summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-adc-mcp356453
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
new file mode 100644
index 0000000000..b168aa44b2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
@@ -0,0 +1,53 @@
+What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain
+KernelVersion: 6.4
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to set the gain of the biasing current
+ circuit of the Delta-Sigma modulator. The different BOOST
+ settings are applied to the entire modulator circuit, including
+ the voltage reference buffers.
+
+What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain_available
+KernelVersion: 6.4
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reading returns a list with the possible gain values for
+ the current biasing circuit of the Delta-Sigma modulator.
+
+What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_mux_enable
+KernelVersion: 6.4
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to enable the analog input multiplexer
+ auto-zeroing algorithm (the input multiplexer and the ADC
+ include an offset cancellation algorithm that cancels the offset
+ contribution of the ADC). When the offset cancellation algorithm
+ is enabled, ADC takes two conversions, one with the differential
+ input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the
+ conversion time is multiplied by two compared to the default
+ case where the algorithm is disabled. This technique allows the
+ cancellation of the ADC offset error and the achievement of
+ ultra-low offset without any digital calibration. The resulting
+ offset is the residue of the difference between the two
+ conversions, which is on the order of magnitude of the noise
+ floor. This offset is effectively canceled at every conversion,
+ so the residual offset error temperature drift is extremely low.
+ Write '1' to enable it, write '0' to disable it.
+
+What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_ref_enable
+KernelVersion: 6.4
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute is used to enable the chopping algorithm for the
+ internal voltage reference buffer. This setting has no effect
+ when external voltage reference is selected.
+ Internal voltage reference buffer injects a certain quantity of
+ 1/f noise into the system that can be modulated with the
+ incoming input signals and can limit the SNR performance at
+ higher Oversampling Ratio values (over 256). To overcome this
+ limitation, the buffer includes an auto-zeroing algorithm that
+ greatly reduces (cancels out) the 1/f noise and cancels the
+ offset value of the reference buffer. As a result, the SNR of
+ the system is not affected by this 1/f noise component of the
+ reference buffer, even at maximum oversampling ratio values.
+ Write '1' to enable it, write '0' to disable it.