=ipv6
+	local dmac=33:33:00:00:00:01
+	local sip=2001:db8:1::1
+	local dip=ff02::1
+	local mode="-6"
+	local name="IPv6"
+
+	test_l2_miss_ll_multicast_common $proto $dmac $sip $dip $mode $name
+}
+
+test_l2_miss_ll_multicast()
+{
+	test_l2_miss_ll_multicast_ipv4
+	test_l2_miss_ll_multicast_ipv6
+}
+
+test_l2_miss_broadcast()
+{
+	local dmac=ff:ff:ff:ff:ff:ff
+	local smac=00:01:02:03:04:05
+
+	RET=0
+
+	tc filter add dev $swp2 egress protocol all handle 101 pref 1 \
+	   flower l2_miss 1 dst_mac $dmac src_mac $smac \
+	   action pass
+	tc filter add dev $swp2 egress protocol all handle 102 pref 1 \
+	   flower l2_miss 0 dst_mac $dmac src_mac $smac \
+	   action pass
+
+	$MZ $h1 -a $smac -b $dmac -c 1 -p 100 -q
+
+	tc_check_packets "dev $swp2 egress" 101 0
+	check_err $? "L2 miss filter was hit when should not"
+
+	tc_check_packets "dev $swp2 egress" 102 1
+	check_err $? "L2 no miss filter was not hit when should"
+
+	tc filter del dev $swp2 egress protocol all pref 1 handle 102 flower
+	tc filter del dev $swp2 egress protocol all pref 1 handle 101 flower
+
+	log_test "L2 miss - Broadcast"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_port_range.sh b/tools/testing/selftests/net/forwarding/tc_flower_port_range.sh
new file mode 100755
index 0000000000..3885a2a91f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower_port_range.sh
@@ -0,0 +1,228 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                             +----------------------+
+# | H1 (vrf)              |                             | H2 (vrf)             |
+# |    + $h1              |                             |              $h2 +   |
+# |    | 192.0.2.1/28     |                             |     192.0.2.2/28 |   |
+# |    | 2001:db8:1::1/64 |                             | 2001:db8:1::2/64 |   |
+# +----|------------------+                             +------------------|---+
+#      |                                                                   |
+# +----|-------------------------------------------------------------------|---+
+# | SW |                                                                   |   |
+# |  +-|-------------------------------------------------------------------|-+ |
+# |  | + $swp1                       BR                              $swp2 + | |
+# |  +-----------------------------------------------------------------------+ |
+# +----------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_port_range_ipv4_udp
+	test_port_range_ipv4_tcp
+	test_port_range_ipv6_udp
+	test_port_range_ipv6_tcp
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	ip link set dev br1 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev br1 down
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+__test_port_range()
+{
+	local proto=$1; shift
+	local ip_proto=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local mode=$1; shift
+	local name=$1; shift
+	local dmac=$(mac_get $h2)
+	local smac=$(mac_get $h1)
+	local sport_min=100
+	local sport_max=200
+	local sport_mid=$((sport_min + (sport_max - sport_min) / 2))
+	local dport_min=300
+	local dport_max=400
+	local dport_mid=$((dport_min + (dport_max - dport_min) / 2))
+
+	RET=0
+
+	tc filter add dev $swp1 ingress protocol $proto handle 101 pref 1 \
+		flower src_ip $sip dst_ip $dip ip_proto $ip_proto \
+		src_port $sport_min-$sport_max \
+		dst_port $dport_min-$dport_max \
+		action pass
+	tc filter add dev $swp2 egress protocol $proto handle 101 pref 1 \
+		flower src_ip $sip dst_ip $dip ip_proto $ip_proto \
+		src_port $sport_min-$sport_max \
+		dst_port $dport_min-$dport_max \
+		action drop
+
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$sport_min,dp=$dport_min"
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_err $? "Ingress filter not hit with minimum ports"
+	tc_check_packets "dev $swp2 egress" 101 1
+	check_err $? "Egress filter not hit with minimum ports"
+
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$sport_mid,dp=$dport_mid"
+	tc_check_packets "dev $swp1 ingress" 101 2
+	check_err $? "Ingress filter not hit with middle ports"
+	tc_check_packets "dev $swp2 egress" 101 2
+	check_err $? "Egress filter not hit with middle ports"
+
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$sport_max,dp=$dport_max"
+	tc_check_packets "dev $swp1 ingress" 101 3
+	check_err $? "Ingress filter not hit with maximum ports"
+	tc_check_packets "dev $swp2 egress" 101 3
+	check_err $? "Egress filter not hit with maximum ports"
+
+	# Send traffic when both ports are out of range and when only one port
+	# is out of range.
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$((sport_min - 1)),dp=$dport_min"
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$((sport_max + 1)),dp=$dport_min"
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$sport_min,dp=$((dport_min - 1))"
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$sport_min,dp=$((dport_max + 1))"
+	$MZ $mode $h1 -c 1 -q -p 100 -a $smac -b $dmac -A $sip -B $dip \
+		-t $ip_proto "sp=$((sport_max + 1)),dp=$((dport_max + 1))"
+	tc_check_packets "dev $swp1 ingress" 101 3
+	check_err $? "Ingress filter was hit when should not"
+	tc_check_packets "dev $swp2 egress" 101 3
+	check_err $? "Egress filter was hit when should not"
+
+	tc filter del dev $swp2 egress protocol $proto pref 1 handle 101 flower
+	tc filter del dev $swp1 ingress protocol $proto pref 1 handle 101 flower
+
+	log_test "Port range matching - $name"
+}
+
+test_port_range_ipv4_udp()
+{
+	local proto=ipv4
+	local ip_proto=udp
+	local sip=192.0.2.1
+	local dip=192.0.2.2
+	local mode="-4"
+	local name="IPv4 UDP"
+
+	__test_port_range $proto $ip_proto $sip $dip $mode "$name"
+}
+
+test_port_range_ipv4_tcp()
+{
+	local proto=ipv4
+	local ip_proto=tcp
+	local sip=192.0.2.1
+	local dip=192.0.2.2
+	local mode="-4"
+	local name="IPv4 TCP"
+
+	__test_port_range $proto $ip_proto $sip $dip $mode "$name"
+}
+
+test_port_range_ipv6_udp()
+{
+	local proto=ipv6
+	local ip_proto=udp
+	local sip=2001:db8:1::1
+	local dip=2001:db8:1::2
+	local mode="-6"
+	local name="IPv6 UDP"
+
+	__test_port_range $proto $ip_proto $sip $dip $mode "$name"
+}
+
+test_port_range_ipv6_tcp()
+{
+	local proto=ipv6
+	local ip_proto=tcp
+	local sip=2001:db8:1::1
+	local dip=2001:db8:1::2
+	local mode="-6"
+	local name="IPv6 TCP"
+
+	__test_port_range $proto $ip_proto $sip $dip $mode "$name"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_router.sh b/tools/testing/selftests/net/forwarding/tc_flower_router.sh
new file mode 100755
index 0000000000..4aee9c9e69
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower_router.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="match_indev_egress_test"
+NUM_NETIFS=6
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+
+	ip route add 192.0.2.0/24 vrf v$h1 nexthop via 192.0.1.2
+	ip route add 192.0.3.0/24 vrf v$h1 nexthop via 192.0.1.2
+}
+
+h1_destroy()
+{
+	ip route del 192.0.3.0/24 vrf v$h1
+	ip route del 192.0.2.0/24 vrf v$h1
+
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+
+	ip route add 192.0.1.0/24 vrf v$h2 nexthop via 192.0.2.2
+	ip route add 192.0.3.0/24 vrf v$h2 nexthop via 192.0.2.2
+}
+
+h2_destroy()
+{
+	ip route del 192.0.3.0/24 vrf v$h2
+	ip route del 192.0.1.0/24 vrf v$h2
+
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.3.1/24
+
+	ip route add 192.0.1.0/24 vrf v$h3 nexthop via 192.0.3.2
+	ip route add 192.0.2.0/24 vrf v$h3 nexthop via 192.0.3.2
+}
+
+h3_destroy()
+{
+	ip route del 192.0.2.0/24 vrf v$h3
+	ip route del 192.0.1.0/24 vrf v$h3
+
+	simple_if_fini $h3 192.0.3.1/24
+}
+
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	tc qdisc add dev $rp3 clsact
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev $rp3
+}
+
+router_destroy()
+{
+	ip address del 192.0.3.2/24 dev $rp3
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	tc qdisc del dev $rp3 clsact
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+match_indev_egress_test()
+{
+	RET=0
+
+	tc filter add dev $rp3 egress protocol ip pref 1 handle 101 flower \
+		$tcflags indev $rp1 dst_ip 192.0.3.1 action drop
+	tc filter add dev $rp3 egress protocol ip pref 2 handle 102 flower \
+		$tcflags indev $rp2 dst_ip 192.0.3.1 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac -A 192.0.1.1 -B 192.0.3.1 \
+		-t ip -q
+
+	tc_check_packets "dev $rp3 egress" 102 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $rp3 egress" 101 1
+	check_err $? "Did not match on correct filter"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $rp2mac -A 192.0.2.1 -B 192.0.3.1 \
+		-t ip -q
+
+	tc_check_packets "dev $rp3 egress" 101 2
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $rp3 egress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $rp3 egress protocol ip pref 2 handle 102 flower
+	tc filter del dev $rp3 egress protocol ip pref 1 handle 101 flower
+
+	log_test "indev egress match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	h2=${NETIFS[p3]}
+	rp2=${NETIFS[p4]}
+
+	h3=${NETIFS[p5]}
+	rp3=${NETIFS[p6]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+	h2mac=$(mac_get $h2)
+	rp2mac=$(mac_get $rp2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh b/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh
new file mode 100755
index 0000000000..03743f04e1
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_mpls_l2vpn.sh
@@ -0,0 +1,192 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+
+# | H1 (v$h1)             |
+# | 192.0.2.1/24          |
+# | 2001:db8::1/124       |
+# |                 + $h1 |
+# +-----------------|-----+
+#                   |
+#                   | (Plain Ethernet traffic)
+#                   |
+# +-----------------|-----------------------------------------+
+# | LER1            + $edge1                                  |
+# |                     -ingress:                             |
+# |                       -encapsulate Ethernet into MPLS     |
+# |                       -add outer Ethernet header          |
+# |                       -redirect to $mpls1 (egress)        |
+# |                                                           |
+# |                 + $mpls1                                  |
+# |                 |   -ingress:                             |
+# |                 |     -remove outer Ethernet header       |
+# |                 |     -remove MPLS header                 |
+# |                 |     -redirect to $edge1 (egress)        |
+# +-----------------|-----------------------------------------+
+#                   |
+#                   | (Ethernet over MPLS traffic)
+#                   |
+# +-----------------|-----------------------------------------+
+# | LER2            + $mpls2                                  |
+# |                     -ingress:                             |
+# |                       -remove outer Ethernet header       |
+# |                       -remove MPLS header                 |
+# |                       -redirect to $edge2 (egress)        |
+# |                                                           |
+# |                 + $edge2                                  |
+# |                 |   -ingress:                             |
+# |                 |     -encapsulate Ethernet into MPLS     |
+# |                 |     -add outer Ethernet header          |
+# |                 |     -redirect to $mpls2 (egress)        |
+# +-----------------|-----------------------------------------|
+#                   |
+#                   | (Plain Ethernet traffic)
+#                   |
+# +-----------------|-----+
+# | H2 (v$h2)       |     |
+# |                 + $h2 |
+# | 192.0.2.2/24          |
+# | 2001:db8::2/124       |
+# +-----------------------+
+#
+# LER1 and LER2 logically represent two different routers. However, no VRF is
+# created for them, as they don't do any IP routing.
+
+ALL_TESTS="mpls_forward_eth"
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8::1/124
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8::1/124
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8::2/124
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8::2/124
+}
+
+ler1_create()
+{
+	tc qdisc add dev $edge1 ingress
+	tc filter add dev $edge1 ingress                            \
+	   matchall                                                 \
+	   action mpls mac_push label 102                           \
+	   action vlan push_eth dst_mac $mpls2mac src_mac $mpls1mac \
+	   action mirred egress redirect dev $mpls1
+	ip link set dev $edge1 up
+
+	tc qdisc add dev $mpls1 ingress
+	tc filter add dev $mpls1 ingress            \
+	   protocol mpls_uc                         \
+	   flower mpls_label 101                    \
+	   action vlan pop_eth                      \
+	   action mpls pop protocol teb             \
+	   action mirred egress redirect dev $edge1
+	ip link set dev $mpls1 up
+}
+
+ler1_destroy()
+{
+	ip link set dev $mpls1 down
+	tc qdisc del dev $mpls1 ingress
+
+	ip link set dev $edge1 down
+	tc qdisc del dev $edge1 ingress
+}
+
+ler2_create()
+{
+	tc qdisc add dev $edge2 ingress
+	tc filter add dev $edge2 ingress                            \
+	   matchall                                                 \
+	   action mpls mac_push label 101                           \
+	   action vlan push_eth dst_mac $mpls1mac src_mac $mpls2mac \
+	   action mirred egress redirect dev $mpls2
+	ip link set dev $edge2 up
+
+	tc qdisc add dev $mpls2 ingress
+	tc filter add dev $mpls2 ingress            \
+	   protocol mpls_uc                         \
+	   flower mpls_label 102                    \
+	   action vlan pop_eth                      \
+	   action mpls pop protocol teb             \
+	   action mirred egress redirect dev $edge2
+	ip link set dev $mpls2 up
+}
+
+ler2_destroy()
+{
+	ip link set dev $mpls2 down
+	tc qdisc del dev $mpls2 ingress
+
+	ip link set dev $edge2 down
+	tc qdisc del dev $edge2 ingress
+}
+
+mpls_forward_eth()
+{
+	ping_test $h1 192.0.2.2
+	ping6_test $h1 2001:db8::2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	edge1=${NETIFS[p2]}
+
+	mpls1=${NETIFS[p3]}
+	mpls2=${NETIFS[p4]}
+
+	edge2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	mpls1mac=$(mac_get $mpls1)
+	mpls2mac=$(mac_get $mpls2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	ler1_create
+	ler2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ler2_destroy
+	ler1_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_police.sh b/tools/testing/selftests/net/forwarding/tc_police.sh
new file mode 100755
index 0000000000..0a51eef21b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_police.sh
@@ -0,0 +1,441 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test tc-police action.
+#
+# +---------------------------------+
+# | H1 (vrf)                        |
+# |    + $h1                        |
+# |    | 192.0.2.1/24               |
+# |    |                            |
+# |    |  default via 192.0.2.2     |
+# +----|----------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# | SW |                                                                      |
+# |    + $rp1                                                                 |
+# |        192.0.2.2/24                                                       |
+# |                                                                           |
+# |        198.51.100.2/24                           203.0.113.2/24           |
+# |    + $rp2                                    + $rp3                       |
+# |    |                                         |                            |
+# +----|-----------------------------------------|----------------------------+
+#      |                                         |
+# +----|----------------------------+       +----|----------------------------+
+# |    |  default via 198.51.100.2  |       |    |  default via 203.0.113.2   |
+# |    |                            |       |    |                            |
+# |    | 198.51.100.1/24            |       |    | 203.0.113.1/24             |
+# |    + $h2                        |       |    + $h3                        |
+# | H2 (vrf)                        |       | H3 (vrf)                        |
+# +---------------------------------+       +---------------------------------+
+
+ALL_TESTS="
+	police_rx_test
+	police_tx_test
+	police_shared_test
+	police_rx_mirror_test
+	police_tx_mirror_test
+	police_pps_rx_test
+	police_pps_tx_test
+	police_mtu_rx_test
+	police_mtu_tx_test
+"
+NUM_NETIFS=6
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+
+	ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
+
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.1/24
+
+	ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
+
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+
+	ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
+
+	simple_if_fini $h2 198.51.100.1/24
+}
+
+h3_create()
+{
+	simple_if_init $h3 203.0.113.1/24
+
+	ip -4 route add default vrf v$h3 nexthop via 203.0.113.2
+
+	tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+
+	ip -4 route del default vrf v$h3 nexthop via 203.0.113.2
+
+	simple_if_fini $h3 203.0.113.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	__addr_add_del $rp1 add 192.0.2.2/24
+	__addr_add_del $rp2 add 198.51.100.2/24
+	__addr_add_del $rp3 add 203.0.113.2/24
+
+	tc qdisc add dev $rp1 clsact
+	tc qdisc add dev $rp2 clsact
+}
+
+router_destroy()
+{
+	tc qdisc del dev $rp2 clsact
+	tc qdisc del dev $rp1 clsact
+
+	__addr_add_del $rp3 del 203.0.113.2/24
+	__addr_add_del $rp2 del 198.51.100.2/24
+	__addr_add_del $rp1 del 192.0.2.2/24
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+police_common_test()
+{
+	local test_name=$1; shift
+
+	RET=0
+
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_rx_test()
+{
+	# Rule to police traffic destined to $h2 on ingress of $rp1
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok
+
+	police_common_test "police on rx"
+
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_tx_test()
+{
+	# Rule to police traffic destined to $h2 on egress of $rp2
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok
+
+	police_common_test "police on tx"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+}
+
+police_shared_common_test()
+{
+	local dport=$1; shift
+	local test_name=$1; shift
+
+	RET=0
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=$dport -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+police_shared_test()
+{
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp src_port 12345 \
+		action drop
+
+	# Rule to police traffic destined to $h2 on ingress of $rp1
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok \
+		index 10
+
+	# Rule to police a different flow destined to $h2 on egress of $rp2
+	# using same policer
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 22222 \
+		action police index 10
+
+	police_shared_common_test 54321 "police with shared policer - rx"
+
+	police_shared_common_test 22222 "police with shared policer - tx"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_mirror_common_test()
+{
+	local pol_if=$1; shift
+	local dir=$1; shift
+	local test_name=$1; shift
+
+	RET=0
+
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	# Rule to measure bandwidth of mirrored traffic on ingress of $h3
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	# Rule to police traffic destined to $h2 and mirror to $h3
+	tc filter add dev $pol_if $dir protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/pipe \
+		action mirred egress mirror dev $rp3
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	local t0=$(tc_rule_stats_get $h3 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h3 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+	tc filter del dev $pol_if $dir protocol ip pref 1 handle 101 flower
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_rx_mirror_test()
+{
+	police_mirror_common_test $rp1 ingress "police rx and mirror"
+}
+
+police_tx_mirror_test()
+{
+	police_mirror_common_test $rp2 egress "police tx and mirror"
+}
+
+police_pps_common_test()
+{
+	local test_name=$1; shift
+
+	RET=0
+
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .packets)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .packets)
+
+	local er=$((2000))
+	local nr=$(packets_rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_pps_rx_test()
+{
+	# Rule to police traffic destined to $h2 on ingress of $rp1
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police pkts_rate 2000 pkts_burst 400 conform-exceed drop/ok
+
+	police_pps_common_test "police pps on rx"
+
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_pps_tx_test()
+{
+	# Rule to police traffic destined to $h2 on egress of $rp2
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police pkts_rate 2000 pkts_burst 400 conform-exceed drop/ok
+
+	police_pps_common_test "police pps on tx"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+}
+
+police_mtu_common_test() {
+	RET=0
+
+	local test_name=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter add dev $dev $direction protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police mtu 1042 conform-exceed drop/ok
+
+	# to count "conform" packets
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1001 -c 10 -q
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 3 -q
+
+	tc_check_packets "dev $dev $direction" 101 13
+	check_err $? "wrong packet counter"
+
+	# "exceed" packets
+	local overlimits_t0=$(tc_rule_stats_get ${dev} 1 ${direction} .overlimits)
+	test ${overlimits_t0} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits_t0}"
+
+	# "conform" packets
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "forwarding error"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $dev $direction protocol ip pref 1 handle 101 flower
+
+	log_test "$test_name"
+}
+
+police_mtu_rx_test()
+{
+	police_mtu_common_test "police mtu (rx)" $rp1 ingress
+}
+
+police_mtu_tx_test()
+{
+	police_mtu_common_test "police mtu (tx)" $rp2 egress
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	h3_create
+	router_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	router_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_shblocks.sh b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
new file mode 100755
index 0000000000..772e00ac32
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
@@ -0,0 +1,152 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="shared_block_test match_indev_test"
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 ingress_block 22 egress_block 23 clsact
+
+	simple_if_init $swp2 192.0.2.2/24
+	tc qdisc add dev $swp2 ingress_block 22 egress_block 23 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	simple_if_fini $swp2 192.0.2.2/24
+
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+shared_block_test()
+{
+	RET=0
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 1
+	check_err $? "Did not match first incoming packet on a block"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 2
+	check_err $? "Did not match second incoming packet on a block"
+
+	tc filter del block 22 protocol ip pref 1 handle 101 flower
+
+	log_test "shared block ($tcflags)"
+}
+
+match_indev_test()
+{
+	RET=0
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		$tcflags indev $swp1 dst_mac $swmac action drop
+	tc filter add block 22 protocol ip pref 2 handle 102 flower \
+		$tcflags indev $swp2 dst_mac $swmac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 1
+	check_err $? "Did not match first incoming packet on a block"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 102 1
+	check_err $? "Did not match second incoming packet on a block"
+
+	tc filter del block 22 protocol ip pref 1 handle 101 flower
+	tc filter del block 22 protocol ip pref 2 handle 102 flower
+
+	log_test "indev match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp2 address $swmac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+}
+
+check_tc_shblock_support
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
new file mode 100755
index 0000000000..5a5dd90348
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
@@ -0,0 +1,164 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+ALL_TESTS="tunnel_key_nofrag_test"
+
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	forwarding_enable
+	mtu_set $h1 1500
+	tunnel_create h1-et vxlan 192.0.2.1 192.0.2.2 dev $h1 dstport 0 external
+	tc qdisc add dev h1-et clsact
+	mtu_set h1-et 1230
+	mtu_restore $h1
+	mtu_set $h1 1000
+}
+
+h1_destroy()
+{
+	tc qdisc del dev h1-et clsact
+	tunnel_destroy h1-et
+	forwarding_restore
+	mtu_restore $h1
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 clsact
+	simple_if_init $swp2 192.0.2.1/24
+}
+
+switch_destroy()
+{
+	simple_if_fini $swp2 192.0.2.1/24
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swp1origmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp1 address $h2mac
+	ip link set $swp2 address $h1mac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+
+	if ! tc action add action tunnel_key help 2>&1 | grep -q nofrag; then
+		log_test "SKIP: iproute doesn't support nofrag"
+		exit $ksft_skip
+	fi
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+	ip link set $swp1 address $swp1origmac
+}
+
+tunnel_key_nofrag_test()
+{
+	RET=0
+	local i
+
+	tc filter add dev $swp1 ingress protocol ip pref 100 handle 100 \
+		flower src_ip 192.0.2.1 dst_ip 192.0.2.2 ip_proto udp \
+		ip_flags nofrag action drop
+	tc filter add dev $swp1 ingress protocol ip pref 101 handle 101 \
+		flower src_ip 192.0.2.1 dst_ip 192.0.2.2 ip_proto udp \
+		ip_flags firstfrag action drop
+	tc filter add dev $swp1 ingress protocol ip pref 102 handle 102 \
+		flower src_ip 192.0.2.1 dst_ip 192.0.2.2 ip_proto udp \
+		ip_flags nofirstfrag action drop
+
+	# test 'nofrag' set
+	tc filter add dev h1-et egress protocol all pref 1 handle 1 matchall $tcflags \
+		action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 nofrag index 10
+	$MZ h1-et -c 1 -p 930 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1 ingress" 100 1
+	check_err $? "packet smaller than MTU was not tunneled"
+
+	$MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1 ingress" 100 1
+	check_err $? "packet bigger than MTU matched nofrag (nofrag was set)"
+	tc_check_packets "dev $swp1 ingress" 101 0
+	check_err $? "packet bigger than MTU matched firstfrag (nofrag was set)"
+	tc_check_packets "dev $swp1 ingress" 102 0
+	check_err $? "packet bigger than MTU matched nofirstfrag (nofrag was set)"
+
+	# test 'nofrag' cleared
+	tc actions change action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 index 10
+	$MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1  ingress" 100 1
+	check_err $? "packet bigger than MTU matched nofrag (nofrag was unset)"
+	tc_check_packets "dev $swp1  ingress" 101 1
+	check_err $? "packet bigger than MTU didn't match firstfrag (nofrag was unset) "
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "packet bigger than MTU didn't match nofirstfrag (nofrag was unset) "
+
+	for i in 100 101 102; do
+		tc filter del dev $swp1 ingress protocol ip pref $i handle $i flower
+	done
+	tc filter del dev h1-et egress pref 1 handle 1 matchall
+
+	log_test "tunnel_key nofrag ($tcflags)"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh
new file mode 100755
index 0000000000..45378905cb
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh
@@ -0,0 +1,164 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	vlan_modify_ingress
+	vlan_modify_egress
+"
+
+NUM_NETIFS=4
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 85 v$h1 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 85
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	vlan_create $h2 65 v$h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 65
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	bridge vlan add dev $swp1 vid 85
+	bridge vlan add dev $swp2 vid 65
+
+	bridge vlan add dev $swp2 vid 85
+	bridge vlan add dev $swp1 vid 65
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	bridge vlan del vid 65 dev $swp1
+	bridge vlan del vid 85 dev $swp2
+
+	bridge vlan del vid 65 dev $swp2
+	bridge vlan del vid 85 dev $swp1
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlan_modify_ingress()
+{
+	RET=0
+
+	ping_do $h1.85 192.0.2.18
+	check_fail $? "ping between two different vlans passed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_fail $? "ping6 between two different vlans passed when should not"
+
+	tc filter add dev $swp1 ingress protocol all pref 1 handle 1 \
+		flower action vlan modify id 65
+	tc filter add dev $swp2 ingress protocol all pref 1 handle 1 \
+		flower action vlan modify id 85
+
+	ping_do $h1.85 192.0.2.18
+	check_err $? "ping between two different vlans failed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_err $? "ping6 between two different vlans failed when should not"
+
+	log_test "VLAN modify at ingress"
+
+	tc filter del dev $swp2 ingress protocol all pref 1 handle 1 flower
+	tc filter del dev $swp1 ingress protocol all pref 1 handle 1 flower
+}
+
+vlan_modify_egress()
+{
+	RET=0
+
+	ping_do $h1.85 192.0.2.18
+	check_fail $? "ping between two different vlans passed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_fail $? "ping6 between two different vlans passed when should not"
+
+	tc filter add dev $swp1 egress protocol all pref 1 handle 1 \
+		flower action vlan modify id 85
+	tc filter add dev $swp2 egress protocol all pref 1 handle 1 \
+		flower action vlan modify id 65
+
+	ping_do $h1.85 192.0.2.18
+	check_err $? "ping between two different vlans failed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_err $? "ping6 between two different vlans failed when should not"
+
+	log_test "VLAN modify at egress"
+
+	tc filter del dev $swp2 egress protocol all pref 1 handle 1 flower
+	tc filter del dev $swp1 egress protocol all pref 1 handle 1 flower
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tsn_lib.sh b/tools/testing/selftests/net/forwarding/tsn_lib.sh
new file mode 100644
index 0000000000..b91bcd8008
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tsn_lib.sh
@@ -0,0 +1,249 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2021-2022 NXP
+
+REQUIRE_ISOCHRON=${REQUIRE_ISOCHRON:=yes}
+REQUIRE_LINUXPTP=${REQUIRE_LINUXPTP:=yes}
+
+# Tunables
+UTC_TAI_OFFSET=37
+ISOCHRON_CPU=1
+
+if [[ "$REQUIRE_ISOCHRON" = "yes" ]]; then
+	# https://github.com/vladimiroltean/tsn-scripts
+	# WARNING: isochron versions pre-1.0 are unstable,
+	# always use the latest version
+	require_command isochron
+fi
+if [[ "$REQUIRE_LINUXPTP" = "yes" ]]; then
+	require_command phc2sys
+	require_command ptp4l
+fi
+
+phc2sys_start()
+{
+	local uds_address=$1
+	local extra_args=""
+
+	if ! [ -z "${uds_address}" ]; then
+		extra_args="${extra_args} -z ${uds_address}"
+	fi
+
+	phc2sys_log="$(mktemp)"
+
+	chrt -f 10 phc2sys -m \
+		-a -rr \
+		--step_threshold 0.00002 \
+		--first_step_threshold 0.00002 \
+		${extra_args} \
+		> "${phc2sys_log}" 2>&1 &
+	phc2sys_pid=$!
+
+	echo "phc2sys logs to ${phc2sys_log} and has pid ${phc2sys_pid}"
+
+	sleep 1
+}
+
+phc2sys_stop()
+{
+	{ kill ${phc2sys_pid} && wait ${phc2sys_pid}; } 2> /dev/null
+	rm "${phc2sys_log}" 2> /dev/null
+}
+
+# Replace space separators from interface list with underscores
+if_names_to_label()
+{
+	local if_name_list="$1"
+
+	echo "${if_name_list/ /_}"
+}
+
+ptp4l_start()
+{
+	local if_names="$1"
+	local slave_only=$2
+	local uds_address=$3
+	local log="ptp4l_log_$(if_names_to_label ${if_names})"
+	local pid="ptp4l_pid_$(if_names_to_label ${if_names})"
+	local extra_args=""
+
+	for if_name in ${if_names}; do
+		extra_args="${extra_args} -i ${if_name}"
+	done
+
+	if [ "${slave_only}" = true ]; then
+		extra_args="${extra_args} -s"
+	fi
+
+	# declare dynamic variables ptp4l_log_${if_name} and ptp4l_pid_${if_name}
+	# as global, so that they can be referenced later
+	declare -g "${log}=$(mktemp)"
+
+	chrt -f 10 ptp4l -m -2 -P \
+		--step_threshold 0.00002 \
+		--first_step_threshold 0.00002 \
+		--tx_timestamp_timeout 100 \
+		--uds_address="${uds_address}" \
+		${extra_args} \
+		> "${!log}" 2>&1 &
+	declare -g "${pid}=$!"
+
+	echo "ptp4l for interfaces ${if_names} logs to ${!log} and has pid ${!pid}"
+
+	sleep 1
+}
+
+ptp4l_stop()
+{
+	local if_names="$1"
+	local log="ptp4l_log_$(if_names_to_label ${if_names})"
+	local pid="ptp4l_pid_$(if_names_to_label ${if_names})"
+
+	{ kill ${!pid} && wait ${!pid}; } 2> /dev/null
+	rm "${!log}" 2> /dev/null
+}
+
+cpufreq_max()
+{
+	local cpu=$1
+	local freq="cpu${cpu}_freq"
+	local governor="cpu${cpu}_governor"
+
+	# Kernel may be compiled with CONFIG_CPU_FREQ disabled
+	if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then
+		return
+	fi
+
+	# declare dynamic variables cpu${cpu}_freq and cpu${cpu}_governor as
+	# global, so they can be referenced later
+	declare -g "${freq}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq)"
+	declare -g "${governor}=$(cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor)"
+
+	cat /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_max_freq > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq
+	echo -n "performance" > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor
+}
+
+cpufreq_restore()
+{
+	local cpu=$1
+	local freq="cpu${cpu}_freq"
+	local governor="cpu${cpu}_governor"
+
+	if ! [ -d /sys/bus/cpu/devices/cpu${cpu}/cpufreq ]; then
+		return
+	fi
+
+	echo "${!freq}" > /sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_min_freq
+	echo -n "${!governor}" > \
+		/sys/bus/cpu/devices/cpu${cpu}/cpufreq/scaling_governor
+}
+
+isochron_recv_start()
+{
+	local if_name=$1
+	local uds=$2
+	local stats_port=$3
+	local extra_args=$4
+	local pid="isochron_pid_${stats_port}"
+
+	if ! [ -z "${uds}" ]; then
+		extra_args="${extra_args} --unix-domain-socket ${uds}"
+	fi
+
+	isochron rcv \
+		--interface ${if_name} \
+		--sched-priority 98 \
+		--sched-fifo \
+		--utc-tai-offset ${UTC_TAI_OFFSET} \
+		--stats-port ${stats_port} \
+		--quiet \
+		${extra_args} & \
+	declare -g "${pid}=$!"
+
+	sleep 1
+}
+
+isochron_recv_stop()
+{
+	local stats_port=$1
+	local pid="isochron_pid_${stats_port}"
+
+	{ kill ${!pid} && wait ${!pid}; } 2> /dev/null
+}
+
+isochron_do()
+{
+	local sender_if_name=$1; shift
+	local receiver_if_name=$1; shift
+	local sender_uds=$1; shift
+	local receiver_uds=$1; shift
+	local base_time=$1; shift
+	local cycle_time=$1; shift
+	local shift_time=$1; shift
+	local num_pkts=$1; shift
+	local vid=$1; shift
+	local priority=$1; shift
+	local dst_ip=$1; shift
+	local isochron_dat=$1; shift
+	local extra_args=""
+	local receiver_extra_args=""
+	local vrf="$(master_name_get ${sender_if_name})"
+	local use_l2="true"
+
+	if ! [ -z "${dst_ip}" ]; then
+		use_l2="false"
+	fi
+
+	if ! [ -z "${vrf}" ]; then
+		dst_ip="${dst_ip}%${vrf}"
+	fi
+
+	if ! [ -z "${vid}" ]; then
+		vid="--vid=${vid}"
+	fi
+
+	if [ -z "${receiver_uds}" ]; then
+		extra_args="${extra_args} --omit-remote-sync"
+	fi
+
+	if ! [ -z "${shift_time}" ]; then
+		extra_args="${extra_args} --shift-time=${shift_time}"
+	fi
+
+	if [ "${use_l2}" = "true" ]; then
+		extra_args="${extra_args} --l2 --etype=0xdead ${vid}"
+		receiver_extra_args="--l2 --etype=0xdead"
+	else
+		extra_args="${extra_args} --l4 --ip-destination=${dst_ip}"
+		receiver_extra_args="--l4"
+	fi
+
+	cpufreq_max ${ISOCHRON_CPU}
+
+	isochron_recv_start "${h2}" "${receiver_uds}" 5000 "${receiver_extra_args}"
+
+	isochron send \
+		--interface ${sender_if_name} \
+		--unix-domain-socket ${sender_uds} \
+		--priority ${priority} \
+		--base-time ${base_time} \
+		--cycle-time ${cycle_time} \
+		--num-frames ${num_pkts} \
+		--frame-size 64 \
+		--txtime \
+		--utc-tai-offset ${UTC_TAI_OFFSET} \
+		--cpu-mask $((1 << ${ISOCHRON_CPU})) \
+		--sched-fifo \
+		--sched-priority 98 \
+		--client 127.0.0.1 \
+		--sync-threshold 5000 \
+		--output-file ${isochron_dat} \
+		${extra_args} \
+		--quiet
+
+	isochron_recv_stop 5000
+
+	cpufreq_restore ${ISOCHRON_CPU}
+}
diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
new file mode 100755
index 0000000000..43469c7de1
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -0,0 +1,577 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------+                +------------------------------+
+# |                    vrf-h1 |                |                       vrf-h2 |
+# |    + $h1                  |                |    + $h2                     |
+# |    | 10.1.1.101/24        |                |    | 10.1.2.101/24           |
+# |    | default via 10.1.1.1 |                |    | default via 10.1.2.1    |
+# +----|----------------------+                +----|-------------------------+
+#      |                                            |
+# +----|--------------------------------------------|-------------------------+
+# | SW |                                            |                         |
+# | +--|--------------------------------------------|-----------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 10.0.0.1                               local 10.0.0.1        | |
+# | |    remote 10.0.0.2                              remote 10.0.0.2       | |
+# | |    id 1000                                      id 2000               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.11/24                                       10.1.2.11/24 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |    10.1.1.1/24                                         10.1.2.1/24    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 192.0.2.1/24                                10.0.0.1/32              |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      192.0.2.2/24                                           |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 192.0.3.2/24                                           |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      192.0.3.1/24                                10.0.0.2/32              |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 10.1.1.1/24                                         10.1.2.1/24 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.12/24                                       10.1.2.12/24 |  | |
+# | |  |                                                                 |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 10.0.0.2                             local 10.0.0.2          | |
+# | |    remote 10.0.0.1                            remote 10.0.0.1         | |
+# | |    id 1000                                    id 2000                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    10.1.1.102/24        |                |    10.1.2.102/24           | |
+# | |    default via 10.1.1.1 |                |    default via 10.1.2.1    | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	arp_decap
+	arp_suppression
+"
+NUM_NETIFS=6
+source lib.sh
+
+require_command $ARPING
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/24 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/24 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 192.0.2.1/24
+	ip route add 10.0.0.2/32 nexthop via 192.0.2.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip address add 10.0.0.1/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.11/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.11/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv4.conf.all.rp_filter
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 10.0.0.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 10.0.0.2/32 nexthop via 192.0.2.2
+	ip address del dev $rp1 192.0.2.1/24
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev v1
+
+	ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+	ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+}
+
+spine_destroy()
+{
+	ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+	ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+
+	ip address del 192.0.3.2/24 dev v1
+	ip address del 192.0.2.2/24 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 192.0.3.1/24
+	ip route add 10.0.0.1/32 nexthop via 192.0.3.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 10.0.0.2/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.12/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.12/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+macs_populate()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f macs_populate
+
+macs_initialize()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	macs_populate $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
+	in_ns ns1 macs_populate $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+
+	macs_initialize
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
+	ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
+	ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
+	ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
+	ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
+}
+
+arp_decap()
+{
+	# Repeat the ping tests, but without populating the neighbours. This
+	# makes sure we correctly decapsulate ARP packets
+	log_info "deleting neighbours from vlan interfaces"
+
+	ip neigh del 10.1.1.102 dev vlan10
+	ip neigh del 10.1.2.102 dev vlan20
+
+	ping_ipv4
+
+	ip neigh replace 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+	ip neigh replace 10.1.2.102 lladdr $(in_ns ns1 mac_get w4) nud noarp \
+		dev vlan20 extern_learn
+}
+
+arp_suppression_compare()
+{
+	local expect=$1; shift
+	local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress)
+
+	(( expect == actual ))
+	check_err $? "expected $expect arps got $actual"
+}
+
+arp_suppression()
+{
+	ip link set dev vx10 type bridge_slave neigh_suppress on
+
+	in_ns ns1 tc qdisc add dev vx10 clsact
+	in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \
+		flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \
+		request action pass
+
+	# The neighbour is configured on the SVI and ARP suppression is on, so
+	# the ARP request should be suppressed
+	RET=0
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 0
+
+	log_test "neigh_suppress: on / neigh exists: yes"
+
+	# Delete the neighbour from the SVI. A single ARP request should be
+	# received by the remote VTEP
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 1
+
+	log_test "neigh_suppress: on / neigh exists: no"
+
+	# Turn off ARP suppression and make sure ARP is not suppressed,
+	# regardless of neighbour existence on the SVI
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10 &> /dev/null
+	ip link set dev vx10 type bridge_slave neigh_suppress off
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 2
+
+	log_test "neigh_suppress: off / neigh exists: no"
+
+	RET=0
+
+	ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 3
+
+	log_test "neigh_suppress: off / neigh exists: yes"
+
+	in_ns ns1 tc qdisc del dev vx10 clsact
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric_ipv6.sh
new file mode 100755
index 0000000000..f493009897
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric_ipv6.sh
@@ -0,0 +1,504 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------------------+            +-----------------------------+
+# |                         vrf-h1 |            |                      vrf-h2 |
+# |    + $h1                       |            | + $h2                       |
+# |    | 2001:db8:1::1/64          |            | | 2001:db8:2::1/64          |
+# |    | default via 2001:db8:1::3 |            | | default via 2001:db8:2::3 |
+# +----|---------------------------+            +-|---------------------------+
+#      |                                          |
+# +----|------------------------------------------|---------------------------+
+# | SW |                                          |                           |
+# | +--|------------------------------------------|-------------------------+ |
+# | |  + $swp1                         br1        + $swp2                   | |
+# | |     vid 10 pvid untagged                       vid 20 pvid untagged   | |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 2001:db8:3::1                        local 2001:db8:3::1     | |
+# | |    remote 2001:db8:3::2                       remote 2001:db8:3::2    | |
+# | |    id 1000                                    id 2000                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 2001:db8:1::2/64                               2001:db8:2::2/64 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |    2001:db8:1::3/64                               2001:db8:2::3/64    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 2001:db8:4::1/64                            2001:db8:3::1/128        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      2001:db8:4::2/64                                       |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 2001:db8:5::2/64                                       |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      2001:db8:5::1/64                            2001:db8:3::2/128        |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 2001:db8:1::3/64                               2001:db8:2::3/64 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 2001:db8:1::3/64                               2001:db8:2::3/64 |  | |
+# | |  |                                                                 |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 2001:db8:3::2                        local 2001:db8:3::2     | |
+# | |    remote 2001:db8:3::1                       remote 2001:db8:3::1    | |
+# | |    id 1000                                    id 2000                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    2001:db8:1::4/64     |                |    2001:db8:2::4/64        | |
+# | |    default via          |                |    default via             | |
+# | |    2001:db8:1::3/64     |                |    2001:db8:2::3/64        | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+	arp_decap
+"
+NUM_NETIFS=6
+source lib.sh
+
+require_command $ARPING
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/64 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/64 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 2001:db8:1::1 2001:db8:1::3
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 2001:db8:1::1 2001:db8:1::3
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 2001:db8:2::1 2001:db8:2::3
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 2001:db8:2::1 2001:db8:2::3
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 2001:db8:4::1/64
+	ip route add 2001:db8:3::2/128 nexthop via 2001:db8:4::2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 2001:db8:3::1 remote 2001:db8:3::2 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 2001:db8:3::1 remote 2001:db8:3::2 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip address add 2001:db8:3::1/128 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 2001:db8:1::2/64 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:1::3/64 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 2001:db8:2::2/64 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:2::3/64 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+}
+
+switch_destroy()
+{
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 2001:db8:3::1/128 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 2001:db8:3::2 nexthop via 2001:db8:4::2
+	ip address del dev $rp1 2001:db8:4::1/64
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 2001:db8:4::2/64 dev $rp2
+	ip address add 2001:db8:5::2/64 dev v1
+
+	ip route add 2001:db8:3::1/128 vrf vrf-spine nexthop via \
+		2001:db8:4::1
+	ip route add 2001:db8:3::2/128 vrf vrf-spine nexthop via \
+		2001:db8:5::1
+}
+
+spine_destroy()
+{
+	ip route del 2001:db8:3::2/128 vrf vrf-spine nexthop via \
+		2001:db8:5::1
+	ip route del 2001:db8:3::1/128 vrf vrf-spine nexthop via \
+		2001:db8:4::1
+
+	ip address del 2001:db8:5::2/64 dev v1
+	ip address del 2001:db8:4::2/64 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 2001:db8:1::4 2001:db8:1::3
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 2001:db8:2::4 2001:db8:2::3
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 2001:db8:5::1/64
+	ip route add 2001:db8:3::1 nexthop via 2001:db8:5::2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 2001:db8:3::2 remote 2001:db8:3::1 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 2001:db8:3::2 remote 2001:db8:3::1 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 2001:db8:3::2/128 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 2001:db8:1::3/64 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:1::3/64 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 2001:db8:2::3/64 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:2::3/64 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+macs_populate()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f macs_populate
+
+macs_initialize()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	macs_populate $h1_ns_mac $h2_ns_mac 2001:db8:1::4 2001:db8:2::4 \
+		2001:db8:3::2
+	in_ns ns1 macs_populate $h1_mac $h2_mac 2001:db8:1::1 2001:db8:2::1 \
+		2001:db8:3::1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+	in_ns ns1 forwarding_enable
+
+	macs_initialize
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::1 ": local->local vid 10->vid 20"
+	ping6_test $h1 2001:db8:1::4 ": local->remote vid 10->vid 10"
+	ping6_test $h2 2001:db8:2::4 ": local->remote vid 20->vid 20"
+	ping6_test $h1 2001:db8:2::4 ": local->remote vid 10->vid 20"
+	ping6_test $h2 2001:db8:1::4 ": local->remote vid 20->vid 10"
+}
+
+arp_decap()
+{
+	# Repeat the ping tests, but without populating the neighbours. This
+	# makes sure we correctly decapsulate ARP packets
+	log_info "deleting neighbours from vlan interfaces"
+
+	ip neigh del 2001:db8:1::4 dev vlan10
+	ip neigh del 2001:db8:2::4 dev vlan20
+
+	ping_ipv6
+
+	ip neigh replace 2001:db8:1::4 lladdr $(in_ns ns1 mac_get w2) \
+		nud noarp dev vlan10 extern_learn
+	ip neigh replace 2001:db8:2::4 lladdr $(in_ns ns1 mac_get w4) \
+		nud noarp dev vlan20 extern_learn
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
new file mode 100755
index 0000000000..eb307ca37b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
@@ -0,0 +1,797 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                               +----------------------+
+# | H1 (vrf)           |                               |             H2 (vrf) |
+# |    + $h1           |                               |  + $h2               |
+# |    | 192.0.2.1/28  |                               |  | 192.0.2.2/28      |
+# +----|---------------+                               +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1d)             + $swp2           | |
+# | |                                                                       | |
+# | |  + vx1 (vxlan)                                                        | |
+# | |    local 192.0.2.17                                                   | |
+# | |    remote 192.0.2.34 192.0.2.50                                       | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                  BR2 (802.1d) | |   | |                  BR2 (802.1d) | |
+# | |  + vx2 (vxlan)                | |   | |  + vx2 (vxlan)                | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |    192.0.2.3/28               | |   | |    192.0.2.4/28               | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_ttl
+	test_tos
+	test_ecn_encap
+	test_ecn_decap
+	reapply_config
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_learning
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx1 type vxlan id 1000		\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx1 up
+
+	ip link set dev vx1 master br1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx1 nomaster
+	ip link set dev vx1 down
+	ip link del dev vx1
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	ip link add name vx2 type vxlan id 1000 local $in_addr dstport "$VXPORT"
+	ip link set dev vx2 up
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx2 master br2
+	tc qdisc add dev vx2 clsact
+
+	simple_if_init w2 $host_addr/28
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx1 is the first device to get attached to the
+# bridge, and that at the point that the local IP is already configured. Try the
+# other scenario of attaching the device to an already-offloaded bridge, and
+# only then attach the local IP.
+reapply_config()
+{
+	echo "Reapplying configuration"
+
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	rp1_unset_addr
+	ip link set dev vx1 nomaster
+	sleep 5
+
+	ip link set dev vx1 master br1
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	sleep 1
+	rp1_set_addr
+	sleep 5
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2 ": local->local"
+	ping_test $h1 192.0.2.3 ": local->remote 1"
+	ping_test $h1 192.0.2.4 ": local->remote 2"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx2 ns1" "vx2 ns2")
+	local counter
+	local key
+
+	for counter in "${counters[@]}"; do
+		flood_counter_install $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ $h1 -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $counter
+	done
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 192.0.2.100 "flood"
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx1 192.0.2.34"
+			  "$r2_mac vx1 192.0.2.50")
+	local target
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add $target
+	done
+
+	__test_unicast $h2_mac 192.0.2.2 0 "local MAC unicast"
+	__test_unicast $r1_mac 192.0.2.3 1 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 192.0.2.4 2 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del $target
+	done
+}
+
+vxlan_ping_test()
+{
+	local ping_dev=$1; shift
+	local ping_dip=$1; shift
+	local ping_args=$1; shift
+	local capture_dev=$1; shift
+	local capture_dir=$1; shift
+	local capture_pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	ping_do $ping_dev $ping_dip "$ping_args"
+	local t1=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "$capture_dev: Expected to capture $expect packets, got $delta."
+}
+
+test_ttl()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_ttl 99 action pass
+	vxlan_ping_test $h1 192.0.2.3 "" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: envelope TTL"
+}
+
+test_tos()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_tos 0x14 action pass
+	vxlan_ping_test $h1 192.0.2.3 "-Q 0x14" v1 egress 77 10
+	vxlan_ping_test $h1 192.0.2.3 "-Q 0x18" v1 egress 77 0
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: envelope TOS inheritance"
+}
+
+__test_ecn_encap()
+{
+	local q=$1; shift
+	local tos=$1; shift
+
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_tos $tos action pass
+	sleep 1
+	vxlan_ping_test $h1 192.0.2.3 "-Q $q" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: ECN encap: $q->$tos"
+}
+
+test_ecn_encap()
+{
+	# In accordance with INET_ECN_encapsulate()
+	__test_ecn_encap 0x00 0x00
+	__test_ecn_encap 0x01 0x01
+	__test_ecn_encap 0x02 0x02
+	__test_ecn_encap 0x03 0x02
+}
+
+vxlan_encapped_ping_do()
+{
+	local count=$1; shift
+	local dev=$1; shift
+	local next_hop_mac=$1; shift
+	local dest_ip=$1; shift
+	local dest_mac=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+
+	$MZ $dev -c $count -d 100msec -q \
+		-b $next_hop_mac -B $dest_ip \
+		-t udp tos=$outer_tos,sp=23456,dp=$VXPORT,p=$(:
+		    )"08:"$(                      : VXLAN flags
+		    )"00:00:00:"$(                : VXLAN reserved
+		    )"00:03:e8:"$(                : VXLAN VNI
+		    )"00:"$(                      : VXLAN reserved
+		    )"$dest_mac:"$(               : ETH daddr
+		    )"$(mac_get w2):"$(           : ETH saddr
+		    )"08:00:"$(                   : ETH type
+		    )"45:"$(                      : IP version + IHL
+		    )"$inner_tos:"$(              : IP TOS
+		    )"00:54:"$(                   : IP total length
+		    )"99:83:"$(                   : IP identification
+		    )"40:00:"$(                   : IP flags + frag off
+		    )"40:"$(                      : IP TTL
+		    )"01:"$(                      : IP proto
+		    )"00:00:"$(                   : IP header csum
+		    )"c0:00:02:03:"$(             : IP saddr: 192.0.2.3
+		    )"c0:00:02:01:"$(             : IP daddr: 192.0.2.1
+		    )"08:"$(                      : ICMP type
+		    )"00:"$(                      : ICMP code
+		    )"8b:f2:"$(                   : ICMP csum
+		    )"1f:6a:"$(                   : ICMP request identifier
+		    )"00:01:"$(                   : ICMP request sequence number
+		    )"4f:ff:c5:5b:00:00:00:00:"$( : ICMP payload
+		    )"6d:74:0b:00:00:00:00:00:"$( :
+		    )"10:11:12:13:14:15:16:17:"$( :
+		    )"18:19:1a:1b:1c:1d:1e:1f:"$( :
+		    )"20:21:22:23:24:25:26:27:"$( :
+		    )"28:29:2a:2b:2c:2d:2e:2f:"$( :
+		    )"30:31:32:33:34:35:36:37"
+}
+export -f vxlan_encapped_ping_do
+
+vxlan_encapped_ping_test()
+{
+	local ping_dev=$1; shift
+	local nh_dev=$1; shift
+	local ping_dip=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+	local stat_get=$1; shift
+	local expect=$1; shift
+
+	local t0=$($stat_get)
+
+	in_ns ns1 \
+		vxlan_encapped_ping_do 10 $ping_dev $(mac_get $nh_dev) \
+			$ping_dip $(mac_get $h1) \
+			$inner_tos $outer_tos
+
+	local t1=$($stat_get)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}
+export -f vxlan_encapped_ping_test
+
+__test_ecn_decap()
+{
+	local orig_inner_tos=$1; shift
+	local orig_outer_tos=$1; shift
+	local decapped_tos=$1; shift
+
+	RET=0
+
+	tc filter add dev $h1 ingress pref 77 prot ip \
+		flower ip_tos $decapped_tos action drop
+	sleep 1
+	vxlan_encapped_ping_test v2 v1 192.0.2.17 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "tc_rule_stats_get $h1 77 ingress" 10
+	tc filter del dev $h1 ingress pref 77
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->$decapped_tos"
+}
+
+test_ecn_decap_error()
+{
+	local orig_inner_tos=00
+	local orig_outer_tos=03
+
+	RET=0
+
+	vxlan_encapped_ping_test v2 v1 192.0.2.17 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "link_stats_rx_errors_get vx1" 10
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->error"
+}
+
+test_ecn_decap()
+{
+	# In accordance with INET_ECN_decapsulate()
+	__test_ecn_decap 00 00 0x00
+	__test_ecn_decap 00 01 0x00
+	__test_ecn_decap 00 02 0x00
+	# 00 03 is tested in test_ecn_decap_error()
+	__test_ecn_decap 01 00 0x01
+	__test_ecn_decap 01 01 0x01
+	__test_ecn_decap 01 02 0x01
+	__test_ecn_decap 01 03 0x03
+	__test_ecn_decap 02 00 0x02
+	__test_ecn_decap 02 01 0x01
+	__test_ecn_decap 02 02 0x02
+	__test_ecn_decap 02 03 0x03
+	__test_ecn_decap 03 00 0x03
+	__test_ecn_decap 03 01 0x03
+	__test_ecn_decap 03 02 0x03
+	__test_ecn_decap 03 03 0x03
+	test_ecn_decap_error
+}
+
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+
+	# Enable learning on the VxLAN device and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx1 type vxlan ageing 10
+	ip link set dev vx1 type vxlan learning
+	reapply_config
+
+	# Check that flooding works
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in VxLAN device vx1
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev vx1 $mac master self
+	sleep 1
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	sleep 20
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev vx1 type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	ip link set dev vx1 type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+
+	# Restore previous settings
+	ip link set dev vx1 type vxlan nolearning
+	ip link set dev vx1 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
new file mode 100755
index 0000000000..ac97f07e5c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
@@ -0,0 +1,804 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |    + $h1              |                          |    + $h2               |
+# |    | 192.0.2.1/28     |                          |    | 192.0.2.2/28      |
+# |    | 2001:db8:1::1/64 |                          |    | 2001:db8:1::2/64  |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1d)             + $swp2           | |
+# | |                                                                       | |
+# | |  + vx1 (vxlan)                                                        | |
+# | |    local 2001:db8:3::1                                                | |
+# | |    remote 2001:db8:4::1 2001:db8:5::1                                 | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  2001:db8:4::0/64 via 2001:db8:3::2                                       |
+# |  2001:db8:5::0/64 via 2001:db8:3::2                                       |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 2001:db8:3::1/64                                                     |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------+
+# |    |                                             VRP2 (vrf)   |
+# |    + $rp2                                                     |
+# |      2001:db8:3::2/64                                         |
+# |                                                               |  (maybe) HW
+# =============================================================================
+# |                                                               |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)        |
+# |    | 2001:db8:4::2/64                      | 2001:db8:5::2/64 |
+# +----|---------------------------------------|------------------+
+#      |                                       |
+# +----|--------------------------------+ +----|-------------------------------+
+# |    + v2 (veth)        NS1 (netns)   | |    + v4 (veth)        NS2 (netns)  |
+# |      2001:db8:4::1/64               | |      2001:db8:5::1/64              |
+# |                                     | |                                    |
+# | 2001:db8:3::0/64 via 2001:db8:4::2  | | 2001:db8:3::0/64 via 2001:db8:5::2 |
+# | 2001:db8:5::1/128 via 2001:db8:4::2 | | 2001:db8:4::1/128 via              |
+# |                                     | |         2001:db8:5::2              |
+# |                                     | |                                    |
+# | +-------------------------------+   | | +-------------------------------+  |
+# | |                  BR2 (802.1d) |   | | |                  BR2 (802.1d) |  |
+# | |  + vx2 (vxlan)                |   | | |  + vx2 (vxlan)                |  |
+# | |    local 2001:db8:4::1        |   | | |    local 2001:db8:5::1        |  |
+# | |    remote 2001:db8:3::1       |   | | |    remote 2001:db8:3::1       |  |
+# | |    remote 2001:db8:5::1       |   | | |    remote 2001:db8:4::1       |  |
+# | |    id 1000 dstport $VXPORT    |   | | |    id 1000 dstport $VXPORT    |  |
+# | |                               |   | | |                               |  |
+# | |  + w1 (veth)                  |   | | |  + w1 (veth)                  |  |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# |    |                                | |    |                               |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# | |  + w2 (veth)        VW2 (vrf) |   | | |  + w2 (veth)        VW2 (vrf) |  |
+# | |    192.0.2.3/28               |   | | |    192.0.2.4/28               |  |
+# | |    2001:db8:1::3/64           |   | | |    2001:db8:1::4/64           |  |
+# | +-------------------------------+   | | +-------------------------------+  |
+# +-------------------------------------+ +------------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	ping_ipv6
+	test_flood
+	test_unicast
+	test_ttl
+	test_tos
+	test_ecn_encap
+	test_ecn_decap
+	reapply_config
+	ping_ipv4
+	ping_ipv6
+	test_flood
+	test_unicast
+"}
+
+NUM_NETIFS=6
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 2001:db8:3::1/64
+
+	ip route add 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+	ip route add 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+}
+
+rp1_unset_addr()
+{
+	ip route del 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+	ip route del 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+
+	ip address del dev $rp1 2001:db8:3::1/64
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+	tc qdisc add dev $rp1 clsact
+
+	ip link add name vx1 type vxlan id 1000	local 2001:db8:3::1 \
+		dstport "$VXPORT" nolearning udp6zerocsumrx udp6zerocsumtx \
+		tos inherit ttl 100
+	ip link set dev vx1 up
+
+	ip link set dev vx1 master br1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 2001:db8:5::1 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev vx1 nomaster
+	ip link set dev vx1 down
+	ip link del dev vx1
+
+	tc qdisc del dev $rp1 clsact
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 2001:db8:3::2/64
+	__simple_if_init v1 v$rp2 2001:db8:4::2/64
+	__simple_if_init v3 v$rp2 2001:db8:5::2/64
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 2001:db8:5::2/64
+	__simple_if_fini v1 2001:db8:4::2/64
+	simple_if_fini $rp2 2001:db8:3::2/64
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr_ipv4=$1; shift
+	local host_addr_ipv6=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/64
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	ip link add name vx2 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT" udp6zerocsumrx
+	ip link set dev vx2 up
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst 2001:db8:3::1 self
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx2 master br2
+	tc qdisc add dev vx2 clsact
+
+	simple_if_init w2 $host_addr_ipv4/28 $host_addr_ipv6/64
+
+	ip route add 2001:db8:3::0/64 nexthop via $nh_addr
+	ip route add $other_in_addr/128 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 2001:db8:4::1 2001:db8:5::1 2001:db8:4::2 \
+	      192.0.2.3 2001:db8:1::3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 2001:db8:5::1 2001:db8:4::1 2001:db8:5::2 \
+	      192.0.2.4 2001:db8:1::4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx1 is the first device to get
+# attached to the bridge, and at that point the local IP is already
+# configured. Try the other scenario of attaching the devices to a an
+# already-offloaded bridge, and only then assign the local IP.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	ip link set dev vx1 nomaster
+	rp1_unset_addr
+	sleep 5
+
+	ip link set dev vx1 master br1
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	sleep 1
+	rp1_set_addr
+	sleep 5
+}
+
+__ping_ipv4()
+{
+	local vxlan_local_ip=$1; shift
+	local vxlan_remote_ip=$1; shift
+	local src_ip=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local info=$1; shift
+
+	RET=0
+
+	tc filter add dev $rp1 egress protocol ipv6 pref 1 handle 101 \
+		flower ip_proto udp src_ip $vxlan_local_ip \
+		dst_ip $vxlan_remote_ip dst_port $VXPORT $TC_FLAG action pass
+	# Match ICMP-reply packets after decapsulation, so source IP is
+	# destination IP of the ping and destination IP is source IP of the
+	# ping.
+	tc filter add dev $swp1 egress protocol ip pref 1 handle 101 \
+		flower src_ip $dst_ip dst_ip $src_ip \
+		$TC_FLAG action pass
+
+	# Send 100 packets and verify that at least 100 packets hit the rule,
+	# to overcome ARP noise.
+	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	check_err $? "Ping failed"
+
+	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
+	check_err $? "Encapsulated packets did not go through router"
+
+	tc_check_at_least_x_packets "dev $swp1 egress" 101 10 100
+	check_err $? "Decapsulated packets did not go through switch"
+
+	log_test "ping: $info"
+
+	tc filter del dev $swp1 egress
+	tc filter del dev $rp1 egress
+}
+
+ping_ipv4()
+{
+	RET=0
+
+	local local_sw_ip=2001:db8:3::1
+	local remote_ns1_ip=2001:db8:4::1
+	local remote_ns2_ip=2001:db8:5::1
+	local h1_ip=192.0.2.1
+	local w2_ns1_ip=192.0.2.3
+	local w2_ns2_ip=192.0.2.4
+
+	ping_test $h1 192.0.2.2 ": local->local"
+
+	__ping_ipv4 $local_sw_ip $remote_ns1_ip $h1_ip $w2_ns1_ip $h1 \
+		"local->remote 1"
+	__ping_ipv4 $local_sw_ip $remote_ns2_ip $h1_ip $w2_ns2_ip $h1 \
+		"local->remote 2"
+}
+
+__ping_ipv6()
+{
+	local vxlan_local_ip=$1; shift
+	local vxlan_remote_ip=$1; shift
+	local src_ip=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local info=$1; shift
+
+	RET=0
+
+	tc filter add dev $rp1 egress protocol ipv6 pref 1 handle 101 \
+		flower ip_proto udp src_ip $vxlan_local_ip \
+		dst_ip $vxlan_remote_ip dst_port $VXPORT $TC_FLAG action pass
+	# Match ICMP-reply packets after decapsulation, so source IP is
+	# destination IP of the ping and destination IP is source IP of the
+	# ping.
+	tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \
+		flower src_ip $dst_ip dst_ip $src_ip $TC_FLAG action pass
+
+	# Send 100 packets and verify that at least 100 packets hit the rule,
+	# to overcome neighbor discovery noise.
+	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	check_err $? "Ping failed"
+
+	tc_check_at_least_x_packets "dev $rp1 egress" 101 100
+	check_err $? "Encapsulated packets did not go through router"
+
+	tc_check_at_least_x_packets "dev $swp1 egress" 101 100
+	check_err $? "Decapsulated packets did not go through switch"
+
+	log_test "ping6: $info"
+
+	tc filter del dev $swp1 egress
+	tc filter del dev $rp1 egress
+}
+
+ping_ipv6()
+{
+	RET=0
+
+	local local_sw_ip=2001:db8:3::1
+	local remote_ns1_ip=2001:db8:4::1
+	local remote_ns2_ip=2001:db8:5::1
+	local h1_ip=2001:db8:1::1
+	local w2_ns1_ip=2001:db8:1::3
+	local w2_ns2_ip=2001:db8:1::4
+
+	ping6_test $h1 2001:db8:1::2 ": local->local"
+
+	__ping_ipv6 $local_sw_ip $remote_ns1_ip $h1_ip $w2_ns1_ip $h1 \
+		"local->remote 1"
+	__ping_ipv6 $local_sw_ip $remote_ns2_ip $h1_ip $w2_ns2_ip $h1 \
+		"local->remote 2"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) tc filter $add_del dev "$dev" ingress \
+	   proto ipv6 pref 100 flower dst_ip $dst_ip ip_proto \
+	   icmpv6 skip_sw action pass 2>/dev/null || \
+	$(maybe_in_ns $ns) tc filter $add_del dev "$dev" ingress \
+	   proto ipv6 pref 100 flower dst_ip $dst_ip ip_proto \
+	   icmpv6 skip_hw action pass
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx2 ns1" "vx2 ns2")
+	local counter
+	local key
+
+	for counter in "${counters[@]}"; do
+		flood_counter_install $dst $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ -6 $h1 -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp6 type=128 -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $dst $counter
+	done
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 2001:db8:1::100 "flood"
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx1 2001:db8:4::1"
+			  "$r2_mac vx1 2001:db8:5::1")
+	local target
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add $target
+	done
+
+	__test_unicast $h2_mac 2001:db8:1::2 0 "local MAC unicast"
+	__test_unicast $r1_mac 2001:db8:1::3 1 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 2001:db8:1::4 2 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del $target
+	done
+}
+
+vxlan_ping_test()
+{
+	local ping_dev=$1; shift
+	local ping_dip=$1; shift
+	local ping_args=$1; shift
+	local capture_dev=$1; shift
+	local capture_dir=$1; shift
+	local capture_pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	ping6_do $ping_dev $ping_dip "$ping_args"
+	local t1=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "$capture_dev: Expected to capture $expect packets, got $delta."
+}
+
+test_ttl()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 protocol ipv6 \
+		flower ip_ttl 99 action pass
+	vxlan_ping_test $h1 2001:db8:1::3 "" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 protocol ipv6
+
+	log_test "VXLAN: envelope TTL"
+}
+
+test_tos()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 protocol ipv6 \
+		flower ip_tos 0x14 action pass
+	vxlan_ping_test $h1 2001:db8:1::3 "-Q 0x14" v1 egress 77 10
+	vxlan_ping_test $h1 2001:db8:1::3 "-Q 0x18" v1 egress 77 0
+	tc filter del dev v1 egress pref 77 protocol ipv6
+
+	log_test "VXLAN: envelope TOS inheritance"
+}
+
+__test_ecn_encap()
+{
+	local q=$1; shift
+	local tos=$1; shift
+
+	RET=0
+
+	tc filter add dev v1 egress pref 77 protocol ipv6 \
+		flower ip_tos $tos action pass
+	sleep 1
+	vxlan_ping_test $h1 2001:db8:1::3 "-Q $q" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 protocol ipv6
+
+	log_test "VXLAN: ECN encap: $q->$tos"
+}
+
+test_ecn_encap()
+{
+	# In accordance with INET_ECN_encapsulate()
+	__test_ecn_encap 0x00 0x00
+	__test_ecn_encap 0x01 0x01
+	__test_ecn_encap 0x02 0x02
+	__test_ecn_encap 0x03 0x02
+}
+
+vxlan_encapped_ping_do()
+{
+	local count=$1; shift
+	local dev=$1; shift
+	local next_hop_mac=$1; shift
+	local dest_ip=$1; shift
+	local dest_mac=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+	local saddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:03"
+	local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01"
+
+	$MZ -6 $dev -c $count -d 100msec -q \
+		-b $next_hop_mac -B $dest_ip \
+		-t udp tos=$outer_tos,sp=23456,dp=$VXPORT,p=$(:
+		    )"08:"$(                      : VXLAN flags
+		    )"00:00:00:"$(                : VXLAN reserved
+		    )"00:03:e8:"$(                : VXLAN VNI
+		    )"00:"$(                      : VXLAN reserved
+		    )"$dest_mac:"$(               : ETH daddr
+		    )"$(mac_get w2):"$(           : ETH saddr
+		    )"86:dd:"$(                   : ETH type
+		    )"6"$(			  : IP version
+		    )"$inner_tos"$(               : Traffic class
+		    )"0:00:00:"$(                 : Flow label
+		    )"00:08:"$(                   : Payload length
+		    )"3a:"$(                      : Next header
+		    )"04:"$(                      : Hop limit
+		    )"$saddr:"$(		  : IP saddr
+		    )"$daddr:"$(		  : IP daddr
+		    )"80:"$(			  : ICMPv6.type
+		    )"00:"$(			  : ICMPv6.code
+		    )"00:"$(			  : ICMPv6.checksum
+		    )
+}
+export -f vxlan_encapped_ping_do
+
+vxlan_encapped_ping_test()
+{
+	local ping_dev=$1; shift
+	local nh_dev=$1; shift
+	local ping_dip=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+	local stat_get=$1; shift
+	local expect=$1; shift
+
+	local t0=$($stat_get)
+
+	in_ns ns1 \
+		vxlan_encapped_ping_do 10 $ping_dev $(mac_get $nh_dev) \
+			$ping_dip $(mac_get $h1) \
+			$inner_tos $outer_tos
+	sleep 1
+	local t1=$($stat_get)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}
+export -f vxlan_encapped_ping_test
+
+__test_ecn_decap()
+{
+	local orig_inner_tos=$1; shift
+	local orig_outer_tos=$1; shift
+	local decapped_tos=$1; shift
+
+	RET=0
+
+	tc filter add dev $h1 ingress pref 77 protocol ipv6 \
+		flower src_ip 2001:db8:1::3 dst_ip 2001:db8:1::1 \
+		ip_tos $decapped_tos action drop
+	sleep 1
+	vxlan_encapped_ping_test v2 v1 2001:db8:3::1 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "tc_rule_stats_get $h1 77 ingress" 10
+	tc filter del dev $h1 ingress pref 77
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->$decapped_tos"
+}
+
+test_ecn_decap_error()
+{
+	local orig_inner_tos="0:0"
+	local orig_outer_tos=03
+
+	RET=0
+
+	vxlan_encapped_ping_test v2 v1 2001:db8:3::1 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "link_stats_rx_errors_get vx1" 10
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->error"
+}
+
+test_ecn_decap()
+{
+	# In accordance with INET_ECN_decapsulate()
+	__test_ecn_decap "0:0" 00 0x00
+	__test_ecn_decap "0:0" 01 0x00
+	__test_ecn_decap "0:0" 02 0x00
+	# 00 03 is tested in test_ecn_decap_error()
+	__test_ecn_decap "0:1" 00 0x01
+	__test_ecn_decap "0:1" 01 0x01
+	__test_ecn_decap "0:1" 02 0x01
+	__test_ecn_decap "0:1" 03 0x03
+	__test_ecn_decap "0:2" 00 0x02
+	__test_ecn_decap "0:2" 01 0x01
+	__test_ecn_decap "0:2" 02 0x02
+	__test_ecn_decap "0:2" 03 0x03
+	__test_ecn_decap "0:3" 00 0x03
+	__test_ecn_decap "0:3" 01 0x03
+	__test_ecn_decap "0:3" 02 0x03
+	__test_ecn_decap "0:3" 03 0x03
+	test_ecn_decap_error
+}
+
+test_all()
+{
+	log_info "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh
new file mode 100755
index 0000000000..3bf3da6919
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+"
+source vxlan_bridge_1d.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472_ipv6.sh
new file mode 100755
index 0000000000..0054031773
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472_ipv6.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+source vxlan_bridge_1d_ipv6.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
new file mode 100755
index 0000000000..a596bbf3ed
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
@@ -0,0 +1,840 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | |  + vx10 (vxlan)                        + vx20 (vxlan)                 | |
+# | |    local 192.0.2.17                      local 192.0.2.17             | |
+# | |    remote 192.0.2.34 192.0.2.50          remote 192.0.2.34 192.0.2.50 | |
+# | |    id 1000 dstport $VXPORT               id 2000 dstport $VXPORT      | |
+# | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                  BR2 (802.1q) | |   | |                  BR2 (802.1q) | |
+# | |  + vx10 (vxlan)               | |   | |  + vx10 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |    vid 10 pvid untagged       | |   | |    vid 10 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + vx20 (vxlan)               | |   | |  + vx20 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 2000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
+# | |    vid 20 pvid untagged       | |   | |    vid 20 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 10                     | |   | |  | vid 10                     | |
+# | |  | vid 20                     | |   | |  | vid 20                     | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  + w2 (veth)        VW2 (vrf) | |   | |  + w2 (veth)        VW2 (vrf) | |
+# | |  |\                           | |   | |  |\                           | |
+# | |  | + w2.10                    | |   | |  | + w2.10                    | |
+# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.20                      | |   | |  + w2.20                      | |
+# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	test_flood
+	test_unicast
+	reapply_config
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_learning
+	test_pvid
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+	vlan_create $h1 20 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx10 type vxlan id 1000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	bridge vlan add vid 10 dev w1
+	bridge vlan add vid 20 dev w1
+
+	ip link add name vx10 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx10 up
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx10 master br2
+	tc qdisc add dev vx10 clsact
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx20 up
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx20 master br2
+	tc qdisc add dev vx20 clsact
+
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/28
+        vlan_create w2 20 vw2 $host_addr2/24
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3 \
+	      198.51.100.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4 \
+	      198.51.100.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx10 and vx20 were the first devices to get
+# attached to the bridge, and that at the point that the local IP is already
+# configured. Try the other scenario of attaching these devices to a bridge
+# that already has local ports members, and only then assign the local IP.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx20 nomaster
+	ip link set dev vx10 nomaster
+
+	rp1_unset_addr
+	sleep 5
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	rp1_set_addr
+	sleep 5
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
+	ping_test $h1.20 198.51.100.2 ": local->local vid 20"
+	ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10"
+	ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10"
+	ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20"
+	ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
+	local counter
+	local key
+
+	# Packets reach the local host tagged whereas they reach the VxLAN
+	# devices untagged. In order to be able to use the same filter for
+	# all counters, make sure the packets also reach the local host
+	# untagged
+	bridge vlan add vid $vid dev $swp2 untagged
+	for counter in "${counters[@]}"; do
+		flood_counter_install $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $counter
+	done
+	bridge vlan add vid $vid dev $swp2
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+	local -a expects=("${@}")
+
+	RET=0
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \
+		10 10 0 10 0
+	__test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \
+		10 0 10 0 10
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local vid=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx10 192.0.2.34"
+			  "$r2_mac vx10 192.0.2.50")
+	local target
+
+	log_info "unicast vlan 10"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 10 $target
+	done
+
+	__test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast"
+	__test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 10 $target
+	done
+
+	log_info "unicast vlan 20"
+
+	targets=("$h2_mac $h2" "$r1_mac vx20 192.0.2.34" \
+		 "$r2_mac vx20 192.0.2.50")
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 20 $target
+	done
+
+	__test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast"
+	__test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 20 $target
+	done
+}
+
+test_pvid()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+	local vid=10
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before pvid off"
+
+	# Toggle PVID off and test that flood to remote hosts does not work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid off"
+
+	# Toggle PVID on and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid on"
+
+	# Add a new VLAN and test that it does not affect flooding
+	RET=0
+
+	bridge vlan add vid 30 dev vx10
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	bridge vlan del vid 30 dev vx10
+
+	log_test "VXLAN: flood after vlan add"
+
+	# Remove currently mapped VLAN and test that flood to remote hosts does
+	# not work
+	RET=0
+
+	bridge vlan del vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan delete"
+
+	# Re-add the VLAN and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan re-add"
+}
+
+__test_learning()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local idx1=$1; shift
+	local idx2=$1; shift
+	local vx=vx$vid
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in the VxLAN device
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev $vx $mac master self vlan $vid
+	sleep 1
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	sleep 20
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev $vx type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	ip link set dev $vx type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+}
+
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+	local vid=10
+
+	# Enable learning on the VxLAN devices and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx10 type vxlan ageing 10
+	ip link set dev vx10 type vxlan learning
+	ip link set dev vx20 type vxlan ageing 10
+	ip link set dev vx20 type vxlan learning
+	reapply_config
+
+	log_info "learning vlan 10"
+
+	__test_learning $mac $dst $vid 1 3
+
+	log_info "learning vlan 20"
+
+	mac=ca:fe:be:ef:13:37
+	dst=198.51.100.100
+	vid=20
+
+	__test_learning $mac $dst $vid 2 4
+
+	# Restore previous settings
+	ip link set dev vx20 type vxlan nolearning
+	ip link set dev vx20 type vxlan ageing 300
+	ip link set dev vx10 type vxlan nolearning
+	ip link set dev vx10 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
+test_all()
+{
+	log_info "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
new file mode 100755
index 0000000000..d880df89bc
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
@@ -0,0 +1,837 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# | + $h1.10              |                          | + $h2.10               |
+# | | 192.0.2.1/28        |                          | | 192.0.2.2/28         |
+# | | 2001:db8:1::1/64    |                          | | 2001:db8:1::2/64     |
+# | |                     |                          | |                      |
+# | |  + $h1.20           |                          | |  + $h2.20            |
+# | \  | 198.51.100.1/24  |                          | \  | 198.51.100.2/24   |
+# |  \ | 2001:db8:2::1/64 |                          |  \ | 2001:db8:2::2/64  |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | |  + vx10 (vxlan)                        + vx20 (vxlan)                 | |
+# | |    local:                                local:                       | |
+# | |    2001:db8:3::1                         2001:db8:3::1                | |
+# | |    remote:                               remote:                      | |
+# | |    2001:db8:4::1 2001:db8:5::1           2001:db8:4::1 2001:db8:5::1  | |
+# | |    id 1000 dstport $VXPORT               id 2000 dstport $VXPORT      | |
+# | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  2001:db8:4::0/64 via 2001:db8:3::2                                       |
+# |  2001:db8:5::0/64 via 2001:db8:3::2                                       |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 2001:db8:3::1/64                                                     |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------+
+# |    |                                             VRP2 (vrf)   |
+# |    + $rp2                                                     |
+# |      2001:db8:3::2/64                                         |
+# |                                                               |  (maybe) HW
+# =============================================================================
+# |                                                               |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)        |
+# |    | 2001:db8:4::2/64                      | 2001:db8:5::2/64 |
+# +----|---------------------------------------|------------------+
+#      |                                       |
+# +----|--------------------------------+ +----|-------------------------------+
+# |    + v2 (veth)        NS1 (netns)   | |    + v4 (veth)        NS2 (netns)  |
+# |      2001:db8:4::1/64               | |      2001:db8:5::1/64              |
+# |                                     | |                                    |
+# | 2001:db8:3::0/64 via 2001:db8:4::2  | | 2001:db8:3::0/64 via 2001:db8:5::2 |
+# | 2001:db8:5::1/128 via 2001:db8:4::2 | | 2001:db8:4::1/128 via              |
+# |                                     | |         2001:db8:5::2              |
+# |                                     | |                                    |
+# | +-------------------------------+   | | +-------------------------------+  |
+# | |                  BR2 (802.1q) |   | | |                  BR2 (802.1q) |  |
+# | |  + vx10 (vxlan)               |   | | |  + vx10 (vxlan)               |  |
+# | |    local 2001:db8:4::1        |   | | |    local 2001:db8:5::1        |  |
+# | |    remote 2001:db8:3::1       |   | | |    remote 2001:db8:3::1       |  |
+# | |    remote 2001:db8:5::1       |   | | |    remote 2001:db8:4::1       |  |
+# | |    id 1000 dstport $VXPORT    |   | | |    id 1000 dstport $VXPORT    |  |
+# | |    vid 10 pvid untagged       |   | | |    vid 10 pvid untagged       |  |
+# | |                               |   | | |                               |  |
+# | |  + vx20 (vxlan)               |   | | |  + vx20 (vxlan)               |  |
+# | |    local 2001:db8:4::1        |   | | |    local 2001:db8:5::1        |  |
+# | |    remote 2001:db8:3::1       |   | | |    remote 2001:db8:3::1       |  |
+# | |    remote 2001:db8:5::1       |   | | |    remote 2001:db8:4::1       |  |
+# | |    id 2000 dstport $VXPORT    |   | | |    id 2000 dstport $VXPORT    |  |
+# | |    vid 20 pvid untagged       |   | | |    vid 20 pvid untagged       |  |
+# | |                               |   | | |                               |  |
+# | |  + w1 (veth)                  |   | | |  + w1 (veth)                  |  |
+# | |  | vid 10                     |   | | |  | vid 10                     |  |
+# | |  | vid 20                     |   | | |  | vid 20                     |  |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# |    |                                | |    |                               |
+# | +--|----------------------------+   | | +--|----------------------------+  |
+# | |  + w2 (veth)        VW2 (vrf) |   | | |  + w2 (veth)        VW2 (vrf) |  |
+# | |  |\                           |   | | |  |\                           |  |
+# | |  | + w2.10                    |   | | |  | + w2.10                    |  |
+# | |  |   192.0.2.3/28             |   | | |  |   192.0.2.4/28             |  |
+# | |  |   2001:db8:1::3/64         |   | | |  |   2001:db8:1::4/64         |  |
+# | |  |                            |   | | |  |                            |  |
+# | |  + w2.20                      |   | | |  + w2.20                      |  |
+# | |    198.51.100.3/24            |   | | |    198.51.100.4/24            |  |
+# | |    2001:db8:2::3/64           |   | | |    2001:db8:2::4/64           |  |
+# | +-------------------------------+   | | +-------------------------------+  |
+# +-------------------------------------+ +------------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	ping_ipv6
+	test_flood
+	test_unicast
+	reapply_config
+	ping_ipv4
+	ping_ipv6
+	test_flood
+	test_unicast
+	test_pvid
+	ping_ipv4
+	ping_ipv6
+	test_flood
+	test_pvid
+"}
+
+NUM_NETIFS=6
+source lib.sh
+source tc_common.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 20 v$h1 198.51.100.1/24 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28 2001:db8:1::2/64
+	vlan_create $h2 20 v$h2 198.51.100.2/24 2001:db8:2::2/64
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 2001:db8:3::1/64
+
+	ip route add 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+	ip route add 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+}
+
+rp1_unset_addr()
+{
+	ip route del 2001:db8:5::0/64 nexthop via 2001:db8:3::2
+	ip route del 2001:db8:4::0/64 nexthop via 2001:db8:3::2
+
+	ip address del dev $rp1 2001:db8:3::1/64
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+	tc qdisc add dev $rp1 clsact
+
+	ip link add name vx10 type vxlan id 1000 local 2001:db8:3::1 \
+		dstport "$VXPORT" nolearning udp6zerocsumrx udp6zerocsumtx \
+		tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000 local 2001:db8:3::1 \
+		dstport "$VXPORT" nolearning udp6zerocsumrx udp6zerocsumtx \
+		tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 2001:db8:5::1 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 2001:db8:5::1 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	tc qdisc del dev $rp1 clsact
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 2001:db8:3::2/64
+	__simple_if_init v1 v$rp2 2001:db8:4::2/64
+	__simple_if_init v3 v$rp2 2001:db8:5::2/64
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 2001:db8:5::2/64
+	__simple_if_fini v1 2001:db8:4::2/64
+	simple_if_fini $rp2 2001:db8:3::2/64
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1_ipv4=$1; shift
+	local host_addr1_ipv6=$1; shift
+	local host_addr2_ipv4=$1; shift
+	local host_addr2_ipv6=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/64
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	bridge vlan add vid 10 dev w1
+	bridge vlan add vid 20 dev w1
+
+	ip link add name vx10 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT" udp6zerocsumrx
+	ip link set dev vx10 up
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 2001:db8:3::1 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx10 master br2
+	tc qdisc add dev vx10 clsact
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000 local $in_addr \
+		dstport "$VXPORT" udp6zerocsumrx
+	ip link set dev vx20 up
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 2001:db8:3::1 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx20 master br2
+	tc qdisc add dev vx20 clsact
+
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1_ipv4/28 $host_addr1_ipv6/64
+        vlan_create w2 20 vw2 $host_addr2_ipv4/24 $host_addr2_ipv6/64
+
+	ip route add 2001:db8:3::0/64 nexthop via $nh_addr
+	ip route add $other_in_addr/128 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 2001:db8:4::1 2001:db8:5::1 2001:db8:4::2 \
+	      192.0.2.3 2001:db8:1::3 198.51.100.3 2001:db8:2::3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 2001:db8:5::1 2001:db8:4::1 2001:db8:5::2 \
+	      192.0.2.4 2001:db8:1::4 198.51.100.4 2001:db8:2::4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx10 and vx20 were the first devices to get
+# attached to the bridge, and at that point the local IP is already
+# configured. Try the other scenario of attaching these devices to a bridge
+# that already has local ports members, and only then assign the local IP.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 2001:db8:5::1 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 2001:db8:4::1 self
+
+	ip link set dev vx20 nomaster
+	ip link set dev vx10 nomaster
+
+	rp1_unset_addr
+	sleep 5
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 2001:db8:5::1 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 2001:db8:4::1 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 2001:db8:5::1 self
+
+	rp1_set_addr
+	sleep 5
+}
+
+__ping_ipv4()
+{
+	local vxlan_local_ip=$1; shift
+	local vxlan_remote_ip=$1; shift
+	local src_ip=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local info=$1; shift
+
+	RET=0
+
+	tc filter add dev $rp1 egress protocol ipv6 pref 1 handle 101 \
+		flower ip_proto udp src_ip $vxlan_local_ip \
+		dst_ip $vxlan_remote_ip dst_port $VXPORT $TC_FLAG action pass
+	# Match ICMP-reply packets after decapsulation, so source IP is
+	# destination IP of the ping and destination IP is source IP of the
+	# ping.
+	tc filter add dev $swp1 egress protocol 802.1q pref 1 handle 101 \
+		flower vlan_ethtype ipv4 src_ip $dst_ip dst_ip $src_ip \
+		$TC_FLAG action pass
+
+	# Send 100 packets and verify that at least 100 packets hit the rule,
+	# to overcome ARP noise.
+	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	check_err $? "Ping failed"
+
+	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
+	check_err $? "Encapsulated packets did not go through router"
+
+	tc_check_at_least_x_packets "dev $swp1 egress" 101 10 100
+	check_err $? "Decapsulated packets did not go through switch"
+
+	log_test "ping: $info"
+
+	tc filter del dev $swp1 egress
+	tc filter del dev $rp1 egress
+}
+
+ping_ipv4()
+{
+	RET=0
+
+	local local_sw_ip=2001:db8:3::1
+	local remote_ns1_ip=2001:db8:4::1
+	local remote_ns2_ip=2001:db8:5::1
+	local h1_10_ip=192.0.2.1
+	local h1_20_ip=198.51.100.1
+	local w2_10_ns1_ip=192.0.2.3
+	local w2_10_ns2_ip=192.0.2.4
+	local w2_20_ns1_ip=198.51.100.3
+	local w2_20_ns2_ip=198.51.100.4
+
+	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
+	ping_test $h1.20 198.51.100.2 ": local->local vid 20"
+
+	__ping_ipv4 $local_sw_ip $remote_ns1_ip $h1_10_ip $w2_10_ns1_ip $h1.10 \
+		"local->remote 1 vid 10"
+	__ping_ipv4 $local_sw_ip $remote_ns2_ip $h1_10_ip $w2_10_ns2_ip $h1.10 \
+		"local->remote 2 vid 10"
+	__ping_ipv4 $local_sw_ip $remote_ns1_ip $h1_20_ip $w2_20_ns1_ip $h1.20 \
+		"local->remote 1 vid 20"
+	__ping_ipv4 $local_sw_ip $remote_ns2_ip $h1_20_ip $w2_20_ns2_ip $h1.20 \
+		"local->remote 2 vid 20"
+}
+
+__ping_ipv6()
+{
+	local vxlan_local_ip=$1; shift
+	local vxlan_remote_ip=$1; shift
+	local src_ip=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local info=$1; shift
+
+	RET=0
+
+	tc filter add dev $rp1 egress protocol ipv6 pref 1 handle 101 \
+		flower ip_proto udp src_ip $vxlan_local_ip \
+		dst_ip $vxlan_remote_ip dst_port $VXPORT $TC_FLAG action pass
+	# Match ICMP-reply packets after decapsulation, so source IP is
+	# destination IP of the ping and destination IP is source IP of the
+	# ping.
+	tc filter add dev $swp1 egress protocol 802.1q pref 1 handle 101 \
+		flower vlan_ethtype ipv6 src_ip $dst_ip dst_ip $src_ip \
+		$TC_FLAG action pass
+
+	# Send 100 packets and verify that at least 100 packets hit the rule,
+	# to overcome neighbor discovery noise.
+	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	check_err $? "Ping failed"
+
+	tc_check_at_least_x_packets "dev $rp1 egress" 101 100
+	check_err $? "Encapsulated packets did not go through router"
+
+	tc_check_at_least_x_packets "dev $swp1 egress" 101 100
+	check_err $? "Decapsulated packets did not go through switch"
+
+	log_test "ping6: $info"
+
+	tc filter del dev $swp1 egress
+	tc filter del dev $rp1 egress
+}
+
+ping_ipv6()
+{
+	RET=0
+
+	local local_sw_ip=2001:db8:3::1
+	local remote_ns1_ip=2001:db8:4::1
+	local remote_ns2_ip=2001:db8:5::1
+	local h1_10_ip=2001:db8:1::1
+	local h1_20_ip=2001:db8:2::1
+	local w2_10_ns1_ip=2001:db8:1::3
+	local w2_10_ns2_ip=2001:db8:1::4
+	local w2_20_ns1_ip=2001:db8:2::3
+	local w2_20_ns2_ip=2001:db8:2::4
+
+	ping6_test $h1.10 2001:db8:1::2 ": local->local vid 10"
+	ping6_test $h1.20 2001:db8:2::2 ": local->local vid 20"
+
+	__ping_ipv6 $local_sw_ip $remote_ns1_ip $h1_10_ip $w2_10_ns1_ip $h1.10 \
+		"local->remote 1 vid 10"
+	__ping_ipv6 $local_sw_ip $remote_ns2_ip $h1_10_ip $w2_10_ns2_ip $h1.10 \
+		"local->remote 2 vid 10"
+	__ping_ipv6 $local_sw_ip $remote_ns1_ip $h1_20_ip $w2_20_ns1_ip $h1.20 \
+		"local->remote 1 vid 20"
+	__ping_ipv6 $local_sw_ip $remote_ns2_ip $h1_20_ip $w2_20_ns2_ip $h1.20 \
+		"local->remote 2 vid 20"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dst_ip=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) tc filter $add_del dev "$dev" ingress \
+	   proto ipv6 pref 100 flower dst_ip $dst_ip ip_proto \
+	   icmpv6 skip_sw action pass 2>/dev/null || \
+	$(maybe_in_ns $ns) tc filter $add_del dev "$dev" ingress \
+	   proto ipv6 pref 100 flower dst_ip $dst_ip ip_proto \
+	   icmpv6 skip_hw action pass
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
+	local counter
+	local key
+
+	# Packets reach the local host tagged whereas they reach the VxLAN
+	# devices untagged. In order to be able to use the same filter for
+	# all counters, make sure the packets also reach the local host
+	# untagged
+	bridge vlan add vid $vid dev $swp2 untagged
+	for counter in "${counters[@]}"; do
+		flood_counter_install $dst $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ -6 $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp6 type=128 -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $dst $counter
+	done
+	bridge vlan add vid $vid dev $swp2
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+	local -a expects=("${@}")
+
+	RET=0
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 2001:db8:1::100 10 "flood vlan 10" \
+		10 10 0 10 0
+	__test_flood ca:fe:be:ef:13:37 2001:db8:2::100 20 "flood vlan 20" \
+		10 0 10 0 10
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local vid=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx10 2001:db8:4::1"
+			  "$r2_mac vx10 2001:db8:5::1")
+	local target
+
+	log_info "unicast vlan 10"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 10 $target
+	done
+
+	__test_unicast $h2_mac 2001:db8:1::2 0 10 "local MAC unicast"
+	__test_unicast $r1_mac 2001:db8:1::3 1 10 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 2001:db8:1::4 3 10 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 10 $target
+	done
+
+	log_info "unicast vlan 20"
+
+	targets=("$h2_mac $h2" "$r1_mac vx20 2001:db8:4::1" \
+		 "$r2_mac vx20 2001:db8:5::1")
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 20 $target
+	done
+
+	__test_unicast $h2_mac 2001:db8:2::2 0 20 "local MAC unicast"
+	__test_unicast $r1_mac 2001:db8:2::3 2 20 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 2001:db8:2::4 4 20 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 20 $target
+	done
+}
+
+test_pvid()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=de:ad:be:ef:13:37
+	local dst=2001:db8:1::100
+	local vid=10
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before pvid off"
+
+	# Toggle PVID off and test that flood to remote hosts does not work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid off"
+
+	# Toggle PVID on and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid on"
+
+	# Add a new VLAN and test that it does not affect flooding
+	RET=0
+
+	bridge vlan add vid 30 dev vx10
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	bridge vlan del vid 30 dev vx10
+
+	log_test "VXLAN: flood after vlan add"
+
+	# Remove currently mapped VLAN and test that flood to remote hosts does
+	# not work
+	RET=0
+
+	bridge vlan del vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan delete"
+
+	# Re-add the VLAN and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan re-add"
+}
+
+test_all()
+{
+	log_info "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
new file mode 100755
index 0000000000..b1b2d1a316
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+"
+source vxlan_bridge_1q.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472_ipv6.sh
new file mode 100755
index 0000000000..344f43ccb7
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472_ipv6.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+source vxlan_bridge_1q_ipv6.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
new file mode 100755
index 0000000000..5d97fa347d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
@@ -0,0 +1,561 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------+                +------------------------------+
+# |                    vrf-h1 |                |                       vrf-h2 |
+# |    + $h1                  |                |    + $h2                     |
+# |    | 10.1.1.101/24        |                |    | 10.1.2.101/24           |
+# |    | default via 10.1.1.1 |                |    | default via 10.1.2.1    |
+# +----|----------------------+                +----|-------------------------+
+#      |                                            |
+# +----|--------------------------------------------|-------------------------+
+# | SW |                                            |                         |
+# | +--|--------------------------------------------|-----------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 10.0.0.1                               local 10.0.0.1        | |
+# | |    remote 10.0.0.2                              remote 10.0.0.2       | |
+# | |    id 1010                                      id 1020               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 10.0.0.1                          | |
+# | |                               remote 10.0.0.2                         | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10                         |                         vlan20 +  | |
+# | |  | 10.1.1.11/24                   |                   10.1.2.11/24 |  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10-v (macvlan)             +             vlan20-v (macvlan) +  | |
+# | |    10.1.1.1/24                vlan4001                 10.1.2.1/24    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 192.0.2.1/24                                10.0.0.1/32              |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      192.0.2.2/24                                           |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 192.0.3.2/24                                           |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      192.0.3.1/24                                10.0.0.2/32              |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 10.1.1.1/24                                         10.1.2.1/24 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                            vlan4001                             |  | |
+# | |  + vlan10                         +                         vlan20 +  | |
+# | |  | 10.1.1.12/24                   |                   10.1.2.12/24 |  | |
+# | |  |                                |                                |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 10.0.0.2                             local 10.0.0.2          | |
+# | |    remote 10.0.0.1                            remote 10.0.0.1         | |
+# | |    id 1010                                    id 1020                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 10.0.0.2                          | |
+# | |                               remote 10.0.0.1                         | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    10.1.1.102/24        |                |    10.1.2.102/24           | |
+# | |    default via 10.1.1.1 |                |    default via 10.1.2.1    | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+"
+NUM_NETIFS=6
+source lib.sh
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/24 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/24 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 192.0.2.1/24
+	ip route add 10.0.0.2/32 nexthop via 192.0.2.2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 10.0.0.1 dstport 4789			\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip address add 10.0.0.1/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.11/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.11/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv4.conf.all.rp_filter
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 4001 dev br1 self
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan4001
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 10.0.0.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 4001 dev vx4001
+	ip link set dev vx4001 nomaster
+
+	ip link set dev vx4001 down
+	ip link del dev vx4001
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 10.0.0.2/32 nexthop via 192.0.2.2
+	ip address del dev $rp1 192.0.2.1/24
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev v1
+
+	ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+	ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+}
+
+spine_destroy()
+{
+	ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+	ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+
+	ip address del 192.0.3.2/24 dev v1
+	ip address del 192.0.2.2/24 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 192.0.3.1/24
+	ip route add 10.0.0.1/32 nexthop via 192.0.3.2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 10.0.0.2 dstport 4789			\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 10.0.0.2/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.12/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.12/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+__l2_vni_init()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f __l2_vni_init
+
+l2_vni_init()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	__l2_vni_init $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
+	in_ns ns1 __l2_vni_init $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
+}
+
+__l3_vni_init()
+{
+	local mac=$1; shift
+	local vtep_ip=$1; shift
+	local host1_ip=$1; shift
+	local host2_ip=$1; shift
+
+	bridge fdb add $mac dev vx4001 self master extern_learn static \
+		dst $vtep_ip vlan 4001
+
+	ip neigh add $vtep_ip lladdr $mac nud noarp dev vlan4001 extern_learn
+
+	ip route add $host1_ip/32 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+	ip route add $host2_ip/32 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+}
+export -f __l3_vni_init
+
+l3_vni_init()
+{
+	local vlan4001_ns_mac=$(in_ns ns1 mac_get vlan4001)
+	local vlan4001_mac=$(mac_get vlan4001)
+
+	__l3_vni_init $vlan4001_ns_mac 10.0.0.2 10.1.1.102 10.1.2.102
+	in_ns ns1 __l3_vni_init $vlan4001_mac 10.0.0.1 10.1.1.101 10.1.2.101
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+
+	l2_vni_init
+	l3_vni_init
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
+	ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
+	ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
+	ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
+	ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_symmetric_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_symmetric_ipv6.sh
new file mode 100755
index 0000000000..904633427f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_symmetric_ipv6.sh
@@ -0,0 +1,563 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+
+# +--------------------------------+            +-----------------------------+
+# |                         vrf-h1 |            |                      vrf-h2 |
+# |    + $h1                       |            | + $h2                       |
+# |    | 2001:db8:1::1/64          |            | | 2001:db8:2::1/64          |
+# |    | default via 2001:db8:1::3 |            | | default via 2001:db8:2::3 |
+# +----|---------------------------+            +-|---------------------------+
+#      |                                          |
+# +----|------------------------------------------|---------------------------+
+# | SW |                                          |                           |
+# | +--|------------------------------------------|-------------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 2001:db8:3::1                          local 2001:db8:3::1   | |
+# | |    remote 2001:db8:3::2                         remote 2001:db8:3::2  | |
+# | |    id 1010                                      id 1020               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 2001:db8:3::1                     | |
+# | |                               remote 2001:db8:3::2                    | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10                         |                         vlan20 +  | |
+# | |  | 2001:db8:1::2/64               |               2001:db8:2::2/64 |  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10-v (macvlan)             +             vlan20-v (macvlan) +  | |
+# | |    2001:db8:1::3/64           vlan4001            2001:db8:2::3/64    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 2001:db8:4::1/64                           2001:db8:3::1             |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      2001:db8:4::2/64                                       |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 2001:db8:5::2/64                                       |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      2001:db8:5::1/64                            2001:db8:3::2/128        |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 2001:db8:1::3/64                               2001:db8:2::3/64 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                            vlan4001                             |  | |
+# | |  + vlan10                         +                         vlan20 +  | |
+# | |  | 2001:db8:1::3/64               |               2001:db8:2::3/64 |  | |
+# | |  |                                |                                |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 2001:db8:3::2                        local 2001:db8:3::2     | |
+# | |    remote 2001:db8:3::1                       remote 2001:db8:3::1    | |
+# | |    id 1010                                    id 1020                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 2001:db8:3::2                     | |
+# | |                               remote 2001:db8:3::1                    | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    2001:db8:1::4/64     |                |    2001:db8:2::4/64        | |
+# | |    default via          |                |    default via             | |
+# | |    2001:db8:1::3/64     |                |    2001:db8:2::3/64        | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+"
+NUM_NETIFS=6
+source lib.sh
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/64 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/64 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 2001:db8:1::1 2001:db8:1::3
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 2001:db8:1::1 2001:db8:1::3
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 2001:db8:2::1 2001:db8:2::3
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 2001:db8:2::1 2001:db8:2::3
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 2001:db8:4::1/64
+	ip route add 2001:db8:3::2/128 nexthop via 2001:db8:4::2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 2001:db8:3::1 remote 2001:db8:3::2 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 2001:db8:3::1 remote 2001:db8:3::2 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 2001:db8:3::1 dstport 4789			\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip address add 2001:db8:3::1/128 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 2001:db8:1::2/64 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:1::3/64 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 2001:db8:2::2/64 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:2::3/64 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+}
+
+switch_destroy()
+{
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 4001 dev br1 self
+	ip link del dev vlan4001
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 2001:db8:3::1/128 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 4001 dev vx4001
+	ip link set dev vx4001 nomaster
+
+	ip link set dev vx4001 down
+	ip link del dev vx4001
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 2001:db8:3::2 nexthop via 2001:db8:4::2
+	ip address del dev $rp1 2001:db8:4::1/64
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 2001:db8:4::2/64 dev $rp2
+	ip address add 2001:db8:5::2/64 dev v1
+
+	ip route add 2001:db8:3::1/128 vrf vrf-spine nexthop via \
+		2001:db8:4::1
+	ip route add 2001:db8:3::2/128 vrf vrf-spine nexthop via \
+		2001:db8:5::1
+}
+
+spine_destroy()
+{
+	ip route del 2001:db8:3::2/128 vrf vrf-spine nexthop via \
+		2001:db8:5::1
+	ip route del 2001:db8:3::1/128 vrf vrf-spine nexthop via \
+		2001:db8:4::1
+
+	ip address del 2001:db8:5::2/64 dev v1
+	ip address del 2001:db8:4::2/64 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 2001:db8:1::4 2001:db8:1::3
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 2001:db8:2::4 2001:db8:2::3
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 2001:db8:5::1/64
+	ip route add 2001:db8:3::1 nexthop via 2001:db8:5::2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 2001:db8:3::2 remote 2001:db8:3::1 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 2001:db8:3::2 remote 2001:db8:3::1 dstport 4789	\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 2001:db8:3::2 dstport 4789			\
+		nolearning udp6zerocsumrx udp6zerocsumtx tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 2001:db8:3::2/128 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 2001:db8:1::3/64 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:1::3/64 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 2001:db8:2::3/64 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 2001:db8:2::3/64 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+__l2_vni_init()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f __l2_vni_init
+
+l2_vni_init()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	__l2_vni_init $h1_ns_mac $h2_ns_mac 2001:db8:1::4 2001:db8:2::4 \
+	       2001:db8:3::2
+	in_ns ns1 __l2_vni_init $h1_mac $h2_mac 2001:db8:1::1 2001:db8:2::1 \
+	       2001:db8:3::1
+}
+
+__l3_vni_init()
+{
+	local mac=$1; shift
+	local vtep_ip=$1; shift
+	local host1_ip=$1; shift
+	local host2_ip=$1; shift
+
+	bridge fdb add $mac dev vx4001 self master extern_learn static \
+		dst $vtep_ip vlan 4001
+
+	ip neigh add $vtep_ip lladdr $mac nud noarp dev vlan4001 extern_learn
+
+	ip route add $host1_ip/128 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+	ip route add $host2_ip/128 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+}
+export -f __l3_vni_init
+
+l3_vni_init()
+{
+	local vlan4001_ns_mac=$(in_ns ns1 mac_get vlan4001)
+	local vlan4001_mac=$(mac_get vlan4001)
+
+	__l3_vni_init $vlan4001_ns_mac 2001:db8:3::2 2001:db8:1::4 \
+		2001:db8:2::4
+	in_ns ns1 __l3_vni_init $vlan4001_mac 2001:db8:3::1 2001:db8:1::1 \
+		2001:db8:2::1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+	in_ns ns1 forwarding_enable
+
+	l2_vni_init
+	l3_vni_init
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::1 ": local->local vid 10->vid 20"
+	ping6_test $h1 2001:db8:1::4 ": local->remote vid 10->vid 10"
+	ping6_test $h2 2001:db8:2::4 ": local->remote vid 20->vid 20"
+	ping6_test $h1 2001:db8:2::4 ": local->remote vid 10->vid 20"
+	ping6_test $h2 2001:db8:1::4 ": local->remote vid 20->vid 10"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS