diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/cache/l2c2x0.yaml | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml new file mode 100644 index 0000000000..d7840a5c40 --- /dev/null +++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml @@ -0,0 +1,242 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cache/l2c2x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM L2 Cache Controller + +maintainers: + - Rob Herring <robh@kernel.org> + +description: |+ + ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/ + PL220/PL310 and variants) based level 2 cache controller. All these various + implementations of the L2 cache controller have compatible programming + models (Note 1). Some of the properties that are just prefixed "cache-*" are + taken from section 3.7.3 of the Devicetree Specification which can be found + at: + https://www.devicetree.org/specifications/ + + Note 1: The description in this document doesn't apply to integrated L2 + cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These + integrated L2 controllers are assumed to be all preconfigured by + early secure boot code. Thus no need to deal with their configuration + in the kernel at all. + +allOf: + - $ref: /schemas/cache-controller.yaml# + +properties: + compatible: + oneOf: + - enum: + - arm,pl310-cache + - arm,l220-cache + - arm,l210-cache + # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + - bcm,bcm11351-a2-pl310-cache + # For Broadcom bcm11351 chipset where an + # offset needs to be added to the address before passing down to the L2 + # cache controller + - brcm,bcm11351-a2-pl310-cache + # Marvell Controller designed to be + # compatible with the ARM one, with system cache mode (meaning + # maintenance operations on L1 are broadcasted to the L2 and L2 + # performs the same operation). + - marvell,aurora-system-cache + # Marvell Controller designed to be + # compatible with the ARM one with outer cache mode. + - marvell,aurora-outer-cache + - items: + # Marvell Tauros3 cache controller, compatible + # with arm,pl310-cache controller. + - const: marvell,tauros3-cache + - const: arm,pl310-cache + + cache-level: + const: 2 + + cache-unified: true + cache-size: true + cache-sets: true + cache-block-size: true + cache-line-size: true + + reg: + maxItems: 1 + + arm,data-latency: + description: Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,tag-latency: + description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,dirty-latency: + description: Cycles of latency for Dirty RAMs. This is a single cell. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 8 + + arm,filter-ranges: + description: <start length> Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minItems: 2 + maxItems: 2 + + arm,io-coherent: + description: indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. + type: boolean + + interrupts: + # Either a single combined interrupt or up to 9 individual interrupts + minItems: 1 + maxItems: 9 + + cache-id-part: + description: cache id part number to be used if it is not present + on hardware + $ref: /schemas/types.yaml#/definitions/uint32 + + wt-override: + description: If present then L2 is forced to Write through mode + type: boolean + + arm,double-linefill: + description: Override double linefill enable setting. Enable if + non-zero, disable if zero. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,double-linefill-incr: + description: Override double linefill on INCR read. Enable + if non-zero, disable if zero. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,double-linefill-wrap: + description: Override double linefill on WRAP read. Enable + if non-zero, disable if zero. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,prefetch-drop: + description: Override prefetch drop enable setting. Enable if non-zero, + disable if zero. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,prefetch-offset: + description: Override prefetch offset value. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31] + + arm,shared-override: + description: The default behavior of the L220 or PL310 cache + controllers with respect to the shareable attribute is to transform "normal + memory non-cacheable transactions" into "cacheable no allocate" (for reads) + or "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must + be specified to indicate that such transforms are precluded. + type: boolean + + arm,parity-enable: + description: enable parity checking on the L2 cache (L220 or PL310). + type: boolean + + arm,parity-disable: + description: disable parity checking on the L2 cache (L220 or PL310). + type: boolean + + marvell,ecc-enable: + description: enable ECC protection on the L2 cache + type: boolean + + arm,outer-sync-disable: + description: disable the outer sync operation on the L2 cache. + Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that + will randomly hang unless outer sync operations are disabled. + type: boolean + + prefetch-data: + description: | + Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + prefetch-instr: + description: | + Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,dynamic-clock-gating: + description: | + L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,standby-mode: + description: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + arm,early-bresp-disable: + description: Disable the CA9 optimization Early BRESP (PL310) + type: boolean + + arm,full-line-zero-disable: + description: Disable the CA9 optimization Full line of zero + write (PL310) + type: boolean + +required: + - compatible + - cache-unified + - reg + +additionalProperties: false + +examples: + - | + cache-controller@fff12000 { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; + }; + +... |