diff options
Diffstat (limited to 'Documentation/admin-guide/device-mapper/verity.rst')
| -rw-r--r-- | Documentation/admin-guide/device-mapper/verity.rst | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/Documentation/admin-guide/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst new file mode 100644 index 0000000000..a65c1602cb --- /dev/null +++ b/Documentation/admin-guide/device-mapper/verity.rst @@ -0,0 +1,249 @@ +========= +dm-verity +========= + +Device-Mapper's "verity" target provides transparent integrity checking of +block devices using a cryptographic digest provided by the kernel crypto API. +This target is read-only. + +Construction Parameters +======================= + +:: + + <version> <dev> <hash_dev> + <data_block_size> <hash_block_size> + <num_data_blocks> <hash_start_block> + <algorithm> <digest> <salt> + [<#opt_params> <opt_params>] + +<version> + This is the type of the on-disk hash format. + + 0 is the original format used in the Chromium OS. + The salt is appended when hashing, digests are stored continuously and + the rest of the block is padded with zeroes. + + 1 is the current format that should be used for new devices. + The salt is prepended when hashing and each digest is + padded with zeroes to the power of two. + +<dev> + This is the device containing data, the integrity of which needs to be + checked. It may be specified as a path, like /dev/sdaX, or a device number, + <major>:<minor>. + +<hash_dev> + This is the device that supplies the hash tree data. It may be + specified similarly to the device path and may be the same device. If the + same device is used, the hash_start should be outside the configured + dm-verity device. + +<data_block_size> + The block size on a data device in bytes. + Each block corresponds to one digest on the hash device. + +<hash_block_size> + The size of a hash block in bytes. + +<num_data_blocks> + The number of data blocks on the data device. Additional blocks are + inaccessible. You can place hashes to the same partition as data, in this + case hashes are placed after <num_data_blocks>. + +<hash_start_block> + This is the offset, in <hash_block_size>-blocks, from the start of hash_dev + to the root block of the hash tree. + +<algorithm> + The cryptographic hash algorithm used for this device. This should + be the name of the algorithm, like "sha1". + +<digest> + The hexadecimal encoding of the cryptographic hash of the root hash block + and the salt. This hash should be trusted as there is no other authenticity + beyond this point. + +<salt> + The hexadecimal encoding of the salt value. + +<#opt_params> + Number of optional parameters. If there are no optional parameters, + the optional parameters section can be skipped or #opt_params can be zero. + Otherwise #opt_params is the number of following arguments. + + Example of optional parameters section: + 1 ignore_corruption + +ignore_corruption + Log corrupted blocks, but allow read operations to proceed normally. + +restart_on_corruption + Restart the system when a corrupted block is discovered. This option is + not compatible with ignore_corruption and requires user space support to + avoid restart loops. + +panic_on_corruption + Panic the device when a corrupted block is discovered. This option is + not compatible with ignore_corruption and restart_on_corruption. + +ignore_zero_blocks + Do not verify blocks that are expected to contain zeroes and always return + zeroes instead. This may be useful if the partition contains unused blocks + that are not guaranteed to contain zeroes. + +use_fec_from_device <fec_dev> + Use forward error correction (FEC) to recover from corruption if hash + verification fails. Use encoding data from the specified device. This + may be the same device where data and hash blocks reside, in which case + fec_start must be outside data and hash areas. + + If the encoding data covers additional metadata, it must be accessible + on the hash device after the hash blocks. + + Note: block sizes for data and hash devices must match. Also, if the + verity <dev> is encrypted the <fec_dev> should be too. + +fec_roots <num> + Number of generator roots. This equals to the number of parity bytes in + the encoding data. For example, in RS(M, N) encoding, the number of roots + is M-N. + +fec_blocks <num> + The number of encoding data blocks on the FEC device. The block size for + the FEC device is <data_block_size>. + +fec_start <offset> + This is the offset, in <data_block_size> blocks, from the start of the + FEC device to the beginning of the encoding data. + +check_at_most_once + Verify data blocks only the first time they are read from the data device, + rather than every time. This reduces the overhead of dm-verity so that it + can be used on systems that are memory and/or CPU constrained. However, it + provides a reduced level of security because only offline tampering of the + data device's content will be detected, not online tampering. + + Hash blocks are still verified each time they are read from the hash device, + since verification of hash blocks is less performance critical than data + blocks, and a hash block will not be verified any more after all the data + blocks it covers have been verified anyway. + +root_hash_sig_key_desc <key_description> + This is the description of the USER_KEY that the kernel will lookup to get + the pkcs7 signature of the roothash. The pkcs7 signature is used to validate + the root hash during the creation of the device mapper block device. + Verification of roothash depends on the config DM_VERITY_VERIFY_ROOTHASH_SIG + being set in the kernel. The signatures are checked against the builtin + trusted keyring by default, or the secondary trusted keyring if + DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING is set. The secondary + trusted keyring includes by default the builtin trusted keyring, and it can + also gain new certificates at run time if they are signed by a certificate + already in the secondary trusted keyring. + +try_verify_in_tasklet + If verity hashes are in cache, verify data blocks in kernel tasklet instead + of workqueue. This option can reduce IO latency. + +Theory of operation +=================== + +dm-verity is meant to be set up as part of a verified boot path. This +may be anything ranging from a boot using tboot or trustedgrub to just +booting from a known-good device (like a USB drive or CD). + +When a dm-verity device is configured, it is expected that the caller +has been authenticated in some way (cryptographic signatures, etc). +After instantiation, all hashes will be verified on-demand during +disk access. If they cannot be verified up to the root node of the +tree, the root hash, then the I/O will fail. This should detect +tampering with any data on the device and the hash data. + +Cryptographic hashes are used to assert the integrity of the device on a +per-block basis. This allows for a lightweight hash computation on first read +into the page cache. Block hashes are stored linearly, aligned to the nearest +block size. + +If forward error correction (FEC) support is enabled any recovery of +corrupted data will be verified using the cryptographic hash of the +corresponding data. This is why combining error correction with +integrity checking is essential. + +Hash Tree +--------- + +Each node in the tree is a cryptographic hash. If it is a leaf node, the hash +of some data block on disk is calculated. If it is an intermediary node, +the hash of a number of child nodes is calculated. + +Each entry in the tree is a collection of neighboring nodes that fit in one +block. The number is determined based on block_size and the size of the +selected cryptographic digest algorithm. The hashes are linearly-ordered in +this entry and any unaligned trailing space is ignored but included when +calculating the parent node. + +The tree looks something like: + + alg = sha256, num_blocks = 32768, block_size = 4096 + +:: + + [ root ] + / . . . \ + [entry_0] [entry_1] + / . . . \ . . . \ + [entry_0_0] . . . [entry_0_127] . . . . [entry_1_127] + / ... \ / . . . \ / \ + blk_0 ... blk_127 blk_16256 blk_16383 blk_32640 . . . blk_32767 + + +On-disk format +============== + +The verity kernel code does not read the verity metadata on-disk header. +It only reads the hash blocks which directly follow the header. +It is expected that a user-space tool will verify the integrity of the +verity header. + +Alternatively, the header can be omitted and the dmsetup parameters can +be passed via the kernel command-line in a rooted chain of trust where +the command-line is verified. + +Directly following the header (and with sector number padded to the next hash +block boundary) are the hash blocks which are stored a depth at a time +(starting from the root), sorted in order of increasing index. + +The full specification of kernel parameters and on-disk metadata format +is available at the cryptsetup project's wiki page + + https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity + +Status +====== +V (for Valid) is returned if every check performed so far was valid. +If any check failed, C (for Corruption) is returned. + +Example +======= +Set up a device:: + + # dmsetup create vroot --readonly --table \ + "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\ + "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\ + "1234000000000000000000000000000000000000000000000000000000000000" + +A command line tool veritysetup is available to compute or verify +the hash tree or activate the kernel device. This is available from +the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/ +(as a libcryptsetup extension). + +Create hash on the device:: + + # veritysetup format /dev/sda1 /dev/sda2 + ... + Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 + +Activate the device:: + + # veritysetup create vroot /dev/sda1 /dev/sda2 \ + 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 |