diff options
Diffstat (limited to 'Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml new file mode 100644 index 0000000000..6829a4aadd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2022 Amarulasolutions +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV5693/OV5695 CMOS Sensors + +maintainers: + - Tommaso Merciai <tommaso.merciai@amarulasolutions.com> + +description: | + The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS + image sensors that deliver 2592x1944 at 30fps. It provides full-frame, + sub-sampled, and windowed 10-bit MIPI images in various formats via the + Serial Camera Control Bus (SCCB) interface. + + OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus + (SCCB). The sensor output is available via CSI-2 serial data output (up to + 2-lane). + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + - if: + properties: + compatible: + contains: + const: ovti,ov5693 + then: + properties: + port: + properties: + endpoint: + required: + - link-frequencies + +properties: + compatible: + enum: + - ovti,ov5693 + - ovti,ov5695 + + reg: + maxItems: 1 + + clocks: + description: + System input clock (aka XVCLK). From 6 to 27 MHz. + maxItems: 1 + + clock-names: + const: xvclk + + dovdd-supply: + description: + Digital I/O voltage supply, 1.8V. + + avdd-supply: + description: + Analog voltage supply, 2.8V. + + dvdd-supply: + description: + Digital core voltage supply, 1.2V. + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDN which is physically + active low. + maxItems: 1 + + port: + description: MIPI CSI-2 transmitter port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + link-frequencies: true + + data-lanes: + minItems: 1 + maxItems: 2 + + required: + - data-lanes + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/pinctrl/rockchip.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov5693: camera@36 { + compatible = "ovti,ov5693"; + reg = <0x36>; + + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + + clocks = <&cru SCLK_CIF_OUT>; + assigned-clocks = <&cru SCLK_CIF_OUT>; + assigned-clock-rates = <19200000>; + + avdd-supply = <&vcc_1v8>; + dvdd-supply = <&vcc_1v2>; + dovdd-supply = <&vcc_2v8>; + + rotation = <90>; + orientation = <0>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <450000000>; + }; + }; + }; + }; + +... |