summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/input/touchscreen
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/input/touchscreen')
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml97
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml95
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/goodix.yaml5
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml21
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt38
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml6
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml2
7 files changed, 219 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
new file mode 100644
index 0000000000..678756ad0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6UL Touch Controller
+
+maintainers:
+ - Haibo Chen <haibo.chen@nxp.com>
+ - Shawn Guo <shawnguo@kernel.org>
+ - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+ compatible:
+ const: fsl,imx6ul-tsc
+
+ reg:
+ items:
+ - description: touch controller address
+ - description: ADC2 address
+
+ interrupts:
+ items:
+ - description: touch controller address
+ - description: ADC2 address
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: tsc
+ - const: adc
+
+ xnur-gpios:
+ maxItems: 1
+ description:
+ The X- gpio this controller connect to. This xnur-gpio returns to
+ low once the finger leave the touch screen (The last touch event
+ the touch controller capture).
+
+ measure-delay-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The value of measure delay time. Before X-axis or Y-axis measurement,
+ the screen need some time before even potential distribution ready.
+ default: 0xffff
+ minimum: 0
+ maximum: 0xffffff
+
+ pre-charge-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The touch screen need some time to precharge.
+ default: 0xfff
+ minimum: 0
+ maximum: 0xffffffff
+
+ touchscreen-average-samples:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of data samples which are averaged for each read.
+ enum: [ 1, 4, 8, 16, 32 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - xnur-gpios
+
+allOf:
+ - $ref: touchscreen.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx6ul-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ touchscreen@2040000 {
+ compatible = "fsl,imx6ul-tsc";
+ reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_IPG>,
+ <&clks IMX6UL_CLK_ADC2>;
+ clock-names = "tsc", "adc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ measure-delay-time = <0xfff>;
+ pre-charge-time = <0xffff>;
+ touchscreen-average-samples = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 0000000000..d90f045ac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+ be connected to either I2C or SPI buses.
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - goodix,gt9916
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply regulator on AVDD pin
+
+ vddio-supply:
+ description: power supply regulator on VDDIO pin
+
+ spi-max-frequency: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - avdd-supply
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@5d {
+ compatible = "goodix,gt9916";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&ts_avdd>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <768>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ touchscreen@0 {
+ compatible = "goodix,gt9916";
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&ts_avdd>;
+ spi-max-frequency = <1000000>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <768>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index 3d016b87c8..2a2d86cfd1 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -37,8 +37,9 @@ properties:
maxItems: 1
irq-gpios:
- description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
- as output to reset the device.
+ description: GPIO pin used for IRQ input. Additionally, this line is
+ sampled by the device on reset deassertion to select the I2C client
+ address, thus it can be driven by the host during the reset sequence.
maxItems: 1
reset-gpios:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
index 0d6b033fd5..77ba280b3b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller
maintainers:
- Markuss Broks <markuss.broks@gmail.com>
-allOf:
- - $ref: touchscreen.yaml#
-
properties:
$nodename:
pattern: "^touchscreen@[0-9a-f]+$"
compatible:
enum:
+ - imagis,ist3032c
+ - imagis,ist3038b
- imagis,ist3038c
reg:
@@ -32,6 +31,10 @@ properties:
vddio-supply:
description: Power supply regulator for the I2C bus
+ linux,keycodes:
+ description: Keycodes for the touch keys
+ maxItems: 5
+
touchscreen-size-x: true
touchscreen-size-y: true
touchscreen-fuzz-x: true
@@ -42,6 +45,18 @@ properties:
additionalProperties: false
+allOf:
+ - $ref: touchscreen.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: imagis,ist3032c
+ then:
+ properties:
+ linux,keycodes: false
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
deleted file mode 100644
index 1649150044..0000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale i.MX6UL Touch Controller
-
-Required properties:
-- compatible: must be "fsl,imx6ul-tsc".
-- reg: this touch controller address and the ADC2 address.
-- interrupts: the interrupt of this touch controller and ADC2.
-- clocks: the root clock of touch controller and ADC2.
-- clock-names; must be "tsc" and "adc".
-- xnur-gpio: the X- gpio this controller connect to.
- This xnur-gpio returns to low once the finger leave the touch screen (The
- last touch event the touch controller capture).
-
-Optional properties:
-- measure-delay-time: the value of measure delay time.
- Before X-axis or Y-axis measurement, the screen need some time before
- even potential distribution ready.
- This value depends on the touch screen.
-- pre-charge-time: the touch screen need some time to precharge.
- This value depends on the touch screen.
-- touchscreen-average-samples: Number of data samples which are averaged for
- each read. Valid values are 1, 4, 8, 16 and 32.
-
-Example:
- tsc: tsc@2040000 {
- compatible = "fsl,imx6ul-tsc";
- reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6UL_CLK_IPG>,
- <&clks IMX6UL_CLK_ADC2>;
- clock-names = "tsc", "adc";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
- measure-delay-time = <0xfff>;
- pre-charge-time = <0xffff>;
- touchscreen-average-samples = <32>;
- };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
index 07f9dd6b1c..90ebd4f835 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -17,13 +17,17 @@ properties:
pattern: "^touchscreen(@.*)?$"
compatible:
- items:
+ oneOf:
- enum:
- melfas,mms114
- melfas,mms134s
- melfas,mms136
- melfas,mms152
- melfas,mms345l
+ - items:
+ - enum:
+ - melfas,mms252
+ - const: melfas,mms114
reg:
description: I2C address
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
index 95b554be25..5381a96f49 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -31,7 +31,7 @@ properties:
maxItems: 1
firmware-name:
- $ref: /schemas/types.yaml#/definitions/string
+ maxItems: 1
description: >
File basename for board specific firmware