diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/admin-guide/perf/hns3-pmu.rst | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst new file mode 100644 index 0000000000..75a40846d4 --- /dev/null +++ b/Documentation/admin-guide/perf/hns3-pmu.rst @@ -0,0 +1,136 @@ +====================================== +HNS3 Performance Monitoring Unit (PMU) +====================================== + +HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an +End Point device to collect performance statistics of HiSilicon SoC NIC. +On Hip09, each SICL(Super I/O cluster) has one PMU device. + +HNS3 PMU supports collection of performance statistics such as bandwidth, +latency, packet rate and interrupt rate. + +Each HNS3 PMU supports 8 hardware events. + +HNS3 PMU driver +=============== + +The HNS3 PMU driver registers a perf PMU with the name of its sicl id.:: + + /sys/devices/hns3_pmu_sicl_<sicl_id> + +PMU driver provides description of available events, filter modes, format, +identifier and cpumask in sysfs. + +The "events" directory describes the event code of all supported events +shown in perf list. + +The "filtermode" directory describes the supported filter modes of each +event. + +The "format" directory describes all formats of the config (events) and +config1 (filter options) fields of the perf_event_attr structure. + +The "identifier" file shows version of PMU hardware device. + +The "bdf_min" and "bdf_max" files show the supported bdf range of each +pmu device. + +The "hw_clk_freq" file shows the hardware clock frequency of each pmu +device. + +Example usage of checking event code and subevent code:: + + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time + config=0x00204 + $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num + config=0x10204 + +Each performance statistic has a pair of events to get two values to +calculate real performance data in userspace. + +The bits 0~15 of config (here 0x0204) are the true hardware event code. If +two events have same value of bits 0~15 of config, that means they are +event pair. And the bit 16 of config indicates getting counter 0 or +counter 1 of hardware event. + +After getting two values of event pair in userspace, the formula of +computation to calculate real performance data is::: + + counter 0 / counter 1 + +Example usage of checking supported filter mode:: + + $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num + filter mode supported: global/port/port-tc/func/func-queue/ + +Example usage of perf:: + + $# perf list + hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event] + hns3_pmu_sicl_0/bw_ssu_rpu_time/ [kernel PMU event] + ------------------------------------------ + + $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000 + or + $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000 + + +Filter modes +-------------- + +1. global mode +PMU collect performance statistics for all HNS3 PCIe functions of IO DIE. +Set the "global" filter option to 1 will enable this mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000 + +2. port mode +PMU collect performance statistic of one whole physical port. The port id +is same as mac id. The "tc" filter option must be set to 0xF in this mode, +here tc stands for traffic class. + +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000 + +3. port-tc mode +PMU collect performance statistic of one tc of physical port. The port id +is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this +mode. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000 + +4. func mode +PMU collect performance statistic of one PF/VF. The function id is BDF of +PF/VF, its conversion formula:: + + func = (bus << 8) + (device << 3) + (function) + +for example: + BDF func + 35:00.0 0x3500 + 35:00.1 0x3501 + 35:01.0 0x3508 + +In this mode, the "queue" filter option must be set to 0xFFFF. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000 + +5. func-queue mode +PMU collect performance statistic of one queue of PF/VF. The function id +is BDF of PF/VF, the "queue" filter option must be set to the exact queue +id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000 + +6. func-intr mode +PMU collect performance statistic of one interrupt of PF/VF. The function +id is BDF of PF/VF, the "intr" filter option must be set to the exact +interrupt id of function. +Example usage of perf:: + + $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000 |