diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-led-trigger-netdev | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev new file mode 100644 index 0000000000..f6d9d72ce7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -0,0 +1,141 @@ +What: /sys/class/leds/<led>/device_name +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the network device name to monitor. + +What: /sys/class/leds/<led>/interval +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the duration of the LED blink in milliseconds. + Defaults to 50 ms. + + When offloaded is true, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + +What: /sys/class/leds/<led>/link +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + of the named network device. + Setting this value also immediately changes the LED state. + + +What: /sys/class/leds/<led>/tx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal transmission of data on the named network device. + + If set to 0 (default), the LED will not blink on transmission. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal transmission. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/rx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal reception of data on the named network device. + + If set to 0 (default), the LED will not blink on reception. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal reception. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/offloaded +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED blinking in requested mode is offloaded to + hardware. + +What: /sys/class/leds/<led>/link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. |