summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-zynqmp-fpga')
-rw-r--r--Documentation/ABI/testing/sysfs-driver-zynqmp-fpga73
1 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
new file mode 100644
index 0000000000..8f93d27b6d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
@@ -0,0 +1,73 @@
+What: /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
+Date: February 2023
+KernelVersion: 6.4
+Contact: Nava kishore Manne <nava.kishore.manne@amd.com>
+Description: (RO) Read fpga status.
+ Read returns a hexadecimal value that tells the current status
+ of the FPGA device. Each bit position in the status value is
+ described Below(see ug570 chapter 9).
+ https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration
+
+ ====================== ==============================================
+ BIT(0) 0: No CRC error
+ 1: CRC error
+
+ BIT(1) 0: Decryptor security not set
+ 1: Decryptor security set
+
+ BIT(2) 0: MMCMs/PLLs are not locked
+ 1: MMCMs/PLLs are locked
+
+ BIT(3) 0: DCI not matched
+ 1: DCI matched
+
+ BIT(4) 0: Start-up sequence has not finished
+ 1: Start-up sequence has finished
+
+ BIT(5) 0: All I/Os are placed in High-Z state
+ 1: All I/Os behave as configured
+
+ BIT(6) 0: Flip-flops and block RAM are write disabled
+ 1: Flip-flops and block RAM are write enabled
+
+ BIT(7) 0: GHIGH_B_STATUS asserted
+ 1: GHIGH_B_STATUS deasserted
+
+ BIT(8) to BIT(10) Status of the mode pins
+
+ BIT(11) 0: Initialization has not finished
+ 1: Initialization finished
+
+ BIT(12) Value on INIT_B_PIN pin
+
+ BIT(13) 0: Signal not released
+ 1: Signal released
+
+ BIT(14) Value on DONE_PIN pin.
+
+ BIT(15) 0: No IDCODE_ERROR
+ 1: IDCODE_ERROR
+
+ BIT(16) 0: No SECURITY_ERROR
+ 1: SECURITY_ERROR
+
+ BIT(17) System Monitor over-temperature if set
+
+ BIT(18) to BIT(20) Start-up state machine (0 to 7)
+ Phase 0 = 000
+ Phase 1 = 001
+ Phase 2 = 011
+ Phase 3 = 010
+ Phase 4 = 110
+ Phase 5 = 111
+ Phase 6 = 101
+ Phase 7 = 100
+
+ BIT(25) to BIT(26) Indicates the detected bus width
+ 00 = x1
+ 01 = x8
+ 10 = x16
+ 11 = x32
+ ====================== ==============================================
+
+ The other bits are reserved.