diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/mtd-physmap.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/mtd-physmap.yaml | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml new file mode 100644 index 0000000000..18f6733408 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...) + +maintainers: + - Rob Herring <robh@kernel.org> + +description: | + Flash chips (Memory Technology Devices) are often used for solid state + file systems on embedded devices. + +allOf: + - $ref: mtd.yaml# + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - amd,s29gl01gp + - amd,s29gl032a + - amd,s29gl256n + - amd,s29gl512n + - arm,versatile-flash + - arm,vexpress-flash + - cortina,gemini-flash + - cypress,hyperflash + - ge,imp3a-firmware-mirror + - ge,imp3a-paged-flash + - gef,ppc9a-firmware-mirror + - gef,ppc9a-paged-flash + - gef,sbc310-firmware-mirror + - gef,sbc310-paged-flash + - gef,sbc610-firmware-mirror + - gef,sbc610-paged-flash + - intel,28f128j3 + - intel,dt28f160 + - intel,ixp4xx-flash + - intel,JS28F128 + - intel,JS28F640 + - intel,PC28F640P30T85 + - numonyx,js28f00a + - numonyx,js28f128 + - sst,sst39vf320 + - xlnx,xps-mch-emc-2.00.a + - enum: + - cfi-flash + - jedec-flash + - items: + - enum: + - cypress,cy7c1019dv33-10zsxi + - arm,vexpress-psram + - const: mtd-ram + - enum: + - cfi-flash + - jedec-flash + - mtd-ram + - mtd-rom + + reg: + description: | + It's possible to (optionally) define multiple "reg" tuples so that + non-identical chips can be described in one node. + minItems: 1 + maxItems: 8 + + bank-width: + description: Width (in bytes) of the bank. Equal to the device width times + the number of interleaved chips. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + device-width: + description: + Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2 ] + + no-unaligned-direct-access: + type: boolean + description: | + Disables the default direct mapping of the flash. + + On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems + with JFFS2 usage, as the local bus (LPB) doesn't support unaligned + accesses as implemented in the JFFS2 code via memcpy(). By defining + "no-unaligned-direct-access", the flash will not be exposed directly to + the MTD users (e.g. JFFS2) any more. + + linux,mtd-name: + description: + Allows specifying the mtd name for retro capability with physmap-flash + drivers as boot loader pass the mtd partition via the old device name + physmap-flash. + $ref: /schemas/types.yaml#/definitions/string + + use-advanced-sector-protection: + type: boolean + description: | + Enables support for the advanced sector protection (Spansion: PPB - + Persistent Protection Bits) locking. + + erase-size: + description: The chip's physical erase block size in bytes. + $ref: /schemas/types.yaml#/definitions/uint32 + + addr-gpios: + description: + List of GPIO descriptors that will be used to address the MSBs address + lines. The order goes from LSB to MSB. + minItems: 1 + maxItems: 8 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + big-endian: true + little-endian: true + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + const: cortina,gemini-flash +then: + properties: + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon controller + required: + - syscon + +# FIXME: A parent bus may define timing properties +additionalProperties: true + +examples: + - | + + flash@ff000000 { + compatible = "cfi-flash"; + reg = <0xff000000 0x01000000>; + bank-width = <4>; + device-width = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x01000000>; + + fs@0 { + label = "fs"; + reg = <0 0xf80000>; + }; + firmware@f80000 { + label = "firmware"; + reg = <0xf80000 0x80000>; + read-only; + }; + }; + + - | + /* An example with multiple "reg" tuples */ + + flash@0 { + compatible = "intel,PC28F640P30T85", "cfi-flash"; + reg = <0x00000000 0x02000000>, + <0x02000000 0x02000000>; + bank-width = <2>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x04000000>; + + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; + + - | + /* An example using SRAM */ + bus { + #address-cells = <2>; + #size-cells = <1>; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + }; + + - | + /* An example using addr-gpios */ + #include <dt-bindings/gpio/gpio.h> + + flash@20000000 { + compatible = "cfi-flash"; + reg = <0x20000000 0x02000000>; + bank-width = <2>; + addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0x02000000>, + <1 0x02000000 0x02000000>; + + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; +... |