diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-wacom')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-wacom | 105 |
1 files changed, 105 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom new file mode 100644 index 0000000000..16acaa5712 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -0,0 +1,105 @@ +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed +Date: April 2010 +KernelVersion: 2.6.35 +Contact: linux-bluetooth@vger.kernel.org +Description: + The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file + controls reporting speed of Wacom bluetooth tablet. Reading + from this file returns 1 if tablet reports in high speed mode + or 0 otherwise. Writing to this file one of these values + switches reporting speed. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + Attribute group for control of the status LEDs and the OLEDs. + This attribute group is only available for Intuos 4 M, L, + and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only), + Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD + (LEDs only). Therefore its presence implicitly signifies the + presence of said LEDs and OLEDs on the tablet device. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + <obsoleted by the LED class API now exported by the driver> + Writing to this file sets the status LED luminance (1..127) + when the stylus does not touch the tablet surface, and no + button is pressed on the stylus. This luminance level is + normally lower than the level when a button is pressed. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + <obsoleted by the LED class API now exported by the driver> + Writing to this file sets the status LED luminance (1..127) + when the stylus touches the tablet surface, or any button is + pressed on the stylus. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + <obsoleted by the LED class API now exported by the driver> + Writing to this file sets which one of the four (for Intuos 4 + and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq + 24HD) status LEDs is active (0..3). The other three LEDs on the + same side are always inactive. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + <obsoleted by the LED class API now exported by the driver> + Writing to this file sets which one of the left four (for Cintiq 21UX2 + and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on + the left are always inactive. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + Writing to this file sets the overall luminance level (0..15) + of all eight button OLED displays. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg +Date: August 2014 +Contact: linux-input@vger.kernel.org +Description: + When writing a 1024 byte raw image in Wacom Intuos 4 + interleaving format to the file, the image shows up on Button N + of the device. The image is a 64x32 pixel 4-bit gray image. The + 1024 byte binary is split up into 16x 64 byte chunks. Each 64 + byte chunk encodes the image data for two consecutive lines on + the display. The low nibble of each byte contains the first + line, and the high nibble contains the second line. + When the Wacom Intuos 4 is connected over Bluetooth, the + image has to contain 256 bytes (64x32 px 1 bit colour). + The format is also scrambled, like in the USB mode, and it can + be summarized by converting:: + + 76543210 into GECA6420. + HGFEDCBA HFDB7531 + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote +Date: July 2015 +Contact: linux-input@vger.kernel.org +Description: + Writing the character sequence '*' followed by a newline to + this file will delete all of the current pairings on the + device. Other character sequences are reserved. This file is + write only. + +What: /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode +Date: July 2015 +Contact: linux-input@vger.kernel.org +Description: + <obsoleted by the LED class API now exported by the driver> + Reading from this file reports the mode status of the + remote as indicated by the LED lights on the device. If no + reports have been received from the paired device, reading + from this file will report '-1'. The mode is read-only + and cannot be set through the driver. |