diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml new file mode 100644 index 0000000000..890f125d42 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + The ADS131E0x are a family of multichannel, simultaneous sampling, + 24-bit, delta-sigma, analog-to-digital converters (ADCs) with a + built-in programmable gain amplifier (PGA), internal reference + and an onboard oscillator. + The communication with ADC chip is via the SPI bus (mode 1). + + https://www.ti.com/lit/ds/symlink/ads131e08.pdf + +properties: + compatible: + enum: + - ti,ads131e04 + - ti,ads131e06 + - ti,ads131e08 + + reg: + maxItems: 1 + + spi-cpha: true + + clocks: + description: | + Device tree identifier to the clock source (2.048 MHz). + Note: clock source is selected using CLKSEL pin. + maxItems: 1 + + clock-names: + items: + - const: adc-clk + + interrupts: + description: | + IRQ line for the ADC data ready. + maxItems: 1 + + vref-supply: + description: | + Optional external voltage reference. If not supplied, internal voltage + reference is used. + + ti,vref-internal: + description: | + Select the internal voltage reference value. + 0: 2.4V + 1: 4.0V + If this field is left empty, 2.4V is selected. + Note: internal voltage reference is used only if vref-supply is not supplied. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - spi-cpha + - clocks + - clock-names + - interrupts + +patternProperties: + "^channel@([0-7])$": + $ref: adc.yaml + type: object + description: | + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: | + The channel number. + Up to 4 channels, numbered from 0 to 3 for ti,ads131e04. + Up to 6 channels, numbered from 0 to 5 for ti,ads131e06. + Up to 8 channels, numbered from 0 to 7 for ti,ads131e08. + items: + minimum: 0 + maximum: 7 + + ti,gain: + description: | + The PGA gain value for the channel. + If this field is left empty, PGA gain 1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 12] + default: 1 + + ti,mux: + description: | + Channel input selection(muliplexer). + 0: Normal input. + 1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements). + 3: MVDD (for supply measurement) + 4: Temperature sensor + If this field is left empty, normal input is selected. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 3, 4] + default: 0 + + required: + - reg + + additionalProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,ads131e08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + clocks = <&clk2048k>; + clock-names = "adc-clk"; + interrupt-parent = <&gpio5>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&adc_vref>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + ti,gain = <2>; + }; + + channel@3 { + reg = <3>; + }; + + channel@4 { + reg = <4>; + }; + + channel@5 { + reg = <5>; + }; + + channel@6 { + reg = <6>; + }; + + channel@7 { + reg = <7>; + ti,mux = <4>; + }; + }; + }; |