Adding upstream version 6.10.4.upstream/6.10.4

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 69 insertions, 25 deletions

diff --git a/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json b/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
index 9b4a032186..7149caec4f 100644
--- a/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
+++ b/tools/perf/pmu-events/arch/riscv/andes/ax45/firmware.json
@@ -36,7 +36,7 @@
     "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
   },
   {
-    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
   },
   {
     "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
diff --git a/tools/perf/pmu-events/arch/riscv/riscv-sbi-firmware.json b/tools/perf/pmu-events/arch/riscv/riscv-sbi-firmware.json
index a9939823b1..0c9b9a2d29 100644
--- a/tools/perf/pmu-events/arch/riscv/riscv-sbi-firmware.json
+++ b/tools/perf/pmu-events/arch/riscv/riscv-sbi-firmware.json
@@ -74,7 +74,7 @@
   {
     "PublicDescription": "Sent SFENCE.VMA with ASID request to other HART event",
     "ConfigCode": "0x800000000000000c",
-    "EventName": "FW_SFENCE_VMA_RECEIVED",
+    "EventName": "FW_SFENCE_VMA_ASID_SENT",
     "BriefDescription": "Sent SFENCE.VMA with ASID request to other HART event"
   },
   {
diff --git a/tools/perf/pmu-events/arch/riscv/sifive/u74/firmware.json b/tools/perf/pmu-events/arch/riscv/sifive/u74/firmware.json
index 9b4a032186..7149caec4f 100644
--- a/tools/perf/pmu-events/arch/riscv/sifive/u74/firmware.json
+++ b/tools/perf/pmu-events/arch/riscv/sifive/u74/firmware.json
@@ -36,7 +36,7 @@
     "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
   },
   {
-    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
   },
   {
     "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
diff --git a/tools/perf/pmu-events/arch/riscv/starfive/dubhe-80/firmware.json b/tools/perf/pmu-events/arch/riscv/starfive/dubhe-80/firmware.json
index 9b4a032186..7149caec4f 100644
--- a/tools/perf/pmu-events/arch/riscv/starfive/dubhe-80/firmware.json
+++ b/tools/perf/pmu-events/arch/riscv/starfive/dubhe-80/firmware.json
@@ -36,7 +36,7 @@
     "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
   },
   {
-    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
   },
   {
     "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
diff --git a/tools/perf/pmu-events/arch/riscv/thead/c900-legacy/firmware.json b/tools/perf/pmu-events/arch/riscv/thead/c900-legacy/firmware.json
index 9b4a032186..7149caec4f 100644
--- a/tools/perf/pmu-events/arch/riscv/thead/c900-legacy/firmware.json
+++ b/tools/perf/pmu-events/arch/riscv/thead/c900-legacy/firmware.json
@@ -36,7 +36,7 @@
     "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
   },
   {
-    "ArchStdEvent": "FW_SFENCE_VMA_RECEIVED"
+    "ArchStdEvent": "FW_SFENCE_VMA_ASID_SENT"
   },
   {
     "ArchStdEvent": "FW_SFENCE_VMA_ASID_RECEIVED"
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 1730b852a9..6d075648d2 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -1141,7 +1141,7 @@ int hist_entry__append_callchain(struct hist_entry *he, struct perf_sample *samp
 int fill_callchain_info(struct addr_location *al, struct callchain_cursor_node *node,
 			bool hide_unresolved)
 {
-	struct machine *machine = maps__machine(node->ms.maps);
+	struct machine *machine = node->ms.maps ? maps__machine(node->ms.maps) : NULL;
 
 	maps__put(al->maps);
 	al->maps = maps__get(node->ms.maps);
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c
index d2043ec3bf..4209b95690 100644
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.c
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c
@@ -1115,11 +1115,11 @@ again:
 		return 1;
 	}
 
-	if (--cfg_repeat > 0) {
-		if (cfg_input)
-			close(fd);
+	if (cfg_input)
+		close(fd);
+
+	if (--cfg_repeat > 0)
 		goto again;
-	}
 
 	return 0;
 }
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 108aeeb84e..7043984b7e 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -661,7 +661,7 @@ pm_nl_check_endpoint()
 	done
 
 	if [ -z "${id}" ]; then
-		test_fail "bad test - missing endpoint id"
+		fail_test "bad test - missing endpoint id"
 		return
 	fi
 
@@ -1634,6 +1634,8 @@ chk_prio_nr()
 {
 	local mp_prio_nr_tx=$1
 	local mp_prio_nr_rx=$2
+	local mpj_syn=$3
+	local mpj_syn_ack=$4
 	local count
 
 	print_check "ptx"
@@ -1655,6 +1657,26 @@ chk_prio_nr()
 	else
 		print_ok
 	fi
+
+	print_check "syn backup"
+	count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn" ]; then
+		fail_test "got $count JOIN[s] syn with Backup expected $mpj_syn"
+	else
+		print_ok
+	fi
+
+	print_check "synack backup"
+	count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckBackupRx")
+	if [ -z "$count" ]; then
+		print_skip
+	elif [ "$count" != "$mpj_syn_ack" ]; then
+		fail_test "got $count JOIN[s] synack with Backup expected $mpj_syn_ack"
+	else
+		print_ok
+	fi
 }
 
 chk_subflow_nr()
@@ -2612,33 +2634,46 @@ backup_tests()
 		sflags=nobackup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 	fi
 
 	# single address, backup
 	if reset "single address, backup" &&
 	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup
+		pm_nl_set_limits $ns2 1 1
+		sflags=nobackup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
+		chk_join_nr 1 1 1
+		chk_add_nr 1 1
+		chk_prio_nr 1 0 0 1
+	fi
+
+	# single address, switch to backup
+	if reset "single address, switch to backup" &&
+	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
+		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 
 	# single address with port, backup
 	if reset "single address with port, backup" &&
 	   continue_if mptcp_lib_kallsyms_has "subflow_rebuild_header$"; then
 		pm_nl_set_limits $ns1 0 1
-		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal,backup port 10100
 		pm_nl_set_limits $ns2 1 1
-		sflags=backup speed=slow \
+		sflags=nobackup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
-		chk_prio_nr 1 1
+		chk_prio_nr 1 0 0 1
 	fi
 
 	if reset "mpc backup" &&
@@ -2647,17 +2682,26 @@ backup_tests()
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc backup both sides" &&
 	   continue_if mptcp_lib_kallsyms_doesnt_have "T mptcp_subflow_send_ack$"; then
-		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
+		pm_nl_set_limits $ns1 0 2
+		pm_nl_set_limits $ns2 1 2
+		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal,backup
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
+
+		# 10.0.2.2 (non-backup) -> 10.0.1.1 (backup)
+		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
+		# 10.0.1.2 (backup) -> 10.0.2.1 (non-backup)
+		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
+		ip -net "$ns2" route add 10.0.2.1 via 10.0.1.1 dev ns2eth1 # force this path
+
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
-		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_join_nr 2 2 2
+		chk_prio_nr 1 1 1 1
 	fi
 
 	if reset "mpc switch to backup" &&
@@ -2666,7 +2710,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 0 0
 	fi
 
 	if reset "mpc switch to backup both sides" &&
@@ -2676,7 +2720,7 @@ backup_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
-		chk_prio_nr 1 1
+		chk_prio_nr 1 1 0 0
 	fi
 }
 
@@ -3053,7 +3097,7 @@ fullmesh_tests()
 		addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 
@@ -3066,7 +3110,7 @@ fullmesh_tests()
 		sflags=nobackup,nofullmesh speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
-		chk_prio_nr 0 1
+		chk_prio_nr 0 1 1 0
 		chk_rm_nr 0 1
 	fi
 }
@@ -3318,7 +3362,7 @@ userspace_tests()
 		sflags=backup speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 0
-		chk_prio_nr 0 0
+		chk_prio_nr 0 0 0 0
 	fi
 
 	# userspace pm type prevents rm_addr