summaryrefslogtreecommitdiffstats
path: root/Documentation/PCI/endpoint/pci-test-howto.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/PCI/endpoint/pci-test-howto.rst')
-rw-r--r--Documentation/PCI/endpoint/pci-test-howto.rst235
1 files changed, 235 insertions, 0 deletions
diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst
new file mode 100644
index 000000000..909f770a0
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-howto.rst
@@ -0,0 +1,235 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+PCI Test User Guide
+===================
+
+:Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+Endpoint Device
+===============
+
+Endpoint Controller Devices
+---------------------------
+
+To find the list of endpoint controller devices in the system::
+
+ # ls /sys/class/pci_epc/
+ 51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+ # ls /sys/kernel/config/pci_ep/controllers
+ 51000000.pcie_ep
+
+
+Endpoint Function Drivers
+-------------------------
+
+To find the list of endpoint function drivers in the system::
+
+ # ls /sys/bus/pci-epf/drivers
+ pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+ # ls /sys/kernel/config/pci_ep/functions
+ pci_epf_test
+
+
+Creating pci-epf-test Device
+----------------------------
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used::
+
+ # mount -t configfs none /sys/kernel/config
+ # cd /sys/kernel/config/pci_ep/
+ # mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields::
+
+ # ls functions/pci_epf_test/func1
+ baseclass_code interrupt_pin progif_code subsys_id
+ cache_line_size msi_interrupts revid subsys_vendorid
+ deviceid msix_interrupts subclass_code vendorid
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001::
+
+ # cat functions/pci_epf_test/func1/vendorid
+ 0xffff
+ # cat functions/pci_epf_test/func1/interrupt_pin
+ 0x0001
+
+
+Configuring pci-epf-test Device
+-------------------------------
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used::
+
+ # echo 0x104c > functions/pci_epf_test/func1/vendorid
+ # echo 0xb500 > functions/pci_epf_test/func1/deviceid
+ # echo 16 > functions/pci_epf_test/func1/msi_interrupts
+ # echo 8 > functions/pci_epf_test/func1/msix_interrupts
+
+
+Binding pci-epf-test Device to EP Controller
+--------------------------------------------
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system::
+
+ # ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+
+Start the Link
+--------------
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'::
+
+ # echo 1 > controllers/51000000.pcie_ep/start
+
+
+RootComplex Device
+==================
+
+lspci Output
+------------
+
+Note that the devices listed here correspond to the value populated in 1.4
+above::
+
+ 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+ 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+
+Using Endpoint Test function Device
+-----------------------------------
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. To compile this tool the following commands should be used::
+
+ # cd <kernel-dir>
+ # make -C tools/pci
+
+or if you desire to compile and install in your system::
+
+ # cd <kernel-dir>
+ # make -C tools/pci install
+
+The tool and script will be located in <rootfs>/usr/bin/
+
+
+pcitest.sh Output
+~~~~~~~~~~~~~~~~~
+::
+
+ # pcitest.sh
+ BAR tests
+
+ BAR0: OKAY
+ BAR1: OKAY
+ BAR2: OKAY
+ BAR3: OKAY
+ BAR4: NOT OKAY
+ BAR5: NOT OKAY
+
+ Interrupt tests
+
+ SET IRQ TYPE TO LEGACY: OKAY
+ LEGACY IRQ: NOT OKAY
+ SET IRQ TYPE TO MSI: OKAY
+ MSI1: OKAY
+ MSI2: OKAY
+ MSI3: OKAY
+ MSI4: OKAY
+ MSI5: OKAY
+ MSI6: OKAY
+ MSI7: OKAY
+ MSI8: OKAY
+ MSI9: OKAY
+ MSI10: OKAY
+ MSI11: OKAY
+ MSI12: OKAY
+ MSI13: OKAY
+ MSI14: OKAY
+ MSI15: OKAY
+ MSI16: OKAY
+ MSI17: NOT OKAY
+ MSI18: NOT OKAY
+ MSI19: NOT OKAY
+ MSI20: NOT OKAY
+ MSI21: NOT OKAY
+ MSI22: NOT OKAY
+ MSI23: NOT OKAY
+ MSI24: NOT OKAY
+ MSI25: NOT OKAY
+ MSI26: NOT OKAY
+ MSI27: NOT OKAY
+ MSI28: NOT OKAY
+ MSI29: NOT OKAY
+ MSI30: NOT OKAY
+ MSI31: NOT OKAY
+ MSI32: NOT OKAY
+ SET IRQ TYPE TO MSI-X: OKAY
+ MSI-X1: OKAY
+ MSI-X2: OKAY
+ MSI-X3: OKAY
+ MSI-X4: OKAY
+ MSI-X5: OKAY
+ MSI-X6: OKAY
+ MSI-X7: OKAY
+ MSI-X8: OKAY
+ MSI-X9: NOT OKAY
+ MSI-X10: NOT OKAY
+ MSI-X11: NOT OKAY
+ MSI-X12: NOT OKAY
+ MSI-X13: NOT OKAY
+ MSI-X14: NOT OKAY
+ MSI-X15: NOT OKAY
+ MSI-X16: NOT OKAY
+ [...]
+ MSI-X2047: NOT OKAY
+ MSI-X2048: NOT OKAY
+
+ Read Tests
+
+ SET IRQ TYPE TO MSI: OKAY
+ READ ( 1 bytes): OKAY
+ READ ( 1024 bytes): OKAY
+ READ ( 1025 bytes): OKAY
+ READ (1024000 bytes): OKAY
+ READ (1024001 bytes): OKAY
+
+ Write Tests
+
+ WRITE ( 1 bytes): OKAY
+ WRITE ( 1024 bytes): OKAY
+ WRITE ( 1025 bytes): OKAY
+ WRITE (1024000 bytes): OKAY
+ WRITE (1024001 bytes): OKAY
+
+ Copy Tests
+
+ COPY ( 1 bytes): OKAY
+ COPY ( 1024 bytes): OKAY
+ COPY ( 1025 bytes): OKAY
+ COPY (1024000 bytes): OKAY
+ COPY (1024001 bytes): OKAY