diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 new file mode 100644 index 0000000000..f8315202c8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 @@ -0,0 +1,51 @@ +What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to enable the AC + excitation mode found on some converters. In ac excitation mode, + the polarity of the excitation voltage is reversed on + alternate cycles, to eliminate DC errors. + +What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to close or open the + bridge power down switch found on some converters. + In bridge applications, such as strain gauges and load cells, + the bridge itself consumes the majority of the current in the + system. To minimize the current consumption of the system, + the bridge can be disconnected (when it is not being used + using the bridge_switch_en attribute. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Initiates the system calibration procedure. This is done on a + single channel at a time. Write '1' to start the calibration. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Measure voltage from AIN2 pin connected to AIN(+) + and AIN(-) shorted. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible calibration modes. + There are two available options: + "zero_scale" - calibrate to zero scale + "full_scale" - calibrate to full scale + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Sets up the calibration mode used in the system calibration + procedure. Reading returns the current calibration mode. + Writing sets the system calibration mode. |