summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-netdev')
-rw-r--r--Documentation/ABI/testing/sysfs-class-led-trigger-netdev141
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
new file mode 100644
index 0000000000..f6d9d72ce7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -0,0 +1,141 @@
+What: /sys/class/leds/<led>/device_name
+Date: Dec 2017
+KernelVersion: 4.16
+Contact: linux-leds@vger.kernel.org
+Description:
+ Specifies the network device name to monitor.
+
+What: /sys/class/leds/<led>/interval
+Date: Dec 2017
+KernelVersion: 4.16
+Contact: linux-leds@vger.kernel.org
+Description:
+ Specifies the duration of the LED blink in milliseconds.
+ Defaults to 50 ms.
+
+ When offloaded is true, the interval value MUST be set to the
+ default value and cannot be changed.
+ Trying to set any value in this specific mode will return
+ an EINVAL error.
+
+What: /sys/class/leds/<led>/link
+Date: Dec 2017
+KernelVersion: 4.16
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link state of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link state
+ of the named network device.
+ Setting this value also immediately changes the LED state.
+
+
+What: /sys/class/leds/<led>/tx
+Date: Dec 2017
+KernelVersion: 4.16
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal transmission of data on the named network device.
+
+ If set to 0 (default), the LED will not blink on transmission.
+
+ If set to 1, the LED will blink for the milliseconds specified
+ in interval to signal transmission.
+
+ When offloaded is true, the blink interval is controlled by
+ hardware and won't reflect the value set in interval.
+
+What: /sys/class/leds/<led>/rx
+Date: Dec 2017
+KernelVersion: 4.16
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal reception of data on the named network device.
+
+ If set to 0 (default), the LED will not blink on reception.
+
+ If set to 1, the LED will blink for the milliseconds specified
+ in interval to signal reception.
+
+ When offloaded is true, the blink interval is controlled by
+ hardware and won't reflect the value set in interval.
+
+What: /sys/class/leds/<led>/offloaded
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Communicate whether the LED trigger modes are offloaded to
+ hardware or whether software fallback is used.
+
+ If 0, the LED is using software fallback to blink.
+
+ If 1, the LED blinking in requested mode is offloaded to
+ hardware.
+
+What: /sys/class/leds/<led>/link_10
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link speed state of 10Mbps of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link state
+ speed of 10MBps of the named network device.
+ Setting this value also immediately changes the LED state.
+
+What: /sys/class/leds/<led>/link_100
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link speed state of 100Mbps of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link state
+ speed of 100Mbps of the named network device.
+ Setting this value also immediately changes the LED state.
+
+What: /sys/class/leds/<led>/link_1000
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link speed state of 1000Mbps of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link state
+ speed of 1000Mbps of the named network device.
+ Setting this value also immediately changes the LED state.
+
+What: /sys/class/leds/<led>/half_duplex
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link half duplex state of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link half
+ duplex state of the named network device.
+ Setting this value also immediately changes the LED state.
+
+What: /sys/class/leds/<led>/full_duplex
+Date: Jun 2023
+KernelVersion: 6.5
+Contact: linux-leds@vger.kernel.org
+Description:
+ Signal the link full duplex state of the named network device.
+
+ If set to 0 (default), the LED's normal state is off.
+
+ If set to 1, the LED's normal state reflects the link full
+ duplex state of the named network device.
+ Setting this value also immediately changes the LED state.