diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio')
3 files changed, 17 insertions, 33 deletions
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml index a1e71c974e..f096f286da 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml @@ -62,6 +62,8 @@ properties: interrupt-controller: true + gpio-ranges: true + wakeup-source: type: boolean description: > @@ -88,6 +90,7 @@ examples: interrupt-parent = <&irq0_intc>; interrupts = <0x6>; brcm,gpio-bank-widths = <32 32 32 24>; + gpio-ranges = <&pinctrl 0 0 120>; }; upg_gio_aon: gpio@f04172c0 { diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml index d481e78958..d61569b3f1 100644 --- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -14,6 +14,7 @@ properties: items: - enum: - microchip,mpfs-gpio + - microchip,coregpio-rtl-v3 reg: maxItems: 1 @@ -43,6 +44,7 @@ properties: default: 32 gpio-controller: true + gpio-line-names: true patternProperties: "^.+-hog(-[0-9]+)?$": @@ -62,12 +64,21 @@ patternProperties: - gpio-hog - gpios +allOf: + - if: + properties: + compatible: + contains: + const: microchip,mpfs-gpio + then: + required: + - interrupts + - "#interrupt-cells" + - interrupt-controller + required: - compatible - reg - - interrupts - - "#interrupt-cells" - - interrupt-controller - "#gpio-cells" - gpio-controller - clocks diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt deleted file mode 100644 index ce97265e23..0000000000 --- a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -Raspberry Pi GPIO expander - -The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The -firmware exposes a mailbox interface that allows the ARM core to control the -GPIO lines on the expander. - -The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi -firmware node. - -Required properties: - -- compatible : Should be "raspberrypi,firmware-gpio" -- gpio-controller : Marks the device node as a gpio controller -- #gpio-cells : Should be two. The first cell is the pin number, and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - -Example: - -firmware: firmware-rpi { - compatible = "raspberrypi,bcm2835-firmware"; - mboxes = <&mailbox>; - - expgpio: gpio { - compatible = "raspberrypi,firmware-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; -}; |