summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/media/omap3isp.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/admin-guide/media/omap3isp.rst92
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/admin-guide/media/omap3isp.rst b/Documentation/admin-guide/media/omap3isp.rst
new file mode 100644
index 0000000000..f32e7375a1
--- /dev/null
+++ b/Documentation/admin-guide/media/omap3isp.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+OMAP 3 Image Signal Processor (ISP) driver
+==========================================
+
+Copyright |copy| 2010 Nokia Corporation
+
+Copyright |copy| 2009 Texas Instruments, Inc.
+
+Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
+Sakari Ailus <sakari.ailus@iki.fi>, David Cohen <dacohen@gmail.com>
+
+
+Introduction
+------------
+
+This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP)
+driver located under drivers/media/platform/ti/omap3isp. The original driver was
+written by Texas Instruments but since that it has been rewritten (twice) at
+Nokia.
+
+The driver has been successfully used on the following versions of OMAP 3:
+
+- 3430
+- 3530
+- 3630
+
+The driver implements V4L2, Media controller and v4l2_subdev interfaces.
+Sensor, lens and flash drivers using the v4l2_subdev interface in the kernel
+are supported.
+
+
+Split to subdevs
+----------------
+
+The OMAP 3 ISP is split into V4L2 subdevs, each of the blocks inside the ISP
+having one subdev to represent it. Each of the subdevs provide a V4L2 subdev
+interface to userspace.
+
+- OMAP3 ISP CCP2
+- OMAP3 ISP CSI2a
+- OMAP3 ISP CCDC
+- OMAP3 ISP preview
+- OMAP3 ISP resizer
+- OMAP3 ISP AEWB
+- OMAP3 ISP AF
+- OMAP3 ISP histogram
+
+Each possible link in the ISP is modelled by a link in the Media controller
+interface. For an example program see [#]_.
+
+
+Controlling the OMAP 3 ISP
+--------------------------
+
+In general, the settings given to the OMAP 3 ISP take effect at the beginning
+of the following frame. This is done when the module becomes idle during the
+vertical blanking period on the sensor. In memory-to-memory operation the pipe
+is run one frame at a time. Applying the settings is done between the frames.
+
+All the blocks in the ISP, excluding the CSI-2 and possibly the CCP2 receiver,
+insist on receiving complete frames. Sensors must thus never send the ISP
+partial frames.
+
+Autoidle does have issues with some ISP blocks on the 3430, at least.
+Autoidle is only enabled on 3630 when the omap3isp module parameter autoidle
+is non-zero.
+
+Technical reference manuals (TRMs) and other documentation
+----------------------------------------------------------
+
+OMAP 3430 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP34xx_ES3.1.x_PUBLIC_TRM_vZM.zip>
+Referenced 2011-03-05.
+
+OMAP 35xx TRM:
+<URL:http://www.ti.com/litv/pdf/spruf98o> Referenced 2011-03-05.
+
+OMAP 3630 TRM:
+<URL:http://focus.ti.com/pdfs/wtbu/OMAP36xx_ES1.x_PUBLIC_TRM_vQ.zip>
+Referenced 2011-03-05.
+
+DM 3730 TRM:
+<URL:http://www.ti.com/litv/pdf/sprugn4h> Referenced 2011-03-06.
+
+
+References
+----------
+
+.. [#] http://git.ideasonboard.org/?p=media-ctl.git;a=summary