summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/hwmon/ina3221.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/hwmon/ina3221.txt')
-rw-r--r--Documentation/devicetree/bindings/hwmon/ina3221.txt54
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000..fa63b6171
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,54 @@
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+ Required properties:
+ - compatible: Must be "ti,ina3221"
+ - reg: I2C address
+
+ Optional properties:
+ - ti,single-shot: This chip has two power modes: single-shot (chip takes one
+ measurement and then shuts itself down) and continuous (
+ chip takes continuous measurements). The continuous mode is
+ more reliable and suitable for hardware monitor type device,
+ but the single-shot mode is more power-friendly and useful
+ for battery-powered device which cares power consumptions
+ while still needs some measurements occasionally.
+ If this property is present, the single-shot mode will be
+ used, instead of the default continuous one for monitoring.
+
+ = The node contains optional child nodes for three channels =
+ = Each child node describes the information of input source =
+
+ - #address-cells: Required only if a child node is present. Must be 1.
+ - #size-cells: Required only if a child node is present. Must be 0.
+
+2) child nodes
+ Required properties:
+ - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
+
+ Optional properties:
+ - label: Name of the input source
+ - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
+
+Example:
+
+ina3221@40 {
+ compatible = "ti,ina3221";
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ input@0 {
+ reg = <0x0>;
+ status = "disabled";
+ };
+ input@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <5000>;
+ };
+ input@2 {
+ reg = <0x2>;
+ label = "VDD_5V";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+};