diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml new file mode 100644 index 0000000000..aea0b7d57d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -0,0 +1,296 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S5M8767 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for S2M and S5M family of Power + Management IC (PMIC). + + The Samsung S5M8767 is a Power Management IC which includes voltage + and current regulators, RTC, clock outputs and other sub-blocks. + +properties: + compatible: + const: samsung,s5m8767-pmic + + clocks: + $ref: ../clock/samsung,s2mps11.yaml + description: + Child node describing clock provider. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: ../regulator/samsung,s5m8767.yaml + description: + List of child nodes that specify the regulators. + + s5m8767,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck2 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck3-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck3 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck4-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 8 + maxItems: 8 + description: | + A set of 8 voltage values in micro-volt (uV) units for buck4 when + changing voltage using gpio dvs. + + s5m8767,pmic-buck-ds-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for selecting GPIO DVS lines. + It is one-to-one mapped to dvs gpio lines. + + s5m8767,pmic-buck2-uses-gpio-dvs: + type: boolean + description: buck2 can be controlled by gpio dvs. + + s5m8767,pmic-buck3-uses-gpio-dvs: + type: boolean + description: buck3 can be controlled by gpio dvs. + + s5m8767,pmic-buck4-uses-gpio-dvs: + type: boolean + description: buck4 can be controlled by gpio dvs. + + s5m8767,pmic-buck-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32-array + minimum: 0 + maximum: 7 + default: 0 + description: | + Default voltage setting selected from the possible 8 options selectable + by the dvs gpios. The value of this property should be between 0 and 7. + If not specified or if out of range, the default value of this property + is set to 0. + + s5m8767,pmic-buck-dvs-gpios: + minItems: 3 + maxItems: 3 + description: | + GPIO specifiers for three host gpio's used for dvs. + + vinb1-supply: + description: Power supply for buck1 + vinb2-supply: + description: Power supply for buck2 + vinb3-supply: + description: Power supply for buck3 + vinb4-supply: + description: Power supply for buck4 + vinb5-supply: + description: Power supply for buck5 + vinb6-supply: + description: Power supply for buck6 + vinb7-supply: + description: Power supply for buck7 + vinb8-supply: + description: Power supply for buck8 + vinb9-supply: + description: Power supply for buck9 + + vinl1-supply: + description: Power supply for LDO3, LDO10, LDO26, LDO27 + vinl2-supply: + description: Power supply for LDO13, LDO16, LDO25, LDO28 + vinl3-supply: + description: Power supply for LDO11, LDO14 + vinl4-supply: + description: Power supply for LDO4, LDO9 + vinl5-supply: + description: Power supply for LDO12, LDO17, LDO19, LDO23 + vinl6-supply: + description: Power supply for LDO18, LDO20, LDO21, LDO24 + vinl7-supply: + description: Power supply for LDO5, LDO22 + vinl8-supply: + description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15 + vinl9-supply: + description: Power supply for LDO2 + + wakeup-source: true + +required: + - compatible + - reg + - regulators + - s5m8767,pmic-buck-ds-gpios + +dependencies: + s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] + s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ] + s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ] + s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ] + +additionalProperties: false + +allOf: + - not: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck3-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + s5m8767,pmic-buck2-uses-gpio-dvs; + + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, + <&gpd1 1 GPIO_ACTIVE_LOW>, + <&gpd1 2 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + + BUCK1 { + regulator-name = "VDD_MIF"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; + wakeup-source; + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, + <&gpx2 4 GPIO_ACTIVE_LOW>, + <&gpx2 5 GPIO_ACTIVE_LOW>; + + clocks { + compatible = "samsung,s5m8767-clk"; + #clock-cells = <1>; + clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt"; + }; + + regulators { + LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + // ... + }; + }; + }; |