summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-class-net-qmi
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-qmi76
1 files changed, 76 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
new file mode 100644
index 0000000000..b028f5bc86
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -0,0 +1,76 @@
+What: /sys/class/net/<iface>/qmi/raw_ip
+Date: Dec 2015
+KernelVersion: 4.4
+Contact: Bjørn Mork <bjorn@mork.no>
+Description:
+ Boolean. Default: 'N'
+
+ Set this to 'Y' to change the network device link
+ framing from '802.3' to 'raw-ip'.
+
+ The netdev will change to reflect the link framing
+ mode. The netdev is an ordinary ethernet device in
+ '802.3' mode, and the driver expects to exchange
+ frames with an ethernet header over the USB link. The
+ netdev is a headerless p-t-p device in 'raw-ip' mode,
+ and the driver expects to echange IPv4 or IPv6 packets
+ without any L2 header over the USB link.
+
+ Userspace is in full control of firmware configuration
+ through the delegation of the QMI protocol. Userspace
+ is responsible for coordination of driver and firmware
+ link framing mode, changing this setting to 'Y' if the
+ firmware is configured for 'raw-ip' mode.
+
+What: /sys/class/net/<iface>/qmi/add_mux
+Date: March 2017
+KernelVersion: 4.11
+Contact: Bjørn Mork <bjorn@mork.no>
+Description:
+ Unsigned integer.
+
+ Write a number ranging from 1 to 254 to add a qmap mux
+ based network device, supported by recent Qualcomm based
+ modems.
+
+ The network device will be called qmimux.
+
+ Userspace is in charge of managing the qmux network device
+ activation and data stream setup on the modem side by
+ using the proper QMI protocol requests.
+
+What: /sys/class/net/<iface>/qmi/del_mux
+Date: March 2017
+KernelVersion: 4.11
+Contact: Bjørn Mork <bjorn@mork.no>
+Description:
+ Unsigned integer.
+
+ Write a number ranging from 1 to 254 to delete a previously
+ created qmap mux based network device.
+
+What: /sys/class/net/<qmimux iface>/qmap/mux_id
+Date: January 2021
+KernelVersion: 5.12
+Contact: Daniele Palmas <dnlplm@gmail.com>
+Description:
+ Unsigned integer
+
+ Indicates the mux id associated to the qmimux network interface
+ during its creation.
+
+What: /sys/class/net/<iface>/qmi/pass_through
+Date: January 2021
+KernelVersion: 5.12
+Contact: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
+Description:
+ Boolean. Default: 'N'
+
+ Set this to 'Y' to enable 'pass-through' mode, allowing packets
+ in MAP format to be passed on to the stack.
+
+ Normally the rmnet driver (CONFIG_RMNET) is then used to process
+ and demultiplex these packets.
+
+ 'Pass-through' mode can be enabled when the device is in
+ 'raw-ip' mode only.