summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/device-mapper/snapshot.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/device-mapper/snapshot.rst')
-rw-r--r--Documentation/admin-guide/device-mapper/snapshot.rst196
1 files changed, 196 insertions, 0 deletions
diff --git a/Documentation/admin-guide/device-mapper/snapshot.rst b/Documentation/admin-guide/device-mapper/snapshot.rst
new file mode 100644
index 0000000000..ccdd8b587a
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/snapshot.rst
@@ -0,0 +1,196 @@
+==============================
+Device-mapper snapshot support
+==============================
+
+Device-mapper allows you, without massive data copying:
+
+- To create snapshots of any block device i.e. mountable, saved states of
+ the block device which are also writable without interfering with the
+ original content;
+- To create device "forks", i.e. multiple different versions of the
+ same data stream.
+- To merge a snapshot of a block device back into the snapshot's origin
+ device.
+
+In the first two cases, dm copies only the chunks of data that get
+changed and uses a separate copy-on-write (COW) block device for
+storage.
+
+For snapshot merge the contents of the COW storage are merged back into
+the origin device.
+
+
+There are three dm targets available:
+snapshot, snapshot-origin, and snapshot-merge.
+
+- snapshot-origin <origin>
+
+which will normally have one or more snapshots based on it.
+Reads will be mapped directly to the backing device. For each write, the
+original data will be saved in the <COW device> of each snapshot to keep
+its visible content unchanged, at least until the <COW device> fills up.
+
+
+- snapshot <origin> <COW device> <persistent?> <chunksize>
+ [<# feature args> [<arg>]*]
+
+A snapshot of the <origin> block device is created. Changed chunks of
+<chunksize> sectors will be stored on the <COW device>. Writes will
+only go to the <COW device>. Reads will come from the <COW device> or
+from <origin> for unchanged data. <COW device> will often be
+smaller than the origin and if it fills up the snapshot will become
+useless and be disabled, returning errors. So it is important to monitor
+the amount of free space and expand the <COW device> before it fills up.
+
+<persistent?> is P (Persistent) or N (Not persistent - will not survive
+after reboot). O (Overflow) can be added as a persistent store option
+to allow userspace to advertise its support for seeing "Overflow" in the
+snapshot status. So supported store types are "P", "PO" and "N".
+
+The difference between persistent and transient is with transient
+snapshots less metadata must be saved on disk - they can be kept in
+memory by the kernel.
+
+When loading or unloading the snapshot target, the corresponding
+snapshot-origin or snapshot-merge target must be suspended. A failure to
+suspend the origin target could result in data corruption.
+
+Optional features:
+
+ discard_zeroes_cow - a discard issued to the snapshot device that
+ maps to entire chunks to will zero the corresponding exception(s) in
+ the snapshot's exception store.
+
+ discard_passdown_origin - a discard to the snapshot device is passed
+ down to the snapshot-origin's underlying device. This doesn't cause
+ copy-out to the snapshot exception store because the snapshot-origin
+ target is bypassed.
+
+ The discard_passdown_origin feature depends on the discard_zeroes_cow
+ feature being enabled.
+
+
+- snapshot-merge <origin> <COW device> <persistent> <chunksize>
+ [<# feature args> [<arg>]*]
+
+takes the same table arguments as the snapshot target except it only
+works with persistent snapshots. This target assumes the role of the
+"snapshot-origin" target and must not be loaded if the "snapshot-origin"
+is still present for <origin>.
+
+Creates a merging snapshot that takes control of the changed chunks
+stored in the <COW device> of an existing snapshot, through a handover
+procedure, and merges these chunks back into the <origin>. Once merging
+has started (in the background) the <origin> may be opened and the merge
+will continue while I/O is flowing to it. Changes to the <origin> are
+deferred until the merging snapshot's corresponding chunk(s) have been
+merged. Once merging has started the snapshot device, associated with
+the "snapshot" target, will return -EIO when accessed.
+
+
+How snapshot is used by LVM2
+============================
+When you create the first LVM2 snapshot of a volume, four dm devices are used:
+
+1) a device containing the original mapping table of the source volume;
+2) a device used as the <COW device>;
+3) a "snapshot" device, combining #1 and #2, which is the visible snapshot
+ volume;
+4) the "original" volume (which uses the device number used by the original
+ source volume), whose table is replaced by a "snapshot-origin" mapping
+ from device #1.
+
+A fixed naming scheme is used, so with the following commands::
+
+ lvcreate -L 1G -n base volumeGroup
+ lvcreate -L 100M --snapshot -n snap volumeGroup/base
+
+we'll have this situation (with volumes in above order)::
+
+ # dmsetup table|grep volumeGroup
+
+ volumeGroup-base-real: 0 2097152 linear 8:19 384
+ volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
+ volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
+ volumeGroup-base: 0 2097152 snapshot-origin 254:11
+
+ # ls -lL /dev/mapper/volumeGroup-*
+ brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+ brw------- 1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
+ brw------- 1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
+ brw------- 1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
+
+
+How snapshot-merge is used by LVM2
+==================================
+A merging snapshot assumes the role of the "snapshot-origin" while
+merging. As such the "snapshot-origin" is replaced with
+"snapshot-merge". The "-real" device is not changed and the "-cow"
+device is renamed to <origin name>-cow to aid LVM2's cleanup of the
+merging snapshot after it completes. The "snapshot" that hands over its
+COW device to the "snapshot-merge" is deactivated (unless using lvchange
+--refresh); but if it is left active it will simply return I/O errors.
+
+A snapshot will merge into its origin with the following command::
+
+ lvconvert --merge volumeGroup/snap
+
+we'll now have this situation::
+
+ # dmsetup table|grep volumeGroup
+
+ volumeGroup-base-real: 0 2097152 linear 8:19 384
+ volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+ volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+
+ # ls -lL /dev/mapper/volumeGroup-*
+ brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+ brw------- 1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+ brw------- 1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
+
+
+How to determine when a merging is complete
+===========================================
+The snapshot-merge and snapshot status lines end with:
+
+ <sectors_allocated>/<total_sectors> <metadata_sectors>
+
+Both <sectors_allocated> and <total_sectors> include both data and metadata.
+During merging, the number of sectors allocated gets smaller and
+smaller. Merging has finished when the number of sectors holding data
+is zero, in other words <sectors_allocated> == <metadata_sectors>.
+
+Here is a practical example (using a hybrid of lvm and dmsetup commands)::
+
+ # lvs
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup owi-a- 4.00g
+ snap volumeGroup swi-a- 1.00g base 18.97
+
+ # dmsetup status volumeGroup-snap
+ 0 8388608 snapshot 397896/2097152 1560
+ ^^^^ metadata sectors
+
+ # lvconvert --merge -b volumeGroup/snap
+ Merging of volume snap started.
+
+ # lvs volumeGroup/snap
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup Owi-a- 4.00g 17.23
+
+ # dmsetup status volumeGroup-base
+ 0 8388608 snapshot-merge 281688/2097152 1104
+
+ # dmsetup status volumeGroup-base
+ 0 8388608 snapshot-merge 180480/2097152 712
+
+ # dmsetup status volumeGroup-base
+ 0 8388608 snapshot-merge 16/2097152 16
+
+Merging has finished.
+
+::
+
+ # lvs
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup owi-a- 4.00g