diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/dlg,da9063.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/dlg,da9063.yaml | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml new file mode 100644 index 0000000000..c5a7e10d7d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) + +maintainers: + - Steve Twiss <stwiss.opensource@diasemi.com> + +description: | + For device-tree bindings of other sub-modules refer to the binding documents + under the respective sub-system directories. + Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special + handling: First, when GP_FB2 is used, it must be ensured that there is no + moment where all voltage monitors are disabled. Next, as da9063 only supports + UV *and* OV monitoring, both must be set to the same severity and value + (0: disable, 1: enable). + +properties: + compatible: + enum: + - dlg,da9063 + - dlg,da9063l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + dlg,use-sw-pm: + type: boolean + description: + Disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). + + watchdog: + type: object + $ref: /schemas/watchdog/watchdog.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-watchdog + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-rtc + + onkey: + type: object + $ref: /schemas/input/input.yaml# + unevaluatedProperties: false + properties: + compatible: + const: dlg,da9063-onkey + + dlg,disable-key-power: + type: boolean + description: | + Disable power-down using a long key-press. + If this entry does not exist then by default the key-press triggered + power down is enabled and the OnKey will support both KEY_POWER and + KEY_SLEEP. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + #interrupt-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + watchdog { + compatible = "dlg,da9063-watchdog"; + }; + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + regulators { + bcore1 { + regulator-name = "BCORE1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + ldo6 { + /* UNUSED */ + regulator-name = "LDO_6"; + regulator-uv-protection-microvolt = <0>; + regulator-ov-protection-microvolt = <0>; + }; + ldo11 { + regulator-name = "LDO_11"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-uv-protection-microvolt = <1>; + regulator-ov-protection-microvolt = <1>; + regulator-always-on; + }; + }; + }; + }; +... |