diff options
Diffstat (limited to 'Documentation/ABI/stable/sysfs-driver-mlxreg-io')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-driver-mlxreg-io | 717 |
1 files changed, 717 insertions, 0 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io new file mode 100644 index 0000000000..2cdfd09123 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -0,0 +1,717 @@ +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows ASIC health status. The possible values are: + 0 - health failed, 2 - health OK, 3 - ASIC in booting state. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD versions have been burned + on carrier and switch boards. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir +Date: December 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows the system fans direction: + forward direction - relevant bit is set 0; + reversed direction - relevant bit is set 1. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD versions have been burned + on LED or Gearbox board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files enable and disable the access to the JTAG domain. + By default access to the JTAG domain is disabled. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows iio devices selection. + + Attribute select_iio can be written with 0 or with 1. It + selects which one of iio devices can be accessed. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle + /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow asserting system power cycling, switching + power supply units on and off and system's main power domain + shutdown. + Expected behavior: + When pwr_cycle is written 1: auxiliary power domain will go + down and after short period (about 1 second) up. + When psu1_on or psu2_on is written 1, related unit will be + disconnected from the power source, when written 0 - connected. + If both are written 1 - power supplies main power domain will + go down. + When pwr_down is written 1, system's main power domain will go + down. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset +Date: June 2018 +KernelVersion: 4.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the system reset cause, as following: power + auxiliary outage or power refresh, ASIC thermal shutdown, halt, + hotswap, watchdog, firmware reset, long press power button, + short press power button, software reset. Value 1 in file means + this is reset cause, 0 - otherwise. Only one of the above + causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the system reset cause, as following: ComEx + power fail, reset from ComEx, system platform reset, reset + due to voltage monitor devices upgrade failure, + Value 1 in file means this is reset cause, 0 - otherwise. + Only one bit could be 1 at the same time, representing only + the last reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd +Date: June 2019 +KernelVersion: 5.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the system reset cause, as following: + COMEX thermal shutdown; wathchdog power off or reset was derived + by one of the next components: COMEX, switch board or by Small Form + Factor mezzanine, reset requested from ASIC, reset caused by BIOS + reload. Value 1 in file means this is reset cause, 0 - otherwise. + Only one of the above causes could be 1 at the same time, representing + only last reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show system static topology identification + like system's static I2C topology, number and type of FPGA + devices within the system and so on. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the system reset causes, as following: reset + due to AC power failure, reset invoked from software by + assertion reset signal through CPLD. reset caused by signal + asserted by SOC through ACPI register, reset invoked from + software by assertion power off signal through CPLD. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows to retain ASIC up during PCIe root complex + reset, when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows to overwrite system VPD hardware write + protection when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file exposes the configuration update status of burnable + voltage regulator devices. The status values are as following: + 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file exposes the firmware version of burnable voltage + regulator devices. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min +Date: July 2020 +KernelVersion: 5.9 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD part numbers and minor + versions have been burned CPLD devices equipped on a + system. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: The files represent BIOS statuses: + + bios_active_image: location of current active BIOS image: + 0: Top, 1: Bottom. + The reported value should correspond to value expected by OS + in case of BIOS safe mode is 0. This bit is related to Intel + top-swap feature of DualBios on the same flash. + + bios_auth_fail: BIOS upgrade is failed because provided BIOS + image is not signed correctly. + + bios_upgrade_fail: BIOS upgrade is failed by some other + reason not because authentication. For example due to + physical SPI flash problem. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow line cards enable state control. + Expected behavior: + When lc{n}_enable is written 1, related line card is released + from the reset state, when 0 - is hold in reset state. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files switching line cards power on and off. + Expected behavior: + When lc{n}_pwr is written 1, related line card is powered + on, when written 0 - powered off. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files clear line card reset bit enforced by ASIC, when it + sets it due to some abnormal ASIC behavior. + Expected behavior: + When lc{n}_rst_mask is written 1, related line card reset bit + is cleared, when written 0 - no effect. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file, when written 1, indicates to programmable devices + that OS is taking control over it. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file assigns power management control ownership. + When power management control is provided by hardware, hardware + will automatically power off one or more line previously + powered line cards in case system power budget is getting + insufficient. It could be in case when some of power units lost + power good state. + When pm_mgmt_en is written 1, power management control by + software is enabled, 0 - power management control by hardware. + Note that for any setting of pm_mgmt_en attribute hardware will + not allow to power on any new line card in case system power + budget is insufficient. + Same in case software will try to power on several line cards + at once - hardware will power line cards while system has + enough power budget. + Default is 0. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files switching power supply units on and off. + Expected behavior: + When psu3_on or psu4_on is written 1, related unit will be + disconnected from the power source, when written 0 - connected. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows to unlock ASIC after thermal shutdown event. + When system thermal shutdown is enforced by ASIC, ASIC is + getting locked and after system boot it will not be available. + Software can decide to unlock it by setting this attribute to + 1 and then perform system power cycle by setting pwr_cycle + attribute to 1 (power cycle of main power domain). + Before setting shutdown_unlock to 1 it is recommended to + validate that system reboot cause is reset_asic_thermal or + reset_thermal_spc_or_pciesw. + In case shutdown_unlock is not set 1, the only way to release + ASIC from locking - is full system power cycle through the + external power distribution unit. + Default is 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD major and minor versions + and part number has been burned CPLD device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which FPGA major and minor versions + and part number has been burned FPGA device on line card. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allow to overwrite line card VPD hardware write + protection mode. When attribute is set 1 - write protection is + disabled, when 0 - enabled. + Default is 0. + If the system is in locked-down mode writing this file will not + be allowed. + The purpose if this file is to allow line card VPD burning + during production flow. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the line reset cause, as following: power + auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset + failed, line card reset failed, power off from chassis. + Value 1 in file means this is reset cause, 0 - otherwise. Only one of + the above causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow CPLD and FPGA burning. Value 1 in file means burning + is enabled, 0 - otherwise. + If the system is in locked-down mode writing these files will + not be allowed. + The purpose of these files to allow line card CPLD and FPGA + upgrade through the JTAG daisy-chain. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow to power on/off all QSFP ports and whole line card. + The attributes are set 1 for power on, 0 - for power off. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow gearboxes and FPGA SPI flash burning. + The attributes are set 1 to enable burning, 0 - to disable. + If the system is in locked-down mode writing these files will + not be allowed. + The purpose of these files to allow line card Gearboxes and FPGA + burning during production flow. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config +Date: October 2021 +KernelVersion: 5.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files provide the maximum powered required for line card + feeding and line card configuration Id. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset +Date: May 2022 +KernelVersion: 5.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows to reset PHY 88E1548 when attribute is set 0 + due to some abnormal PHY behavior. + Expected behavior: + When phy_reset is written 1, all PHY 88E1548 are released + from the reset state, when 0 - are hold in reset state. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset +Date: May 2022 +KernelVersion: 5.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows to reset ASIC MT52132 when attribute is set 0 + due to some abnormal ASIC behavior. + Expected behavior: + When mac_reset is written 1, the ASIC MT52132 is released + from the reset state, when 0 - is hold in reset state. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good +Date: May 2022 +KernelVersion: 5.19 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows QSFP ports power status. The value is set to 0 + when one of any QSFP ports is plugged. The value is set to 1 when + there are no any QSFP ports are plugged. + The possible values are: + 0 - Power good, 1 - Not power good. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows 2-nd ASIC health status. The possible values are: + 0 - health failed, 2 - health OK, 3 - ASIC in booting state. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow to each of ASICs by writing 1. + + The files are write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready +Date: July 2022 +KernelVersion: 5.20 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file is used to indicate remote end (for example BMC) that system + host CPU is ready for sending telemetry data to remote end. + For indication the file should be written 1. + + The file is write only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: The file indicates COME module hardware configuration. + The value is pushed by hardware through GPIO pins. + The purpose is to expose some minor BOM changes for the same system SKU. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_pwr_converter_fail +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows the system reset cause due to power converter + devices failure. + Value 1 in file means this is reset cause, 0 - otherwise. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_ap_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_ap_reset +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files aim to monitor the status of the External Root of Trust (EROT) + processor's RESET output to the Application Processor (AP). + By reading this file, could be determined if the EROT has invalidated or + revoked AP Firmware, at which point it will hold the AP in RESET until a + valid firmware is loaded. This protects the AP from running an + unauthorized firmware. In the normal flow, the AP reset should be released + after the EROT validates the integrity of the FW, and it should be done so + as quickly as possible so that the AP boots before the CPU starts to + communicate to each ASIC. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_recovery +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_recovery +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_reset +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files aim to perform External Root of Trust (EROT) recovery + sequence after EROT device failure. + These EROT devices protect ASICs from unauthorized access and in normal + flow their reset should be released with system power – earliest power + up stage, so that EROTs can begin boot and authentication process before + CPU starts to communicate to ASICs. + Issuing a reset to the EROT while asserting the recovery signal will cause + the EROT Application Processor to enter recovery mode so that the EROT FW + can be updated/recovered. + For reset/recovery the related file should be toggled by 1/0. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_wp +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_wp +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow access to External Root of Trust (EROT) for reset + and recovery sequence after EROT device failure. + Default is 0 (programming disabled). + If the system is in locked-down mode writing this file will not be allowed. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/spi_chnl_select +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file allows SPI chip selection for External Root of Trust (EROT) + device Out-of-Band recovery. + File can be written with 0 or with 1. It selects which EROT can be accessed + through SPI device. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_pg_fail +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak vadimp@nvidia.com +Description: This file shows ASIC Power Good status. + Value 1 in file means ASIC Power Good failed, 0 - otherwise. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd1_boot_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd2_boot_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_fail +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak vadimp@nvidia.com +Description: These files are related to clock boards status in system. + - clk_brd1_boot_fail: warning about 1-st clock board failed to boot from CI. + - clk_brd2_boot_fail: warning about 2-nd clock board failed to boot from CI. + - clk_brd_fail: error about common clock board boot failure. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_prog_en +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file enables programming of clock boards. + Default is 0 (programming disabled). + If the system is in locked-down mode writing this file will not be allowed. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_converter_prog_en +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file enables programming of power converters. + Default is 0 (programming disabled). + If the system is in locked-down mode writing this file will not be allowed. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_ok_fail +Date: February 2023 +KernelVersion: 6.3 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows the system reset cause due to AC power failure. + Value 1 in file means this is reset cause, 0 - otherwise. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version_min +Date: August 2023 +KernelVersion: 6.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show with which CPLD part numbers, version and minor + versions have been burned the 5-th CPLD device equipped on a + system. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_cap +Date: August 2023 +KernelVersion: 6.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file indicates the available method of CPLD/FPGA devices + field update through the JTAG chain: + + b00 - field update through LPC bus register memory space. + b01 - Reserved. + b10 - Reserved. + b11 - field update through CPU GPIOs bit-banging. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lid_open +Date: August 2023 +KernelVersion: 6.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: 1 - indicates that system lid is opened, otherwise 0. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pwr_pb +Date: August 2023 +KernelVersion: 6.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file if set 1 indicates that system has been reset by + long press of power button. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_dc_dc_pwr_fail +Date: August 2023 +KernelVersion: 6.6 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows 1 in case the system reset happened due to the + failure of any DC-DC power converter devices equipped on the + switch board. + + The file is read only. |