summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml99
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml99
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-flexcom.txt64
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt56
-rw-r--r--Documentation/devicetree/bindings/mfd/da9062.txt124
-rw-r--r--Documentation/devicetree/bindings/mfd/dlg,da9063.yaml251
-rw-r--r--Documentation/devicetree/bindings/mfd/google,cros-ec.yaml7
-rw-r--r--Documentation/devicetree/bindings/mfd/iqs62x.yaml2
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml2
-rw-r--r--Documentation/devicetree/bindings/mfd/syscon.yaml3
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,twl.yaml2
11 files changed, 429 insertions, 280 deletions
diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 0000000000..4aa36903e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+ The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+ subdevices, a PWM chip and a Display Controller.
+
+properties:
+ compatible:
+ enum:
+ - atmel,at91sam9n12-hlcdc
+ - atmel,at91sam9x5-hlcdc
+ - atmel,sama5d2-hlcdc
+ - atmel,sama5d3-hlcdc
+ - atmel,sama5d4-hlcdc
+ - microchip,sam9x60-hlcdc
+ - microchip,sam9x75-xlcdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: periph_clk
+ - const: sys_clk
+ - const: slow_clk
+ - const: lvds_pll_clk
+ minItems: 3
+
+ display-controller:
+ $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+ pwm:
+ $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/dma/at91.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ lcd_controller: lcd-controller@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk", "sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 0000000000..0dc6a40b63
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+ - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+ The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+ an I2C controller and an USART. Only one function can be used at a
+ time and is chosen at boot time according to the device tree.
+
+properties:
+ compatible:
+ oneOf:
+ - const: atmel,sama5d2-flexcom
+ - items:
+ - const: microchip,sam9x7-flexcom
+ - const: atmel,sama5d2-flexcom
+ - items:
+ - const: microchip,sama7g5-flexcom
+ - const: atmel,sama5d2-flexcom
+
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description:
+ One range for the full I/O register region. (including USART,
+ TWI and SPI registers).
+ items:
+ maxItems: 3
+
+ atmel,flexcom-mode:
+ description: |
+ Specifies the flexcom mode as follows:
+ 1: USART
+ 2: SPI
+ 3: I2C.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3]
+
+patternProperties:
+ "^serial@[0-9a-f]+$":
+ type: object
+ description:
+ Child node describing USART. See atmel-usart.txt for details
+ of USART bindings.
+
+ "^spi@[0-9a-f]+$":
+ type: object
+ description:
+ Child node describing SPI. See ../spi/spi_atmel.txt for details
+ of SPI bindings.
+
+ "^i2c@[0-9a-f]+$":
+ $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+ description:
+ Child node describing I2C.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ flx0: flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ atmel,flexcom-mode = <2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index af692e8833..0000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible: Should be "atmel,sama5d2-flexcom"
- or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom"
-- reg: Should be the offset/length value for Flexcom dedicated
- I/O registers (without USART, TWI or SPI registers).
-- clocks: Should be the Flexcom peripheral clock from PMC.
-- #address-cells: Should be <1>
-- #size-cells: Should be <1>
-- ranges: Should be one range for the full I/O register region
- (including USART, TWI and SPI registers).
-- atmel,flexcom-mode: Should be one of the following values:
- - <1> for USART
- - <2> for SPI
- - <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
- compatible = "atmel,sama5d2-flexcom";
- reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xf8034000 0x800>;
- atmel,flexcom-mode = <2>;
-
- spi@400 {
- compatible = "atmel,at91rm9200-spi";
- reg = <0x400 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flx0_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx0_clk>;
- clock-names = "spi_clk";
- atmel,fifo-size = <32>;
-
- flash@0 {
- compatible = "atmel,at25f512b";
- reg = <0>;
- spi-max-frequency = <20000000>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 7de696eefa..0000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
- "atmel,at91sam9n12-hlcdc"
- "atmel,at91sam9x5-hlcdc"
- "atmel,sama5d2-hlcdc"
- "atmel,sama5d3-hlcdc"
- "atmel,sama5d4-hlcdc"
- "microchip,sam9x60-hlcdc"
- "microchip,sam9x75-xlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
- Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
- hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
- reg = <0xf0030000 0x2000>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
- clock-names = "periph_clk","sys_clk", "slow_clk";
- interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index e4eedd3bd2..0000000000
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device Supply Names Description
------- ------------ -----------
-da9062-regulator : : LDOs & BUCKs
-da9062-rtc : : Real-Time Clock
-da9062-onkey : : On Key
-da9062-watchdog : : Watchdog Timer
-da9062-thermal : : Thermal
-da9062-gpio : : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device Supply Names Description
------- ------------ -----------
-da9062-regulator : : LDOs & BUCKs
-da9062-onkey : : On Key
-da9062-watchdog : : Watchdog Timer
-da9062-thermal : : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
- "dlg,da9062" for DA9062
- "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
- modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
- The DA9062 regulators are bound using their names listed below:
-
- buck1 : BUCK_1
- buck2 : BUCK_2
- buck3 : BUCK_3
- buck4 : BUCK_4
- ldo1 : LDO_1
- ldo2 : LDO_2
- ldo3 : LDO_3
- ldo4 : LDO_4
-
- The DA9061 regulators are bound using their names listed below:
-
- buck1 : BUCK_1
- buck2 : BUCK_2
- buck3 : BUCK_3
- ldo1 : LDO_1
- ldo2 : LDO_2
- ldo3 : LDO_3
- ldo4 : LDO_4
-
- The component follows the standard regulator framework and the bindings
- details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
- regulator-initial-mode may be specified for buck regulators using mode values
- from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
- with the DA9062. There are currently no entries in this binding, however
- compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-wdt.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
- pmic0: da9062@58 {
- compatible = "dlg,da9062";
- reg = <0x58>;
- interrupt-parent = <&gpio6>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9062-rtc";
- };
-
- regulators {
- DA9062_BUCK1: buck1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <500000>;
- regulator-max-microamp = <2000000>;
- regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
- regulator-boot-on;
- };
- DA9062_LDO1: ldo1 {
- regulator-name = "LDO_1";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- };
- };
- };
-
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index c5a7e10d7d..51612dc227 100644
--- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
maintainers:
- Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@ description: |
moment where all voltage monitors are disabled. Next, as da9063 only supports
UV *and* OV monitoring, both must be set to the same severity and value
(0: disable, 1: enable).
+ Product information for the DA906{3L,3,2,1} devices can be found here:
+ - https://www.dialog-semiconductor.com/products/da9063l
+ - https://www.dialog-semiconductor.com/products/da9063
+ - https://www.dialog-semiconductor.com/products/da9062
+ - https://www.dialog-semiconductor.com/products/da9061
properties:
compatible:
enum:
+ - dlg,da9061
+ - dlg,da9062
- dlg,da9063
- dlg,da9063l
@@ -35,20 +42,28 @@ properties:
"#interrupt-cells":
const: 2
- dlg,use-sw-pm:
- type: boolean
- description:
- Disable the watchdog during suspend.
- Only use this option if you can't use the watchdog automatic suspend
- function during a suspend (see register CONTROL_B).
+ gpio-controller: true
- watchdog:
+ "#gpio-cells":
+ const: 2
+
+ gpio:
type: object
- $ref: /schemas/watchdog/watchdog.yaml#
- unevaluatedProperties: false
+ additionalProperties: false
properties:
compatible:
- const: dlg,da9063-watchdog
+ const: dlg,da9062-gpio
+
+ onkey:
+ $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+ regulators:
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+ $ref: /schemas/regulator/regulator.yaml
+ unevaluatedProperties: false
rtc:
type: object
@@ -56,37 +71,86 @@ properties:
unevaluatedProperties: false
properties:
compatible:
- const: dlg,da9063-rtc
+ enum:
+ - dlg,da9062-rtc
+ - dlg,da9063-rtc
- onkey:
- type: object
- $ref: /schemas/input/input.yaml#
- unevaluatedProperties: false
- properties:
- compatible:
- const: dlg,da9063-onkey
+ thermal:
+ $ref: /schemas/thermal/dlg,da9062-thermal.yaml
- dlg,disable-key-power:
- type: boolean
- description: |
- Disable power-down using a long key-press.
- If this entry does not exist then by default the key-press triggered
- power down is enabled and the OnKey will support both KEY_POWER and
- KEY_SLEEP.
+ watchdog:
+ $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
- regulators:
+patternProperties:
+ "^(.+-hog(-[0-9]+)?)$":
type: object
- additionalProperties: false
- patternProperties:
- "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
- $ref: /schemas/regulator/regulator.yaml
- unevaluatedProperties: false
+
+ required:
+ - gpio-hog
required:
- compatible
- reg
- - interrupts
- - interrupt-controller
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - dlg,da9063
+ - dlg,da9063l
+ then:
+ properties:
+ gpio-controller: false
+ "#gpio-cells": false
+ gpio: false
+ regulators:
+ patternProperties:
+ "^buck[1-4]$": false
+ thermal: false
+ required:
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - dlg,da9062
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+ required:
+ - gpio
+ - onkey
+ - rtc
+ - thermal
+ - watchdog
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - dlg,da9061
+ then:
+ properties:
+ gpio-controller: false
+ "#gpio-cells": false
+ gpio: false
+ regulators:
+ patternProperties:
+ "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+ rtc: false
+ required:
+ - onkey
+ - thermal
+ - watchdog
additionalProperties: false
@@ -99,10 +163,10 @@ examples:
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
- #interrupt-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
rtc {
compatible = "dlg,da9063-rtc";
@@ -143,4 +207,121 @@ examples:
};
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@58 {
+ compatible = "dlg,da9062";
+ reg = <0x58>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ sd0-pwr-sel-hog {
+ gpio-hog;
+ gpios = <1 0>;
+ input;
+ line-name = "SD0_PWR_SEL";
+ };
+
+ sd1-pwr-sel-hog {
+ gpio-hog;
+ gpios = <2 0>;
+ input;
+ line-name = "SD1_PWR_SEL";
+ };
+
+ sw-et0-en-hog {
+ gpio-hog;
+ gpios = <3 0>;
+ input;
+ line-name = "SW_ET0_EN#";
+ };
+
+ pmic-good-hog {
+ gpio-hog;
+ gpios = <4 0>;
+ output-high;
+ line-name = "PMIC_PGOOD";
+ };
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ };
+
+ onkey {
+ compatible = "dlg,da9062-onkey";
+ };
+
+ regulators {
+ buck1 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+ regulator-always-on;
+ };
+ buck2 {
+ regulator-name = "vdd_soc";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1380000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+ regulator-always-on;
+ };
+ buck3 {
+ regulator-name = "vdd_ddr3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+ regulator-always-on;
+ };
+ buck4 {
+ regulator-name = "vdd_eth";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+ regulator-always-on;
+ };
+ ldo1 {
+ regulator-name = "vdd_snvs";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ ldo2 {
+ regulator-name = "vdd_high";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ ldo3 {
+ regulator-name = "vdd_eth_io";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+ ldo4 {
+ regulator-name = "vdd_emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+
+ rtc {
+ compatible = "dlg,da9062-rtc";
+ };
+
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ };
+
+ watchdog {
+ compatible = "dlg,da9062-watchdog";
+ dlg,use-sw-pm;
+ };
+ };
+ };
...
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index e1ca4f297c..aac8819bd0 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -93,6 +93,11 @@ properties:
'#size-cells':
const: 0
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
typec:
$ref: /schemas/chrome/google,cros-ec-typec.yaml#
@@ -275,6 +280,8 @@ examples:
interrupts = <99 0>;
interrupt-parent = <&gpio7>;
spi-max-frequency = <5000000>;
+ #gpio-cells = <2>;
+ gpio-controller;
proximity {
compatible = "google,cros-ec-mkbp-proximity";
diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
index 044cd7542c..f438c23749 100644
--- a/Documentation/devicetree/bindings/mfd/iqs62x.yaml
+++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml
@@ -31,7 +31,7 @@ properties:
maxItems: 1
firmware-name:
- $ref: /schemas/types.yaml#/definitions/string
+ maxItems: 1
description:
Specifies the name of the calibration and configuration file selected by
the driver. If this property is omitted, the name is chosen based on the
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index 798705ab6a..b97d770153 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -19,6 +19,7 @@ properties:
- enum:
- qcom,msm8976-tcsr
- qcom,msm8998-tcsr
+ - qcom,qcm2290-tcsr
- qcom,qcs404-tcsr
- qcom,sc7180-tcsr
- qcom,sc7280-tcsr
@@ -28,6 +29,7 @@ properties:
- qcom,sdx55-tcsr
- qcom,sdx65-tcsr
- qcom,sm4450-tcsr
+ - qcom,sm6115-tcsr
- qcom,sm8150-tcsr
- qcom,sm8250-tcsr
- qcom,sm8350-tcsr
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 084b5c2a2a..9d55bee155 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -72,7 +72,10 @@ properties:
- rockchip,rk3588-qos
- rockchip,rv1126-qos
- starfive,jh7100-sysmain
+ - ti,am62-usb-phy-ctrl
- ti,am654-dss-oldi-io-ctrl
+ - ti,am654-serdes-ctrl
+ - ti,j784s4-pcie-ctrl
- const: syscon
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index c04d57ba22..52ed228fb1 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -34,6 +34,8 @@ properties:
interrupt-controller: true
+ system-power-controller: true
+
"#interrupt-cells":
const: 1