summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml')
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml99
1 files changed, 99 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
new file mode 100644
index 000000000..d565c4b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC Serial To Parallel (STP) GPIO controller
+
+description: |
+ The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
+ peripheral controller used to drive external shift register cascades. At most
+ 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
+ and Ethernet PHYs to drive some bytes of the cascade automatically.
+
+maintainers:
+ - John Crispin <john@phrozen.org>
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ const: lantiq,gpio-stp-xway
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description:
+ The first cell is the pin number and the second cell is used to specify
+ consumer flags.
+ const: 2
+
+ lantiq,shadow:
+ description:
+ The default value that we shall assume as already set on the
+ shift register cascade.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x000000
+ maximum: 0xffffff
+
+ lantiq,groups:
+ description:
+ Set the 3 bit mask to select which of the 3 groups are enabled
+ in the shift register cascade.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x7
+
+ lantiq,dsl:
+ description:
+ The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
+ property can enable this feature.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x3
+
+ lantiq,rising:
+ description:
+ Use rising instead of falling edge for the shift register.
+ type: boolean
+
+patternProperties:
+ "^lantiq,phy[1-4]$":
+ description:
+ The gphy core can control 3 bits of the gpio cascade. In the xRX200 family
+ phy[1-2] are available, in xRX330 phy[1-3] and in XRX330 phy[1-4].
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0x0
+ maximum: 0x7
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@e100bb0 {
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xE100BB0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-0 = <&stp_pins>;
+ pinctrl-names = "default";
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ lantiq,dsl = <0x3>;
+ lantiq,phy1 = <0x7>;
+ lantiq,phy2 = <0x7>;
+ };
+...