summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml')
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml91
1 files changed, 91 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000..5ecb6faa7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+ This block is a first level interrupt controller that is typically connected
+ directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip
+ since BCM7038 has contained this hardware.
+
+ Key elements of the hardware design include:
+
+ - 64, 96, 128, or 160 incoming level IRQ lines
+
+ - Most onchip peripherals are wired directly to an L1 input
+
+ - A separate instance of the register set for each CPU, allowing individual
+ peripheral IRQs to be routed to any CPU
+
+ - Atomic mask/unmask operations
+
+ - No polarity/level/edge settings
+
+ - No FIFO or priority encoder logic; software is expected to read all
+ 2-5 status words to determine which IRQs are pending
+
+ If multiple reg ranges and interrupt-parent entries are present on an SMP
+ system, the driver will allow IRQ SMP affinity to be set up through the
+ /proc/irq/ interface. In the simplest possible configuration, only one
+ reg range and one interrupt-parent is needed.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm7038-l1-intc
+
+ reg:
+ description: >
+ Specifies the base physical address and size of the registers
+ the number of supported IRQs is inferred from the size argument
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ description: >
+ Specifies the interrupt line(s) in the interrupt-parent controller node;
+ valid values depend on the type of parent interrupt controller
+
+ brcm,irq-can-wake:
+ type: boolean
+ description: >
+ If present, this means the L1 controller can be used as a
+ wakeup source for system suspend/resume.
+
+ brcm,int-fwd-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ If present, a bit mask to indicate which interrupts have already been
+ configured by the firmware and should be left unmanaged. This should
+ have one 32-bit word per status/set/clear/mask group.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ periph_intc: interrupt-controller@1041a400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };