diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/kunit/start.rst | 309 |
1 files changed, 309 insertions, 0 deletions
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst new file mode 100644 index 0000000000..a98235326b --- /dev/null +++ b/Documentation/dev-tools/kunit/start.rst @@ -0,0 +1,309 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Getting Started +=============== + +This page contains an overview of the kunit_tool and KUnit framework, +teaching how to run existing tests and then how to write a simple test case, +and covers common problems users face when using KUnit for the first time. + +Installing Dependencies +======================= +KUnit has the same dependencies as the Linux kernel. As long as you can +build the kernel, you can run KUnit. + +Running tests with kunit_tool +============================= +kunit_tool is a Python script, which configures and builds a kernel, runs +tests, and formats the test results. From the kernel repository, you +can run kunit_tool: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run + +.. note :: + You may see the following error: + "The source tree is not clean, please run 'make ARCH=um mrproper'" + + This happens because internally kunit.py specifies ``.kunit`` + (default option) as the build directory in the command ``make O=output/dir`` + through the argument ``--build_dir``. Hence, before starting an + out-of-tree build, the source tree must be clean. + + There is also the same caveat mentioned in the "Build directory for + the kernel" section of the :doc:`admin-guide </admin-guide/README>`, + that is, its use, it must be used for all invocations of ``make``. + The good news is that it can indeed be solved by running + ``make ARCH=um mrproper``, just be aware that this will delete the + current configuration and all generated files. + +If everything worked correctly, you should see the following: + +.. code-block:: + + Configuring KUnit Kernel ... + Building KUnit Kernel ... + Starting KUnit Kernel ... + +The tests will pass or fail. + +.. note :: + Because it is building a lot of sources for the first time, + the ``Building KUnit Kernel`` step may take a while. + +For detailed information on this wrapper, see: +Documentation/dev-tools/kunit/run_wrapper.rst. + +Selecting which tests to run +---------------------------- + +By default, kunit_tool runs all tests reachable with minimal configuration, +that is, using default values for most of the kconfig options. However, +you can select which tests to run by: + +- `Customizing Kconfig`_ used to compile the kernel, or +- `Filtering tests by name`_ to select specifically which compiled tests to run. + +Customizing Kconfig +~~~~~~~~~~~~~~~~~~~ +A good starting point for the ``.kunitconfig`` is the KUnit default config. +If you didn't run ``kunit.py run`` yet, you can generate it by running: + +.. code-block:: bash + + cd $PATH_TO_LINUX_REPO + tools/testing/kunit/kunit.py config + cat .kunit/.kunitconfig + +.. note :: + ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is + ``.kunit`` by default. + +Before running the tests, kunit_tool ensures that all config options +set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn +you if you have not included dependencies for the options used. + +There are many ways to customize the configurations: + +a. Edit ``.kunit/.kunitconfig``. The file should contain the list of kconfig + options required to run the desired tests, including their dependencies. + You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as + it will enable a number of additional tests that you may not want. + If you need to run on an architecture other than UML see :ref:`kunit-on-qemu`. + +b. Enable additional kconfig options on top of ``.kunit/.kunitconfig``. + For example, to include the kernel's linked-list test you can run:: + + ./tools/testing/kunit/kunit.py run \ + --kconfig_add CONFIG_LIST_KUNIT_TEST=y + +c. Provide the path of one or more .kunitconfig files from the tree. + For example, to run only ``FAT_FS`` and ``EXT4`` tests you can run:: + + ./tools/testing/kunit/kunit.py run \ + --kunitconfig ./fs/fat/.kunitconfig \ + --kunitconfig ./fs/ext4/.kunitconfig + +d. If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the + ``.config`` file. But you can edit the ``.config`` file directly or with + tools like ``make menuconfig O=.kunit``. As long as its a superset of + ``.kunitconfig``, kunit.py won't overwrite your changes. + + +.. note :: + + To save a .kunitconfig after finding a satisfactory configuration:: + + make savedefconfig O=.kunit + cp .kunit/defconfig .kunit/.kunitconfig + +Filtering tests by name +~~~~~~~~~~~~~~~~~~~~~~~ +If you want to be more specific than Kconfig can provide, it is also possible +to select which tests to execute at boot-time by passing a glob filter +(read instructions regarding the pattern in the manpage :manpage:`glob(7)`). +If there is a ``"."`` (period) in the filter, it will be interpreted as a +separator between the name of the test suite and the test case, +otherwise, it will be interpreted as the name of the test suite. +For example, let's assume we are using the default config: + +a. inform the name of a test suite, like ``"kunit_executor_test"``, + to run every test case it contains:: + + ./tools/testing/kunit/kunit.py run "kunit_executor_test" + +b. inform the name of a test case prefixed by its test suite, + like ``"example.example_simple_test"``, to run specifically that test case:: + + ./tools/testing/kunit/kunit.py run "example.example_simple_test" + +c. use wildcard characters (``*?[``) to run any test case that matches the pattern, + like ``"*.*64*"`` to run test cases containing ``"64"`` in the name inside + any test suite:: + + ./tools/testing/kunit/kunit.py run "*.*64*" + +Running Tests without the KUnit Wrapper +======================================= +If you do not want to use the KUnit Wrapper (for example: you want code +under test to integrate with other systems, or use a different/ +unsupported architecture or configuration), KUnit can be included in +any kernel, and the results are read out and parsed manually. + +.. note :: + ``CONFIG_KUNIT`` should not be enabled in a production environment. + Enabling KUnit disables Kernel Address-Space Layout Randomization + (KASLR), and tests may affect the state of the kernel in ways not + suitable for production. + +Configuring the Kernel +---------------------- +To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` Kconfig +option (under Kernel Hacking/Kernel Testing and Coverage in +``menuconfig``). From there, you can enable any KUnit tests. They +usually have config options ending in ``_KUNIT_TEST``. + +KUnit and KUnit tests can be compiled as modules. The tests in a module +will run when the module is loaded. + +Running Tests (without KUnit Wrapper) +------------------------------------- +Build and run your kernel. In the kernel log, the test output is printed +out in the TAP format. This will only happen by default if KUnit/tests +are built-in. Otherwise the module will need to be loaded. + +.. note :: + Some lines and/or data may get interspersed in the TAP output. + +Writing Your First Test +======================= +In your kernel repository, let's add some code that we can test. + +1. Create a file ``drivers/misc/example.h``, which includes: + +.. code-block:: c + + int misc_example_add(int left, int right); + +2. Create a file ``drivers/misc/example.c``, which includes: + +.. code-block:: c + + #include <linux/errno.h> + + #include "example.h" + + int misc_example_add(int left, int right) + { + return left + right; + } + +3. Add the following lines to ``drivers/misc/Kconfig``: + +.. code-block:: kconfig + + config MISC_EXAMPLE + bool "My example" + +4. Add the following lines to ``drivers/misc/Makefile``: + +.. code-block:: make + + obj-$(CONFIG_MISC_EXAMPLE) += example.o + +Now we are ready to write the test cases. + +1. Add the below test case in ``drivers/misc/example_test.c``: + +.. code-block:: c + + #include <kunit/test.h> + #include "example.h" + + /* Define the test cases. */ + + static void misc_example_add_test_basic(struct kunit *test) + { + KUNIT_EXPECT_EQ(test, 1, misc_example_add(1, 0)); + KUNIT_EXPECT_EQ(test, 2, misc_example_add(1, 1)); + KUNIT_EXPECT_EQ(test, 0, misc_example_add(-1, 1)); + KUNIT_EXPECT_EQ(test, INT_MAX, misc_example_add(0, INT_MAX)); + KUNIT_EXPECT_EQ(test, -1, misc_example_add(INT_MAX, INT_MIN)); + } + + static void misc_example_test_failure(struct kunit *test) + { + KUNIT_FAIL(test, "This test never passes."); + } + + static struct kunit_case misc_example_test_cases[] = { + KUNIT_CASE(misc_example_add_test_basic), + KUNIT_CASE(misc_example_test_failure), + {} + }; + + static struct kunit_suite misc_example_test_suite = { + .name = "misc-example", + .test_cases = misc_example_test_cases, + }; + kunit_test_suite(misc_example_test_suite); + + MODULE_LICENSE("GPL"); + +2. Add the following lines to ``drivers/misc/Kconfig``: + +.. code-block:: kconfig + + config MISC_EXAMPLE_TEST + tristate "Test for my example" if !KUNIT_ALL_TESTS + depends on MISC_EXAMPLE && KUNIT + default KUNIT_ALL_TESTS + +Note: If your test does not support being built as a loadable module (which is +discouraged), replace tristate by bool, and depend on KUNIT=y instead of KUNIT. + +3. Add the following lines to ``drivers/misc/Makefile``: + +.. code-block:: make + + obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o + +4. Add the following lines to ``.kunit/.kunitconfig``: + +.. code-block:: none + + CONFIG_MISC_EXAMPLE=y + CONFIG_MISC_EXAMPLE_TEST=y + +5. Run the test: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run + +You should see the following failure: + +.. code-block:: none + + ... + [16:08:57] [PASSED] misc-example:misc_example_add_test_basic + [16:08:57] [FAILED] misc-example:misc_example_test_failure + [16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17 + [16:08:57] This test never passes. + ... + +Congrats! You just wrote your first KUnit test. + +Next Steps +========== + +If you're interested in using some of the more advanced features of kunit.py, +take a look at Documentation/dev-tools/kunit/run_wrapper.rst + +If you'd like to run tests without using kunit.py, check out +Documentation/dev-tools/kunit/run_manual.rst + +For more information on writing KUnit tests (including some common techniques +for testing different things), see Documentation/dev-tools/kunit/usage.rst |