diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar new file mode 100644 index 0000000000..57a0377914 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar @@ -0,0 +1,74 @@ +What: /sys/class/chromeos/<ec-device-name>/lightbar/brightness +Date: August 2015 +KernelVersion: 4.2 +Description: + Writing to this file adjusts the overall brightness of + the lightbar, separate from any color intensity. The + valid range is 0 (off) to 255 (maximum brightness). + +What: /sys/class/chromeos/<ec-device-name>/lightbar/interval_msec +Date: August 2015 +KernelVersion: 4.2 +Description: + The lightbar is controlled by an embedded controller (EC), + which also manages the keyboard, battery charging, fans, + and other system hardware. To prevent unprivileged users + from interfering with the other EC functions, the rate at + which the lightbar control files can be read or written is + limited. + + Reading this file will return the number of milliseconds + that must elapse between accessing any of the lightbar + functions through this interface. Going faster will simply + block until the necessary interval has lapsed. The interval + applies uniformly to all accesses of any kind by any user. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/led_rgb +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to control each LED segment. If the + lightbar is already running one of the automatic + sequences, you probably won’t see anything change because + your color setting will be almost immediately replaced. + To get useful results, you should stop the lightbar + sequence first. + + The values written to this file are sets of four integers, + indicating LED, RED, GREEN, BLUE. The LED number is 0 to 3 + to select a single segment, or 4 to set all four segments + to the same value at once. The RED, GREEN, and BLUE + numbers should be in the range 0 (off) to 255 (maximum). + You can update more than one segment at a time by writing + more than one set of four integers. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/program +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to upload and run custom lightbar sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/sequence +Date: August 2015 +KernelVersion: 4.2 +Description: + The Pixel lightbar has a number of built-in sequences + that it displays under various conditions, such as at + power on, shut down, or while running. Reading from this + file displays the current sequence that the lightbar is + displaying. Writing to this file allows you to change the + sequence. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/userspace_control +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to take the control of the lightbar. This + prevents the kernel from going through its normal + sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/version +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the information about the lightbar version. |