diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/temperature')
9 files changed, 995 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml new file mode 100644 index 0000000000..dbb85135fd --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -0,0 +1,556 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system + +maintainers: + - Nuno Sá <nuno.sa@analog.com> + +description: | + Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital + Temperature Measurement Systems + + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf + +$defs: + sensor-node: + type: object + description: Sensor node common constraints + + properties: + reg: + description: + Channel number. Connects the sensor to the channel with this number + of the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + + +properties: + compatible: + oneOf: + - enum: + - adi,ltc2983 + - adi,ltc2986 + - adi,ltm2985 + - items: + - const: adi,ltc2984 + - const: adi,ltc2983 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + adi,mux-delay-config-us: + description: | + Extra delay prior to each conversion, in addition to the internal 1ms + delay, for the multiplexer to switch input configurations and + excitation values. + + This property is supposed to be in microseconds, but to maintain + compatibility, this value will be multiplied by 100 before usage. + maximum: 255 + default: 0 + + adi,filter-notch-freq: + description: + Notch frequency of the digital filter. + 0 - 50/60Hz rejection + 1 - 60Hz rejection + 2 - 50Hz rejection + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^thermocouple@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Thermocouple sensor. + + properties: + adi,sensor-type: + description: | + 1 - Type J Thermocouple + 2 - Type K Thermocouple + 3 - Type E Thermocouple + 4 - Type N Thermocouple + 5 - Type R Thermocouple + 6 - Type S Thermocouple + 7 - Type T Thermocouple + 8 - Type B Thermocouple + 9 - Custom Thermocouple + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 9 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,sensor-oc-current-microamp: + description: Pulsed current value applied during open-circuit detect. + enum: [10, 100, 500, 1000] + default: 10 + + adi,cold-junction-handle: + description: + Sensor responsible for measuring the thermocouple cold junction + temperature. + $ref: /schemas/types.yaml#/definitions/phandle + + adi,custom-thermocouple: + description: + Used for digitizing custom thermocouples. + See Page 59 of the datasheet. + $ref: /schemas/types.yaml#/definitions/int64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + allOf: + - if: + properties: + adi,sensor-type: + const: 9 + then: + required: + - adi,custom-thermocouple + + "^diode@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Diode sensor. + + properties: + adi,sensor-type: + description: Sensor type for diodes. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 28 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,three-conversion-cycles: + description: + Whether to use three conversion cycles to remove parasitic + resistance between the device and the diode. + type: boolean + + adi,average-on: + description: + Whether to use a running average of the diode temperature + reading to reduce the noise when the diode is used as a cold + junction temperature element on an isothermal block where + temperatures change slowly. + type: boolean + + adi,excitation-current-microamp: + description: + Magnitude of the 1l excitation current applied to the diode. + 4l excitation current will be 4 times this value, and 8l + excitation current will be 8 times value. + enum: [10, 20, 40, 80] + default: 10 + + adi,ideal-factor-value: + description: + Diode ideality factor. + Set this property to 1000000 times the real value. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + "^rtd@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: RTD sensor. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: | + 10 - RTD PT-10 + 11 - RTD PT-50 + 12 - RTD PT-100 + 13 - RTD PT-200 + 14 - RTD PT-500 + 15 - RTD PT-1000 + 16 - RTD PT-1000 (0.00375) + 17 - RTD NI-120 + 18 - RTD Custom + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 10 + maximum: 18 + + adi,rsense-handle: + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle + + adi,number-of-wires: + description: + Number of wires used by the RTD. + 5 means 4 wires with Kelvin sense resistor. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] + default: 2 + + adi,rsense-share: + description: + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. + type: boolean + + adi,excitation-current-microamp: + description: Excitation current applied to the RTD. + enum: [5, 10, 25, 50, 100, 250, 500, 1000] + default: 5 + + adi,rtd-curve: + description: | + RTD curve and the corresponding Callendar-VanDusen constants. + 0 - European + 1 - American + 2 - Japanese + 3 - ITS-90 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + adi,custom-rtd: + description: + Used for digitizing custom RTDs. + See Page 62 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Resistance point in uOhms. + - description: Temperature point in uK. + + required: + - adi,rsense-handle + + allOf: + - if: + properties: + adi,number-of-wires: + const: 4 + then: + properties: + adi,current-rotate: + description: + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. + type: boolean + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + - if: + properties: + adi,sensor-type: + const: 18 + then: + required: + - adi,custom-rtd + + "^thermistor@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Thermistor sensor. + + properties: + adi,sensor-type: + description: + 19 - Thermistor 44004/44033 2.252kohm at 25°C + 20 - Thermistor 44005/44030 3kohm at 25°C + 21 - Thermistor 44007/44034 5kohm at 25°C + 22 - Thermistor 44006/44031 10kohm at 25°C + 23 - Thermistor 44008/44032 30kohm at 25°C + 24 - Thermistor YSI 400 2.252kohm at 25°C + 25 - Thermistor Spectrum 1003k 1kohm + 26 - Thermistor Custom Steinhart-Hart + 27 - Custom Thermistor + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 19 + maximum: 27 + + adi,rsense-handle: + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,rsense-share: + description: + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. + type: boolean + + adi,current-rotate: + description: + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. + type: boolean + + adi,excitation-current-nanoamp: + description: + Excitation current applied to the thermistor. + 0 sets the sensor in auto-range mode. + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] + default: 0 + + adi,custom-thermistor: + description: + Used for digitizing custom thermistors. + See Page 65 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Resistance point in uOhms. + - description: Temperature point in uK. + + adi,custom-steinhart: + description: + Steinhart-Hart coefficients in raw format, used for digitizing + custom thermistors. + See Page 68 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 + + required: + - adi,rsense-handle + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + allOf: + - if: + properties: + adi,sensor-type: + const: 26 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-steinhart + - if: + properties: + adi,sensor-type: + const: 27 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-thermistor + + "^adc@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Direct ADC sensor. + + properties: + adi,sensor-type: + description: Sensor type for direct ADC sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 30 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + "^temp@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Active analog temperature sensor. + + properties: + adi,sensor-type: + description: Sensor type for active analog temperature sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 31 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,custom-temp: + description: + Used for digitizing active analog temperature sensors. + See Page 67 of the LTM2985 datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + required: + - adi,custom-temp + + "^rsense@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Sense resistor sensor. + + properties: + reg: + minimum: 2 + maximum: 20 + + adi,sensor-type: + description: Sensor type sense resistor sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 29 + + adi,rsense-val-milli-ohms: + description: Value of the sense resistor. + + required: + - adi,rsense-val-milli-ohms + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ltc2983 + - adi,ltc2984 + then: + patternProperties: + "^temp@": false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00f371ec 0x12345678 + 0x2c0f8733 0x10018c66 0xa0feaccd + 0x90021d99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = + /bits/ 64 <(-50220000) 0>, + /bits/ 64 <(-30200000) 99100000>, + /bits/ 64 <(-5300000) 135400000>, + /bits/ 64 <0 273150000>, + /bits/ 64 <40200000 361200000>, + /bits/ 64 <55300000 522100000>, + /bits/ 64 <88300000 720300000>, + /bits/ 64 <132200000 811200000>, + /bits/ 64 <188700000 922500000>, + /bits/ 64 <460400000 1000000000>; //10 pairs + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml new file mode 100644 index 0000000000..0805ed7e21 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX31855 and similar thermocouples + +maintainers: + - Matt Ranostay <matt.ranostay@konsulko.com> + +description: | + https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf + https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf + +properties: + compatible: + description: + The generic maxim,max31855 compatible is deprecated in favour of + the thermocouple type specific variants. + enum: + - maxim,max6675 + - maxim,max31855 + - maxim,max31855k + - maxim,max31855j + - maxim,max31855n + - maxim,max31855s + - maxim,max31855t + - maxim,max31855e + - maxim,max31855r + + reg: + maxItems: 1 + + spi-cpha: true + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - maxim,max6675 + then: + required: + - spi-cpha + else: + properties: + spi-cpha: false + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@0 { + compatible = "maxim,max31855k"; + reg = <0>; + spi-max-frequency = <4300000>; + }; + temp-sensor@1 { + compatible = "maxim,max6675"; + reg = <1>; + spi-max-frequency = <4300000>; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml new file mode 100644 index 0000000000..228a941654 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/maxim,max31856.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX31856 thermocouple support + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf + +properties: + compatible: + const: maxim,max31856 + + reg: + maxItems: 1 + + spi-cpha: true + + thermocouple-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted). + Use defines in dt-bindings/iio/temperature/thermocouple.h. + Supported types are B, E, J, K, N, R, S, T. + +required: + - compatible + - reg + - spi-cpha + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/iio/temperature/thermocouple.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@0 { + compatible = "maxim,max31856"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + thermocouple-type = <THERMOCOUPLE_TYPE_K>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml new file mode 100644 index 0000000000..7cc365e0eb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/maxim,max31865.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX31865 Resistance Temperature Detector. + +maintainers: + - Navin Sankar Velliangiri <navin@linumiz.com> + +description: | + https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf + +properties: + compatible: + const: maxim,max31865 + + reg: + maxItems: 1 + + maxim,3-wire: + description: + Identifies the number of wires used by the RTD. Setting this property + enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. + type: boolean + + spi-cpha: true + +required: + - compatible + - reg + - spi-cpha + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@0 { + compatible = "maxim,max31865"; + reg = <0>; + spi-max-frequency = <400000>; + spi-cpha; + maxim,3-wire; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml new file mode 100644 index 0000000000..654d31f65d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Melexis MLX90614/MLX90615 contactless IR temperature sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + - Crt Mori <cmo@melexis.com> + +description: | + http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx + +properties: + compatible: + enum: + - melexis,mlx90614 + - melexis,mlx90615 + + reg: + maxItems: 1 + + wakeup-gpios: + description: + GPIO connected to the SDA line to hold low in order to wake up the + device. In normal operation, the GPIO is set as input and will + not interfere in I2C communication. There is no need for a GPIO + driving the SCL line. If no GPIO is given, power management is disabled. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@5a { + compatible = "melexis,mlx90614"; + reg = <0x5a>; + wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml new file mode 100644 index 0000000000..4a55e7f25a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Melexis MLX90632 contactless Infra Red temperature sensor + +maintainers: + - Crt Mori <cmo@melexis.com> + +description: | + https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 + + There are various applications for the Infra Red contactless temperature + sensor and MLX90632 is most suitable for consumer applications where + measured object temperature is in range between -20 to 200 degrees + Celsius with relative error of measurement below 1 degree Celsius in + object temperature range for industrial applications. Since it can + operate and measure ambient temperature in range of -20 to 85 degrees + Celsius it is suitable also for outdoor use. + + Be aware that electronics surrounding the sensor can increase ambient + temperature. MLX90632 can be calibrated to reduce the housing effect via + already existing EEPROM parameters. + + Since measured object emissivity effects Infra Red energy emitted, + emissivity should be set before requesting the object temperature. + +properties: + compatible: + const: melexis,mlx90632 + + reg: + maxItems: 1 + description: Default is 0x3a, but can be reprogrammed. + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@3a { + compatible = "melexis,mlx90632"; + reg = <0x3a>; + vdd-supply = <&ldo4_reg>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml new file mode 100644 index 0000000000..d43002b9bf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMP006 IR thermopile sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package. + https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf + +properties: + compatible: + const: ti,tmp006 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + temperature-sensor@40 { + compatible = "ti,tmp006"; + reg = <0x40>; + vdd-supply = <&ldo4_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml new file mode 100644 index 0000000000..3c2b7189fa --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp007.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp007.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IR thermopile sensor with integrated math engine + +maintainers: + - Manivannan Sadhasivam <manivannanece23@gmail.com> + +description: | + http://www.ti.com/lit/ds/symlink/tmp007.pdf + +properties: + compatible: + const: ti,tmp007 + + reg: + description: | + The I2C address of the sensor (changeable via ADR pins) + ------------------------------ + |ADR1 | ADR0 | Device Address| + ------------------------------ + 0 0 0x40 + 0 1 0x41 + 0 SDA 0x42 + 0 SCL 0x43 + 1 0 0x44 + 1 1 0x45 + 1 SDA 0x46 + 1 SCL 0x47 + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@40 { + compatible = "ti,tmp007"; + reg = <0x40>; + interrupt-parent = <&gpio0>; + interrupts = <5 0x08>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml new file mode 100644 index 0000000000..8c6d7735e8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMP117 - Digital temperature sensor with integrated NV memory + +description: | + TI TMP116/117 - Digital temperature sensor with integrated NV memory that + supports I2C interface. + https://www.ti.com/lit/gpn/tmp116 + https://www.ti.com/lit/gpn/tmp117 + +maintainers: + - Puranjay Mohan <puranjay12@gmail.com> + +properties: + compatible: + enum: + - ti,tmp116 + - ti,tmp117 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tmp117@48 { + compatible = "ti,tmp117"; + reg = <0x48>; + }; + }; |