1 files changed, 117 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
new file mode 100644
index 0000000000..b394e05825
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MMIO GPIO
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+description:
+  Some simple GPIO controllers may consist of a single data register or a pair
+  of set/clear-bit registers. Such controllers are common for glue logic in
+  FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
+  NAND-style parallel busses.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-gpio
+      - ni,169445-nand-gpio
+      - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
+
+  big-endian: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  little-endian: true
+
+  reg:
+    minItems: 1
+    description:
+      A list of registers in the controller. The width of each register is
+      determined by its size. All registers must have the same width. The number
+      of GPIOs is set by the width, with bit 0 corresponding to GPIO 0.
+    items:
+      - description:
+          Register to READ the value of the GPIO lines. If GPIO line is high,
+          the bit will be set. If the GPIO line is low, the bit will be cleared.
+          This register may also be used to drive GPIOs if the SET register is
+          omitted.
+      - description:
+          Register to SET the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line high.
+      - description:
+          Register to CLEAR the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line low. If this register is omitted,
+          the SET register will be used to clear the GPIO lines as well, by
+          actively writing the line with 0.
+      - description:
+          Register to set the line as OUTPUT. Setting a bit in this register
+          will turn that line into an output line. Conversely, clearing a bit
+          will turn that line into an input.
+      - description:
+          Register to set this line as INPUT. Setting a bit in this register
+          will turn that line into an input line. Conversely, clearing a bit
+          will turn that line into an output.
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - dat
+        - set
+        - clr
+        - dirout
+        - dirin
+
+  native-endian: true
+
+  no-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If this property is present, the controller cannot drive the GPIO lines.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1f300010 {
+      compatible = "ni,169445-nand-gpio";
+      reg = <0x1f300010 0x4>;
+      reg-names = "dat";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@e0100000 {
+      compatible = "wd,mbl-gpio";
+      reg-names = "dat";
+      reg = <0xe0100000 0x1>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      no-output;
+    };
+
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      native-endian;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };