diff options
Diffstat (limited to 'Documentation/ABI/testing')
27 files changed, 859 insertions, 130 deletions
diff --git a/Documentation/ABI/testing/configfs-tsm b/Documentation/ABI/testing/configfs-tsm new file mode 100644 index 0000000000..dd24202b5b --- /dev/null +++ b/Documentation/ABI/testing/configfs-tsm @@ -0,0 +1,82 @@ +What: /sys/kernel/config/tsm/report/$name/inblob +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (WO) Up to 64 bytes of user specified binary data. For replay + protection this should include a nonce, but the kernel does not + place any restrictions on the content. + +What: /sys/kernel/config/tsm/report/$name/outblob +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (RO) Binary attestation report generated from @inblob and other + options The format of the report is implementation specific + where the implementation is conveyed via the @provider + attribute. + +What: /sys/kernel/config/tsm/report/$name/auxblob +Date: October, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (RO) Optional supplemental data that a TSM may emit, visibility + of this attribute depends on TSM, and may be empty if no + auxiliary data is available. + + When @provider is "sev_guest" this file contains the + "cert_table" from SEV-ES Guest-Hypervisor Communication Block + Standardization v2.03 Section 4.1.8.1 MSG_REPORT_REQ. + https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56421.pdf + +What: /sys/kernel/config/tsm/report/$name/provider +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (RO) A name for the format-specification of @outblob like + "sev_guest" [1] or "tdx_guest" [2] in the near term, or a + common standard format in the future. + + [1]: SEV Secure Nested Paging Firmware ABI Specification + Revision 1.55 Table 22 + https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56860.pdf + + [2]: Intel® Trust Domain Extensions Data Center Attestation + Primitives : Quote Generation Library and Quote Verification + Library Revision 0.8 Appendix 4,5 + https://download.01.org/intel-sgx/latest/dcap-latest/linux/docs/Intel_TDX_DCAP_Quoting_Library_API.pdf + +What: /sys/kernel/config/tsm/report/$name/generation +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (RO) The value in this attribute increments each time @inblob or + any option is written. Userspace can detect conflicts by + checking generation before writing to any attribute and making + sure the number of writes matches expectations after reading + @outblob, or it can prevent conflicts by creating a report + instance per requesting context. + +What: /sys/kernel/config/tsm/report/$name/privlevel +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (WO) Attribute is visible if a TSM implementation provider + supports the concept of attestation reports for TVMs running at + different privilege levels, like SEV-SNP "VMPL", specify the + privilege level via this attribute. The minimum acceptable + value is conveyed via @privlevel_floor and the maximum + acceptable value is TSM_PRIVLEVEL_MAX (3). + +What: /sys/kernel/config/tsm/report/$name/privlevel_floor +Date: September, 2023 +KernelVersion: v6.7 +Contact: linux-coco@lists.linux.dev +Description: + (RO) Indicates the minimum permissible value that can be written + to @privlevel. diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2 index 3371c39f65..a2bf4fd82a 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uac2 +++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2 @@ -35,4 +35,6 @@ Description: req_number the number of pre-allocated requests for both capture and playback function_name name of the interface + c_terminal_type code of the capture terminal type + p_terminal_type code of the playback terminal type ===================== ======================================= diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index df53578005..042fd125fb 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -1,4 +1,4 @@ -What: /sys/kernel/debug/habanalabs/hl<n>/addr +What: /sys/kernel/debug/accel/<n>/addr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -8,34 +8,34 @@ Description: Sets the device address to be used for read or write through only when the IOMMU is disabled. The acceptable value is a string that starts with "0x" -What: /sys/kernel/debug/habanalabs/hl<n>/clk_gate +What: /sys/kernel/debug/accel/<n>/clk_gate Date: May 2020 KernelVersion: 5.8 Contact: ogabbay@kernel.org Description: This setting is now deprecated as clock gating is handled solely by the f/w -What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers +What: /sys/kernel/debug/accel/<n>/command_buffers Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with information about the currently allocated command buffers -What: /sys/kernel/debug/habanalabs/hl<n>/command_submission +What: /sys/kernel/debug/accel/<n>/command_submission Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with information about the currently active command submissions -What: /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs +What: /sys/kernel/debug/accel/<n>/command_submission_jobs Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays a list with detailed information about each JOB (CB) of each active command submission -What: /sys/kernel/debug/habanalabs/hl<n>/data32 +What: /sys/kernel/debug/accel/<n>/data32 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -50,7 +50,7 @@ Description: Allows the root user to read or write directly through the If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory -What: /sys/kernel/debug/habanalabs/hl<n>/data64 +What: /sys/kernel/debug/accel/<n>/data64 Date: Jan 2020 KernelVersion: 5.6 Contact: ogabbay@kernel.org @@ -65,7 +65,7 @@ Description: Allows the root user to read or write 64 bit data directly If the IOMMU is disabled, it also allows the root user to read or write from the host a device VA of a host mapped memory -What: /sys/kernel/debug/habanalabs/hl<n>/data_dma +What: /sys/kernel/debug/accel/<n>/data_dma Date: Apr 2021 KernelVersion: 5.13 Contact: ogabbay@kernel.org @@ -79,11 +79,11 @@ Description: Allows the root user to read from the device's internal a very long time. This interface doesn't support concurrency in the same device. In GAUDI and GOYA, this action can cause undefined behavior - in case the it is done while the device is executing user + in case it is done while the device is executing user workloads. Only supported on GAUDI at this stage. -What: /sys/kernel/debug/habanalabs/hl<n>/device +What: /sys/kernel/debug/accel/<n>/device Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -91,14 +91,14 @@ Description: Enables the root user to set the device to specific state. Valid values are "disable", "enable", "suspend", "resume". User can read this property to see the valid values -What: /sys/kernel/debug/habanalabs/hl<n>/device_release_watchdog_timeout +What: /sys/kernel/debug/accel/<n>/device_release_watchdog_timeout Date: Oct 2022 KernelVersion: 6.2 Contact: ttayar@habana.ai Description: The watchdog timeout value in seconds for a device release upon certain error cases, after which the device is reset. -What: /sys/kernel/debug/habanalabs/hl<n>/dma_size +What: /sys/kernel/debug/accel/<n>/dma_size Date: Apr 2021 KernelVersion: 5.13 Contact: ogabbay@kernel.org @@ -108,7 +108,7 @@ Description: Specify the size of the DMA transaction when using DMA to read When the write is finished, the user can read the "data_dma" blob -What: /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events +What: /sys/kernel/debug/accel/<n>/dump_razwi_events Date: Aug 2022 KernelVersion: 5.20 Contact: fkassabri@habana.ai @@ -117,7 +117,7 @@ Description: Dumps all razwi events to dmesg if exist. the routine will clear the status register. Usage: cat dump_razwi_events -What: /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations +What: /sys/kernel/debug/accel/<n>/dump_security_violations Date: Jan 2021 KernelVersion: 5.12 Contact: ogabbay@kernel.org @@ -125,14 +125,14 @@ Description: Dumps all security violations to dmesg. This will also ack all security violations meanings those violations will not be dumped next time user calls this API -What: /sys/kernel/debug/habanalabs/hl<n>/engines +What: /sys/kernel/debug/accel/<n>/engines Date: Jul 2019 KernelVersion: 5.3 Contact: ogabbay@kernel.org Description: Displays the status registers values of the device engines and their derived idle status -What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr +What: /sys/kernel/debug/accel/<n>/i2c_addr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -140,7 +140,7 @@ Description: Sets I2C device address for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/i2c_bus +What: /sys/kernel/debug/accel/<n>/i2c_bus Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -148,7 +148,7 @@ Description: Sets I2C bus address for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/i2c_data +What: /sys/kernel/debug/accel/<n>/i2c_data Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -157,7 +157,7 @@ Description: Triggers an I2C transaction that is generated by the device's reading from the file generates a read transaction, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/i2c_len +What: /sys/kernel/debug/accel/<n>/i2c_len Date: Dec 2021 KernelVersion: 5.17 Contact: obitton@habana.ai @@ -165,7 +165,7 @@ Description: Sets I2C length in bytes for I2C transaction that is generated b the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/i2c_reg +What: /sys/kernel/debug/accel/<n>/i2c_reg Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -173,35 +173,35 @@ Description: Sets I2C register id for I2C transaction that is generated by the device's CPU, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/led0 +What: /sys/kernel/debug/accel/<n>/led0 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the first S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/led1 +What: /sys/kernel/debug/accel/<n>/led1 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the second S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/led2 +What: /sys/kernel/debug/accel/<n>/led2 Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the state of the third S/W led on the device, Not available when device is loaded with secured firmware -What: /sys/kernel/debug/habanalabs/hl<n>/memory_scrub +What: /sys/kernel/debug/accel/<n>/memory_scrub Date: May 2022 KernelVersion: 5.19 Contact: dhirschfeld@habana.ai Description: Allows the root user to scrub the dram memory. The scrubbing value can be set using the debugfs file memory_scrub_val. -What: /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val +What: /sys/kernel/debug/accel/<n>/memory_scrub_val Date: May 2022 KernelVersion: 5.19 Contact: dhirschfeld@habana.ai @@ -209,7 +209,7 @@ Description: The value to which the dram will be set to when the user scrubs the dram using 'memory_scrub' debugfs file and the scrubbing value when using module param 'memory_scrub' -What: /sys/kernel/debug/habanalabs/hl<n>/mmu +What: /sys/kernel/debug/accel/<n>/mmu Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -217,19 +217,19 @@ Description: Displays the hop values and physical address for a given ASID and virtual address. The user should write the ASID and VA into the file and then read the file to get the result. e.g. to display info about VA 0x1000 for ASID 1 you need to do: - echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu + echo "1 0x1000" > /sys/kernel/debug/accel/0/mmu -What: /sys/kernel/debug/habanalabs/hl<n>/mmu_error +What: /sys/kernel/debug/accel/<n>/mmu_error Date: Mar 2021 KernelVersion: 5.12 Contact: fkassabri@habana.ai Description: Check and display page fault or access violation mmu errors for all MMUs specified in mmu_cap_mask. e.g. to display error info for MMU hw cap bit 9, you need to do: - echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error - cat /sys/kernel/debug/habanalabs/hl0/mmu_error + echo "0x200" > /sys/kernel/debug/accel/0/mmu_error + cat /sys/kernel/debug/accel/0/mmu_error -What: /sys/kernel/debug/habanalabs/hl<n>/monitor_dump +What: /sys/kernel/debug/accel/<n>/monitor_dump Date: Mar 2022 KernelVersion: 5.19 Contact: osharabi@habana.ai @@ -243,7 +243,7 @@ Description: Allows the root user to dump monitors status from the device's This interface doesn't support concurrency in the same device. Only supported on GAUDI. -What: /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig +What: /sys/kernel/debug/accel/<n>/monitor_dump_trig Date: Mar 2022 KernelVersion: 5.19 Contact: osharabi@habana.ai @@ -253,14 +253,14 @@ Description: Triggers dump of monitor data. The value to trigger the operatio When the write is finished, the user can read the "monitor_dump" blob -What: /sys/kernel/debug/habanalabs/hl<n>/set_power_state +What: /sys/kernel/debug/accel/<n>/set_power_state Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Sets the PCI power state. Valid values are "1" for D0 and "2" for D3Hot -What: /sys/kernel/debug/habanalabs/hl<n>/skip_reset_on_timeout +What: /sys/kernel/debug/accel/<n>/skip_reset_on_timeout Date: Jun 2021 KernelVersion: 5.13 Contact: ynudelman@habana.ai @@ -268,7 +268,7 @@ Description: Sets the skip reset on timeout option for the device. Value of "0" means device will be reset in case some CS has timed out, otherwise it will not be reset. -What: /sys/kernel/debug/habanalabs/hl<n>/state_dump +What: /sys/kernel/debug/accel/<n>/state_dump Date: Oct 2021 KernelVersion: 5.15 Contact: ynudelman@habana.ai @@ -279,7 +279,7 @@ Description: Gets the state dump occurring on a CS timeout or failure. Writing an integer X discards X state dumps, so that the next read would return X+1-st newest state dump. -What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err +What: /sys/kernel/debug/accel/<n>/stop_on_err Date: Mar 2020 KernelVersion: 5.6 Contact: ogabbay@kernel.org @@ -287,21 +287,21 @@ Description: Sets the stop-on_error option for the device engines. Value of "0" is for disable, otherwise enable. Relevant only for GOYA and GAUDI. -What: /sys/kernel/debug/habanalabs/hl<n>/timeout_locked +What: /sys/kernel/debug/accel/<n>/timeout_locked Date: Sep 2021 KernelVersion: 5.16 Contact: obitton@habana.ai Description: Sets the command submission timeout value in seconds. -What: /sys/kernel/debug/habanalabs/hl<n>/userptr +What: /sys/kernel/debug/accel/<n>/userptr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org -Description: Displays a list with information about the currently user +Description: Displays a list with information about the current user pointers (user virtual addresses) that are pinned and mapped to DMA addresses -What: /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup +What: /sys/kernel/debug/accel/<n>/userptr_lookup Date: Oct 2021 KernelVersion: 5.15 Contact: ogabbay@kernel.org @@ -309,7 +309,7 @@ Description: Allows to search for specific user pointers (user virtual addresses) that are pinned and mapped to DMA addresses, and see their resolution to the specific dma address. -What: /sys/kernel/debug/habanalabs/hl<n>/vm +What: /sys/kernel/debug/accel/<n>/vm Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org diff --git a/Documentation/ABI/testing/debugfs-driver-qat b/Documentation/ABI/testing/debugfs-driver-qat index 6731ffacc5..b2db010d85 100644 --- a/Documentation/ABI/testing/debugfs-driver-qat +++ b/Documentation/ABI/testing/debugfs-driver-qat @@ -1,4 +1,4 @@ -What: /sys/kernel/debug/qat_<device>_<BDF>/qat/fw_counters +What: /sys/kernel/debug/qat_<device>_<BDF>/fw_counters Date: November 2023 KernelVersion: 6.6 Contact: qat-linux@intel.com @@ -59,3 +59,25 @@ Description: (RO) Read returns the device health status. The driver does not monitor for Heartbeat. It is left for a user to poll the status periodically. + +What: /sys/kernel/debug/qat_<device>_<BDF>/pm_status +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (RO) Read returns power management information specific to the + QAT device. + + This attribute is only available for qat_4xxx devices. + +What: /sys/kernel/debug/qat_<device>_<BDF>/cnv_errors +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (RO) Read returns, for each Acceleration Engine (AE), the number + of errors and the type of the last error detected by the device + when performing verified compression. + Reported counters:: + + <N>: Number of Compress and Verify (CnV) errors and type + of the last CnV error detected by Acceleration + Engine N. diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx index 7af477f499..8c067ff99e 100644 --- a/Documentation/ABI/testing/sysfs-bus-cdx +++ b/Documentation/ABI/testing/sysfs-bus-cdx @@ -28,14 +28,57 @@ Description: of a device manufacturer. Combination of Vendor ID and Device ID identifies a device. +What: /sys/bus/cdx/devices/.../subsystem_vendor +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Vendor ID for this CDX device, in hexadecimal. + Subsystem Vendor ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../subsystem_device +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + Subsystem Device ID for this CDX device, in hexadecimal + Subsystem Device ID is 16 bit identifier specific to the + card manufacturer. + +What: /sys/bus/cdx/devices/.../class +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the class of the CDX device, in hexadecimal. + Class is 24 bit identifier specifies the functionality of the device. + +What: /sys/bus/cdx/devices/.../revision +Date: July 2023 +Contact: puneet.gupta@amd.com +Description: + This file contains the revision field of the CDX device, in hexadecimal. + Revision is 8 bit revision identifier of the device. + +What: /sys/bus/cdx/devices/.../enable +Date: October 2023 +Contact: abhijit.gangurde@amd.com +Description: + CDX bus should be disabled before updating the devices in FPGA. + Writing n/0/off will attempt to disable the CDX bus and. + writing y/1/on will attempt to enable the CDX bus. Reading this file + gives the current state of the bus, 1 for enabled and 0 for disabled. + + For example:: + + # echo 1 > /sys/bus/cdx/.../enable + What: /sys/bus/cdx/devices/.../reset Date: March 2023 Contact: nipun.gupta@amd.com Description: - Writing y/1/on to this file resets the CDX device. - On resetting the device, the corresponding driver is notified - twice, once before the device is being reset, and again after - the reset has been complete. + Writing y/1/on to this file resets the CDX device or all devices + on the bus. On resetting the device, the corresponding driver is + notified twice, once before the device is being reset, and again + after the reset has been complete. For example:: @@ -54,3 +97,18 @@ Description: For example:: # echo 1 > /sys/bus/cdx/devices/.../remove + +What: /sys/bus/cdx/devices/.../modalias +Date: July 2023 +Contact: nipun.gupta@amd.com +Description: + This attribute indicates the CDX ID of the device. + That is in the format: + cdx:vXXXXdXXXXsvXXXXsdXXXXcXXXXXX, + where: + + - vXXXX contains the vendor ID; + - dXXXX contains the device ID; + - svXXXX contains the subsystem vendor ID; + - sdXXXX contains the subsystem device ID; + - cXXXXXX contains the device class. diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 087f762ebf..e76c360060 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -178,6 +178,21 @@ Description: hardware decoder target list. +What: /sys/bus/cxl/devices/portX/decoders_committed +Date: October, 2023 +KernelVersion: v6.7 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) A memory device is considered active when any of its + decoders are in the "committed" state (See CXL 3.0 8.2.4.19.7 + CXL HDM Decoder n Control Register). Hotplug and destructive + operations like "sanitize" are blocked while device is actively + decoding a Host Physical Address range. Note that this number + may be elevated without any regionX objects active or even + enumerated, as this may be due to decoders established by + platform firwmare or a previous kernel (kexec). + + What: /sys/bus/cxl/devices/decoderX.Y Date: June, 2021 KernelVersion: v5.14 @@ -369,6 +384,21 @@ Description: provided it is currently idle / not bound to a driver. +What: /sys/bus/cxl/devices/decoderX.Y/qos_class +Date: May, 2023 +KernelVersion: v6.5 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) For CXL host platforms that support "QoS Telemmetry" this + root-decoder-only attribute conveys a platform specific cookie + that identifies a QoS performance class for the CXL Window. + This class-id can be compared against a similar "qos_class" + published for each memory-type that an endpoint supports. While + it is not required that endpoints map their local memory-class + to a matching platform class, mismatches are not recommended and + there are platform specific side-effects that may result. + + What: /sys/bus/cxl/devices/regionZ/uuid Date: May, 2022 KernelVersion: v6.0 diff --git a/Documentation/ABI/testing/sysfs-bus-i3c b/Documentation/ABI/testing/sysfs-bus-i3c index 1f4a266233..e5248fd67a 100644 --- a/Documentation/ABI/testing/sysfs-bus-i3c +++ b/Documentation/ABI/testing/sysfs-bus-i3c @@ -67,7 +67,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/pid KernelVersion: 5.0 Contact: linux-i3c@vger.kernel.org Description: - PID stands for Provisional ID and is used to uniquely identify + PID stands for Provisioned ID and is used to uniquely identify a device on a bus. This PID contains information about the vendor, the part and an instance ID so that several devices of the same type can be connected on the same bus. @@ -123,7 +123,7 @@ What: /sys/bus/i3c/devices/i3c-<bus-id>/<bus-id>-<device-pid>/pid KernelVersion: 5.0 Contact: linux-i3c@vger.kernel.org Description: - PID stands for Provisional ID and is used to uniquely identify + PID stands for Provisioned ID and is used to uniquely identify a device on a bus. This PID contains information about the vendor, the part and an instance ID so that several devices of the same type can be connected on the same bus. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a2854dc9a8..19cde14f38 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -279,6 +279,35 @@ Description: but should match other such assignments on device). Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + Angular displacement between two consecutive samples on x, y or + z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total angular displacement during a + desired period of time, the application should sum-up the delta + angle samples acquired during that time. + Units after application of scale and offset are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw +KernelVersion: 6.5 +Contact: linux-iio@vger.kernel.org +Description: + The linear velocity change between two consecutive samples on x, + y or z (may be arbitrarily assigned but should match other such + assignments on device). + In order to compute the total linear velocity change during a + desired period of time, the application should sum-up the delta + velocity samples acquired during that time. + Units after application of scale and offset are meters per + second. + What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw KernelVersion: 4.17 @@ -461,6 +490,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale +What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale @@ -1332,6 +1363,12 @@ Description: What: /sys/.../iio:deviceX/bufferY/in_accel_x_en What: /sys/.../iio:deviceX/bufferY/in_accel_y_en What: /sys/.../iio:deviceX/bufferY/in_accel_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en @@ -1362,6 +1399,8 @@ Description: Scan element control for triggered data capture. What: /sys/.../iio:deviceX/bufferY/in_accel_type +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type What: /sys/.../iio:deviceX/bufferY/in_anglvel_type What: /sys/.../iio:deviceX/bufferY/in_magn_type What: /sys/.../iio:deviceX/bufferY/in_incli_type @@ -1416,6 +1455,12 @@ What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index What: /sys/.../iio:deviceX/bufferY/in_accel_x_index What: /sys/.../iio:deviceX/bufferY/in_accel_y_index What: /sys/.../iio:deviceX/bufferY/in_accel_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index +What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index @@ -2179,3 +2224,33 @@ Contact: linux-iio@vger.kernel.org Description: Number of conditions that must occur, during a running period, before an event is generated. + +What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Represents light color temperature, which measures light color + temperature in Kelvin. + +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + The x and y light color coordinate on the CIE 1931 chromaticity + diagram. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label +What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Optional symbolic label to a device channel event. + If a label is defined for this event add that to the event + specific attributes. This is useful for userspace to be able to + better identify an individual event. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 new file mode 100644 index 0000000000..b168aa44b2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 @@ -0,0 +1,53 @@ +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to set the gain of the biasing current + circuit of the Delta-Sigma modulator. The different BOOST + settings are applied to the entire modulator circuit, including + the voltage reference buffers. + +What: /sys/bus/iio/devices/iio:deviceX/boost_current_gain_available +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible gain values for + the current biasing circuit of the Delta-Sigma modulator. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_mux_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the analog input multiplexer + auto-zeroing algorithm (the input multiplexer and the ADC + include an offset cancellation algorithm that cancels the offset + contribution of the ADC). When the offset cancellation algorithm + is enabled, ADC takes two conversions, one with the differential + input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the + conversion time is multiplied by two compared to the default + case where the algorithm is disabled. This technique allows the + cancellation of the ADC offset error and the achievement of + ultra-low offset without any digital calibration. The resulting + offset is the residue of the difference between the two + conversions, which is on the order of magnitude of the noise + floor. This offset is effectively canceled at every conversion, + so the residual offset error temperature drift is extremely low. + Write '1' to enable it, write '0' to disable it. + +What: /sys/bus/iio/devices/iio:deviceX/auto_zeroing_ref_enable +KernelVersion: 6.4 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to enable the chopping algorithm for the + internal voltage reference buffer. This setting has no effect + when external voltage reference is selected. + Internal voltage reference buffer injects a certain quantity of + 1/f noise into the system that can be modulated with the + incoming input signals and can limit the SNR performance at + higher Oversampling Ratio values (over 256). To overcome this + limitation, the buffer includes an auto-zeroing algorithm that + greatly reduces (cancels out) the 1/f noise and cancels the + offset value of the reference buffer. As a result, the SNR of + the system is not affected by this 1/f noise component of the + reference buffer, even at maximum oversampling ratio values. + Write '1' to enable it, write '0' to disable it. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 new file mode 100644 index 0000000000..f92c79342b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-resolver-ad2s1210 @@ -0,0 +1,27 @@ +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Maximum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_max_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_max. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the current Degradation of Signal Reset Minimum + Threshold value in millivolts. Writing sets the value. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltage0_mag_rising_reset_min_available +KernelVersion: 6.7 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the allowable voltage range for + in_altvoltage0_mag_rising_reset_min. diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem index 46cfe02058..34ee8c59ab 100644 --- a/Documentation/ABI/testing/sysfs-bus-papr-pmem +++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem @@ -8,7 +8,7 @@ Description: more bits set in the dimm-health-bitmap retrieved in response to H_SCM_HEALTH hcall. The details of the bit flags returned in response to this hcall is available - at 'Documentation/powerpc/papr_hcalls.rst' . Below are + at 'Documentation/arch/powerpc/papr_hcalls.rst' . Below are the flags reported in this sysfs file: * "not_armed" diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index a44bfe0200..2b7108e219 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -313,6 +313,15 @@ Description: Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per direction. Devices before USB 3.2 are single lane (tx_lanes = 1) +What: /sys/bus/usb/devices/.../typec +Date: November 2023 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Symlink to the USB Type-C partner device. USB Type-C partner + represents the component that communicates over the + Configuration Channel (CC signal on USB Type-C connectors and + cables) with the local port. + What: /sys/bus/usb/devices/usbX/bAlternateSetting Description: The current interface alternate setting number, in decimal. diff --git a/Documentation/ABI/testing/sysfs-bus-vdpa b/Documentation/ABI/testing/sysfs-bus-vdpa index 28a6111202..4da53878bf 100644 --- a/Documentation/ABI/testing/sysfs-bus-vdpa +++ b/Documentation/ABI/testing/sysfs-bus-vdpa @@ -1,4 +1,4 @@ -What: /sys/bus/vdpa/driver_autoprobe +What: /sys/bus/vdpa/drivers_autoprobe Date: March 2020 Contact: virtualization@lists.linux-foundation.org Description: @@ -17,7 +17,7 @@ Description: Writing a device name to this file will cause the kernel binds devices to a compatible driver. - This can be useful when /sys/bus/vdpa/driver_autoprobe is + This can be useful when /sys/bus/vdpa/drivers_autoprobe is disabled. What: /sys/bus/vdpa/drivers/.../bind diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index f205d39409..9c82c7b42f 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -383,6 +383,36 @@ Description: Note that any changes to this attribute requires a reboot for changes to take effect. +What: /sys/class/firmware-attributes/*/attributes/save_settings +Date: August 2023 +KernelVersion: 6.6 +Contact: Mark Pearson <mpearson-lenovo@squebb.ca> +Description: + On Lenovo platforms there is a limitation in the number of times an attribute can be + saved. This is an architectural limitation and it limits the number of attributes + that can be modified to 48. + A solution for this is instead of the attribute being saved after every modification, + to allow a user to bulk set the attributes, and then trigger a final save. This allows + unlimited attributes. + + Read the attribute to check what save mode is enabled (single or bulk). + E.g: + # cat /sys/class/firmware-attributes/thinklmi/attributes/save_settings + single + + Write the attribute with 'bulk' to enable bulk save mode. + Write the attribute with 'single' to enable saving, after every attribute set. + The default setting is single mode. + E.g: + # echo bulk > /sys/class/firmware-attributes/thinklmi/attributes/save_settings + + When in bulk mode write 'save' to trigger a save of all currently modified attributes. + Note, once a save has been triggered, in bulk mode, attributes can no longer be set and + will return a permissions error. This is to prevent users hitting the 48+ save limitation + (which requires entering the BIOS to clear the error condition) + E.g: + # echo save > /sys/class/firmware-attributes/thinklmi/attributes/save_settings + What: /sys/class/firmware-attributes/*/attributes/debug_cmd Date: July 2021 KernelVersion: 5.14 diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia index c4d46970c1..369b4ae8be 100644 --- a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia +++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia @@ -12,3 +12,17 @@ Description: (RW) On the front panel of the Turris Omnia router there is also able to change this setting from software. Format: %i + +What: /sys/class/leds/<led>/device/gamma_correction +Date: August 2023 +KernelVersion: 6.6 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) Newer versions of the microcontroller firmware of the + Turris Omnia router support gamma correction for the RGB LEDs. + This feature can be enabled/disabled by writing to this file. + + If the feature is not supported because the MCU firmware is too + old, the file always reads as 0, and writing to the file results + in the EOPNOTSUPP error. + + Format: %i diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues index 906ff3ca92..5bff64d256 100644 --- a/Documentation/ABI/testing/sysfs-class-net-queues +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_cpus Date: March 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -8,7 +8,7 @@ Description: network device queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt +What: /sys/class/net/<iface>/queues/rx-<queue>/rps_flow_cnt Date: April 2010 KernelVersion: 2.6.35 Contact: netdev@vger.kernel.org @@ -16,7 +16,7 @@ Description: Number of Receive Packet Steering flows being currently processed by this particular network device receive queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_timeout Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -24,7 +24,7 @@ Description: Indicates the number of transmit timeout events seen by this network interface transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +What: /sys/class/net/<iface>/queues/tx-<queue>/tx_maxrate Date: March 2015 KernelVersion: 4.1 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: A Mbps max-rate set for the queue, a value of zero means disabled, default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_cpus Date: November 2010 KernelVersion: 2.6.38 Contact: netdev@vger.kernel.org @@ -42,7 +42,7 @@ Description: network device transmit queue. Possible values depend on the number of available CPU(s) in the system. -What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs +What: /sys/class/net/<iface>/queues/tx-<queue>/xps_rxqs Date: June 2018 KernelVersion: 4.18.0 Contact: netdev@vger.kernel.org @@ -53,7 +53,7 @@ Description: number of available receive queue(s) in the network device. Default is disabled. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -62,7 +62,7 @@ Description: of this particular network device transmit queue. Default value is 1000. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/inflight Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -70,7 +70,7 @@ Description: Indicates the number of bytes (objects) in flight on this network device transmit queue. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -79,7 +79,7 @@ Description: on this network device transmit queue. This value is clamped to be within the bounds defined by limit_max and limit_min. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org @@ -88,7 +88,7 @@ Description: queued on this network device transmit queue. See include/linux/dynamic_queue_limits.h for the default value. -What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min +What: /sys/class/net/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min Date: November 2011 KernelVersion: 3.3 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics index 55db278153..53e508c693 100644 --- a/Documentation/ABI/testing/sysfs-class-net-statistics +++ b/Documentation/ABI/testing/sysfs-class-net-statistics @@ -1,4 +1,4 @@ -What: /sys/class/<iface>/statistics/collisions +What: /sys/class/net/<iface>/statistics/collisions Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -6,7 +6,7 @@ Description: Indicates the number of collisions seen by this network device. This value might not be relevant with all MAC layers. -What: /sys/class/<iface>/statistics/multicast +What: /sys/class/net/<iface>/statistics/multicast Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -14,7 +14,7 @@ Description: Indicates the number of multicast packets received by this network device. -What: /sys/class/<iface>/statistics/rx_bytes +What: /sys/class/net/<iface>/statistics/rx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -23,7 +23,7 @@ Description: See the network driver for the exact meaning of when this value is incremented. -What: /sys/class/<iface>/statistics/rx_compressed +What: /sys/class/net/<iface>/statistics/rx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -32,7 +32,7 @@ Description: network device. This value might only be relevant for interfaces that support packet compression (e.g: PPP). -What: /sys/class/<iface>/statistics/rx_crc_errors +What: /sys/class/net/<iface>/statistics/rx_crc_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -41,7 +41,7 @@ Description: by this network device. Note that the specific meaning might depend on the MAC layer used by the interface. -What: /sys/class/<iface>/statistics/rx_dropped +What: /sys/class/net/<iface>/statistics/rx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -51,7 +51,7 @@ Description: packet processing. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_errors +What: /sys/class/net/<iface>/statistics/rx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -59,7 +59,7 @@ Description: Indicates the number of receive errors on this network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_fifo_errors +What: /sys/class/net/<iface>/statistics/rx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -68,7 +68,7 @@ Description: network device. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_frame_errors +What: /sys/class/net/<iface>/statistics/rx_frame_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -78,7 +78,7 @@ Description: on the MAC layer protocol used. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_length_errors +What: /sys/class/net/<iface>/statistics/rx_length_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -87,7 +87,7 @@ Description: error, oversized or undersized. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_missed_errors +What: /sys/class/net/<iface>/statistics/rx_missed_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -96,7 +96,7 @@ Description: due to lack of capacity in the receive side. See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_nohandler +What: /sys/class/net/<iface>/statistics/rx_nohandler Date: February 2016 KernelVersion: 4.6 Contact: netdev@vger.kernel.org @@ -104,7 +104,7 @@ Description: Indicates the number of received packets that were dropped on an inactive device by the network core. -What: /sys/class/<iface>/statistics/rx_over_errors +What: /sys/class/net/<iface>/statistics/rx_over_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -114,7 +114,7 @@ Description: (e.g: larger than MTU). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/rx_packets +What: /sys/class/net/<iface>/statistics/rx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -122,7 +122,7 @@ Description: Indicates the total number of good packets received by this network device. -What: /sys/class/<iface>/statistics/tx_aborted_errors +What: /sys/class/net/<iface>/statistics/tx_aborted_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -132,7 +132,7 @@ Description: a medium collision). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_bytes +What: /sys/class/net/<iface>/statistics/tx_bytes Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -143,7 +143,7 @@ Description: transmitted packets or all packets that have been queued for transmission. -What: /sys/class/<iface>/statistics/tx_carrier_errors +What: /sys/class/net/<iface>/statistics/tx_carrier_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -152,7 +152,7 @@ Description: because of carrier errors (e.g: physical link down). See the network driver for the exact meaning of this value. -What: /sys/class/<iface>/statistics/tx_compressed +What: /sys/class/net/<iface>/statistics/tx_compressed Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -161,7 +161,7 @@ Description: this might only be relevant for devices that support compression (e.g: PPP). -What: /sys/class/<iface>/statistics/tx_dropped +What: /sys/class/net/<iface>/statistics/tx_dropped Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -170,7 +170,7 @@ Description: See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_errors +What: /sys/class/net/<iface>/statistics/tx_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -179,7 +179,7 @@ Description: a network device. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_fifo_errors +What: /sys/class/net/<iface>/statistics/tx_fifo_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -188,7 +188,7 @@ Description: FIFO error. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_heartbeat_errors +What: /sys/class/net/<iface>/statistics/tx_heartbeat_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -197,7 +197,7 @@ Description: reported as heartbeat errors. See the driver for the exact reasons as to why the packets were dropped. -What: /sys/class/<iface>/statistics/tx_packets +What: /sys/class/net/<iface>/statistics/tx_packets Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org @@ -206,7 +206,7 @@ Description: device. See the driver for whether this reports the number of all attempted or successful transmissions. -What: /sys/class/<iface>/statistics/tx_window_errors +What: /sys/class/net/<iface>/statistics/tx_window_errors Date: April 2005 KernelVersion: 2.6.12 Contact: netdev@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery index 1bf9d1d790..61d233c320 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_power_delivery +++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery @@ -124,6 +124,13 @@ Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> Description: The voltage the supply supports in millivolts. +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/peak_current +Date: October 2023 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the Fixed Power Source Peak Current + Capability field. + What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current Date: May 2022 Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 7ecd5c8161..a1db6db475 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -354,9 +354,6 @@ Description: Parameters for the CPU cache attributes - ReadWriteAllocate: both writeallocate and readallocate - attributes: - LEGACY used only on IA64 and is same as write_policy - coherency_line_size: the minimum amount of data in bytes that gets transferred from memory to cache diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 1b98b6503b..c63ca1ad50 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -1,4 +1,4 @@ -What: /sys/class/habanalabs/hl<n>/armcp_kernel_ver +What: /sys/class/accel/accel<n>/device/armcp_kernel_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -6,7 +6,7 @@ Description: Version of the Linux kernel running on the device's CPU. Will be DEPRECATED in Linux kernel version 5.10, and be replaced with cpucp_kernel_ver -What: /sys/class/habanalabs/hl<n>/armcp_ver +What: /sys/class/accel/accel<n>/device/armcp_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -14,7 +14,7 @@ Description: Version of the application running on the device's CPU Will be DEPRECATED in Linux kernel version 5.10, and be replaced with cpucp_ver -What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz +What: /sys/class/accel/accel<n>/device/clk_max_freq_mhz Date: Jun 2019 KernelVersion: 5.7 Contact: ogabbay@kernel.org @@ -24,58 +24,58 @@ Description: Allows the user to set the maximum clock frequency, in MHz. frequency value of the device clock. This property is valid only for the Gaudi ASIC family -What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz +What: /sys/class/accel/accel<n>/device/clk_cur_freq_mhz Date: Jun 2019 KernelVersion: 5.7 Contact: ogabbay@kernel.org Description: Displays the current frequency, in MHz, of the device clock. This property is valid only for the Gaudi ASIC family -What: /sys/class/habanalabs/hl<n>/cpld_ver +What: /sys/class/accel/accel<n>/device/cpld_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the Device's CPLD F/W -What: /sys/class/habanalabs/hl<n>/cpucp_kernel_ver +What: /sys/class/accel/accel<n>/device/cpucp_kernel_ver Date: Oct 2020 KernelVersion: 5.10 Contact: ogabbay@kernel.org Description: Version of the Linux kernel running on the device's CPU -What: /sys/class/habanalabs/hl<n>/cpucp_ver +What: /sys/class/accel/accel<n>/device/cpucp_ver Date: Oct 2020 KernelVersion: 5.10 Contact: ogabbay@kernel.org Description: Version of the application running on the device's CPU -What: /sys/class/habanalabs/hl<n>/device_type +What: /sys/class/accel/accel<n>/device/device_type Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the code name of the device according to its type. The supported values are: "GOYA" -What: /sys/class/habanalabs/hl<n>/eeprom +What: /sys/class/accel/accel<n>/device/eeprom Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: A binary file attribute that contains the contents of the on-board EEPROM -What: /sys/class/habanalabs/hl<n>/fuse_ver +What: /sys/class/accel/accel<n>/device/fuse_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the device's version from the eFuse -What: /sys/class/habanalabs/hl<n>/fw_os_ver +What: /sys/class/accel/accel<n>/device/fw_os_ver Date: Dec 2021 KernelVersion: 5.18 Contact: ogabbay@kernel.org Description: Version of the firmware OS running on the device's CPU -What: /sys/class/habanalabs/hl<n>/hard_reset +What: /sys/class/accel/accel<n>/device/hard_reset Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -83,14 +83,14 @@ Description: Interface to trigger a hard-reset operation for the device. Hard-reset will reset ALL internal components of the device except for the PCI interface and the internal PLLs -What: /sys/class/habanalabs/hl<n>/hard_reset_cnt +What: /sys/class/accel/accel<n>/device/hard_reset_cnt Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays how many times the device have undergone a hard-reset operation since the driver was loaded -What: /sys/class/habanalabs/hl<n>/high_pll +What: /sys/class/accel/accel<n>/device/high_pll Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -98,7 +98,7 @@ Description: Allows the user to set the maximum clock frequency for MME, TPC and IC when the power management profile is set to "automatic". This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/ic_clk +What: /sys/class/accel/accel<n>/device/ic_clk Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -110,27 +110,27 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of frequency value of the IC. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/ic_clk_curr +What: /sys/class/accel/accel<n>/device/ic_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the Interconnect fabric. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/infineon_ver +What: /sys/class/accel/accel<n>/device/infineon_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI -What: /sys/class/habanalabs/hl<n>/max_power +What: /sys/class/accel/accel<n>/device/max_power Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Allows the user to set the maximum power consumption of the device in milliwatts. -What: /sys/class/habanalabs/hl<n>/mme_clk +What: /sys/class/accel/accel<n>/device/mme_clk Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -142,21 +142,21 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of frequency value of the MME. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/mme_clk_curr +What: /sys/class/accel/accel<n>/device/mme_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the MME compute engine. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/pci_addr +What: /sys/class/accel/accel<n>/device/pci_addr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the PCI address of the device. This is needed so the user would be able to open a device based on its PCI address -What: /sys/class/habanalabs/hl<n>/pm_mng_profile +What: /sys/class/accel/accel<n>/device/pm_mng_profile Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -170,19 +170,19 @@ Description: Power management profile. Values are "auto", "manual". In "auto" ic_clk, mme_clk and tpc_clk. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/preboot_btl_ver +What: /sys/class/accel/accel<n>/device/preboot_btl_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the device's preboot F/W code -What: /sys/class/habanalabs/hl<n>/security_enabled +What: /sys/class/accel/accel<n>/device/security_enabled Date: Oct 2022 KernelVersion: 6.1 Contact: obitton@habana.ai Description: Displays the device's security status -What: /sys/class/habanalabs/hl<n>/soft_reset +What: /sys/class/accel/accel<n>/device/soft_reset Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -190,14 +190,14 @@ Description: Interface to trigger a soft-reset operation for the device. Soft-reset will reset only the compute and DMA engines of the device -What: /sys/class/habanalabs/hl<n>/soft_reset_cnt +What: /sys/class/accel/accel<n>/device/soft_reset_cnt Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays how many times the device have undergone a soft-reset operation since the driver was loaded -What: /sys/class/habanalabs/hl<n>/status +What: /sys/class/accel/accel<n>/device/status Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -215,13 +215,13 @@ Description: Status of the card: a compute-reset which is executed after a device release (relevant for Gaudi2 only). -What: /sys/class/habanalabs/hl<n>/thermal_ver +What: /sys/class/accel/accel<n>/device/thermal_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the Device's thermal daemon -What: /sys/class/habanalabs/hl<n>/tpc_clk +What: /sys/class/accel/accel<n>/device/tpc_clk Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org @@ -233,20 +233,20 @@ Description: Allows the user to set the maximum clock frequency, in Hz, of frequency value of the TPC. This property is valid only for Goya ASIC family -What: /sys/class/habanalabs/hl<n>/tpc_clk_curr +What: /sys/class/accel/accel<n>/device/tpc_clk_curr Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Displays the current clock frequency, in Hz, of the TPC compute engines. This property is valid only for the Goya ASIC family -What: /sys/class/habanalabs/hl<n>/uboot_ver +What: /sys/class/accel/accel<n>/device/uboot_ver Date: Jan 2019 KernelVersion: 5.1 Contact: ogabbay@kernel.org Description: Version of the u-boot running on the device's CPU -What: /sys/class/habanalabs/hl<n>/vrm_ver +What: /sys/class/accel/accel<n>/device/vrm_ver Date: Jan 2022 KernelVersion: 5.17 Contact: ogabbay@kernel.org diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc index a8ab58035c..c12316dfd9 100644 --- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc +++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc @@ -17,7 +17,7 @@ Description: Read only. Returns the firmware version of Intel MAX10 What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_address Date: January 2021 KernelVersion: 5.12 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns the first MAC address in a block of sequential MAC addresses assigned to the board that is managed by the Intel MAX10 BMC. It is stored in @@ -28,7 +28,7 @@ Description: Read only. Returns the first MAC address in a block What: /sys/bus/.../drivers/intel-m10-bmc/.../mac_count Date: January 2021 KernelVersion: 5.12 -Contact: Russ Weight <russell.h.weight@intel.com> +Contact: Peter Colberg <peter.colberg@intel.com> Description: Read only. Returns the number of sequential MAC addresses assigned to the board managed by the Intel MAX10 BMC. This value is stored in FLASH and is mirrored diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index 96834d103a..bbf329cf0d 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -95,3 +95,49 @@ Description: (RW) This configuration option provides a way to force the device i 0 This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/rp2srv +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) This attribute provides a way for a user to query a + specific ring pair for the type of service that it is currently + configured for. + + When written to, the value is cached and used to perform the + read operation. Allowed values are in the range 0 to N-1, where + N is the max number of ring pairs supported by a device. This + can be queried using the attribute qat/num_rps. + + A read returns the service associated to the ring pair queried. + + The values are: + + * dc: the ring pair is configured for running compression services + * sym: the ring pair is configured for running symmetric crypto + services + * asym: the ring pair is configured for running asymmetric crypto + services + + Example usage:: + + # echo 1 > /sys/bus/pci/devices/<BDF>/qat/rp2srv + # cat /sys/bus/pci/devices/<BDF>/qat/rp2srv + sym + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/num_rps +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RO) Returns the number of ring pairs that a single device has. + + Example usage:: + + # cat /sys/bus/pci/devices/<BDF>/qat/num_rps + 64 + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-driver-qat_ras b/Documentation/ABI/testing/sysfs-driver-qat_ras new file mode 100644 index 0000000000..176dea1e9c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-qat_ras @@ -0,0 +1,41 @@ +What: /sys/bus/pci/devices/<BDF>/qat_ras/errors_correctable +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (RO) Reports the number of correctable errors detected by the device. + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (RO) Reports the number of non fatal errors detected by the device. + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (RO) Reports the number of fatal errors detected by the device. + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: (WO) Write to resets all error counters of a device. + + The following example reports how to reset the counters:: + + # echo 1 > /sys/bus/pci/devices/<BDF>/qat_ras/reset_error_counters + # cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_correctable + 0 + # cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_nonfatal + 0 + # cat /sys/bus/pci/devices/<BDF>/qat_ras/errors_fatal + 0 + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-driver-qat_rl b/Documentation/ABI/testing/sysfs-driver-qat_rl new file mode 100644 index 0000000000..8c282ae315 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-qat_rl @@ -0,0 +1,226 @@ +What: /sys/bus/pci/devices/<BDF>/qat_rl/sla_op +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (WO) This attribute is used to perform an operation on an SLA. + The supported operations are: add, update, rm, rm_all, and get. + + Input values must be filled through the associated attribute in + this group before a write to this file. + If the operation completes successfully, the associated + attributes will be updated. + The associated attributes are: cir, pir, srv, rp, and id. + + Supported operations: + + * add: Creates a new SLA with the provided inputs from user. + * Inputs: cir, pir, srv, and rp + * Output: id + + * get: Returns the configuration of the specified SLA in id attribute + * Inputs: id + * Outputs: cir, pir, srv, and rp + + * update: Updates the SLA with new values set in the following attributes + * Inputs: id, cir, and pir + + * rm: Removes the specified SLA in the id attribute. + * Inputs: id + + * rm_all: Removes all the configured SLAs. + * Inputs: None + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/rp +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) When read, reports the current assigned ring pairs for the + queried SLA. + When wrote to, configures the ring pairs associated to a new SLA. + + The value is a 64-bit bit mask and is written/displayed in hex. + Each bit of this mask represents a single ring pair i.e., + bit 1 == ring pair id 0; bit 3 == ring pair id 2. + + Selected ring pairs must to be assigned to a single service, + i.e. the one provided with the srv attribute. The service + assigned to a certain ring pair can be checked by querying + the attribute qat/rp2srv. + + The maximum number of ring pairs is 4 per SLA. + + Applicability in sla_op: + + * WRITE: add operation + * READ: get operation + + Example usage:: + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # cat /sys/bus/pci/devices/<BDF>/qat_rl/rp + 0x5 + + ## Write + # echo 0x5 > /sys/bus/pci/devices/<BDF>/qat_rl/rp + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/id +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) If written to, the value is used to retrieve a particular + SLA and operate on it. + This is valid only for the following operations: update, rm, + and get. + A read of this attribute is only guaranteed to have correct data + after creation of an SLA. + + Applicability in sla_op: + + * WRITE: rm and update operations + * READ: add and get operations + + Example usage:: + + ## Read + ## Set attributes e.g. cir, pir, srv, etc + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/id + 4 + + ## Write + # echo 7 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/rp + 0x5 ## ring pair ID 0 and ring pair ID 2 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/cir +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Committed information rate (CIR). Rate guaranteed to be + achieved by a particular SLA. The value is expressed in + permille scale, i.e. 1000 refers to the maximum device + throughput for a selected service. + + After sending a "get" to sla_op, this will be populated with the + CIR for that queried SLA. + Write to this file before sending an "add/update" sla_op, to set + the SLA to the specified value. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo 500 > /sys/bus/pci/devices/<BDF>/qat_rl/cir + # echo "add" /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cir + 500 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/pir +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Peak information rate (PIR). The maximum rate that can be + achieved by that particular SLA. An SLA can reach a value + between CIR and PIR when the device is not fully utilized by + requests from other users (assigned to different SLAs). + + After sending a "get" to sla_op, this will be populated with the + PIR for that queried SLA. + Write to this file before sending an "add/update" sla_op, to set + the SLA to the specified value. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo 750 > /sys/bus/pci/devices/<BDF>/qat_rl/pir + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/pir + 750 + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/srv +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) Service (SRV). Represents the service (sym, asym, dc) + associated to an SLA. + Can be written to or queried to set/show the SRV type for an SLA. + The SRV attribute is used to specify the SRV type before adding + an SLA. After an SLA is configured, reports the service + associated to that SLA. + + Applicability in sla_op: + + * WRITE: add and update operations + * READ: get operation + + Example usage:: + + ## Write + # echo "dc" > /sys/bus/pci/devices/<BDF>/qat_rl/srv + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/id + 4 + + ## Read + # echo 4 > /sys/bus/pci/devices/<BDF>/qat_rl/id + # echo "get" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/srv + dc + + This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem +Date: January 2024 +KernelVersion: 6.7 +Contact: qat-linux@intel.com +Description: + (RW) This file will return the remaining capability for a + particular service/sla. This is the remaining value that a new + SLA can be set to or a current SLA can be increased with. + + Example usage:: + + # echo "asym" > /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + 250 + # echo 250 > /sys/bus/pci/devices/<BDF>/qat_rl/cir + # echo "add" > /sys/bus/pci/devices/<BDF>/qat_rl/sla_op + # cat /sys/bus/pci/devices/<BDF>/qat_rl/cap_rem + 0 + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-firmware-dmi-entries b/Documentation/ABI/testing/sysfs-firmware-dmi-entries index fe0289c877..b6c23807b8 100644 --- a/Documentation/ABI/testing/sysfs-firmware-dmi-entries +++ b/Documentation/ABI/testing/sysfs-firmware-dmi-entries @@ -2,7 +2,7 @@ What: /sys/firmware/dmi/entries/ Date: February 2011 Contact: Mike Waychison <mikew@google.com> Description: - Many machines' firmware (x86 and ia64) export DMI / + Many machines' firmware (x86 and arm64) export DMI / SMBIOS tables to the operating system. Getting at this information is often valuable to userland, especially in cases where there are OEM extensions used. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index 420b30f09c..b35649a46a 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -151,6 +151,13 @@ Contact: SeongJae Park <sj@kernel.org> Description: Writing to and reading from this file sets and gets the action of the scheme. +What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/apply_interval_us +Date: Sep 2023 +Contact: SeongJae Park <sj@kernel.org> +Description: Writing a value to this file sets the action apply interval of + the scheme in microseconds. Reading this file returns the + value. + What: /sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/min Date: Mar 2022 Contact: SeongJae Park <sj@kernel.org> diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index 820e412d38..895c47f05f 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -87,19 +87,22 @@ What: /sys/class/tty/ttyS<x>/close_delay Date: October 2012 Contact: Alan Cox <alan@linux.intel.com> Description: - Show the closing delay time for this port in ms. + Show the closing delay time for this port in centiseconds. - These sysfs values expose the TIOCGSERIAL interface via - sysfs rather than via ioctls. + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. What: /sys/class/tty/ttyS<x>/closing_wait Date: October 2012 Contact: Alan Cox <alan@linux.intel.com> Description: - Show the close wait time for this port in ms. + Show the close wait time for this port in centiseconds. - These sysfs values expose the TIOCGSERIAL interface via - sysfs rather than via ioctls. + Waiting forever is represented as 0. If waiting on close is + disabled then the value is 65535. + + These sysfs values expose the TIOCGSERIAL interface via + sysfs rather than via ioctls. What: /sys/class/tty/ttyS<x>/custom_divisor Date: October 2012 |