summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/media/visl.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/admin-guide/media/visl.rst175
1 files changed, 175 insertions, 0 deletions
diff --git a/Documentation/admin-guide/media/visl.rst b/Documentation/admin-guide/media/visl.rst
new file mode 100644
index 0000000000..7d2dc78341
--- /dev/null
+++ b/Documentation/admin-guide/media/visl.rst
@@ -0,0 +1,175 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Stateless Decoder Driver (visl)
+===========================================
+
+A virtual stateless decoder device for stateless uAPI development
+purposes.
+
+This tool's objective is to help the development and testing of
+userspace applications that use the V4L2 stateless API to decode media.
+
+A userspace implementation can use visl to run a decoding loop even when
+no hardware is available or when the kernel uAPI for the codec has not
+been upstreamed yet. This can reveal bugs at an early stage.
+
+This driver can also trace the contents of the V4L2 controls submitted
+to it. It can also dump the contents of the vb2 buffers through a
+debugfs interface. This is in many ways similar to the tracing
+infrastructure available for other popular encode/decode APIs out there
+and can help develop a userspace application by using another (working)
+one as a reference.
+
+.. note::
+
+ No actual decoding of video frames is performed by visl. The
+ V4L2 test pattern generator is used to write various debug information
+ to the capture buffers instead.
+
+Module parameters
+-----------------
+
+- visl_debug: Activates debug info, printing various debug messages through
+ dprintk. Also controls whether per-frame debug info is shown. Defaults to off.
+ Note that enabling this feature can result in slow performance through serial.
+
+- visl_transtime_ms: Simulated process time in milliseconds. Slowing down the
+ decoding speed can be useful for debugging.
+
+- visl_dprintk_frame_start, visl_dprintk_frame_nframes: Dictates a range of
+ frames where dprintk is activated. This only controls the dprintk tracing on a
+ per-frame basis. Note that printing a lot of data can be slow through serial.
+
+- keep_bitstream_buffers: Controls whether bitstream (i.e. OUTPUT) buffers are
+ kept after a decoding session. Defaults to false so as to reduce the amount of
+ clutter. keep_bitstream_buffers == false works well when live debugging the
+ client program with GDB.
+
+- bitstream_trace_frame_start, bitstream_trace_nframes: Similar to
+ visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of
+ buffer data through debugfs instead.
+
+What is the default use case for this driver?
+---------------------------------------------
+
+This driver can be used as a way to compare different userspace implementations.
+This assumes that a working client is run against visl and that the ftrace and
+OUTPUT buffer data is subsequently used to debug a work-in-progress
+implementation.
+
+Information on reference frames, their timestamps, the status of the OUTPUT and
+CAPTURE queues and more can be read directly from the CAPTURE buffers.
+
+Supported codecs
+----------------
+
+The following codecs are supported:
+
+- FWHT
+- MPEG2
+- VP8
+- VP9
+- H.264
+- HEVC
+
+visl trace events
+-----------------
+The trace events are defined on a per-codec basis, e.g.:
+
+.. code-block:: bash
+
+ $ ls /sys/kernel/debug/tracing/events/ | grep visl
+ visl_fwht_controls
+ visl_h264_controls
+ visl_hevc_controls
+ visl_mpeg2_controls
+ visl_vp8_controls
+ visl_vp9_controls
+
+For example, in order to dump HEVC SPS data:
+
+.. code-block:: bash
+
+ $ echo 1 > /sys/kernel/debug/tracing/events/visl_hevc_controls/v4l2_ctrl_hevc_sps/enable
+
+The SPS data will be dumped to the trace buffer, i.e.:
+
+.. code-block:: bash
+
+ $ cat /sys/kernel/debug/tracing/trace
+ video_parameter_set_id 0
+ seq_parameter_set_id 0
+ pic_width_in_luma_samples 1920
+ pic_height_in_luma_samples 1080
+ bit_depth_luma_minus8 0
+ bit_depth_chroma_minus8 0
+ log2_max_pic_order_cnt_lsb_minus4 4
+ sps_max_dec_pic_buffering_minus1 6
+ sps_max_num_reorder_pics 2
+ sps_max_latency_increase_plus1 0
+ log2_min_luma_coding_block_size_minus3 0
+ log2_diff_max_min_luma_coding_block_size 3
+ log2_min_luma_transform_block_size_minus2 0
+ log2_diff_max_min_luma_transform_block_size 3
+ max_transform_hierarchy_depth_inter 2
+ max_transform_hierarchy_depth_intra 2
+ pcm_sample_bit_depth_luma_minus1 0
+ pcm_sample_bit_depth_chroma_minus1 0
+ log2_min_pcm_luma_coding_block_size_minus3 0
+ log2_diff_max_min_pcm_luma_coding_block_size 0
+ num_short_term_ref_pic_sets 0
+ num_long_term_ref_pics_sps 0
+ chroma_format_idc 1
+ sps_max_sub_layers_minus1 0
+ flags AMP_ENABLED|SAMPLE_ADAPTIVE_OFFSET|TEMPORAL_MVP_ENABLED|STRONG_INTRA_SMOOTHING_ENABLED
+
+
+Dumping OUTPUT buffer data through debugfs
+------------------------------------------
+
+If the **VISL_DEBUGFS** Kconfig is enabled, visl will populate
+**/sys/kernel/debug/visl/bitstream** with OUTPUT buffer data according to the
+values of bitstream_trace_frame_start and bitstream_trace_nframes. This can
+highlight errors as broken clients may fail to fill the buffers properly.
+
+A single file is created for each processed OUTPUT buffer. Its name contains an
+integer that denotes the buffer sequence, i.e.:
+
+.. code-block:: c
+
+ snprintf(name, 32, "bitstream%d", run->src->sequence);
+
+Dumping the values is simply a matter of reading from the file, i.e.:
+
+For the buffer with sequence == 0:
+
+.. code-block:: bash
+
+ $ xxd /sys/kernel/debug/visl/bitstream/bitstream0
+ 00000000: 2601 af04 d088 bc25 a173 0e41 a4f2 3274 &......%.s.A..2t
+ 00000010: c668 cb28 e775 b4ac f53a ba60 f8fd 3aa1 .h.(.u...:.`..:.
+ 00000020: 46b4 bcfc 506c e227 2372 e5f5 d7ea 579f F...Pl.'#r....W.
+ 00000030: 6371 5eb5 0eb8 23b5 ca6a 5de5 983a 19e4 cq^...#..j]..:..
+ 00000040: e8c3 4320 b4ba a226 cbc1 4138 3a12 32d6 ..C ...&..A8:.2.
+ 00000050: fef3 247b 3523 4e90 9682 ac8e eb0c a389 ..${5#N.........
+ 00000060: ddd0 6cfc 0187 0e20 7aae b15b 1812 3d33 ..l.... z..[..=3
+ 00000070: e1c5 f425 a83a 00b7 4f18 8127 3c4c aefb ...%.:..O..'<L..
+
+For the buffer with sequence == 1:
+
+.. code-block:: bash
+
+ $ xxd /sys/kernel/debug/visl/bitstream/bitstream1
+ 00000000: 0201 d021 49e1 0c40 aa11 1449 14a6 01dc ...!I..@...I....
+ 00000010: 7023 889a c8cd 2cd0 13b4 dab0 e8ca 21fe p#....,.......!.
+ 00000020: c4c8 ab4c 486e 4e2f b0df 96cc c74e 8dde ...LHnN/.....N..
+ 00000030: 8ce7 ee36 d880 4095 4d64 30a0 ff4f 0c5e ...6..@.Md0..O.^
+ 00000040: f16b a6a1 d806 ca2a 0ece a673 7bea 1f37 .k.....*...s{..7
+ 00000050: 370f 5bb9 1dc4 ba21 6434 bc53 0173 cba0 7.[....!d4.S.s..
+ 00000060: dfe6 bc99 01ea b6e0 346b 92b5 c8de 9f5d ........4k.....]
+ 00000070: e7cc 3484 1769 fef2 a693 a945 2c8b 31da ..4..i.....E,.1.
+
+And so on.
+
+By default, the files are removed during STREAMOFF. This is to reduce the amount
+of clutter.