summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/stable/sysfs-driver-mlxreg-io
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/stable/sysfs-driver-mlxreg-io')
-rw-r--r--Documentation/ABI/stable/sysfs-driver-mlxreg-io717
1 files changed, 717 insertions, 0 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
new file mode 100644
index 0000000000..2cdfd09123
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -0,0 +1,717 @@
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on carrier and switch boards.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
+Date: December 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system fans direction:
+ forward direction - relevant bit is set 0;
+ reversed direction - relevant bit is set 1.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on LED or Gearbox board.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files enable and disable the access to the JTAG domain.
+ By default access to the JTAG domain is disabled.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows iio devices selection.
+
+ Attribute select_iio can be written with 0 or with 1. It
+ selects which one of iio devices can be accessed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow asserting system power cycling, switching
+ power supply units on and off and system's main power domain
+ shutdown.
+ Expected behavior:
+ When pwr_cycle is written 1: auxiliary power domain will go
+ down and after short period (about 1 second) up.
+ When psu1_on or psu2_on is written 1, related unit will be
+ disconnected from the power source, when written 0 - connected.
+ If both are written 1 - power supplies main power domain will
+ go down.
+ When pwr_down is written 1, system's main power domain will go
+ down.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following: power
+ auxiliary outage or power refresh, ASIC thermal shutdown, halt,
+ hotswap, watchdog, firmware reset, long press power button,
+ short press power button, software reset. Value 1 in file means
+ this is reset cause, 0 - otherwise. Only one of the above
+ causes could be 1 at the same time, representing only last
+ reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following: ComEx
+ power fail, reset from ComEx, system platform reset, reset
+ due to voltage monitor devices upgrade failure,
+ Value 1 in file means this is reset cause, 0 - otherwise.
+ Only one bit could be 1 at the same time, representing only
+ the last reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on LED board.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+Date: June 2019
+KernelVersion: 5.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following:
+ COMEX thermal shutdown; wathchdog power off or reset was derived
+ by one of the next components: COMEX, switch board or by Small Form
+ Factor mezzanine, reset requested from ASIC, reset caused by BIOS
+ reload. Value 1 in file means this is reset cause, 0 - otherwise.
+ Only one of the above causes could be 1 at the same time, representing
+ only last reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show system static topology identification
+ like system's static I2C topology, number and type of FPGA
+ devices within the system and so on.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset causes, as following: reset
+ due to AC power failure, reset invoked from software by
+ assertion reset signal through CPLD. reset caused by signal
+ asserted by SOC through ACPI register, reset invoked from
+ software by assertion power off signal through CPLD.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to retain ASIC up during PCIe root complex
+ reset, when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to overwrite system VPD hardware write
+ protection when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file exposes the configuration update status of burnable
+ voltage regulator devices. The status values are as following:
+ 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file exposes the firmware version of burnable voltage
+ regulator devices.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
+Date: July 2020
+KernelVersion: 5.9
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD part numbers and minor
+ versions have been burned CPLD devices equipped on a
+ system.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: The files represent BIOS statuses:
+
+ bios_active_image: location of current active BIOS image:
+ 0: Top, 1: Bottom.
+ The reported value should correspond to value expected by OS
+ in case of BIOS safe mode is 0. This bit is related to Intel
+ top-swap feature of DualBios on the same flash.
+
+ bios_auth_fail: BIOS upgrade is failed because provided BIOS
+ image is not signed correctly.
+
+ bios_upgrade_fail: BIOS upgrade is failed by some other
+ reason not because authentication. For example due to
+ physical SPI flash problem.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow line cards enable state control.
+ Expected behavior:
+ When lc{n}_enable is written 1, related line card is released
+ from the reset state, when 0 - is hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files switching line cards power on and off.
+ Expected behavior:
+ When lc{n}_pwr is written 1, related line card is powered
+ on, when written 0 - powered off.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files clear line card reset bit enforced by ASIC, when it
+ sets it due to some abnormal ASIC behavior.
+ Expected behavior:
+ When lc{n}_rst_mask is written 1, related line card reset bit
+ is cleared, when written 0 - no effect.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file, when written 1, indicates to programmable devices
+ that OS is taking control over it.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file assigns power management control ownership.
+ When power management control is provided by hardware, hardware
+ will automatically power off one or more line previously
+ powered line cards in case system power budget is getting
+ insufficient. It could be in case when some of power units lost
+ power good state.
+ When pm_mgmt_en is written 1, power management control by
+ software is enabled, 0 - power management control by hardware.
+ Note that for any setting of pm_mgmt_en attribute hardware will
+ not allow to power on any new line card in case system power
+ budget is insufficient.
+ Same in case software will try to power on several line cards
+ at once - hardware will power line cards while system has
+ enough power budget.
+ Default is 0.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files switching power supply units on and off.
+ Expected behavior:
+ When psu3_on or psu4_on is written 1, related unit will be
+ disconnected from the power source, when written 0 - connected.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to unlock ASIC after thermal shutdown event.
+ When system thermal shutdown is enforced by ASIC, ASIC is
+ getting locked and after system boot it will not be available.
+ Software can decide to unlock it by setting this attribute to
+ 1 and then perform system power cycle by setting pwr_cycle
+ attribute to 1 (power cycle of main power domain).
+ Before setting shutdown_unlock to 1 it is recommended to
+ validate that system reboot cause is reset_asic_thermal or
+ reset_thermal_spc_or_pciesw.
+ In case shutdown_unlock is not set 1, the only way to release
+ ASIC from locking - is full system power cycle through the
+ external power distribution unit.
+ Default is 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD major and minor versions
+ and part number has been burned CPLD device on line card.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which FPGA major and minor versions
+ and part number has been burned FPGA device on line card.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allow to overwrite line card VPD hardware write
+ protection mode. When attribute is set 1 - write protection is
+ disabled, when 0 - enabled.
+ Default is 0.
+ If the system is in locked-down mode writing this file will not
+ be allowed.
+ The purpose if this file is to allow line card VPD burning
+ during production flow.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the line reset cause, as following: power
+ auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset
+ failed, line card reset failed, power off from chassis.
+ Value 1 in file means this is reset cause, 0 - otherwise. Only one of
+ the above causes could be 1 at the same time, representing only last
+ reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow CPLD and FPGA burning. Value 1 in file means burning
+ is enabled, 0 - otherwise.
+ If the system is in locked-down mode writing these files will
+ not be allowed.
+ The purpose of these files to allow line card CPLD and FPGA
+ upgrade through the JTAG daisy-chain.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow to power on/off all QSFP ports and whole line card.
+ The attributes are set 1 for power on, 0 - for power off.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow gearboxes and FPGA SPI flash burning.
+ The attributes are set 1 to enable burning, 0 - to disable.
+ If the system is in locked-down mode writing these files will
+ not be allowed.
+ The purpose of these files to allow line card Gearboxes and FPGA
+ burning during production flow.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files provide the maximum powered required for line card
+ feeding and line card configuration Id.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to reset PHY 88E1548 when attribute is set 0
+ due to some abnormal PHY behavior.
+ Expected behavior:
+ When phy_reset is written 1, all PHY 88E1548 are released
+ from the reset state, when 0 - are hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to reset ASIC MT52132 when attribute is set 0
+ due to some abnormal ASIC behavior.
+ Expected behavior:
+ When mac_reset is written 1, the ASIC MT52132 is released
+ from the reset state, when 0 - is hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows QSFP ports power status. The value is set to 0
+ when one of any QSFP ports is plugged. The value is set to 1 when
+ there are no any QSFP ports are plugged.
+ The possible values are:
+ 0 - Power good, 1 - Not power good.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows 2-nd ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow to each of ASICs by writing 1.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file is used to indicate remote end (for example BMC) that system
+ host CPU is ready for sending telemetry data to remote end.
+ For indication the file should be written 1.
+
+ The file is write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: The file indicates COME module hardware configuration.
+ The value is pushed by hardware through GPIO pins.
+ The purpose is to expose some minor BOM changes for the same system SKU.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_pwr_converter_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system reset cause due to power converter
+ devices failure.
+ Value 1 in file means this is reset cause, 0 - otherwise.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_ap_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_ap_reset
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files aim to monitor the status of the External Root of Trust (EROT)
+ processor's RESET output to the Application Processor (AP).
+ By reading this file, could be determined if the EROT has invalidated or
+ revoked AP Firmware, at which point it will hold the AP in RESET until a
+ valid firmware is loaded. This protects the AP from running an
+ unauthorized firmware. In the normal flow, the AP reset should be released
+ after the EROT validates the integrity of the FW, and it should be done so
+ as quickly as possible so that the AP boots before the CPU starts to
+ communicate to each ASIC.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_recovery
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_recovery
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_reset
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files aim to perform External Root of Trust (EROT) recovery
+ sequence after EROT device failure.
+ These EROT devices protect ASICs from unauthorized access and in normal
+ flow their reset should be released with system power – earliest power
+ up stage, so that EROTs can begin boot and authentication process before
+ CPU starts to communicate to ASICs.
+ Issuing a reset to the EROT while asserting the recovery signal will cause
+ the EROT Application Processor to enter recovery mode so that the EROT FW
+ can be updated/recovered.
+ For reset/recovery the related file should be toggled by 1/0.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_wp
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_wp
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow access to External Root of Trust (EROT) for reset
+ and recovery sequence after EROT device failure.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/spi_chnl_select
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows SPI chip selection for External Root of Trust (EROT)
+ device Out-of-Band recovery.
+ File can be written with 0 or with 1. It selects which EROT can be accessed
+ through SPI device.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_pg_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak vadimp@nvidia.com
+Description: This file shows ASIC Power Good status.
+ Value 1 in file means ASIC Power Good failed, 0 - otherwise.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd1_boot_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd2_boot_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak vadimp@nvidia.com
+Description: These files are related to clock boards status in system.
+ - clk_brd1_boot_fail: warning about 1-st clock board failed to boot from CI.
+ - clk_brd2_boot_fail: warning about 2-nd clock board failed to boot from CI.
+ - clk_brd_fail: error about common clock board boot failure.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_prog_en
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file enables programming of clock boards.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_converter_prog_en
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file enables programming of power converters.
+ Default is 0 (programming disabled).
+ If the system is in locked-down mode writing this file will not be allowed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_ok_fail
+Date: February 2023
+KernelVersion: 6.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system reset cause due to AC power failure.
+ Value 1 in file means this is reset cause, 0 - otherwise.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld5_version_min
+Date: August 2023
+KernelVersion: 6.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD part numbers, version and minor
+ versions have been burned the 5-th CPLD device equipped on a
+ system.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_cap
+Date: August 2023
+KernelVersion: 6.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file indicates the available method of CPLD/FPGA devices
+ field update through the JTAG chain:
+
+ b00 - field update through LPC bus register memory space.
+ b01 - Reserved.
+ b10 - Reserved.
+ b11 - field update through CPU GPIOs bit-banging.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lid_open
+Date: August 2023
+KernelVersion: 6.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: 1 - indicates that system lid is opened, otherwise 0.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pwr_pb
+Date: August 2023
+KernelVersion: 6.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file if set 1 indicates that system has been reset by
+ long press of power button.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_dc_dc_pwr_fail
+Date: August 2023
+KernelVersion: 6.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows 1 in case the system reset happened due to the
+ failure of any DC-DC power converter devices equipped on the
+ switch board.
+
+ The file is read only.