diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/ktap.rst | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst new file mode 100644 index 0000000000..414c105b10 --- /dev/null +++ b/Documentation/dev-tools/ktap.rst @@ -0,0 +1,311 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================================== +The Kernel Test Anything Protocol (KTAP), version 1 +=================================================== + +TAP, or the Test Anything Protocol is a format for specifying test results used +by a number of projects. It's website and specification are found at this `link +<https://testanything.org/>`_. The Linux Kernel largely uses TAP output for test +results. However, Kernel testing frameworks have special needs for test results +which don't align with the original TAP specification. Thus, a "Kernel TAP" +(KTAP) format is specified to extend and alter TAP to support these use-cases. +This specification describes the generally accepted format of KTAP as it is +currently used in the kernel. + +KTAP test results describe a series of tests (which may be nested: i.e., test +can have subtests), each of which can contain both diagnostic data -- e.g., log +lines -- and a final result. The test structure and results are +machine-readable, whereas the diagnostic data is unstructured and is there to +aid human debugging. + +KTAP output is built from four different types of lines: +- Version lines +- Plan lines +- Test case result lines +- Diagnostic lines + +In general, valid KTAP output should also form valid TAP output, but some +information, in particular nested test results, may be lost. Also note that +there is a stagnant draft specification for TAP14, KTAP diverges from this in +a couple of places (notably the "Subtest" header), which are described where +relevant later in this document. + +Version lines +------------- + +All KTAP-formatted results begin with a "version line" which specifies which +version of the (K)TAP standard the result is compliant with. + +For example: +- "KTAP version 1" +- "TAP version 13" +- "TAP version 14" + +Note that, in KTAP, subtests also begin with a version line, which denotes the +start of the nested test results. This differs from TAP14, which uses a +separate "Subtest" line. + +While, going forward, "KTAP version 1" should be used by compliant tests, it +is expected that most parsers and other tooling will accept the other versions +listed here for compatibility with existing tests and frameworks. + +Plan lines +---------- + +A test plan provides the number of tests (or subtests) in the KTAP output. + +Plan lines must follow the format of "1..N" where N is the number of tests or subtests. +Plan lines follow version lines to indicate the number of nested tests. + +While there are cases where the number of tests is not known in advance -- in +which case the test plan may be omitted -- it is strongly recommended one is +present where possible. + +Test case result lines +---------------------- + +Test case result lines indicate the final status of a test. +They are required and must have the format: + +.. code-block:: none + + <result> <number> [<description>][ # [<directive>] [<diagnostic data>]] + +The result can be either "ok", which indicates the test case passed, +or "not ok", which indicates that the test case failed. + +<number> represents the number of the test being performed. The first test must +have the number 1 and the number then must increase by 1 for each additional +subtest within the same test at the same nesting level. + +The description is a description of the test, generally the name of +the test, and can be any string of characters other than # or a +newline. The description is optional, but recommended. + +The directive and any diagnostic data is optional. If either are present, they +must follow a hash sign, "#". + +A directive is a keyword that indicates a different outcome for a test other +than passed and failed. The directive is optional, and consists of a single +keyword preceding the diagnostic data. In the event that a parser encounters +a directive it doesn't support, it should fall back to the "ok" / "not ok" +result. + +Currently accepted directives are: + +- "SKIP", which indicates a test was skipped (note the result of the test case + result line can be either "ok" or "not ok" if the SKIP directive is used) +- "TODO", which indicates that a test is not expected to pass at the moment, + e.g. because the feature it is testing is known to be broken. While this + directive is inherited from TAP, its use in the kernel is discouraged. +- "XFAIL", which indicates that a test is expected to fail. This is similar + to "TODO", above, and is used by some kselftest tests. +- “TIMEOUT”, which indicates a test has timed out (note the result of the test + case result line should be “not ok” if the TIMEOUT directive is used) +- “ERROR”, which indicates that the execution of a test has failed due to a + specific error that is included in the diagnostic data. (note the result of + the test case result line should be “not ok” if the ERROR directive is used) + +The diagnostic data is a plain-text field which contains any additional details +about why this result was produced. This is typically an error message for ERROR +or failed tests, or a description of missing dependencies for a SKIP result. + +The diagnostic data field is optional, and results which have neither a +directive nor any diagnostic data do not need to include the "#" field +separator. + +Example result lines include:: + + ok 1 test_case_name + +The test "test_case_name" passed. + +:: + + not ok 1 test_case_name + +The test "test_case_name" failed. + +:: + + ok 1 test # SKIP necessary dependency unavailable + +The test "test" was SKIPPED with the diagnostic message "necessary dependency +unavailable". + +:: + + not ok 1 test # TIMEOUT 30 seconds + +The test "test" timed out, with diagnostic data "30 seconds". + +:: + + ok 5 check return code # rcode=0 + +The test "check return code" passed, with additional diagnostic data “rcode=0” + + +Diagnostic lines +---------------- + +If tests wish to output any further information, they should do so using +"diagnostic lines". Diagnostic lines are optional, freeform text, and are +often used to describe what is being tested and any intermediate results in +more detail than the final result and diagnostic data line provides. + +Diagnostic lines are formatted as "# <diagnostic_description>", where the +description can be any string. Diagnostic lines can be anywhere in the test +output. As a rule, diagnostic lines regarding a test are directly before the +test result line for that test. + +Note that most tools will treat unknown lines (see below) as diagnostic lines, +even if they do not start with a "#": this is to capture any other useful +kernel output which may help debug the test. It is nevertheless recommended +that tests always prefix any diagnostic output they have with a "#" character. + +Unknown lines +------------- + +There may be lines within KTAP output that do not follow the format of one of +the four formats for lines described above. This is allowed, however, they will +not influence the status of the tests. + +This is an important difference from TAP. Kernel tests may print messages +to the system console or a log file. Both of these destinations may contain +messages either from unrelated kernel or userspace activity, or kernel +messages from non-test code that is invoked by the test. The kernel code +invoked by the test likely is not aware that a test is in progress and +thus can not print the message as a diagnostic message. + +Nested tests +------------ + +In KTAP, tests can be nested. This is done by having a test include within its +output an entire set of KTAP-formatted results. This can be used to categorize +and group related tests, or to split out different results from the same test. + +The "parent" test's result should consist of all of its subtests' results, +starting with another KTAP version line and test plan, and end with the overall +result. If one of the subtests fail, for example, the parent test should also +fail. + +Additionally, all lines in a subtest should be indented. One level of +indentation is two spaces: " ". The indentation should begin at the version +line and should end before the parent test's result line. + +"Unknown lines" are not considered to be lines in a subtest and thus are +allowed to be either indented or not indented. + +An example of a test with two nested subtests: + +:: + + KTAP version 1 + 1..1 + KTAP version 1 + 1..2 + ok 1 test_1 + not ok 2 test_2 + # example failed + not ok 1 example + +An example format with multiple levels of nested testing: + +:: + + KTAP version 1 + 1..2 + KTAP version 1 + 1..2 + KTAP version 1 + 1..2 + not ok 1 test_1 + ok 2 test_2 + not ok 1 test_3 + ok 2 test_4 # SKIP + not ok 1 example_test_1 + ok 2 example_test_2 + + +Major differences between TAP and KTAP +-------------------------------------- + +================================================== ========= =============== +Feature TAP KTAP +================================================== ========= =============== +yaml and json in diagnosic message ok not recommended +TODO directive ok not recognized +allows an arbitrary number of tests to be nested no yes +"Unknown lines" are in category of "Anything else" yes no +"Unknown lines" are incorrect allowed +================================================== ========= =============== + +The TAP14 specification does permit nested tests, but instead of using another +nested version line, uses a line of the form +"Subtest: <name>" where <name> is the name of the parent test. + +Example KTAP output +-------------------- +:: + + KTAP version 1 + 1..1 + KTAP version 1 + 1..3 + KTAP version 1 + 1..1 + # test_1: initializing test_1 + ok 1 test_1 + ok 1 example_test_1 + KTAP version 1 + 1..2 + ok 1 test_1 # SKIP test_1 skipped + ok 2 test_2 + ok 2 example_test_2 + KTAP version 1 + 1..3 + ok 1 test_1 + # test_2: FAIL + not ok 2 test_2 + ok 3 test_3 # SKIP test_3 skipped + not ok 3 example_test_3 + not ok 1 main_test + +This output defines the following hierarchy: + +A single test called "main_test", which fails, and has three subtests: +- "example_test_1", which passes, and has one subtest: + + - "test_1", which passes, and outputs the diagnostic message "test_1: initializing test_1" + +- "example_test_2", which passes, and has two subtests: + + - "test_1", which is skipped, with the explanation "test_1 skipped" + - "test_2", which passes + +- "example_test_3", which fails, and has three subtests + + - "test_1", which passes + - "test_2", which outputs the diagnostic line "test_2: FAIL", and fails. + - "test_3", which is skipped with the explanation "test_3 skipped" + +Note that the individual subtests with the same names do not conflict, as they +are found in different parent tests. This output also exhibits some sensible +rules for "bubbling up" test results: a test fails if any of its subtests fail. +Skipped tests do not affect the result of the parent test (though it often +makes sense for a test to be marked skipped if _all_ of its subtests have been +skipped). + +See also: +--------- + +- The TAP specification: + https://testanything.org/tap-version-13-specification.html +- The (stagnant) TAP version 14 specification: + https://github.com/TestAnything/Specification/blob/tap-14-specification/specification.md +- The kselftest documentation: + Documentation/dev-tools/kselftest.rst +- The KUnit documentation: + Documentation/dev-tools/kunit/index.rst |