diff options
Diffstat (limited to 'Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst')
-rw-r--r-- | Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst new file mode 100644 index 0000000000..5ab3440e6c --- /dev/null +++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +============================== +Intel Uncore Frequency Scaling +============================== + +:Copyright: |copy| 2022-2023 Intel Corporation + +:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> + +Introduction +------------ + +The uncore can consume significant amount of power in Intel's Xeon servers based +on the workload characteristics. To optimize the total power and improve overall +performance, SoCs have internal algorithms for scaling uncore frequency. These +algorithms monitor workload usage of uncore and set a desirable frequency. + +It is possible that users have different expectations of uncore performance and +want to have control over it. The objective is similar to allowing users to set +the scaling min/max frequencies via cpufreq sysfs to improve CPU performance. +Users may have some latency sensitive workloads where they do not want any +change to uncore frequency. Also, users may have workloads which require +different core and uncore performance at distinct phases and they may want to +use both cpufreq and the uncore scaling interface to distribute power and +improve overall performance. + +Sysfs Interface +--------------- + +To control uncore frequency, a sysfs interface is provided in the directory: +`/sys/devices/system/cpu/intel_uncore_frequency/`. + +There is one directory for each package and die combination as the scope of +uncore scaling control is per die in multiple die/package SoCs or per +package for single die per package SoCs. The name represents the +scope of control. For example: 'package_00_die_00' is for package id 0 and +die 0. + +Each package_*_die_* contains the following attributes: + +``initial_max_freq_khz`` + Out of reset, this attribute represent the maximum possible frequency. + This is a read-only attribute. If users adjust max_freq_khz, + they can always go back to maximum using the value from this attribute. + +``initial_min_freq_khz`` + Out of reset, this attribute represent the minimum possible frequency. + This is a read-only attribute. If users adjust min_freq_khz, + they can always go back to minimum using the value from this attribute. + +``max_freq_khz`` + This attribute is used to set the maximum uncore frequency. + +``min_freq_khz`` + This attribute is used to set the minimum uncore frequency. + +``current_freq_khz`` + This attribute is used to get the current uncore frequency. + +SoCs with TPMI (Topology Aware Register and PM Capsule Interface) +----------------------------------------------------------------- + +An SoC can contain multiple power domains with individual or collection +of mesh partitions. This partition is called fabric cluster. + +Certain type of meshes will need to run at the same frequency, they will +be placed in the same fabric cluster. Benefit of fabric cluster is that it +offers a scalable mechanism to deal with partitioned fabrics in a SoC. + +The current sysfs interface supports controls at package and die level. +This interface is not enough to support more granular control at +fabric cluster level. + +SoCs with the support of TPMI (Topology Aware Register and PM Capsule +Interface), can have multiple power domains. Each power domain can +contain one or more fabric clusters. + +To represent controls at fabric cluster level in addition to the +controls at package and die level (like systems without TPMI +support), sysfs is enhanced. This granular interface is presented in the +sysfs with directories names prefixed with "uncore". For example: +uncore00, uncore01 etc. + +The scope of control is specified by attributes "package_id", "domain_id" +and "fabric_cluster_id" in the directory. + +Attributes in each directory: + +``domain_id`` + This attribute is used to get the power domain id of this instance. + +``fabric_cluster_id`` + This attribute is used to get the fabric cluster id of this instance. + +``package_id`` + This attribute is used to get the package id of this instance. + +The other attributes are same as presented at package_*_die_* level. + +In most of current use cases, the "max_freq_khz" and "min_freq_khz" +is updated at "package_*_die_*" level. This model will be still supported +with the following approach: + +When user uses controls at "package_*_die_*" level, then every fabric +cluster is affected in that package and die. For example: user changes +"max_freq_khz" in the package_00_die_00, then "max_freq_khz" for uncore* +directory with the same package id will be updated. In this case user can +still update "max_freq_khz" at each uncore* level, which is more restrictive. +Similarly, user can update "min_freq_khz" at "package_*_die_*" level +to apply at each uncore* level. + +Support for "current_freq_khz" is available only at each fabric cluster +level (i.e., in uncore* directory). |