diff options
Diffstat (limited to 'Documentation/block/ioprio.rst')
| -rw-r--r-- | Documentation/block/ioprio.rst | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/Documentation/block/ioprio.rst b/Documentation/block/ioprio.rst new file mode 100644 index 0000000000..f72b0de65a --- /dev/null +++ b/Documentation/block/ioprio.rst @@ -0,0 +1,182 @@ +=================== +Block io priorities +=================== + + +Intro +----- + +With the introduction of cfq v3 (aka cfq-ts or time sliced cfq), basic io +priorities are supported for reads on files. This enables users to io nice +processes or process groups, similar to what has been possible with cpu +scheduling for ages. This document mainly details the current possibilities +with cfq; other io schedulers do not support io priorities thus far. + +Scheduling classes +------------------ + +CFQ implements three generic scheduling classes that determine how io is +served for a process. + +IOPRIO_CLASS_RT: This is the realtime io class. This scheduling class is given +higher priority than any other in the system, processes from this class are +given first access to the disk every time. Thus it needs to be used with some +care, one io RT process can starve the entire system. Within the RT class, +there are 8 levels of class data that determine exactly how much time this +process needs the disk for on each service. In the future this might change +to be more directly mappable to performance, by passing in a wanted data +rate instead. + +IOPRIO_CLASS_BE: This is the best-effort scheduling class, which is the default +for any process that hasn't set a specific io priority. The class data +determines how much io bandwidth the process will get, it's directly mappable +to the cpu nice levels just more coarsely implemented. 0 is the highest +BE prio level, 7 is the lowest. The mapping between cpu nice level and io +nice level is determined as: io_nice = (cpu_nice + 20) / 5. + +IOPRIO_CLASS_IDLE: This is the idle scheduling class, processes running at this +level only get io time when no one else needs the disk. The idle class has no +class data, since it doesn't really apply here. + +Tools +----- + +See below for a sample ionice tool. Usage:: + + # ionice -c<class> -n<level> -p<pid> + +If pid isn't given, the current process is assumed. IO priority settings +are inherited on fork, so you can use ionice to start the process at a given +level:: + + # ionice -c2 -n0 /bin/ls + +will run ls at the best-effort scheduling class at the highest priority. +For a running process, you can give the pid instead:: + + # ionice -c1 -n2 -p100 + +will change pid 100 to run at the realtime scheduling class, at priority 2. + +ionice.c tool:: + + #include <stdio.h> + #include <stdlib.h> + #include <errno.h> + #include <getopt.h> + #include <unistd.h> + #include <sys/ptrace.h> + #include <asm/unistd.h> + + extern int sys_ioprio_set(int, int, int); + extern int sys_ioprio_get(int, int); + + #if defined(__i386__) + #define __NR_ioprio_set 289 + #define __NR_ioprio_get 290 + #elif defined(__ppc__) + #define __NR_ioprio_set 273 + #define __NR_ioprio_get 274 + #elif defined(__x86_64__) + #define __NR_ioprio_set 251 + #define __NR_ioprio_get 252 + #elif defined(__ia64__) + #define __NR_ioprio_set 1274 + #define __NR_ioprio_get 1275 + #else + #error "Unsupported arch" + #endif + + static inline int ioprio_set(int which, int who, int ioprio) + { + return syscall(__NR_ioprio_set, which, who, ioprio); + } + + static inline int ioprio_get(int which, int who) + { + return syscall(__NR_ioprio_get, which, who); + } + + enum { + IOPRIO_CLASS_NONE, + IOPRIO_CLASS_RT, + IOPRIO_CLASS_BE, + IOPRIO_CLASS_IDLE, + }; + + enum { + IOPRIO_WHO_PROCESS = 1, + IOPRIO_WHO_PGRP, + IOPRIO_WHO_USER, + }; + + #define IOPRIO_CLASS_SHIFT 13 + + const char *to_prio[] = { "none", "realtime", "best-effort", "idle", }; + + int main(int argc, char *argv[]) + { + int ioprio = 4, set = 0, ioprio_class = IOPRIO_CLASS_BE; + int c, pid = 0; + + while ((c = getopt(argc, argv, "+n:c:p:")) != EOF) { + switch (c) { + case 'n': + ioprio = strtol(optarg, NULL, 10); + set = 1; + break; + case 'c': + ioprio_class = strtol(optarg, NULL, 10); + set = 1; + break; + case 'p': + pid = strtol(optarg, NULL, 10); + break; + } + } + + switch (ioprio_class) { + case IOPRIO_CLASS_NONE: + ioprio_class = IOPRIO_CLASS_BE; + break; + case IOPRIO_CLASS_RT: + case IOPRIO_CLASS_BE: + break; + case IOPRIO_CLASS_IDLE: + ioprio = 7; + break; + default: + printf("bad prio class %d\n", ioprio_class); + return 1; + } + + if (!set) { + if (!pid && argv[optind]) + pid = strtol(argv[optind], NULL, 10); + + ioprio = ioprio_get(IOPRIO_WHO_PROCESS, pid); + + printf("pid=%d, %d\n", pid, ioprio); + + if (ioprio == -1) + perror("ioprio_get"); + else { + ioprio_class = ioprio >> IOPRIO_CLASS_SHIFT; + ioprio = ioprio & 0xff; + printf("%s: prio %d\n", to_prio[ioprio_class], ioprio); + } + } else { + if (ioprio_set(IOPRIO_WHO_PROCESS, pid, ioprio | ioprio_class << IOPRIO_CLASS_SHIFT) == -1) { + perror("ioprio_set"); + return 1; + } + + if (argv[optind]) + execvp(argv[optind], &argv[optind]); + } + + return 0; + } + + +March 11 2005, Jens Axboe <jens.axboe@oracle.com> |