diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/kselftest.rst | 415 |
1 files changed, 415 insertions, 0 deletions
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst new file mode 100644 index 0000000000..deede972f2 --- /dev/null +++ b/Documentation/dev-tools/kselftest.rst @@ -0,0 +1,415 @@ +====================== +Linux Kernel Selftests +====================== + +The kernel contains a set of "self tests" under the tools/testing/selftests/ +directory. These are intended to be small tests to exercise individual code +paths in the kernel. Tests are intended to be run after building, installing +and booting a kernel. + +Kselftest from mainline can be run on older stable kernels. Running tests +from mainline offers the best coverage. Several test rings run mainline +kselftest suite on stable releases. The reason is that when a new test +gets added to test existing code to regression test a bug, we should be +able to run that test on an older kernel. Hence, it is important to keep +code that can still test an older kernel and make sure it skips the test +gracefully on newer releases. + +You can find additional information on Kselftest framework, how to +write new tests using the framework on Kselftest wiki: + +https://kselftest.wiki.kernel.org/ + +On some systems, hot-plug tests could hang forever waiting for cpu and +memory to be ready to be offlined. A special hot-plug target is created +to run the full range of hot-plug tests. In default mode, hot-plug tests run +in safe mode with a limited scope. In limited mode, cpu-hotplug test is +run on a single cpu as opposed to all hotplug capable cpus, and memory +hotplug test is run on 2% of hotplug capable memory instead of 10%. + +kselftest runs as a userspace process. Tests that can be written/run in +userspace may wish to use the `Test Harness`_. Tests that need to be +run in kernel space may wish to use a `Test Module`_. + +Running the selftests (hotplug tests are run in limited mode) +============================================================= + +To build the tests:: + + $ make headers + $ make -C tools/testing/selftests + +To run the tests:: + + $ make -C tools/testing/selftests run_tests + +To build and run the tests with a single command, use:: + + $ make kselftest + +Note that some tests will require root privileges. + +Kselftest supports saving output files in a separate directory and then +running tests. To locate output files in a separate directory two syntaxes +are supported. In both cases the working directory must be the root of the +kernel src. This is applicable to "Running a subset of selftests" section +below. + +To build, save output files in a separate directory with O= :: + + $ make O=/tmp/kselftest kselftest + +To build, save output files in a separate directory with KBUILD_OUTPUT :: + + $ export KBUILD_OUTPUT=/tmp/kselftest; make kselftest + +The O= assignment takes precedence over the KBUILD_OUTPUT environment +variable. + +The above commands by default run the tests and print full pass/fail report. +Kselftest supports "summary" option to make it easier to understand the test +results. Please find the detailed individual test results for each test in +/tmp/testname file(s) when summary option is specified. This is applicable +to "Running a subset of selftests" section below. + +To run kselftest with summary option enabled :: + + $ make summary=1 kselftest + +Running a subset of selftests +============================= + +You can use the "TARGETS" variable on the make command line to specify +single test to run, or a list of tests to run. + +To run only tests targeted for a single subsystem:: + + $ make -C tools/testing/selftests TARGETS=ptrace run_tests + +You can specify multiple tests to build and run:: + + $ make TARGETS="size timers" kselftest + +To build, save output files in a separate directory with O= :: + + $ make O=/tmp/kselftest TARGETS="size timers" kselftest + +To build, save output files in a separate directory with KBUILD_OUTPUT :: + + $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest + +Additionally you can use the "SKIP_TARGETS" variable on the make command +line to specify one or more targets to exclude from the TARGETS list. + +To run all tests but a single subsystem:: + + $ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests + +You can specify multiple tests to skip:: + + $ make SKIP_TARGETS="size timers" kselftest + +You can also specify a restricted list of tests to run together with a +dedicated skiplist:: + + $ make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest + +See the top-level tools/testing/selftests/Makefile for the list of all +possible targets. + +Running the full range hotplug selftests +======================================== + +To build the hotplug tests:: + + $ make -C tools/testing/selftests hotplug + +To run the hotplug tests:: + + $ make -C tools/testing/selftests run_hotplug + +Note that some tests will require root privileges. + + +Install selftests +================= + +You can use the "install" target of "make" (which calls the `kselftest_install.sh` +tool) to install selftests in the default location (`tools/testing/selftests/kselftest_install`), +or in a user specified location via the `INSTALL_PATH` "make" variable. + +To install selftests in default location:: + + $ make -C tools/testing/selftests install + +To install selftests in a user specified location:: + + $ make -C tools/testing/selftests install INSTALL_PATH=/some/other/path + +Running installed selftests +=========================== + +Found in the install directory, as well as in the Kselftest tarball, +is a script named `run_kselftest.sh` to run the tests. + +You can simply do the following to run the installed Kselftests. Please +note some tests will require root privileges:: + + $ cd kselftest_install + $ ./run_kselftest.sh + +To see the list of available tests, the `-l` option can be used:: + + $ ./run_kselftest.sh -l + +The `-c` option can be used to run all the tests from a test collection, or +the `-t` option for specific single tests. Either can be used multiple times:: + + $ ./run_kselftest.sh -c bpf -c seccomp -t timers:posix_timers -t timer:nanosleep + +For other features see the script usage output, seen with the `-h` option. + +Timeout for selftests +===================== + +Selftests are designed to be quick and so a default timeout is used of 45 +seconds for each test. Tests can override the default timeout by adding +a settings file in their directory and set a timeout variable there to the +configured a desired upper timeout for the test. Only a few tests override +the timeout with a value higher than 45 seconds, selftests strives to keep +it that way. Timeouts in selftests are not considered fatal because the +system under which a test runs may change and this can also modify the +expected time it takes to run a test. If you have control over the systems +which will run the tests you can configure a test runner on those systems to +use a greater or lower timeout on the command line as with the `-o` or +the `--override-timeout` argument. For example to use 165 seconds instead +one would use: + + $ ./run_kselftest.sh --override-timeout 165 + +You can look at the TAP output to see if you ran into the timeout. Test +runners which know a test must run under a specific time can then optionally +treat these timeouts then as fatal. + +Packaging selftests +=================== + +In some cases packaging is desired, such as when tests need to run on a +different system. To package selftests, run:: + + $ make -C tools/testing/selftests gen_tar + +This generates a tarball in the `INSTALL_PATH/kselftest-packages` directory. By +default, `.gz` format is used. The tar compression format can be overridden by +specifying a `FORMAT` make variable. Any value recognized by `tar's auto-compress`_ +option is supported, such as:: + + $ make -C tools/testing/selftests gen_tar FORMAT=.xz + +`make gen_tar` invokes `make install` so you can use it to package a subset of +tests by using variables specified in `Running a subset of selftests`_ +section:: + + $ make -C tools/testing/selftests gen_tar TARGETS="bpf" FORMAT=.xz + +.. _tar's auto-compress: https://www.gnu.org/software/tar/manual/html_node/gzip.html#auto_002dcompress + +Contributing new tests +====================== + +In general, the rules for selftests are + + * Do as much as you can if you're not root; + + * Don't take too long; + + * Don't break the build on any architecture, and + + * Don't cause the top-level "make run_tests" to fail if your feature is + unconfigured. + +Contributing new tests (details) +================================ + + * In your Makefile, use facilities from lib.mk by including it instead of + reinventing the wheel. Specify flags and binaries generation flags on + need basis before including lib.mk. :: + + CFLAGS = $(KHDR_INCLUDES) + TEST_GEN_PROGS := close_range_test + include ../lib.mk + + * Use TEST_GEN_XXX if such binaries or files are generated during + compiling. + + TEST_PROGS, TEST_GEN_PROGS mean it is the executable tested by + default. + + TEST_CUSTOM_PROGS should be used by tests that require custom build + rules and prevent common build rule use. + + TEST_PROGS are for test shell scripts. Please ensure shell script has + its exec bit set. Otherwise, lib.mk run_tests will generate a warning. + + TEST_CUSTOM_PROGS and TEST_PROGS will be run by common run_tests. + + TEST_PROGS_EXTENDED, TEST_GEN_PROGS_EXTENDED mean it is the + executable which is not tested by default. + TEST_FILES, TEST_GEN_FILES mean it is the file which is used by + test. + + * First use the headers inside the kernel source and/or git repo, and then the + system headers. Headers for the kernel release as opposed to headers + installed by the distro on the system should be the primary focus to be able + to find regressions. Use KHDR_INCLUDES in Makefile to include headers from + the kernel source. + + * If a test needs specific kernel config options enabled, add a config file in + the test directory to enable them. + + e.g: tools/testing/selftests/android/config + + * Create a .gitignore file inside test directory and add all generated objects + in it. + + * Add new test name in TARGETS in selftests/Makefile:: + + TARGETS += android + + * All changes should pass:: + + kselftest-{all,install,clean,gen_tar} + kselftest-{all,install,clean,gen_tar} O=abo_path + kselftest-{all,install,clean,gen_tar} O=rel_path + make -C tools/testing/selftests {all,install,clean,gen_tar} + make -C tools/testing/selftests {all,install,clean,gen_tar} O=abs_path + make -C tools/testing/selftests {all,install,clean,gen_tar} O=rel_path + +Test Module +=========== + +Kselftest tests the kernel from userspace. Sometimes things need +testing from within the kernel, one method of doing this is to create a +test module. We can tie the module into the kselftest framework by +using a shell script test runner. ``kselftest/module.sh`` is designed +to facilitate this process. There is also a header file provided to +assist writing kernel modules that are for use with kselftest: + +- ``tools/testing/selftests/kselftest_module.h`` +- ``tools/testing/selftests/kselftest/module.sh`` + +Note that test modules should taint the kernel with TAINT_TEST. This will +happen automatically for modules which are in the ``tools/testing/`` +directory, or for modules which use the ``kselftest_module.h`` header above. +Otherwise, you'll need to add ``MODULE_INFO(test, "Y")`` to your module +source. selftests which do not load modules typically should not taint the +kernel, but in cases where a non-test module is loaded, TEST_TAINT can be +applied from userspace by writing to ``/proc/sys/kernel/tainted``. + +How to use +---------- + +Here we show the typical steps to create a test module and tie it into +kselftest. We use kselftests for lib/ as an example. + +1. Create the test module + +2. Create the test script that will run (load/unload) the module + e.g. ``tools/testing/selftests/lib/printf.sh`` + +3. Add line to config file e.g. ``tools/testing/selftests/lib/config`` + +4. Add test script to makefile e.g. ``tools/testing/selftests/lib/Makefile`` + +5. Verify it works: + +.. code-block:: sh + + # Assumes you have booted a fresh build of this kernel tree + cd /path/to/linux/tree + make kselftest-merge + make modules + sudo make modules_install + make TARGETS=lib kselftest + +Example Module +-------------- + +A bare bones test module might look like this: + +.. code-block:: c + + // SPDX-License-Identifier: GPL-2.0+ + + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include "../tools/testing/selftests/kselftest_module.h" + + KSTM_MODULE_GLOBALS(); + + /* + * Kernel module for testing the foobinator + */ + + static int __init test_function() + { + ... + } + + static void __init selftest(void) + { + KSTM_CHECK_ZERO(do_test_case("", 0)); + } + + KSTM_MODULE_LOADERS(test_foo); + MODULE_AUTHOR("John Developer <jd@fooman.org>"); + MODULE_LICENSE("GPL"); + MODULE_INFO(test, "Y"); + +Example test script +------------------- + +.. code-block:: sh + + #!/bin/bash + # SPDX-License-Identifier: GPL-2.0+ + $(dirname $0)/../kselftest/module.sh "foo" test_foo + + +Test Harness +============ + +The kselftest_harness.h file contains useful helpers to build tests. The +test harness is for userspace testing, for kernel space testing see `Test +Module`_ above. + +The tests from tools/testing/selftests/seccomp/seccomp_bpf.c can be used as +example. + +Example +------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :doc: example + + +Helpers +------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP + FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT + FIXTURE_VARIANT_ADD + +Operators +--------- + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :doc: operators + +.. kernel-doc:: tools/testing/selftests/kselftest_harness.h + :functions: ASSERT_EQ ASSERT_NE ASSERT_LT ASSERT_LE ASSERT_GT ASSERT_GE + ASSERT_NULL ASSERT_TRUE ASSERT_NULL ASSERT_TRUE ASSERT_FALSE + ASSERT_STREQ ASSERT_STRNE EXPECT_EQ EXPECT_NE EXPECT_LT + EXPECT_LE EXPECT_GT EXPECT_GE EXPECT_NULL EXPECT_TRUE + EXPECT_FALSE EXPECT_STREQ EXPECT_STRNE |