summaryrefslogtreecommitdiffstats
path: root/Documentation/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arch/powerpc')
-rw-r--r--Documentation/arch/powerpc/associativity.rst105
-rw-r--r--Documentation/arch/powerpc/booting.rst110
-rw-r--r--Documentation/arch/powerpc/bootwrapper.rst131
-rw-r--r--Documentation/arch/powerpc/cpu_families.rst237
-rw-r--r--Documentation/arch/powerpc/cpu_features.rst60
-rw-r--r--Documentation/arch/powerpc/cxl.rst469
-rw-r--r--Documentation/arch/powerpc/cxlflash.rst433
-rw-r--r--Documentation/arch/powerpc/dawr-power9.rst101
-rw-r--r--Documentation/arch/powerpc/dexcr.rst58
-rw-r--r--Documentation/arch/powerpc/dscr.rst87
-rw-r--r--Documentation/arch/powerpc/eeh-pci-error-recovery.rst336
-rw-r--r--Documentation/arch/powerpc/elf_hwcaps.rst231
-rw-r--r--Documentation/arch/powerpc/elfnote.rst41
-rw-r--r--Documentation/arch/powerpc/features.rst3
-rw-r--r--Documentation/arch/powerpc/firmware-assisted-dump.rst381
-rw-r--r--Documentation/arch/powerpc/hvcs.rst581
-rw-r--r--Documentation/arch/powerpc/imc.rst199
-rw-r--r--Documentation/arch/powerpc/index.rst49
-rw-r--r--Documentation/arch/powerpc/isa-versions.rst101
-rw-r--r--Documentation/arch/powerpc/kasan.txt58
-rw-r--r--Documentation/arch/powerpc/kaslr-booke32.rst42
-rw-r--r--Documentation/arch/powerpc/kvm-nested.rst634
-rw-r--r--Documentation/arch/powerpc/mpc52xx.rst43
-rw-r--r--Documentation/arch/powerpc/papr_hcalls.rst302
-rw-r--r--Documentation/arch/powerpc/pci_iov_resource_on_powernv.rst312
-rw-r--r--Documentation/arch/powerpc/pmu-ebb.rst138
-rw-r--r--Documentation/arch/powerpc/ptrace.rst157
-rw-r--r--Documentation/arch/powerpc/qe_firmware.rst296
-rw-r--r--Documentation/arch/powerpc/syscall64-abi.rst153
-rw-r--r--Documentation/arch/powerpc/transactional_memory.rst274
-rw-r--r--Documentation/arch/powerpc/ultravisor.rst1117
-rw-r--r--Documentation/arch/powerpc/vas-api.rst305
-rw-r--r--Documentation/arch/powerpc/vcpudispatch_stats.rst75
-rw-r--r--Documentation/arch/powerpc/vmemmap_dedup.rst101
34 files changed, 7720 insertions, 0 deletions
diff --git a/Documentation/arch/powerpc/associativity.rst b/Documentation/arch/powerpc/associativity.rst
new file mode 100644
index 0000000000..4d01c73685
--- /dev/null
+++ b/Documentation/arch/powerpc/associativity.rst
@@ -0,0 +1,105 @@
+============================
+NUMA resource associativity
+============================
+
+Associativity represents the groupings of the various platform resources into
+domains of substantially similar mean performance relative to resources outside
+of that domain. Resources subsets of a given domain that exhibit better
+performance relative to each other than relative to other resources subsets
+are represented as being members of a sub-grouping domain. This performance
+characteristic is presented in terms of NUMA node distance within the Linux kernel.
+From the platform view, these groups are also referred to as domains.
+
+PAPR interface currently supports different ways of communicating these resource
+grouping details to the OS. These are referred to as Form 0, Form 1 and Form2
+associativity grouping. Form 0 is the oldest format and is now considered deprecated.
+
+Hypervisor indicates the type/form of associativity used via "ibm,architecture-vec-5 property".
+Bit 0 of byte 5 in the "ibm,architecture-vec-5" property indicates usage of Form 0 or Form 1.
+A value of 1 indicates the usage of Form 1 associativity. For Form 2 associativity
+bit 2 of byte 5 in the "ibm,architecture-vec-5" property is used.
+
+Form 0
+------
+Form 0 associativity supports only two NUMA distances (LOCAL and REMOTE).
+
+Form 1
+------
+With Form 1 a combination of ibm,associativity-reference-points, and ibm,associativity
+device tree properties are used to determine the NUMA distance between resource groups/domains.
+
+The “ibm,associativity” property contains a list of one or more numbers (domainID)
+representing the resource’s platform grouping domains.
+
+The “ibm,associativity-reference-points” property contains a list of one or more numbers
+(domainID index) that represents the 1 based ordinal in the associativity lists.
+The list of domainID indexes represents an increasing hierarchy of resource grouping.
+
+ex:
+{ primary domainID index, secondary domainID index, tertiary domainID index.. }
+
+Linux kernel uses the domainID at the primary domainID index as the NUMA node id.
+Linux kernel computes NUMA distance between two domains by recursively comparing
+if they belong to the same higher-level domains. For mismatch at every higher
+level of the resource group, the kernel doubles the NUMA distance between the
+comparing domains.
+
+Form 2
+-------
+Form 2 associativity format adds separate device tree properties representing NUMA node distance
+thereby making the node distance computation flexible. Form 2 also allows flexible primary
+domain numbering. With numa distance computation now detached from the index value in
+"ibm,associativity-reference-points" property, Form 2 allows a large number of primary domain
+ids at the same domainID index representing resource groups of different performance/latency
+characteristics.
+
+Hypervisor indicates the usage of FORM2 associativity using bit 2 of byte 5 in the
+"ibm,architecture-vec-5" property.
+
+"ibm,numa-lookup-index-table" property contains a list of one or more numbers representing
+the domainIDs present in the system. The offset of the domainID in this property is
+used as an index while computing numa distance information via "ibm,numa-distance-table".
+
+prop-encoded-array: The number N of the domainIDs encoded as with encode-int, followed by
+N domainID encoded as with encode-int
+
+For ex:
+"ibm,numa-lookup-index-table" = {4, 0, 8, 250, 252}. The offset of domainID 8 (2) is used when
+computing the distance of domain 8 from other domains present in the system. For the rest of
+this document, this offset will be referred to as domain distance offset.
+
+"ibm,numa-distance-table" property contains a list of one or more numbers representing the NUMA
+distance between resource groups/domains present in the system.
+
+prop-encoded-array: The number N of the distance values encoded as with encode-int, followed by
+N distance values encoded as with encode-bytes. The max distance value we could encode is 255.
+The number N must be equal to the square of m where m is the number of domainIDs in the
+numa-lookup-index-table.
+
+For ex:
+ibm,numa-lookup-index-table = <3 0 8 40>;
+ibm,numa-distace-table = <9>, /bits/ 8 < 10 20 80 20 10 160 80 160 10>;
+
+::
+
+ | 0 8 40
+ --|------------
+ |
+ 0 | 10 20 80
+ |
+ 8 | 20 10 160
+ |
+ 40| 80 160 10
+
+A possible "ibm,associativity" property for resources in node 0, 8 and 40
+
+{ 3, 6, 7, 0 }
+{ 3, 6, 9, 8 }
+{ 3, 6, 7, 40}
+
+With "ibm,associativity-reference-points" { 0x3 }
+
+"ibm,lookup-index-table" helps in having a compact representation of distance matrix.
+Since domainID can be sparse, the matrix of distances can also be effectively sparse.
+With "ibm,lookup-index-table" we can achieve a compact representation of
+distance information.
diff --git a/Documentation/arch/powerpc/booting.rst b/Documentation/arch/powerpc/booting.rst
new file mode 100644
index 0000000000..11aa440f98
--- /dev/null
+++ b/Documentation/arch/powerpc/booting.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+DeviceTree Booting
+------------------
+
+During the development of the Linux/ppc64 kernel, and more specifically, the
+addition of new platform types outside of the old IBM pSeries/iSeries pair, it
+was decided to enforce some strict rules regarding the kernel entry and
+bootloader <-> kernel interfaces, in order to avoid the degeneration that had
+become the ppc32 kernel entry point and the way a new platform should be added
+to the kernel. The legacy iSeries platform breaks those rules as it predates
+this scheme, but no new board support will be accepted in the main tree that
+doesn't follow them properly. In addition, since the advent of the arch/powerpc
+merged architecture for ppc32 and ppc64, new 32-bit platforms and 32-bit
+platforms which move into arch/powerpc will be required to use these rules as
+well.
+
+The main requirement that will be defined in more detail below is the presence
+of a device-tree whose format is defined after Open Firmware specification.
+However, in order to make life easier to embedded board vendors, the kernel
+doesn't require the device-tree to represent every device in the system and only
+requires some nodes and properties to be present. For example, the kernel does
+not require you to create a node for every PCI device in the system. It is a
+requirement to have a node for PCI host bridges in order to provide interrupt
+routing information and memory/IO ranges, among others. It is also recommended
+to define nodes for on chip devices and other buses that don't specifically fit
+in an existing OF specification. This creates a great flexibility in the way the
+kernel can then probe those and match drivers to device, without having to hard
+code all sorts of tables. It also makes it more flexible for board vendors to do
+minor hardware upgrades without significantly impacting the kernel code or
+cluttering it with special cases.
+
+
+Entry point
+~~~~~~~~~~~
+
+There is one single entry point to the kernel, at the start
+of the kernel image. That entry point supports two calling
+conventions:
+
+ a) Boot from Open Firmware. If your firmware is compatible
+ with Open Firmware (IEEE 1275) or provides an OF compatible
+ client interface API (support for "interpret" callback of
+ forth words isn't required), you can enter the kernel with:
+
+ r5 : OF callback pointer as defined by IEEE 1275
+ bindings to powerpc. Only the 32-bit client interface
+ is currently supported
+
+ r3, r4 : address & length of an initrd if any or 0
+
+ The MMU is either on or off; the kernel will run the
+ trampoline located in arch/powerpc/kernel/prom_init.c to
+ extract the device-tree and other information from open
+ firmware and build a flattened device-tree as described
+ in b). prom_init() will then re-enter the kernel using
+ the second method. This trampoline code runs in the
+ context of the firmware, which is supposed to handle all
+ exceptions during that time.
+
+ b) Direct entry with a flattened device-tree block. This entry
+ point is called by a) after the OF trampoline and can also be
+ called directly by a bootloader that does not support the Open
+ Firmware client interface. It is also used by "kexec" to
+ implement "hot" booting of a new kernel from a previous
+ running one. This method is what I will describe in more
+ details in this document, as method a) is simply standard Open
+ Firmware, and thus should be implemented according to the
+ various standard documents defining it and its binding to the
+ PowerPC platform. The entry point definition then becomes:
+
+ r3 : physical pointer to the device-tree block
+ (defined in chapter II) in RAM
+
+ r4 : physical pointer to the kernel itself. This is
+ used by the assembly code to properly disable the MMU
+ in case you are entering the kernel with MMU enabled
+ and a non-1:1 mapping.
+
+ r5 : NULL (as to differentiate with method a)
+
+Note about SMP entry: Either your firmware puts your other
+CPUs in some sleep loop or spin loop in ROM where you can get
+them out via a soft reset or some other means, in which case
+you don't need to care, or you'll have to enter the kernel
+with all CPUs. The way to do that with method b) will be
+described in a later revision of this document.
+
+Board supports (platforms) are not exclusive config options. An
+arbitrary set of board supports can be built in a single kernel
+image. The kernel will "know" what set of functions to use for a
+given platform based on the content of the device-tree. Thus, you
+should:
+
+ a) add your platform support as a _boolean_ option in
+ arch/powerpc/Kconfig, following the example of PPC_PSERIES,
+ PPC_PMAC and PPC_MAPLE. The latter is probably a good
+ example of a board support to start from.
+
+ b) create your main platform file as
+ "arch/powerpc/platforms/myplatform/myboard_setup.c" and add it
+ to the Makefile under the condition of your ``CONFIG_``
+ option. This file will define a structure of type "ppc_md"
+ containing the various callbacks that the generic code will
+ use to get to your platform specific code
+
+A kernel image may support multiple platforms, but only if the
+platforms feature the same core architecture. A single kernel build
+cannot support both configurations with Book E and configurations
+with classic Powerpc architectures.
diff --git a/Documentation/arch/powerpc/bootwrapper.rst b/Documentation/arch/powerpc/bootwrapper.rst
new file mode 100644
index 0000000000..cdfa2bc842
--- /dev/null
+++ b/Documentation/arch/powerpc/bootwrapper.rst
@@ -0,0 +1,131 @@
+========================
+The PowerPC boot wrapper
+========================
+
+Copyright (C) Secret Lab Technologies Ltd.
+
+PowerPC image targets compresses and wraps the kernel image (vmlinux) with
+a boot wrapper to make it usable by the system firmware. There is no
+standard PowerPC firmware interface, so the boot wrapper is designed to
+be adaptable for each kind of image that needs to be built.
+
+The boot wrapper can be found in the arch/powerpc/boot/ directory. The
+Makefile in that directory has targets for all the available image types.
+The different image types are used to support all of the various firmware
+interfaces found on PowerPC platforms. OpenFirmware is the most commonly
+used firmware type on general purpose PowerPC systems from Apple, IBM and
+others. U-Boot is typically found on embedded PowerPC hardware, but there
+are a handful of other firmware implementations which are also popular. Each
+firmware interface requires a different image format.
+
+The boot wrapper is built from the makefile in arch/powerpc/boot/Makefile and
+it uses the wrapper script (arch/powerpc/boot/wrapper) to generate target
+image. The details of the build system is discussed in the next section.
+Currently, the following image format targets exist:
+
+ ==================== ========================================================
+ cuImage.%: Backwards compatible uImage for older version of
+ U-Boot (for versions that don't understand the device
+ tree). This image embeds a device tree blob inside
+ the image. The boot wrapper, kernel and device tree
+ are all embedded inside the U-Boot uImage file format
+ with boot wrapper code that extracts data from the old
+ bd_info structure and loads the data into the device
+ tree before jumping into the kernel.
+
+ Because of the series of #ifdefs found in the
+ bd_info structure used in the old U-Boot interfaces,
+ cuImages are platform specific. Each specific
+ U-Boot platform has a different platform init file
+ which populates the embedded device tree with data
+ from the platform specific bd_info file. The platform
+ specific cuImage platform init code can be found in
+ `arch/powerpc/boot/cuboot.*.c`. Selection of the correct
+ cuImage init code for a specific board can be found in
+ the wrapper structure.
+
+ dtbImage.%: Similar to zImage, except device tree blob is embedded
+ inside the image instead of provided by firmware. The
+ output image file can be either an elf file or a flat
+ binary depending on the platform.
+
+ dtbImages are used on systems which do not have an
+ interface for passing a device tree directly.
+ dtbImages are similar to simpleImages except that
+ dtbImages have platform specific code for extracting
+ data from the board firmware, but simpleImages do not
+ talk to the firmware at all.
+
+ PlayStation 3 support uses dtbImage. So do Embedded
+ Planet boards using the PlanetCore firmware. Board
+ specific initialization code is typically found in a
+ file named arch/powerpc/boot/<platform>.c; but this
+ can be overridden by the wrapper script.
+
+ simpleImage.%: Firmware independent compressed image that does not
+ depend on any particular firmware interface and embeds
+ a device tree blob. This image is a flat binary that
+ can be loaded to any location in RAM and jumped to.
+ Firmware cannot pass any configuration data to the
+ kernel with this image type and it depends entirely on
+ the embedded device tree for all information.
+
+ treeImage.%; Image format for used with OpenBIOS firmware found
+ on some ppc4xx hardware. This image embeds a device
+ tree blob inside the image.
+
+ uImage: Native image format used by U-Boot. The uImage target
+ does not add any boot code. It just wraps a compressed
+ vmlinux in the uImage data structure. This image
+ requires a version of U-Boot that is able to pass
+ a device tree to the kernel at boot. If using an older
+ version of U-Boot, then you need to use a cuImage
+ instead.
+
+ zImage.%: Image format which does not embed a device tree.
+ Used by OpenFirmware and other firmware interfaces
+ which are able to supply a device tree. This image
+ expects firmware to provide the device tree at boot.
+ Typically, if you have general purpose PowerPC
+ hardware then you want this image format.
+ ==================== ========================================================
+
+Image types which embed a device tree blob (simpleImage, dtbImage, treeImage,
+and cuImage) all generate the device tree blob from a file in the
+arch/powerpc/boot/dts/ directory. The Makefile selects the correct device
+tree source based on the name of the target. Therefore, if the kernel is
+built with 'make treeImage.walnut', then the build system will use
+arch/powerpc/boot/dts/walnut.dts to build treeImage.walnut.
+
+Two special targets called 'zImage' and 'zImage.initrd' also exist. These
+targets build all the default images as selected by the kernel configuration.
+Default images are selected by the boot wrapper Makefile
+(arch/powerpc/boot/Makefile) by adding targets to the $image-y variable. Look
+at the Makefile to see which default image targets are available.
+
+How it is built
+---------------
+arch/powerpc is designed to support multiplatform kernels, which means
+that a single vmlinux image can be booted on many different target boards.
+It also means that the boot wrapper must be able to wrap for many kinds of
+images on a single build. The design decision was made to not use any
+conditional compilation code (#ifdef, etc) in the boot wrapper source code.
+All of the boot wrapper pieces are buildable at any time regardless of the
+kernel configuration. Building all the wrapper bits on every kernel build
+also ensures that obscure parts of the wrapper are at the very least compile
+tested in a large variety of environments.
+
+The wrapper is adapted for different image types at link time by linking in
+just the wrapper bits that are appropriate for the image type. The 'wrapper
+script' (found in arch/powerpc/boot/wrapper) is called by the Makefile and
+is responsible for selecting the correct wrapper bits for the image type.
+The arguments are well documented in the script's comment block, so they
+are not repeated here. However, it is worth mentioning that the script
+uses the -p (platform) argument as the main method of deciding which wrapper
+bits to compile in. Look for the large 'case "$platform" in' block in the
+middle of the script. This is also the place where platform specific fixups
+can be selected by changing the link order.
+
+In particular, care should be taken when working with cuImages. cuImage
+wrapper bits are very board specific and care should be taken to make sure
+the target you are trying to build is supported by the wrapper bits.
diff --git a/Documentation/arch/powerpc/cpu_families.rst b/Documentation/arch/powerpc/cpu_families.rst
new file mode 100644
index 0000000000..eb7e60649b
--- /dev/null
+++ b/Documentation/arch/powerpc/cpu_families.rst
@@ -0,0 +1,237 @@
+============
+CPU Families
+============
+
+This document tries to summarise some of the different cpu families that exist
+and are supported by arch/powerpc.
+
+
+Book3S (aka sPAPR)
+------------------
+
+- Hash MMU (except 603 and e300)
+- Radix MMU (POWER9 and later)
+- Software loaded TLB (603 and e300)
+- Selectable Software loaded TLB in addition to hash MMU (755, 7450, e600)
+- Mix of 32 & 64 bit::
+
+ +--------------+ +----------------+
+ | Old POWER | --------------> | RS64 (threads) |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+ +----------------+ +------+
+ | 601 | --------------> | 603 | ---> | e300 |
+ +--------------+ +----------------+ +------+
+ | |
+ | |
+ v v
+ +--------------+ +-----+ +----------------+ +-------+
+ | 604 | | 755 | <--- | 750 (G3) | ---> | 750CX |
+ +--------------+ +-----+ +----------------+ +-------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +----------------+ +-------+
+ | 620 (64 bit) | | 7400 | | 750CL |
+ +--------------+ +----------------+ +-------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +----------------+ +-------+
+ | POWER3/630 | | 7410 | | 750FX |
+ +--------------+ +----------------+ +-------+
+ | |
+ | |
+ v v
+ +--------------+ +----------------+
+ | POWER3+ | | 7450 |
+ +--------------+ +----------------+
+ | |
+ | |
+ v v
+ +--------------+ +----------------+
+ | POWER4 | | 7455 |
+ +--------------+ +----------------+
+ | |
+ | |
+ v v
+ +--------------+ +-------+ +----------------+
+ | POWER4+ | --> | 970 | | 7447 |
+ +--------------+ +-------+ +----------------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +-------+ +----------------+
+ | POWER5 | | 970FX | | 7448 |
+ +--------------+ +-------+ +----------------+
+ | | |
+ | | |
+ v v v
+ +--------------+ +-------+ +----------------+
+ | POWER5+ | | 970MP | | e600 |
+ +--------------+ +-------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER5++ |
+ +--------------+
+ |
+ |
+ v
+ +--------------+ +-------+
+ | POWER6 | <-?-> | Cell |
+ +--------------+ +-------+
+ |
+ |
+ v
+ +--------------+
+ | POWER7 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER7+ |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER8 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER9 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | POWER10 |
+ +--------------+
+
+
+ +---------------+
+ | PA6T (64 bit) |
+ +---------------+
+
+
+IBM BookE
+---------
+
+- Software loaded TLB.
+- All 32 bit::
+
+ +--------------+
+ | 401 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 403 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 405 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 440 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+ +----------------+
+ | 450 | --> | BG/P |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | 460 |
+ +--------------+
+ |
+ |
+ v
+ +--------------+
+ | 476 |
+ +--------------+
+
+
+Motorola/Freescale 8xx
+----------------------
+
+- Software loaded with hardware assist.
+- All 32 bit::
+
+ +-------------+
+ | MPC8xx Core |
+ +-------------+
+
+
+Freescale BookE
+---------------
+
+- Software loaded TLB.
+- e6500 adds HW loaded indirect TLB entries.
+- Mix of 32 & 64 bit::
+
+ +--------------+
+ | e200 |
+ +--------------+
+
+
+ +--------------------------------+
+ | e500 |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e500v2 |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e500mc (Book3e) |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e5500 (64 bit) |
+ +--------------------------------+
+ |
+ |
+ v
+ +--------------------------------+
+ | e6500 (HW TLB) (Multithreaded) |
+ +--------------------------------+
+
+
+IBM A2 core
+-----------
+
+- Book3E, software loaded TLB + HW loaded indirect TLB entries.
+- 64 bit::
+
+ +--------------+ +----------------+
+ | A2 core | --> | WSP |
+ +--------------+ +----------------+
+ |
+ |
+ v
+ +--------------+
+ | BG/Q |
+ +--------------+
diff --git a/Documentation/arch/powerpc/cpu_features.rst b/Documentation/arch/powerpc/cpu_features.rst
new file mode 100644
index 0000000000..b7bcdd2f41
--- /dev/null
+++ b/Documentation/arch/powerpc/cpu_features.rst
@@ -0,0 +1,60 @@
+============
+CPU Features
+============
+
+Hollis Blanchard <hollis@austin.ibm.com>
+5 Jun 2002
+
+This document describes the system (including self-modifying code) used in the
+PPC Linux kernel to support a variety of PowerPC CPUs without requiring
+compile-time selection.
+
+Early in the boot process the ppc32 kernel detects the current CPU type and
+chooses a set of features accordingly. Some examples include Altivec support,
+split instruction and data caches, and if the CPU supports the DOZE and NAP
+sleep modes.
+
+Detection of the feature set is simple. A list of processors can be found in
+arch/powerpc/kernel/cputable.c. The PVR register is masked and compared with
+each value in the list. If a match is found, the cpu_features of cur_cpu_spec
+is assigned to the feature bitmask for this processor and a __setup_cpu
+function is called.
+
+C code may test 'cur_cpu_spec[smp_processor_id()]->cpu_features' for a
+particular feature bit. This is done in quite a few places, for example
+in ppc_setup_l2cr().
+
+Implementing cpufeatures in assembly is a little more involved. There are
+several paths that are performance-critical and would suffer if an array
+index, structure dereference, and conditional branch were added. To avoid the
+performance penalty but still allow for runtime (rather than compile-time) CPU
+selection, unused code is replaced by 'nop' instructions. This nop'ing is
+based on CPU 0's capabilities, so a multi-processor system with non-identical
+processors will not work (but such a system would likely have other problems
+anyways).
+
+After detecting the processor type, the kernel patches out sections of code
+that shouldn't be used by writing nop's over it. Using cpufeatures requires
+just 2 macros (found in arch/powerpc/include/asm/cputable.h), as seen in head.S
+transfer_to_handler::
+
+ #ifdef CONFIG_ALTIVEC
+ BEGIN_FTR_SECTION
+ mfspr r22,SPRN_VRSAVE /* if G4, save vrsave register value */
+ stw r22,THREAD_VRSAVE(r23)
+ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ #endif /* CONFIG_ALTIVEC */
+
+If CPU 0 supports Altivec, the code is left untouched. If it doesn't, both
+instructions are replaced with nop's.
+
+The END_FTR_SECTION macro has two simpler variations: END_FTR_SECTION_IFSET
+and END_FTR_SECTION_IFCLR. These simply test if a flag is set (in
+cur_cpu_spec[0]->cpu_features) or is cleared, respectively. These two macros
+should be used in the majority of cases.
+
+The END_FTR_SECTION macros are implemented by storing information about this
+code in the '__ftr_fixup' ELF section. When do_cpu_ftr_fixups
+(arch/powerpc/kernel/misc.S) is invoked, it will iterate over the records in
+__ftr_fixup, and if the required feature is not present it will loop writing
+nop's from each BEGIN_FTR_SECTION to END_FTR_SECTION.
diff --git a/Documentation/arch/powerpc/cxl.rst b/Documentation/arch/powerpc/cxl.rst
new file mode 100644
index 0000000000..d2d7705761
--- /dev/null
+++ b/Documentation/arch/powerpc/cxl.rst
@@ -0,0 +1,469 @@
+====================================
+Coherent Accelerator Interface (CXL)
+====================================
+
+Introduction
+============
+
+ The coherent accelerator interface is designed to allow the
+ coherent connection of accelerators (FPGAs and other devices) to a
+ POWER system. These devices need to adhere to the Coherent
+ Accelerator Interface Architecture (CAIA).
+
+ IBM refers to this as the Coherent Accelerator Processor Interface
+ or CAPI. In the kernel it's referred to by the name CXL to avoid
+ confusion with the ISDN CAPI subsystem.
+
+ Coherent in this context means that the accelerator and CPUs can
+ both access system memory directly and with the same effective
+ addresses.
+
+
+Hardware overview
+=================
+
+ ::
+
+ POWER8/9 FPGA
+ +----------+ +---------+
+ | | | |
+ | CPU | | AFU |
+ | | | |
+ | | | |
+ | | | |
+ +----------+ +---------+
+ | PHB | | |
+ | +------+ | PSL |
+ | | CAPP |<------>| |
+ +---+------+ PCIE +---------+
+
+ The POWER8/9 chip has a Coherently Attached Processor Proxy (CAPP)
+ unit which is part of the PCIe Host Bridge (PHB). This is managed
+ by Linux by calls into OPAL. Linux doesn't directly program the
+ CAPP.
+
+ The FPGA (or coherently attached device) consists of two parts.
+ The POWER Service Layer (PSL) and the Accelerator Function Unit
+ (AFU). The AFU is used to implement specific functionality behind
+ the PSL. The PSL, among other things, provides memory address
+ translation services to allow each AFU direct access to userspace
+ memory.
+
+ The AFU is the core part of the accelerator (eg. the compression,
+ crypto etc function). The kernel has no knowledge of the function
+ of the AFU. Only userspace interacts directly with the AFU.
+
+ The PSL provides the translation and interrupt services that the
+ AFU needs. This is what the kernel interacts with. For example, if
+ the AFU needs to read a particular effective address, it sends
+ that address to the PSL, the PSL then translates it, fetches the
+ data from memory and returns it to the AFU. If the PSL has a
+ translation miss, it interrupts the kernel and the kernel services
+ the fault. The context to which this fault is serviced is based on
+ who owns that acceleration function.
+
+ - POWER8 and PSL Version 8 are compliant to the CAIA Version 1.0.
+ - POWER9 and PSL Version 9 are compliant to the CAIA Version 2.0.
+
+ This PSL Version 9 provides new features such as:
+
+ * Interaction with the nest MMU on the P9 chip.
+ * Native DMA support.
+ * Supports sending ASB_Notify messages for host thread wakeup.
+ * Supports Atomic operations.
+ * etc.
+
+ Cards with a PSL9 won't work on a POWER8 system and cards with a
+ PSL8 won't work on a POWER9 system.
+
+AFU Modes
+=========
+
+ There are two programming modes supported by the AFU. Dedicated
+ and AFU directed. AFU may support one or both modes.
+
+ When using dedicated mode only one MMU context is supported. In
+ this mode, only one userspace process can use the accelerator at
+ time.
+
+ When using AFU directed mode, up to 16K simultaneous contexts can
+ be supported. This means up to 16K simultaneous userspace
+ applications may use the accelerator (although specific AFUs may
+ support fewer). In this mode, the AFU sends a 16 bit context ID
+ with each of its requests. This tells the PSL which context is
+ associated with each operation. If the PSL can't translate an
+ operation, the ID can also be accessed by the kernel so it can
+ determine the userspace context associated with an operation.
+
+
+MMIO space
+==========
+
+ A portion of the accelerator MMIO space can be directly mapped
+ from the AFU to userspace. Either the whole space can be mapped or
+ just a per context portion. The hardware is self describing, hence
+ the kernel can determine the offset and size of the per context
+ portion.
+
+
+Interrupts
+==========
+
+ AFUs may generate interrupts that are destined for userspace. These
+ are received by the kernel as hardware interrupts and passed onto
+ userspace by a read syscall documented below.
+
+ Data storage faults and error interrupts are handled by the kernel
+ driver.
+
+
+Work Element Descriptor (WED)
+=============================
+
+ The WED is a 64-bit parameter passed to the AFU when a context is
+ started. Its format is up to the AFU hence the kernel has no
+ knowledge of what it represents. Typically it will be the
+ effective address of a work queue or status block where the AFU
+ and userspace can share control and status information.
+
+
+
+
+User API
+========
+
+1. AFU character devices
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+ For AFUs operating in AFU directed mode, two character device
+ files will be created. /dev/cxl/afu0.0m will correspond to a
+ master context and /dev/cxl/afu0.0s will correspond to a slave
+ context. Master contexts have access to the full MMIO space an
+ AFU provides. Slave contexts have access to only the per process
+ MMIO space an AFU provides.
+
+ For AFUs operating in dedicated process mode, the driver will
+ only create a single character device per AFU called
+ /dev/cxl/afu0.0d. This will have access to the entire MMIO space
+ that the AFU provides (like master contexts in AFU directed).
+
+ The types described below are defined in include/uapi/misc/cxl.h
+
+ The following file operations are supported on both slave and
+ master devices.
+
+ A userspace library libcxl is available here:
+
+ https://github.com/ibm-capi/libcxl
+
+ This provides a C interface to this kernel API.
+
+open
+----
+
+ Opens the device and allocates a file descriptor to be used with
+ the rest of the API.
+
+ A dedicated mode AFU only has one context and only allows the
+ device to be opened once.
+
+ An AFU directed mode AFU can have many contexts, the device can be
+ opened once for each context that is available.
+
+ When all available contexts are allocated the open call will fail
+ and return -ENOSPC.
+
+ Note:
+ IRQs need to be allocated for each context, which may limit
+ the number of contexts that can be created, and therefore
+ how many times the device can be opened. The POWER8 CAPP
+ supports 2040 IRQs and 3 are used by the kernel, so 2037 are
+ left. If 1 IRQ is needed per context, then only 2037
+ contexts can be allocated. If 4 IRQs are needed per context,
+ then only 2037/4 = 509 contexts can be allocated.
+
+
+ioctl
+-----
+
+ CXL_IOCTL_START_WORK:
+ Starts the AFU context and associates it with the current
+ process. Once this ioctl is successfully executed, all memory
+ mapped into this process is accessible to this AFU context
+ using the same effective addresses. No additional calls are
+ required to map/unmap memory. The AFU memory context will be
+ updated as userspace allocates and frees memory. This ioctl
+ returns once the AFU context is started.
+
+ Takes a pointer to a struct cxl_ioctl_start_work
+
+ ::
+
+ struct cxl_ioctl_start_work {
+ __u64 flags;
+ __u64 work_element_descriptor;
+ __u64 amr;
+ __s16 num_interrupts;
+ __s16 reserved1;
+ __s32 reserved2;
+ __u64 reserved3;
+ __u64 reserved4;
+ __u64 reserved5;
+ __u64 reserved6;
+ };
+
+ flags:
+ Indicates which optional fields in the structure are
+ valid.
+
+ work_element_descriptor:
+ The Work Element Descriptor (WED) is a 64-bit argument
+ defined by the AFU. Typically this is an effective
+ address pointing to an AFU specific structure
+ describing what work to perform.
+
+ amr:
+ Authority Mask Register (AMR), same as the powerpc
+ AMR. This field is only used by the kernel when the
+ corresponding CXL_START_WORK_AMR value is specified in
+ flags. If not specified the kernel will use a default
+ value of 0.
+
+ num_interrupts:
+ Number of userspace interrupts to request. This field
+ is only used by the kernel when the corresponding
+ CXL_START_WORK_NUM_IRQS value is specified in flags.
+ If not specified the minimum number required by the
+ AFU will be allocated. The min and max number can be
+ obtained from sysfs.
+
+ reserved fields:
+ For ABI padding and future extensions
+
+ CXL_IOCTL_GET_PROCESS_ELEMENT:
+ Get the current context id, also known as the process element.
+ The value is returned from the kernel as a __u32.
+
+
+mmap
+----
+
+ An AFU may have an MMIO space to facilitate communication with the
+ AFU. If it does, the MMIO space can be accessed via mmap. The size
+ and contents of this area are specific to the particular AFU. The
+ size can be discovered via sysfs.
+
+ In AFU directed mode, master contexts are allowed to map all of
+ the MMIO space and slave contexts are allowed to only map the per
+ process MMIO space associated with the context. In dedicated
+ process mode the entire MMIO space can always be mapped.
+
+ This mmap call must be done after the START_WORK ioctl.
+
+ Care should be taken when accessing MMIO space. Only 32 and 64-bit
+ accesses are supported by POWER8. Also, the AFU will be designed
+ with a specific endianness, so all MMIO accesses should consider
+ endianness (recommend endian(3) variants like: le64toh(),
+ be64toh() etc). These endian issues equally apply to shared memory
+ queues the WED may describe.
+
+
+read
+----
+
+ Reads events from the AFU. Blocks if no events are pending
+ (unless O_NONBLOCK is supplied). Returns -EIO in the case of an
+ unrecoverable error or if the card is removed.
+
+ read() will always return an integral number of events.
+
+ The buffer passed to read() must be at least 4K bytes.
+
+ The result of the read will be a buffer of one or more events,
+ each event is of type struct cxl_event, of varying size::
+
+ struct cxl_event {
+ struct cxl_event_header header;
+ union {
+ struct cxl_event_afu_interrupt irq;
+ struct cxl_event_data_storage fault;
+ struct cxl_event_afu_error afu_error;
+ };
+ };
+
+ The struct cxl_event_header is defined as
+
+ ::
+
+ struct cxl_event_header {
+ __u16 type;
+ __u16 size;
+ __u16 process_element;
+ __u16 reserved1;
+ };
+
+ type:
+ This defines the type of event. The type determines how
+ the rest of the event is structured. These types are
+ described below and defined by enum cxl_event_type.
+
+ size:
+ This is the size of the event in bytes including the
+ struct cxl_event_header. The start of the next event can
+ be found at this offset from the start of the current
+ event.
+
+ process_element:
+ Context ID of the event.
+
+ reserved field:
+ For future extensions and padding.
+
+ If the event type is CXL_EVENT_AFU_INTERRUPT then the event
+ structure is defined as
+
+ ::
+
+ struct cxl_event_afu_interrupt {
+ __u16 flags;
+ __u16 irq; /* Raised AFU interrupt number */
+ __u32 reserved1;
+ };
+
+ flags:
+ These flags indicate which optional fields are present
+ in this struct. Currently all fields are mandatory.
+
+ irq:
+ The IRQ number sent by the AFU.
+
+ reserved field:
+ For future extensions and padding.
+
+ If the event type is CXL_EVENT_DATA_STORAGE then the event
+ structure is defined as
+
+ ::
+
+ struct cxl_event_data_storage {
+ __u16 flags;
+ __u16 reserved1;
+ __u32 reserved2;
+ __u64 addr;
+ __u64 dsisr;
+ __u64 reserved3;
+ };
+
+ flags:
+ These flags indicate which optional fields are present in
+ this struct. Currently all fields are mandatory.
+
+ address:
+ The address that the AFU unsuccessfully attempted to
+ access. Valid accesses will be handled transparently by the
+ kernel but invalid accesses will generate this event.
+
+ dsisr:
+ This field gives information on the type of fault. It is a
+ copy of the DSISR from the PSL hardware when the address
+ fault occurred. The form of the DSISR is as defined in the
+ CAIA.
+
+ reserved fields:
+ For future extensions
+
+ If the event type is CXL_EVENT_AFU_ERROR then the event structure
+ is defined as
+
+ ::
+
+ struct cxl_event_afu_error {
+ __u16 flags;
+ __u16 reserved1;
+ __u32 reserved2;
+ __u64 error;
+ };
+
+ flags:
+ These flags indicate which optional fields are present in
+ this struct. Currently all fields are Mandatory.
+
+ error:
+ Error status from the AFU. Defined by the AFU.
+
+ reserved fields:
+ For future extensions and padding
+
+
+2. Card character device (powerVM guest only)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+ In a powerVM guest, an extra character device is created for the
+ card. The device is only used to write (flash) a new image on the
+ FPGA accelerator. Once the image is written and verified, the
+ device tree is updated and the card is reset to reload the updated
+ image.
+
+open
+----
+
+ Opens the device and allocates a file descriptor to be used with
+ the rest of the API. The device can only be opened once.
+
+ioctl
+-----
+
+CXL_IOCTL_DOWNLOAD_IMAGE / CXL_IOCTL_VALIDATE_IMAGE:
+ Starts and controls flashing a new FPGA image. Partial
+ reconfiguration is not supported (yet), so the image must contain
+ a copy of the PSL and AFU(s). Since an image can be quite large,
+ the caller may have to iterate, splitting the image in smaller
+ chunks.
+
+ Takes a pointer to a struct cxl_adapter_image::
+
+ struct cxl_adapter_image {
+ __u64 flags;
+ __u64 data;
+ __u64 len_data;
+ __u64 len_image;
+ __u64 reserved1;
+ __u64 reserved2;
+ __u64 reserved3;
+ __u64 reserved4;
+ };
+
+ flags:
+ These flags indicate which optional fields are present in
+ this struct. Currently all fields are mandatory.
+
+ data:
+ Pointer to a buffer with part of the image to write to the
+ card.
+
+ len_data:
+ Size of the buffer pointed to by data.
+
+ len_image:
+ Full size of the image.
+
+
+Sysfs Class
+===========
+
+ A cxl sysfs class is added under /sys/class/cxl to facilitate
+ enumeration and tuning of the accelerators. Its layout is
+ described in Documentation/ABI/testing/sysfs-class-cxl
+
+
+Udev rules
+==========
+
+ The following udev rules could be used to create a symlink to the
+ most logical chardev to use in any programming mode (afuX.Yd for
+ dedicated, afuX.Ys for afu directed), since the API is virtually
+ identical for each::
+
+ SUBSYSTEM=="cxl", ATTRS{mode}=="dedicated_process", SYMLINK="cxl/%b"
+ SUBSYSTEM=="cxl", ATTRS{mode}=="afu_directed", \
+ KERNEL=="afu[0-9]*.[0-9]*s", SYMLINK="cxl/%b"
diff --git a/Documentation/arch/powerpc/cxlflash.rst b/Documentation/arch/powerpc/cxlflash.rst
new file mode 100644
index 0000000000..e8f488acfa
--- /dev/null
+++ b/Documentation/arch/powerpc/cxlflash.rst
@@ -0,0 +1,433 @@
+================================
+Coherent Accelerator (CXL) Flash
+================================
+
+Introduction
+============
+
+ The IBM Power architecture provides support for CAPI (Coherent
+ Accelerator Power Interface), which is available to certain PCIe slots
+ on Power 8 systems. CAPI can be thought of as a special tunneling
+ protocol through PCIe that allow PCIe adapters to look like special
+ purpose co-processors which can read or write an application's
+ memory and generate page faults. As a result, the host interface to
+ an adapter running in CAPI mode does not require the data buffers to
+ be mapped to the device's memory (IOMMU bypass) nor does it require
+ memory to be pinned.
+
+ On Linux, Coherent Accelerator (CXL) kernel services present CAPI
+ devices as a PCI device by implementing a virtual PCI host bridge.
+ This abstraction simplifies the infrastructure and programming
+ model, allowing for drivers to look similar to other native PCI
+ device drivers.
+
+ CXL provides a mechanism by which user space applications can
+ directly talk to a device (network or storage) bypassing the typical
+ kernel/device driver stack. The CXL Flash Adapter Driver enables a
+ user space application direct access to Flash storage.
+
+ The CXL Flash Adapter Driver is a kernel module that sits in the
+ SCSI stack as a low level device driver (below the SCSI disk and
+ protocol drivers) for the IBM CXL Flash Adapter. This driver is
+ responsible for the initialization of the adapter, setting up the
+ special path for user space access, and performing error recovery. It
+ communicates directly the Flash Accelerator Functional Unit (AFU)
+ as described in Documentation/arch/powerpc/cxl.rst.
+
+ The cxlflash driver supports two, mutually exclusive, modes of
+ operation at the device (LUN) level:
+
+ - Any flash device (LUN) can be configured to be accessed as a
+ regular disk device (i.e.: /dev/sdc). This is the default mode.
+
+ - Any flash device (LUN) can be configured to be accessed from
+ user space with a special block library. This mode further
+ specifies the means of accessing the device and provides for
+ either raw access to the entire LUN (referred to as direct
+ or physical LUN access) or access to a kernel/AFU-mediated
+ partition of the LUN (referred to as virtual LUN access). The
+ segmentation of a disk device into virtual LUNs is assisted
+ by special translation services provided by the Flash AFU.
+
+Overview
+========
+
+ The Coherent Accelerator Interface Architecture (CAIA) introduces a
+ concept of a master context. A master typically has special privileges
+ granted to it by the kernel or hypervisor allowing it to perform AFU
+ wide management and control. The master may or may not be involved
+ directly in each user I/O, but at the minimum is involved in the
+ initial setup before the user application is allowed to send requests
+ directly to the AFU.
+
+ The CXL Flash Adapter Driver establishes a master context with the
+ AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
+ Adapter Problem Space Memory Map looks like this::
+
+ +-------------------------------+
+ | 512 * 64 KB User MMIO |
+ | (per context) |
+ | User Accessible |
+ +-------------------------------+
+ | 512 * 128 B per context |
+ | Provisioning and Control |
+ | Trusted Process accessible |
+ +-------------------------------+
+ | 64 KB Global |
+ | Trusted Process accessible |
+ +-------------------------------+
+
+ This driver configures itself into the SCSI software stack as an
+ adapter driver. The driver is the only entity that is considered a
+ Trusted Process to program the Provisioning and Control and Global
+ areas in the MMIO Space shown above. The master context driver
+ discovers all LUNs attached to the CXL Flash adapter and instantiates
+ scsi block devices (/dev/sdb, /dev/sdc etc.) for each unique LUN
+ seen from each path.
+
+ Once these scsi block devices are instantiated, an application
+ written to a specification provided by the block library may get
+ access to the Flash from user space (without requiring a system call).
+
+ This master context driver also provides a series of ioctls for this
+ block library to enable this user space access. The driver supports
+ two modes for accessing the block device.
+
+ The first mode is called a virtual mode. In this mode a single scsi
+ block device (/dev/sdb) may be carved up into any number of distinct
+ virtual LUNs. The virtual LUNs may be resized as long as the sum of
+ the sizes of all the virtual LUNs, along with the meta-data associated
+ with it does not exceed the physical capacity.
+
+ The second mode is called the physical mode. In this mode a single
+ block device (/dev/sdb) may be opened directly by the block library
+ and the entire space for the LUN is available to the application.
+
+ Only the physical mode provides persistence of the data. i.e. The
+ data written to the block device will survive application exit and
+ restart and also reboot. The virtual LUNs do not persist (i.e. do
+ not survive after the application terminates or the system reboots).
+
+
+Block library API
+=================
+
+ Applications intending to get access to the CXL Flash from user
+ space should use the block library, as it abstracts the details of
+ interfacing directly with the cxlflash driver that are necessary for
+ performing administrative actions (i.e.: setup, tear down, resize).
+ The block library can be thought of as a 'user' of services,
+ implemented as IOCTLs, that are provided by the cxlflash driver
+ specifically for devices (LUNs) operating in user space access
+ mode. While it is not a requirement that applications understand
+ the interface between the block library and the cxlflash driver,
+ a high-level overview of each supported service (IOCTL) is provided
+ below.
+
+ The block library can be found on GitHub:
+ http://github.com/open-power/capiflash
+
+
+CXL Flash Driver LUN IOCTLs
+===========================
+
+ Users, such as the block library, that wish to interface with a flash
+ device (LUN) via user space access need to use the services provided
+ by the cxlflash driver. As these services are implemented as ioctls,
+ a file descriptor handle must first be obtained in order to establish
+ the communication channel between a user and the kernel. This file
+ descriptor is obtained by opening the device special file associated
+ with the scsi disk device (/dev/sdb) that was created during LUN
+ discovery. As per the location of the cxlflash driver within the
+ SCSI protocol stack, this open is actually not seen by the cxlflash
+ driver. Upon successful open, the user receives a file descriptor
+ (herein referred to as fd1) that should be used for issuing the
+ subsequent ioctls listed below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+DK_CXLFLASH_ATTACH
+------------------
+
+ This ioctl obtains, initializes, and starts a context using the CXL
+ kernel services. These services specify a context id (u16) by which
+ to uniquely identify the context and its allocated resources. The
+ services additionally provide a second file descriptor (herein
+ referred to as fd2) that is used by the block library to initiate
+ memory mapped I/O (via mmap()) to the CXL flash device and poll for
+ completion events. This file descriptor is intentionally installed by
+ this driver and not the CXL kernel services to allow for intermediary
+ notification and access in the event of a non-user-initiated close(),
+ such as a killed process. This design point is described in further
+ detail in the description for the DK_CXLFLASH_DETACH ioctl.
+
+ There are a few important aspects regarding the "tokens" (context id
+ and fd2) that are provided back to the user:
+
+ - These tokens are only valid for the process under which they
+ were created. The child of a forked process cannot continue
+ to use the context id or file descriptor created by its parent
+ (see DK_CXLFLASH_VLUN_CLONE for further details).
+
+ - These tokens are only valid for the lifetime of the context and
+ the process under which they were created. Once either is
+ destroyed, the tokens are to be considered stale and subsequent
+ usage will result in errors.
+
+ - A valid adapter file descriptor (fd2 >= 0) is only returned on
+ the initial attach for a context. Subsequent attaches to an
+ existing context (DK_CXLFLASH_ATTACH_REUSE_CONTEXT flag present)
+ do not provide the adapter file descriptor as it was previously
+ made known to the application.
+
+ - When a context is no longer needed, the user shall detach from
+ the context via the DK_CXLFLASH_DETACH ioctl. When this ioctl
+ returns with a valid adapter file descriptor and the return flag
+ DK_CXLFLASH_APP_CLOSE_ADAP_FD is present, the application _must_
+ close the adapter file descriptor following a successful detach.
+
+ - When this ioctl returns with a valid fd2 and the return flag
+ DK_CXLFLASH_APP_CLOSE_ADAP_FD is present, the application _must_
+ close fd2 in the following circumstances:
+
+ + Following a successful detach of the last user of the context
+ + Following a successful recovery on the context's original fd2
+ + In the child process of a fork(), following a clone ioctl,
+ on the fd2 associated with the source context
+
+ - At any time, a close on fd2 will invalidate the tokens. Applications
+ should exercise caution to only close fd2 when appropriate (outlined
+ in the previous bullet) to avoid premature loss of I/O.
+
+DK_CXLFLASH_USER_DIRECT
+-----------------------
+ This ioctl is responsible for transitioning the LUN to direct
+ (physical) mode access and configuring the AFU for direct access from
+ user space on a per-context basis. Additionally, the block size and
+ last logical block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for direct access from user space by adding an
+ entry to the AFU's resource handle table. The index of the entry is
+ treated as a resource handle that is returned to the user. The user
+ is then able to use the handle to reference the LUN during I/O.
+
+DK_CXLFLASH_USER_VIRTUAL
+------------------------
+ This ioctl is responsible for transitioning the LUN to virtual mode
+ of access and configuring the AFU for virtual access from user space
+ on a per-context basis. Additionally, the block size and last logical
+ block address (LBA) are returned to the user.
+
+ As mentioned previously, when operating in user space access mode,
+ LUNs may be accessed in whole or in part. Only one mode is allowed
+ at a time and if one mode is active (outstanding references exist),
+ requests to use the LUN in a different mode are denied.
+
+ The AFU is configured for virtual access from user space by adding
+ an entry to the AFU's resource handle table. The index of the entry
+ is treated as a resource handle that is returned to the user. The
+ user is then able to use the handle to reference the LUN during I/O.
+
+ By default, the virtual LUN is created with a size of 0. The user
+ would need to use the DK_CXLFLASH_VLUN_RESIZE ioctl to adjust the grow
+ the virtual LUN to a desired size. To avoid having to perform this
+ resize for the initial creation of the virtual LUN, the user has the
+ option of specifying a size as part of the DK_CXLFLASH_USER_VIRTUAL
+ ioctl, such that when success is returned to the user, the
+ resource handle that is provided is already referencing provisioned
+ storage. This is reflected by the last LBA being a non-zero value.
+
+ When a LUN is accessible from more than one port, this ioctl will
+ return with the DK_CXLFLASH_ALL_PORTS_ACTIVE return flag set. This
+ provides the user with a hint that I/O can be retried in the event
+ of an I/O error as the LUN can be reached over multiple paths.
+
+DK_CXLFLASH_VLUN_RESIZE
+-----------------------
+ This ioctl is responsible for resizing a previously created virtual
+ LUN and will fail if invoked upon a LUN that is not in virtual
+ mode. Upon success, an updated last LBA is returned to the user
+ indicating the new size of the virtual LUN associated with the
+ resource handle.
+
+ The partitioning of virtual LUNs is jointly mediated by the cxlflash
+ driver and the AFU. An allocation table is kept for each LUN that is
+ operating in the virtual mode and used to program a LUN translation
+ table that the AFU references when provided with a resource handle.
+
+ This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+ In addition to returning a failure to user, cxlflash will also schedule
+ an asynchronous AFU reset. Should the user choose to retry the operation,
+ it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+ can either retry the operation or treat it as a failure.
+
+DK_CXLFLASH_RELEASE
+-------------------
+ This ioctl is responsible for releasing a previously obtained
+ reference to either a physical or virtual LUN. This can be
+ thought of as the inverse of the DK_CXLFLASH_USER_DIRECT or
+ DK_CXLFLASH_USER_VIRTUAL ioctls. Upon success, the resource handle
+ is no longer valid and the entry in the resource handle table is
+ made available to be used again.
+
+ As part of the release process for virtual LUNs, the virtual LUN
+ is first resized to 0 to clear out and free the translation tables
+ associated with the virtual LUN reference.
+
+DK_CXLFLASH_DETACH
+------------------
+ This ioctl is responsible for unregistering a context with the
+ cxlflash driver and release outstanding resources that were
+ not explicitly released via the DK_CXLFLASH_RELEASE ioctl. Upon
+ success, all "tokens" which had been provided to the user from the
+ DK_CXLFLASH_ATTACH onward are no longer valid.
+
+ When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+ attach, the application _must_ close the fd2 associated with the context
+ following the detach of the final user of the context.
+
+DK_CXLFLASH_VLUN_CLONE
+----------------------
+ This ioctl is responsible for cloning a previously created
+ context to a more recently created context. It exists solely to
+ support maintaining user space access to storage after a process
+ forks. Upon success, the child process (which invoked the ioctl)
+ will have access to the same LUNs via the same resource handle(s)
+ as the parent, but under a different context.
+
+ Context sharing across processes is not supported with CXL and
+ therefore each fork must be met with establishing a new context
+ for the child process. This ioctl simplifies the state management
+ and playback required by a user in such a scenario. When a process
+ forks, child process can clone the parents context by first creating
+ a context (via DK_CXLFLASH_ATTACH) and then using this ioctl to
+ perform the clone from the parent to the child.
+
+ The clone itself is fairly simple. The resource handle and lun
+ translation tables are copied from the parent context to the child's
+ and then synced with the AFU.
+
+ When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+ attach, the application _must_ close the fd2 associated with the source
+ context (still resident/accessible in the parent process) following the
+ clone. This is to avoid a stale entry in the file descriptor table of the
+ child process.
+
+ This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+ In addition to returning a failure to user, cxlflash will also schedule
+ an asynchronous AFU reset. Should the user choose to retry the operation,
+ it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+ can either retry the operation or treat it as a failure.
+
+DK_CXLFLASH_VERIFY
+------------------
+ This ioctl is used to detect various changes such as the capacity of
+ the disk changing, the number of LUNs visible changing, etc. In cases
+ where the changes affect the application (such as a LUN resize), the
+ cxlflash driver will report the changed state to the application.
+
+ The user calls in when they want to validate that a LUN hasn't been
+ changed in response to a check condition. As the user is operating out
+ of band from the kernel, they will see these types of events without
+ the kernel's knowledge. When encountered, the user's architected
+ behavior is to call in to this ioctl, indicating what they want to
+ verify and passing along any appropriate information. For now, only
+ verifying a LUN change (ie: size different) with sense data is
+ supported.
+
+DK_CXLFLASH_RECOVER_AFU
+-----------------------
+ This ioctl is used to drive recovery (if such an action is warranted)
+ of a specified user context. Any state associated with the user context
+ is re-established upon successful recovery.
+
+ User contexts are put into an error condition when the device needs to
+ be reset or is terminating. Users are notified of this error condition
+ by seeing all 0xF's on an MMIO read. Upon encountering this, the
+ architected behavior for a user is to call into this ioctl to recover
+ their context. A user may also call into this ioctl at any time to
+ check if the device is operating normally. If a failure is returned
+ from this ioctl, the user is expected to gracefully clean up their
+ context via release/detach ioctls. Until they do, the context they
+ hold is not relinquished. The user may also optionally exit the process
+ at which time the context/resources they held will be freed as part of
+ the release fop.
+
+ When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+ attach, the application _must_ unmap and close the fd2 associated with the
+ original context following this ioctl returning success and indicating that
+ the context was recovered (DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET).
+
+DK_CXLFLASH_MANAGE_LUN
+----------------------
+ This ioctl is used to switch a LUN from a mode where it is available
+ for file-system access (legacy), to a mode where it is set aside for
+ exclusive user space access (superpipe). In case a LUN is visible
+ across multiple ports and adapters, this ioctl is used to uniquely
+ identify each LUN by its World Wide Node Name (WWNN).
+
+
+CXL Flash Driver Host IOCTLs
+============================
+
+ Each host adapter instance that is supported by the cxlflash driver
+ has a special character device associated with it to enable a set of
+ host management function. These character devices are hosted in a
+ class dedicated for cxlflash and can be accessed via `/dev/cxlflash/*`.
+
+ Applications can be written to perform various functions using the
+ host ioctl APIs below.
+
+ The structure definitions for these IOCTLs are available in:
+ uapi/scsi/cxlflash_ioctl.h
+
+HT_CXLFLASH_LUN_PROVISION
+-------------------------
+ This ioctl is used to create and delete persistent LUNs on cxlflash
+ devices that lack an external LUN management interface. It is only
+ valid when used with AFUs that support the LUN provision capability.
+
+ When sufficient space is available, LUNs can be created by specifying
+ the target port to host the LUN and a desired size in 4K blocks. Upon
+ success, the LUN ID and WWID of the created LUN will be returned and
+ the SCSI bus can be scanned to detect the change in LUN topology. Note
+ that partial allocations are not supported. Should a creation fail due
+ to a space issue, the target port can be queried for its current LUN
+ geometry.
+
+ To remove a LUN, the device must first be disassociated from the Linux
+ SCSI subsystem. The LUN deletion can then be initiated by specifying a
+ target port and LUN ID. Upon success, the LUN geometry associated with
+ the port will be updated to reflect new number of provisioned LUNs and
+ available capacity.
+
+ To query the LUN geometry of a port, the target port is specified and
+ upon success, the following information is presented:
+
+ - Maximum number of provisioned LUNs allowed for the port
+ - Current number of provisioned LUNs for the port
+ - Maximum total capacity of provisioned LUNs for the port (4K blocks)
+ - Current total capacity of provisioned LUNs for the port (4K blocks)
+
+ With this information, the number of available LUNs and capacity can be
+ can be calculated.
+
+HT_CXLFLASH_AFU_DEBUG
+---------------------
+ This ioctl is used to debug AFUs by supporting a command pass-through
+ interface. It is only valid when used with AFUs that support the AFU
+ debug capability.
+
+ With exception of buffer management, AFU debug commands are opaque to
+ cxlflash and treated as pass-through. For debug commands that do require
+ data transfer, the user supplies an adequately sized data buffer and must
+ specify the data transfer direction with respect to the host. There is a
+ maximum transfer size of 256K imposed. Note that partial read completions
+ are not supported - when errors are experienced with a host read data
+ transfer, the data buffer is not copied back to the user.
diff --git a/Documentation/arch/powerpc/dawr-power9.rst b/Documentation/arch/powerpc/dawr-power9.rst
new file mode 100644
index 0000000000..310f2e0cea
--- /dev/null
+++ b/Documentation/arch/powerpc/dawr-power9.rst
@@ -0,0 +1,101 @@
+=====================
+DAWR issues on POWER9
+=====================
+
+On older POWER9 processors, the Data Address Watchpoint Register (DAWR) can
+cause a checkstop if it points to cache inhibited (CI) memory. Currently Linux
+has no way to distinguish CI memory when configuring the DAWR, so on affected
+systems, the DAWR is disabled.
+
+Affected processor revisions
+============================
+
+This issue is only present on processors prior to v2.3. The revision can be
+found in /proc/cpuinfo::
+
+ processor : 0
+ cpu : POWER9, altivec supported
+ clock : 3800.000000MHz
+ revision : 2.3 (pvr 004e 1203)
+
+On a system with the issue, the DAWR is disabled as detailed below.
+
+Technical Details:
+==================
+
+DAWR has 6 different ways of being set.
+1) ptrace
+2) h_set_mode(DAWR)
+3) h_set_dabr()
+4) kvmppc_set_one_reg()
+5) xmon
+
+For ptrace, we now advertise zero breakpoints on POWER9 via the
+PPC_PTRACE_GETHWDBGINFO call. This results in GDB falling back to
+software emulation of the watchpoint (which is slow).
+
+h_set_mode(DAWR) and h_set_dabr() will now return an error to the
+guest on a POWER9 host. Current Linux guests ignore this error, so
+they will silently not get the DAWR.
+
+kvmppc_set_one_reg() will store the value in the vcpu but won't
+actually set it on POWER9 hardware. This is done so we don't break
+migration from POWER8 to POWER9, at the cost of silently losing the
+DAWR on the migration.
+
+For xmon, the 'bd' command will return an error on P9.
+
+Consequences for users
+======================
+
+For GDB watchpoints (ie 'watch' command) on POWER9 bare metal , GDB
+will accept the command. Unfortunately since there is no hardware
+support for the watchpoint, GDB will software emulate the watchpoint
+making it run very slowly.
+
+The same will also be true for any guests started on a POWER9
+host. The watchpoint will fail and GDB will fall back to software
+emulation.
+
+If a guest is started on a POWER8 host, GDB will accept the watchpoint
+and configure the hardware to use the DAWR. This will run at full
+speed since it can use the hardware emulation. Unfortunately if this
+guest is migrated to a POWER9 host, the watchpoint will be lost on the
+POWER9. Loads and stores to the watchpoint locations will not be
+trapped in GDB. The watchpoint is remembered, so if the guest is
+migrated back to the POWER8 host, it will start working again.
+
+Force enabling the DAWR
+=======================
+Kernels (since ~v5.2) have an option to force enable the DAWR via::
+
+ echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous
+
+This enables the DAWR even on POWER9.
+
+This is a dangerous setting, USE AT YOUR OWN RISK.
+
+Some users may not care about a bad user crashing their box
+(ie. single user/desktop systems) and really want the DAWR. This
+allows them to force enable DAWR.
+
+This flag can also be used to disable DAWR access. Once this is
+cleared, all DAWR access should be cleared immediately and your
+machine once again safe from crashing.
+
+Userspace may get confused by toggling this. If DAWR is force
+enabled/disabled between getting the number of breakpoints (via
+PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
+inconsistent view of what's available. Similarly for guests.
+
+For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
+enabled in the host AND the guest. For this reason, this won't work on
+POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
+dawr_enable_dangerous file will fail if the hypervisor doesn't support
+writing the DAWR.
+
+To double check the DAWR is working, run this kernel selftest:
+
+ tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
+
+Any errors/failures/skips mean something is wrong.
diff --git a/Documentation/arch/powerpc/dexcr.rst b/Documentation/arch/powerpc/dexcr.rst
new file mode 100644
index 0000000000..615a631f51
--- /dev/null
+++ b/Documentation/arch/powerpc/dexcr.rst
@@ -0,0 +1,58 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+==========================================
+DEXCR (Dynamic Execution Control Register)
+==========================================
+
+Overview
+========
+
+The DEXCR is a privileged special purpose register (SPR) introduced in
+PowerPC ISA 3.1B (Power10) that allows per-cpu control over several dynamic
+execution behaviours. These behaviours include speculation (e.g., indirect
+branch target prediction) and enabling return-oriented programming (ROP)
+protection instructions.
+
+The execution control is exposed in hardware as up to 32 bits ('aspects') in
+the DEXCR. Each aspect controls a certain behaviour, and can be set or cleared
+to enable/disable the aspect. There are several variants of the DEXCR for
+different purposes:
+
+DEXCR
+ A privileged SPR that can control aspects for userspace and kernel space
+HDEXCR
+ A hypervisor-privileged SPR that can control aspects for the hypervisor and
+ enforce aspects for the kernel and userspace.
+UDEXCR
+ An optional ultravisor-privileged SPR that can control aspects for the ultravisor.
+
+Userspace can examine the current DEXCR state using a dedicated SPR that
+provides a non-privileged read-only view of the userspace DEXCR aspects.
+There is also an SPR that provides a read-only view of the hypervisor enforced
+aspects, which ORed with the userspace DEXCR view gives the effective DEXCR
+state for a process.
+
+
+Configuration
+=============
+
+The DEXCR is currently unconfigurable. All threads are run with the
+NPHIE aspect enabled.
+
+
+coredump and ptrace
+===================
+
+The userspace values of the DEXCR and HDEXCR (in this order) are exposed under
+``NT_PPC_DEXCR``. These are each 64 bits and readonly, and are intended to
+assist with core dumps. The DEXCR may be made writable in future. The top 32
+bits of both registers (corresponding to the non-userspace bits) are masked off.
+
+If the kernel config ``CONFIG_CHECKPOINT_RESTORE`` is enabled, then
+``NT_PPC_HASHKEYR`` is available and exposes the HASHKEYR value of the process
+for reading and writing. This is a tradeoff between increased security and
+checkpoint/restore support: a process should normally have no need to know its
+secret key, but restoring a process requires setting its original key. The key
+therefore appears in core dumps, and an attacker may be able to retrieve it from
+a coredump and effectively bypass ROP protection on any threads that share this
+key (potentially all threads from the same parent that have not run ``exec()``).
diff --git a/Documentation/arch/powerpc/dscr.rst b/Documentation/arch/powerpc/dscr.rst
new file mode 100644
index 0000000000..f735ec5375
--- /dev/null
+++ b/Documentation/arch/powerpc/dscr.rst
@@ -0,0 +1,87 @@
+===================================
+DSCR (Data Stream Control Register)
+===================================
+
+DSCR register in powerpc allows user to have some control of prefetch of data
+stream in the processor. Please refer to the ISA documents or related manual
+for more detailed information regarding how to use this DSCR to attain this
+control of the prefetches . This document here provides an overview of kernel
+support for DSCR, related kernel objects, its functionalities and exported
+user interface.
+
+(A) Data Structures:
+
+ (1) thread_struct::
+
+ dscr /* Thread DSCR value */
+ dscr_inherit /* Thread has changed default DSCR */
+
+ (2) PACA::
+
+ dscr_default /* per-CPU DSCR default value */
+
+ (3) sysfs.c::
+
+ dscr_default /* System DSCR default value */
+
+(B) Scheduler Changes:
+
+ Scheduler will write the per-CPU DSCR default which is stored in the
+ CPU's PACA value into the register if the thread has dscr_inherit value
+ cleared which means that it has not changed the default DSCR till now.
+ If the dscr_inherit value is set which means that it has changed the
+ default DSCR value, scheduler will write the changed value which will
+ now be contained in thread struct's dscr into the register instead of
+ the per-CPU default PACA based DSCR value.
+
+ NOTE: Please note here that the system wide global DSCR value never
+ gets used directly in the scheduler process context switch at all.
+
+(C) SYSFS Interface:
+
+ - Global DSCR default: /sys/devices/system/cpu/dscr_default
+ - CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
+
+ Changing the global DSCR default in the sysfs will change all the CPU
+ specific DSCR defaults immediately in their PACA structures. Again if
+ the current process has the dscr_inherit clear, it also writes the new
+ value into every CPU's DSCR register right away and updates the current
+ thread's DSCR value as well.
+
+ Changing the CPU specific DSCR default value in the sysfs does exactly
+ the same thing as above but unlike the global one above, it just changes
+ stuff for that particular CPU instead for all the CPUs on the system.
+
+(D) User Space Instructions:
+
+ The DSCR register can be accessed in the user space using any of these
+ two SPR numbers available for that purpose.
+
+ (1) Problem state SPR: 0x03 (Un-privileged, POWER8 only)
+ (2) Privileged state SPR: 0x11 (Privileged)
+
+ Accessing DSCR through privileged SPR number (0x11) from user space
+ works, as it is emulated following an illegal instruction exception
+ inside the kernel. Both mfspr and mtspr instructions are emulated.
+
+ Accessing DSCR through user level SPR (0x03) from user space will first
+ create a facility unavailable exception. Inside this exception handler
+ all mfspr instruction based read attempts will get emulated and returned
+ where as the first mtspr instruction based write attempts will enable
+ the DSCR facility for the next time around (both for read and write) by
+ setting DSCR facility in the FSCR register.
+
+(E) Specifics about 'dscr_inherit':
+
+ The thread struct element 'dscr_inherit' represents whether the thread
+ in question has attempted and changed the DSCR itself using any of the
+ following methods. This element signifies whether the thread wants to
+ use the CPU default DSCR value or its own changed DSCR value in the
+ kernel.
+
+ (1) mtspr instruction (SPR number 0x03)
+ (2) mtspr instruction (SPR number 0x11)
+ (3) ptrace interface (Explicitly set user DSCR value)
+
+ Any child of the process created after this event in the process inherits
+ this same behaviour as well.
diff --git a/Documentation/arch/powerpc/eeh-pci-error-recovery.rst b/Documentation/arch/powerpc/eeh-pci-error-recovery.rst
new file mode 100644
index 0000000000..d6643a91bd
--- /dev/null
+++ b/Documentation/arch/powerpc/eeh-pci-error-recovery.rst
@@ -0,0 +1,336 @@
+==========================
+PCI Bus EEH Error Recovery
+==========================
+
+Linas Vepstas <linas@austin.ibm.com>
+
+12 January 2005
+
+
+Overview:
+---------
+The IBM POWER-based pSeries and iSeries computers include PCI bus
+controller chips that have extended capabilities for detecting and
+reporting a large variety of PCI bus error conditions. These features
+go under the name of "EEH", for "Enhanced Error Handling". The EEH
+hardware features allow PCI bus errors to be cleared and a PCI
+card to be "rebooted", without also having to reboot the operating
+system.
+
+This is in contrast to traditional PCI error handling, where the
+PCI chip is wired directly to the CPU, and an error would cause
+a CPU machine-check/check-stop condition, halting the CPU entirely.
+Another "traditional" technique is to ignore such errors, which
+can lead to data corruption, both of user data or of kernel data,
+hung/unresponsive adapters, or system crashes/lockups. Thus,
+the idea behind EEH is that the operating system can become more
+reliable and robust by protecting it from PCI errors, and giving
+the OS the ability to "reboot"/recover individual PCI devices.
+
+Future systems from other vendors, based on the PCI-E specification,
+may contain similar features.
+
+
+Causes of EEH Errors
+--------------------
+EEH was originally designed to guard against hardware failure, such
+as PCI cards dying from heat, humidity, dust, vibration and bad
+electrical connections. The vast majority of EEH errors seen in
+"real life" are due to either poorly seated PCI cards, or,
+unfortunately quite commonly, due to device driver bugs, device firmware
+bugs, and sometimes PCI card hardware bugs.
+
+The most common software bug, is one that causes the device to
+attempt to DMA to a location in system memory that has not been
+reserved for DMA access for that card. This is a powerful feature,
+as it prevents what; otherwise, would have been silent memory
+corruption caused by the bad DMA. A number of device driver
+bugs have been found and fixed in this way over the past few
+years. Other possible causes of EEH errors include data or
+address line parity errors (for example, due to poor electrical
+connectivity due to a poorly seated card), and PCI-X split-completion
+errors (due to software, device firmware, or device PCI hardware bugs).
+The vast majority of "true hardware failures" can be cured by
+physically removing and re-seating the PCI card.
+
+
+Detection and Recovery
+----------------------
+In the following discussion, a generic overview of how to detect
+and recover from EEH errors will be presented. This is followed
+by an overview of how the current implementation in the Linux
+kernel does it. The actual implementation is subject to change,
+and some of the finer points are still being debated. These
+may in turn be swayed if or when other architectures implement
+similar functionality.
+
+When a PCI Host Bridge (PHB, the bus controller connecting the
+PCI bus to the system CPU electronics complex) detects a PCI error
+condition, it will "isolate" the affected PCI card. Isolation
+will block all writes (either to the card from the system, or
+from the card to the system), and it will cause all reads to
+return all-ff's (0xff, 0xffff, 0xffffffff for 8/16/32-bit reads).
+This value was chosen because it is the same value you would
+get if the device was physically unplugged from the slot.
+This includes access to PCI memory, I/O space, and PCI config
+space. Interrupts; however, will continue to be delivered.
+
+Detection and recovery are performed with the aid of ppc64
+firmware. The programming interfaces in the Linux kernel
+into the firmware are referred to as RTAS (Run-Time Abstraction
+Services). The Linux kernel does not (should not) access
+the EEH function in the PCI chipsets directly, primarily because
+there are a number of different chipsets out there, each with
+different interfaces and quirks. The firmware provides a
+uniform abstraction layer that will work with all pSeries
+and iSeries hardware (and be forwards-compatible).
+
+If the OS or device driver suspects that a PCI slot has been
+EEH-isolated, there is a firmware call it can make to determine if
+this is the case. If so, then the device driver should put itself
+into a consistent state (given that it won't be able to complete any
+pending work) and start recovery of the card. Recovery normally
+would consist of resetting the PCI device (holding the PCI #RST
+line high for two seconds), followed by setting up the device
+config space (the base address registers (BAR's), latency timer,
+cache line size, interrupt line, and so on). This is followed by a
+reinitialization of the device driver. In a worst-case scenario,
+the power to the card can be toggled, at least on hot-plug-capable
+slots. In principle, layers far above the device driver probably
+do not need to know that the PCI card has been "rebooted" in this
+way; ideally, there should be at most a pause in Ethernet/disk/USB
+I/O while the card is being reset.
+
+If the card cannot be recovered after three or four resets, the
+kernel/device driver should assume the worst-case scenario, that the
+card has died completely, and report this error to the sysadmin.
+In addition, error messages are reported through RTAS and also through
+syslogd (/var/log/messages) to alert the sysadmin of PCI resets.
+The correct way to deal with failed adapters is to use the standard
+PCI hotplug tools to remove and replace the dead card.
+
+
+Current PPC64 Linux EEH Implementation
+--------------------------------------
+At this time, a generic EEH recovery mechanism has been implemented,
+so that individual device drivers do not need to be modified to support
+EEH recovery. This generic mechanism piggy-backs on the PCI hotplug
+infrastructure, and percolates events up through the userspace/udev
+infrastructure. Following is a detailed description of how this is
+accomplished.
+
+EEH must be enabled in the PHB's very early during the boot process,
+and if a PCI slot is hot-plugged. The former is performed by
+eeh_init() in arch/powerpc/platforms/pseries/eeh.c, and the later by
+drivers/pci/hotplug/pSeries_pci.c calling in to the eeh.c code.
+EEH must be enabled before a PCI scan of the device can proceed.
+Current Power5 hardware will not work unless EEH is enabled;
+although older Power4 can run with it disabled. Effectively,
+EEH can no longer be turned off. PCI devices *must* be
+registered with the EEH code; the EEH code needs to know about
+the I/O address ranges of the PCI device in order to detect an
+error. Given an arbitrary address, the routine
+pci_get_device_by_addr() will find the pci device associated
+with that address (if any).
+
+The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(),
+etc. include a check to see if the i/o read returned all-0xff's.
+If so, these make a call to eeh_dn_check_failure(), which in turn
+asks the firmware if the all-ff's value is the sign of a true EEH
+error. If it is not, processing continues as normal. The grand
+total number of these false alarms or "false positives" can be
+seen in /proc/ppc64/eeh (subject to change). Normally, almost
+all of these occur during boot, when the PCI bus is scanned, where
+a large number of 0xff reads are part of the bus scan procedure.
+
+If a frozen slot is detected, code in
+arch/powerpc/platforms/pseries/eeh.c will print a stack trace to
+syslog (/var/log/messages). This stack trace has proven to be very
+useful to device-driver authors for finding out at what point the EEH
+error was detected, as the error itself usually occurs slightly
+beforehand.
+
+Next, it uses the Linux kernel notifier chain/work queue mechanism to
+allow any interested parties to find out about the failure. Device
+drivers, or other parts of the kernel, can use
+`eeh_register_notifier(struct notifier_block *)` to find out about EEH
+events. The event will include a pointer to the pci device, the
+device node and some state info. Receivers of the event can "do as
+they wish"; the default handler will be described further in this
+section.
+
+To assist in the recovery of the device, eeh.c exports the
+following functions:
+
+rtas_set_slot_reset()
+ assert the PCI #RST line for 1/8th of a second
+rtas_configure_bridge()
+ ask firmware to configure any PCI bridges
+ located topologically under the pci slot.
+eeh_save_bars() and eeh_restore_bars():
+ save and restore the PCI
+ config-space info for a device and any devices under it.
+
+
+A handler for the EEH notifier_block events is implemented in
+drivers/pci/hotplug/pSeries_pci.c, called handle_eeh_events().
+It saves the device BAR's and then calls rpaphp_unconfig_pci_adapter().
+This last call causes the device driver for the card to be stopped,
+which causes uevents to go out to user space. This triggers
+user-space scripts that might issue commands such as "ifdown eth0"
+for ethernet cards, and so on. This handler then sleeps for 5 seconds,
+hoping to give the user-space scripts enough time to complete.
+It then resets the PCI card, reconfigures the device BAR's, and
+any bridges underneath. It then calls rpaphp_enable_pci_slot(),
+which restarts the device driver and triggers more user-space
+events (for example, calling "ifup eth0" for ethernet cards).
+
+
+Device Shutdown and User-Space Events
+-------------------------------------
+This section documents what happens when a pci slot is unconfigured,
+focusing on how the device driver gets shut down, and on how the
+events get delivered to user-space scripts.
+
+Following is an example sequence of events that cause a device driver
+close function to be called during the first phase of an EEH reset.
+The following sequence is an example of the pcnet32 device driver::
+
+ rpa_php_unconfig_pci_adapter (struct slot *) // in rpaphp_pci.c
+ {
+ calls
+ pci_remove_bus_device (struct pci_dev *) // in /drivers/pci/remove.c
+ {
+ calls
+ pci_destroy_dev (struct pci_dev *)
+ {
+ calls
+ device_unregister (&dev->dev) // in /drivers/base/core.c
+ {
+ calls
+ device_del (struct device *)
+ {
+ calls
+ bus_remove_device() // in /drivers/base/bus.c
+ {
+ calls
+ device_release_driver()
+ {
+ calls
+ struct device_driver->remove() which is just
+ pci_device_remove() // in /drivers/pci/pci_driver.c
+ {
+ calls
+ struct pci_driver->remove() which is just
+ pcnet32_remove_one() // in /drivers/net/pcnet32.c
+ {
+ calls
+ unregister_netdev() // in /net/core/dev.c
+ {
+ calls
+ dev_close() // in /net/core/dev.c
+ {
+ calls dev->stop();
+ which is just pcnet32_close() // in pcnet32.c
+ {
+ which does what you wanted
+ to stop the device
+ }
+ }
+ }
+ which
+ frees pcnet32 device driver memory
+ }
+ }}}}}}
+
+
+in drivers/pci/pci_driver.c,
+struct device_driver->remove() is just pci_device_remove()
+which calls struct pci_driver->remove() which is pcnet32_remove_one()
+which calls unregister_netdev() (in net/core/dev.c)
+which calls dev_close() (in net/core/dev.c)
+which calls dev->stop() which is pcnet32_close()
+which then does the appropriate shutdown.
+
+---
+
+Following is the analogous stack trace for events sent to user-space
+when the pci device is unconfigured::
+
+ rpa_php_unconfig_pci_adapter() { // in rpaphp_pci.c
+ calls
+ pci_remove_bus_device (struct pci_dev *) { // in /drivers/pci/remove.c
+ calls
+ pci_destroy_dev (struct pci_dev *) {
+ calls
+ device_unregister (&dev->dev) { // in /drivers/base/core.c
+ calls
+ device_del(struct device * dev) { // in /drivers/base/core.c
+ calls
+ kobject_del() { //in /libs/kobject.c
+ calls
+ kobject_uevent() { // in /libs/kobject.c
+ calls
+ kset_uevent() { // in /lib/kobject.c
+ calls
+ kset->uevent_ops->uevent() // which is really just
+ a call to
+ dev_uevent() { // in /drivers/base/core.c
+ calls
+ dev->bus->uevent() which is really just a call to
+ pci_uevent () { // in drivers/pci/hotplug.c
+ which prints device name, etc....
+ }
+ }
+ then kobject_uevent() sends a netlink uevent to userspace
+ --> userspace uevent
+ (during early boot, nobody listens to netlink events and
+ kobject_uevent() executes uevent_helper[], which runs the
+ event process /sbin/hotplug)
+ }
+ }
+ kobject_del() then calls sysfs_remove_dir(), which would
+ trigger any user-space daemon that was watching /sysfs,
+ and notice the delete event.
+
+
+Pro's and Con's of the Current Design
+-------------------------------------
+There are several issues with the current EEH software recovery design,
+which may be addressed in future revisions. But first, note that the
+big plus of the current design is that no changes need to be made to
+individual device drivers, so that the current design throws a wide net.
+The biggest negative of the design is that it potentially disturbs
+network daemons and file systems that didn't need to be disturbed.
+
+- A minor complaint is that resetting the network card causes
+ user-space back-to-back ifdown/ifup burps that potentially disturb
+ network daemons, that didn't need to even know that the pci
+ card was being rebooted.
+
+- A more serious concern is that the same reset, for SCSI devices,
+ causes havoc to mounted file systems. Scripts cannot post-facto
+ unmount a file system without flushing pending buffers, but this
+ is impossible, because I/O has already been stopped. Thus,
+ ideally, the reset should happen at or below the block layer,
+ so that the file systems are not disturbed.
+
+ Reiserfs does not tolerate errors returned from the block device.
+ Ext3fs seems to be tolerant, retrying reads/writes until it does
+ succeed. Both have been only lightly tested in this scenario.
+
+ The SCSI-generic subsystem already has built-in code for performing
+ SCSI device resets, SCSI bus resets, and SCSI host-bus-adapter
+ (HBA) resets. These are cascaded into a chain of attempted
+ resets if a SCSI command fails. These are completely hidden
+ from the block layer. It would be very natural to add an EEH
+ reset into this chain of events.
+
+- If a SCSI error occurs for the root device, all is lost unless
+ the sysadmin had the foresight to run /bin, /sbin, /etc, /var
+ and so on, out of ramdisk/tmpfs.
+
+
+Conclusions
+-----------
+There's forward progress ...
diff --git a/Documentation/arch/powerpc/elf_hwcaps.rst b/Documentation/arch/powerpc/elf_hwcaps.rst
new file mode 100644
index 0000000000..4c896cf077
--- /dev/null
+++ b/Documentation/arch/powerpc/elf_hwcaps.rst
@@ -0,0 +1,231 @@
+.. _elf_hwcaps_powerpc:
+
+==================
+POWERPC ELF HWCAPs
+==================
+
+This document describes the usage and semantics of the powerpc ELF HWCAPs.
+
+
+1. Introduction
+---------------
+
+Some hardware or software features are only available on some CPU
+implementations, and/or with certain kernel configurations, but have no other
+discovery mechanism available to userspace code. The kernel exposes the
+presence of these features to userspace through a set of flags called HWCAPs,
+exposed in the auxiliary vector.
+
+Userspace software can test for features by acquiring the AT_HWCAP or
+AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
+flags are set, e.g.::
+
+ bool floating_point_is_present(void)
+ {
+ unsigned long HWCAPs = getauxval(AT_HWCAP);
+ if (HWCAPs & PPC_FEATURE_HAS_FPU)
+ return true;
+
+ return false;
+ }
+
+Where software relies on a feature described by a HWCAP, it should check the
+relevant HWCAP flag to verify that the feature is present before attempting to
+make use of the feature.
+
+HWCAP is the preferred method to test for the presence of a feature rather
+than probing through other means, which may not be reliable or may cause
+unpredictable behaviour.
+
+Software that targets a particular platform does not necessarily have to
+test for required or implied features. For example if the program requires
+FPU, VMX, VSX, it is not necessary to test those HWCAPs, and it may be
+impossible to do so if the compiler generates code requiring those features.
+
+2. Facilities
+-------------
+
+The Power ISA uses the term "facility" to describe a class of instructions,
+registers, interrupts, etc. The presence or absence of a facility indicates
+whether this class is available to be used, but the specifics depend on the
+ISA version. For example, if the VSX facility is available, the VSX
+instructions that can be used differ between the v3.0B and v3.1B ISA
+versions.
+
+3. Categories
+-------------
+
+The Power ISA before v3.0 uses the term "category" to describe certain
+classes of instructions and operating modes which may be optional or
+mutually exclusive, the exact meaning of the HWCAP flag may depend on
+context, e.g., the presence of the BOOKE feature implies that the server
+category is not implemented.
+
+4. HWCAP allocation
+-------------------
+
+HWCAPs are allocated as described in Power Architecture 64-Bit ELF V2 ABI
+Specification (which will be reflected in the kernel's uapi headers).
+
+5. The HWCAPs exposed in AT_HWCAP
+---------------------------------
+
+PPC_FEATURE_32
+ 32-bit CPU
+
+PPC_FEATURE_64
+ 64-bit CPU (userspace may be running in 32-bit mode).
+
+PPC_FEATURE_601_INSTR
+ The processor is PowerPC 601.
+ Unused in the kernel since f0ed73f3fa2c ("powerpc: Remove PowerPC 601")
+
+PPC_FEATURE_HAS_ALTIVEC
+ Vector (aka Altivec, VMX) facility is available.
+
+PPC_FEATURE_HAS_FPU
+ Floating point facility is available.
+
+PPC_FEATURE_HAS_MMU
+ Memory management unit is present and enabled.
+
+PPC_FEATURE_HAS_4xxMAC
+ The processor is 40x or 44x family.
+
+PPC_FEATURE_UNIFIED_CACHE
+ The processor has a unified L1 cache for instructions and data, as
+ found in NXP e200.
+ Unused in the kernel since 39c8bf2b3cc1 ("powerpc: Retire e200 core (mpc555x processor)")
+
+PPC_FEATURE_HAS_SPE
+ Signal Processing Engine facility is available.
+
+PPC_FEATURE_HAS_EFP_SINGLE
+ Embedded Floating Point single precision operations are available.
+
+PPC_FEATURE_HAS_EFP_DOUBLE
+ Embedded Floating Point double precision operations are available.
+
+PPC_FEATURE_NO_TB
+ The timebase facility (mftb instruction) is not available.
+ This is a 601 specific HWCAP, so if it is known that the processor
+ running is not a 601, via other HWCAPs or other means, it is not
+ required to test this bit before using the timebase.
+ Unused in the kernel since f0ed73f3fa2c ("powerpc: Remove PowerPC 601")
+
+PPC_FEATURE_POWER4
+ The processor is POWER4 or PPC970/FX/MP.
+ POWER4 support dropped from the kernel since 471d7ff8b51b ("powerpc/64s: Remove POWER4 support")
+
+PPC_FEATURE_POWER5
+ The processor is POWER5.
+
+PPC_FEATURE_POWER5_PLUS
+ The processor is POWER5+.
+
+PPC_FEATURE_CELL
+ The processor is Cell.
+
+PPC_FEATURE_BOOKE
+ The processor implements the embedded category ("BookE") architecture.
+
+PPC_FEATURE_SMT
+ The processor implements SMT.
+
+PPC_FEATURE_ICACHE_SNOOP
+ The processor icache is coherent with the dcache, and instruction storage
+ can be made consistent with data storage for the purpose of executing
+ instructions with the sequence (as described in, e.g., POWER9 Processor
+ User's Manual, 4.6.2.2 Instruction Cache Block Invalidate (icbi))::
+
+ sync
+ icbi (to any address)
+ isync
+
+PPC_FEATURE_ARCH_2_05
+ The processor supports the v2.05 userlevel architecture. Processors
+ supporting later architectures DO NOT set this feature.
+
+PPC_FEATURE_PA6T
+ The processor is PA6T.
+
+PPC_FEATURE_HAS_DFP
+ DFP facility is available.
+
+PPC_FEATURE_POWER6_EXT
+ The processor is POWER6.
+
+PPC_FEATURE_ARCH_2_06
+ The processor supports the v2.06 userlevel architecture. Processors
+ supporting later architectures also set this feature.
+
+PPC_FEATURE_HAS_VSX
+ VSX facility is available.
+
+PPC_FEATURE_PSERIES_PERFMON_COMPAT
+ The processor supports architected PMU events in the range 0xE0-0xFF.
+
+PPC_FEATURE_TRUE_LE
+ The processor supports true little-endian mode.
+
+PPC_FEATURE_PPC_LE
+ The processor supports "PowerPC Little-Endian", that uses address
+ munging to make storage access appear to be little-endian, but the
+ data is stored in a different format that is unsuitable to be
+ accessed by other agents not running in this mode.
+
+6. The HWCAPs exposed in AT_HWCAP2
+----------------------------------
+
+PPC_FEATURE2_ARCH_2_07
+ The processor supports the v2.07 userlevel architecture. Processors
+ supporting later architectures also set this feature.
+
+PPC_FEATURE2_HTM
+ Transactional Memory feature is available.
+
+PPC_FEATURE2_DSCR
+ DSCR facility is available.
+
+PPC_FEATURE2_EBB
+ EBB facility is available.
+
+PPC_FEATURE2_ISEL
+ isel instruction is available. This is superseded by ARCH_2_07 and
+ later.
+
+PPC_FEATURE2_TAR
+ TAR facility is available.
+
+PPC_FEATURE2_VEC_CRYPTO
+ v2.07 crypto instructions are available.
+
+PPC_FEATURE2_HTM_NOSC
+ System calls fail if called in a transactional state, see
+ Documentation/arch/powerpc/syscall64-abi.rst
+
+PPC_FEATURE2_ARCH_3_00
+ The processor supports the v3.0B / v3.0C userlevel architecture. Processors
+ supporting later architectures also set this feature.
+
+PPC_FEATURE2_HAS_IEEE128
+ IEEE 128-bit binary floating point is supported with VSX
+ quad-precision instructions and data types.
+
+PPC_FEATURE2_DARN
+ darn instruction is available.
+
+PPC_FEATURE2_SCV
+ The scv 0 instruction may be used for system calls, see
+ Documentation/arch/powerpc/syscall64-abi.rst.
+
+PPC_FEATURE2_HTM_NO_SUSPEND
+ A limited Transactional Memory facility that does not support suspend is
+ available, see Documentation/arch/powerpc/transactional_memory.rst.
+
+PPC_FEATURE2_ARCH_3_1
+ The processor supports the v3.1 userlevel architecture. Processors
+ supporting later architectures also set this feature.
+
+PPC_FEATURE2_MMA
+ MMA facility is available.
diff --git a/Documentation/arch/powerpc/elfnote.rst b/Documentation/arch/powerpc/elfnote.rst
new file mode 100644
index 0000000000..3ec8d61e9a
--- /dev/null
+++ b/Documentation/arch/powerpc/elfnote.rst
@@ -0,0 +1,41 @@
+==========================
+ELF Note PowerPC Namespace
+==========================
+
+The PowerPC namespace in an ELF Note of the kernel binary is used to store
+capabilities and information which can be used by a bootloader or userland.
+
+Types and Descriptors
+---------------------
+
+The types to be used with the "PowerPC" namespace are defined in [#f1]_.
+
+ 1) PPC_ELFNOTE_CAPABILITIES
+
+Define the capabilities supported/required by the kernel. This type uses a
+bitmap as "descriptor" field. Each bit is described below:
+
+- Ultravisor-capable bit (PowerNV only).
+
+.. code-block:: c
+
+ #define PPCCAP_ULTRAVISOR_BIT (1 << 0)
+
+Indicate that the powerpc kernel binary knows how to run in an
+ultravisor-enabled system.
+
+In an ultravisor-enabled system, some machine resources are now controlled
+by the ultravisor. If the kernel is not ultravisor-capable, but it ends up
+being run on a machine with ultravisor, the kernel will probably crash
+trying to access ultravisor resources. For instance, it may crash in early
+boot trying to set the partition table entry 0.
+
+In an ultravisor-enabled system, a bootloader could warn the user or prevent
+the kernel from being run if the PowerPC ultravisor capability doesn't exist
+or the Ultravisor-capable bit is not set.
+
+References
+----------
+
+.. [#f1] arch/powerpc/include/asm/elfnote.h
+
diff --git a/Documentation/arch/powerpc/features.rst b/Documentation/arch/powerpc/features.rst
new file mode 100644
index 0000000000..ee4b95e042
--- /dev/null
+++ b/Documentation/arch/powerpc/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: features powerpc
diff --git a/Documentation/arch/powerpc/firmware-assisted-dump.rst b/Documentation/arch/powerpc/firmware-assisted-dump.rst
new file mode 100644
index 0000000000..e363fc4852
--- /dev/null
+++ b/Documentation/arch/powerpc/firmware-assisted-dump.rst
@@ -0,0 +1,381 @@
+======================
+Firmware-Assisted Dump
+======================
+
+July 2011
+
+The goal of firmware-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+- Firmware-Assisted Dump (FADump) infrastructure is intended to replace
+ the existing phyp assisted dump.
+- Fadump uses the same firmware interfaces and memory reservation model
+ as phyp assisted dump.
+- Unlike phyp dump, FADump exports the memory dump through /proc/vmcore
+ in the ELF format in the same way as kdump. This helps us reuse the
+ kdump infrastructure for dump capture and filtering.
+- Unlike phyp dump, userspace tool does not need to refer any sysfs
+ interface while reading /proc/vmcore.
+- Unlike phyp dump, FADump allows user to release all the memory reserved
+ for dump, with a single operation of echo 1 > /sys/kernel/fadump_release_mem.
+- Once enabled through kernel boot parameter, FADump can be
+ started/stopped through /sys/kernel/fadump_registered interface (see
+ sysfs files section below) and can be easily integrated with kdump
+ service start/stop init scripts.
+
+Comparing with kdump or other strategies, firmware-assisted
+dump offers several strong, practical advantages:
+
+- Unlike kdump, the system has been reset, and loaded
+ with a fresh copy of the kernel. In particular,
+ PCI and I/O devices have been reinitialized and are
+ in a clean, consistent state.
+- Once the dump is copied out, the memory that held the dump
+ is immediately available to the running kernel. And therefore,
+ unlike kdump, FADump doesn't need a 2nd reboot to get back
+ the system to the production configuration.
+
+The above can only be accomplished by coordination with,
+and assistance from the Power firmware. The procedure is
+as follows:
+
+- The first kernel registers the sections of memory with the
+ Power firmware for dump preservation during OS initialization.
+ These registered sections of memory are reserved by the first
+ kernel during early boot.
+
+- When system crashes, the Power firmware will copy the registered
+ low memory regions (boot memory) from source to destination area.
+ It will also save hardware PTE's.
+
+ NOTE:
+ The term 'boot memory' means size of the low memory chunk
+ that is required for a kernel to boot successfully when
+ booted with restricted memory. By default, the boot memory
+ size will be the larger of 5% of system RAM or 256MB.
+ Alternatively, user can also specify boot memory size
+ through boot parameter 'crashkernel=' which will override
+ the default calculated size. Use this option if default
+ boot memory size is not sufficient for second kernel to
+ boot successfully. For syntax of crashkernel= parameter,
+ refer to Documentation/admin-guide/kdump/kdump.rst. If any
+ offset is provided in crashkernel= parameter, it will be
+ ignored as FADump uses a predefined offset to reserve memory
+ for boot memory dump preservation in case of a crash.
+
+- After the low memory (boot memory) area has been saved, the
+ firmware will reset PCI and other hardware state. It will
+ *not* clear the RAM. It will then launch the bootloader, as
+ normal.
+
+- The freshly booted kernel will notice that there is a new node
+ (rtas/ibm,kernel-dump on pSeries or ibm,opal/dump/mpipl-boot
+ on OPAL platform) in the device tree, indicating that
+ there is crash data available from a previous boot. During
+ the early boot OS will reserve rest of the memory above
+ boot memory size effectively booting with restricted memory
+ size. This will make sure that this kernel (also, referred
+ to as second kernel or capture kernel) will not touch any
+ of the dump memory area.
+
+- User-space tools will read /proc/vmcore to obtain the contents
+ of memory, which holds the previous crashed kernel dump in ELF
+ format. The userspace tools may copy this info to disk, or
+ network, nas, san, iscsi, etc. as desired.
+
+- Once the userspace tool is done saving dump, it will echo
+ '1' to /sys/kernel/fadump_release_mem to release the reserved
+ memory back to general use, except the memory required for
+ next firmware-assisted dump registration.
+
+ e.g.::
+
+ # echo 1 > /sys/kernel/fadump_release_mem
+
+Please note that the firmware-assisted dump feature
+is only available on POWER6 and above systems on pSeries
+(PowerVM) platform and POWER9 and above systems with OP940
+or later firmware versions on PowerNV (OPAL) platform.
+Note that, OPAL firmware exports ibm,opal/dump node when
+FADump is supported on PowerNV platform.
+
+On OPAL based machines, system first boots into an intermittent
+kernel (referred to as petitboot kernel) before booting into the
+capture kernel. This kernel would have minimal kernel and/or
+userspace support to process crash data. Such kernel needs to
+preserve previously crash'ed kernel's memory for the subsequent
+capture kernel boot to process this crash data. Kernel config
+option CONFIG_PRESERVE_FA_DUMP has to be enabled on such kernel
+to ensure that crash data is preserved to process later.
+
+-- On OPAL based machines (PowerNV), if the kernel is build with
+ CONFIG_OPAL_CORE=y, OPAL memory at the time of crash is also
+ exported as /sys/firmware/opal/mpipl/core file. This procfs file is
+ helpful in debugging OPAL crashes with GDB. The kernel memory
+ used for exporting this procfs file can be released by echo'ing
+ '1' to /sys/firmware/opal/mpipl/release_core node.
+
+ e.g.
+ # echo 1 > /sys/firmware/opal/mpipl/release_core
+
+Implementation details:
+-----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on that particular machine. If it does, then
+we check to see if an active dump is waiting for us. If yes
+then everything but boot memory size of RAM is reserved during
+early boot (See Fig. 2). This area is released once we finish
+collecting the dump from user land scripts (e.g. kdump scripts)
+that are run. If there is dump data, then the
+/sys/kernel/fadump_release_mem file is created, and the reserved
+memory is held.
+
+If there is no waiting dump data, then only the memory required to
+hold CPU state, HPTE region, boot memory dump, FADump header and
+elfcore header, is usually reserved at an offset greater than boot
+memory size (see Fig. 1). This area is *not* released: this region
+will be kept permanently reserved, so that it can act as a receptacle
+for a copy of the boot memory content in addition to CPU state and
+HPTE region, in the case a crash does occur.
+
+Since this reserved memory area is used only after the system crash,
+there is no point in blocking this significant chunk of memory from
+production kernel. Hence, the implementation uses the Linux kernel's
+Contiguous Memory Allocator (CMA) for memory reservation if CMA is
+configured for kernel. With CMA reservation this memory will be
+available for applications to use it, while kernel is prevented from
+using it. With this FADump will still be able to capture all of the
+kernel memory and most of the user space memory except the user pages
+that were present in CMA region::
+
+ o Memory Reservation during first kernel
+
+ Low memory Top of memory
+ 0 boot memory size |<--- Reserved dump area --->| |
+ | | | Permanent Reservation | |
+ V V | | V
+ +-----------+-----/ /---+---+----+-------+-----+-----+----+--+
+ | | |///|////| DUMP | HDR | ELF |////| |
+ +-----------+-----/ /---+---+----+-------+-----+-----+----+--+
+ | ^ ^ ^ ^ ^
+ | | | | | |
+ \ CPU HPTE / | |
+ ------------------------------ | |
+ Boot memory content gets transferred | |
+ to reserved area by firmware at the | |
+ time of crash. | |
+ FADump Header |
+ (meta area) |
+ |
+ |
+ Metadata: This area holds a metadata structure whose
+ address is registered with f/w and retrieved in the
+ second kernel after crash, on platforms that support
+ tags (OPAL). Having such structure with info needed
+ to process the crashdump eases dump capture process.
+
+ Fig. 1
+
+
+ o Memory Reservation during second kernel after crash
+
+ Low memory Top of memory
+ 0 boot memory size |
+ | |<------------ Crash preserved area ------------>|
+ V V |<--- Reserved dump area --->| |
+ +-----------+-----/ /---+---+----+-------+-----+-----+----+--+
+ | | |///|////| DUMP | HDR | ELF |////| |
+ +-----------+-----/ /---+---+----+-------+-----+-----+----+--+
+ | |
+ V V
+ Used by second /proc/vmcore
+ kernel to boot
+
+ +---+
+ |///| -> Regions (CPU, HPTE & Metadata) marked like this in the above
+ +---+ figures are not always present. For example, OPAL platform
+ does not have CPU & HPTE regions while Metadata region is
+ not supported on pSeries currently.
+
+ Fig. 2
+
+
+Currently the dump will be copied from /proc/vmcore to a new file upon
+user intervention. The dump data available through /proc/vmcore will be
+in ELF format. Hence the existing kdump infrastructure (kdump scripts)
+to save the dump works fine with minor modifications. KDump scripts on
+major Distro releases have already been modified to work seamlessly (no
+user intervention in saving the dump) when FADump is used, instead of
+KDump, as dump mechanism.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+How to enable firmware-assisted dump (FADump):
+----------------------------------------------
+
+1. Set config option CONFIG_FA_DUMP=y and build kernel.
+2. Boot into linux kernel with 'fadump=on' kernel cmdline option.
+ By default, FADump reserved memory will be initialized as CMA area.
+ Alternatively, user can boot linux kernel with 'fadump=nocma' to
+ prevent FADump to use CMA.
+3. Optionally, user can also set 'crashkernel=' kernel cmdline
+ to specify size of the memory to reserve for boot memory dump
+ preservation.
+
+NOTE:
+ 1. 'fadump_reserve_mem=' parameter has been deprecated. Instead
+ use 'crashkernel=' to specify size of the memory to reserve
+ for boot memory dump preservation.
+ 2. If firmware-assisted dump fails to reserve memory then it
+ will fallback to existing kdump mechanism if 'crashkernel='
+ option is set at kernel cmdline.
+ 3. if user wants to capture all of user space memory and ok with
+ reserved memory not available to production system, then
+ 'fadump=nocma' kernel parameter can be used to fallback to
+ old behaviour.
+
+Sysfs/debugfs files:
+--------------------
+
+Firmware-assisted dump feature uses sysfs file system to hold
+the control files and debugfs file to display memory reserved region.
+
+Here is the list of files under kernel sysfs:
+
+ /sys/kernel/fadump_enabled
+ This is used to display the FADump status.
+
+ - 0 = FADump is disabled
+ - 1 = FADump is enabled
+
+ This interface can be used by kdump init scripts to identify if
+ FADump is enabled in the kernel and act accordingly.
+
+ /sys/kernel/fadump_registered
+ This is used to display the FADump registration status as well
+ as to control (start/stop) the FADump registration.
+
+ - 0 = FADump is not registered.
+ - 1 = FADump is registered and ready to handle system crash.
+
+ To register FADump echo 1 > /sys/kernel/fadump_registered and
+ echo 0 > /sys/kernel/fadump_registered for un-register and stop the
+ FADump. Once the FADump is un-registered, the system crash will not
+ be handled and vmcore will not be captured. This interface can be
+ easily integrated with kdump service start/stop.
+
+ /sys/kernel/fadump/mem_reserved
+
+ This is used to display the memory reserved by FADump for saving the
+ crash dump.
+
+ /sys/kernel/fadump_release_mem
+ This file is available only when FADump is active during
+ second kernel. This is used to release the reserved memory
+ region that are held for saving crash dump. To release the
+ reserved memory echo 1 to it::
+
+ echo 1 > /sys/kernel/fadump_release_mem
+
+ After echo 1, the content of the /sys/kernel/debug/powerpc/fadump_region
+ file will change to reflect the new memory reservations.
+
+ The existing userspace tools (kdump infrastructure) can be easily
+ enhanced to use this interface to release the memory reserved for
+ dump and continue without 2nd reboot.
+
+Note: /sys/kernel/fadump_release_opalcore sysfs has moved to
+ /sys/firmware/opal/mpipl/release_core
+
+ /sys/firmware/opal/mpipl/release_core
+
+ This file is available only on OPAL based machines when FADump is
+ active during capture kernel. This is used to release the memory
+ used by the kernel to export /sys/firmware/opal/mpipl/core file. To
+ release this memory, echo '1' to it:
+
+ echo 1 > /sys/firmware/opal/mpipl/release_core
+
+Note: The following FADump sysfs files are deprecated.
+
++----------------------------------+--------------------------------+
+| Deprecated | Alternative |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_enabled | /sys/kernel/fadump/enabled |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_registered | /sys/kernel/fadump/registered |
++----------------------------------+--------------------------------+
+| /sys/kernel/fadump_release_mem | /sys/kernel/fadump/release_mem |
++----------------------------------+--------------------------------+
+
+Here is the list of files under powerpc debugfs:
+(Assuming debugfs is mounted on /sys/kernel/debug directory.)
+
+ /sys/kernel/debug/powerpc/fadump_region
+ This file shows the reserved memory regions if FADump is
+ enabled otherwise this file is empty. The output format
+ is::
+
+ <region>: [<start>-<end>] <reserved-size> bytes, Dumped: <dump-size>
+
+ and for kernel DUMP region is:
+
+ DUMP: Src: <src-addr>, Dest: <dest-addr>, Size: <size>, Dumped: # bytes
+
+ e.g.
+ Contents when FADump is registered during first kernel::
+
+ # cat /sys/kernel/debug/powerpc/fadump_region
+ CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x0
+ HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x0
+ DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x0
+
+ Contents when FADump is active during second kernel::
+
+ # cat /sys/kernel/debug/powerpc/fadump_region
+ CPU : [0x0000006ffb0000-0x0000006fff001f] 0x40020 bytes, Dumped: 0x40020
+ HPTE: [0x0000006fff0020-0x0000006fff101f] 0x1000 bytes, Dumped: 0x1000
+ DUMP: [0x0000006fff1020-0x0000007fff101f] 0x10000000 bytes, Dumped: 0x10000000
+ : [0x00000010000000-0x0000006ffaffff] 0x5ffb0000 bytes, Dumped: 0x5ffb0000
+
+
+NOTE:
+ Please refer to Documentation/filesystems/debugfs.rst on
+ how to mount the debugfs filesystem.
+
+
+TODO:
+-----
+ - Need to come up with the better approach to find out more
+ accurate boot memory size that is required for a kernel to
+ boot successfully when booted with restricted memory.
+ - The FADump implementation introduces a FADump crash info structure
+ in the scratch area before the ELF core header. The idea of introducing
+ this structure is to pass some important crash info data to the second
+ kernel which will help second kernel to populate ELF core header with
+ correct data before it gets exported through /proc/vmcore. The current
+ design implementation does not address a possibility of introducing
+ additional fields (in future) to this structure without affecting
+ compatibility. Need to come up with the better approach to address this.
+
+ The possible approaches are:
+
+ 1. Introduce version field for version tracking, bump up the version
+ whenever a new field is added to the structure in future. The version
+ field can be used to find out what fields are valid for the current
+ version of the structure.
+ 2. Reserve the area of predefined size (say PAGE_SIZE) for this
+ structure and have unused area as reserved (initialized to zero)
+ for future field additions.
+
+ The advantage of approach 1 over 2 is we don't need to reserve extra space.
+
+Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
+
+This document is based on the original documentation written for phyp
+
+assisted dump by Linas Vepstas and Manish Ahuja.
diff --git a/Documentation/arch/powerpc/hvcs.rst b/Documentation/arch/powerpc/hvcs.rst
new file mode 100644
index 0000000000..6808acde67
--- /dev/null
+++ b/Documentation/arch/powerpc/hvcs.rst
@@ -0,0 +1,581 @@
+===============================================================
+HVCS IBM "Hypervisor Virtual Console Server" Installation Guide
+===============================================================
+
+for Linux Kernel 2.6.4+
+
+Copyright (C) 2004 IBM Corporation
+
+.. ===========================================================================
+.. NOTE:Eight space tabs are the optimum editor setting for reading this file.
+.. ===========================================================================
+
+
+Author(s): Ryan S. Arnold <rsa@us.ibm.com>
+
+Date Created: March, 02, 2004
+Last Changed: August, 24, 2004
+
+.. Table of contents:
+
+ 1. Driver Introduction:
+ 2. System Requirements
+ 3. Build Options:
+ 3.1 Built-in:
+ 3.2 Module:
+ 4. Installation:
+ 5. Connection:
+ 6. Disconnection:
+ 7. Configuration:
+ 8. Questions & Answers:
+ 9. Reporting Bugs:
+
+1. Driver Introduction:
+=======================
+
+This is the device driver for the IBM Hypervisor Virtual Console Server,
+"hvcs". The IBM hvcs provides a tty driver interface to allow Linux user
+space applications access to the system consoles of logically partitioned
+operating systems (Linux and AIX) running on the same partitioned Power5
+ppc64 system. Physical hardware consoles per partition are not practical
+on this hardware so system consoles are accessed by this driver using
+firmware interfaces to virtual terminal devices.
+
+2. System Requirements:
+=======================
+
+This device driver was written using 2.6.4 Linux kernel APIs and will only
+build and run on kernels of this version or later.
+
+This driver was written to operate solely on IBM Power5 ppc64 hardware
+though some care was taken to abstract the architecture dependent firmware
+calls from the driver code.
+
+Sysfs must be mounted on the system so that the user can determine which
+major and minor numbers are associated with each vty-server. Directions
+for sysfs mounting are outside the scope of this document.
+
+3. Build Options:
+=================
+
+The hvcs driver registers itself as a tty driver. The tty layer
+dynamically allocates a block of major and minor numbers in a quantity
+requested by the registering driver. The hvcs driver asks the tty layer
+for 64 of these major/minor numbers by default to use for hvcs device node
+entries.
+
+If the default number of device entries is adequate then this driver can be
+built into the kernel. If not, the default can be over-ridden by inserting
+the driver as a module with insmod parameters.
+
+3.1 Built-in:
+-------------
+
+The following menuconfig example demonstrates selecting to build this
+driver into the kernel::
+
+ Device Drivers --->
+ Character devices --->
+ <*> IBM Hypervisor Virtual Console Server Support
+
+Begin the kernel make process.
+
+3.2 Module:
+-----------
+
+The following menuconfig example demonstrates selecting to build this
+driver as a kernel module::
+
+ Device Drivers --->
+ Character devices --->
+ <M> IBM Hypervisor Virtual Console Server Support
+
+The make process will build the following kernel modules:
+
+ - hvcs.ko
+ - hvcserver.ko
+
+To insert the module with the default allocation execute the following
+commands in the order they appear::
+
+ insmod hvcserver.ko
+ insmod hvcs.ko
+
+The hvcserver module contains architecture specific firmware calls and must
+be inserted first, otherwise the hvcs module will not find some of the
+symbols it expects.
+
+To override the default use an insmod parameter as follows (requesting 4
+tty devices as an example)::
+
+ insmod hvcs.ko hvcs_parm_num_devs=4
+
+There is a maximum number of dev entries that can be specified on insmod.
+We think that 1024 is currently a decent maximum number of server adapters
+to allow. This can always be changed by modifying the constant in the
+source file before building.
+
+NOTE: The length of time it takes to insmod the driver seems to be related
+to the number of tty interfaces the registering driver requests.
+
+In order to remove the driver module execute the following command::
+
+ rmmod hvcs.ko
+
+The recommended method for installing hvcs as a module is to use depmod to
+build a current modules.dep file in /lib/modules/`uname -r` and then
+execute::
+
+ modprobe hvcs hvcs_parm_num_devs=4
+
+The modules.dep file indicates that hvcserver.ko needs to be inserted
+before hvcs.ko and modprobe uses this file to smartly insert the modules in
+the proper order.
+
+The following modprobe command is used to remove hvcs and hvcserver in the
+proper order::
+
+ modprobe -r hvcs
+
+4. Installation:
+================
+
+The tty layer creates sysfs entries which contain the major and minor
+numbers allocated for the hvcs driver. The following snippet of "tree"
+output of the sysfs directory shows where these numbers are presented::
+
+ sys/
+ |-- *other sysfs base dirs*
+ |
+ |-- class
+ | |-- *other classes of devices*
+ | |
+ | `-- tty
+ | |-- *other tty devices*
+ | |
+ | |-- hvcs0
+ | | `-- dev
+ | |-- hvcs1
+ | | `-- dev
+ | |-- hvcs2
+ | | `-- dev
+ | |-- hvcs3
+ | | `-- dev
+ | |
+ | |-- *other tty devices*
+ |
+ |-- *other sysfs base dirs*
+
+For the above examples the following output is a result of cat'ing the
+"dev" entry in the hvcs directory::
+
+ Pow5:/sys/class/tty/hvcs0/ # cat dev
+ 254:0
+
+ Pow5:/sys/class/tty/hvcs1/ # cat dev
+ 254:1
+
+ Pow5:/sys/class/tty/hvcs2/ # cat dev
+ 254:2
+
+ Pow5:/sys/class/tty/hvcs3/ # cat dev
+ 254:3
+
+The output from reading the "dev" attribute is the char device major and
+minor numbers that the tty layer has allocated for this driver's use. Most
+systems running hvcs will already have the device entries created or udev
+will do it automatically.
+
+Given the example output above, to manually create a /dev/hvcs* node entry
+mknod can be used as follows::
+
+ mknod /dev/hvcs0 c 254 0
+ mknod /dev/hvcs1 c 254 1
+ mknod /dev/hvcs2 c 254 2
+ mknod /dev/hvcs3 c 254 3
+
+Using mknod to manually create the device entries makes these device nodes
+persistent. Once created they will exist prior to the driver insmod.
+
+Attempting to connect an application to /dev/hvcs* prior to insertion of
+the hvcs module will result in an error message similar to the following::
+
+ "/dev/hvcs*: No such device".
+
+NOTE: Just because there is a device node present doesn't mean that there
+is a vty-server device configured for that node.
+
+5. Connection
+=============
+
+Since this driver controls devices that provide a tty interface a user can
+interact with the device node entries using any standard tty-interactive
+method (e.g. "cat", "dd", "echo"). The intent of this driver however, is
+to provide real time console interaction with a Linux partition's console,
+which requires the use of applications that provide bi-directional,
+interactive I/O with a tty device.
+
+Applications (e.g. "minicom" and "screen") that act as terminal emulators
+or perform terminal type control sequence conversion on the data being
+passed through them are NOT acceptable for providing interactive console
+I/O. These programs often emulate antiquated terminal types (vt100 and
+ANSI) and expect inbound data to take the form of one of these supported
+terminal types but they either do not convert, or do not _adequately_
+convert, outbound data into the terminal type of the terminal which invoked
+them (though screen makes an attempt and can apparently be configured with
+much termcap wrestling.)
+
+For this reason kermit and cu are two of the recommended applications for
+interacting with a Linux console via an hvcs device. These programs simply
+act as a conduit for data transfer to and from the tty device. They do not
+require inbound data to take the form of a particular terminal type, nor do
+they cook outbound data to a particular terminal type.
+
+In order to ensure proper functioning of console applications one must make
+sure that once connected to a /dev/hvcs console that the console's $TERM
+env variable is set to the exact terminal type of the terminal emulator
+used to launch the interactive I/O application. If one is using xterm and
+kermit to connect to /dev/hvcs0 when the console prompt becomes available
+one should "export TERM=xterm" on the console. This tells ncurses
+applications that are invoked from the console that they should output
+control sequences that xterm can understand.
+
+As a precautionary measure an hvcs user should always "exit" from their
+session before disconnecting an application such as kermit from the device
+node. If this is not done, the next user to connect to the console will
+continue using the previous user's logged in session which includes
+using the $TERM variable that the previous user supplied.
+
+Hotplug add and remove of vty-server adapters affects which /dev/hvcs* node
+is used to connect to each vty-server adapter. In order to determine which
+vty-server adapter is associated with which /dev/hvcs* node a special sysfs
+attribute has been added to each vty-server sysfs entry. This entry is
+called "index" and showing it reveals an integer that refers to the
+/dev/hvcs* entry to use to connect to that device. For instance cating the
+index attribute of vty-server adapter 30000004 shows the following::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat index
+ 2
+
+This index of '2' means that in order to connect to vty-server adapter
+30000004 the user should interact with /dev/hvcs2.
+
+It should be noted that due to the system hotplug I/O capabilities of a
+system the /dev/hvcs* entry that interacts with a particular vty-server
+adapter is not guaranteed to remain the same across system reboots. Look
+in the Q & A section for more on this issue.
+
+6. Disconnection
+================
+
+As a security feature to prevent the delivery of stale data to an
+unintended target the Power5 system firmware disables the fetching of data
+and discards that data when a connection between a vty-server and a vty has
+been severed. As an example, when a vty-server is immediately disconnected
+from a vty following output of data to the vty the vty adapter may not have
+enough time between when it received the data interrupt and when the
+connection was severed to fetch the data from firmware before the fetch is
+disabled by firmware.
+
+When hvcs is being used to serve consoles this behavior is not a huge issue
+because the adapter stays connected for large amounts of time following
+almost all data writes. When hvcs is being used as a tty conduit to tunnel
+data between two partitions [see Q & A below] this is a huge problem
+because the standard Linux behavior when cat'ing or dd'ing data to a device
+is to open the tty, send the data, and then close the tty. If this driver
+manually terminated vty-server connections on tty close this would close
+the vty-server and vty connection before the target vty has had a chance to
+fetch the data.
+
+Additionally, disconnecting a vty-server and vty only on module removal or
+adapter removal is impractical because other vty-servers in other
+partitions may require the usage of the target vty at any time.
+
+Due to this behavioral restriction disconnection of vty-servers from the
+connected vty is a manual procedure using a write to a sysfs attribute
+outlined below, on the other hand the initial vty-server connection to a
+vty is established automatically by this driver. Manual vty-server
+connection is never required.
+
+In order to terminate the connection between a vty-server and vty the
+"vterm_state" sysfs attribute within each vty-server's sysfs entry is used.
+Reading this attribute reveals the current connection state of the
+vty-server adapter. A zero means that the vty-server is not connected to a
+vty. A one indicates that a connection is active.
+
+Writing a '0' (zero) to the vterm_state attribute will disconnect the VTERM
+connection between the vty-server and target vty ONLY if the vterm_state
+previously read '1'. The write directive is ignored if the vterm_state
+read '0' or if any value other than '0' was written to the vterm_state
+attribute. The following example will show the method used for verifying
+the vty-server connection status and disconnecting a vty-server connection::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
+ 1
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo 0 > vterm_state
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat vterm_state
+ 0
+
+All vty-server connections are automatically terminated when the device is
+hotplug removed and when the module is removed.
+
+7. Configuration
+================
+
+Each vty-server has a sysfs entry in the /sys/devices/vio directory, which
+is symlinked in several other sysfs tree directories, notably under the
+hvcs driver entry, which looks like the following example::
+
+ Pow5:/sys/bus/vio/drivers/hvcs # ls
+ . .. 30000003 30000004 rescan
+
+By design, firmware notifies the hvcs driver of vty-server lifetimes and
+partner vty removals but not the addition of partner vtys. Since an HMC
+Super Admin can add partner info dynamically we have provided the hvcs
+driver sysfs directory with the "rescan" update attribute which will query
+firmware and update the partner info for all the vty-servers that this
+driver manages. Writing a '1' to the attribute triggers the update. An
+explicit example follows:
+
+ Pow5:/sys/bus/vio/drivers/hvcs # echo 1 > rescan
+
+Reading the attribute will indicate a state of '1' or '0'. A one indicates
+that an update is in process. A zero indicates that an update has
+completed or was never executed.
+
+Vty-server entries in this directory are a 32 bit partition unique unit
+address that is created by firmware. An example vty-server sysfs entry
+looks like the following::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
+ . current_vty devspec name partner_vtys
+ .. index partner_clcs vterm_state
+
+Each entry is provided, by default with a "name" attribute. Reading the
+"name" attribute will reveal the device type as shown in the following
+example::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000003 # cat name
+ vty-server
+
+Each entry is also provided, by default, with a "devspec" attribute which
+reveals the full device specification when read, as shown in the following
+example::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat devspec
+ /vdevice/vty-server@30000004
+
+Each vty-server sysfs dir is provided with two read-only attributes that
+provide lists of easily parsed partner vty data: "partner_vtys" and
+"partner_clcs"::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_vtys
+ 30000000
+ 30000001
+ 30000002
+ 30000000
+ 30000000
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # cat partner_clcs
+ U5112.428.103048A-V3-C0
+ U5112.428.103048A-V3-C2
+ U5112.428.103048A-V3-C3
+ U5112.428.103048A-V4-C0
+ U5112.428.103048A-V5-C0
+
+Reading partner_vtys returns a list of partner vtys. Vty unit address
+numbering is only per-partition-unique so entries will frequently repeat.
+
+Reading partner_clcs returns a list of "converged location codes" which are
+composed of a system serial number followed by "-V*", where the '*' is the
+target partition number, and "-C*", where the '*' is the slot of the
+adapter. The first vty partner corresponds to the first clc item, the
+second vty partner to the second clc item, etc.
+
+A vty-server can only be connected to a single vty at a time. The entry,
+"current_vty" prints the clc of the currently selected partner vty when
+read.
+
+The current_vty can be changed by writing a valid partner clc to the entry
+as in the following example::
+
+ Pow5:/sys/bus/vio/drivers/hvcs/30000004 # echo U5112.428.10304
+ 8A-V4-C0 > current_vty
+
+Changing the current_vty when a vty-server is already connected to a vty
+does not affect the current connection. The change takes effect when the
+currently open connection is freed.
+
+Information on the "vterm_state" attribute was covered earlier on the
+chapter entitled "disconnection".
+
+8. Questions & Answers:
+=======================
+
+Q: What are the security concerns involving hvcs?
+
+A: There are three main security concerns:
+
+ 1. The creator of the /dev/hvcs* nodes has the ability to restrict
+ the access of the device entries to certain users or groups. It
+ may be best to create a special hvcs group privilege for providing
+ access to system consoles.
+
+ 2. To provide network security when grabbing the console it is
+ suggested that the user connect to the console hosting partition
+ using a secure method, such as SSH or sit at a hardware console.
+
+ 3. Make sure to exit the user session when done with a console or
+ the next vty-server connection (which may be from another
+ partition) will experience the previously logged in session.
+
+---------------------------------------------------------------------------
+
+Q: How do I multiplex a console that I grab through hvcs so that other
+people can see it:
+
+A: You can use "screen" to directly connect to the /dev/hvcs* device and
+setup a session on your machine with the console group privileges. As
+pointed out earlier by default screen doesn't provide the termcap settings
+for most terminal emulators to provide adequate character conversion from
+term type "screen" to others. This means that curses based programs may
+not display properly in screen sessions.
+
+---------------------------------------------------------------------------
+
+Q: Why are the colors all messed up?
+Q: Why are the control characters acting strange or not working?
+Q: Why is the console output all strange and unintelligible?
+
+A: Please see the preceding section on "Connection" for a discussion of how
+applications can affect the display of character control sequences.
+Additionally, just because you logged into the console using and xterm
+doesn't mean someone else didn't log into the console with the HMC console
+(vt320) before you and leave the session logged in. The best thing to do
+is to export TERM to the terminal type of your terminal emulator when you
+get the console. Additionally make sure to "exit" the console before you
+disconnect from the console. This will ensure that the next user gets
+their own TERM type set when they login.
+
+---------------------------------------------------------------------------
+
+Q: When I try to CONNECT kermit to an hvcs device I get:
+"Sorry, can't open connection: /dev/hvcs*"What is happening?
+
+A: Some other Power5 console mechanism has a connection to the vty and
+isn't giving it up. You can try to force disconnect the consoles from the
+HMC by right clicking on the partition and then selecting "close terminal".
+Otherwise you have to hunt down the people who have console authority. It
+is possible that you already have the console open using another kermit
+session and just forgot about it. Please review the console options for
+Power5 systems to determine the many ways a system console can be held.
+
+OR
+
+A: Another user may not have a connectivity method currently attached to a
+/dev/hvcs device but the vterm_state may reveal that they still have the
+vty-server connection established. They need to free this using the method
+outlined in the section on "Disconnection" in order for others to connect
+to the target vty.
+
+OR
+
+A: The user profile you are using to execute kermit probably doesn't have
+permissions to use the /dev/hvcs* device.
+
+OR
+
+A: You probably haven't inserted the hvcs.ko module yet but the /dev/hvcs*
+entry still exists (on systems without udev).
+
+OR
+
+A: There is not a corresponding vty-server device that maps to an existing
+/dev/hvcs* entry.
+
+---------------------------------------------------------------------------
+
+Q: When I try to CONNECT kermit to an hvcs device I get:
+"Sorry, write access to UUCP lockfile directory denied."
+
+A: The /dev/hvcs* entry you have specified doesn't exist where you said it
+does? Maybe you haven't inserted the module (on systems with udev).
+
+---------------------------------------------------------------------------
+
+Q: If I already have one Linux partition installed can I use hvcs on said
+partition to provide the console for the install of a second Linux
+partition?
+
+A: Yes granted that your are connected to the /dev/hvcs* device using
+kermit or cu or some other program that doesn't provide terminal emulation.
+
+---------------------------------------------------------------------------
+
+Q: Can I connect to more than one partition's console at a time using this
+driver?
+
+A: Yes. Of course this means that there must be more than one vty-server
+configured for this partition and each must point to a disconnected vty.
+
+---------------------------------------------------------------------------
+
+Q: Does the hvcs driver support dynamic (hotplug) addition of devices?
+
+A: Yes, if you have dlpar and hotplug enabled for your system and it has
+been built into the kernel the hvcs drivers is configured to dynamically
+handle additions of new devices and removals of unused devices.
+
+---------------------------------------------------------------------------
+
+Q: For some reason /dev/hvcs* doesn't map to the same vty-server adapter
+after a reboot. What happened?
+
+A: Assignment of vty-server adapters to /dev/hvcs* entries is always done
+in the order that the adapters are exposed. Due to hotplug capabilities of
+this driver assignment of hotplug added vty-servers may be in a different
+order than how they would be exposed on module load. Rebooting or
+reloading the module after dynamic addition may result in the /dev/hvcs*
+and vty-server coupling changing if a vty-server adapter was added in a
+slot between two other vty-server adapters. Refer to the section above
+on how to determine which vty-server goes with which /dev/hvcs* node.
+Hint; look at the sysfs "index" attribute for the vty-server.
+
+---------------------------------------------------------------------------
+
+Q: Can I use /dev/hvcs* as a conduit to another partition and use a tty
+device on that partition as the other end of the pipe?
+
+A: Yes, on Power5 platforms the hvc_console driver provides a tty interface
+for extra /dev/hvc* devices (where /dev/hvc0 is most likely the console).
+In order to get a tty conduit working between the two partitions the HMC
+Super Admin must create an additional "serial server" for the target
+partition with the HMC gui which will show up as /dev/hvc* when the target
+partition is rebooted.
+
+The HMC Super Admin then creates an additional "serial client" for the
+current partition and points this at the target partition's newly created
+"serial server" adapter (remember the slot). This shows up as an
+additional /dev/hvcs* device.
+
+Now a program on the target system can be configured to read or write to
+/dev/hvc* and another program on the current partition can be configured to
+read or write to /dev/hvcs*. Now you have a tty conduit between two
+partitions.
+
+---------------------------------------------------------------------------
+
+9. Reporting Bugs:
+==================
+
+The proper channel for reporting bugs is either through the Linux OS
+distribution company that provided your OS or by posting issues to the
+PowerPC development mailing list at:
+
+linuxppc-dev@lists.ozlabs.org
+
+This request is to provide a documented and searchable public exchange
+of the problems and solutions surrounding this driver for the benefit of
+all users.
diff --git a/Documentation/arch/powerpc/imc.rst b/Documentation/arch/powerpc/imc.rst
new file mode 100644
index 0000000000..633bcee7dc
--- /dev/null
+++ b/Documentation/arch/powerpc/imc.rst
@@ -0,0 +1,199 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _imc:
+
+===================================
+IMC (In-Memory Collection Counters)
+===================================
+
+Anju T Sudhakar, 10 May 2019
+
+.. contents::
+ :depth: 3
+
+
+Basic overview
+==============
+
+IMC (In-Memory collection counters) is a hardware monitoring facility that
+collects large numbers of hardware performance events at Nest level (these are
+on-chip but off-core), Core level and Thread level.
+
+The Nest PMU counters are handled by a Nest IMC microcode which runs in the OCC
+(On-Chip Controller) complex. The microcode collects the counter data and moves
+the nest IMC counter data to memory.
+
+The Core and Thread IMC PMU counters are handled in the core. Core level PMU
+counters give us the IMC counters' data per core and thread level PMU counters
+give us the IMC counters' data per CPU thread.
+
+OPAL obtains the IMC PMU and supported events information from the IMC Catalog
+and passes on to the kernel via the device tree. The event's information
+contains:
+
+- Event name
+- Event Offset
+- Event description
+
+and possibly also:
+
+- Event scale
+- Event unit
+
+Some PMUs may have a common scale and unit values for all their supported
+events. For those cases, the scale and unit properties for those events must be
+inherited from the PMU.
+
+The event offset in the memory is where the counter data gets accumulated.
+
+IMC catalog is available at:
+ https://github.com/open-power/ima-catalog
+
+The kernel discovers the IMC counters information in the device tree at the
+`imc-counters` device node which has a compatible field
+`ibm,opal-in-memory-counters`. From the device tree, the kernel parses the PMUs
+and their event's information and register the PMU and its attributes in the
+kernel.
+
+IMC example usage
+=================
+
+.. code-block:: sh
+
+ # perf list
+ [...]
+ nest_mcs01/PM_MCS01_64B_RD_DISP_PORT01/ [Kernel PMU event]
+ nest_mcs01/PM_MCS01_64B_RD_DISP_PORT23/ [Kernel PMU event]
+ [...]
+ core_imc/CPM_0THRD_NON_IDLE_PCYC/ [Kernel PMU event]
+ core_imc/CPM_1THRD_NON_IDLE_INST/ [Kernel PMU event]
+ [...]
+ thread_imc/CPM_0THRD_NON_IDLE_PCYC/ [Kernel PMU event]
+ thread_imc/CPM_1THRD_NON_IDLE_INST/ [Kernel PMU event]
+
+To see per chip data for nest_mcs0/PM_MCS_DOWN_128B_DATA_XFER_MC0/:
+
+.. code-block:: sh
+
+ # ./perf stat -e "nest_mcs01/PM_MCS01_64B_WR_DISP_PORT01/" -a --per-socket
+
+To see non-idle instructions for core 0:
+
+.. code-block:: sh
+
+ # ./perf stat -e "core_imc/CPM_NON_IDLE_INST/" -C 0 -I 1000
+
+To see non-idle instructions for a "make":
+
+.. code-block:: sh
+
+ # ./perf stat -e "thread_imc/CPM_NON_IDLE_PCYC/" make
+
+
+IMC Trace-mode
+===============
+
+POWER9 supports two modes for IMC which are the Accumulation mode and Trace
+mode. In Accumulation mode, event counts are accumulated in system Memory.
+Hypervisor then reads the posted counts periodically or when requested. In IMC
+Trace mode, the 64 bit trace SCOM value is initialized with the event
+information. The CPMCxSEL and CPMC_LOAD in the trace SCOM, specifies the event
+to be monitored and the sampling duration. On each overflow in the CPMCxSEL,
+hardware snapshots the program counter along with event counts and writes into
+memory pointed by LDBAR.
+
+LDBAR is a 64 bit special purpose per thread register, it has bits to indicate
+whether hardware is configured for accumulation or trace mode.
+
+LDBAR Register Layout
+---------------------
+
+ +-------+----------------------+
+ | 0 | Enable/Disable |
+ +-------+----------------------+
+ | 1 | 0: Accumulation Mode |
+ | +----------------------+
+ | | 1: Trace Mode |
+ +-------+----------------------+
+ | 2:3 | Reserved |
+ +-------+----------------------+
+ | 4-6 | PB scope |
+ +-------+----------------------+
+ | 7 | Reserved |
+ +-------+----------------------+
+ | 8:50 | Counter Address |
+ +-------+----------------------+
+ | 51:63 | Reserved |
+ +-------+----------------------+
+
+TRACE_IMC_SCOM bit representation
+---------------------------------
+
+ +-------+------------+
+ | 0:1 | SAMPSEL |
+ +-------+------------+
+ | 2:33 | CPMC_LOAD |
+ +-------+------------+
+ | 34:40 | CPMC1SEL |
+ +-------+------------+
+ | 41:47 | CPMC2SEL |
+ +-------+------------+
+ | 48:50 | BUFFERSIZE |
+ +-------+------------+
+ | 51:63 | RESERVED |
+ +-------+------------+
+
+CPMC_LOAD contains the sampling duration. SAMPSEL and CPMCxSEL determines the
+event to count. BUFFERSIZE indicates the memory range. On each overflow,
+hardware snapshots the program counter along with event counts and updates the
+memory and reloads the CMPC_LOAD value for the next sampling duration. IMC
+hardware does not support exceptions, so it quietly wraps around if memory
+buffer reaches the end.
+
+*Currently the event monitored for trace-mode is fixed as cycle.*
+
+Trace IMC example usage
+=======================
+
+.. code-block:: sh
+
+ # perf list
+ [....]
+ trace_imc/trace_cycles/ [Kernel PMU event]
+
+To record an application/process with trace-imc event:
+
+.. code-block:: sh
+
+ # perf record -e trace_imc/trace_cycles/ yes > /dev/null
+ [ perf record: Woken up 1 times to write data ]
+ [ perf record: Captured and wrote 0.012 MB perf.data (21 samples) ]
+
+The `perf.data` generated, can be read using perf report.
+
+Benefits of using IMC trace-mode
+================================
+
+PMI (Performance Monitoring Interrupts) interrupt handling is avoided, since IMC
+trace mode snapshots the program counter and updates to the memory. And this
+also provide a way for the operating system to do instruction sampling in real
+time without PMI processing overhead.
+
+Performance data using `perf top` with and without trace-imc event.
+
+PMI interrupts count when `perf top` command is executed without trace-imc event.
+
+.. code-block:: sh
+
+ # grep PMI /proc/interrupts
+ PMI: 0 0 0 0 Performance monitoring interrupts
+ # ./perf top
+ ...
+ # grep PMI /proc/interrupts
+ PMI: 39735 8710 17338 17801 Performance monitoring interrupts
+ # ./perf top -e trace_imc/trace_cycles/
+ ...
+ # grep PMI /proc/interrupts
+ PMI: 39735 8710 17338 17801 Performance monitoring interrupts
+
+
+That is, the PMI interrupt counts do not increment when using the `trace_imc` event.
diff --git a/Documentation/arch/powerpc/index.rst b/Documentation/arch/powerpc/index.rst
new file mode 100644
index 0000000000..9749f6dc25
--- /dev/null
+++ b/Documentation/arch/powerpc/index.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+powerpc
+=======
+
+.. toctree::
+ :maxdepth: 1
+
+ associativity
+ booting
+ bootwrapper
+ cpu_families
+ cpu_features
+ cxl
+ cxlflash
+ dawr-power9
+ dexcr
+ dscr
+ eeh-pci-error-recovery
+ elf_hwcaps
+ elfnote
+ firmware-assisted-dump
+ hvcs
+ imc
+ isa-versions
+ kaslr-booke32
+ mpc52xx
+ kvm-nested
+ papr_hcalls
+ pci_iov_resource_on_powernv
+ pmu-ebb
+ ptrace
+ qe_firmware
+ syscall64-abi
+ transactional_memory
+ ultravisor
+ vas-api
+ vcpudispatch_stats
+ vmemmap_dedup
+
+ features
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/arch/powerpc/isa-versions.rst b/Documentation/arch/powerpc/isa-versions.rst
new file mode 100644
index 0000000000..a8d6b6028b
--- /dev/null
+++ b/Documentation/arch/powerpc/isa-versions.rst
@@ -0,0 +1,101 @@
+==========================
+CPU to ISA Version Mapping
+==========================
+
+Mapping of some CPU versions to relevant ISA versions.
+
+Note Power4 and Power4+ are not supported.
+
+========= ====================================================================
+CPU Architecture version
+========= ====================================================================
+Power10 Power ISA v3.1
+Power9 Power ISA v3.0B
+Power8 Power ISA v2.07
+e6500 Power ISA v2.06 with some exceptions
+e5500 Power ISA v2.06 with some exceptions, no Altivec
+Power7 Power ISA v2.06
+Power6 Power ISA v2.05
+PA6T Power ISA v2.04
+Cell PPU - Power ISA v2.02 with some minor exceptions
+ - Plus Altivec/VMX ~= 2.03
+Power5++ Power ISA v2.04 (no VMX)
+Power5+ Power ISA v2.03
+Power5 - PowerPC User Instruction Set Architecture Book I v2.02
+ - PowerPC Virtual Environment Architecture Book II v2.02
+ - PowerPC Operating Environment Architecture Book III v2.02
+PPC970 - PowerPC User Instruction Set Architecture Book I v2.01
+ - PowerPC Virtual Environment Architecture Book II v2.01
+ - PowerPC Operating Environment Architecture Book III v2.01
+ - Plus Altivec/VMX ~= 2.03
+Power4+ - PowerPC User Instruction Set Architecture Book I v2.01
+ - PowerPC Virtual Environment Architecture Book II v2.01
+ - PowerPC Operating Environment Architecture Book III v2.01
+Power4 - PowerPC User Instruction Set Architecture Book I v2.00
+ - PowerPC Virtual Environment Architecture Book II v2.00
+ - PowerPC Operating Environment Architecture Book III v2.00
+========= ====================================================================
+
+
+Key Features
+------------
+
+========== ==================
+CPU VMX (aka. Altivec)
+========== ==================
+Power10 Yes
+Power9 Yes
+Power8 Yes
+e6500 Yes
+e5500 No
+Power7 Yes
+Power6 Yes
+PA6T Yes
+Cell PPU Yes
+Power5++ No
+Power5+ No
+Power5 No
+PPC970 Yes
+Power4+ No
+Power4 No
+========== ==================
+
+========== ====
+CPU VSX
+========== ====
+Power10 Yes
+Power9 Yes
+Power8 Yes
+e6500 No
+e5500 No
+Power7 Yes
+Power6 No
+PA6T No
+Cell PPU No
+Power5++ No
+Power5+ No
+Power5 No
+PPC970 No
+Power4+ No
+Power4 No
+========== ====
+
+========== ====================================
+CPU Transactional Memory
+========== ====================================
+Power10 No (* see Power ISA v3.1, "Appendix A. Notes on the Removal of Transactional Memory from the Architecture")
+Power9 Yes (* see transactional_memory.txt)
+Power8 Yes
+e6500 No
+e5500 No
+Power7 No
+Power6 No
+PA6T No
+Cell PPU No
+Power5++ No
+Power5+ No
+Power5 No
+PPC970 No
+Power4+ No
+Power4 No
+========== ====================================
diff --git a/Documentation/arch/powerpc/kasan.txt b/Documentation/arch/powerpc/kasan.txt
new file mode 100644
index 0000000000..a4f647e4ff
--- /dev/null
+++ b/Documentation/arch/powerpc/kasan.txt
@@ -0,0 +1,58 @@
+KASAN is supported on powerpc on 32-bit and Radix 64-bit only.
+
+32 bit support
+==============
+
+KASAN is supported on both hash and nohash MMUs on 32-bit.
+
+The shadow area sits at the top of the kernel virtual memory space above the
+fixmap area and occupies one eighth of the total kernel virtual memory space.
+
+Instrumentation of the vmalloc area is optional, unless built with modules,
+in which case it is required.
+
+64 bit support
+==============
+
+Currently, only the radix MMU is supported. There have been versions for hash
+and Book3E processors floating around on the mailing list, but nothing has been
+merged.
+
+KASAN support on Book3S is a bit tricky to get right:
+
+ - It would be good to support inline instrumentation so as to be able to catch
+ stack issues that cannot be caught with outline mode.
+
+ - Inline instrumentation requires a fixed offset.
+
+ - Book3S runs code with translations off ("real mode") during boot, including a
+ lot of generic device-tree parsing code which is used to determine MMU
+ features.
+
+ - Some code - most notably a lot of KVM code - also runs with translations off
+ after boot.
+
+ - Therefore any offset has to point to memory that is valid with
+ translations on or off.
+
+One approach is just to give up on inline instrumentation. This way boot-time
+checks can be delayed until after the MMU is set is up, and we can just not
+instrument any code that runs with translations off after booting. This is the
+current approach.
+
+To avoid this limitation, the KASAN shadow would have to be placed inside the
+linear mapping, using the same high-bits trick we use for the rest of the linear
+mapping. This is tricky:
+
+ - We'd like to place it near the start of physical memory. In theory we can do
+ this at run-time based on how much physical memory we have, but this requires
+ being able to arbitrarily relocate the kernel, which is basically the tricky
+ part of KASLR. Not being game to implement both tricky things at once, this
+ is hopefully something we can revisit once we get KASLR for Book3S.
+
+ - Alternatively, we can place the shadow at the _end_ of memory, but this
+ requires knowing how much contiguous physical memory a system has _at compile
+ time_. This is a big hammer, and has some unfortunate consequences: inablity
+ to handle discontiguous physical memory, total failure to boot on machines
+ with less memory than specified, and that machines with more memory than
+ specified can't use it. This was deemed unacceptable.
diff --git a/Documentation/arch/powerpc/kaslr-booke32.rst b/Documentation/arch/powerpc/kaslr-booke32.rst
new file mode 100644
index 0000000000..5681c1d1b6
--- /dev/null
+++ b/Documentation/arch/powerpc/kaslr-booke32.rst
@@ -0,0 +1,42 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+KASLR for Freescale BookE32
+===========================
+
+The word KASLR stands for Kernel Address Space Layout Randomization.
+
+This document tries to explain the implementation of the KASLR for
+Freescale BookE32. KASLR is a security feature that deters exploit
+attempts relying on knowledge of the location of kernel internals.
+
+Since CONFIG_RELOCATABLE has already supported, what we need to do is
+map or copy kernel to a proper place and relocate. Freescale Book-E
+parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1
+entries are not suitable to map the kernel directly in a randomized
+region, so we chose to copy the kernel to a proper place and restart to
+relocate.
+
+Entropy is derived from the banner and timer base, which will change every
+build and boot. This not so much safe so additionally the bootloader may
+pass entropy via the /chosen/kaslr-seed node in device tree.
+
+We will use the first 512M of the low memory to randomize the kernel
+image. The memory will be split in 64M zones. We will use the lower 8
+bit of the entropy to decide the index of the 64M zone. Then we chose a
+16K aligned offset inside the 64M zone to put the kernel in::
+
+ KERNELBASE
+
+ |--> 64M <--|
+ | |
+ +---------------+ +----------------+---------------+
+ | |....| |kernel| | |
+ +---------------+ +----------------+---------------+
+ | |
+ |-----> offset <-----|
+
+ kernstart_virt_addr
+
+To enable KASLR, set CONFIG_RANDOMIZE_BASE = y. If KASLR is enabled and you
+want to disable it at runtime, add "nokaslr" to the kernel cmdline.
diff --git a/Documentation/arch/powerpc/kvm-nested.rst b/Documentation/arch/powerpc/kvm-nested.rst
new file mode 100644
index 0000000000..630602a8aa
--- /dev/null
+++ b/Documentation/arch/powerpc/kvm-nested.rst
@@ -0,0 +1,634 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================
+Nested KVM on POWER
+====================================
+
+Introduction
+============
+
+This document explains how a guest operating system can act as a
+hypervisor and run nested guests through the use of hypercalls, if the
+hypervisor has implemented them. The terms L0, L1, and L2 are used to
+refer to different software entities. L0 is the hypervisor mode entity
+that would normally be called the "host" or "hypervisor". L1 is a
+guest virtual machine that is directly run under L0 and is initiated
+and controlled by L0. L2 is a guest virtual machine that is initiated
+and controlled by L1 acting as a hypervisor.
+
+Existing API
+============
+
+Linux/KVM has had support for Nesting as an L0 or L1 since 2018
+
+The L0 code was added::
+
+ commit 8e3f5fc1045dc49fd175b978c5457f5f51e7a2ce
+ Author: Paul Mackerras <paulus@ozlabs.org>
+ Date: Mon Oct 8 16:31:03 2018 +1100
+ KVM: PPC: Book3S HV: Framework and hcall stubs for nested virtualization
+
+The L1 code was added::
+
+ commit 360cae313702cdd0b90f82c261a8302fecef030a
+ Author: Paul Mackerras <paulus@ozlabs.org>
+ Date: Mon Oct 8 16:31:04 2018 +1100
+ KVM: PPC: Book3S HV: Nested guest entry via hypercall
+
+This API works primarily using a single hcall h_enter_nested(). This
+call made by the L1 to tell the L0 to start an L2 vCPU with the given
+state. The L0 then starts this L2 and runs until an L2 exit condition
+is reached. Once the L2 exits, the state of the L2 is given back to
+the L1 by the L0. The full L2 vCPU state is always transferred from
+and to L1 when the L2 is run. The L0 doesn't keep any state on the L2
+vCPU (except in the short sequence in the L0 on L1 -> L2 entry and L2
+-> L1 exit).
+
+The only state kept by the L0 is the partition table. The L1 registers
+it's partition table using the h_set_partition_table() hcall. All
+other state held by the L0 about the L2s is cached state (such as
+shadow page tables).
+
+The L1 may run any L2 or vCPU without first informing the L0. It
+simply starts the vCPU using h_enter_nested(). The creation of L2s and
+vCPUs is done implicitly whenever h_enter_nested() is called.
+
+In this document, we call this existing API the v1 API.
+
+New PAPR API
+===============
+
+The new PAPR API changes from the v1 API such that the creating L2 and
+associated vCPUs is explicit. In this document, we call this the v2
+API.
+
+h_enter_nested() is replaced with H_GUEST_VCPU_RUN(). Before this can
+be called the L1 must explicitly create the L2 using h_guest_create()
+and any associated vCPUs() created with h_guest_create_vCPU(). Getting
+and setting vCPU state can also be performed using h_guest_{g|s}et
+hcall.
+
+The basic execution flow is for an L1 to create an L2, run it, and
+delete it is:
+
+- L1 and L0 negotiate capabilities with H_GUEST_{G,S}ET_CAPABILITIES()
+ (normally at L1 boot time).
+
+- L1 requests the L0 create an L2 with H_GUEST_CREATE() and receives a token
+
+- L1 requests the L0 create an L2 vCPU with H_GUEST_CREATE_VCPU()
+
+- L1 and L0 communicate the vCPU state using the H_GUEST_{G,S}ET() hcall
+
+- L1 requests the L0 runs the vCPU running H_GUEST_VCPU_RUN() hcall
+
+- L1 deletes L2 with H_GUEST_DELETE()
+
+More details of the individual hcalls follows:
+
+HCALL Details
+=============
+
+This documentation is provided to give an overall understating of the
+API. It doesn't aim to provide all the details required to implement
+an L1 or L0. Latest version of PAPR can be referred to for more details.
+
+All these HCALLs are made by the L1 to the L0.
+
+H_GUEST_GET_CAPABILITIES()
+--------------------------
+
+This is called to get the capabilities of the L0 nested
+hypervisor. This includes capabilities such the CPU versions (eg
+POWER9, POWER10) that are supported as L2s::
+
+ H_GUEST_GET_CAPABILITIES(uint64 flags)
+
+ Parameters:
+ Input:
+ flags: Reserved
+ Output:
+ R3: Return code
+ R4: Hypervisor Supported Capabilities bitmap 1
+
+H_GUEST_SET_CAPABILITIES()
+--------------------------
+
+This is called to inform the L0 of the capabilities of the L1
+hypervisor. The set of flags passed here are the same as
+H_GUEST_GET_CAPABILITIES()
+
+Typically, GET will be called first and then SET will be called with a
+subset of the flags returned from GET. This process allows the L0 and
+L1 to negotiate an agreed set of capabilities::
+
+ H_GUEST_SET_CAPABILITIES(uint64 flags,
+ uint64 capabilitiesBitmap1)
+ Parameters:
+ Input:
+ flags: Reserved
+ capabilitiesBitmap1: Only capabilities advertised through
+ H_GUEST_GET_CAPABILITIES
+ Output:
+ R3: Return code
+ R4: If R3 = H_P2: The number of invalid bitmaps
+ R5: If R3 = H_P2: The index of first invalid bitmap
+
+H_GUEST_CREATE()
+----------------
+
+This is called to create an L2. A unique ID of the L2 created
+(similar to an LPID) is returned, which can be used on subsequent HCALLs to
+identify the L2::
+
+ H_GUEST_CREATE(uint64 flags,
+ uint64 continueToken);
+ Parameters:
+ Input:
+ flags: Reserved
+ continueToken: Initial call set to -1. Subsequent calls,
+ after H_Busy or H_LongBusyOrder has been
+ returned, value that was returned in R4.
+ Output:
+ R3: Return code. Notable:
+ H_Not_Enough_Resources: Unable to create Guest VCPU due to not
+ enough Hypervisor memory. See H_GUEST_CREATE_GET_STATE(flags =
+ takeOwnershipOfVcpuState)
+ R4: If R3 = H_Busy or_H_LongBusyOrder -> continueToken
+
+H_GUEST_CREATE_VCPU()
+---------------------
+
+This is called to create a vCPU associated with an L2. The L2 id
+(returned from H_GUEST_CREATE()) should be passed it. Also passed in
+is a unique (for this L2) vCPUid. This vCPUid is allocated by the
+L1::
+
+ H_GUEST_CREATE_VCPU(uint64 flags,
+ uint64 guestId,
+ uint64 vcpuId);
+ Parameters:
+ Input:
+ flags: Reserved
+ guestId: ID obtained from H_GUEST_CREATE
+ vcpuId: ID of the vCPU to be created. This must be within the
+ range of 0 to 2047
+ Output:
+ R3: Return code. Notable:
+ H_Not_Enough_Resources: Unable to create Guest VCPU due to not
+ enough Hypervisor memory. See H_GUEST_CREATE_GET_STATE(flags =
+ takeOwnershipOfVcpuState)
+
+H_GUEST_GET_STATE()
+-------------------
+
+This is called to get state associated with an L2 (Guest-wide or vCPU specific).
+This info is passed via the Guest State Buffer (GSB), a standard format as
+explained later in this doc, necessary details below:
+
+This can get either L2 wide or vcpu specific information. Examples of
+L2 wide is the timebase offset or process scoped page table
+info. Examples of vCPU specific are GPRs or VSRs. A bit in the flags
+parameter specifies if this call is L2 wide or vCPU specific and the
+IDs in the GSB must match this.
+
+The L1 provides a pointer to the GSB as a parameter to this call. Also
+provided is the L2 and vCPU IDs associated with the state to set.
+
+The L1 writes only the IDs and sizes in the GSB. L0 writes the
+associated values for each ID in the GSB::
+
+ H_GUEST_GET_STATE(uint64 flags,
+ uint64 guestId,
+ uint64 vcpuId,
+ uint64 dataBuffer,
+ uint64 dataBufferSizeInBytes);
+ Parameters:
+ Input:
+ flags:
+ Bit 0: getGuestWideState: Request state of the Guest instead
+ of an individual VCPU.
+ Bit 1: takeOwnershipOfVcpuState Indicate the L1 is taking
+ over ownership of the VCPU state and that the L0 can free
+ the storage holding the state. The VCPU state will need to
+ be returned to the Hypervisor via H_GUEST_SET_STATE prior
+ to H_GUEST_RUN_VCPU being called for this VCPU. The data
+ returned in the dataBuffer is in a Hypervisor internal
+ format.
+ Bits 2-63: Reserved
+ guestId: ID obtained from H_GUEST_CREATE
+ vcpuId: ID of the vCPU pass to H_GUEST_CREATE_VCPU
+ dataBuffer: A L1 real address of the GSB.
+ If takeOwnershipOfVcpuState, size must be at least the size
+ returned by ID=0x0001
+ dataBufferSizeInBytes: Size of dataBuffer
+ Output:
+ R3: Return code
+ R4: If R3 = H_Invalid_Element_Id: The array index of the bad
+ element ID.
+ If R3 = H_Invalid_Element_Size: The array index of the bad
+ element size.
+ If R3 = H_Invalid_Element_Value: The array index of the bad
+ element value.
+
+H_GUEST_SET_STATE()
+-------------------
+
+This is called to set L2 wide or vCPU specific L2 state. This info is
+passed via the Guest State Buffer (GSB), necessary details below:
+
+This can set either L2 wide or vcpu specific information. Examples of
+L2 wide is the timebase offset or process scoped page table
+info. Examples of vCPU specific are GPRs or VSRs. A bit in the flags
+parameter specifies if this call is L2 wide or vCPU specific and the
+IDs in the GSB must match this.
+
+The L1 provides a pointer to the GSB as a parameter to this call. Also
+provided is the L2 and vCPU IDs associated with the state to set.
+
+The L1 writes all values in the GSB and the L0 only reads the GSB for
+this call::
+
+ H_GUEST_SET_STATE(uint64 flags,
+ uint64 guestId,
+ uint64 vcpuId,
+ uint64 dataBuffer,
+ uint64 dataBufferSizeInBytes);
+ Parameters:
+ Input:
+ flags:
+ Bit 0: getGuestWideState: Request state of the Guest instead
+ of an individual VCPU.
+ Bit 1: returnOwnershipOfVcpuState Return Guest VCPU state. See
+ GET_STATE takeOwnershipOfVcpuState
+ Bits 2-63: Reserved
+ guestId: ID obtained from H_GUEST_CREATE
+ vcpuId: ID of the vCPU pass to H_GUEST_CREATE_VCPU
+ dataBuffer: A L1 real address of the GSB.
+ If takeOwnershipOfVcpuState, size must be at least the size
+ returned by ID=0x0001
+ dataBufferSizeInBytes: Size of dataBuffer
+ Output:
+ R3: Return code
+ R4: If R3 = H_Invalid_Element_Id: The array index of the bad
+ element ID.
+ If R3 = H_Invalid_Element_Size: The array index of the bad
+ element size.
+ If R3 = H_Invalid_Element_Value: The array index of the bad
+ element value.
+
+H_GUEST_RUN_VCPU()
+------------------
+
+This is called to run an L2 vCPU. The L2 and vCPU IDs are passed in as
+parameters. The vCPU runs with the state set previously using
+H_GUEST_SET_STATE(). When the L2 exits, the L1 will resume from this
+hcall.
+
+This hcall also has associated input and output GSBs. Unlike
+H_GUEST_{S,G}ET_STATE(), these GSB pointers are not passed in as
+parameters to the hcall (This was done in the interest of
+performance). The locations of these GSBs must be preregistered using
+the H_GUEST_SET_STATE() call with ID 0x0c00 and 0x0c01 (see table
+below).
+
+The input GSB may contain only VCPU specific elements to be set. This
+GSB may also contain zero elements (ie 0 in the first 4 bytes of the
+GSB) if nothing needs to be set.
+
+On exit from the hcall, the output buffer is filled with elements
+determined by the L0. The reason for the exit is contained in GPR4 (ie
+NIP is put in GPR4). The elements returned depend on the exit
+type. For example, if the exit reason is the L2 doing a hcall (GPR4 =
+0xc00), then GPR3-12 are provided in the output GSB as this is the
+state likely needed to service the hcall. If additional state is
+needed, H_GUEST_GET_STATE() may be called by the L1.
+
+To synthesize interrupts in the L2, when calling H_GUEST_RUN_VCPU()
+the L1 may set a flag (as a hcall parameter) and the L0 will
+synthesize the interrupt in the L2. Alternatively, the L1 may
+synthesize the interrupt itself using H_GUEST_SET_STATE() or the
+H_GUEST_RUN_VCPU() input GSB to set the state appropriately::
+
+ H_GUEST_RUN_VCPU(uint64 flags,
+ uint64 guestId,
+ uint64 vcpuId,
+ uint64 dataBuffer,
+ uint64 dataBufferSizeInBytes);
+ Parameters:
+ Input:
+ flags:
+ Bit 0: generateExternalInterrupt: Generate an external interrupt
+ Bit 1: generatePrivilegedDoorbell: Generate a Privileged Doorbell
+ Bit 2: sendToSystemReset”: Generate a System Reset Interrupt
+ Bits 3-63: Reserved
+ guestId: ID obtained from H_GUEST_CREATE
+ vcpuId: ID of the vCPU pass to H_GUEST_CREATE_VCPU
+ Output:
+ R3: Return code
+ R4: If R3 = H_Success: The reason L1 VCPU exited (ie. NIA)
+ 0x000: The VCPU stopped running for an unspecified reason. An
+ example of this is the Hypervisor stopping a VCPU running
+ due to an outstanding interrupt for the Host Partition.
+ 0x980: HDEC
+ 0xC00: HCALL
+ 0xE00: HDSI
+ 0xE20: HISI
+ 0xE40: HEA
+ 0xF80: HV Fac Unavail
+ If R3 = H_Invalid_Element_Id, H_Invalid_Element_Size, or
+ H_Invalid_Element_Value: R4 is offset of the invalid element
+ in the input buffer.
+
+H_GUEST_DELETE()
+----------------
+
+This is called to delete an L2. All associated vCPUs are also
+deleted. No specific vCPU delete call is provided.
+
+A flag may be provided to delete all guests. This is used to reset the
+L0 in the case of kdump/kexec::
+
+ H_GUEST_DELETE(uint64 flags,
+ uint64 guestId)
+ Parameters:
+ Input:
+ flags:
+ Bit 0: deleteAllGuests: deletes all guests
+ Bits 1-63: Reserved
+ guestId: ID obtained from H_GUEST_CREATE
+ Output:
+ R3: Return code
+
+Guest State Buffer
+==================
+
+The Guest State Buffer (GSB) is the main method of communicating state
+about the L2 between the L1 and L0 via H_GUEST_{G,S}ET() and
+H_GUEST_VCPU_RUN() calls.
+
+State may be associated with a whole L2 (eg timebase offset) or a
+specific L2 vCPU (eg. GPR state). Only L2 VCPU state maybe be set by
+H_GUEST_VCPU_RUN().
+
+All data in the GSB is big endian (as is standard in PAPR)
+
+The Guest state buffer has a header which gives the number of
+elements, followed by the GSB elements themselves.
+
+GSB header:
+
++----------+----------+-------------------------------------------+
+| Offset | Size | Purpose |
+| Bytes | Bytes | |
++==========+==========+===========================================+
+| 0 | 4 | Number of elements |
++----------+----------+-------------------------------------------+
+| 4 | | Guest state buffer elements |
++----------+----------+-------------------------------------------+
+
+GSB element:
+
++----------+----------+-------------------------------------------+
+| Offset | Size | Purpose |
+| Bytes | Bytes | |
++==========+==========+===========================================+
+| 0 | 2 | ID |
++----------+----------+-------------------------------------------+
+| 2 | 2 | Size of Value |
++----------+----------+-------------------------------------------+
+| 4 | As above | Value |
++----------+----------+-------------------------------------------+
+
+The ID in the GSB element specifies what is to be set. This includes
+archtected state like GPRs, VSRs, SPRs, plus also some meta data about
+the partition like the timebase offset and partition scoped page
+table information.
+
++--------+-------+----+--------+----------------------------------+
+| ID | Size | RW | Thread | Details |
+| | Bytes | | Guest | |
+| | | | Scope | |
++========+=======+====+========+==================================+
+| 0x0000 | | RW | TG | NOP element |
++--------+-------+----+--------+----------------------------------+
+| 0x0001 | 0x08 | R | G | Size of L0 vCPU state. See: |
+| | | | | H_GUEST_GET_STATE: |
+| | | | | flags = takeOwnershipOfVcpuState |
++--------+-------+----+--------+----------------------------------+
+| 0x0002 | 0x08 | R | G | Size Run vCPU out buffer |
++--------+-------+----+--------+----------------------------------+
+| 0x0003 | 0x04 | RW | G | Logical PVR |
++--------+-------+----+--------+----------------------------------+
+| 0x0004 | 0x08 | RW | G | TB Offset (L1 relative) |
++--------+-------+----+--------+----------------------------------+
+| 0x0005 | 0x18 | RW | G |Partition scoped page tbl info: |
+| | | | | |
+| | | | |- 0x00 Addr part scope table |
+| | | | |- 0x08 Num addr bits |
+| | | | |- 0x10 Size root dir |
++--------+-------+----+--------+----------------------------------+
+| 0x0006 | 0x10 | RW | G |Process Table Information: |
+| | | | | |
+| | | | |- 0x0 Addr proc scope table |
+| | | | |- 0x8 Table size. |
++--------+-------+----+--------+----------------------------------+
+| 0x0007-| | | | Reserved |
+| 0x0BFF | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x0C00 | 0x10 | RW | T |Run vCPU Input Buffer: |
+| | | | | |
+| | | | |- 0x0 Addr of buffer |
+| | | | |- 0x8 Buffer Size. |
++--------+-------+----+--------+----------------------------------+
+| 0x0C01 | 0x10 | RW | T |Run vCPU Output Buffer: |
+| | | | | |
+| | | | |- 0x0 Addr of buffer |
+| | | | |- 0x8 Buffer Size. |
++--------+-------+----+--------+----------------------------------+
+| 0x0C02 | 0x08 | RW | T | vCPU VPA Address |
++--------+-------+----+--------+----------------------------------+
+| 0x0C03-| | | | Reserved |
+| 0x0FFF | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x1000-| 0x08 | RW | T | GPR 0-31 |
+| 0x101F | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x1020 | 0x08 | T | T | HDEC expiry TB |
++--------+-------+----+--------+----------------------------------+
+| 0x1021 | 0x08 | RW | T | NIA |
++--------+-------+----+--------+----------------------------------+
+| 0x1022 | 0x08 | RW | T | MSR |
++--------+-------+----+--------+----------------------------------+
+| 0x1023 | 0x08 | RW | T | LR |
++--------+-------+----+--------+----------------------------------+
+| 0x1024 | 0x08 | RW | T | XER |
++--------+-------+----+--------+----------------------------------+
+| 0x1025 | 0x08 | RW | T | CTR |
++--------+-------+----+--------+----------------------------------+
+| 0x1026 | 0x08 | RW | T | CFAR |
++--------+-------+----+--------+----------------------------------+
+| 0x1027 | 0x08 | RW | T | SRR0 |
++--------+-------+----+--------+----------------------------------+
+| 0x1028 | 0x08 | RW | T | SRR1 |
++--------+-------+----+--------+----------------------------------+
+| 0x1029 | 0x08 | RW | T | DAR |
++--------+-------+----+--------+----------------------------------+
+| 0x102A | 0x08 | RW | T | DEC expiry TB |
++--------+-------+----+--------+----------------------------------+
+| 0x102B | 0x08 | RW | T | VTB |
++--------+-------+----+--------+----------------------------------+
+| 0x102C | 0x08 | RW | T | LPCR |
++--------+-------+----+--------+----------------------------------+
+| 0x102D | 0x08 | RW | T | HFSCR |
++--------+-------+----+--------+----------------------------------+
+| 0x102E | 0x08 | RW | T | FSCR |
++--------+-------+----+--------+----------------------------------+
+| 0x102F | 0x08 | RW | T | FPSCR |
++--------+-------+----+--------+----------------------------------+
+| 0x1030 | 0x08 | RW | T | DAWR0 |
++--------+-------+----+--------+----------------------------------+
+| 0x1031 | 0x08 | RW | T | DAWR1 |
++--------+-------+----+--------+----------------------------------+
+| 0x1032 | 0x08 | RW | T | CIABR |
++--------+-------+----+--------+----------------------------------+
+| 0x1033 | 0x08 | RW | T | PURR |
++--------+-------+----+--------+----------------------------------+
+| 0x1034 | 0x08 | RW | T | SPURR |
++--------+-------+----+--------+----------------------------------+
+| 0x1035 | 0x08 | RW | T | IC |
++--------+-------+----+--------+----------------------------------+
+| 0x1036-| 0x08 | RW | T | SPRG 0-3 |
+| 0x1039 | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x103A | 0x08 | W | T | PPR |
++--------+-------+----+--------+----------------------------------+
+| 0x103B | 0x08 | RW | T | MMCR 0-3 |
+| 0x103E | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x103F | 0x08 | RW | T | MMCRA |
++--------+-------+----+--------+----------------------------------+
+| 0x1040 | 0x08 | RW | T | SIER |
++--------+-------+----+--------+----------------------------------+
+| 0x1041 | 0x08 | RW | T | SIER 2 |
++--------+-------+----+--------+----------------------------------+
+| 0x1042 | 0x08 | RW | T | SIER 3 |
++--------+-------+----+--------+----------------------------------+
+| 0x1043 | 0x08 | RW | T | BESCR |
++--------+-------+----+--------+----------------------------------+
+| 0x1044 | 0x08 | RW | T | EBBHR |
++--------+-------+----+--------+----------------------------------+
+| 0x1045 | 0x08 | RW | T | EBBRR |
++--------+-------+----+--------+----------------------------------+
+| 0x1046 | 0x08 | RW | T | AMR |
++--------+-------+----+--------+----------------------------------+
+| 0x1047 | 0x08 | RW | T | IAMR |
++--------+-------+----+--------+----------------------------------+
+| 0x1048 | 0x08 | RW | T | AMOR |
++--------+-------+----+--------+----------------------------------+
+| 0x1049 | 0x08 | RW | T | UAMOR |
++--------+-------+----+--------+----------------------------------+
+| 0x104A | 0x08 | RW | T | SDAR |
++--------+-------+----+--------+----------------------------------+
+| 0x104B | 0x08 | RW | T | SIAR |
++--------+-------+----+--------+----------------------------------+
+| 0x104C | 0x08 | RW | T | DSCR |
++--------+-------+----+--------+----------------------------------+
+| 0x104D | 0x08 | RW | T | TAR |
++--------+-------+----+--------+----------------------------------+
+| 0x104E | 0x08 | RW | T | DEXCR |
++--------+-------+----+--------+----------------------------------+
+| 0x104F | 0x08 | RW | T | HDEXCR |
++--------+-------+----+--------+----------------------------------+
+| 0x1050 | 0x08 | RW | T | HASHKEYR |
++--------+-------+----+--------+----------------------------------+
+| 0x1051 | 0x08 | RW | T | HASHPKEYR |
++--------+-------+----+--------+----------------------------------+
+| 0x1052 | 0x08 | RW | T | CTRL |
++--------+-------+----+--------+----------------------------------+
+| 0x1053-| | | | Reserved |
+| 0x1FFF | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x2000 | 0x04 | RW | T | CR |
++--------+-------+----+--------+----------------------------------+
+| 0x2001 | 0x04 | RW | T | PIDR |
++--------+-------+----+--------+----------------------------------+
+| 0x2002 | 0x04 | RW | T | DSISR |
++--------+-------+----+--------+----------------------------------+
+| 0x2003 | 0x04 | RW | T | VSCR |
++--------+-------+----+--------+----------------------------------+
+| 0x2004 | 0x04 | RW | T | VRSAVE |
++--------+-------+----+--------+----------------------------------+
+| 0x2005 | 0x04 | RW | T | DAWRX0 |
++--------+-------+----+--------+----------------------------------+
+| 0x2006 | 0x04 | RW | T | DAWRX1 |
++--------+-------+----+--------+----------------------------------+
+| 0x2007-| 0x04 | RW | T | PMC 1-6 |
+| 0x200c | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x200D | 0x04 | RW | T | WORT |
++--------+-------+----+--------+----------------------------------+
+| 0x200E | 0x04 | RW | T | PSPB |
++--------+-------+----+--------+----------------------------------+
+| 0x200F-| | | | Reserved |
+| 0x2FFF | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x3000-| 0x10 | RW | T | VSR 0-63 |
+| 0x303F | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0x3040-| | | | Reserved |
+| 0xEFFF | | | | |
++--------+-------+----+--------+----------------------------------+
+| 0xF000 | 0x08 | R | T | HDAR |
++--------+-------+----+--------+----------------------------------+
+| 0xF001 | 0x04 | R | T | HDSISR |
++--------+-------+----+--------+----------------------------------+
+| 0xF002 | 0x04 | R | T | HEIR |
++--------+-------+----+--------+----------------------------------+
+| 0xF003 | 0x08 | R | T | ASDR |
++--------+-------+----+--------+----------------------------------+
+
+
+Miscellaneous info
+==================
+
+State not in ptregs/hvregs
+--------------------------
+
+In the v1 API, some state is not in the ptregs/hvstate. This includes
+the vector register and some SPRs. For the L1 to set this state for
+the L2, the L1 loads up these hardware registers before the
+h_enter_nested() call and the L0 ensures they end up as the L2 state
+(by not touching them).
+
+The v2 API removes this and explicitly sets this state via the GSB.
+
+L1 Implementation details: Caching state
+----------------------------------------
+
+In the v1 API, all state is sent from the L1 to the L0 and vice versa
+on every h_enter_nested() hcall. If the L0 is not currently running
+any L2s, the L0 has no state information about them. The only
+exception to this is the location of the partition table, registered
+via h_set_partition_table().
+
+The v2 API changes this so that the L0 retains the L2 state even when
+it's vCPUs are no longer running. This means that the L1 only needs to
+communicate with the L0 about L2 state when it needs to modify the L2
+state, or when it's value is out of date. This provides an opportunity
+for performance optimisation.
+
+When a vCPU exits from a H_GUEST_RUN_VCPU() call, the L1 internally
+marks all L2 state as invalid. This means that if the L1 wants to know
+the L2 state (say via a kvm_get_one_reg() call), it needs call
+H_GUEST_GET_STATE() to get that state. Once it's read, it's marked as
+valid in L1 until the L2 is run again.
+
+Also, when an L1 modifies L2 vcpu state, it doesn't need to write it
+to the L0 until that L2 vcpu runs again. Hence when the L1 updates
+state (say via a kvm_set_one_reg() call), it writes to an internal L1
+copy and only flushes this copy to the L0 when the L2 runs again via
+the H_GUEST_VCPU_RUN() input buffer.
+
+This lazy updating of state by the L1 avoids unnecessary
+H_GUEST_{G|S}ET_STATE() calls.
diff --git a/Documentation/arch/powerpc/mpc52xx.rst b/Documentation/arch/powerpc/mpc52xx.rst
new file mode 100644
index 0000000000..5243b1763f
--- /dev/null
+++ b/Documentation/arch/powerpc/mpc52xx.rst
@@ -0,0 +1,43 @@
+=============================
+Linux 2.6.x on MPC52xx family
+=============================
+
+For the latest info, go to https://www.246tNt.com/mpc52xx/
+
+To compile/use :
+
+ - U-Boot::
+
+ # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
+ if you wish to ).
+ # make lite5200_defconfig
+ # make uImage
+
+ then, on U-boot:
+ => tftpboot 200000 uImage
+ => tftpboot 400000 pRamdisk
+ => bootm 200000 400000
+
+ - DBug::
+
+ # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
+ if you wish to ).
+ # make lite5200_defconfig
+ # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
+ # make zImage.initrd
+ # make
+
+ then in DBug:
+ DBug> dn -i zImage.initrd.lite5200
+
+
+Some remarks:
+
+ - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
+ is not supported, and I'm not sure anyone is interested in working on it
+ so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
+ nothing to do with the MPC5200. I also included the 'MPC' for the same
+ reason.
+ - Of course, I inspired myself from the 2.4 port. If you think I forgot to
+ mention you/your company in the copyright of some code, I'll correct it
+ ASAP.
diff --git a/Documentation/arch/powerpc/papr_hcalls.rst b/Documentation/arch/powerpc/papr_hcalls.rst
new file mode 100644
index 0000000000..80d2c0aada
--- /dev/null
+++ b/Documentation/arch/powerpc/papr_hcalls.rst
@@ -0,0 +1,302 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+Hypercall Op-codes (hcalls)
+===========================
+
+Overview
+=========
+
+Virtualization on 64-bit Power Book3S Platforms is based on the PAPR
+specification [1]_ which describes the run-time environment for a guest
+operating system and how it should interact with the hypervisor for
+privileged operations. Currently there are two PAPR compliant hypervisors:
+
+- **IBM PowerVM (PHYP)**: IBM's proprietary hypervisor that supports AIX,
+ IBM-i and Linux as supported guests (termed as Logical Partitions
+ or LPARS). It supports the full PAPR specification.
+
+- **Qemu/KVM**: Supports PPC64 linux guests running on a PPC64 linux host.
+ Though it only implements a subset of PAPR specification called LoPAPR [2]_.
+
+On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
+a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
+issue hypercalls to the hypervisor whenever it needs to perform an action
+that is hypervisor privileged [3]_ or for other services managed by the
+hypervisor.
+
+Hence a Hypercall (hcall) is essentially a request by the pseries guest
+asking hypervisor to perform a privileged operation on behalf of the guest. The
+guest issues a with necessary input operands. The hypervisor after performing
+the privilege operation returns a status code and output operands back to the
+guest.
+
+HCALL ABI
+=========
+The ABI specification for a hcall between a pseries guest and PAPR hypervisor
+is covered in section 14.5.3 of ref [2]_. Switch to the Hypervisor context is
+done via the instruction **HVCS** that expects the Opcode for hcall is set in *r3*
+and any in-arguments for the hcall are provided in registers *r4-r12*. If values
+have to be passed through a memory buffer, the data stored in that buffer should be
+in Big-endian byte order.
+
+Once control returns back to the guest after hypervisor has serviced the
+'HVCS' instruction the return value of the hcall is available in *r3* and any
+out values are returned in registers *r4-r12*. Again like in case of in-arguments,
+any out values stored in a memory buffer will be in Big-endian byte order.
+
+Powerpc arch code provides convenient wrappers named **plpar_hcall_xxx** defined
+in a arch specific header [4]_ to issue hcalls from the linux kernel
+running as pseries guest.
+
+Register Conventions
+====================
+
+Any hcall should follow same register convention as described in section 2.2.1.1
+of "64-Bit ELF V2 ABI Specification: Power Architecture"[5]_. Table below
+summarizes these conventions:
+
++----------+----------+-------------------------------------------+
+| Register |Volatile | Purpose |
+| Range |(Y/N) | |
++==========+==========+===========================================+
+| r0 | Y | Optional-usage |
++----------+----------+-------------------------------------------+
+| r1 | N | Stack Pointer |
++----------+----------+-------------------------------------------+
+| r2 | N | TOC |
++----------+----------+-------------------------------------------+
+| r3 | Y | hcall opcode/return value |
++----------+----------+-------------------------------------------+
+| r4-r10 | Y | in and out values |
++----------+----------+-------------------------------------------+
+| r11 | Y | Optional-usage/Environmental pointer |
++----------+----------+-------------------------------------------+
+| r12 | Y | Optional-usage/Function entry address at |
+| | | global entry point |
++----------+----------+-------------------------------------------+
+| r13 | N | Thread-Pointer |
++----------+----------+-------------------------------------------+
+| r14-r31 | N | Local Variables |
++----------+----------+-------------------------------------------+
+| LR | Y | Link Register |
++----------+----------+-------------------------------------------+
+| CTR | Y | Loop Counter |
++----------+----------+-------------------------------------------+
+| XER | Y | Fixed-point exception register. |
++----------+----------+-------------------------------------------+
+| CR0-1 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR2-4 | N | Condition register fields. |
++----------+----------+-------------------------------------------+
+| CR5-7 | Y | Condition register fields. |
++----------+----------+-------------------------------------------+
+| Others | N | |
++----------+----------+-------------------------------------------+
+
+DRC & DRC Indexes
+=================
+::
+
+ DR1 Guest
+ +--+ +------------+ +---------+
+ | | <----> | | | User |
+ +--+ DRC1 | | DRC | Space |
+ | PAPR | Index +---------+
+ DR2 | Hypervisor | | |
+ +--+ | | <-----> | Kernel |
+ | | <----> | | Hcall | |
+ +--+ DRC2 +------------+ +---------+
+
+PAPR hypervisor terms shared hardware resources like PCI devices, NVDIMMs etc
+available for use by LPARs as Dynamic Resource (DR). When a DR is allocated to
+an LPAR, PHYP creates a data-structure called Dynamic Resource Connector (DRC)
+to manage LPAR access. An LPAR refers to a DRC via an opaque 32-bit number
+called DRC-Index. The DRC-index value is provided to the LPAR via device-tree
+where its present as an attribute in the device tree node associated with the
+DR.
+
+HCALL Return-values
+===================
+
+After servicing the hcall, hypervisor sets the return-value in *r3* indicating
+success or failure of the hcall. In case of a failure an error code indicates
+the cause for error. These codes are defined and documented in arch specific
+header [4]_.
+
+In some cases a hcall can potentially take a long time and need to be issued
+multiple times in order to be completely serviced. These hcalls will usually
+accept an opaque value *continue-token* within there argument list and a
+return value of *H_CONTINUE* indicates that hypervisor hasn't still finished
+servicing the hcall yet.
+
+To make such hcalls the guest need to set *continue-token == 0* for the
+initial call and use the hypervisor returned value of *continue-token*
+for each subsequent hcall until hypervisor returns a non *H_CONTINUE*
+return value.
+
+HCALL Op-codes
+==============
+
+Below is a partial list of HCALLs that are supported by PHYP. For the
+corresponding opcode values please look into the arch specific header [4]_:
+
+**H_SCM_READ_METADATA**
+
+| Input: *drcIndex, offset, buffer-address, numBytesToRead*
+| Out: *numBytesRead*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_Hardware*
+
+Given a DRC Index of an NVDIMM, read N-bytes from the metadata area
+associated with it, at a specified offset and copy it to provided buffer.
+The metadata area stores configuration information such as label information,
+bad-blocks etc. The metadata area is located out-of-band of NVDIMM storage
+area hence a separate access semantics is provided.
+
+**H_SCM_WRITE_METADATA**
+
+| Input: *drcIndex, offset, data, numBytesToWrite*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P4, H_Hardware*
+
+Given a DRC Index of an NVDIMM, write N-bytes to the metadata area
+associated with it, at the specified offset and from the provided buffer.
+
+**H_SCM_BIND_MEM**
+
+| Input: *drcIndex, startingScmBlockIndex, numScmBlocksToBind,*
+| *targetLogicalMemoryAddress, continue-token*
+| Out: *continue-token, targetLogicalMemoryAddress, numScmBlocksToBound*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_P4, H_Overlap,*
+| *H_Too_Big, H_P5, H_Busy*
+
+Given a DRC-Index of an NVDIMM, map a continuous SCM blocks range
+*(startingScmBlockIndex, startingScmBlockIndex+numScmBlocksToBind)* to the guest
+at *targetLogicalMemoryAddress* within guest physical address space. In
+case *targetLogicalMemoryAddress == 0xFFFFFFFF_FFFFFFFF* then hypervisor
+assigns a target address to the guest. The HCALL can fail if the Guest has
+an active PTE entry to the SCM block being bound.
+
+**H_SCM_UNBIND_MEM**
+| Input: drcIndex, startingScmLogicalMemoryAddress, numScmBlocksToUnbind
+| Out: numScmBlocksUnbound
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Overlap,*
+| *H_Busy, H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Given a DRC-Index of an NVDimm, unmap *numScmBlocksToUnbind* SCM blocks starting
+at *startingScmLogicalMemoryAddress* from guest physical address space. The
+HCALL can fail if the Guest has an active PTE entry to the SCM block being
+unbound.
+
+**H_SCM_QUERY_BLOCK_MEM_BINDING**
+
+| Input: *drcIndex, scmBlockIndex*
+| Out: *Guest-Physical-Address*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a DRC-Index and an SCM Block index return the guest physical address to
+which the SCM block is mapped to.
+
+**H_SCM_QUERY_LOGICAL_MEM_BINDING**
+
+| Input: *Guest-Physical-Address*
+| Out: *drcIndex, scmBlockIndex*
+| Return Value: *H_Success, H_Parameter, H_P2, H_NotFound*
+
+Given a guest physical address return which DRC Index and SCM block is mapped
+to that address.
+
+**H_SCM_UNBIND_ALL**
+
+| Input: *scmTargetScope, drcIndex*
+| Out: *None*
+| Return Value: *H_Success, H_Parameter, H_P2, H_P3, H_In_Use, H_Busy,*
+| *H_LongBusyOrder1mSec, H_LongBusyOrder10mSec*
+
+Depending on the Target scope unmap all SCM blocks belonging to all NVDIMMs
+or all SCM blocks belonging to a single NVDIMM identified by its drcIndex
+from the LPAR memory.
+
+**H_SCM_HEALTH**
+
+| Input: drcIndex
+| Out: *health-bitmap (r4), health-bit-valid-bitmap (r5)*
+| Return Value: *H_Success, H_Parameter, H_Hardware*
+
+Given a DRC Index return the info on predictive failure and overall health of
+the PMEM device. The asserted bits in the health-bitmap indicate one or more states
+(described in table below) of the PMEM device and health-bit-valid-bitmap indicate
+which bits in health-bitmap are valid. The bits are reported in
+reverse bit ordering for example a value of 0xC400000000000000
+indicates bits 0, 1, and 5 are valid.
+
+Health Bitmap Flags:
+
++------+-----------------------------------------------------------------------+
+| Bit | Definition |
++======+=======================================================================+
+| 00 | PMEM device is unable to persist memory contents. |
+| | If the system is powered down, nothing will be saved. |
++------+-----------------------------------------------------------------------+
+| 01 | PMEM device failed to persist memory contents. Either contents were |
+| | not saved successfully on power down or were not restored properly on |
+| | power up. |
++------+-----------------------------------------------------------------------+
+| 02 | PMEM device contents are persisted from previous IPL. The data from |
+| | the last boot were successfully restored. |
++------+-----------------------------------------------------------------------+
+| 03 | PMEM device contents are not persisted from previous IPL. There was no|
+| | data to restore from the last boot. |
++------+-----------------------------------------------------------------------+
+| 04 | PMEM device memory life remaining is critically low |
++------+-----------------------------------------------------------------------+
+| 05 | PMEM device will be garded off next IPL due to failure |
++------+-----------------------------------------------------------------------+
+| 06 | PMEM device contents cannot persist due to current platform health |
+| | status. A hardware failure may prevent data from being saved or |
+| | restored. |
++------+-----------------------------------------------------------------------+
+| 07 | PMEM device is unable to persist memory contents in certain conditions|
++------+-----------------------------------------------------------------------+
+| 08 | PMEM device is encrypted |
++------+-----------------------------------------------------------------------+
+| 09 | PMEM device has successfully completed a requested erase or secure |
+| | erase procedure. |
++------+-----------------------------------------------------------------------+
+|10:63 | Reserved / Unused |
++------+-----------------------------------------------------------------------+
+
+**H_SCM_PERFORMANCE_STATS**
+
+| Input: drcIndex, resultBuffer Addr
+| Out: None
+| Return Value: *H_Success, H_Parameter, H_Unsupported, H_Hardware, H_Authority, H_Privilege*
+
+Given a DRC Index collect the performance statistics for NVDIMM and copy them
+to the resultBuffer.
+
+**H_SCM_FLUSH**
+
+| Input: *drcIndex, continue-token*
+| Out: *continue-token*
+| Return Value: *H_SUCCESS, H_Parameter, H_P2, H_BUSY*
+
+Given a DRC Index Flush the data to backend NVDIMM device.
+
+The hcall returns H_BUSY when the flush takes longer time and the hcall needs
+to be issued multiple times in order to be completely serviced. The
+*continue-token* from the output to be passed in the argument list of
+subsequent hcalls to the hypervisor until the hcall is completely serviced
+at which point H_SUCCESS or other error is returned by the hypervisor.
+
+References
+==========
+.. [1] "Power Architecture Platform Reference"
+ https://en.wikipedia.org/wiki/Power_Architecture_Platform_Reference
+.. [2] "Linux on Power Architecture Platform Reference"
+ https://members.openpowerfoundation.org/document/dl/469
+.. [3] "Definitions and Notation" Book III-Section 14.5.3
+ https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+.. [4] arch/powerpc/include/asm/hvcall.h
+.. [5] "64-Bit ELF V2 ABI Specification: Power Architecture"
+ https://openpowerfoundation.org/?resource_lib=64-bit-elf-v2-abi-specification-power-architecture
diff --git a/Documentation/arch/powerpc/pci_iov_resource_on_powernv.rst b/Documentation/arch/powerpc/pci_iov_resource_on_powernv.rst
new file mode 100644
index 0000000000..f5a5793e16
--- /dev/null
+++ b/Documentation/arch/powerpc/pci_iov_resource_on_powernv.rst
@@ -0,0 +1,312 @@
+===================================================
+PCI Express I/O Virtualization Resource on Powerenv
+===================================================
+
+Wei Yang <weiyang@linux.vnet.ibm.com>
+
+Benjamin Herrenschmidt <benh@au1.ibm.com>
+
+Bjorn Helgaas <bhelgaas@google.com>
+
+26 Aug 2014
+
+This document describes the requirement from hardware for PCI MMIO resource
+sizing and assignment on PowerKVM and how generic PCI code handles this
+requirement. The first two sections describe the concepts of Partitionable
+Endpoints and the implementation on P8 (IODA2). The next two sections talks
+about considerations on enabling SRIOV on IODA2.
+
+1. Introduction to Partitionable Endpoints
+==========================================
+
+A Partitionable Endpoint (PE) is a way to group the various resources
+associated with a device or a set of devices to provide isolation between
+partitions (i.e., filtering of DMA, MSIs etc.) and to provide a mechanism
+to freeze a device that is causing errors in order to limit the possibility
+of propagation of bad data.
+
+There is thus, in HW, a table of PE states that contains a pair of "frozen"
+state bits (one for MMIO and one for DMA, they get set together but can be
+cleared independently) for each PE.
+
+When a PE is frozen, all stores in any direction are dropped and all loads
+return all 1's value. MSIs are also blocked. There's a bit more state that
+captures things like the details of the error that caused the freeze etc., but
+that's not critical.
+
+The interesting part is how the various PCIe transactions (MMIO, DMA, ...)
+are matched to their corresponding PEs.
+
+The following section provides a rough description of what we have on P8
+(IODA2). Keep in mind that this is all per PHB (PCI host bridge). Each PHB
+is a completely separate HW entity that replicates the entire logic, so has
+its own set of PEs, etc.
+
+2. Implementation of Partitionable Endpoints on P8 (IODA2)
+==========================================================
+
+P8 supports up to 256 Partitionable Endpoints per PHB.
+
+ * Inbound
+
+ For DMA, MSIs and inbound PCIe error messages, we have a table (in
+ memory but accessed in HW by the chip) that provides a direct
+ correspondence between a PCIe RID (bus/dev/fn) with a PE number.
+ We call this the RTT.
+
+ - For DMA we then provide an entire address space for each PE that can
+ contain two "windows", depending on the value of PCI address bit 59.
+ Each window can be configured to be remapped via a "TCE table" (IOMMU
+ translation table), which has various configurable characteristics
+ not described here.
+
+ - For MSIs, we have two windows in the address space (one at the top of
+ the 32-bit space and one much higher) which, via a combination of the
+ address and MSI value, will result in one of the 2048 interrupts per
+ bridge being triggered. There's a PE# in the interrupt controller
+ descriptor table as well which is compared with the PE# obtained from
+ the RTT to "authorize" the device to emit that specific interrupt.
+
+ - Error messages just use the RTT.
+
+ * Outbound. That's where the tricky part is.
+
+ Like other PCI host bridges, the Power8 IODA2 PHB supports "windows"
+ from the CPU address space to the PCI address space. There is one M32
+ window and sixteen M64 windows. They have different characteristics.
+ First what they have in common: they forward a configurable portion of
+ the CPU address space to the PCIe bus and must be naturally aligned
+ power of two in size. The rest is different:
+
+ - The M32 window:
+
+ * Is limited to 4GB in size.
+
+ * Drops the top bits of the address (above the size) and replaces
+ them with a configurable value. This is typically used to generate
+ 32-bit PCIe accesses. We configure that window at boot from FW and
+ don't touch it from Linux; it's usually set to forward a 2GB
+ portion of address space from the CPU to PCIe
+ 0x8000_0000..0xffff_ffff. (Note: The top 64KB are actually
+ reserved for MSIs but this is not a problem at this point; we just
+ need to ensure Linux doesn't assign anything there, the M32 logic
+ ignores that however and will forward in that space if we try).
+
+ * It is divided into 256 segments of equal size. A table in the chip
+ maps each segment to a PE#. That allows portions of the MMIO space
+ to be assigned to PEs on a segment granularity. For a 2GB window,
+ the segment granularity is 2GB/256 = 8MB.
+
+ Now, this is the "main" window we use in Linux today (excluding
+ SR-IOV). We basically use the trick of forcing the bridge MMIO windows
+ onto a segment alignment/granularity so that the space behind a bridge
+ can be assigned to a PE.
+
+ Ideally we would like to be able to have individual functions in PEs
+ but that would mean using a completely different address allocation
+ scheme where individual function BARs can be "grouped" to fit in one or
+ more segments.
+
+ - The M64 windows:
+
+ * Must be at least 256MB in size.
+
+ * Do not translate addresses (the address on PCIe is the same as the
+ address on the PowerBus). There is a way to also set the top 14
+ bits which are not conveyed by PowerBus but we don't use this.
+
+ * Can be configured to be segmented. When not segmented, we can
+ specify the PE# for the entire window. When segmented, a window
+ has 256 segments; however, there is no table for mapping a segment
+ to a PE#. The segment number *is* the PE#.
+
+ * Support overlaps. If an address is covered by multiple windows,
+ there's a defined ordering for which window applies.
+
+ We have code (fairly new compared to the M32 stuff) that exploits that
+ for large BARs in 64-bit space:
+
+ We configure an M64 window to cover the entire region of address space
+ that has been assigned by FW for the PHB (about 64GB, ignore the space
+ for the M32, it comes out of a different "reserve"). We configure it
+ as segmented.
+
+ Then we do the same thing as with M32, using the bridge alignment
+ trick, to match to those giant segments.
+
+ Since we cannot remap, we have two additional constraints:
+
+ - We do the PE# allocation *after* the 64-bit space has been assigned
+ because the addresses we use directly determine the PE#. We then
+ update the M32 PE# for the devices that use both 32-bit and 64-bit
+ spaces or assign the remaining PE# to 32-bit only devices.
+
+ - We cannot "group" segments in HW, so if a device ends up using more
+ than one segment, we end up with more than one PE#. There is a HW
+ mechanism to make the freeze state cascade to "companion" PEs but
+ that only works for PCIe error messages (typically used so that if
+ you freeze a switch, it freezes all its children). So we do it in
+ SW. We lose a bit of effectiveness of EEH in that case, but that's
+ the best we found. So when any of the PEs freezes, we freeze the
+ other ones for that "domain". We thus introduce the concept of
+ "master PE" which is the one used for DMA, MSIs, etc., and "secondary
+ PEs" that are used for the remaining M64 segments.
+
+ We would like to investigate using additional M64 windows in "single
+ PE" mode to overlay over specific BARs to work around some of that, for
+ example for devices with very large BARs, e.g., GPUs. It would make
+ sense, but we haven't done it yet.
+
+3. Considerations for SR-IOV on PowerKVM
+========================================
+
+ * SR-IOV Background
+
+ The PCIe SR-IOV feature allows a single Physical Function (PF) to
+ support several Virtual Functions (VFs). Registers in the PF's SR-IOV
+ Capability control the number of VFs and whether they are enabled.
+
+ When VFs are enabled, they appear in Configuration Space like normal
+ PCI devices, but the BARs in VF config space headers are unusual. For
+ a non-VF device, software uses BARs in the config space header to
+ discover the BAR sizes and assign addresses for them. For VF devices,
+ software uses VF BAR registers in the *PF* SR-IOV Capability to
+ discover sizes and assign addresses. The BARs in the VF's config space
+ header are read-only zeros.
+
+ When a VF BAR in the PF SR-IOV Capability is programmed, it sets the
+ base address for all the corresponding VF(n) BARs. For example, if the
+ PF SR-IOV Capability is programmed to enable eight VFs, and it has a
+ 1MB VF BAR0, the address in that VF BAR sets the base of an 8MB region.
+ This region is divided into eight contiguous 1MB regions, each of which
+ is a BAR0 for one of the VFs. Note that even though the VF BAR
+ describes an 8MB region, the alignment requirement is for a single VF,
+ i.e., 1MB in this example.
+
+ There are several strategies for isolating VFs in PEs:
+
+ - M32 window: There's one M32 window, and it is split into 256
+ equally-sized segments. The finest granularity possible is a 256MB
+ window with 1MB segments. VF BARs that are 1MB or larger could be
+ mapped to separate PEs in this window. Each segment can be
+ individually mapped to a PE via the lookup table, so this is quite
+ flexible, but it works best when all the VF BARs are the same size. If
+ they are different sizes, the entire window has to be small enough that
+ the segment size matches the smallest VF BAR, which means larger VF
+ BARs span several segments.
+
+ - Non-segmented M64 window: A non-segmented M64 window is mapped entirely
+ to a single PE, so it could only isolate one VF.
+
+ - Single segmented M64 windows: A segmented M64 window could be used just
+ like the M32 window, but the segments can't be individually mapped to
+ PEs (the segment number is the PE#), so there isn't as much
+ flexibility. A VF with multiple BARs would have to be in a "domain" of
+ multiple PEs, which is not as well isolated as a single PE.
+
+ - Multiple segmented M64 windows: As usual, each window is split into 256
+ equally-sized segments, and the segment number is the PE#. But if we
+ use several M64 windows, they can be set to different base addresses
+ and different segment sizes. If we have VFs that each have a 1MB BAR
+ and a 32MB BAR, we could use one M64 window to assign 1MB segments and
+ another M64 window to assign 32MB segments.
+
+ Finally, the plan to use M64 windows for SR-IOV, which will be described
+ more in the next two sections. For a given VF BAR, we need to
+ effectively reserve the entire 256 segments (256 * VF BAR size) and
+ position the VF BAR to start at the beginning of a free range of
+ segments/PEs inside that M64 window.
+
+ The goal is of course to be able to give a separate PE for each VF.
+
+ The IODA2 platform has 16 M64 windows, which are used to map MMIO
+ range to PE#. Each M64 window defines one MMIO range and this range is
+ divided into 256 segments, with each segment corresponding to one PE.
+
+ We decide to leverage this M64 window to map VFs to individual PEs, since
+ SR-IOV VF BARs are all the same size.
+
+ But doing so introduces another problem: total_VFs is usually smaller
+ than the number of M64 window segments, so if we map one VF BAR directly
+ to one M64 window, some part of the M64 window will map to another
+ device's MMIO range.
+
+ IODA supports 256 PEs, so segmented windows contain 256 segments, so if
+ total_VFs is less than 256, we have the situation in Figure 1.0, where
+ segments [total_VFs, 255] of the M64 window may map to some MMIO range on
+ other devices::
+
+ 0 1 total_VFs - 1
+ +------+------+- -+------+------+
+ | | | ... | | |
+ +------+------+- -+------+------+
+
+ VF(n) BAR space
+
+ 0 1 total_VFs - 1 255
+ +------+------+- -+------+------+- -+------+------+
+ | | | ... | | | ... | | |
+ +------+------+- -+------+------+- -+------+------+
+
+ M64 window
+
+ Figure 1.0 Direct map VF(n) BAR space
+
+ Our current solution is to allocate 256 segments even if the VF(n) BAR
+ space doesn't need that much, as shown in Figure 1.1::
+
+ 0 1 total_VFs - 1 255
+ +------+------+- -+------+------+- -+------+------+
+ | | | ... | | | ... | | |
+ +------+------+- -+------+------+- -+------+------+
+
+ VF(n) BAR space + extra
+
+ 0 1 total_VFs - 1 255
+ +------+------+- -+------+------+- -+------+------+
+ | | | ... | | | ... | | |
+ +------+------+- -+------+------+- -+------+------+
+
+ M64 window
+
+ Figure 1.1 Map VF(n) BAR space + extra
+
+ Allocating the extra space ensures that the entire M64 window will be
+ assigned to this one SR-IOV device and none of the space will be
+ available for other devices. Note that this only expands the space
+ reserved in software; there are still only total_VFs VFs, and they only
+ respond to segments [0, total_VFs - 1]. There's nothing in hardware that
+ responds to segments [total_VFs, 255].
+
+4. Implications for the Generic PCI Code
+========================================
+
+The PCIe SR-IOV spec requires that the base of the VF(n) BAR space be
+aligned to the size of an individual VF BAR.
+
+In IODA2, the MMIO address determines the PE#. If the address is in an M32
+window, we can set the PE# by updating the table that translates segments
+to PE#s. Similarly, if the address is in an unsegmented M64 window, we can
+set the PE# for the window. But if it's in a segmented M64 window, the
+segment number is the PE#.
+
+Therefore, the only way to control the PE# for a VF is to change the base
+of the VF(n) BAR space in the VF BAR. If the PCI core allocates the exact
+amount of space required for the VF(n) BAR space, the VF BAR value is fixed
+and cannot be changed.
+
+On the other hand, if the PCI core allocates additional space, the VF BAR
+value can be changed as long as the entire VF(n) BAR space remains inside
+the space allocated by the core.
+
+Ideally the segment size will be the same as an individual VF BAR size.
+Then each VF will be in its own PE. The VF BARs (and therefore the PE#s)
+are contiguous. If VF0 is in PE(x), then VF(n) is in PE(x+n). If we
+allocate 256 segments, there are (256 - numVFs) choices for the PE# of VF0.
+
+If the segment size is smaller than the VF BAR size, it will take several
+segments to cover a VF BAR, and a VF will be in several PEs. This is
+possible, but the isolation isn't as good, and it reduces the number of PE#
+choices because instead of consuming only numVFs segments, the VF(n) BAR
+space will consume (numVFs * n) segments. That means there aren't as many
+available segments for adjusting base of the VF(n) BAR space.
diff --git a/Documentation/arch/powerpc/pmu-ebb.rst b/Documentation/arch/powerpc/pmu-ebb.rst
new file mode 100644
index 0000000000..4f474758eb
--- /dev/null
+++ b/Documentation/arch/powerpc/pmu-ebb.rst
@@ -0,0 +1,138 @@
+========================
+PMU Event Based Branches
+========================
+
+Event Based Branches (EBBs) are a feature which allows the hardware to
+branch directly to a specified user space address when certain events occur.
+
+The full specification is available in Power ISA v2.07:
+
+ https://www.power.org/documentation/power-isa-version-2-07/
+
+One type of event for which EBBs can be configured is PMU exceptions. This
+document describes the API for configuring the Power PMU to generate EBBs,
+using the Linux perf_events API.
+
+
+Terminology
+-----------
+
+Throughout this document we will refer to an "EBB event" or "EBB events". This
+just refers to a struct perf_event which has set the "EBB" flag in its
+attr.config. All events which can be configured on the hardware PMU are
+possible "EBB events".
+
+
+Background
+----------
+
+When a PMU EBB occurs it is delivered to the currently running process. As such
+EBBs can only sensibly be used by programs for self-monitoring.
+
+It is a feature of the perf_events API that events can be created on other
+processes, subject to standard permission checks. This is also true of EBB
+events, however unless the target process enables EBBs (via mtspr(BESCR)) no
+EBBs will ever be delivered.
+
+This makes it possible for a process to enable EBBs for itself, but not
+actually configure any events. At a later time another process can come along
+and attach an EBB event to the process, which will then cause EBBs to be
+delivered to the first process. It's not clear if this is actually useful.
+
+
+When the PMU is configured for EBBs, all PMU interrupts are delivered to the
+user process. This means once an EBB event is scheduled on the PMU, no non-EBB
+events can be configured. This means that EBB events can not be run
+concurrently with regular 'perf' commands, or any other perf events.
+
+It is however safe to run 'perf' commands on a process which is using EBBs. The
+kernel will in general schedule the EBB event, and perf will be notified that
+its events could not run.
+
+The exclusion between EBB events and regular events is implemented using the
+existing "pinned" and "exclusive" attributes of perf_events. This means EBB
+events will be given priority over other events, unless they are also pinned.
+If an EBB event and a regular event are both pinned, then whichever is enabled
+first will be scheduled and the other will be put in error state. See the
+section below titled "Enabling an EBB event" for more information.
+
+
+Creating an EBB event
+---------------------
+
+To request that an event is counted using EBB, the event code should have bit
+63 set.
+
+EBB events must be created with a particular, and restrictive, set of
+attributes - this is so that they interoperate correctly with the rest of the
+perf_events subsystem.
+
+An EBB event must be created with the "pinned" and "exclusive" attributes set.
+Note that if you are creating a group of EBB events, only the leader can have
+these attributes set.
+
+An EBB event must NOT set any of the "inherit", "sample_period", "freq" or
+"enable_on_exec" attributes.
+
+An EBB event must be attached to a task. This is specified to perf_event_open()
+by passing a pid value, typically 0 indicating the current task.
+
+All events in a group must agree on whether they want EBB. That is all events
+must request EBB, or none may request EBB.
+
+EBB events must specify the PMC they are to be counted on. This ensures
+userspace is able to reliably determine which PMC the event is scheduled on.
+
+
+Enabling an EBB event
+---------------------
+
+Once an EBB event has been successfully opened, it must be enabled with the
+perf_events API. This can be achieved either via the ioctl() interface, or the
+prctl() interface.
+
+However, due to the design of the perf_events API, enabling an event does not
+guarantee that it has been scheduled on the PMU. To ensure that the EBB event
+has been scheduled on the PMU, you must perform a read() on the event. If the
+read() returns EOF, then the event has not been scheduled and EBBs are not
+enabled.
+
+This behaviour occurs because the EBB event is pinned and exclusive. When the
+EBB event is enabled it will force all other non-pinned events off the PMU. In
+this case the enable will be successful. However if there is already an event
+pinned on the PMU then the enable will not be successful.
+
+
+Reading an EBB event
+--------------------
+
+It is possible to read() from an EBB event. However the results are
+meaningless. Because interrupts are being delivered to the user process the
+kernel is not able to count the event, and so will return a junk value.
+
+
+Closing an EBB event
+--------------------
+
+When an EBB event is finished with, you can close it using close() as for any
+regular event. If this is the last EBB event the PMU will be deconfigured and
+no further PMU EBBs will be delivered.
+
+
+EBB Handler
+-----------
+
+The EBB handler is just regular userspace code, however it must be written in
+the style of an interrupt handler. When the handler is entered all registers
+are live (possibly) and so must be saved somehow before the handler can invoke
+other code.
+
+It's up to the program how to handle this. For C programs a relatively simple
+option is to create an interrupt frame on the stack and save registers there.
+
+Fork
+----
+
+EBB events are not inherited across fork. If the child process wishes to use
+EBBs it should open a new event for itself. Similarly the EBB state in
+BESCR/EBBHR/EBBRR is cleared across fork().
diff --git a/Documentation/arch/powerpc/ptrace.rst b/Documentation/arch/powerpc/ptrace.rst
new file mode 100644
index 0000000000..5629edf4d5
--- /dev/null
+++ b/Documentation/arch/powerpc/ptrace.rst
@@ -0,0 +1,157 @@
+======
+Ptrace
+======
+
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PPC_PTRACE_GETHWDBGINFO
+============================
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process::
+
+ struct ppc_debug_info {
+ unit32_t version;
+ unit32_t num_instruction_bps;
+ unit32_t num_data_bps;
+ unit32_t num_condition_regs;
+ unit32_t data_bp_alignment;
+ unit32_t sizeof_condition; /* size of the DVC register */
+ uint64_t features; /* bitmask of the individual flags */
+ };
+
+features will have bits indicating whether there is support for::
+
+ #define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
+ #define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
+ #define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
+ #define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
+ #define PPC_DEBUG_FEATURE_DATA_BP_DAWR 0x10
+ #define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31 0x20
+
+2. PPC_PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure::
+
+ struct ppc_hw_breakpoint {
+ uint32_t version;
+ #define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
+ #define PPC_BREAKPOINT_TRIGGER_READ 0x2
+ #define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
+ uint32_t trigger_type; /* only some combinations allowed */
+ #define PPC_BREAKPOINT_MODE_EXACT 0x0
+ #define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
+ #define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
+ #define PPC_BREAKPOINT_MODE_MASK 0x3
+ uint32_t addr_mode; /* address match mode */
+
+ #define PPC_BREAKPOINT_CONDITION_MODE 0x3
+ #define PPC_BREAKPOINT_CONDITION_NONE 0x0
+ #define PPC_BREAKPOINT_CONDITION_AND 0x1
+ #define PPC_BREAKPOINT_CONDITION_EXACT 0x1 /* different name for the same thing as above */
+ #define PPC_BREAKPOINT_CONDITION_OR 0x2
+ #define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+ #define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 /* byte enable bits */
+ #define PPC_BREAKPOINT_CONDITION_BE(n) (1<<((n)+16))
+ uint32_t condition_mode; /* break/watchpoint condition flags */
+
+ uint64_t addr;
+ uint64_t addr2;
+ uint64_t condition_value;
+ };
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PPC_PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint::
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
+- set a watchpoint in server processors (BookS)::
+
+ p.version = 1;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_RW;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ or
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+ * addr2 - addr <= 8 Bytes.
+ */
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
+3. PPC_PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..
diff --git a/Documentation/arch/powerpc/qe_firmware.rst b/Documentation/arch/powerpc/qe_firmware.rst
new file mode 100644
index 0000000000..a358f152b7
--- /dev/null
+++ b/Documentation/arch/powerpc/qe_firmware.rst
@@ -0,0 +1,296 @@
+=========================================
+Freescale QUICC Engine Firmware Uploading
+=========================================
+
+(c) 2007 Timur Tabi <timur at freescale.com>,
+ Freescale Semiconductor
+
+.. Table of Contents
+
+ I - Software License for Firmware
+
+ II - Microcode Availability
+
+ III - Description and Terminology
+
+ IV - Microcode Programming Details
+
+ V - Firmware Structure Layout
+
+ VI - Sample Code for Creating Firmware Files
+
+Revision Information
+====================
+
+November 30, 2007: Rev 1.0 - Initial version
+
+I - Software License for Firmware
+=================================
+
+Each firmware file comes with its own software license. For information on
+the particular license, please see the license text that is distributed with
+the firmware.
+
+II - Microcode Availability
+===========================
+
+Firmware files are distributed through various channels. Some are available on
+http://opensource.freescale.com. For other firmware files, please contact
+your Freescale representative or your operating system vendor.
+
+III - Description and Terminology
+=================================
+
+In this document, the term 'microcode' refers to the sequence of 32-bit
+integers that compose the actual QE microcode.
+
+The term 'firmware' refers to a binary blob that contains the microcode as
+well as other data that
+
+ 1) describes the microcode's purpose
+ 2) describes how and where to upload the microcode
+ 3) specifies the values of various registers
+ 4) includes additional data for use by specific device drivers
+
+Firmware files are binary files that contain only a firmware.
+
+IV - Microcode Programming Details
+===================================
+
+The QE architecture allows for only one microcode present in I-RAM for each
+RISC processor. To replace any current microcode, a full QE reset (which
+disables the microcode) must be performed first.
+
+QE microcode is uploaded using the following procedure:
+
+1) The microcode is placed into I-RAM at a specific location, using the
+ IRAM.IADD and IRAM.IDATA registers.
+
+2) The CERCR.CIR bit is set to 0 or 1, depending on whether the firmware
+ needs split I-RAM. Split I-RAM is only meaningful for SOCs that have
+ QEs with multiple RISC processors, such as the 8360. Splitting the I-RAM
+ allows each processor to run a different microcode, effectively creating an
+ asymmetric multiprocessing (AMP) system.
+
+3) The TIBCR trap registers are loaded with the addresses of the trap handlers
+ in the microcode.
+
+4) The RSP.ECCR register is programmed with the value provided.
+
+5) If necessary, device drivers that need the virtual traps and extended mode
+ data will use them.
+
+Virtual Microcode Traps
+
+These virtual traps are conditional branches in the microcode. These are
+"soft" provisional introduced in the ROMcode in order to enable higher
+flexibility and save h/w traps If new features are activated or an issue is
+being fixed in the RAM package utilizing they should be activated. This data
+structure signals the microcode which of these virtual traps is active.
+
+This structure contains 6 words that the application should copy to some
+specific been defined. This table describes the structure::
+
+ ---------------------------------------------------------------
+ | Offset in | | Destination Offset | Size of |
+ | array | Protocol | within PRAM | Operand |
+ --------------------------------------------------------------|
+ | 0 | Ethernet | 0xF8 | 4 bytes |
+ | | interworking | | |
+ ---------------------------------------------------------------
+ | 4 | ATM | 0xF8 | 4 bytes |
+ | | interworking | | |
+ ---------------------------------------------------------------
+ | 8 | PPP | 0xF8 | 4 bytes |
+ | | interworking | | |
+ ---------------------------------------------------------------
+ | 12 | Ethernet RX | 0x22 | 1 byte |
+ | | Distributor Page | | |
+ ---------------------------------------------------------------
+ | 16 | ATM Globtal | 0x28 | 1 byte |
+ | | Params Table | | |
+ ---------------------------------------------------------------
+ | 20 | Insert Frame | 0xF8 | 4 bytes |
+ ---------------------------------------------------------------
+
+
+Extended Modes
+
+This is a double word bit array (64 bits) that defines special functionality
+which has an impact on the software drivers. Each bit has its own impact
+and has special instructions for the s/w associated with it. This structure is
+described in this table::
+
+ -----------------------------------------------------------------------
+ | Bit # | Name | Description |
+ -----------------------------------------------------------------------
+ | 0 | General | Indicates that prior to each host command |
+ | | push command | given by the application, the software must |
+ | | | assert a special host command (push command)|
+ | | | CECDR = 0x00800000. |
+ | | | CECR = 0x01c1000f. |
+ -----------------------------------------------------------------------
+ | 1 | UCC ATM | Indicates that after issuing ATM RX INIT |
+ | | RX INIT | command, the host must issue another special|
+ | | push command | command (push command) and immediately |
+ | | | following that re-issue the ATM RX INIT |
+ | | | command. (This makes the sequence of |
+ | | | initializing the ATM receiver a sequence of |
+ | | | three host commands) |
+ | | | CECDR = 0x00800000. |
+ | | | CECR = 0x01c1000f. |
+ -----------------------------------------------------------------------
+ | 2 | Add/remove | Indicates that following the specific host |
+ | | command | command: "Add/Remove entry in Hash Lookup |
+ | | validation | Table" used in Interworking setup, the user |
+ | | | must issue another command. |
+ | | | CECDR = 0xce000003. |
+ | | | CECR = 0x01c10f58. |
+ -----------------------------------------------------------------------
+ | 3 | General push | Indicates that the s/w has to initialize |
+ | | command | some pointers in the Ethernet thread pages |
+ | | | which are used when Header Compression is |
+ | | | activated. The full details of these |
+ | | | pointers is located in the software drivers.|
+ -----------------------------------------------------------------------
+ | 4 | General push | Indicates that after issuing Ethernet TX |
+ | | command | INIT command, user must issue this command |
+ | | | for each SNUM of Ethernet TX thread. |
+ | | | CECDR = 0x00800003. |
+ | | | CECR = 0x7'b{0}, 8'b{Enet TX thread SNUM}, |
+ | | | 1'b{1}, 12'b{0}, 4'b{1} |
+ -----------------------------------------------------------------------
+ | 5 - 31 | N/A | Reserved, set to zero. |
+ -----------------------------------------------------------------------
+
+V - Firmware Structure Layout
+==============================
+
+QE microcode from Freescale is typically provided as a header file. This
+header file contains macros that define the microcode binary itself as well as
+some other data used in uploading that microcode. The format of these files
+do not lend themselves to simple inclusion into other code. Hence,
+the need for a more portable format. This section defines that format.
+
+Instead of distributing a header file, the microcode and related data are
+embedded into a binary blob. This blob is passed to the qe_upload_firmware()
+function, which parses the blob and performs everything necessary to upload
+the microcode.
+
+All integers are big-endian. See the comments for function
+qe_upload_firmware() for up-to-date implementation information.
+
+This structure supports versioning, where the version of the structure is
+embedded into the structure itself. To ensure forward and backwards
+compatibility, all versions of the structure must use the same 'qe_header'
+structure at the beginning.
+
+'header' (type: struct qe_header):
+ The 'length' field is the size, in bytes, of the entire structure,
+ including all the microcode embedded in it, as well as the CRC (if
+ present).
+
+ The 'magic' field is an array of three bytes that contains the letters
+ 'Q', 'E', and 'F'. This is an identifier that indicates that this
+ structure is a QE Firmware structure.
+
+ The 'version' field is a single byte that indicates the version of this
+ structure. If the layout of the structure should ever need to be
+ changed to add support for additional types of microcode, then the
+ version number should also be changed.
+
+The 'id' field is a null-terminated string(suitable for printing) that
+identifies the firmware.
+
+The 'count' field indicates the number of 'microcode' structures. There
+must be one and only one 'microcode' structure for each RISC processor.
+Therefore, this field also represents the number of RISC processors for this
+SOC.
+
+The 'soc' structure contains the SOC numbers and revisions used to match
+the microcode to the SOC itself. Normally, the microcode loader should
+check the data in this structure with the SOC number and revisions, and
+only upload the microcode if there's a match. However, this check is not
+made on all platforms.
+
+Although it is not recommended, you can specify '0' in the soc.model
+field to skip matching SOCs altogether.
+
+The 'model' field is a 16-bit number that matches the actual SOC. The
+'major' and 'minor' fields are the major and minor revision numbers,
+respectively, of the SOC.
+
+For example, to match the 8323, revision 1.0::
+
+ soc.model = 8323
+ soc.major = 1
+ soc.minor = 0
+
+'padding' is necessary for structure alignment. This field ensures that the
+'extended_modes' field is aligned on a 64-bit boundary.
+
+'extended_modes' is a bitfield that defines special functionality which has an
+impact on the device drivers. Each bit has its own impact and has special
+instructions for the driver associated with it. This field is stored in
+the QE library and available to any driver that calls qe_get_firmware_info().
+
+'vtraps' is an array of 8 words that contain virtual trap values for each
+virtual traps. As with 'extended_modes', this field is stored in the QE
+library and available to any driver that calls qe_get_firmware_info().
+
+'microcode' (type: struct qe_microcode):
+ For each RISC processor there is one 'microcode' structure. The first
+ 'microcode' structure is for the first RISC, and so on.
+
+ The 'id' field is a null-terminated string suitable for printing that
+ identifies this particular microcode.
+
+ 'traps' is an array of 16 words that contain hardware trap values
+ for each of the 16 traps. If trap[i] is 0, then this particular
+ trap is to be ignored (i.e. not written to TIBCR[i]). The entire value
+ is written as-is to the TIBCR[i] register, so be sure to set the EN
+ and T_IBP bits if necessary.
+
+ 'eccr' is the value to program into the ECCR register.
+
+ 'iram_offset' is the offset into IRAM to start writing the
+ microcode.
+
+ 'count' is the number of 32-bit words in the microcode.
+
+ 'code_offset' is the offset, in bytes, from the beginning of this
+ structure where the microcode itself can be found. The first
+ microcode binary should be located immediately after the 'microcode'
+ array.
+
+ 'major', 'minor', and 'revision' are the major, minor, and revision
+ version numbers, respectively, of the microcode. If all values are 0,
+ then these fields are ignored.
+
+ 'reserved' is necessary for structure alignment. Since 'microcode'
+ is an array, the 64-bit 'extended_modes' field needs to be aligned
+ on a 64-bit boundary, and this can only happen if the size of
+ 'microcode' is a multiple of 8 bytes. To ensure that, we add
+ 'reserved'.
+
+After the last microcode is a 32-bit CRC. It can be calculated using
+this algorithm::
+
+ u32 crc32(const u8 *p, unsigned int len)
+ {
+ unsigned int i;
+ u32 crc = 0;
+
+ while (len--) {
+ crc ^= *p++;
+ for (i = 0; i < 8; i++)
+ crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+ }
+ return crc;
+ }
+
+VI - Sample Code for Creating Firmware Files
+============================================
+
+A Python program that creates firmware binaries from the header files normally
+distributed by Freescale can be found on http://opensource.freescale.com.
diff --git a/Documentation/arch/powerpc/syscall64-abi.rst b/Documentation/arch/powerpc/syscall64-abi.rst
new file mode 100644
index 0000000000..56490c4c0c
--- /dev/null
+++ b/Documentation/arch/powerpc/syscall64-abi.rst
@@ -0,0 +1,153 @@
+===============================================
+Power Architecture 64-bit Linux system call ABI
+===============================================
+
+syscall
+=======
+
+Invocation
+----------
+The syscall is made with the sc instruction, and returns with execution
+continuing at the instruction following the sc instruction.
+
+If PPC_FEATURE2_SCV appears in the AT_HWCAP2 ELF auxiliary vector, the
+scv 0 instruction is an alternative that may provide better performance,
+with some differences to calling sequence.
+
+syscall calling sequence\ [1]_ matches the Power Architecture 64-bit ELF ABI
+specification C function calling sequence, including register preservation
+rules, with the following differences.
+
+.. [1] Some syscalls (typically low-level management functions) may have
+ different calling sequences (e.g., rt_sigreturn).
+
+Parameters
+----------
+The system call number is specified in r0.
+
+There is a maximum of 6 integer parameters to a syscall, passed in r3-r8.
+
+Return value
+------------
+- For the sc instruction, both a value and an error condition are returned.
+ cr0.SO is the error condition, and r3 is the return value. When cr0.SO is
+ clear, the syscall succeeded and r3 is the return value. When cr0.SO is set,
+ the syscall failed and r3 is the error value (that normally corresponds to
+ errno).
+
+- For the scv 0 instruction, the return value indicates failure if it is
+ -4095..-1 (i.e., it is >= -MAX_ERRNO (-4095) as an unsigned comparison),
+ in which case the error value is the negated return value.
+
+Stack
+-----
+System calls do not modify the caller's stack frame. For example, the caller's
+stack frame LR and CR save fields are not used.
+
+Register preservation rules
+---------------------------
+Register preservation rules match the ELF ABI calling sequence with some
+differences.
+
+For the sc instruction, the differences from the ELF ABI are as follows:
+
++--------------+--------------------+-----------------------------------------+
+| Register | Preservation Rules | Purpose |
++==============+====================+=========================================+
+| r0 | Volatile | (System call number.) |
++--------------+--------------------+-----------------------------------------+
+| r3 | Volatile | (Parameter 1, and return value.) |
++--------------+--------------------+-----------------------------------------+
+| r4-r8 | Volatile | (Parameters 2-6.) |
++--------------+--------------------+-----------------------------------------+
+| cr0 | Volatile | (cr0.SO is the return error condition.) |
++--------------+--------------------+-----------------------------------------+
+| cr1, cr5-7 | Nonvolatile | |
++--------------+--------------------+-----------------------------------------+
+| lr | Nonvolatile | |
++--------------+--------------------+-----------------------------------------+
+
+For the scv 0 instruction, the differences from the ELF ABI are as follows:
+
++--------------+--------------------+-----------------------------------------+
+| Register | Preservation Rules | Purpose |
++==============+====================+=========================================+
+| r0 | Volatile | (System call number.) |
++--------------+--------------------+-----------------------------------------+
+| r3 | Volatile | (Parameter 1, and return value.) |
++--------------+--------------------+-----------------------------------------+
+| r4-r8 | Volatile | (Parameters 2-6.) |
++--------------+--------------------+-----------------------------------------+
+
+All floating point and vector data registers as well as control and status
+registers are nonvolatile.
+
+Transactional Memory
+--------------------
+Syscall behavior can change if the processor is in transactional or suspended
+transaction state, and the syscall can affect the behavior of the transaction.
+
+If the processor is in suspended state when a syscall is made, the syscall
+will be performed as normal, and will return as normal. The syscall will be
+performed in suspended state, so its side effects will be persistent according
+to the usual transactional memory semantics. A syscall may or may not result
+in the transaction being doomed by hardware.
+
+If the processor is in transactional state when a syscall is made, then the
+behavior depends on the presence of PPC_FEATURE2_HTM_NOSC in the AT_HWCAP2 ELF
+auxiliary vector.
+
+- If present, which is the case for newer kernels, then the syscall will not
+ be performed and the transaction will be doomed by the kernel with the
+ failure code TM_CAUSE_SYSCALL | TM_CAUSE_PERSISTENT in the TEXASR SPR.
+
+- If not present (older kernels), then the kernel will suspend the
+ transactional state and the syscall will proceed as in the case of a
+ suspended state syscall, and will resume the transactional state before
+ returning to the caller. This case is not well defined or supported, so this
+ behavior should not be relied upon.
+
+scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
+
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
+vsyscall
+========
+
+vsyscall calling sequence matches the syscall calling sequence, with the
+following differences. Some vsyscalls may have different calling sequences.
+
+Parameters and return value
+---------------------------
+r0 is not used as an input. The vsyscall is selected by its address.
+
+Stack
+-----
+The vsyscall may or may not use the caller's stack frame save areas.
+
+Register preservation rules
+---------------------------
+
+=========== ========
+r0 Volatile
+cr1, cr5-7 Volatile
+lr Volatile
+=========== ========
+
+Invocation
+----------
+The vsyscall is performed with a branch-with-link instruction to the vsyscall
+function address.
+
+Transactional Memory
+--------------------
+vsyscalls will run in the same transactional state as the caller. A vsyscall
+may or may not result in the transaction being doomed by hardware.
diff --git a/Documentation/arch/powerpc/transactional_memory.rst b/Documentation/arch/powerpc/transactional_memory.rst
new file mode 100644
index 0000000000..040a20675f
--- /dev/null
+++ b/Documentation/arch/powerpc/transactional_memory.rst
@@ -0,0 +1,274 @@
+============================
+Transactional Memory support
+============================
+
+POWER kernel support for this feature is currently limited to supporting
+its use by user programs. It is not currently used by the kernel itself.
+
+This file aims to sum up how it is supported by Linux and what behaviour you
+can expect from your user programs.
+
+
+Basic overview
+==============
+
+Hardware Transactional Memory is supported on POWER8 processors, and is a
+feature that enables a different form of atomic memory access. Several new
+instructions are presented to delimit transactions; transactions are
+guaranteed to either complete atomically or roll back and undo any partial
+changes.
+
+A simple transaction looks like this::
+
+ begin_move_money:
+ tbegin
+ beq abort_handler
+
+ ld r4, SAVINGS_ACCT(r3)
+ ld r5, CURRENT_ACCT(r3)
+ subi r5, r5, 1
+ addi r4, r4, 1
+ std r4, SAVINGS_ACCT(r3)
+ std r5, CURRENT_ACCT(r3)
+
+ tend
+
+ b continue
+
+ abort_handler:
+ ... test for odd failures ...
+
+ /* Retry the transaction if it failed because it conflicted with
+ * someone else: */
+ b begin_move_money
+
+
+The 'tbegin' instruction denotes the start point, and 'tend' the end point.
+Between these points the processor is in 'Transactional' state; any memory
+references will complete in one go if there are no conflicts with other
+transactional or non-transactional accesses within the system. In this
+example, the transaction completes as though it were normal straight-line code
+IF no other processor has touched SAVINGS_ACCT(r3) or CURRENT_ACCT(r3); an
+atomic move of money from the current account to the savings account has been
+performed. Even though the normal ld/std instructions are used (note no
+lwarx/stwcx), either *both* SAVINGS_ACCT(r3) and CURRENT_ACCT(r3) will be
+updated, or neither will be updated.
+
+If, in the meantime, there is a conflict with the locations accessed by the
+transaction, the transaction will be aborted by the CPU. Register and memory
+state will roll back to that at the 'tbegin', and control will continue from
+'tbegin+4'. The branch to abort_handler will be taken this second time; the
+abort handler can check the cause of the failure, and retry.
+
+Checkpointed registers include all GPRs, FPRs, VRs/VSRs, LR, CCR/CR, CTR, FPCSR
+and a few other status/flag regs; see the ISA for details.
+
+Causes of transaction aborts
+============================
+
+- Conflicts with cache lines used by other processors
+- Signals
+- Context switches
+- See the ISA for full documentation of everything that will abort transactions.
+
+
+Syscalls
+========
+
+Syscalls made from within an active transaction will not be performed and the
+transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
+| TM_CAUSE_PERSISTENT.
+
+Syscalls made from within a suspended transaction are performed as normal and
+the transaction is not explicitly doomed by the kernel. However, what the
+kernel does to perform the syscall may result in the transaction being doomed
+by the hardware. The syscall is performed in suspended mode so any side
+effects will be persistent, independent of transaction success or failure. No
+guarantees are provided by the kernel about which syscalls will affect
+transaction success.
+
+Care must be taken when relying on syscalls to abort during active transactions
+if the calls are made via a library. Libraries may cache values (which may
+give the appearance of success) or perform operations that cause transaction
+failure before entering the kernel (which may produce different failure codes).
+Examples are glibc's getpid() and lazy symbol resolution.
+
+
+Signals
+=======
+
+Delivery of signals (both sync and async) during transactions provides a second
+thread state (ucontext/mcontext) to represent the second transactional register
+state. Signal delivery 'treclaim's to capture both register states, so signals
+abort transactions. The usual ucontext_t passed to the signal handler
+represents the checkpointed/original register state; the signal appears to have
+arisen at 'tbegin+4'.
+
+If the sighandler ucontext has uc_link set, a second ucontext has been
+delivered. For future compatibility the MSR.TS field should be checked to
+determine the transactional state -- if so, the second ucontext in uc->uc_link
+represents the active transactional registers at the point of the signal.
+
+For 64-bit processes, uc->uc_mcontext.regs->msr is a full 64-bit MSR and its TS
+field shows the transactional mode.
+
+For 32-bit processes, the mcontext's MSR register is only 32 bits; the top 32
+bits are stored in the MSR of the second ucontext, i.e. in
+uc->uc_link->uc_mcontext.regs->msr. The top word contains the transactional
+state TS.
+
+However, basic signal handlers don't need to be aware of transactions
+and simply returning from the handler will deal with things correctly:
+
+Transaction-aware signal handlers can read the transactional register state
+from the second ucontext. This will be necessary for crash handlers to
+determine, for example, the address of the instruction causing the SIGSEGV.
+
+Example signal handler::
+
+ void crash_handler(int sig, siginfo_t *si, void *uc)
+ {
+ ucontext_t *ucp = uc;
+ ucontext_t *transactional_ucp = ucp->uc_link;
+
+ if (ucp_link) {
+ u64 msr = ucp->uc_mcontext.regs->msr;
+ /* May have transactional ucontext! */
+ #ifndef __powerpc64__
+ msr |= ((u64)transactional_ucp->uc_mcontext.regs->msr) << 32;
+ #endif
+ if (MSR_TM_ACTIVE(msr)) {
+ /* Yes, we crashed during a transaction. Oops. */
+ fprintf(stderr, "Transaction to be restarted at 0x%llx, but "
+ "crashy instruction was at 0x%llx\n",
+ ucp->uc_mcontext.regs->nip,
+ transactional_ucp->uc_mcontext.regs->nip);
+ }
+ }
+
+ fix_the_problem(ucp->dar);
+ }
+
+When in an active transaction that takes a signal, we need to be careful with
+the stack. It's possible that the stack has moved back up after the tbegin.
+The obvious case here is when the tbegin is called inside a function that
+returns before a tend. In this case, the stack is part of the checkpointed
+transactional memory state. If we write over this non transactionally or in
+suspend, we are in trouble because if we get a tm abort, the program counter and
+stack pointer will be back at the tbegin but our in memory stack won't be valid
+anymore.
+
+To avoid this, when taking a signal in an active transaction, we need to use
+the stack pointer from the checkpointed state, rather than the speculated
+state. This ensures that the signal context (written tm suspended) will be
+written below the stack required for the rollback. The transaction is aborted
+because of the treclaim, so any memory written between the tbegin and the
+signal will be rolled back anyway.
+
+For signals taken in non-TM or suspended mode, we use the
+normal/non-checkpointed stack pointer.
+
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
+
+Failure cause codes used by kernel
+==================================
+
+These are defined in <asm/reg.h>, and distinguish different reasons why the
+kernel aborted a transaction:
+
+ ====================== ================================
+ TM_CAUSE_RESCHED Thread was rescheduled.
+ TM_CAUSE_TLBI Software TLB invalid.
+ TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
+ TM_CAUSE_SYSCALL Syscall from active transaction.
+ TM_CAUSE_SIGNAL Signal delivered.
+ TM_CAUSE_MISC Currently unused.
+ TM_CAUSE_ALIGNMENT Alignment fault.
+ TM_CAUSE_EMULATE Emulation that touched memory.
+ ====================== ================================
+
+These can be checked by the user program's abort handler as TEXASR[0:7]. If
+bit 7 is set, it indicates that the error is considered persistent. For example
+a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.
+
+GDB
+===
+
+GDB and ptrace are not currently TM-aware. If one stops during a transaction,
+it looks like the transaction has just started (the checkpointed state is
+presented). The transaction cannot then be continued and will take the failure
+handler route. Furthermore, the transactional 2nd register state will be
+inaccessible. GDB can currently be used on programs using TM, but not sensibly
+in parts within transactions.
+
+POWER9
+======
+
+TM on POWER9 has issues with storing the complete register state. This
+is described in this commit::
+
+ commit 4bb3c7a0208fc13ca70598efd109901a7cd45ae7
+ Author: Paul Mackerras <paulus@ozlabs.org>
+ Date: Wed Mar 21 21:32:01 2018 +1100
+ KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9
+
+To account for this different POWER9 chips have TM enabled in
+different ways.
+
+On POWER9N DD2.01 and below, TM is disabled. ie
+HWCAP2[PPC_FEATURE2_HTM] is not set.
+
+On POWER9N DD2.1 TM is configured by firmware to always abort a
+transaction when tm suspend occurs. So tsuspend will cause a
+transaction to be aborted and rolled back. Kernel exceptions will also
+cause the transaction to be aborted and rolled back and the exception
+will not occur. If userspace constructs a sigcontext that enables TM
+suspend, the sigcontext will be rejected by the kernel. This mode is
+advertised to users with HWCAP2[PPC_FEATURE2_HTM_NO_SUSPEND] set.
+HWCAP2[PPC_FEATURE2_HTM] is not set in this mode.
+
+On POWER9N DD2.2 and above, KVM and POWERVM emulate TM for guests (as
+described in commit 4bb3c7a0208f), hence TM is enabled for guests
+ie. HWCAP2[PPC_FEATURE2_HTM] is set for guest userspace. Guests that
+makes heavy use of TM suspend (tsuspend or kernel suspend) will result
+in traps into the hypervisor and hence will suffer a performance
+degradation. Host userspace has TM disabled
+ie. HWCAP2[PPC_FEATURE2_HTM] is not set. (although we make enable it
+at some point in the future if we bring the emulation into host
+userspace context switching).
+
+POWER9C DD1.2 and above are only available with POWERVM and hence
+Linux only runs as a guest. On these systems TM is emulated like on
+POWER9N DD2.2.
+
+Guest migration from POWER8 to POWER9 will work with POWER9N DD2.2 and
+POWER9C DD1.2. Since earlier POWER9 processors don't support TM
+emulation, migration from POWER8 to POWER9 is not supported there.
+
+Kernel implementation
+=====================
+
+h/rfid mtmsrd quirk
+-------------------
+
+As defined in the ISA, rfid has a quirk which is useful in early
+exception handling. When in a userspace transaction and we enter the
+kernel via some exception, MSR will end up as TM=0 and TS=01 (ie. TM
+off but TM suspended). Regularly the kernel will want change bits in
+the MSR and will perform an rfid to do this. In this case rfid can
+have SRR0 TM = 0 and TS = 00 (ie. TM off and non transaction) and the
+resulting MSR will retain TM = 0 and TS=01 from before (ie. stay in
+suspend). This is a quirk in the architecture as this would normally
+be a transition from TS=01 to TS=00 (ie. suspend -> non transactional)
+which is an illegal transition.
+
+This quirk is described the architecture in the definition of rfid
+with these lines:
+
+ if (MSR 29:31 ¬ = 0b010 | SRR1 29:31 ¬ = 0b000) then
+ MSR 29:31 <- SRR1 29:31
+
+hrfid and mtmsrd have the same quirk.
+
+The Linux kernel uses this quirk in its early exception handling.
diff --git a/Documentation/arch/powerpc/ultravisor.rst b/Documentation/arch/powerpc/ultravisor.rst
new file mode 100644
index 0000000000..ba6b1bf1cc
--- /dev/null
+++ b/Documentation/arch/powerpc/ultravisor.rst
@@ -0,0 +1,1117 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _ultravisor:
+
+============================
+Protected Execution Facility
+============================
+
+.. contents::
+ :depth: 3
+
+Introduction
+############
+
+ Protected Execution Facility (PEF) is an architectural change for
+ POWER 9 that enables Secure Virtual Machines (SVMs). DD2.3 chips
+ (PVR=0x004e1203) or greater will be PEF-capable. A new ISA release
+ will include the PEF RFC02487 changes.
+
+ When enabled, PEF adds a new higher privileged mode, called Ultravisor
+ mode, to POWER architecture. Along with the new mode there is new
+ firmware called the Protected Execution Ultravisor (or Ultravisor
+ for short). Ultravisor mode is the highest privileged mode in POWER
+ architecture.
+
+ +------------------+
+ | Privilege States |
+ +==================+
+ | Problem |
+ +------------------+
+ | Supervisor |
+ +------------------+
+ | Hypervisor |
+ +------------------+
+ | Ultravisor |
+ +------------------+
+
+ PEF protects SVMs from the hypervisor, privileged users, and other
+ VMs in the system. SVMs are protected while at rest and can only be
+ executed by an authorized machine. All virtual machines utilize
+ hypervisor services. The Ultravisor filters calls between the SVMs
+ and the hypervisor to assure that information does not accidentally
+ leak. All hypercalls except H_RANDOM are reflected to the hypervisor.
+ H_RANDOM is not reflected to prevent the hypervisor from influencing
+ random values in the SVM.
+
+ To support this there is a refactoring of the ownership of resources
+ in the CPU. Some of the resources which were previously hypervisor
+ privileged are now ultravisor privileged.
+
+Hardware
+========
+
+ The hardware changes include the following:
+
+ * There is a new bit in the MSR that determines whether the current
+ process is running in secure mode, MSR(S) bit 41. MSR(S)=1, process
+ is in secure mode, MSR(s)=0 process is in normal mode.
+
+ * The MSR(S) bit can only be set by the Ultravisor.
+
+ * HRFID cannot be used to set the MSR(S) bit. If the hypervisor needs
+ to return to a SVM it must use an ultracall. It can determine if
+ the VM it is returning to is secure.
+
+ * There is a new Ultravisor privileged register, SMFCTRL, which has an
+ enable/disable bit SMFCTRL(E).
+
+ * The privilege of a process is now determined by three MSR bits,
+ MSR(S, HV, PR). In each of the tables below the modes are listed
+ from least privilege to highest privilege. The higher privilege
+ modes can access all the resources of the lower privilege modes.
+
+ **Secure Mode MSR Settings**
+
+ +---+---+---+---------------+
+ | S | HV| PR|Privilege |
+ +===+===+===+===============+
+ | 1 | 0 | 1 | Problem |
+ +---+---+---+---------------+
+ | 1 | 0 | 0 | Privileged(OS)|
+ +---+---+---+---------------+
+ | 1 | 1 | 0 | Ultravisor |
+ +---+---+---+---------------+
+ | 1 | 1 | 1 | Reserved |
+ +---+---+---+---------------+
+
+ **Normal Mode MSR Settings**
+
+ +---+---+---+---------------+
+ | S | HV| PR|Privilege |
+ +===+===+===+===============+
+ | 0 | 0 | 1 | Problem |
+ +---+---+---+---------------+
+ | 0 | 0 | 0 | Privileged(OS)|
+ +---+---+---+---------------+
+ | 0 | 1 | 0 | Hypervisor |
+ +---+---+---+---------------+
+ | 0 | 1 | 1 | Problem (Host)|
+ +---+---+---+---------------+
+
+ * Memory is partitioned into secure and normal memory. Only processes
+ that are running in secure mode can access secure memory.
+
+ * The hardware does not allow anything that is not running secure to
+ access secure memory. This means that the Hypervisor cannot access
+ the memory of the SVM without using an ultracall (asking the
+ Ultravisor). The Ultravisor will only allow the hypervisor to see
+ the SVM memory encrypted.
+
+ * I/O systems are not allowed to directly address secure memory. This
+ limits the SVMs to virtual I/O only.
+
+ * The architecture allows the SVM to share pages of memory with the
+ hypervisor that are not protected with encryption. However, this
+ sharing must be initiated by the SVM.
+
+ * When a process is running in secure mode all hypercalls
+ (syscall lev=1) go to the Ultravisor.
+
+ * When a process is in secure mode all interrupts go to the
+ Ultravisor.
+
+ * The following resources have become Ultravisor privileged and
+ require an Ultravisor interface to manipulate:
+
+ * Processor configurations registers (SCOMs).
+
+ * Stop state information.
+
+ * The debug registers CIABR, DAWR, and DAWRX when SMFCTRL(D) is set.
+ If SMFCTRL(D) is not set they do not work in secure mode. When set,
+ reading and writing requires an Ultravisor call, otherwise that
+ will cause a Hypervisor Emulation Assistance interrupt.
+
+ * PTCR and partition table entries (partition table is in secure
+ memory). An attempt to write to PTCR will cause a Hypervisor
+ Emulation Assitance interrupt.
+
+ * LDBAR (LD Base Address Register) and IMC (In-Memory Collection)
+ non-architected registers. An attempt to write to them will cause a
+ Hypervisor Emulation Assistance interrupt.
+
+ * Paging for an SVM, sharing of memory with Hypervisor for an SVM.
+ (Including Virtual Processor Area (VPA) and virtual I/O).
+
+
+Software/Microcode
+==================
+
+ The software changes include:
+
+ * SVMs are created from normal VM using (open source) tooling supplied
+ by IBM.
+
+ * All SVMs start as normal VMs and utilize an ultracall, UV_ESM
+ (Enter Secure Mode), to make the transition.
+
+ * When the UV_ESM ultracall is made the Ultravisor copies the VM into
+ secure memory, decrypts the verification information, and checks the
+ integrity of the SVM. If the integrity check passes the Ultravisor
+ passes control in secure mode.
+
+ * The verification information includes the pass phrase for the
+ encrypted disk associated with the SVM. This pass phrase is given
+ to the SVM when requested.
+
+ * The Ultravisor is not involved in protecting the encrypted disk of
+ the SVM while at rest.
+
+ * For external interrupts the Ultravisor saves the state of the SVM,
+ and reflects the interrupt to the hypervisor for processing.
+ For hypercalls, the Ultravisor inserts neutral state into all
+ registers not needed for the hypercall then reflects the call to
+ the hypervisor for processing. The H_RANDOM hypercall is performed
+ by the Ultravisor and not reflected.
+
+ * For virtual I/O to work bounce buffering must be done.
+
+ * The Ultravisor uses AES (IAPM) for protection of SVM memory. IAPM
+ is a mode of AES that provides integrity and secrecy concurrently.
+
+ * The movement of data between normal and secure pages is coordinated
+ with the Ultravisor by a new HMM plug-in in the Hypervisor.
+
+ The Ultravisor offers new services to the hypervisor and SVMs. These
+ are accessed through ultracalls.
+
+Terminology
+===========
+
+ * Hypercalls: special system calls used to request services from
+ Hypervisor.
+
+ * Normal memory: Memory that is accessible to Hypervisor.
+
+ * Normal page: Page backed by normal memory and available to
+ Hypervisor.
+
+ * Shared page: A page backed by normal memory and available to both
+ the Hypervisor/QEMU and the SVM (i.e page has mappings in SVM and
+ Hypervisor/QEMU).
+
+ * Secure memory: Memory that is accessible only to Ultravisor and
+ SVMs.
+
+ * Secure page: Page backed by secure memory and only available to
+ Ultravisor and SVM.
+
+ * SVM: Secure Virtual Machine.
+
+ * Ultracalls: special system calls used to request services from
+ Ultravisor.
+
+
+Ultravisor calls API
+####################
+
+ This section describes Ultravisor calls (ultracalls) needed to
+ support Secure Virtual Machines (SVM)s and Paravirtualized KVM. The
+ ultracalls allow the SVMs and Hypervisor to request services from the
+ Ultravisor such as accessing a register or memory region that can only
+ be accessed when running in Ultravisor-privileged mode.
+
+ The specific service needed from an ultracall is specified in register
+ R3 (the first parameter to the ultracall). Other parameters to the
+ ultracall, if any, are specified in registers R4 through R12.
+
+ Return value of all ultracalls is in register R3. Other output values
+ from the ultracall, if any, are returned in registers R4 through R12.
+ The only exception to this register usage is the ``UV_RETURN``
+ ultracall described below.
+
+ Each ultracall returns specific error codes, applicable in the context
+ of the ultracall. However, like with the PowerPC Architecture Platform
+ Reference (PAPR), if no specific error code is defined for a
+ particular situation, then the ultracall will fallback to an erroneous
+ parameter-position based code. i.e U_PARAMETER, U_P2, U_P3 etc
+ depending on the ultracall parameter that may have caused the error.
+
+ Some ultracalls involve transferring a page of data between Ultravisor
+ and Hypervisor. Secure pages that are transferred from secure memory
+ to normal memory may be encrypted using dynamically generated keys.
+ When the secure pages are transferred back to secure memory, they may
+ be decrypted using the same dynamically generated keys. Generation and
+ management of these keys will be covered in a separate document.
+
+ For now this only covers ultracalls currently implemented and being
+ used by Hypervisor and SVMs but others can be added here when it
+ makes sense.
+
+ The full specification for all hypercalls/ultracalls will eventually
+ be made available in the public/OpenPower version of the PAPR
+ specification.
+
+ .. note::
+
+ If PEF is not enabled, the ultracalls will be redirected to the
+ Hypervisor which must handle/fail the calls.
+
+Ultracalls used by Hypervisor
+=============================
+
+ This section describes the virtual memory management ultracalls used
+ by the Hypervisor to manage SVMs.
+
+UV_PAGE_OUT
+-----------
+
+ Encrypt and move the contents of a page from secure memory to normal
+ memory.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_PAGE_OUT,
+ uint16_t lpid, /* LPAR ID */
+ uint64_t dest_ra, /* real address of destination page */
+ uint64_t src_gpa, /* source guest-physical-address */
+ uint8_t flags, /* flags */
+ uint64_t order) /* page size order */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``dest_ra`` is invalid.
+ * U_P3 if the ``src_gpa`` address is invalid.
+ * U_P4 if any bit in the ``flags`` is unrecognized
+ * U_P5 if the ``order`` parameter is unsupported.
+ * U_FUNCTION if functionality is not supported.
+ * U_BUSY if page cannot be currently paged-out.
+
+Description
+~~~~~~~~~~~
+
+ Encrypt the contents of a secure-page and make it available to
+ Hypervisor in a normal page.
+
+ By default, the source page is unmapped from the SVM's partition-
+ scoped page table. But the Hypervisor can provide a hint to the
+ Ultravisor to retain the page mapping by setting the ``UV_SNAPSHOT``
+ flag in ``flags`` parameter.
+
+ If the source page is already a shared page the call returns
+ U_SUCCESS, without doing anything.
+
+Use cases
+~~~~~~~~~
+
+ #. QEMU attempts to access an address belonging to the SVM but the
+ page frame for that address is not mapped into QEMU's address
+ space. In this case, the Hypervisor will allocate a page frame,
+ map it into QEMU's address space and issue the ``UV_PAGE_OUT``
+ call to retrieve the encrypted contents of the page.
+
+ #. When Ultravisor runs low on secure memory and it needs to page-out
+ an LRU page. In this case, Ultravisor will issue the
+ ``H_SVM_PAGE_OUT`` hypercall to the Hypervisor. The Hypervisor will
+ then allocate a normal page and issue the ``UV_PAGE_OUT`` ultracall
+ and the Ultravisor will encrypt and move the contents of the secure
+ page into the normal page.
+
+ #. When Hypervisor accesses SVM data, the Hypervisor requests the
+ Ultravisor to transfer the corresponding page into a insecure page,
+ which the Hypervisor can access. The data in the normal page will
+ be encrypted though.
+
+UV_PAGE_IN
+----------
+
+ Move the contents of a page from normal memory to secure memory.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_PAGE_IN,
+ uint16_t lpid, /* the LPAR ID */
+ uint64_t src_ra, /* source real address of page */
+ uint64_t dest_gpa, /* destination guest physical address */
+ uint64_t flags, /* flags */
+ uint64_t order) /* page size order */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_BUSY if page cannot be currently paged-in.
+ * U_FUNCTION if functionality is not supported
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``src_ra`` is invalid.
+ * U_P3 if the ``dest_gpa`` address is invalid.
+ * U_P4 if any bit in the ``flags`` is unrecognized
+ * U_P5 if the ``order`` parameter is unsupported.
+
+Description
+~~~~~~~~~~~
+
+ Move the contents of the page identified by ``src_ra`` from normal
+ memory to secure memory and map it to the guest physical address
+ ``dest_gpa``.
+
+ If `dest_gpa` refers to a shared address, map the page into the
+ partition-scoped page-table of the SVM. If `dest_gpa` is not shared,
+ copy the contents of the page into the corresponding secure page.
+ Depending on the context, decrypt the page before being copied.
+
+ The caller provides the attributes of the page through the ``flags``
+ parameter. Valid values for ``flags`` are:
+
+ * CACHE_INHIBITED
+ * CACHE_ENABLED
+ * WRITE_PROTECTION
+
+ The Hypervisor must pin the page in memory before making
+ ``UV_PAGE_IN`` ultracall.
+
+Use cases
+~~~~~~~~~
+
+ #. When a normal VM switches to secure mode, all its pages residing
+ in normal memory, are moved into secure memory.
+
+ #. When an SVM requests to share a page with Hypervisor the Hypervisor
+ allocates a page and informs the Ultravisor.
+
+ #. When an SVM accesses a secure page that has been paged-out,
+ Ultravisor invokes the Hypervisor to locate the page. After
+ locating the page, the Hypervisor uses UV_PAGE_IN to make the
+ page available to Ultravisor.
+
+UV_PAGE_INVAL
+-------------
+
+ Invalidate the Ultravisor mapping of a page.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_PAGE_INVAL,
+ uint16_t lpid, /* the LPAR ID */
+ uint64_t guest_pa, /* destination guest-physical-address */
+ uint64_t order) /* page size order */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``guest_pa`` is invalid (or corresponds to a secure
+ page mapping).
+ * U_P3 if the ``order`` is invalid.
+ * U_FUNCTION if functionality is not supported.
+ * U_BUSY if page cannot be currently invalidated.
+
+Description
+~~~~~~~~~~~
+
+ This ultracall informs Ultravisor that the page mapping in Hypervisor
+ corresponding to the given guest physical address has been invalidated
+ and that the Ultravisor should not access the page. If the specified
+ ``guest_pa`` corresponds to a secure page, Ultravisor will ignore the
+ attempt to invalidate the page and return U_P2.
+
+Use cases
+~~~~~~~~~
+
+ #. When a shared page is unmapped from the QEMU's page table, possibly
+ because it is paged-out to disk, Ultravisor needs to know that the
+ page should not be accessed from its side too.
+
+
+UV_WRITE_PATE
+-------------
+
+ Validate and write the partition table entry (PATE) for a given
+ partition.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_WRITE_PATE,
+ uint32_t lpid, /* the LPAR ID */
+ uint64_t dw0 /* the first double word to write */
+ uint64_t dw1) /* the second double word to write */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_BUSY if PATE cannot be currently written to.
+ * U_FUNCTION if functionality is not supported.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``dw0`` is invalid.
+ * U_P3 if the ``dw1`` address is invalid.
+ * U_PERMISSION if the Hypervisor is attempting to change the PATE
+ of a secure virtual machine or if called from a
+ context other than Hypervisor.
+
+Description
+~~~~~~~~~~~
+
+ Validate and write a LPID and its partition-table-entry for the given
+ LPID. If the LPID is already allocated and initialized, this call
+ results in changing the partition table entry.
+
+Use cases
+~~~~~~~~~
+
+ #. The Partition table resides in Secure memory and its entries,
+ called PATE (Partition Table Entries), point to the partition-
+ scoped page tables for the Hypervisor as well as each of the
+ virtual machines (both secure and normal). The Hypervisor
+ operates in partition 0 and its partition-scoped page tables
+ reside in normal memory.
+
+ #. This ultracall allows the Hypervisor to register the partition-
+ scoped and process-scoped page table entries for the Hypervisor
+ and other partitions (virtual machines) with the Ultravisor.
+
+ #. If the value of the PATE for an existing partition (VM) changes,
+ the TLB cache for the partition is flushed.
+
+ #. The Hypervisor is responsible for allocating LPID. The LPID and
+ its PATE entry are registered together. The Hypervisor manages
+ the PATE entries for a normal VM and can change the PATE entry
+ anytime. Ultravisor manages the PATE entries for an SVM and
+ Hypervisor is not allowed to modify them.
+
+UV_RETURN
+---------
+
+ Return control from the Hypervisor back to the Ultravisor after
+ processing an hypercall or interrupt that was forwarded (aka
+ *reflected*) to the Hypervisor.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_RETURN)
+
+Return values
+~~~~~~~~~~~~~
+
+ This call never returns to Hypervisor on success. It returns
+ U_INVALID if ultracall is not made from a Hypervisor context.
+
+Description
+~~~~~~~~~~~
+
+ When an SVM makes an hypercall or incurs some other exception, the
+ Ultravisor usually forwards (aka *reflects*) the exceptions to the
+ Hypervisor. After processing the exception, Hypervisor uses the
+ ``UV_RETURN`` ultracall to return control back to the SVM.
+
+ The expected register state on entry to this ultracall is:
+
+ * Non-volatile registers are restored to their original values.
+ * If returning from an hypercall, register R0 contains the return
+ value (**unlike other ultracalls**) and, registers R4 through R12
+ contain any output values of the hypercall.
+ * R3 contains the ultracall number, i.e UV_RETURN.
+ * If returning with a synthesized interrupt, R2 contains the
+ synthesized interrupt number.
+
+Use cases
+~~~~~~~~~
+
+ #. Ultravisor relies on the Hypervisor to provide several services to
+ the SVM such as processing hypercall and other exceptions. After
+ processing the exception, Hypervisor uses UV_RETURN to return
+ control back to the Ultravisor.
+
+ #. Hypervisor has to use this ultracall to return control to the SVM.
+
+
+UV_REGISTER_MEM_SLOT
+--------------------
+
+ Register an SVM address-range with specified properties.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_REGISTER_MEM_SLOT,
+ uint64_t lpid, /* LPAR ID of the SVM */
+ uint64_t start_gpa, /* start guest physical address */
+ uint64_t size, /* size of address range in bytes */
+ uint64_t flags /* reserved for future expansion */
+ uint16_t slotid) /* slot identifier */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``start_gpa`` is invalid.
+ * U_P3 if ``size`` is invalid.
+ * U_P4 if any bit in the ``flags`` is unrecognized.
+ * U_P5 if the ``slotid`` parameter is unsupported.
+ * U_PERMISSION if called from context other than Hypervisor.
+ * U_FUNCTION if functionality is not supported.
+
+
+Description
+~~~~~~~~~~~
+
+ Register a memory range for an SVM. The memory range starts at the
+ guest physical address ``start_gpa`` and is ``size`` bytes long.
+
+Use cases
+~~~~~~~~~
+
+
+ #. When a virtual machine goes secure, all the memory slots managed by
+ the Hypervisor move into secure memory. The Hypervisor iterates
+ through each of memory slots, and registers the slot with
+ Ultravisor. Hypervisor may discard some slots such as those used
+ for firmware (SLOF).
+
+ #. When new memory is hot-plugged, a new memory slot gets registered.
+
+
+UV_UNREGISTER_MEM_SLOT
+----------------------
+
+ Unregister an SVM address-range that was previously registered using
+ UV_REGISTER_MEM_SLOT.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_UNREGISTER_MEM_SLOT,
+ uint64_t lpid, /* LPAR ID of the SVM */
+ uint64_t slotid) /* reservation slotid */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_FUNCTION if functionality is not supported.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_P2 if ``slotid`` is invalid.
+ * U_PERMISSION if called from context other than Hypervisor.
+
+Description
+~~~~~~~~~~~
+
+ Release the memory slot identified by ``slotid`` and free any
+ resources allocated towards the reservation.
+
+Use cases
+~~~~~~~~~
+
+ #. Memory hot-remove.
+
+
+UV_SVM_TERMINATE
+----------------
+
+ Terminate an SVM and release its resources.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_SVM_TERMINATE,
+ uint64_t lpid, /* LPAR ID of the SVM */)
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_FUNCTION if functionality is not supported.
+ * U_PARAMETER if ``lpid`` is invalid.
+ * U_INVALID if VM is not secure.
+ * U_PERMISSION if not called from a Hypervisor context.
+
+Description
+~~~~~~~~~~~
+
+ Terminate an SVM and release all its resources.
+
+Use cases
+~~~~~~~~~
+
+ #. Called by Hypervisor when terminating an SVM.
+
+
+Ultracalls used by SVM
+======================
+
+UV_SHARE_PAGE
+-------------
+
+ Share a set of guest physical pages with the Hypervisor.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_SHARE_PAGE,
+ uint64_t gfn, /* guest page frame number */
+ uint64_t num) /* number of pages of size PAGE_SIZE */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_FUNCTION if functionality is not supported.
+ * U_INVALID if the VM is not secure.
+ * U_PARAMETER if ``gfn`` is invalid.
+ * U_P2 if ``num`` is invalid.
+
+Description
+~~~~~~~~~~~
+
+ Share the ``num`` pages starting at guest physical frame number ``gfn``
+ with the Hypervisor. Assume page size is PAGE_SIZE bytes. Zero the
+ pages before returning.
+
+ If the address is already backed by a secure page, unmap the page and
+ back it with an insecure page, with the help of the Hypervisor. If it
+ is not backed by any page yet, mark the PTE as insecure and back it
+ with an insecure page when the address is accessed. If it is already
+ backed by an insecure page, zero the page and return.
+
+Use cases
+~~~~~~~~~
+
+ #. The Hypervisor cannot access the SVM pages since they are backed by
+ secure pages. Hence an SVM must explicitly request Ultravisor for
+ pages it can share with Hypervisor.
+
+ #. Shared pages are needed to support virtio and Virtual Processor Area
+ (VPA) in SVMs.
+
+
+UV_UNSHARE_PAGE
+---------------
+
+ Restore a shared SVM page to its initial state.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_UNSHARE_PAGE,
+ uint64_t gfn, /* guest page frame number */
+ uint73 num) /* number of pages of size PAGE_SIZE*/
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_FUNCTION if functionality is not supported.
+ * U_INVALID if VM is not secure.
+ * U_PARAMETER if ``gfn`` is invalid.
+ * U_P2 if ``num`` is invalid.
+
+Description
+~~~~~~~~~~~
+
+ Stop sharing ``num`` pages starting at ``gfn`` with the Hypervisor.
+ Assume that the page size is PAGE_SIZE. Zero the pages before
+ returning.
+
+ If the address is already backed by an insecure page, unmap the page
+ and back it with a secure page. Inform the Hypervisor to release
+ reference to its shared page. If the address is not backed by a page
+ yet, mark the PTE as secure and back it with a secure page when that
+ address is accessed. If it is already backed by an secure page zero
+ the page and return.
+
+Use cases
+~~~~~~~~~
+
+ #. The SVM may decide to unshare a page from the Hypervisor.
+
+
+UV_UNSHARE_ALL_PAGES
+--------------------
+
+ Unshare all pages the SVM has shared with Hypervisor.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_UNSHARE_ALL_PAGES)
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success.
+ * U_FUNCTION if functionality is not supported.
+ * U_INVAL if VM is not secure.
+
+Description
+~~~~~~~~~~~
+
+ Unshare all shared pages from the Hypervisor. All unshared pages are
+ zeroed on return. Only pages explicitly shared by the SVM with the
+ Hypervisor (using UV_SHARE_PAGE ultracall) are unshared. Ultravisor
+ may internally share some pages with the Hypervisor without explicit
+ request from the SVM. These pages will not be unshared by this
+ ultracall.
+
+Use cases
+~~~~~~~~~
+
+ #. This call is needed when ``kexec`` is used to boot a different
+ kernel. It may also be needed during SVM reset.
+
+UV_ESM
+------
+
+ Secure the virtual machine (*enter secure mode*).
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t ultracall(const uint64_t UV_ESM,
+ uint64_t esm_blob_addr, /* location of the ESM blob */
+ unint64_t fdt) /* Flattened device tree */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * U_SUCCESS on success (including if VM is already secure).
+ * U_FUNCTION if functionality is not supported.
+ * U_INVALID if VM is not secure.
+ * U_PARAMETER if ``esm_blob_addr`` is invalid.
+ * U_P2 if ``fdt`` is invalid.
+ * U_PERMISSION if any integrity checks fail.
+ * U_RETRY insufficient memory to create SVM.
+ * U_NO_KEY symmetric key unavailable.
+
+Description
+~~~~~~~~~~~
+
+ Secure the virtual machine. On successful completion, return
+ control to the virtual machine at the address specified in the
+ ESM blob.
+
+Use cases
+~~~~~~~~~
+
+ #. A normal virtual machine can choose to switch to a secure mode.
+
+Hypervisor Calls API
+####################
+
+ This document describes the Hypervisor calls (hypercalls) that are
+ needed to support the Ultravisor. Hypercalls are services provided by
+ the Hypervisor to virtual machines and Ultravisor.
+
+ Register usage for these hypercalls is identical to that of the other
+ hypercalls defined in the Power Architecture Platform Reference (PAPR)
+ document. i.e on input, register R3 identifies the specific service
+ that is being requested and registers R4 through R11 contain
+ additional parameters to the hypercall, if any. On output, register
+ R3 contains the return value and registers R4 through R9 contain any
+ other output values from the hypercall.
+
+ This document only covers hypercalls currently implemented/planned
+ for Ultravisor usage but others can be added here when it makes sense.
+
+ The full specification for all hypercalls/ultracalls will eventually
+ be made available in the public/OpenPower version of the PAPR
+ specification.
+
+Hypervisor calls to support Ultravisor
+======================================
+
+ Following are the set of hypercalls needed to support Ultravisor.
+
+H_SVM_INIT_START
+----------------
+
+ Begin the process of converting a normal virtual machine into an SVM.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t hypercall(const uint64_t H_SVM_INIT_START)
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * H_SUCCESS on success.
+ * H_STATE if the VM is not in a position to switch to secure.
+
+Description
+~~~~~~~~~~~
+
+ Initiate the process of securing a virtual machine. This involves
+ coordinating with the Ultravisor, using ultracalls, to allocate
+ resources in the Ultravisor for the new SVM, transferring the VM's
+ pages from normal to secure memory etc. When the process is
+ completed, Ultravisor issues the H_SVM_INIT_DONE hypercall.
+
+Use cases
+~~~~~~~~~
+
+ #. Ultravisor uses this hypercall to inform Hypervisor that a VM
+ has initiated the process of switching to secure mode.
+
+
+H_SVM_INIT_DONE
+---------------
+
+ Complete the process of securing an SVM.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t hypercall(const uint64_t H_SVM_INIT_DONE)
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * H_SUCCESS on success.
+ * H_UNSUPPORTED if called from the wrong context (e.g.
+ from an SVM or before an H_SVM_INIT_START
+ hypercall).
+ * H_STATE if the hypervisor could not successfully
+ transition the VM to Secure VM.
+
+Description
+~~~~~~~~~~~
+
+ Complete the process of securing a virtual machine. This call must
+ be made after a prior call to ``H_SVM_INIT_START`` hypercall.
+
+Use cases
+~~~~~~~~~
+
+ On successfully securing a virtual machine, the Ultravisor informs
+ Hypervisor about it. Hypervisor can use this call to finish setting
+ up its internal state for this virtual machine.
+
+
+H_SVM_INIT_ABORT
+----------------
+
+ Abort the process of securing an SVM.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t hypercall(const uint64_t H_SVM_INIT_ABORT)
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * H_PARAMETER on successfully cleaning up the state,
+ Hypervisor will return this value to the
+ **guest**, to indicate that the underlying
+ UV_ESM ultracall failed.
+
+ * H_STATE if called after a VM has gone secure (i.e
+ H_SVM_INIT_DONE hypercall was successful).
+
+ * H_UNSUPPORTED if called from a wrong context (e.g. from a
+ normal VM).
+
+Description
+~~~~~~~~~~~
+
+ Abort the process of securing a virtual machine. This call must
+ be made after a prior call to ``H_SVM_INIT_START`` hypercall and
+ before a call to ``H_SVM_INIT_DONE``.
+
+ On entry into this hypercall the non-volatile GPRs and FPRs are
+ expected to contain the values they had at the time the VM issued
+ the UV_ESM ultracall. Further ``SRR0`` is expected to contain the
+ address of the instruction after the ``UV_ESM`` ultracall and ``SRR1``
+ the MSR value with which to return to the VM.
+
+ This hypercall will cleanup any partial state that was established for
+ the VM since the prior ``H_SVM_INIT_START`` hypercall, including paging
+ out pages that were paged-into secure memory, and issue the
+ ``UV_SVM_TERMINATE`` ultracall to terminate the VM.
+
+ After the partial state is cleaned up, control returns to the VM
+ (**not Ultravisor**), at the address specified in ``SRR0`` with the
+ MSR values set to the value in ``SRR1``.
+
+Use cases
+~~~~~~~~~
+
+ If after a successful call to ``H_SVM_INIT_START``, the Ultravisor
+ encounters an error while securing a virtual machine, either due
+ to lack of resources or because the VM's security information could
+ not be validated, Ultravisor informs the Hypervisor about it.
+ Hypervisor should use this call to clean up any internal state for
+ this virtual machine and return to the VM.
+
+H_SVM_PAGE_IN
+-------------
+
+ Move the contents of a page from normal memory to secure memory.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t hypercall(const uint64_t H_SVM_PAGE_IN,
+ uint64_t guest_pa, /* guest-physical-address */
+ uint64_t flags, /* flags */
+ uint64_t order) /* page size order */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * H_SUCCESS on success.
+ * H_PARAMETER if ``guest_pa`` is invalid.
+ * H_P2 if ``flags`` is invalid.
+ * H_P3 if ``order`` of page is invalid.
+
+Description
+~~~~~~~~~~~
+
+ Retrieve the content of the page, belonging to the VM at the specified
+ guest physical address.
+
+ Only valid value(s) in ``flags`` are:
+
+ * H_PAGE_IN_SHARED which indicates that the page is to be shared
+ with the Ultravisor.
+
+ * H_PAGE_IN_NONSHARED indicates that the UV is not anymore
+ interested in the page. Applicable if the page is a shared page.
+
+ The ``order`` parameter must correspond to the configured page size.
+
+Use cases
+~~~~~~~~~
+
+ #. When a normal VM becomes a secure VM (using the UV_ESM ultracall),
+ the Ultravisor uses this hypercall to move contents of each page of
+ the VM from normal memory to secure memory.
+
+ #. Ultravisor uses this hypercall to ask Hypervisor to provide a page
+ in normal memory that can be shared between the SVM and Hypervisor.
+
+ #. Ultravisor uses this hypercall to page-in a paged-out page. This
+ can happen when the SVM touches a paged-out page.
+
+ #. If SVM wants to disable sharing of pages with Hypervisor, it can
+ inform Ultravisor to do so. Ultravisor will then use this hypercall
+ and inform Hypervisor that it has released access to the normal
+ page.
+
+H_SVM_PAGE_OUT
+---------------
+
+ Move the contents of the page to normal memory.
+
+Syntax
+~~~~~~
+
+.. code-block:: c
+
+ uint64_t hypercall(const uint64_t H_SVM_PAGE_OUT,
+ uint64_t guest_pa, /* guest-physical-address */
+ uint64_t flags, /* flags (currently none) */
+ uint64_t order) /* page size order */
+
+Return values
+~~~~~~~~~~~~~
+
+ One of the following values:
+
+ * H_SUCCESS on success.
+ * H_PARAMETER if ``guest_pa`` is invalid.
+ * H_P2 if ``flags`` is invalid.
+ * H_P3 if ``order`` is invalid.
+
+Description
+~~~~~~~~~~~
+
+ Move the contents of the page identified by ``guest_pa`` to normal
+ memory.
+
+ Currently ``flags`` is unused and must be set to 0. The ``order``
+ parameter must correspond to the configured page size.
+
+Use cases
+~~~~~~~~~
+
+ #. If Ultravisor is running low on secure pages, it can move the
+ contents of some secure pages, into normal pages using this
+ hypercall. The content will be encrypted.
+
+References
+##########
+
+- `Supporting Protected Computing on IBM Power Architecture <https://developer.ibm.com/articles/l-support-protected-computing/>`_
diff --git a/Documentation/arch/powerpc/vas-api.rst b/Documentation/arch/powerpc/vas-api.rst
new file mode 100644
index 0000000000..a9625a2fa0
--- /dev/null
+++ b/Documentation/arch/powerpc/vas-api.rst
@@ -0,0 +1,305 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _VAS-API:
+
+===================================================
+Virtual Accelerator Switchboard (VAS) userspace API
+===================================================
+
+Introduction
+============
+
+Power9 processor introduced Virtual Accelerator Switchboard (VAS) which
+allows both userspace and kernel communicate to co-processor
+(hardware accelerator) referred to as the Nest Accelerator (NX). The NX
+unit comprises of one or more hardware engines or co-processor types
+such as 842 compression, GZIP compression and encryption. On power9,
+userspace applications will have access to only GZIP Compression engine
+which supports ZLIB and GZIP compression algorithms in the hardware.
+
+To communicate with NX, kernel has to establish a channel or window and
+then requests can be submitted directly without kernel involvement.
+Requests to the GZIP engine must be formatted as a co-processor Request
+Block (CRB) and these CRBs must be submitted to the NX using COPY/PASTE
+instructions to paste the CRB to hardware address that is associated with
+the engine's request queue.
+
+The GZIP engine provides two priority levels of requests: Normal and
+High. Only Normal requests are supported from userspace right now.
+
+This document explains userspace API that is used to interact with
+kernel to setup channel / window which can be used to send compression
+requests directly to NX accelerator.
+
+
+Overview
+========
+
+Application access to the GZIP engine is provided through
+/dev/crypto/nx-gzip device node implemented by the VAS/NX device driver.
+An application must open the /dev/crypto/nx-gzip device to obtain a file
+descriptor (fd). Then should issue VAS_TX_WIN_OPEN ioctl with this fd to
+establish connection to the engine. It means send window is opened on GZIP
+engine for this process. Once a connection is established, the application
+should use the mmap() system call to map the hardware address of engine's
+request queue into the application's virtual address space.
+
+The application can then submit one or more requests to the engine by
+using copy/paste instructions and pasting the CRBs to the virtual address
+(aka paste_address) returned by mmap(). User space can close the
+established connection or send window by closing the file descriptor
+(close(fd)) or upon the process exit.
+
+Note that applications can send several requests with the same window or
+can establish multiple windows, but one window for each file descriptor.
+
+Following sections provide additional details and references about the
+individual steps.
+
+NX-GZIP Device Node
+===================
+
+There is one /dev/crypto/nx-gzip node in the system and it provides
+access to all GZIP engines in the system. The only valid operations on
+/dev/crypto/nx-gzip are:
+
+ * open() the device for read and write.
+ * issue VAS_TX_WIN_OPEN ioctl
+ * mmap() the engine's request queue into application's virtual
+ address space (i.e. get a paste_address for the co-processor
+ engine).
+ * close the device node.
+
+Other file operations on this device node are undefined.
+
+Note that the copy and paste operations go directly to the hardware and
+do not go through this device. Refer COPY/PASTE document for more
+details.
+
+Although a system may have several instances of the NX co-processor
+engines (typically, one per P9 chip) there is just one
+/dev/crypto/nx-gzip device node in the system. When the nx-gzip device
+node is opened, Kernel opens send window on a suitable instance of NX
+accelerator. It finds CPU on which the user process is executing and
+determine the NX instance for the corresponding chip on which this CPU
+belongs.
+
+Applications may chose a specific instance of the NX co-processor using
+the vas_id field in the VAS_TX_WIN_OPEN ioctl as detailed below.
+
+A userspace library libnxz is available here but still in development:
+
+ https://github.com/abalib/power-gzip
+
+Applications that use inflate / deflate calls can link with libnxz
+instead of libz and use NX GZIP compression without any modification.
+
+Open /dev/crypto/nx-gzip
+========================
+
+The nx-gzip device should be opened for read and write. No special
+privileges are needed to open the device. Each window corresponds to one
+file descriptor. So if the userspace process needs multiple windows,
+several open calls have to be issued.
+
+See open(2) system call man pages for other details such as return values,
+error codes and restrictions.
+
+VAS_TX_WIN_OPEN ioctl
+=====================
+
+Applications should use the VAS_TX_WIN_OPEN ioctl as follows to establish
+a connection with NX co-processor engine:
+
+ ::
+
+ struct vas_tx_win_open_attr {
+ __u32 version;
+ __s16 vas_id; /* specific instance of vas or -1
+ for default */
+ __u16 reserved1;
+ __u64 flags; /* For future use */
+ __u64 reserved2[6];
+ };
+
+ version:
+ The version field must be currently set to 1.
+ vas_id:
+ If '-1' is passed, kernel will make a best-effort attempt
+ to assign an optimal instance of NX for the process. To
+ select the specific VAS instance, refer
+ "Discovery of available VAS engines" section below.
+
+ flags, reserved1 and reserved2[6] fields are for future extension
+ and must be set to 0.
+
+ The attributes attr for the VAS_TX_WIN_OPEN ioctl are defined as
+ follows::
+
+ #define VAS_MAGIC 'v'
+ #define VAS_TX_WIN_OPEN _IOW(VAS_MAGIC, 1,
+ struct vas_tx_win_open_attr)
+
+ struct vas_tx_win_open_attr attr;
+ rc = ioctl(fd, VAS_TX_WIN_OPEN, &attr);
+
+ The VAS_TX_WIN_OPEN ioctl returns 0 on success. On errors, it
+ returns -1 and sets the errno variable to indicate the error.
+
+ Error conditions:
+
+ ====== ================================================
+ EINVAL fd does not refer to a valid VAS device.
+ EINVAL Invalid vas ID
+ EINVAL version is not set with proper value
+ EEXIST Window is already opened for the given fd
+ ENOMEM Memory is not available to allocate window
+ ENOSPC System has too many active windows (connections)
+ opened
+ EINVAL reserved fields are not set to 0.
+ ====== ================================================
+
+ See the ioctl(2) man page for more details, error codes and
+ restrictions.
+
+mmap() NX-GZIP device
+=====================
+
+The mmap() system call for a NX-GZIP device fd returns a paste_address
+that the application can use to copy/paste its CRB to the hardware engines.
+
+ ::
+
+ paste_addr = mmap(addr, size, prot, flags, fd, offset);
+
+ Only restrictions on mmap for a NX-GZIP device fd are:
+
+ * size should be PAGE_SIZE
+ * offset parameter should be 0ULL
+
+ Refer to mmap(2) man page for additional details/restrictions.
+ In addition to the error conditions listed on the mmap(2) man
+ page, can also fail with one of the following error codes:
+
+ ====== =============================================
+ EINVAL fd is not associated with an open window
+ (i.e mmap() does not follow a successful call
+ to the VAS_TX_WIN_OPEN ioctl).
+ EINVAL offset field is not 0ULL.
+ ====== =============================================
+
+Discovery of available VAS engines
+==================================
+
+Each available VAS instance in the system will have a device tree node
+like /proc/device-tree/vas@* or /proc/device-tree/xscom@*/vas@*.
+Determine the chip or VAS instance and use the corresponding ibm,vas-id
+property value in this node to select specific VAS instance.
+
+Copy/Paste operations
+=====================
+
+Applications should use the copy and paste instructions to send CRB to NX.
+Refer section 4.4 in PowerISA for Copy/Paste instructions:
+https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0
+
+CRB Specification and use NX
+============================
+
+Applications should format requests to the co-processor using the
+co-processor Request Block (CRBs). Refer NX-GZIP user's manual for the format
+of CRB and use NX from userspace such as sending requests and checking
+request status.
+
+NX Fault handling
+=================
+
+Applications send requests to NX and wait for the status by polling on
+co-processor Status Block (CSB) flags. NX updates status in CSB after each
+request is processed. Refer NX-GZIP user's manual for the format of CSB and
+status flags.
+
+In case if NX encounters translation error (called NX page fault) on CSB
+address or any request buffer, raises an interrupt on the CPU to handle the
+fault. Page fault can happen if an application passes invalid addresses or
+request buffers are not in memory. The operating system handles the fault by
+updating CSB with the following data::
+
+ csb.flags = CSB_V;
+ csb.cc = CSB_CC_FAULT_ADDRESS;
+ csb.ce = CSB_CE_TERMINATION;
+ csb.address = fault_address;
+
+When an application receives translation error, it can touch or access
+the page that has a fault address so that this page will be in memory. Then
+the application can resend this request to NX.
+
+If the OS can not update CSB due to invalid CSB address, sends SEGV signal
+to the process who opened the send window on which the original request was
+issued. This signal returns with the following siginfo struct::
+
+ siginfo.si_signo = SIGSEGV;
+ siginfo.si_errno = EFAULT;
+ siginfo.si_code = SEGV_MAPERR;
+ siginfo.si_addr = CSB address;
+
+In the case of multi-thread applications, NX send windows can be shared
+across all threads. For example, a child thread can open a send window,
+but other threads can send requests to NX using this window. These
+requests will be successful even in the case of OS handling faults as long
+as CSB address is valid. If the NX request contains an invalid CSB address,
+the signal will be sent to the child thread that opened the window. But if
+the thread is exited without closing the window and the request is issued
+using this window. the signal will be issued to the thread group leader
+(tgid). It is up to the application whether to ignore or handle these
+signals.
+
+NX-GZIP User's Manual:
+https://github.com/libnxz/power-gzip/blob/master/doc/power_nx_gzip_um.pdf
+
+Simple example
+==============
+
+ ::
+
+ int use_nx_gzip()
+ {
+ int rc, fd;
+ void *addr;
+ struct vas_setup_attr txattr;
+
+ fd = open("/dev/crypto/nx-gzip", O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "open nx-gzip failed\n");
+ return -1;
+ }
+ memset(&txattr, 0, sizeof(txattr));
+ txattr.version = 1;
+ txattr.vas_id = -1
+ rc = ioctl(fd, VAS_TX_WIN_OPEN,
+ (unsigned long)&txattr);
+ if (rc < 0) {
+ fprintf(stderr, "ioctl() n %d, error %d\n",
+ rc, errno);
+ return rc;
+ }
+ addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
+ MAP_SHARED, fd, 0ULL);
+ if (addr == MAP_FAILED) {
+ fprintf(stderr, "mmap() failed, errno %d\n",
+ errno);
+ return -errno;
+ }
+ do {
+ //Format CRB request with compression or
+ //uncompression
+ // Refer tests for vas_copy/vas_paste
+ vas_copy((&crb, 0, 1);
+ vas_paste(addr, 0, 1);
+ // Poll on csb.flags with timeout
+ // csb address is listed in CRB
+ } while (true)
+ close(fd) or window can be closed upon process exit
+ }
+
+ Refer https://github.com/libnxz/power-gzip for tests or more
+ use cases.
diff --git a/Documentation/arch/powerpc/vcpudispatch_stats.rst b/Documentation/arch/powerpc/vcpudispatch_stats.rst
new file mode 100644
index 0000000000..5704657a59
--- /dev/null
+++ b/Documentation/arch/powerpc/vcpudispatch_stats.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+VCPU Dispatch Statistics
+========================
+
+For Shared Processor LPARs, the POWER Hypervisor maintains a relatively
+static mapping of the LPAR processors (vcpus) to physical processor
+chips (representing the "home" node) and tries to always dispatch vcpus
+on their associated physical processor chip. However, under certain
+scenarios, vcpus may be dispatched on a different processor chip (away
+from its home node).
+
+/proc/powerpc/vcpudispatch_stats can be used to obtain statistics
+related to the vcpu dispatch behavior. Writing '1' to this file enables
+collecting the statistics, while writing '0' disables the statistics.
+By default, the DTLB log for each vcpu is processed 50 times a second so
+as not to miss any entries. This processing frequency can be changed
+through /proc/powerpc/vcpudispatch_stats_freq.
+
+The statistics themselves are available by reading the procfs file
+/proc/powerpc/vcpudispatch_stats. Each line in the output corresponds to
+a vcpu as represented by the first field, followed by 8 numbers.
+
+The first number corresponds to:
+
+1. total vcpu dispatches since the beginning of statistics collection
+
+The next 4 numbers represent vcpu dispatch dispersions:
+
+2. number of times this vcpu was dispatched on the same processor as last
+ time
+3. number of times this vcpu was dispatched on a different processor core
+ as last time, but within the same chip
+4. number of times this vcpu was dispatched on a different chip
+5. number of times this vcpu was dispatches on a different socket/drawer
+ (next numa boundary)
+
+The final 3 numbers represent statistics in relation to the home node of
+the vcpu:
+
+6. number of times this vcpu was dispatched in its home node (chip)
+7. number of times this vcpu was dispatched in a different node
+8. number of times this vcpu was dispatched in a node further away (numa
+ distance)
+
+An example output::
+
+ $ sudo cat /proc/powerpc/vcpudispatch_stats
+ cpu0 6839 4126 2683 30 0 6821 18 0
+ cpu1 2515 1274 1229 12 0 2509 6 0
+ cpu2 2317 1198 1109 10 0 2312 5 0
+ cpu3 2259 1165 1088 6 0 2256 3 0
+ cpu4 2205 1143 1056 6 0 2202 3 0
+ cpu5 2165 1121 1038 6 0 2162 3 0
+ cpu6 2183 1127 1050 6 0 2180 3 0
+ cpu7 2193 1133 1052 8 0 2187 6 0
+ cpu8 2165 1115 1032 18 0 2156 9 0
+ cpu9 2301 1252 1033 16 0 2293 8 0
+ cpu10 2197 1138 1041 18 0 2187 10 0
+ cpu11 2273 1185 1062 26 0 2260 13 0
+ cpu12 2186 1125 1043 18 0 2177 9 0
+ cpu13 2161 1115 1030 16 0 2153 8 0
+ cpu14 2206 1153 1033 20 0 2196 10 0
+ cpu15 2163 1115 1032 16 0 2155 8 0
+
+In the output above, for vcpu0, there have been 6839 dispatches since
+statistics were enabled. 4126 of those dispatches were on the same
+physical cpu as the last time. 2683 were on a different core, but within
+the same chip, while 30 dispatches were on a different chip compared to
+its last dispatch.
+
+Also, out of the total of 6839 dispatches, we see that there have been
+6821 dispatches on the vcpu's home node, while 18 dispatches were
+outside its home node, on a neighbouring chip.
diff --git a/Documentation/arch/powerpc/vmemmap_dedup.rst b/Documentation/arch/powerpc/vmemmap_dedup.rst
new file mode 100644
index 0000000000..dc4db59fdf
--- /dev/null
+++ b/Documentation/arch/powerpc/vmemmap_dedup.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========
+Device DAX
+==========
+
+The device-dax interface uses the tail deduplication technique explained in
+Documentation/mm/vmemmap_dedup.rst
+
+On powerpc, vmemmap deduplication is only used with radix MMU translation. Also
+with a 64K page size, only the devdax namespace with 1G alignment uses vmemmap
+deduplication.
+
+With 2M PMD level mapping, we require 32 struct pages and a single 64K vmemmap
+page can contain 1024 struct pages (64K/sizeof(struct page)). Hence there is no
+vmemmap deduplication possible.
+
+With 1G PUD level mapping, we require 16384 struct pages and a single 64K
+vmemmap page can contain 1024 struct pages (64K/sizeof(struct page)). Hence we
+require 16 64K pages in vmemmap to map the struct page for 1G PUD level mapping.
+
+Here's how things look like on device-dax after the sections are populated::
+ +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+
+ | | | 0 | -------------> | 0 |
+ | | +-----------+ +-----------+
+ | | | 1 | -------------> | 1 |
+ | | +-----------+ +-----------+
+ | | | 2 | ----------------^ ^ ^ ^ ^ ^
+ | | +-----------+ | | | | |
+ | | | 3 | ------------------+ | | | |
+ | | +-----------+ | | | |
+ | | | 4 | --------------------+ | | |
+ | PUD | +-----------+ | | |
+ | level | | . | ----------------------+ | |
+ | mapping | +-----------+ | |
+ | | | . | ------------------------+ |
+ | | +-----------+ |
+ | | | 15 | --------------------------+
+ | | +-----------+
+ | |
+ | |
+ | |
+ +-----------+
+
+
+With 4K page size, 2M PMD level mapping requires 512 struct pages and a single
+4K vmemmap page contains 64 struct pages(4K/sizeof(struct page)). Hence we
+require 8 4K pages in vmemmap to map the struct page for 2M pmd level mapping.
+
+Here's how things look like on device-dax after the sections are populated::
+
+ +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+
+ | | | 0 | -------------> | 0 |
+ | | +-----------+ +-----------+
+ | | | 1 | -------------> | 1 |
+ | | +-----------+ +-----------+
+ | | | 2 | ----------------^ ^ ^ ^ ^ ^
+ | | +-----------+ | | | | |
+ | | | 3 | ------------------+ | | | |
+ | | +-----------+ | | | |
+ | | | 4 | --------------------+ | | |
+ | PMD | +-----------+ | | |
+ | level | | 5 | ----------------------+ | |
+ | mapping | +-----------+ | |
+ | | | 6 | ------------------------+ |
+ | | +-----------+ |
+ | | | 7 | --------------------------+
+ | | +-----------+
+ | |
+ | |
+ | |
+ +-----------+
+
+With 1G PUD level mapping, we require 262144 struct pages and a single 4K
+vmemmap page can contain 64 struct pages (4K/sizeof(struct page)). Hence we
+require 4096 4K pages in vmemmap to map the struct pages for 1G PUD level
+mapping.
+
+Here's how things look like on device-dax after the sections are populated::
+
+ +-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+
+ | | | 0 | -------------> | 0 |
+ | | +-----------+ +-----------+
+ | | | 1 | -------------> | 1 |
+ | | +-----------+ +-----------+
+ | | | 2 | ----------------^ ^ ^ ^ ^ ^
+ | | +-----------+ | | | | |
+ | | | 3 | ------------------+ | | | |
+ | | +-----------+ | | | |
+ | | | 4 | --------------------+ | | |
+ | PUD | +-----------+ | | |
+ | level | | . | ----------------------+ | |
+ | mapping | +-----------+ | |
+ | | | . | ------------------------+ |
+ | | +-----------+ |
+ | | | 4095 | --------------------------+
+ | | +-----------+
+ | |
+ | |
+ | |
+ +-----------+