diff options
Diffstat (limited to '')
-rw-r--r-- | Documentation/bpf/standardization/instruction-set.rst | 605 |
1 files changed, 605 insertions, 0 deletions
diff --git a/Documentation/bpf/standardization/instruction-set.rst b/Documentation/bpf/standardization/instruction-set.rst new file mode 100644 index 0000000000..c5d53a6e8c --- /dev/null +++ b/Documentation/bpf/standardization/instruction-set.rst @@ -0,0 +1,605 @@ +.. contents:: +.. sectnum:: + +======================================= +BPF Instruction Set Specification, v1.0 +======================================= + +This document specifies version 1.0 of the BPF instruction set. + +Documentation conventions +========================= + +For brevity and consistency, this document refers to families +of types using a shorthand syntax and refers to several expository, +mnemonic functions when describing the semantics of instructions. +The range of valid values for those types and the semantics of those +functions are defined in the following subsections. + +Types +----- +This document refers to integer types with the notation `SN` to specify +a type's signedness (`S`) and bit width (`N`), respectively. + +.. table:: Meaning of signedness notation. + + ==== ========= + `S` Meaning + ==== ========= + `u` unsigned + `s` signed + ==== ========= + +.. table:: Meaning of bit-width notation. + + ===== ========= + `N` Bit width + ===== ========= + `8` 8 bits + `16` 16 bits + `32` 32 bits + `64` 64 bits + `128` 128 bits + ===== ========= + +For example, `u32` is a type whose valid values are all the 32-bit unsigned +numbers and `s16` is a types whose valid values are all the 16-bit signed +numbers. + +Functions +--------- +* `htobe16`: Takes an unsigned 16-bit number in host-endian format and + returns the equivalent number as an unsigned 16-bit number in big-endian + format. +* `htobe32`: Takes an unsigned 32-bit number in host-endian format and + returns the equivalent number as an unsigned 32-bit number in big-endian + format. +* `htobe64`: Takes an unsigned 64-bit number in host-endian format and + returns the equivalent number as an unsigned 64-bit number in big-endian + format. +* `htole16`: Takes an unsigned 16-bit number in host-endian format and + returns the equivalent number as an unsigned 16-bit number in little-endian + format. +* `htole32`: Takes an unsigned 32-bit number in host-endian format and + returns the equivalent number as an unsigned 32-bit number in little-endian + format. +* `htole64`: Takes an unsigned 64-bit number in host-endian format and + returns the equivalent number as an unsigned 64-bit number in little-endian + format. +* `bswap16`: Takes an unsigned 16-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. +* `bswap32`: Takes an unsigned 32-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. +* `bswap64`: Takes an unsigned 64-bit number in either big- or little-endian + format and returns the equivalent number with the same bit width but + opposite endianness. + + +Definitions +----------- + +.. glossary:: + + Sign Extend + To `sign extend an` ``X`` `-bit number, A, to a` ``Y`` `-bit number, B ,` means to + + #. Copy all ``X`` bits from `A` to the lower ``X`` bits of `B`. + #. Set the value of the remaining ``Y`` - ``X`` bits of `B` to the value of + the most-significant bit of `A`. + +.. admonition:: Example + + Sign extend an 8-bit number ``A`` to a 16-bit number ``B`` on a big-endian platform: + :: + + A: 10000110 + B: 11111111 10000110 + +Instruction encoding +==================== + +BPF has two instruction encodings: + +* the basic instruction encoding, which uses 64 bits to encode an instruction +* the wide instruction encoding, which appends a second 64-bit immediate (i.e., + constant) value after the basic instruction for a total of 128 bits. + +The fields conforming an encoded basic instruction are stored in the +following order:: + + opcode:8 src_reg:4 dst_reg:4 offset:16 imm:32 // In little-endian BPF. + opcode:8 dst_reg:4 src_reg:4 offset:16 imm:32 // In big-endian BPF. + +**imm** + signed integer immediate value + +**offset** + signed integer offset used with pointer arithmetic + +**src_reg** + the source register number (0-10), except where otherwise specified + (`64-bit immediate instructions`_ reuse this field for other purposes) + +**dst_reg** + destination register number (0-10) + +**opcode** + operation to perform + +Note that the contents of multi-byte fields ('imm' and 'offset') are +stored using big-endian byte ordering in big-endian BPF and +little-endian byte ordering in little-endian BPF. + +For example:: + + opcode offset imm assembly + src_reg dst_reg + 07 0 1 00 00 44 33 22 11 r1 += 0x11223344 // little + dst_reg src_reg + 07 1 0 00 00 11 22 33 44 r1 += 0x11223344 // big + +Note that most instructions do not use all of the fields. +Unused fields shall be cleared to zero. + +As discussed below in `64-bit immediate instructions`_, a 64-bit immediate +instruction uses a 64-bit immediate value that is constructed as follows. +The 64 bits following the basic instruction contain a pseudo instruction +using the same format but with opcode, dst_reg, src_reg, and offset all set to zero, +and imm containing the high 32 bits of the immediate value. + +This is depicted in the following figure:: + + basic_instruction + .-----------------------------. + | | + code:8 regs:8 offset:16 imm:32 unused:32 imm:32 + | | + '--------------' + pseudo instruction + +Thus the 64-bit immediate value is constructed as follows: + + imm64 = (next_imm << 32) | imm + +where 'next_imm' refers to the imm value of the pseudo instruction +following the basic instruction. The unused bytes in the pseudo +instruction are reserved and shall be cleared to zero. + +Instruction classes +------------------- + +The three LSB bits of the 'opcode' field store the instruction class: + +========= ===== =============================== =================================== +class value description reference +========= ===== =============================== =================================== +BPF_LD 0x00 non-standard load operations `Load and store instructions`_ +BPF_LDX 0x01 load into register operations `Load and store instructions`_ +BPF_ST 0x02 store from immediate operations `Load and store instructions`_ +BPF_STX 0x03 store from register operations `Load and store instructions`_ +BPF_ALU 0x04 32-bit arithmetic operations `Arithmetic and jump instructions`_ +BPF_JMP 0x05 64-bit jump operations `Arithmetic and jump instructions`_ +BPF_JMP32 0x06 32-bit jump operations `Arithmetic and jump instructions`_ +BPF_ALU64 0x07 64-bit arithmetic operations `Arithmetic and jump instructions`_ +========= ===== =============================== =================================== + +Arithmetic and jump instructions +================================ + +For arithmetic and jump instructions (``BPF_ALU``, ``BPF_ALU64``, ``BPF_JMP`` and +``BPF_JMP32``), the 8-bit 'opcode' field is divided into three parts: + +============== ====== ================= +4 bits (MSB) 1 bit 3 bits (LSB) +============== ====== ================= +code source instruction class +============== ====== ================= + +**code** + the operation code, whose meaning varies by instruction class + +**source** + the source operand location, which unless otherwise specified is one of: + + ====== ===== ============================================== + source value description + ====== ===== ============================================== + BPF_K 0x00 use 32-bit 'imm' value as source operand + BPF_X 0x08 use 'src_reg' register value as source operand + ====== ===== ============================================== + +**instruction class** + the instruction class (see `Instruction classes`_) + +Arithmetic instructions +----------------------- + +``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for +otherwise identical operations. +The 'code' field encodes the operation as below, where 'src' and 'dst' refer +to the values of the source and destination registers, respectively. + +========= ===== ======= ========================================================== +code value offset description +========= ===== ======= ========================================================== +BPF_ADD 0x00 0 dst += src +BPF_SUB 0x10 0 dst -= src +BPF_MUL 0x20 0 dst \*= src +BPF_DIV 0x30 0 dst = (src != 0) ? (dst / src) : 0 +BPF_SDIV 0x30 1 dst = (src != 0) ? (dst s/ src) : 0 +BPF_OR 0x40 0 dst \|= src +BPF_AND 0x50 0 dst &= src +BPF_LSH 0x60 0 dst <<= (src & mask) +BPF_RSH 0x70 0 dst >>= (src & mask) +BPF_NEG 0x80 0 dst = -dst +BPF_MOD 0x90 0 dst = (src != 0) ? (dst % src) : dst +BPF_SMOD 0x90 1 dst = (src != 0) ? (dst s% src) : dst +BPF_XOR 0xa0 0 dst ^= src +BPF_MOV 0xb0 0 dst = src +BPF_MOVSX 0xb0 8/16/32 dst = (s8,s16,s32)src +BPF_ARSH 0xc0 0 :term:`sign extending<Sign Extend>` dst >>= (src & mask) +BPF_END 0xd0 0 byte swap operations (see `Byte swap instructions`_ below) +========= ===== ======= ========================================================== + +Underflow and overflow are allowed during arithmetic operations, meaning +the 64-bit or 32-bit value will wrap. If BPF program execution would +result in division by zero, the destination register is instead set to zero. +If execution would result in modulo by zero, for ``BPF_ALU64`` the value of +the destination register is unchanged whereas for ``BPF_ALU`` the upper +32 bits of the destination register are zeroed. + +``BPF_ADD | BPF_X | BPF_ALU`` means:: + + dst = (u32) ((u32) dst + (u32) src) + +where '(u32)' indicates that the upper 32 bits are zeroed. + +``BPF_ADD | BPF_X | BPF_ALU64`` means:: + + dst = dst + src + +``BPF_XOR | BPF_K | BPF_ALU`` means:: + + dst = (u32) dst ^ (u32) imm32 + +``BPF_XOR | BPF_K | BPF_ALU64`` means:: + + dst = dst ^ imm32 + +Note that most instructions have instruction offset of 0. Only three instructions +(``BPF_SDIV``, ``BPF_SMOD``, ``BPF_MOVSX``) have a non-zero offset. + +The division and modulo operations support both unsigned and signed flavors. + +For unsigned operations (``BPF_DIV`` and ``BPF_MOD``), for ``BPF_ALU``, +'imm' is interpreted as a 32-bit unsigned value. For ``BPF_ALU64``, +'imm' is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then +interpreted as a 64-bit unsigned value. + +For signed operations (``BPF_SDIV`` and ``BPF_SMOD``), for ``BPF_ALU``, +'imm' is interpreted as a 32-bit signed value. For ``BPF_ALU64``, 'imm' +is first :term:`sign extended<Sign Extend>` from 32 to 64 bits, and then +interpreted as a 64-bit signed value. + +The ``BPF_MOVSX`` instruction does a move operation with sign extension. +``BPF_ALU | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit and 16-bit operands into 32 +bit operands, and zeroes the remaining upper 32 bits. +``BPF_ALU64 | BPF_MOVSX`` :term:`sign extends<Sign Extend>` 8-bit, 16-bit, and 32-bit +operands into 64 bit operands. + +Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31) +for 32-bit operations. + +Byte swap instructions +---------------------- + +The byte swap instructions use instruction classes of ``BPF_ALU`` and ``BPF_ALU64`` +and a 4-bit 'code' field of ``BPF_END``. + +The byte swap instructions operate on the destination register +only and do not use a separate source register or immediate value. + +For ``BPF_ALU``, the 1-bit source operand field in the opcode is used to +select what byte order the operation converts from or to. For +``BPF_ALU64``, the 1-bit source operand field in the opcode is reserved +and must be set to 0. + +========= ========= ===== ================================================= +class source value description +========= ========= ===== ================================================= +BPF_ALU BPF_TO_LE 0x00 convert between host byte order and little endian +BPF_ALU BPF_TO_BE 0x08 convert between host byte order and big endian +BPF_ALU64 Reserved 0x00 do byte swap unconditionally +========= ========= ===== ================================================= + +The 'imm' field encodes the width of the swap operations. The following widths +are supported: 16, 32 and 64. + +Examples: + +``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means:: + + dst = htole16(dst) + dst = htole32(dst) + dst = htole64(dst) + +``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 16/32/64 means:: + + dst = htobe16(dst) + dst = htobe32(dst) + dst = htobe64(dst) + +``BPF_ALU64 | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means:: + + dst = bswap16(dst) + dst = bswap32(dst) + dst = bswap64(dst) + +Jump instructions +----------------- + +``BPF_JMP32`` uses 32-bit wide operands while ``BPF_JMP`` uses 64-bit wide operands for +otherwise identical operations. +The 'code' field encodes the operation as below: + +======== ===== === =========================================== ========================================= +code value src description notes +======== ===== === =========================================== ========================================= +BPF_JA 0x0 0x0 PC += offset BPF_JMP class +BPF_JA 0x0 0x0 PC += imm BPF_JMP32 class +BPF_JEQ 0x1 any PC += offset if dst == src +BPF_JGT 0x2 any PC += offset if dst > src unsigned +BPF_JGE 0x3 any PC += offset if dst >= src unsigned +BPF_JSET 0x4 any PC += offset if dst & src +BPF_JNE 0x5 any PC += offset if dst != src +BPF_JSGT 0x6 any PC += offset if dst > src signed +BPF_JSGE 0x7 any PC += offset if dst >= src signed +BPF_CALL 0x8 0x0 call helper function by address see `Helper functions`_ +BPF_CALL 0x8 0x1 call PC += imm see `Program-local functions`_ +BPF_CALL 0x8 0x2 call helper function by BTF ID see `Helper functions`_ +BPF_EXIT 0x9 0x0 return BPF_JMP only +BPF_JLT 0xa any PC += offset if dst < src unsigned +BPF_JLE 0xb any PC += offset if dst <= src unsigned +BPF_JSLT 0xc any PC += offset if dst < src signed +BPF_JSLE 0xd any PC += offset if dst <= src signed +======== ===== === =========================================== ========================================= + +The BPF program needs to store the return value into register R0 before doing a +``BPF_EXIT``. + +Example: + +``BPF_JSGE | BPF_X | BPF_JMP32`` (0x7e) means:: + + if (s32)dst s>= (s32)src goto +offset + +where 's>=' indicates a signed '>=' comparison. + +``BPF_JA | BPF_K | BPF_JMP32`` (0x06) means:: + + gotol +imm + +where 'imm' means the branch offset comes from insn 'imm' field. + +Note that there are two flavors of ``BPF_JA`` instructions. The +``BPF_JMP`` class permits a 16-bit jump offset specified by the 'offset' +field, whereas the ``BPF_JMP32`` class permits a 32-bit jump offset +specified by the 'imm' field. A > 16-bit conditional jump may be +converted to a < 16-bit conditional jump plus a 32-bit unconditional +jump. + +Helper functions +~~~~~~~~~~~~~~~~ + +Helper functions are a concept whereby BPF programs can call into a +set of function calls exposed by the underlying platform. + +Historically, each helper function was identified by an address +encoded in the imm field. The available helper functions may differ +for each program type, but address values are unique across all program types. + +Platforms that support the BPF Type Format (BTF) support identifying +a helper function by a BTF ID encoded in the imm field, where the BTF ID +identifies the helper name and type. + +Program-local functions +~~~~~~~~~~~~~~~~~~~~~~~ +Program-local functions are functions exposed by the same BPF program as the +caller, and are referenced by offset from the call instruction, similar to +``BPF_JA``. The offset is encoded in the imm field of the call instruction. +A ``BPF_EXIT`` within the program-local function will return to the caller. + +Load and store instructions +=========================== + +For load and store instructions (``BPF_LD``, ``BPF_LDX``, ``BPF_ST``, and ``BPF_STX``), the +8-bit 'opcode' field is divided as: + +============ ====== ================= +3 bits (MSB) 2 bits 3 bits (LSB) +============ ====== ================= +mode size instruction class +============ ====== ================= + +The mode modifier is one of: + + ============= ===== ==================================== ============= + mode modifier value description reference + ============= ===== ==================================== ============= + BPF_IMM 0x00 64-bit immediate instructions `64-bit immediate instructions`_ + BPF_ABS 0x20 legacy BPF packet access (absolute) `Legacy BPF Packet access instructions`_ + BPF_IND 0x40 legacy BPF packet access (indirect) `Legacy BPF Packet access instructions`_ + BPF_MEM 0x60 regular load and store operations `Regular load and store operations`_ + BPF_MEMSX 0x80 sign-extension load operations `Sign-extension load operations`_ + BPF_ATOMIC 0xc0 atomic operations `Atomic operations`_ + ============= ===== ==================================== ============= + +The size modifier is one of: + + ============= ===== ===================== + size modifier value description + ============= ===== ===================== + BPF_W 0x00 word (4 bytes) + BPF_H 0x08 half word (2 bytes) + BPF_B 0x10 byte + BPF_DW 0x18 double word (8 bytes) + ============= ===== ===================== + +Regular load and store operations +--------------------------------- + +The ``BPF_MEM`` mode modifier is used to encode regular load and store +instructions that transfer data between a register and memory. + +``BPF_MEM | <size> | BPF_STX`` means:: + + *(size *) (dst + offset) = src + +``BPF_MEM | <size> | BPF_ST`` means:: + + *(size *) (dst + offset) = imm32 + +``BPF_MEM | <size> | BPF_LDX`` means:: + + dst = *(unsigned size *) (src + offset) + +Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW`` and +'unsigned size' is one of u8, u16, u32 or u64. + +Sign-extension load operations +------------------------------ + +The ``BPF_MEMSX`` mode modifier is used to encode :term:`sign-extension<Sign Extend>` load +instructions that transfer data between a register and memory. + +``BPF_MEMSX | <size> | BPF_LDX`` means:: + + dst = *(signed size *) (src + offset) + +Where size is one of: ``BPF_B``, ``BPF_H`` or ``BPF_W``, and +'signed size' is one of s8, s16 or s32. + +Atomic operations +----------------- + +Atomic operations are operations that operate on memory and can not be +interrupted or corrupted by other access to the same memory region +by other BPF programs or means outside of this specification. + +All atomic operations supported by BPF are encoded as store operations +that use the ``BPF_ATOMIC`` mode modifier as follows: + +* ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations +* ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations +* 8-bit and 16-bit wide atomic operations are not supported. + +The 'imm' field is used to encode the actual atomic operation. +Simple atomic operation use a subset of the values defined to encode +arithmetic operations in the 'imm' field to encode the atomic operation: + +======== ===== =========== +imm value description +======== ===== =========== +BPF_ADD 0x00 atomic add +BPF_OR 0x40 atomic or +BPF_AND 0x50 atomic and +BPF_XOR 0xa0 atomic xor +======== ===== =========== + + +``BPF_ATOMIC | BPF_W | BPF_STX`` with 'imm' = BPF_ADD means:: + + *(u32 *)(dst + offset) += src + +``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means:: + + *(u64 *)(dst + offset) += src + +In addition to the simple atomic operations, there also is a modifier and +two complex atomic operations: + +=========== ================ =========================== +imm value description +=========== ================ =========================== +BPF_FETCH 0x01 modifier: return old value +BPF_XCHG 0xe0 | BPF_FETCH atomic exchange +BPF_CMPXCHG 0xf0 | BPF_FETCH atomic compare and exchange +=========== ================ =========================== + +The ``BPF_FETCH`` modifier is optional for simple atomic operations, and +always set for the complex atomic operations. If the ``BPF_FETCH`` flag +is set, then the operation also overwrites ``src`` with the value that +was in memory before it was modified. + +The ``BPF_XCHG`` operation atomically exchanges ``src`` with the value +addressed by ``dst + offset``. + +The ``BPF_CMPXCHG`` operation atomically compares the value addressed by +``dst + offset`` with ``R0``. If they match, the value addressed by +``dst + offset`` is replaced with ``src``. In either case, the +value that was at ``dst + offset`` before the operation is zero-extended +and loaded back to ``R0``. + +64-bit immediate instructions +----------------------------- + +Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction +encoding defined in `Instruction encoding`_, and use the 'src' field of the +basic instruction to hold an opcode subtype. + +The following table defines a set of ``BPF_IMM | BPF_DW | BPF_LD`` instructions +with opcode subtypes in the 'src' field, using new terms such as "map" +defined further below: + +========================= ====== === ========================================= =========== ============== +opcode construction opcode src pseudocode imm type dst type +========================= ====== === ========================================= =========== ============== +BPF_IMM | BPF_DW | BPF_LD 0x18 0x0 dst = imm64 integer integer +BPF_IMM | BPF_DW | BPF_LD 0x18 0x1 dst = map_by_fd(imm) map fd map +BPF_IMM | BPF_DW | BPF_LD 0x18 0x2 dst = map_val(map_by_fd(imm)) + next_imm map fd data pointer +BPF_IMM | BPF_DW | BPF_LD 0x18 0x3 dst = var_addr(imm) variable id data pointer +BPF_IMM | BPF_DW | BPF_LD 0x18 0x4 dst = code_addr(imm) integer code pointer +BPF_IMM | BPF_DW | BPF_LD 0x18 0x5 dst = map_by_idx(imm) map index map +BPF_IMM | BPF_DW | BPF_LD 0x18 0x6 dst = map_val(map_by_idx(imm)) + next_imm map index data pointer +========================= ====== === ========================================= =========== ============== + +where + +* map_by_fd(imm) means to convert a 32-bit file descriptor into an address of a map (see `Maps`_) +* map_by_idx(imm) means to convert a 32-bit index into an address of a map +* map_val(map) gets the address of the first value in a given map +* var_addr(imm) gets the address of a platform variable (see `Platform Variables`_) with a given id +* code_addr(imm) gets the address of the instruction at a specified relative offset in number of (64-bit) instructions +* the 'imm type' can be used by disassemblers for display +* the 'dst type' can be used for verification and JIT compilation purposes + +Maps +~~~~ + +Maps are shared memory regions accessible by BPF programs on some platforms. +A map can have various semantics as defined in a separate document, and may or +may not have a single contiguous memory region, but the 'map_val(map)' is +currently only defined for maps that do have a single contiguous memory region. + +Each map can have a file descriptor (fd) if supported by the platform, where +'map_by_fd(imm)' means to get the map with the specified file descriptor. Each +BPF program can also be defined to use a set of maps associated with the +program at load time, and 'map_by_idx(imm)' means to get the map with the given +index in the set associated with the BPF program containing the instruction. + +Platform Variables +~~~~~~~~~~~~~~~~~~ + +Platform variables are memory regions, identified by integer ids, exposed by +the runtime and accessible by BPF programs on some platforms. The +'var_addr(imm)' operation means to get the address of the memory region +identified by the given id. + +Legacy BPF Packet access instructions +------------------------------------- + +BPF previously introduced special instructions for access to packet data that were +carried over from classic BPF. However, these instructions are +deprecated and should no longer be used. |