diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
9 files changed, 277 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml index 3b60afbab..e0983e449 100644 --- a/Documentation/devicetree/bindings/leds/backlight/common.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml @@ -33,4 +33,21 @@ properties: due to restrictions in a specific system, such as mounting conditions. $ref: /schemas/types.yaml#/definitions/uint32 + brightness-levels: + description: + Array of distinct brightness levels. The levels must be in the range + accepted by the underlying LED device. Typically these are in the range + from 0 to 255, but any range starting at 0 will do, as long as they are + accepted by the LED. + The 0 value means a 0% of brightness (darkest/off), while the last value + in the array represents a full 100% brightness (brightest). + If this array is not provided, the driver default mapping is used. + $ref: /schemas/types.yaml#/definitions/uint32-array + + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml index d7b78198a..f5554da6b 100644 --- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml @@ -16,6 +16,9 @@ description: can also be used to describe a backlight device controlled by the output of a LED driver. +allOf: + - $ref: common.yaml# + properties: compatible: const: led-backlight @@ -26,25 +29,11 @@ properties: items: maxItems: 1 - brightness-levels: - description: - Array of distinct brightness levels. The levels must be in the range - accepted by the underlying LED devices. This is used to translate a - backlight brightness level into a LED brightness level. If it is not - provided, the identity mapping is used. - $ref: /schemas/types.yaml#/definitions/uint32-array - - default-brightness-level: - description: - The default brightness level (index into the array defined by the - "brightness-levels" property). - $ref: /schemas/types.yaml#/definitions/uint32 - required: - compatible - leds -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt deleted file mode 100644 index b4cffdaa4..000000000 --- a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt +++ /dev/null @@ -1,10 +0,0 @@ -88pm860x-backlight bindings - -Optional properties: - - maxim,max8925-dual-string: whether support dual string - -Example: - - backlights { - maxim,max8925-dual-string = <0>; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml new file mode 100644 index 000000000..4191e3362 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MPS MP3309C backlight + +maintainers: + - Flavio Suligoi <f.suligoi@asem.it> + +description: | + The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a + programmable switching frequency to optimize efficiency. + It supports two different dimming modes: + + - analog mode, via I2C commands (default) + - PWM controlled mode. + + The datasheet is available at: + https://www.monolithicpower.com/en/mp3309c.html + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: mps,mp3309c + + reg: + maxItems: 1 + + pwms: + description: if present, the backlight is controlled in PWM mode. + maxItems: 1 + + enable-gpios: + description: GPIO used to enable the backlight in "analog-i2c" dimming mode. + maxItems: 1 + + mps,overvoltage-protection-microvolt: + description: Overvoltage protection (13.5V, 24V or 35.5V). + enum: [ 13500000, 24000000, 35500000 ] + default: 35500000 + + mps,no-sync-mode: + description: disable synchronous rectification mode + type: boolean + +required: + - compatible + - reg + - max-brightness + - default-brightness + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Backlight with PWM control */ + backlight_pwm: backlight@17 { + compatible = "mps,mp3309c"; + reg = <0x17>; + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */ + max-brightness = <100>; + default-brightness = <80>; + mps,overvoltage-protection-microvolt = <24000000>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml index 535690288..b71f6454a 100644 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml @@ -11,6 +11,9 @@ maintainers: - Daniel Thompson <daniel.thompson@linaro.org> - Jingoo Han <jingoohan1@gmail.com> +allOf: + - $ref: common.yaml# + properties: compatible: const: pwm-backlight @@ -39,21 +42,6 @@ properties: Delay in ms between disabling the backlight using GPIO and setting PWM value to 0. - brightness-levels: - description: - Array of distinct brightness levels. Typically these are in the range - from 0 to 255, but any range starting at 0 will do. The actual brightness - level (PWM duty cycle) will be interpolated from these values. 0 means a - 0% duty cycle (darkest/off), while the last value in the array represents - a 100% duty cycle (brightest). - $ref: /schemas/types.yaml#/definitions/uint32-array - - default-brightness-level: - description: - The default brightness level (index into the array defined by the - "brightness-levels" property). - $ref: /schemas/types.yaml#/definitions/uint32 - num-interpolated-steps: description: Number of interpolated steps between each value of brightness-levels @@ -69,7 +57,7 @@ required: - compatible - pwms -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 5fb7007f3..c8d0ba5f2 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -43,7 +43,7 @@ properties: LED_COLOR_ID available, add a new one. $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 9 + maximum: 14 function-enumerator: description: @@ -191,6 +191,8 @@ properties: each of them having its own LED assigned (assuming they are not hardwired). In such cases this property should contain phandle(s) of related source device(s). + Another example is a GPIO line that will be monitored and mirror the + state of the line (with or without inversion flags) to the LED. In many cases LED can be related to more than one device (e.g. one USB LED vs. multiple USB ports). Each source should be represented by a node in the device tree and be referenced by a phandle and a set of phandle diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml index f2a6fa140..7526e3149 100644 --- a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml @@ -15,7 +15,10 @@ description: properties: compatible: - const: pwm-ir-tx + oneOf: + - const: pwm-ir-tx + - const: nokia,n900-ir + deprecated: true pwms: maxItems: 1 diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml new file mode 100644 index 000000000..832c030a5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/kinetic,ktd202x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Kinetic KTD2026/7 RGB/White LED Driver + +maintainers: + - André Apitzsch <git@apitzsch.eu> + +description: | + The KTD2026/7 is a RGB/White LED driver with I2C interface. + + The data sheet can be found at: + https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf + +properties: + compatible: + enum: + - kinetic,ktd2026 + - kinetic,ktd2027 + + reg: + maxItems: 1 + + vin-supply: + description: Regulator providing power to the "VIN" pin. + + vio-supply: + description: Regulator providing power for pull-up of the I/O lines. + Note that this regulator does not directly connect to KTD2026, but is + needed for the correct operation of the status ("ST") and I2C lines. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + multi-led: + type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-3]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: Index of the LED. + minimum: 0 + maximum: 3 + + required: + - reg + - color + + required: + - "#address-cells" + - "#size-cells" + +patternProperties: + "^led@[0-3]$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: Index of the LED. + minimum: 0 + maximum: 3 + + required: + - reg + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml index ed26ec19e..20930d327 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.yaml +++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml @@ -60,7 +60,7 @@ examples: - | syscon@10000000 { - compatible = "arm,realview-pb1176-syscon", "syscon"; + compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; #address-cells = <1>; #size-cells = <1>; |