summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt')
-rw-r--r--Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt60
1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
new file mode 100644
index 000000000..9e0b03a65
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt
@@ -0,0 +1,60 @@
+Broadcom BCM2835 CPRMAN clocks
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CPRMAN clock controller generates clocks in the audio power domain
+of the BCM2835. There is a level of PLLs deriving from an external
+oscillator, a level of PLL dividers that produce channels off of the
+few PLLs, and a level of mostly-generic clock generators sourcing from
+the PLL channels. Most other hardware components source from the
+clock generators, but a few (like the ARM or HDMI) will source from
+the PLL dividers directly.
+
+Required properties:
+- compatible: should be one of the following,
+ "brcm,bcm2711-cprman"
+ "brcm,bcm2835-cprman"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835.h
+- reg: Specifies base physical address and size of the registers
+- clocks: phandles to the parent clocks used as input to the module, in
+ the following order:
+
+ - External oscillator
+ - DSI0 byte clock
+ - DSI0 DDR2 clock
+ - DSI0 DDR clock
+ - DSI1 byte clock
+ - DSI1 DDR2 clock
+ - DSI1 DDR clock
+
+ Only external oscillator is required. The DSI clocks may
+ not be present, in which case their children will be
+ unusable.
+
+Example:
+
+ clk_osc: clock@3 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <19200000>;
+ };
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ i2c0: i2c@7e205000 {
+ compatible = "brcm,bcm2835-i2c";
+ reg = <0x7e205000 0x1000>;
+ interrupts = <2 21>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };